Add a better description to the summary for multipath tests. e.g.,
INFO: Running IPv6 multipath tests
TEST: ECMP [PASS]
INFO: Expected ratio 1.00 Measured ratio 1.02
TEST: Weighted MP 2:1 [PASS]
INFO: Expected ratio 2.00 Measured ratio 2.02
TEST: Weighted MP 11:45 [PASS]
INFO: Expected ratio 4.09 Measured ratio 4.03
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Debian jessie ping can not handle IPv6 addresses so the command
fails. Use PING6 which is set to ping6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the packet stats have a difference of 0, the test output shows:
INFO: Expected ratio 2.00 Measured ratio
Runtime error (func=(main), adr=9): Divide by zero
(standard_in) 2: syntax error
(standard_in) 1: syntax error
./router_multipath.sh: line 187: test: : integer expression expected
TEST: Multipath [FAIL]
Too large discrepancy between expected and measured ratios
Handle the 0 and display a cleaner message:
INFO: Running IPv6 multipath tests
TEST: Multipath [FAIL]
Packet difference is 0
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Capabilities of tc command are irrelevant for router tests:
$ ./router.sh
SKIP: iproute2 too old, missing shared block support
Add a CHECK_TC flag and only check tc capabilities if set. Add flag to
tc_common.sh and have it sourced before lib.sh
Also, if the command lacks some feature the test should exit non-0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: bfff486265 ("net: fib_rules: support for match on ip_proto, sport and dport")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to RFC 4429 (section 3.1), adding new IPv6 addresses as
optimistic addresses is acceptable, as long as the implementation
follows some rules:
* Optimistic DAD SHOULD only be used when the implementation is aware
that the address is based on a most likely unique interface
identifier (such as in [RFC2464]), generated randomly [RFC3041],
or by a well-distributed hash function [RFC3972] or assigned by
Dynamic Host Configuration Protocol for IPv6 (DHCPv6) [RFC3315].
Optimistic DAD SHOULD NOT be used for manually entered
addresses.
Thus, it seems reasonable to allow userspace to set the optimistic flag
when adding new addresses.
We must not let userspace set NODAD + OPTIMISTIC, since if the kernel is
not performing DAD we would never clear the optimistic flag. We must
also ignore userspace's request to add OPTIMISTIC flag to addresses that
have already completed DAD (addresses that don't have the TENTATIVE
flag, or that have the DADFAILED flag).
Then we also need to clear the OPTIMISTIC flag on permanent addresses
when DAD fails. Otherwise, IFA_F_OPTIMISTIC addresses added by userspace
can still be used after DAD has failed, because in
ipv6_chk_addr_and_flags(), IFA_F_OPTIMISTIC overrides IFA_F_TENTATIVE.
Setting IFA_F_OPTIMISTIC from userspace is conditional on
CONFIG_IPV6_OPTIMISTIC_DAD and the optimistic_dad sysctl.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix trivial spelling mistake "greater then" -> "greater than".
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a part of working on MII time stamping infrastructure, I was trying
to figure out how netdev->phydev gets assigned, and I stumbled across
this. Ever since the new phylink code came in, the field is assigned
twice.
The function, phylink_connect_phy(), calls
phy_attach_direct()
phylink_bringup_phy()
and phy_attach_direct() sets
dev->phydev = phydev;
but phylink_bringup_phy() then sets the same field again:
pl->netdev->phydev = phy;
Similarly, the function, phylink_of_phy_connect(), calls
of_phy_attach()
phy_attach_direct()
phylink_bringup_phy()
The removal code is also duplicated:
phylink_disconnect_phy()
pl->netdev->phydev = NULL;
phy_disconnect()
phy_detach()
phydev->attached_dev->phydev = NULL;
This patch removes the redundant assignments, restricting manipulation
of the netdev.phydev field to phy_attach_direct() and phy_detach().
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: Link Layer Control enhancements
here is a series of smc patches enabling SMC communication with peers
supporting more than one link per link group.
The first three patches are preparing code cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the processing of a DELETE LINK message has started,
new connections should not be added to the link group that
is about to terminate.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add initial support for the LLC messages ADD LINK and DELETE LINK.
Introduce a link state field. Extend the initial LLC handshake with
ADD LINK processing.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC does not support eyecatchers in RMB elements,
decline peers requesting this support.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process and respond to CONFIRM RKEY and DELETE RKEY messages.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TEST LINK message responses, which also serves as preparation for
support of sockopt TCP_KEEPALIVE.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The daddr field holds the destination IPv4 address. The field was set but
never used and can be removed. The addr field was a left-over from an
earlier version of non-blocking connects and can be removed.
The result of the call to kernel_getpeername is not used, the call can be
removed. Non-blocking connects are working, so remove restriction comment.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function smc_netinfo_by_tcpsk() belongs to CLC handling.
Move it to smc_clc.c and rename to smc_clc_netinfo_by_tcpsk.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove structures used internal only from headers.
And remove an extra function parameter.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz says:
====================
ipmr, ip6mr: Align multicast routing for IPv4 & IPv6
Historically ip6mr was based [cut-n-paste] on ipmr and the two have not
diverged too much. Apparently as ipv4 multicast routing is more common
than its ipv6 brethren modifications since then are mostly one-way,
affecting ipmr while leaving ip6mr unchanged.
This series is meant to re-factor both ipmr and ip6mr into having common
structures [and some functionality], adding 2 new common files -
mroute_base.h and ipmr_base.c.
The series begins by bringing ip6mr up to speed to some of the changes
applied in the past to ipmr [#2, #3].
It is then possible to re-factor a lot of the common structures -
vif devices [#1], mr_table [#4] mfc_cache [#6], and use the common
structures in both ipmr and ip6mr.
The rest of the patches re-factor some choice flows used by both ipmr
and ip6mr and eliminates duplicity.
This series would later allow for easy extension of ipmr offloading
to support ip6mr offloading as well, as almost all structures
related to the offloading would be shared between the two protocols.
Changes from previous versions
------------------------------
v2:
- #6 Corrected reporting logic when hitting an unresolved cache
- #7 Addressed kernel doc style [Thanks Nikolay]
RFC -> v1:
- Corrected support for CONFIG_IP{,V6}_MROUTE_MULTIPLE_TABLES
- Addressed a couple of kbuild test robot issues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The various MFC entries are being held in the same kind of mr_tables
for both ipmr and ip6mr, and their traversal logic is identical.
Also, with the exception of the addresses [and other small tidbits]
the major bulk of the nla setting is identical.
Unite as much of the dumping as possible between the two.
Notice this requires creating an mr_table iterator for each, as the
for-each preprocessor macro can't be used by the common logic.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MFC_NOTIFY exists in ip6mr, probably as some legacy code
[was already removed for ipmr in commit
06bd6c0370 ("net: ipmr: remove unused MFC_NOTIFY flag and make the flags enum").
Remove it from ip6mr as well, and move the enum into a common file;
Notice MFC_OFFLOAD is currently only used by ipmr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as previously done with the mfc seq, the logic for the vif seq is
refactored to be shared between ipmr and ip6mr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the exception of the final dump, ipmr and ip6mr have the exact same
seq logic for traversing a given mr_table. Refactor that code and make
it common.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipmr and ip6mr utilize the exact same methods for searching the
hashed resolved connections, difference being only in the construction
of the hash comparison key.
In order to unite the flow, introduce an mr_table operation set that
would contain the protocol specific information required for common
flows, in this case - the hash parameters and a comparison key
representing a (*,*) route.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mfc_cache and mfc6_cache are almost identical - the main difference is
in the origin/group addresses and comparison-key. Make a common
structure encapsulating most of the multicast routing logic - mr_mfc
and convert both ipmr and ip6mr into using it.
For easy conversion [casting, in this case] mr_mfc has to be the first
field inside every multicast routing abstraction utilizing it.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that both ipmr and ip6mr are using the same mr_table structure,
we can have a common function to allocate & initialize a new instance.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following previous changes to ip6mr, mr_table and mr6_table are
basically the same [up to mr6_table having additional '6' suffixes to
its variable names].
Move the common structure definition into a common header; This
requires renaming all references in ip6mr to variables that had the
distinct suffix.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 8fb472c09b ("ipmr: improve hash scalability") ipmr has
been using rhashtable as a basis for its mfc routes, but ip6mr is
currently still using the old private MFC hash implementation.
Align ip6mr to the current ipmr implementation.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ipmr the mr_table socket is handled under RCU. Introduce the same
for ip6mr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The two implementations have almost identical structures - vif_device and
mif_device. As a step toward uniforming the mr_tables, eliminate the
mif_device and relocate the vif_device definition into a new common
header file.
Also, introduce a common initializing function for setting most of the
vif_device fields in a new common source file. This requires modifying
the ipv{4,6] Kconfig and ipv4 makefile as we're introducing a new common
config option - CONFIG_IP_MROUTE_COMMON.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu says:
====================
fib_rules: support sport, dport and proto match
This series extends fib rule match support to include sport, dport
and ip proto match (to complete the 5-tuple match support).
Common use-cases of Policy based routing in the data center require
5-tuple match. The last 2 patches in the series add a call to flow dissect
in the fwd path if required by the installed fib rules (controlled by a flag).
v1:
- Fix errors reported by kbuild and feedback on RFC
- extend port match uapi to accomodate port ranges
v2:
- address comments from Nikolay, David Ahern and Paolo (Thanks!)
Pending things I will submit separate patches for:
- extack for fib rules
- fib rules test (as requested by david ahern)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dissect flow in fwd path if fib rules require it. Controlled by
a flag to avoid penatly for the common case. Flag is set when fib
rules with sport, dport and proto match that require flow dissect
are installed. Also passes the dissected hash keys to the multipath
hash function when applicable to avoid dissecting the flow again.
icmp packets will continue to use inner header for hash
calculations.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dissect flow in fwd path if fib rules require it. Controlled by
a flag to avoid penatly for the common case. Flag is set when fib
rules with sport, dport and proto match that require flow dissect
are installed. Also passes the dissected hash keys to the multipath
hash function when applicable to avoid dissecting the flow again.
icmp packets will continue to use inner header for hash
calculations (Thanks to Nikolay Aleksandrov for some review here).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
support to match on src port, dst port and ip protocol.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
support to match on src port, dst port and ip protocol.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uapi for ip_proto, sport and dport range match
in fib rules.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of MSI-X the interrupt number may differ from pcidev->irq.
Fix this by using pci_irq_vector().
Fixes: 6c6aa15fde ("r8169: improve interrupt handling")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2018-02-28
This series contains updates to fm10k only.
Jake provides all the changes in this series, starting with making the
function header comments consistent and to align with how the kernel
documentation expects it. Also cleaned up code comment as well as bump
the driver version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
selftests: forwarding: Add VRF-based tests
One of the nice things about network namespaces is that they allow one
to easily create and test complex environments.
Unfortunately, these namespaces can not be used with actual switching
ASICs, as their ports can not be migrated to other network namespaces
(NETIF_F_NETNS_LOCAL) and most of them probably do not support the
L1-separation provided by namespaces.
However, a similar kind of flexibility can be achieved by using VRFs and
by looping the switch ports together. For example:
br0
+
vrf-h1 | vrf-h2
+ +---+----+ +
| | | |
192.0.2.1/24 + + + + 192.0.2.2/24
swp1 swp2 swp3 swp4
+ + + +
| | | |
+--------+ +--------+
The VRFs act as lightweight namespaces representing hosts connected to
the switch.
This approach for testing switch ASICs has several advantages over the
traditional method that requires multiple physical machines, to name a
few:
1. Only the device under test (DUT) is being tested without noise from
other system.
2. Ability to easily provision complex topologies. Testing bridging
between 4-ports LAGs or 8-way ECMP requires many physical links that are
not always available. With the VRF-based approach one merely needs to
loopback more ports.
These tests are written with switch ASICs in mind, but they can be run
on any Linux box using veth pairs to emulate physical loopbacks.
v2:
* Order local variables declaration according to function arguments
order (Petr)
v1:
* Change location to net/forwarding instead of forwarding/
* Add ability to pause on failure
* Add ability to pause on cleanup
* Make configuration file optional
* Make ping/ping6/mz configurable
* Add more tc tests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test shared block infrastructure. This is a basic test that shares TC
block in between 2 clsact qdiscs.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests chains matching and goto chain action.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add first part of actions tests. This patch only contains tests of gact
ok/drop/trap and mirred redirect egress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add first part of flower tests. This patch only contains dst/src ip/mac
matching.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have one host generate 16K IPv6 echo requests with a random flow label
and check that they are distributed between both multipath links
according to the provided weights.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use different weights for the multipath route configured on the first
router and check that the different flows generated by the first host
are distributed according to the provided weights.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a topology with two hosts, each directly connected to a different
router. Both routers are connected using two links, enabling multipath
routing.
Test IPv4 and IPv6 ping using default MTU and large MTU.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configure two hosts which are directly connected to the same router and
test IPv4 and IPv6 ping. Use a large MTU and check that ping is
unaffected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for unknown unicast and unregistered multicast flooding.
For each traffic type, turn off flooding on one bridged port and inject
a packet of the specified type through the second bridged port. Make
sure the packet was not received by checking the ACL counters on the
other end. Later, turn on flooding and make sure the packet was
received.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
