When entries are being bolted unconditionally it's possible that the boot
loader has established mappings that are within range that we don't want
to clobber. Perform some basic validation to ensure that the new mapping
is out of range before allowing the entry setup to take place.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
PCI_IOAPIC is used for PCI hotplug, Moorestown does not have ACPI PCI
hotplug, as it does not have ACPI. This unnecessary dependency causes
X86_MRST fail to be selected if ACPI is not selected.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1267550368-7435-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Adding vbus_pin_inverted so that the usb detect pin can be active high
or low depending on HW implementation also replaced the
gpio_get_value(udc->vbus_pin); with a call to vbus_is_present(udc); This
allows the driver to be loaded and save about 0,15W on the consumption.
Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is a Full / Low speed only USB host for the i.MX21.
Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This centralize some spread-out initialization of descriptors into
one function and cleans up the error paths.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits)
omap2: Initialize Menelaus and MMC for N8X0
AM3517 EVM: correct typo - tca6416 mispelt as tca6516
AM3517 EVM: Enable I2C support
AM35x: Enable OMAP_MUX in defconfig
AM35x: Add missing GPIO mux config for EHCI port
Zoom3: Defconfig update
omap: i2c: Fix muxing for command line enabled bus
OMAP4: clock: Remove clock hacks from timer-gp.c
OMAP4: clock: Add dummy clock nodes for interface clocks
OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck
OMAP2+ clock: revise omap2_clk_{disable,enable}()
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
OMAP clockdomain: if no autodeps exist, don't try to add or remove them
OMAP hwmod: add hwmod class support
OMAP hwmod: convert header files with static allocations into C files
OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con
OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code
OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
OMAP4 clock: drop the ALWAYS_ENABLED clock flag
OMAP clock: drop RATE_FIXED clock flag
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6:
sparc: Support show_unhandled_signals.
sparc: use __ratelimit
sunxvr500: Additional PCI id for sunxvr500 driver
sparc: use asm-generic/scatterlist.h
sparc64: If 'slot-names' property exist, create sysfs PCI slot information.
sparc: remove trailing space in messages
sparc: remove redundant return statements
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits)
virtio_net: remove forgotten assignment
be2net: fix tx completion polling
sis190: fix cable detect via link status poll
net: fix protocol sk_buff field
bridge: Fix build error when IGMP_SNOOPING is not enabled
bnx2x: Tx barriers and locks
scm: Only support SCM_RIGHTS on unix domain sockets.
vhost-net: restart tx poll on sk_sndbuf full
vhost: fix get_user_pages_fast error handling
vhost: initialize log eventfd context pointer
vhost: logging thinko fix
wireless: convert to use netdev_for_each_mc_addr
ethtool: do not set some flags, if others failed
ipoib: returned back addrlen check for mc addresses
netlink: Adding inode field to /proc/net/netlink
axnet_cs: add new id
bridge: Make IGMP snooping depend upon BRIDGE.
bridge: Add multicast count/interval sysfs entries
bridge: Add hash elasticity/max sysfs entries
bridge: Add multicast_snooping sysfs toggle
...
Trivial conflicts in Documentation/feature-removal-schedule.txt
This moves the pmb_remap_caller() mapping logic out in to
pmb_bolt_mapping(), which enables us to establish fixed mappings in
places such as the NUMA code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This plugs in an early_param for permitting transparent PMB-backed
ioremapping to be enabled/disabled. For the time being, we use a
default-disabled policy.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This implements a fairly significant overhaul of the dynamic PMB mapping
code. The primary change here is that the PMB gets its own VMA that
follows the uncached mapping and we attempt to be a bit more intelligent
with dynamic sizing, multi-entry mapping, and so forth.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch extends the .device_terminate_all() method of the shdma driver
to return number of bytes transfered in the current descriptor.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
DMA CHCR register layout is equal on sh7722 and sh7724, reuse definitions.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Separate SH DMA headers into ones, commonly used by both drivers, and ones,
specific to each of them. This will make the future development of the
dmaengine driver easier.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The shdma dmaengine driver currently uses numerous macros to support various
platforms, selected by ifdef's. Convert it to use platform device resources and
lists of channel descriptors to specify register locations, interrupt numbers
and other system-specific configuration variants. Unavoidably, we have to
simultaneously convert all shdma users to provide those resources.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Configure SIU port B pins and register the WM8978 audio codec.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch is required to use the SIU ASoC driver on sh7722 systems.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits)
DaVinci DM365: Adding support for SPI EEPROM
DaVinci DM365: Adding DM365 SPI support
DaVinci DM355: Modifications to DM355 SPI support
DaVinci: SPI: Adding header file for SPI support.
davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup
davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()
DaVinci: DM365: Voice codec support for the DM365 SoC
davinci: clock: let clk->set_rate function sleep
Add SDA and SCL pin numbers to i2c platform data
davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138
davinci: build list of unused EDMA events dynamically
davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case
davinci: Keep count of channel controllers on a platform
davinci: Correct return value of edma_alloc_channel api
davinci: add CDCE949 support on DM6467 EVM
davinci: add support for CDCE949 clock synthesizer
davinci: da850/omap-l138 EVM: register for suspend support
davinci: da850/omap-l138: add support for SoC suspend
davinci: add power management support
DaVinci: DM365: Changing default queue for DM365.
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits)
Input: atkbd - release previously reserved keycodes 248 - 254
Input: add KEY_WPS_BUTTON definition
Input: ads7846 - add regulator support
Input: winbond-cir - fix suspend/resume
Input: gamecon - use pr_err() and friends
Input: gamecon - constify some of the setup structures
Input: gamecon - simplify pad type handling
Input: gamecon - simplify coordinate calculation for PSX
Input: gamecon - fix some formatting issues
Input: gamecon - add rumble support for N64 pads
Input: wacom - add device type to device name string
Input: s3c24xx_ts - report touch only when stylus is down
Input: s3c24xx_ts - re-enable IRQ on resume
Input: wacom - constify product features data
Input: wacom - use per-device instance of wacom_features
Input: sh_keysc - enable building on SH-Mobile ARM
Input: wacom - get features from driver info
Input: rotary-encoder - set gpio direction for each requested gpio
Input: sh_keysc - update the driver with mode 6
Input: sh_keysc - switch to using bitmaps
...
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: replace acpi_integer by u64
ACPICA: Update version to 20100121.
ACPICA: Remove unused uint32_struct type
ACPICA: Disassembler: Remove obsolete "Integer64" field in parse object
ACPICA: Remove obsolete ACPI_INTEGER (acpi_integer) type
ACPICA: Predefined name repair: fix NULL package elements
ACPICA: AcpiGetDevices: Eliminate unnecessary _STA calls
ACPICA: Update all ACPICA copyrights and signons to 2010
ACPICA: Update for new gcc-4 warning options
The DM365 Spectrum Digital EVM comes with an EEPROM
connected to SPI0.
This patch adds support for the SPI EEPROM.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch adds SPI init for DM365.
It does the following
1) Initializes SPI0
2) Defines resources to be used by SPI0
3) Adds platform data for SPI0
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch does the following
1) Minor change to the SPI clocks making it
similar to DM365.
2) Changing the interrupt used by SPI0
3) Adding EDMA resources that can be used by SPI0
4) Adding platform specific data.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch adds "spi.h" header file that will be used by board and
architecture specific code.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Remove unneeded 'struct davinci_clk' wrapper around 'struct
clk_lookup' and use clk_lookup directly.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] wrong attribute of HUB chip written in uv_setup()
[IA64] remove trailing space in messages
[IA64] use asm-generic/scatterlist.h
[IA64] build arch/ia64/kernel/acpi-ext.o when CONFIG_ACPI
[IA64] Only build arch/ia64/kernel/acpi.o when CONFIG_ACPI
[IA64] Remove COMPAT_IA32 support
* 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block: (38 commits)
block: don't access jiffies when initialising io_context
cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds
block: fix for "Consolidate phys_segment and hw_segment limits"
cfq-iosched: quantum check tweak
blktrace: perform cleanup after setup error
blkdev: fix merge_bvec_fn return value checks
cfq-iosched: requests "in flight" vs "in driver" clarification
cciss: Fix problem with scatter gather elements in the scsi half of the driver
cciss: eliminate unnecessary pointer use in cciss scsi code
cciss: do not use void pointer for scsi hba data
cciss: factor out scatter gather chain block mapping code
cciss: fix scatter gather chain block dma direction kludge
cciss: simplify scatter gather code
cciss: factor out scatter gather chain block allocation and freeing
cciss: detect bad alignment of scsi commands at build time
cciss: clarify command list padding calculation
cfq-iosched: rethink seeky detection for SSDs
cfq-iosched: rework seeky detection
block: remove padding from io_context on 64bit builds
block: Consolidate phys_segment and hw_segment limits
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (252 commits)
ASoC: Check progress when reporting periods from i.MX FIQ handler
ASoC: Remove a unused variables from i.MX FIQ runtime data
ALSA: hda - Add/fix ALC269 FSC and Quanta models
ALSA: hda - Add ALC670 codec support
OMAP4: PMIC: Add support for twl6030 codec
ALSA: hda - remove unnecessary msleep on power state transitions
usb/gadget/{f_audio,gmidi}.c: follow recent changes in audio.h
ASoC: fsi: Modify over/under run error settlement
ASoC: OMAP4: Add McPDM platform driver
ASoC: OMAP4: Add support for McPDM
ASoC: OMAP: data_type and sync_mode configurable in audio dma
ALSA: hda - Add missing description in HD-Audio-Models.txt
ALSA: add support for Macbook Air 2,1 internal speaker
ALSA: usbaudio: consolidate header files
ALSA: usbmixer: bail out early when parsing audio class v2 descriptors
ALSA: usbaudio: implement basic set of class v2.0 parser
ALSA: usbaudio: introduce new types for audio class v2
ALSA: usbaudio: parse USB descriptors with structs
ALSA: hda - enable snoop for Intel Cougar Point
ALSA: hda - Remove identical definitions for macmini3 model
...
This marks the guest single-step API improvement of 94fe45da and
91586a3b with a capability flag to allow reliable detection by user
space.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.33)
Signed-off-by: Avi Kivity <avi@redhat.com>
We intercept #BP while in guest debugging mode. As VM exits due to
intercepted exceptions do not necessarily come with valid
idt_vectoring, we have to update event_exit_inst_len explicitly in such
cases. At least in the absence of migration, this ensures that
re-injections of #BP will find and use the correct instruction length.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.32, 2.6.33)
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes emulate_syscall(), emulate_sysenter() and
emulate_sysexit() to handle injected faults properly.
Even though original code injects faults in these functions,
we cannot handle these unless we use the different return
value from the UNHANDLEABLE case. So this patch use X86EMUL_*
codes instead of -1 and 0 and makes x86_emulate_insn() to
handle these propagated faults.
Be sure that, in x86_emulate_insn(), goto cannot_emulate and
goto done with rc equals X86EMUL_UNHANDLEABLE have same effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.
Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch injects page fault when reading descriptor in
load_guest_segment_descriptor() fails with FAULT.
Effects of this injection: This function is used by
kvm_load_segment_descriptor() which is necessary for the
following instructions:
- mov seg,r/m16
- jmp far
- pop ?s
This patch makes it possible to emulate the page faults
generated by these instructions. But be sure that unless
we change the kvm_load_segment_descriptor()'s ret value
propagation this patch has no effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Inject #UD if guest attempts to do so. This is in accordance to Intel
SDM.
Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert
them to raw_spinlock. No change for !RT kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instructions which are not allowed to have LOCK prefix should
generate #UD if one is used.
[avi: fold opcode 82 fix from another patch]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add CPL checking in case emulator is tricked into emulating
privilege instruction from userspace.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
POPF behaves differently depending on current CPU mode. Emulate correct
logic to prevent guest from changing flags that it can't change otherwise.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Make emulator check that vcpu is allowed to execute IN, INS, OUT,
OUTS, CLI, STI.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently when x86 emulator needs to access memory, page walk is done with
broadest permission possible, so if emulated instruction was executed
by userspace process it can still access kernel memory. Fix that by
providing correct memory access to page walker during emulation.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
For some instructions CPU behaves differently for real-mode and
virtual 8086. Let emulator know which mode cpu is in, so it will
not poke into vcpu state directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Use groups mechanism to decode 0F C7 instructions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Use groups mechanism to decode 0F BA instructions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Old method prematurely sets ESR and DEAR.
Move this part after we decide to inject interrupt,
which is more like hardware behave.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollis@penguinppc.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
If KVM_CREATE_IRQCHIP fail due to kvm_setup_default_irq_routing(),
ioapic device is not destroyed and kvm->arch.vioapic is not set to
NULL, this may cause KVM_GET_IRQCHIP and KVM_SET_IRQCHIP access to
unexcepted memory.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If fail to create pit, we should unregister kvm irq notifier
which register in kvm_create_pit().
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Following the new SDM. Now the bit is named "Ignore PAT memory type".
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_emulate_pio() and complete_pio() both read out the
RAX register value and copy it to a place into which
the value read out from the port will be copied later.
This patch removes this redundancy.
/*** snippet from arch/x86/kvm/x86.c ***/
int complete_pio(struct kvm_vcpu *vcpu)
{
...
if (!io->string) {
if (io->in) {
val = kvm_register_read(vcpu, VCPU_REGS_RAX);
memcpy(&val, vcpu->arch.pio_data, io->size);
kvm_register_write(vcpu, VCPU_REGS_RAX, val);
}
...
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently KVM pretends that pages with EPT mappings never got
accessed. This has some side effects in the VM, like swapping
out actively used guest pages and needlessly breaking up actively
used hugepages.
We can avoid those very costly side effects by emulating the
accessed bit for EPT PTEs, which should only be slightly costly
because pages pass through page_referenced infrequently.
TLB flushing is taken care of by kvm_mmu_notifier_clear_flush_young().
This seems to help prevent KVM guests from being swapped out when
they should not on my system.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
msr was tested above, so the second test is not needed.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@
if (x == NULL || ...) {
... when forall
return ...; }
... when != goto l;
when != x = e
when != &x
*x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Avi Kivity <avi@redhat.com>
String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes kvm_fix_hypercall() to propagate X86EMUL_*
info generated by emulator_write_emulated() to its callers:
suggested by Marcelo.
The effect of this is x86_emulate_insn() will begin to handle
the page faults which occur in emulator_write_emulated():
this should be OK because emulator_write_emulated_onepage()
always injects page fault when emulator_write_emulated()
returns X86EMUL_PROPAGATE_FAULT.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch fixes load_guest_segment_descriptor() to return
X86EMUL_PROPAGATE_FAULT when it tries to access the descriptor
table beyond the limit of it: suggested by Marcelo.
I have checked current callers of this helper function,
- kvm_load_segment_descriptor()
- kvm_task_switch()
and confirmed that this patch will change nothing in the
upper layers if we do not change the handling of this
return value from load_guest_segment_descriptor().
Next step: Although fixing the kvm_task_switch() to handle the
propagated faults properly seems difficult, and maybe not worth
it because TSS is not used commonly these days, we can fix
kvm_load_segment_descriptor(). By doing so, the injected #GP
becomes possible to be handled by the guest. The only problem
for this is how to differentiate this fault from the page faults
generated by kvm_read_guest_virt(). We may have to split this
function to achive this goal.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
flexpriority_enabled implies cpu_has_vmx_virtualize_apic_accesses() returning
true, so we don't need this check here.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Record failed msrs reads and writes, and the fact that they failed as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
- data is 64 bits wide, not unsigned long
- rw is confusingly named
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On HW task switch newly loaded segments should me marked as accessed.
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When cr0.mp is clear, the guest doesn't expect a #NM in response to
a WAIT instruction. Because we always keep cr0.mp set, it will get
a #NM, and potentially be confused.
Fix by keeping cr0.mp set only when the fpu is inactive, and passing
it through when inactive.
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Analyzed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 55fb1027c1cf9797dbdeab48180da530e81b1c39 doesn't update tlbcfg correctly.
Fix it.
And since guest OS likes 'fixed' hardware,
initialize tlbcfg everytime when guest access is useless.
So move this part to init code.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 513579e3a3 change the way
we emulate PVR/PIR,
which left PVR/PIR uninitialized on E500, and make guest puzzled.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Latest kernel start to access l1csr0 to contron L1.
We just tell guest no operation is on going.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If we fail to alloc page for vcpu->arch.mmu.pae_root, call to
free_mmu_pages() is unnecessary, which just do free the page
malloc for vcpu->arch.mmu.pae_root.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
'mask' is always a constant, so we can check whether it includes a bit that
might be owned by the guest very cheaply, and avoid the decache call. Saves
a few hundred bytes of module text.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Assume that if the guest executes clts, it knows what it's doing, and load the
guest fpu to prevent an #NM exception.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This allows accessing the guest fpu from the instruction emulator, as well as
being symmetric with kvm_put_guest_fpu().
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move to/from Control Registers chapter of Intel SDM says. "Reserved bits
in CR0 remain clear after any load of those registers; attempts to set
them have no impact". Control Register chapter says "Bits 63:32 of CR0 are
reserved and must be written with zeros. Writing a nonzero value to any
of the upper 32 bits results in a general-protection exception, #GP(0)."
This patch tries to implement this twisted logic.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To enable proper debug register emulation under all conditions, trap
access to all DR0..7. This may be optimized later on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Enhance mov dr instruction emulation used by SVM so that it properly
handles dr4/5: alias to dr6/7 if cr4.de is cleared. Otherwise return
EMULATE_FAIL which will let our only possible caller in that scenario,
ud_interception, re-inject UD.
We do not need to inject faults, SVM does this for us (exceptions take
precedence over instruction interceptions). For the same reason, the
value overflow checks can be removed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As we trap all debug register accesses, we do not need to switch real
DR6 at all. Clean up update_exception_bitmap at this chance, too.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make sure DR4 and DR5 are aliased to DR6 and DR7, respectively, if
CR4.DE is not set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Injecting GP without an error code is a bad idea (causes unhandled guest
exits). Moreover, we must not skip the instruction if we injected an
exception.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The return values from x86_emulate_ops are defined
in kvm_emulate.h as macros X86EMUL_*.
But in emulate.c, we are comparing the return values
from these ops with 0 to check if they're X86EMUL_CONTINUE
or not: X86EMUL_CONTINUE is defined as 0 now.
To avoid possible mistakes in the future, this patch
substitutes "X86EMUL_CONTINUE" for "0" that are being
compared with the return values from x86_emulate_ops.
We think that there are more places we should use these
macros, but the meanings of rc values in x86_emulate_insn()
were not so clear at a glance. If we use proper macros in
this function, we would be able to follow the flow of each
emulation more easily and, maybe, more securely.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As Avi noted:
>There are two problems with the kernel failure report. First, it
>doesn't report enough data - registers, surrounding instructions, etc.
>that are needed to explain what is going on. Second, it can flood
>dmesg, which is a pretty bad thing to do.
So we remove the emulation failure report in handle_invalid_guest_state(),
and would inspected the guest using userspace tool in the future.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
