AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-18 09:16:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

Browse Source 
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
This commit is contained in:
Linus Torvalds 2010-03-01 09:15:15 -08:00
commit ac0f6f927d
318 changed files with 12458 additions and 2082 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/arm/memory.txt
View File

@ -59,7 +59,11 @@ PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
This maps the platforms RAM, and typically
maps all platform RAM in a 1:1 relationship.
TASK_SIZE PAGE_OFFSET-1 Kernel module space
PKMAP_BASE PAGE_OFFSET-1 Permanent kernel mappings
One way of mapping HIGHMEM pages into kernel
space.
MODULES_VADDR MODULES_END-1 Kernel module space
Kernel modules inserted via insmod are
placed here using dynamic mappings.

6
Documentation/cachetlb.txt
View File

@ -88,12 +88,12 @@ changes occur:
This is used primarily during fault processing.
5) void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t pte)
unsigned long address, pte_t *ptep)
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
described by "pte" now exists at virtual address "address"
for address space "vma->vm_mm", in the software page tables.
now exists at virtual address "address" for address space
"vma->vm_mm", in the software page tables.
A port may use this information in any way it so chooses.
For example, it could use this event to pre-load TLB

2
arch/alpha/include/asm/pgtable.h
View File

@ -329,7 +329,7 @@ extern pgd_t swapper_pg_dir[1024];
* tables contain all the necessary information.
*/
extern inline void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte)
unsigned long address, pte_t *ptep)
{
}

51
arch/arm/Kconfig
View File

@ -12,6 +12,7 @@ config ARM
select HAVE_IDE
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
@ -20,6 +21,8 @@ config ARM
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@ -52,6 +55,9 @@ config HAVE_TCM
bool
select GENERIC_ALLOCATOR
config HAVE_PROC_CPU
bool
config NO_IOPORT
bool
@ -161,6 +167,11 @@ config ARCH_MTD_XIP
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
config ARM_L1_CACHE_SHIFT_6
bool
help
Setting ARM L1 cache line size to 64 Bytes.
if OPROFILE
config OPROFILE_ARMV6
@ -550,10 +561,20 @@ config ARCH_W90X900
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
config ARCH_NUC93X
bool "Nuvoton NUC93X CPU"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
help
Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
low-power and high performance MPEG-4/JPEG multimedia controller chip.
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
help
This enables support for Philips PNX4008 mobile platform.
@ -638,6 +659,7 @@ config ARCH_S5PC1XX
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
Samsung S5PC1XX series based systems
@ -785,6 +807,8 @@ source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/mach-nuc93x/Kconfig"
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
@ -867,6 +891,11 @@ config XSCALE_PMU
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
config CPU_HAS_PMU
depends on CPU_V6 || CPU_V7 || XSCALE_PMU
default y
bool
if !MMU
source "arch/arm/Kconfig-nommu"
endif
@ -921,6 +950,19 @@ config ARM_ERRATA_460075
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
(offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
They are architecturally defined to behave as the execution of a
clean operation followed immediately by an invalidate operation,
both performing to the same memory location. This functionality
is not correctly implemented in PL310 as clean lines are not
invalidated as a result of these operations. Note that this errata
uses Texas Instrument's secure monitor api.
endmenu
source "arch/arm/common/Kconfig"
@ -1171,6 +1213,14 @@ config HIGHPTE
depends on HIGHMEM
depends on !OUTER_CACHE
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
default y
help
Enable hardware performance counter support for perf events. If
disabled, perf events will use software events only.
source "mm/Kconfig"
config LEDS
@ -1230,6 +1280,7 @@ config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
naturally aligned on the bus, i.e., a 4 byte fetch must start at an

1
arch/arm/Makefile
View File

@ -171,6 +171,7 @@ machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
# Platform directory name. This list is sorted alphanumerically

6
arch/arm/boot/compressed/Makefile
View File

@ -5,7 +5,7 @@
#
HEAD = head.o
OBJS = misc.o
OBJS = misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
@ -106,10 +106,6 @@ lib1funcs = $(obj)/lib1funcs.o
$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
$(call cmd,shipped)
# Don't allow any static data in misc.o, which
# would otherwise mess up our GOT table
CFLAGS_misc.o := -Dstatic=
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)

45
arch/arm/boot/compressed/decompress.c Normal file
View File

@ -0,0 +1,45 @@
#define _LINUX_STRING_H_
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <linux/linkage.h>
#include <asm/string.h>
extern unsigned long free_mem_ptr;
extern unsigned long free_mem_end_ptr;
extern void error(char *);
#define STATIC static
#define ARCH_HAS_DECOMP_WDOG
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"
#endif
#ifdef CONFIG_KERNEL_LZO
#include "../../../../lib/decompress_unlzo.c"
#endif
void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
{
decompress(input, len, NULL, NULL, output, NULL, error);
}

20
arch/arm/boot/compressed/head.S
View File

@ -22,13 +22,13 @@
#if defined(CONFIG_DEBUG_ICEDCC)
#ifdef CONFIG_CPU_V6
.macro loadsp, rb
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_V7)
.macro loadsp, rb
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
wait: mrc p14, 0, pc, c0, c1, 0
@ -36,13 +36,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
.macro loadsp, rb
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
@ -58,7 +58,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
.endm
#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
.macro loadsp, rb, tmp
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
@ -67,13 +67,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
.macro loadsp, rb
.macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
.endm
#else
.macro loadsp, rb
addruart \rb
.macro loadsp, rb, tmp
addruart \rb, \tmp
.endm
#endif
#endif
@ -1025,7 +1025,7 @@ phex: adr r3, phexbuf
strb r2, [r3, r1]
b 1b
puts: loadsp r3
puts: loadsp r3, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@ -1042,7 +1042,7 @@ puts: loadsp r3
putc:
mov r2, r0
mov r0, #0
loadsp r3
loadsp r3, r1
b 2b
memdump: mov r12, r0

109
arch/arm/boot/compressed/misc.c
View File

@ -23,8 +23,8 @@ unsigned int __machine_arch_type;
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <asm/string.h>
#include <linux/linkage.h>
#include <asm/string.h>
#include <asm/unaligned.h>
@ -117,57 +117,7 @@ static void putstr(const char *ptr)
#endif
#define __ptr_t void *
#define memzero(s,n) __memzero(s,n)
/*
* Optimised C version of memzero for the ARM.
*/
void __memzero (__ptr_t s, size_t n)
{
union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
int i;
u.vp = s;
for (i = n >> 5; i > 0; i--) {
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
}
if (n & 1 << 4) {
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
*u.ulp++ = 0;
}
if (n & 1 << 3) {
*u.ulp++ = 0;
*u.ulp++ = 0;
}
if (n & 1 << 2)
*u.ulp++ = 0;
if (n & 1 << 1) {
*u.ucp++ = 0;
*u.ucp++ = 0;
}
if (n & 1)
*u.ucp++ = 0;
}
static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
size_t __n)
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i = 0;
unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
@ -204,59 +154,20 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
/*
* gzip delarations
*/
#define STATIC static
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
static void error(char *m);
extern char input_data[];
extern char input_data_end[];
static unsigned char *output_data;
static unsigned long output_ptr;
unsigned char *output_data;
unsigned long output_ptr;
static void error(char *m);
static void putstr(const char *);
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
#ifdef STANDALONE_DEBUG
#define NO_INFLATE_MALLOC
#endif
#define ARCH_HAS_DECOMP_WDOG
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"
#endif
#ifdef CONFIG_KERNEL_LZO
#include "../../../../lib/decompress_unlzo.c"
#endif
unsigned long free_mem_ptr;
unsigned long free_mem_end_ptr;
#ifndef arch_error
#define arch_error(x)
#endif
static void error(char *x)
void error(char *x)
{
arch_error(x);
@ -272,6 +183,8 @@ asmlinkage void __div0(void)
error("Attempting division by 0!");
}
extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
#ifndef STANDALONE_DEBUG
unsigned long
@ -292,8 +205,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
output_ptr = get_unaligned_le32(tmp);
putstr("Uncompressing Linux...");
decompress(input_data, input_data_end - input_data,
NULL, NULL, output_data, NULL, error);
do_decompress(input_data, input_data_end - input_data,
output_data, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}

8
arch/arm/boot/compressed/vmlinux.lds.in
View File

@ -14,6 +14,13 @@ SECTIONS
/DISCARD/ : {
*(.ARM.exidx*)
*(.ARM.extab*)
/*
* Discard any r/w data - this produces a link error if we have any,
* which is required for PIC decompression. Local data generates
* GOTOFF relocations, which prevents it being relocated independently
* of the text/got segments.
*/
*(.data)
}
. = TEXT_START;
@ -40,7 +47,6 @@ SECTIONS
.got : { *(.got) }
_got_end = .;
.got.plt : { *(.got.plt) }
.data : { *(.data) }
_edata = .;
. = BSS_START;

10
arch/arm/common/clkdev.c
View File

@ -99,6 +99,16 @@ void clkdev_add(struct clk_lookup *cl)
}
EXPORT_SYMBOL(clkdev_add);
void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
{
mutex_lock(&clocks_mutex);
while (num--) {
list_add_tail(&cl->node, &clocks);
cl++;
}
mutex_unlock(&clocks_mutex);
}
#define MAX_DEV_ID 20
#define MAX_CON_ID 16

4
arch/arm/common/dmabounce.c
View File

@ -277,7 +277,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
* We don't need to sync the DMA buffer since
* it was allocated via the coherent allocators.
*/
dma_cache_maint(ptr, size, dir);
__dma_single_cpu_to_dev(ptr, size, dir);
}
return dma_addr;
@ -315,6 +315,8 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
__cpuc_flush_dcache_area(ptr, size);
}
free_safe_buffer(dev->archdata.dmabounce, buf);
} else {
__dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
}
}

293
arch/arm/common/vic.c
View File

@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
static void vic_ack_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
}
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
@ -99,13 +58,34 @@ struct vic_device {
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
#endif /* CONFIG_PM */
static int vic_id;
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
@ -158,31 +138,6 @@ struct sysdev_class vic_class = {
.resume = vic_class_resume,
};
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
/**
* vic_pm_init - initicall to register VIC pm
*
@ -219,9 +174,60 @@ static int __init vic_pm_init(void)
return 0;
}
late_initcall(vic_pm_init);
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#endif /* CONFIG_PM */
static void vic_ack_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
}
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
@ -255,10 +261,7 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
return 0;
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#define vic_set_wake NULL
#endif /* CONFIG_PM */
@ -270,80 +273,6 @@ static struct irq_chip vic_chip = {
.set_wake = vic_set_wake,
};
/* The PL190 cell from ARM has been modified by ST, so handle both here */
static void vik_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources);
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
* @resume_sources: bitmask of interrupt sources to allow for resume
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
u32 cellid = 0;
enum amba_vendor vendor;
/* Identify which VIC cell this one is, by reading the ID */
for (i = 0; i < 4; i++) {
u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
cellid |= (readl(addr) & 0xff) << (8 * i);
}
vendor = (cellid >> 12) & 0xff;
printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
base, cellid, vendor);
switch(vendor) {
case AMBA_VENDOR_ST:
vik_init_st(base, irq_start, vic_sources);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
/* fall through */
case AMBA_VENDOR_ARM:
break;
}
/* Disable all interrupts initially. */
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts
*/
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
vic_pm_register(base, irq_start, resume_sources);
}
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
@ -351,7 +280,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
@ -400,3 +329,73 @@ static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
}
}
}
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
* @resume_sources: bitmask of interrupt sources to allow for resume
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
u32 cellid = 0;
enum amba_vendor vendor;
/* Identify which VIC cell this one is, by reading the ID */
for (i = 0; i < 4; i++) {
u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
cellid |= (readl(addr) & 0xff) << (8 * i);
}
vendor = (cellid >> 12) & 0xff;
printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
base, cellid, vendor);
switch(vendor) {
case AMBA_VENDOR_ST:
vic_init_st(base, irq_start, vic_sources);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
/* fall through */
case AMBA_VENDOR_ARM:
break;
}
/* Disable all interrupts initially. */
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts
*/
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
vic_pm_register(base, irq_start, resume_sources);
}

1640
arch/arm/configs/at572d940hfek_defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

3
arch/arm/configs/omap_4430sdp_defconfig
View File

@ -242,10 +242,13 @@ CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_GIC=y
#

228
arch/arm/include/asm/atomic.h
View File

@ -235,6 +235,234 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
#define smp_mb__before_atomic_inc() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
#ifndef CONFIG_GENERIC_ATOMIC64
typedef struct {
u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(i) { (i) }
static inline u64 atomic64_read(atomic64_t *v)
{
u64 result;
__asm__ __volatile__("@ atomic64_read\n"
" ldrexd %0, %H0, [%1]"
: "=&r" (result)
: "r" (&v->counter)
);
return result;
}
static inline void atomic64_set(atomic64_t *v, u64 i)
{
u64 tmp;
__asm__ __volatile__("@ atomic64_set\n"
"1: ldrexd %0, %H0, [%1]\n"
" strexd %0, %2, %H2, [%1]\n"
" teq %0, #0\n"
" bne 1b"
: "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
}
static inline void atomic64_add(u64 i, atomic64_t *v)
{
u64 result;
unsigned long tmp;
__asm__ __volatile__("@ atomic64_add\n"
"1: ldrexd %0, %H0, [%2]\n"
" adds %0, %0, %3\n"
" adc %H0, %H0, %H3\n"
" strexd %1, %0, %H0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
}
static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
{
u64 result;
unsigned long tmp;
smp_mb();
__asm__ __volatile__("@ atomic64_add_return\n"
"1: ldrexd %0, %H0, [%2]\n"
" adds %0, %0, %3\n"
" adc %H0, %H0, %H3\n"
" strexd %1, %0, %H0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
smp_mb();
return result;
}
static inline void atomic64_sub(u64 i, atomic64_t *v)
{
u64 result;
unsigned long tmp;
__asm__ __volatile__("@ atomic64_sub\n"
"1: ldrexd %0, %H0, [%2]\n"
" subs %0, %0, %3\n"
" sbc %H0, %H0, %H3\n"
" strexd %1, %0, %H0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
}
static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
{
u64 result;
unsigned long tmp;
smp_mb();
__asm__ __volatile__("@ atomic64_sub_return\n"
"1: ldrexd %0, %H0, [%2]\n"
" subs %0, %0, %3\n"
" sbc %H0, %H0, %H3\n"
" strexd %1, %0, %H0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
smp_mb();
return result;
}
static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
{
u64 oldval;
unsigned long res;
smp_mb();
do {
__asm__ __volatile__("@ atomic64_cmpxchg\n"
"ldrexd %1, %H1, [%2]\n"
"mov %0, #0\n"
"teq %1, %3\n"
"teqeq %H1, %H3\n"
"strexdeq %0, %4, %H4, [%2]"
: "=&r" (res), "=&r" (oldval)
: "r" (&ptr->counter), "r" (old), "r" (new)
: "cc");
} while (res);
smp_mb();
return oldval;
}
static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
{
u64 result;
unsigned long tmp;
smp_mb();
__asm__ __volatile__("@ atomic64_xchg\n"
"1: ldrexd %0, %H0, [%2]\n"
" strexd %1, %3, %H3, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&ptr->counter), "r" (new)
: "cc");
smp_mb();
return result;
}
static inline u64 atomic64_dec_if_positive(atomic64_t *v)
{
u64 result;
unsigned long tmp;
smp_mb();
__asm__ __volatile__("@ atomic64_dec_if_positive\n"
"1: ldrexd %0, %H0, [%2]\n"
" subs %0, %0, #1\n"
" sbc %H0, %H0, #0\n"
" teq %H0, #0\n"
" bmi 2f\n"
" strexd %1, %0, %H0, [%2]\n"
" teq %1, #0\n"
" bne 1b\n"
"2:"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter)
: "cc");
smp_mb();
return result;
}
static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
{
u64 val;
unsigned long tmp;
int ret = 1;
smp_mb();
__asm__ __volatile__("@ atomic64_add_unless\n"
"1: ldrexd %0, %H0, [%3]\n"
" teq %0, %4\n"
" teqeq %H0, %H4\n"
" moveq %1, #0\n"
" beq 2f\n"
" adds %0, %0, %5\n"
" adc %H0, %H0, %H5\n"
" strexd %2, %0, %H0, [%3]\n"
" teq %2, #0\n"
" bne 1b\n"
"2:"
: "=&r" (val), "=&r" (ret), "=&r" (tmp)
: "r" (&v->counter), "r" (u), "r" (a)
: "cc");
if (ret)
smp_mb();
return ret;
}
#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
#define atomic64_inc(v) atomic64_add(1LL, (v))
#define atomic64_inc_return(v) atomic64_add_return(1LL, (v))
#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0)
#define atomic64_dec(v) atomic64_sub(1LL, (v))
#define atomic64_dec_return(v) atomic64_sub_return(1LL, (v))
#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL)
#else /* !CONFIG_GENERIC_ATOMIC64 */
#include <asm-generic/atomic64.h>
#endif
#include <asm-generic/atomic-long.h>
#endif
#endif

56
arch/arm/include/asm/cacheflush.h
View File

@ -197,21 +197,6 @@
* DMA Cache Coherency
* ===================
*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
* - start - virtual start address
* - end - virtual end address
*
* dma_clean_range(start, end)
*
* Clean (write back) the specified virtual address range.
* - start - virtual start address
* - end - virtual end address
*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@ -228,8 +213,9 @@ struct cpu_cache_fns {
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_area)(void *, size_t);
void (*dma_inv_range)(const void *, const void *);
void (*dma_clean_range)(const void *, const void *);
void (*dma_map_area)(const void *, size_t, int);
void (*dma_unmap_area)(const void *, size_t, int);
void (*dma_flush_range)(const void *, const void *);
};
@ -259,8 +245,8 @@ extern struct cpu_cache_fns cpu_cache;
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
#define dmac_inv_range cpu_cache.dma_inv_range
#define dmac_clean_range cpu_cache.dma_clean_range
#define dmac_map_area cpu_cache.dma_map_area
#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
@ -285,12 +271,12 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
#define dmac_map_area __glue(_CACHE,_dma_map_area)
#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
extern void dmac_inv_range(const void *, const void *);
extern void dmac_clean_range(const void *, const void *);
extern void dmac_map_area(const void *, size_t, int);
extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
#endif
@ -331,12 +317,8 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
* processes address space. Really, we want to allow our "user
* space" model to handle this.
*/
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
} while (0)
extern void copy_to_user_page(struct vm_area_struct *, struct page *,
unsigned long, void *, const void *, unsigned long);
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
@ -370,17 +352,6 @@ vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
}
}
static inline void
vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *kaddr,
unsigned long len, int write)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = (unsigned long)kaddr;
__cpuc_coherent_kern_range(addr, addr + len);
}
}
#ifndef CONFIG_CPU_CACHE_VIPT
#define flush_cache_mm(mm) \
vivt_flush_cache_mm(mm)
@ -388,15 +359,10 @@ vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
vivt_flush_cache_range(vma,start,end)
#define flush_cache_page(vma,addr,pfn) \
vivt_flush_cache_page(vma,addr,pfn)
#define flush_ptrace_access(vma,page,ua,ka,len,write) \
vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *kaddr,
unsigned long len, int write);
#endif
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)

3
arch/arm/include/asm/clkdev.h
View File

@ -27,4 +27,7 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
void clkdev_add(struct clk_lookup *cl);
void clkdev_drop(struct clk_lookup *cl);
void clkdev_add_table(struct clk_lookup *, size_t);
int clk_add_alias(const char *, const char *, char *, struct device *);
#endif

79
arch/arm/include/asm/dma-mapping.h
View File

@ -57,18 +57,58 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
#endif
/*
* DMA-consistent mapping functions. These allocate/free a region of
* uncached, unwrite-buffered mapped memory space for use with DMA
* devices. This is the "generic" version. The PCI specific version
* is in pci.h
* The DMA API is built upon the notion of "buffer ownership". A buffer
* is either exclusively owned by the CPU (and therefore may be accessed
* by it) or exclusively owned by the DMA device. These helper functions
* represent the transitions between these two ownership states.
*
* Note: Drivers should NOT use this function directly, as it will break
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
* Note, however, that on later ARMs, this notion does not work due to
* speculative prefetches. We model our approach on the assumption that
* the CPU does do speculative prefetches, which means we clean caches
* before transfers and delay cache invalidation until transfer completion.
*
* Private support functions: these are not part of the API and are
* liable to change. Drivers must not use these.
*/
extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
extern void dma_cache_maint_page(struct page *page, unsigned long offset,
size_t size, int rw);
static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
enum dma_data_direction dir)
{
extern void ___dma_single_cpu_to_dev(const void *, size_t,
enum dma_data_direction);
if (!arch_is_coherent())
___dma_single_cpu_to_dev(kaddr, size, dir);
}
static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
enum dma_data_direction dir)
{
extern void ___dma_single_dev_to_cpu(const void *, size_t,
enum dma_data_direction);
if (!arch_is_coherent())
___dma_single_dev_to_cpu(kaddr, size, dir);
}
static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
size_t size, enum dma_data_direction dir)
{
extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
size_t, enum dma_data_direction);
if (!arch_is_coherent())
___dma_page_cpu_to_dev(page, off, size, dir);
}
static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
size_t size, enum dma_data_direction dir)
{
extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
size_t, enum dma_data_direction);
if (!arch_is_coherent())
___dma_page_dev_to_cpu(page, off, size, dir);
}
/*
* Return whether the given device DMA address mask can be supported
@ -304,8 +344,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
{
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
__dma_single_cpu_to_dev(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
@ -329,8 +368,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
{
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
dma_cache_maint_page(page, offset, size, dir);
__dma_page_cpu_to_dev(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
@ -352,7 +390,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
/* nothing to do */
__dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
}
/**
@ -372,7 +410,8 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
/* nothing to do */
__dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
size, dir);
}
#endif /* CONFIG_DMABOUNCE */
@ -400,7 +439,10 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
{
BUG_ON(!valid_dma_direction(dir));
dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
return;
__dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@ -412,8 +454,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
if (!arch_is_coherent())
dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
__dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,

11
arch/arm/include/asm/io.h
View File

@ -69,9 +69,16 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
/*
* __arm_ioremap takes CPU physical address.
* __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
* The _caller variety takes a __builtin_return_address(0) value for
* /proc/vmalloc to use - and should only be used in non-inline functions.
*/
extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
size_t, unsigned int, void *);
extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
void *);
extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
extern void __iounmap(volatile void __iomem *addr);
/*

8
arch/arm/include/asm/mach/time.h
View File

@ -46,12 +46,4 @@ struct sys_timer {
extern struct sys_timer *system_timer;
extern void timer_tick(void);
/*
* Kernel time keeping support.
*/
struct timespec;
extern int (*set_rtc)(void);
extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
#endif

23
arch/arm/include/asm/memory.h
View File

@ -76,6 +76,17 @@
*/
#define IOREMAP_MAX_ORDER 24
/*
* Size of DMA-consistent memory region. Must be multiple of 2M,
* between 2MB and 14MB inclusive.
*/
#ifndef CONSISTENT_DMA_SIZE
#define CONSISTENT_DMA_SIZE SZ_2M
#endif
#define CONSISTENT_END (0xffe00000UL)
#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
#else /* CONFIG_MMU */
/*
@ -93,11 +104,11 @@
#endif
#ifndef PHYS_OFFSET
#define PHYS_OFFSET (CONFIG_DRAM_BASE)
#define PHYS_OFFSET UL(CONFIG_DRAM_BASE)
#endif
#ifndef END_MEM
#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
@ -112,14 +123,6 @@
#endif /* !CONFIG_MMU */
/*
* Size of DMA-consistent memory region. Must be multiple of 2M,
* between 2MB and 14MB inclusive.
*/
#ifndef CONSISTENT_DMA_SIZE
#define CONSISTENT_DMA_SIZE SZ_2M
#endif
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h

1
arch/arm/include/asm/mmu.h
View File

@ -6,6 +6,7 @@
typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
unsigned int id;
spinlock_t id_lock;
#endif
unsigned int kvm_seq;
} mm_context_t;

15
arch/arm/include/asm/mmu_context.h
View File

@ -43,12 +43,23 @@ void __check_kvm_seq(struct mm_struct *mm);
#define ASID_FIRST_VERSION (1 << ASID_BITS)
extern unsigned int cpu_last_asid;
#ifdef CONFIG_SMP
DECLARE_PER_CPU(struct mm_struct *, current_mm);
#endif
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
void __new_context(struct mm_struct *mm);
static inline void check_context(struct mm_struct *mm)
{
/*
* This code is executed with interrupts enabled. Therefore,
* mm->context.id cannot be updated to the latest ASID version
* on a different CPU (and condition below not triggered)
* without first getting an IPI to reset the context. The
* alternative is to take a read_lock on mm->context.id_lock
* (after changing its type to rwlock_t).
*/
if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
__new_context(mm);
@ -108,6 +119,10 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
__flush_icache_all();
#endif
if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
#ifdef CONFIG_SMP
struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
*crt_mm = next;
#endif
check_context(next);
cpu_switch_mm(next->pgd, next);
if (cache_is_vivt())

7
arch/arm/include/asm/page.h
View File

@ -117,11 +117,12 @@
#endif
struct page;
struct vm_area_struct;
struct cpu_user_fns {
void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
unsigned long vaddr);
unsigned long vaddr, struct vm_area_struct *vma);
};
#ifdef MULTI_USER
@ -137,7 +138,7 @@ extern struct cpu_user_fns cpu_user;
extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
unsigned long vaddr);
unsigned long vaddr, struct vm_area_struct *vma);
#endif
#define clear_user_highpage(page,vaddr) \
@ -145,7 +146,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
#define __HAVE_ARCH_COPY_USER_HIGHPAGE
#define copy_user_highpage(to,from,vaddr,vma) \
__cpu_copy_user_highpage(to, from, vaddr)
__cpu_copy_user_highpage(to, from, vaddr, vma)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);

31
arch/arm/include/asm/perf_event.h Normal file
View File

@ -0,0 +1,31 @@
/*
* linux/arch/arm/include/asm/perf_event.h
*
* Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
/*
* NOP: on *most* (read: all supported) ARM platforms, the performance
* counter interrupts are regular interrupts and not an NMI. This
* means that when we receive the interrupt we can call
* perf_event_do_pending() that handles all of the work with
* interrupts enabled.
*/
static inline void
set_perf_event_pending(void)
{
}
/* ARM performance counters start from 1 (in the cp15 accesses) so use the
* same indexes here for consistency. */
#define PERF_EVENT_INDEX_OFFSET 1
#endif /* __ARM_PERF_EVENT_H__ */

4
arch/arm/include/asm/pgtable-nommu.h
View File

@ -86,8 +86,8 @@ extern unsigned int kobjsize(const void *objp);
* All 32bit addresses are effectively valid for vmalloc...
* Sort of meaningless for non-VM targets.
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
#define VMALLOC_START 0UL
#define VMALLOC_END 0xffffffffUL
#define FIRST_USER_ADDRESS (0)

75
arch/arm/include/asm/pmu.h Normal file
View File

@ -0,0 +1,75 @@
/*
* linux/arch/arm/include/asm/pmu.h
*
* Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ARM_PMU_H__
#define __ARM_PMU_H__
#ifdef CONFIG_CPU_HAS_PMU
struct pmu_irqs {
const int *irqs;
int num_irqs;
};
/**
* reserve_pmu() - reserve the hardware performance counters
*
* Reserve the hardware performance counters in the system for exclusive use.
* The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
* encoded error on failure.
*/
extern const struct pmu_irqs *
reserve_pmu(void);
/**
* release_pmu() - Relinquish control of the performance counters
*
* Release the performance counters and allow someone else to use them.
* Callers must have disabled the counters and released IRQs before calling
* this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
* a cookie.
*/
extern int
release_pmu(const struct pmu_irqs *irqs);
/**
* init_pmu() - Initialise the PMU.
*
* Initialise the system ready for PMU enabling. This should typically set the
* IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
* the actual hardware initialisation.
*/
extern int
init_pmu(void);
#else /* CONFIG_CPU_HAS_PMU */
static inline const struct pmu_irqs *
reserve_pmu(void)
{
return ERR_PTR(-ENODEV);
}
static inline int
release_pmu(const struct pmu_irqs *irqs)
{
return -ENODEV;
}
static inline int
init_pmu(void)
{
return -ENODEV;
}
#endif /* CONFIG_CPU_HAS_PMU */
#endif /* __ARM_PMU_H__ */

12
arch/arm/include/asm/setup.h
View File

@ -223,18 +223,6 @@ extern struct meminfo meminfo;
#define bank_phys_end(bank) ((bank)->start + (bank)->size)
#define bank_phys_size(bank) (bank)->size
/*
* Early command line parameters.
*/
struct early_params {
const char *arg;
void (*fn)(char **p);
};
#define __early_param(name,fn) \
static struct early_params __early_##fn __used \
__attribute__((__section__(".early_param.init"))) = { name, fn }
#endif /* __KERNEL__ */
#endif

5
arch/arm/include/asm/smp_plat.h
View File

@ -13,4 +13,9 @@ static inline int tlb_ops_need_broadcast(void)
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
static inline int cache_ops_need_broadcast(void)
{
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
}
#endif

36
arch/arm/include/asm/spinlock.h
View File

@ -5,6 +5,22 @@
#error SMP not supported on pre-ARMv6 CPUs
#endif
static inline void dsb_sev(void)
{
#if __LINUX_ARM_ARCH__ >= 7
__asm__ __volatile__ (
"dsb\n"
"sev"
);
#elif defined(CONFIG_CPU_32v6K)
__asm__ __volatile__ (
"mcr p15, 0, %0, c7, c10, 4\n"
"sev"
: : "r" (0)
);
#endif
}
/*
* ARMv6 Spin-locking.
*
@ -69,13 +85,11 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
__asm__ __volatile__(
" str %1, [%0]\n"
#ifdef CONFIG_CPU_32v6K
" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
" sev"
#endif
:
: "r" (&lock->lock), "r" (0)
: "cc");
dsb_sev();
}
/*
@ -132,13 +146,11 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
__asm__ __volatile__(
"str %1, [%0]\n"
#ifdef CONFIG_CPU_32v6K
" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
" sev\n"
#endif
:
: "r" (&rw->lock), "r" (0)
: "cc");
dsb_sev();
}
/* write_can_lock - would write_trylock() succeed? */
@ -188,14 +200,12 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
#ifdef CONFIG_CPU_32v6K
"\n cmp %0, #0\n"
" mcreq p15, 0, %0, c7, c10, 4\n"
" seveq"
#endif
: "=&r" (tmp), "=&r" (tmp2)
: "r" (&rw->lock)
: "cc");
if (tmp == 0)
dsb_sev();
}
static inline int arch_read_trylock(arch_rwlock_t *rw)

3
arch/arm/include/asm/system.h
View File

@ -73,8 +73,7 @@ extern unsigned int mem_fclk_21285;
struct pt_regs;
void die(const char *msg, struct pt_regs *regs, int err)
__attribute__((noreturn));
void die(const char *msg, struct pt_regs *regs, int err);
struct siginfo;
void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,

3
arch/arm/include/asm/thread_info.h
View File

@ -115,7 +115,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
extern void iwmmxt_task_release(struct thread_info *);
extern void iwmmxt_task_switch(struct thread_info *);
extern void vfp_sync_state(struct thread_info *thread);
extern void vfp_sync_hwstate(struct thread_info *);
extern void vfp_flush_hwstate(struct thread_info *);
#endif

3
arch/arm/include/asm/tlbflush.h
View File

@ -529,7 +529,8 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
* cache entries for the kernels virtual memory range are written
* back to the page.
*/
extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
pte_t *ptep);
#endif

3
arch/arm/kernel/Makefile
View File

@ -17,6 +17,7 @@ obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
@ -46,6 +47,8 @@ obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)

5
arch/arm/kernel/asm-offsets.c
View File

@ -12,6 +12,7 @@
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@ -112,5 +113,9 @@ int main(void)
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
return 0;
}

12
arch/arm/kernel/debug.S
View File

@ -24,7 +24,7 @@
#if defined(CONFIG_CPU_V6)
.macro addruart, rx
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@ -51,7 +51,7 @@
#elif defined(CONFIG_CPU_V7)
.macro addruart, rx
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@ -71,7 +71,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
#elif defined(CONFIG_CPU_XSCALE)
.macro addruart, rx
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@ -98,7 +98,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
#else
.macro addruart, rx
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@ -164,7 +164,7 @@ ENDPROC(printhex2)
.ltorg
ENTRY(printascii)
addruart r3
addruart r3, r1
b 2f
1: waituart r2, r3
senduart r1, r3
@ -180,7 +180,7 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
addruart r3
addruart r3, r1
mov r1, r0
mov r0, #0
b 1b

115
arch/arm/kernel/leds.c Normal file
View File

@ -0,0 +1,115 @@
/*
* LED support code, ripped out of arch/arm/kernel/time.c
*
* Copyright (C) 1994-2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <asm/leds.h>
static void dummy_leds_event(led_event_t evt)
{
}
void (*leds_event)(led_event_t) = dummy_leds_event;
struct leds_evt_name {
const char name[8];
int on;
int off;
};
static const struct leds_evt_name evt_names[] = {
{ "amber", led_amber_on, led_amber_off },
{ "blue", led_blue_on, led_blue_off },
{ "green", led_green_on, led_green_off },
{ "red", led_red_on, led_red_off },
};
static ssize_t leds_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t size)
{
int ret = -EINVAL, len = strcspn(buf, " ");
if (len > 0 && buf[len] == '\0')
len--;
if (strncmp(buf, "claim", len) == 0) {
leds_event(led_claim);
ret = size;
} else if (strncmp(buf, "release", len) == 0) {
leds_event(led_release);
ret = size;
} else {
int i;
for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
if (strlen(evt_names[i].name) != len ||
strncmp(buf, evt_names[i].name, len) != 0)
continue;
if (strncmp(buf+len, " on", 3) == 0) {
leds_event(evt_names[i].on);
ret = size;
} else if (strncmp(buf+len, " off", 4) == 0) {
leds_event(evt_names[i].off);
ret = size;
}
break;
}
}
return ret;
}
static SYSDEV_ATTR(event, 0200, NULL, leds_store);
static int leds_suspend(struct sys_device *dev, pm_message_t state)
{
leds_event(led_stop);
return 0;
}
static int leds_resume(struct sys_device *dev)
{
leds_event(led_start);
return 0;
}
static int leds_shutdown(struct sys_device *dev)
{
leds_event(led_halted);
return 0;
}
static struct sysdev_class leds_sysclass = {
.name = "leds",
.shutdown = leds_shutdown,
.suspend = leds_suspend,
.resume = leds_resume,
};
static struct sys_device leds_device = {
.id = 0,
.cls = &leds_sysclass,
};
static int __init leds_init(void)
{
int ret;
ret = sysdev_class_register(&leds_sysclass);
if (ret == 0)
ret = sysdev_register(&leds_device);
if (ret == 0)
ret = sysdev_create_file(&leds_device, &attr_event);
return ret;
}
device_initcall(leds_init);
EXPORT_SYMBOL(leds_event);

2276
arch/arm/kernel/perf_event.c Normal file
View File

File diff suppressed because it is too large Load Diff

103
arch/arm/kernel/pmu.c Normal file
View File

@ -0,0 +1,103 @@
/*
* linux/arch/arm/kernel/pmu.c
*
* Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/pmu.h>
/*
* Define the IRQs for the system. We could use something like a platform
* device but that seems fairly heavyweight for this. Also, the performance
* counters can't be removed or hotplugged.
*
* Ordering is important: init_pmu() will use the ordering to set the affinity
* to the corresponding core. e.g. the first interrupt will go to cpu 0, the
* second goes to cpu 1 etc.
*/
static const int irqs[] = {
#if defined(CONFIG_ARCH_OMAP2)
3,
#elif defined(CONFIG_ARCH_BCMRING)
IRQ_PMUIRQ,
#elif defined(CONFIG_MACH_REALVIEW_EB)
IRQ_EB11MP_PMU_CPU0,
IRQ_EB11MP_PMU_CPU1,
IRQ_EB11MP_PMU_CPU2,
IRQ_EB11MP_PMU_CPU3,
#elif defined(CONFIG_ARCH_OMAP3)
INT_34XX_BENCH_MPU_EMUL,
#elif defined(CONFIG_ARCH_IOP32X)
IRQ_IOP32X_CORE_PMU,
#elif defined(CONFIG_ARCH_IOP33X)
IRQ_IOP33X_CORE_PMU,
#elif defined(CONFIG_ARCH_PXA)
IRQ_PMU,
#endif
};
static const struct pmu_irqs pmu_irqs = {
.irqs = irqs,
.num_irqs = ARRAY_SIZE(irqs),
};
static volatile long pmu_lock;
const struct pmu_irqs *
reserve_pmu(void)
{
return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) :
&pmu_irqs;
}
EXPORT_SYMBOL_GPL(reserve_pmu);
int
release_pmu(const struct pmu_irqs *irqs)
{
if (WARN_ON(irqs != &pmu_irqs))
return -EINVAL;
clear_bit_unlock(0, &pmu_lock);
return 0;
}
EXPORT_SYMBOL_GPL(release_pmu);
static int
set_irq_affinity(int irq,
unsigned int cpu)
{
#ifdef CONFIG_SMP
int err = irq_set_affinity(irq, cpumask_of(cpu));
if (err)
pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, cpu);
return err;
#else
return 0;
#endif
}
int
init_pmu(void)
{
int i, err = 0;
for (i = 0; i < pmu_irqs.num_irqs; ++i) {
err = set_irq_affinity(pmu_irqs.irqs[i], i);
if (err)
break;
}
return err;
}
EXPORT_SYMBOL_GPL(init_pmu);

53
arch/arm/kernel/ptrace.c
View File

@ -499,10 +499,41 @@ static struct undef_hook thumb_break_hook = {
.fn = break_trap,
};
static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr)
{
unsigned int instr2;
void __user *pc;
/* Check the second half of the instruction. */
pc = (void __user *)(instruction_pointer(regs) + 2);
if (processor_mode(regs) == SVC_MODE) {
instr2 = *(u16 *) pc;
} else {
get_user(instr2, (u16 __user *)pc);
}
if (instr2 == 0xa000) {
ptrace_break(current, regs);
return 0;
} else {
return 1;
}
}
static struct undef_hook thumb2_break_hook = {
.instr_mask = 0xffff,
.instr_val = 0xf7f0,
.cpsr_mask = PSR_T_BIT,
.cpsr_val = PSR_T_BIT,
.fn = thumb2_break_trap,
};
static int __init ptrace_break_init(void)
{
register_undef_hook(&arm_break_hook);
register_undef_hook(&thumb_break_hook);
register_undef_hook(&thumb2_break_hook);
return 0;
}
@ -669,7 +700,7 @@ static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
union vfp_state *vfp = &thread->vfpstate;
struct user_vfp __user *ufp = data;
vfp_sync_state(thread);
vfp_sync_hwstate(thread);
/* copy the floating point registers */
if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
@ -692,7 +723,7 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
union vfp_state *vfp = &thread->vfpstate;
struct user_vfp __user *ufp = data;
vfp_sync_state(thread);
vfp_sync_hwstate(thread);
/* copy the floating point registers */
if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
@ -703,6 +734,8 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
if (get_user(vfp->hard.fpscr, &ufp->fpscr))
return -EFAULT;
vfp_flush_hwstate(thread);
return 0;
}
#endif
@ -712,26 +745,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
int ret;
switch (request) {
/*
* read word at location "addr" in the child process.
*/
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
ret = generic_ptrace_peekdata(child, addr, data);
break;
case PTRACE_PEEKUSR:
ret = ptrace_read_user(child, addr, (unsigned long __user *)data);
break;
/*
* write the word at location addr.
*/
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
ret = generic_ptrace_pokedata(child, addr, data);
break;
case PTRACE_POKEUSR:
ret = ptrace_write_user(child, addr, data);
break;

81
arch/arm/kernel/setup.c
View File

@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <asm/unified.h>
#include <asm/cpu.h>
@ -118,7 +119,7 @@ EXPORT_SYMBOL(elf_platform);
static const char *cpu_name;
static const char *machine_name;
static char __initdata command_line[COMMAND_LINE_SIZE];
static char __initdata cmd_line[COMMAND_LINE_SIZE];
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
@ -418,10 +419,11 @@ static int __init arm_add_memory(unsigned long start, unsigned long size)
* Pick out the memory size. We look for mem=size@start,
* where start and size are "size[KkMm]"
*/
static void __init early_mem(char **p)
static int __init early_mem(char *p)
{
static int usermem __initdata = 0;
unsigned long size, start;
char *endp;
/*
* If the user specifies memory size, we
@ -434,52 +436,15 @@ static void __init early_mem(char **p)
}
start = PHYS_OFFSET;
size = memparse(*p, p);
if (**p == '@')
start = memparse(*p + 1, p);
size = memparse(p, &endp);
if (*endp == '@')
start = memparse(endp + 1, NULL);
arm_add_memory(start, size);
return 0;
}
__early_param("mem=", early_mem);
/*
* Initial parsing of the command line.
*/
static void __init parse_cmdline(char **cmdline_p, char *from)
{
char c = ' ', *to = command_line;
int len = 0;
for (;;) {
if (c == ' ') {
extern struct early_params __early_begin, __early_end;
struct early_params *p;
for (p = &__early_begin; p < &__early_end; p++) {
int arglen = strlen(p->arg);
if (memcmp(from, p->arg, arglen) == 0) {
if (to != command_line)
to -= 1;
from += arglen;
p->fn(&from);
while (*from != ' ' && *from != '\0')
from++;
break;
}
}
}
c = *from++;
if (!c)
break;
if (COMMAND_LINE_SIZE <= ++len)
break;
*to++ = c;
}
*to = '\0';
*cmdline_p = command_line;
}
early_param("mem", early_mem);
static void __init
setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
@ -740,9 +705,15 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
parse_cmdline(cmdline_p, from);
/* parse_early_param needs a boot_command_line */
strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
/* populate cmd_line too for later use, preserving boot_command_line */
strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
parse_early_param();
paging_init(mdesc);
request_standard_resources(&meminfo, mdesc);
@ -783,9 +754,21 @@ static int __init topology_init(void)
return 0;
}
subsys_initcall(topology_init);
#ifdef CONFIG_HAVE_PROC_CPU
static int __init proc_cpu_init(void)
{
struct proc_dir_entry *res;
res = proc_mkdir("cpu", NULL);
if (!res)
return -ENOMEM;
return 0;
}
fs_initcall(proc_cpu_init);
#endif
static const char *hwcap_str[] = {
"swp",
"half",

178
arch/arm/kernel/time.c
View File

@ -10,11 +10,6 @@
*
* This file contains the ARM-specific time handling details:
* reading the RTC at bootup, etc...
*
* 1994-07-02 Alan Modra
* fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
* 1998-12-20 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/module.h>
#include <linux/kernel.h>
@ -77,11 +72,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
/*
* hook for setting the RTC's idea of the current time.
*/
int (*set_rtc)(void);
#ifndef CONFIG_GENERIC_TIME
static unsigned long dummy_gettimeoffset(void)
{
@ -89,140 +79,6 @@ static unsigned long dummy_gettimeoffset(void)
}
#endif
static unsigned long next_rtc_update;
/*
* If we have an externally synchronized linux clock, then update
* CMOS clock accordingly every ~11 minutes. set_rtc() has to be
* called as close as possible to 500 ms before the new second
* starts.
*/
static inline void do_set_rtc(void)
{
if (!ntp_synced() || set_rtc == NULL)
return;
if (next_rtc_update &&
time_before((unsigned long)xtime.tv_sec, next_rtc_update))
return;
if (xtime.tv_nsec < 500000000 - ((unsigned) tick_nsec >> 1) &&
xtime.tv_nsec >= 500000000 + ((unsigned) tick_nsec >> 1))
return;
if (set_rtc())
/*
* rtc update failed. Try again in 60s
*/
next_rtc_update = xtime.tv_sec + 60;
else
next_rtc_update = xtime.tv_sec + 660;
}
#ifdef CONFIG_LEDS
static void dummy_leds_event(led_event_t evt)
{
}
void (*leds_event)(led_event_t) = dummy_leds_event;
struct leds_evt_name {
const char name[8];
int on;
int off;
};
static const struct leds_evt_name evt_names[] = {
{ "amber", led_amber_on, led_amber_off },
{ "blue", led_blue_on, led_blue_off },
{ "green", led_green_on, led_green_off },
{ "red", led_red_on, led_red_off },
};
static ssize_t leds_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t size)
{
int ret = -EINVAL, len = strcspn(buf, " ");
if (len > 0 && buf[len] == '\0')
len--;
if (strncmp(buf, "claim", len) == 0) {
leds_event(led_claim);
ret = size;
} else if (strncmp(buf, "release", len) == 0) {
leds_event(led_release);
ret = size;
} else {
int i;
for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
if (strlen(evt_names[i].name) != len ||
strncmp(buf, evt_names[i].name, len) != 0)
continue;
if (strncmp(buf+len, " on", 3) == 0) {
leds_event(evt_names[i].on);
ret = size;
} else if (strncmp(buf+len, " off", 4) == 0) {
leds_event(evt_names[i].off);
ret = size;
}
break;
}
}
return ret;
}
static SYSDEV_ATTR(event, 0200, NULL, leds_store);
static int leds_suspend(struct sys_device *dev, pm_message_t state)
{
leds_event(led_stop);
return 0;
}
static int leds_resume(struct sys_device *dev)
{
leds_event(led_start);
return 0;
}
static int leds_shutdown(struct sys_device *dev)
{
leds_event(led_halted);
return 0;
}
static struct sysdev_class leds_sysclass = {
.name = "leds",
.shutdown = leds_shutdown,
.suspend = leds_suspend,
.resume = leds_resume,
};
static struct sys_device leds_device = {
.id = 0,
.cls = &leds_sysclass,
};
static int __init leds_init(void)
{
int ret;
ret = sysdev_class_register(&leds_sysclass);
if (ret == 0)
ret = sysdev_register(&leds_device);
if (ret == 0)
ret = sysdev_create_file(&leds_device, &attr_event);
return ret;
}
device_initcall(leds_init);
EXPORT_SYMBOL(leds_event);
#endif
#ifdef CONFIG_LEDS_TIMER
static inline void do_leds(void)
{
@ -295,39 +151,6 @@ int do_settimeofday(struct timespec *tv)
EXPORT_SYMBOL(do_settimeofday);
#endif /* !CONFIG_GENERIC_TIME */
/**
* save_time_delta - Save the offset between system time and RTC time
* @delta: pointer to timespec to store delta
* @rtc: pointer to timespec for current RTC time
*
* Return a delta between the system time and the RTC time, such
* that system time can be restored later with restore_time_delta()
*/
void save_time_delta(struct timespec *delta, struct timespec *rtc)
{
set_normalized_timespec(delta,
xtime.tv_sec - rtc->tv_sec,
xtime.tv_nsec - rtc->tv_nsec);
}
EXPORT_SYMBOL(save_time_delta);
/**
* restore_time_delta - Restore the current system time
* @delta: delta returned by save_time_delta()
* @rtc: pointer to timespec for current RTC time
*/
void restore_time_delta(struct timespec *delta, struct timespec *rtc)
{
struct timespec ts;
set_normalized_timespec(&ts,
delta->tv_sec + rtc->tv_sec,
delta->tv_nsec + rtc->tv_nsec);
do_settimeofday(&ts);
}
EXPORT_SYMBOL(restore_time_delta);
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@ -336,7 +159,6 @@ void timer_tick(void)
{
profile_tick(CPU_PROFILING);
do_leds();
do_set_rtc();
write_seqlock(&xtime_lock);
do_timer(1);
write_sequnlock(&xtime_lock);

37
arch/arm/kernel/traps.c
View File

@ -12,15 +12,17 @@
* 'linux/arch/arm/lib/traps.S'. Mostly a debugging aid, but will probably
* kill the offending process.
*/
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/spinlock.h>
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@ -224,14 +226,21 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
#define S_SMP ""
#endif
static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
{
struct task_struct *tsk = thread->task;
static int die_counter;
int ret;
printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
sysfs_printk_last_file();
/* trap and error numbers are mostly meaningless on ARM */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
if (ret == NOTIFY_STOP)
return ret;
print_modules();
__show_regs(regs);
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
@ -243,6 +252,8 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
dump_backtrace(regs, tsk);
dump_instr(KERN_EMERG, regs);
}
return ret;
}
DEFINE_SPINLOCK(die_lock);
@ -250,16 +261,21 @@ DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
*/
NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
void die(const char *str, struct pt_regs *regs, int err)
{
struct thread_info *thread = current_thread_info();
int ret;
oops_enter();
spin_lock_irq(&die_lock);
console_verbose();
bust_spinlocks(1);
__die(str, err, thread, regs);
ret = __die(str, err, thread, regs);
if (regs && kexec_should_crash(thread->task))
crash_kexec(regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
@ -267,11 +283,10 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
do_exit(SIGSEGV);
if (ret != NOTIFY_STOP)
do_exit(SIGSEGV);
}
void arm_notify_die(const char *str, struct pt_regs *regs,

4
arch/arm/kernel/vmlinux.lds.S
View File

@ -43,10 +43,6 @@ SECTIONS
INIT_SETUP(16)
__early_begin = .;
*(.early_param.init)
__early_end = .;
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL

2
arch/arm/mach-aaec2000/include/mach/debug-macro.S
View File

@ -10,7 +10,7 @@
*/
#include "hardware.h"
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical

23
arch/arm/mach-at91/Kconfig
View File

@ -89,6 +89,12 @@ config ARCH_AT91CAP9
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
config ARCH_AT572D940HF
bool "AT572D940HF"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91X40
bool "AT91x40"
@ -390,6 +396,23 @@ endif
# ----------------------------------------------------------
if ARCH_AT572D940HF
comment "AT572D940HF Board Type"
config MACH_AT572D940HFEB
bool "AT572D940HF-EK"
depends on ARCH_AT572D940HF
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
<http://www.atmel.com/products/diopsis/default.asp>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"

4
arch/arm/mach-at91/Makefile
View File

@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@ -69,6 +70,9 @@ obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
# AT572D940HF board-specific support
obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o

377
arch/arm/mach-at91/at572d940hf.c Normal file
View File

@ -0,0 +1,377 @@
/*
* arch/arm/mach-at91/at572d940hf.c
*
* Antonio R. Costa <costa.antonior@gmail.com>
* Copyright (C) 2008 Atmel
*
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at572d940hf.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include "generic.h"
#include "clock.h"
static struct map_desc at572d940hf_io_desc[] __initdata = {
{
.virtual = AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
.pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
.length = AT572D940HF_SRAM_SIZE,
.type = MT_DEVICE,
},
};
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT572D940HF_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT572D940HF_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT572D940HF_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "macb_clk",
.pmc_mask = 1 << AT572D940HF_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT572D940HF_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT572D940HF_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT572D940HF_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.pmc_mask = 1 << AT572D940HF_ID_MCI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udc_clk = {
.name = "udc_clk",
.pmc_mask = 1 << AT572D940HF_ID_UDP,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pmc_mask = 1 << AT572D940HF_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pmc_mask = 1 << AT572D940HF_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pmc_mask = 1 << AT572D940HF_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pmc_mask = 1 << AT572D940HF_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pmc_mask = 1 << AT572D940HF_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc2_clk = {
.name = "ssc2_clk",
.pmc_mask = 1 << AT572D940HF_ID_SSC2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT572D940HF_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc1_clk = {
.name = "tc1_clk",
.pmc_mask = 1 << AT572D940HF_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc2_clk = {
.name = "tc2_clk",
.pmc_mask = 1 << AT572D940HF_ID_TC2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT572D940HF_ID_UHP,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc3_clk = {
.name = "ssc3_clk",
.pmc_mask = 1 << AT572D940HF_ID_SSC3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pmc_mask = 1 << AT572D940HF_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk can0_clk = {
.name = "can0_clk",
.pmc_mask = 1 << AT572D940HF_ID_CAN0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk can1_clk = {
.name = "can1_clk",
.pmc_mask = 1 << AT572D940HF_ID_CAN1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mAgicV_clk = {
.name = "mAgicV_clk",
.pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&macb_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&mmc_clk,
&udc_clk,
&twi0_clk,
&spi0_clk,
&spi1_clk,
&ssc0_clk,
&ssc1_clk,
&ssc2_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
&ohci_clk,
&ssc3_clk,
&twi1_clk,
&can0_clk,
&can1_clk,
&mAgicV_clk,
/* irq0 .. irq2 */
};
/*
* The five programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 2,
};
static struct clk pck3 = {
.name = "pck3",
.pmc_mask = AT91_PMC_PCK3,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 3,
};
static struct clk mAgicV_mem_clk = {
.name = "mAgicV_mem_clk",
.pmc_mask = AT91_PMC_PCK4,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 4,
};
/* HClocks */
static struct clk hck0 = {
.name = "hck0",
.pmc_mask = AT91_PMC_HCK0,
.type = CLK_TYPE_SYSTEM,
.id = 0,
};
static struct clk hck1 = {
.name = "hck1",
.pmc_mask = AT91_PMC_HCK1,
.type = CLK_TYPE_SYSTEM,
.id = 1,
};
static void __init at572d940hf_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
clk_register(&mAgicV_mem_clk);
clk_register(&hck0);
clk_register(&hck1);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at572d940hf_gpio[] = {
{
.id = AT572D940HF_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
}, {
.id = AT572D940HF_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
}, {
.id = AT572D940HF_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
}
};
static void at572d940hf_reset(void)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT572D940HF processor initialization
* -------------------------------------------------------------------- */
void __init at572d940hf_initialize(unsigned long main_clock)
{
/* Map peripherals */
iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
at91_arch_reset = at572d940hf_reset;
at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
| (1 << AT572D940HF_ID_IRQ2);
/* Init clock subsystem */
at91_clock_init(main_clock);
/* Register the processor-specific clocks */
at572d940hf_register_clocks();
/* Register GPIO subsystem */
at91_gpio_init(at572d940hf_gpio, 3);
}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
0, /* Parallel IO Controller A */
0, /* Parallel IO Controller B */
0, /* Parallel IO Controller C */
3, /* Ethernet */
6, /* USART 0 */
6, /* USART 1 */
6, /* USART 2 */
0, /* Multimedia Card Interface */
4, /* USB Device Port */
0, /* Two-Wire Interface 0 */
6, /* Serial Peripheral Interface 0 */
6, /* Serial Peripheral Interface 1 */
5, /* Serial Synchronous Controller 0 */
5, /* Serial Synchronous Controller 1 */
5, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
3, /* USB Host port */
3, /* Serial Synchronous Controller 3 */
0, /* Two-Wire Interface 1 */
0, /* CAN Controller 0 */
0, /* CAN Controller 1 */
0, /* mAgicV HALT line */
0, /* mAgicV SIRQ0 line */
0, /* mAgicV exception line */
0, /* mAgicV end of DMA line */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
};
void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at572d940hf_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}

970
arch/arm/mach-at91/at572d940hf_devices.c Normal file
View File

@ -0,0 +1,970 @@
/*
* arch/arm/mach-at91/at572d940hf_devices.c
*
* Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at572d940hf.h>
#include <mach/at572d940hf_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* USB Host
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
[0] = {
.start = AT572D940HF_UHP_BASE,
.end = AT572D940HF_UHP_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_UHP,
.end = AT572D940HF_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_usbh_device = {
.name = "at91_ohci",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
.num_resources = ARRAY_SIZE(usbh_resources),
};
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
if (!data)
return;
usbh_data = *data;
platform_device_register(&at572d940hf_usbh_device);
}
#else
void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
[0] = {
.start = AT572D940HF_BASE_UDP,
.end = AT572D940HF_BASE_UDP + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_UDP,
.end = AT572D940HF_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_udc_device = {
.name = "at91_udc",
.id = -1,
.dev = {
.platform_data = &udc_data,
},
.resource = udc_resources,
.num_resources = ARRAY_SIZE(udc_resources),
};
void __init at91_add_device_udc(struct at91_udc_data *data)
{
if (!data)
return;
if (data->vbus_pin) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
/* Pullup pin is handled internally */
udc_data = *data;
platform_device_register(&at572d940hf_udc_device);
}
#else
void __init at91_add_device_udc(struct at91_udc_data *data) {}
#endif
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
[0] = {
.start = AT572D940HF_BASE_EMAC,
.end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_EMAC,
.end = AT572D940HF_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_eth_device = {
.name = "macb",
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
/* Only RMII is supported */
data->is_rmii = 1;
/* Pins used for RMII */
at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
eth_data = *data;
platform_device_register(&at572d940hf_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
.start = AT572D940HF_BASE_MCI,
.end = AT572D940HF_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_MCI,
.end = AT572D940HF_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_mmc_device = {
.name = "at91_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
/* input/irq */
if (data->det_pin) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
at91_set_A_periph(AT91_PIN_PC22, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PC23, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PC24, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PC25, 1);
at91_set_A_periph(AT91_PIN_PC26, 1);
at91_set_A_periph(AT91_PIN_PC27, 1);
}
mmc_data = *data;
platform_device_register(&at572d940hf_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
* -------------------------------------------------------------------- */
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
static struct atmel_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
.end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at572d940hf_nand_device = {
.name = "atmel_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
.resource = nand_resources,
.num_resources = ARRAY_SIZE(nand_resources),
};
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
nand_data = *data;
platform_device_register(&at572d940hf_nand_device);
}
#else
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
/*
* Prefer the GPIO code since the TWI controller isn't robust
* (gets overruns and underruns under load) and can only issue
* repeated STARTs in one scenario (the driver doesn't yet handle them).
*/
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
static struct i2c_gpio_platform_data pdata = {
.sda_pin = AT91_PIN_PC7,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PC8,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
};
static struct platform_device at572d940hf_twi_device {
.name = "i2c-gpio",
.id = -1,
.dev.platform_data = &pdata,
};
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PC7, 1);
at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PC8, 1);
i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at572d940hf_twi_device);
}
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi0_resources[] = {
[0] = {
.start = AT572D940HF_BASE_TWI0,
.end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_TWI0,
.end = AT572D940HF_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_twi0_device = {
.name = "at91_i2c",
.id = 0,
.resource = twi0_resources,
.num_resources = ARRAY_SIZE(twi0_resources),
};
static struct resource twi1_resources[] = {
[0] = {
.start = AT572D940HF_BASE_TWI1,
.end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_TWI1,
.end = AT572D940HF_ID_TWI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_twi1_device = {
.name = "at91_i2c",
.id = 1,
.resource = twi1_resources,
.num_resources = ARRAY_SIZE(twi1_resources),
};
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI0 interface */
at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PC7, 1);
at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PC8, 1);
/* pins used for TWI1 interface */
at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PC20, 1);
at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PC21, 1);
i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at572d940hf_twi0_device);
platform_device_register(&at572d940hf_twi1_device);
}
#else
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
.start = AT572D940HF_BASE_SPI0,
.end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_SPI0,
.end = AT572D940HF_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_spi0_device = {
.name = "atmel_spi",
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
};
static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
static struct resource spi1_resources[] = {
[0] = {
.start = AT572D940HF_BASE_SPI1,
.end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_SPI1,
.end = AT572D940HF_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_spi1_device = {
.name = "atmel_spi",
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
};
static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
int i;
unsigned long cs_pin;
short enable_spi0 = 0;
short enable_spi1 = 0;
/* Choose SPI chip-selects */
for (i = 0; i < nr_devices; i++) {
if (devices[i].controller_data)
cs_pin = (unsigned long) devices[i].controller_data;
else if (devices[i].bus_num == 0)
cs_pin = spi0_standard_cs[devices[i].chip_select];
else
cs_pin = spi1_standard_cs[devices[i].chip_select];
if (devices[i].bus_num == 0)
enable_spi0 = 1;
else
enable_spi1 = 1;
/* enable chip-select pin */
at91_set_gpio_output(cs_pin, 1);
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
}
spi_register_board_info(devices, nr_devices);
/* Configure SPI bus(es) */
if (enable_spi0) {
at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi1_device);
}
}
#else
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* Timer/Counter blocks
* -------------------------------------------------------------------- */
#ifdef CONFIG_ATMEL_TCLIB
static struct resource tcb_resources[] = {
[0] = {
.start = AT572D940HF_BASE_TCB,
.end = AT572D940HF_BASE_TCB + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_TC0,
.end = AT572D940HF_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AT572D940HF_ID_TC1,
.end = AT572D940HF_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = AT572D940HF_ID_TC2,
.end = AT572D940HF_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at572d940hf_tcb_device = {
.name = "atmel_tcb",
.id = 0,
.resource = tcb_resources,
.num_resources = ARRAY_SIZE(tcb_resources),
};
static void __init at91_add_device_tc(void)
{
/* this chip has a separate clock and irq for each TC channel */
at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
platform_device_register(&at572d940hf_tcb_device);
}
#else
static void __init at91_add_device_tc(void) { }
#endif
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at572d940hf_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
.num_resources = ARRAY_SIZE(rtt_resources),
};
static void __init at91_add_device_rtt(void)
{
platform_device_register(&at572d940hf_rtt_device);
}
/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at572d940hf_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
};
static void __init at91_add_device_watchdog(void)
{
platform_device_register(&at572d940hf_wdt_device);
}
#else
static void __init at91_add_device_watchdog(void) {}
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_SYS,
.end = AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct platform_device at572d940hf_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
.dma_mask = &dbgu_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
};
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
}
static struct resource uart0_resources[] = {
[0] = {
.start = AT572D940HF_BASE_US0,
.end = AT572D940HF_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_US0,
.end = AT572D940HF_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
static struct platform_device at572d940hf_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
.dma_mask = &uart0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
[0] = {
.start = AT572D940HF_BASE_US1,
.end = AT572D940HF_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_US1,
.end = AT572D940HF_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
static struct platform_device at572d940hf_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
.dma_mask = &uart1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
[0] = {
.start = AT572D940HF_BASE_US2,
.end = AT572D940HF_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT572D940HF_ID_US2,
.end = AT572D940HF_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
static struct platform_device at572d940hf_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
.dma_mask = &uart2_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
switch (id) {
case 0: /* DBGU */
pdev = &at572d940hf_dbgu_device;
configure_dbgu_pins();
at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US0:
pdev = &at572d940hf_uart0_device;
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US1:
pdev = &at572d940hf_uart1_device;
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US2:
pdev = &at572d940hf_uart2_device;
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
}
pdev->id = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
}
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
{
int i;
for (i = 0; i < ATMEL_MAX_UART; i++) {
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
if (!atmel_default_console_device)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
/* --------------------------------------------------------------------
* mAgic
* -------------------------------------------------------------------- */
#ifdef CONFIG_MAGICV
static struct resource mAgic_resources[] = {
{
.start = AT91_MAGIC_PM_BASE,
.end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT91_MAGIC_DM_I_BASE,
.end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT91_MAGIC_DM_F_BASE,
.end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT91_MAGIC_DM_DB_BASE,
.end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT91_MAGIC_REGS_BASE,
.end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT91_MAGIC_EXTPAGE_BASE,
.end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = AT572D940HF_ID_MSIRQ0,
.end = AT572D940HF_ID_MSIRQ0,
.flags = IORESOURCE_IRQ,
},
{
.start = AT572D940HF_ID_MHALT,
.end = AT572D940HF_ID_MHALT,
.flags = IORESOURCE_IRQ,
},
{
.start = AT572D940HF_ID_MEXC,
.end = AT572D940HF_ID_MEXC,
.flags = IORESOURCE_IRQ,
},
{
.start = AT572D940HF_ID_MEDMA,
.end = AT572D940HF_ID_MEDMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mAgic_device = {
.name = "mAgic",
.id = -1,
.num_resources = ARRAY_SIZE(mAgic_resources),
.resource = mAgic_resources,
};
void __init at91_add_device_mAgic(void)
{
platform_device_register(&mAgic_device);
}
#else
void __init at91_add_device_mAgic(void) {}
#endif
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific
* setup.
*/
static int __init at91_add_standard_devices(void)
{
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
return 0;
}
arch_initcall(at91_add_standard_devices);

328
arch/arm/mach-at91/board-at572d940hf_ek.c Normal file
View File

@ -0,0 +1,328 @@
/*
* linux/arch/arm/mach-at91/board-at572d940hf_ek.c
*
* Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/ds1305.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
#include "generic.h"
static void __init eb_map_io(void)
{
/* Initialize processor: 12.500 MHz crystal */
at572d940hf_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx & Tx only) */
at91_register_uart(AT572D940HF_ID_US0, 1, 0);
/* USART1 on ttyS2. (Rx & Tx only) */
at91_register_uart(AT572D940HF_ID_US1, 2, 0);
/* USART2 on ttyS3. (Tx & Rx only */
at91_register_uart(AT572D940HF_ID_US2, 3, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init eb_init_irq(void)
{
at572d940hf_init_interrupts(NULL);
}
/*
* USB Host Port
*/
static struct at91_usbh_data __initdata eb_usbh_data = {
.ports = 2,
};
/*
* USB Device Port
*/
static struct at91_udc_data __initdata eb_udc_data = {
.vbus_pin = 0, /* no VBUS detection,UDC always on */
.pullup_pin = 0, /* pull-up driven by UDC */
};
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata eb_mmc_data = {
.wire4 = 1,
/* .det_pin = ... not connected */
/* .wp_pin = ... not connected */
/* .vcc_pin = ... not connected */
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata eb_eth_data = {
.phy_irq_pin = AT91_PIN_PB25,
.is_rmii = 1,
};
/*
* NOR flash
*/
static struct mtd_partition eb_nor_partitions[] = {
{
.name = "Raw Environment",
.offset = 0,
.size = SZ_4M,
.mask_flags = 0,
},
{
.name = "OS FS",
.offset = MTDPART_OFS_APPEND,
.size = 3 * SZ_1M,
.mask_flags = 0,
},
{
.name = "APP FS",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static void nor_flash_set_vpp(struct map_info* mi, int i) {
};
static struct physmap_flash_data nor_flash_data = {
.width = 4,
.parts = eb_nor_partitions,
.nr_parts = ARRAY_SIZE(eb_nor_partitions),
.set_vpp = nor_flash_set_vpp,
};
static struct resource nor_flash_resources[] = {
{
.start = AT91_CHIPSELECT_0,
.end = AT91_CHIPSELECT_0 + SZ_16M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_flash_data,
},
.resource = nor_flash_resources,
.num_resources = ARRAY_SIZE(nor_flash_resources),
};
static struct sam9_smc_config __initdata eb_nor_smc_config = {
.ncs_read_setup = 1,
.nrd_setup = 1,
.ncs_write_setup = 1,
.nwe_setup = 1,
.ncs_read_pulse = 7,
.nrd_pulse = 7,
.ncs_write_pulse = 7,
.nwe_pulse = 7,
.read_cycle = 9,
.write_cycle = 9,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
.tdf_cycles = 1,
};
static void __init eb_add_device_nor(void)
{
/* configure chip-select 0 (NOR) */
sam9_smc_configure(0, &eb_nor_smc_config);
platform_device_register(&nor_flash);
}
/*
* NAND flash
*/
static struct mtd_partition __initdata eb_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
.size = SZ_16M,
},
{
.name = "Partition 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
}
};
static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(eb_nand_partition);
return eb_nand_partition;
}
static struct atmel_nand_data __initdata eb_nand_data = {
.ale = 22,
.cle = 21,
/* .det_pin = ... not connected */
/* .rdy_pin = AT91_PIN_PC16, */
.enable_pin = AT91_PIN_PA15,
.partition_info = nand_partitions,
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
#endif
};
static struct sam9_smc_config __initdata eb_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 0,
.ncs_write_setup = 1,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 12,
};
static void __init eb_add_device_nand(void)
{
/* setup bus-width (8 or 16) */
if (eb_nand_data.bus_width_16)
eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &eb_nand_smc_config);
at91_add_device_nand(&eb_nand_data);
}
/*
* SPI devices
*/
static struct resource rtc_resources[] = {
[0] = {
.start = AT572D940HF_ID_IRQ1,
.end = AT572D940HF_ID_IRQ1,
.flags = IORESOURCE_IRQ,
},
};
static struct ds1305_platform_data ds1306_data = {
.is_ds1306 = true,
.en_1hz = false,
};
static struct spi_board_info eb_spi_devices[] = {
{ /* RTC Dallas DS1306 */
.modalias = "rtc-ds1305",
.chip_select = 3,
.mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
.max_speed_hz = 500000,
.bus_num = 0,
.irq = AT572D940HF_ID_IRQ1,
.platform_data = (void *) &ds1306_data,
},
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
{ /* Dataflash card */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
#endif
};
static void __init eb_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&eb_usbh_data);
/* USB Device */
at91_add_device_udc(&eb_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NOR */
eb_add_device_nor();
/* NAND */
eb_add_device_nand();
/* SPI */
at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
/* MMC */
at91_add_device_mmc(0, &eb_mmc_data);
/* Ethernet */
at91_add_device_eth(&eb_eth_data);
/* mAgic */
at91_add_device_mAgic();
}
MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
/* Maintainer: Atmel <costa.antonior@gmail.com> */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = eb_map_io,
.init_irq = eb_init_irq,
.init_machine = eb_board_init,
MACHINE_END

8
arch/arm/mach-at91/clock.c
View File

@ -29,6 +29,7 @@
#include <mach/cpu.h>
#include "clock.h"
#include "generic.h"
/*
@ -628,7 +629,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
cpu_is_at91sam9g10()) {
cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@ -711,12 +712,13 @@ int __init at91_clock_init(unsigned long main_clock)
/*
* USB HS clock init
*/
if (cpu_has_utmi())
if (cpu_has_utmi()) {
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
}
/*
* USB FS clock init
@ -746,7 +748,7 @@ int __init at91_clock_init(unsigned long main_clock)
mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
/* Register the PMC's standard clocks */

2
arch/arm/mach-at91/clock.h
View File

@ -22,7 +22,7 @@ struct clk {
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
unsigned id:2; /* PCK0..3, or 32k/main/a/b */
unsigned id:3; /* PCK0..4, or 32k/main/a/b */
unsigned type; /* clock type */
u16 users;
};

2
arch/arm/mach-at91/generic.h
View File

@ -17,6 +17,7 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@ -27,6 +28,7 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */

123
arch/arm/mach-at91/include/mach/at572d940hf.h Normal file
View File

@ -0,0 +1,123 @@
/*
* include/mach/at572d940hf.h
*
* Antonio R. Costa <costa.antonior@gmail.com>
* Copyright (C) 2008 Atmel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef AT572D940HF_H
#define AT572D940HF_H
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripherals */
#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
#define AT572D940HF_ID_US0 6 /* USART 0 */
#define AT572D940HF_ID_US1 7 /* USART 1 */
#define AT572D940HF_ID_US2 8 /* USART 2 */
#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
#define AT572D940HF_ID_UDP 10 /* USB Device Port */
#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
#define AT572D940HF_ID_UHP 20 /* USB Host port */
#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
/*
* User Peripheral physical base addresses.
*/
#define AT572D940HF_BASE_TCB 0xfffa0000
#define AT572D940HF_BASE_TC0 0xfffa0000
#define AT572D940HF_BASE_TC1 0xfffa0040
#define AT572D940HF_BASE_TC2 0xfffa0080
#define AT572D940HF_BASE_UDP 0xfffa4000
#define AT572D940HF_BASE_MCI 0xfffa8000
#define AT572D940HF_BASE_TWI0 0xfffac000
#define AT572D940HF_BASE_US0 0xfffb0000
#define AT572D940HF_BASE_US1 0xfffb4000
#define AT572D940HF_BASE_US2 0xfffb8000
#define AT572D940HF_BASE_SSC0 0xfffbc000
#define AT572D940HF_BASE_SSC1 0xfffc0000
#define AT572D940HF_BASE_SSC2 0xfffc4000
#define AT572D940HF_BASE_SPI0 0xfffc8000
#define AT572D940HF_BASE_SPI1 0xfffcc000
#define AT572D940HF_BASE_SSC3 0xfffd0000
#define AT572D940HF_BASE_TWI1 0xfffd4000
#define AT572D940HF_BASE_EMAC 0xfffd8000
#define AT572D940HF_BASE_CAN0 0xfffdc000
#define AT572D940HF_BASE_CAN1 0xfffe0000
#define AT91_BASE_SYS 0xffffea00
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_USART0 AT572D940HF_ID_US0
#define AT91_USART1 AT572D940HF_ID_US1
#define AT91_USART2 AT572D940HF_ID_US2
/*
* Internal Memory.
*/
#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
#endif

123
arch/arm/mach-at91/include/mach/at572d940hf_matrix.h Normal file
View File

@ -0,0 +1,123 @@
/*
* include/mach//at572d940hf_matrix.h
*
* Antonio R. Costa <costa.antonior@gmail.com>
* Copyright (C) 2008 Atmel
*
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef AT572D940HF_MATRIX_H
#define AT572D940HF_MATRIX_H
#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
/*
* The following registers / bits are not defined in the Datasheet (Revision A)
*/
#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_ITCM_64 (7 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#endif

1
arch/arm/mach-at91/include/mach/at91_pmc.h
View File

@ -32,6 +32,7 @@
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */

5
arch/arm/mach-at91/include/mach/board.h
View File

@ -87,7 +87,7 @@ struct at91_eth_data {
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
|| defined(CONFIG_ARCH_AT91SAM9G45)
|| defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
#define eth_platform_data at91_eth_data
#endif
@ -205,6 +205,9 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
/* AT572D940HF DSP */
extern void __init at91_add_device_mAgic(void);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);

8
arch/arm/mach-at91/include/mach/cpu.h
View File

@ -33,6 +33,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
#define ARCH_ID_AT572D940HF 0x0e0303e0
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@ -141,6 +143,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91cap9_revC() (0)
#endif
#ifdef CONFIG_ARCH_AT572D940HF
#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
#else
#define cpu_is_at572d940hf() (0)
#endif
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.

2
arch/arm/mach-at91/include/mach/debug-macro.S
View File

@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)

2
arch/arm/mach-at91/include/mach/hardware.h
View File

@ -32,6 +32,8 @@
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#elif defined(CONFIG_ARCH_AT572D940HF)
#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif

5
arch/arm/mach-at91/include/mach/timex.h
View File

@ -82,6 +82,11 @@
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
#elif defined(CONFIG_ARCH_AT572D940HF)
#define AT572D940HF_MASTER_CLOCK 80000000
#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
#endif
#endif

3
arch/arm/mach-bcmring/core.c
View File

@ -142,8 +142,7 @@ void __init bcmring_amba_init(void)
chipcHw_busInterfaceClockEnable(bus_clock);
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];

2
arch/arm/mach-clps711x/include/mach/debug-macro.S
View File

@ -13,7 +13,7 @@
#include <asm/hardware/clps7111.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #CLPS7111_PHYS_BASE

2
arch/arm/mach-davinci/include/mach/debug-macro.S
View File

@ -19,7 +19,7 @@
#include <linux/serial_reg.h>
#define UART_SHIFT 2
.macro addruart, rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x01000000 @ physical base address

2
arch/arm/mach-davinci/include/mach/hardware.h
View File

@ -27,7 +27,7 @@
/*
* I/O mapping
*/
#define IO_PHYS 0x01c00000
#define IO_PHYS 0x01c00000UL
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)

2
arch/arm/mach-davinci/io.c
View File

@ -24,7 +24,7 @@ void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
return __arm_ioremap(p, size, type);
return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
}
EXPORT_SYMBOL(davinci_ioremap);

2
arch/arm/mach-dove/include/mach/debug-macro.S
View File

@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE

2
arch/arm/mach-dove/include/mach/vmalloc.h
View File

@ -2,4 +2,4 @@
* arch/arm/mach-dove/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfd800000
#define VMALLOC_END 0xfd800000UL

2
arch/arm/mach-ebsa110/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
*
**/
.macro addruart,rx
.macro addruart, rx, tmp
mov \rx, #0xf0000000
orr \rx, \rx, #0x00000be0
.endm

14
arch/arm/mach-ep93xx/Kconfig
View File

@ -161,6 +161,20 @@ config MACH_MICRO9S
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
config MACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the Bluewater
Systems Snapper CL15 Module.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET

2
arch/arm/mach-ep93xx/Makefile
View File

@ -10,4 +10,6 @@ obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o

32
arch/arm/mach-ep93xx/clock.c
View File

@ -10,6 +10,8 @@
* your option) any later version.
*/
#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@ -445,37 +447,39 @@ static void __init ep93xx_dma_clock_init(void)
static int __init ep93xx_clock_init(void)
{
u32 value;
int i;
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
/* Determine the bootloader configured pll1 rate */
value = __raw_readl(EP93XX_SYSCON_CLKSET1);
if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
} else {
else
clk_pll1.rate = calc_pll_rate(value);
}
/* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
/* Determine the bootloader configured pll2 rate */
value = __raw_readl(EP93XX_SYSCON_CLKSET2);
if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
} else if (value & 0x00040000) { /* PLL2 enabled? */
else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
} else {
else
clk_pll2.rate = 0;
}
/* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
for (i = 0; i < ARRAY_SIZE(clocks); i++)
clkdev_add(&clocks[i]);
clkdev_add_table(clocks, ARRAY_SIZE(clocks));
return 0;
}
arch_initcall(ep93xx_clock_init);

275
arch/arm/mach-ep93xx/core.c
View File

@ -14,12 +14,15 @@
* your option) any later version.
*/
#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/timex.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@ -35,7 +38,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@ -82,13 +84,40 @@ void __init ep93xx_map_io(void)
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
static unsigned int last_jiffy_time;
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_TIMER123_CLOCK 508469
#define EP93XX_TIMER4_CLOCK 983040
#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
static unsigned int last_jiffy_time;
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
/* Writing any value clears the timer interrupt */
__raw_writel(1, EP93XX_TIMER1_CLEAR);
/* Recover lost jiffies */
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
@ -107,13 +136,18 @@ static struct irqaction ep93xx_timer_irq = {
static void __init ep93xx_timer_init(void)
{
u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
EP93XX_TIMER123_CONTROL_CLKSEL;
/* Enable periodic HZ timer. */
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
__raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
__raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
@ -134,238 +168,17 @@ struct sys_timer ep93xx_timer = {
};
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
static unsigned char gpio_int_debounce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
__raw_writeb(gpio_int_type2[port],
EP93XX_GPIO_REG(int_type2_register_offset[port]));
__raw_writeb(gpio_int_type1[port],
EP93XX_GPIO_REG(int_type1_register_offset[port]));
__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if (enable)
gpio_int_debounce[port] |= port_mask;
else
gpio_int_debounce[port] &= ~port_mask;
__raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned char status;
int i;
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
generic_handle_irq(gpio_irq);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
generic_handle_irq(gpio_irq);
}
}
}
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
/*
* map discontiguous hw irq range to continous sw irq range:
*
* IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
*/
int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
generic_handle_irq(gpio_irq);
}
static void ep93xx_gpio_irq_ack(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
ep93xx_gpio_update_int_params(port);
}
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
gpio_int_unmasked[port] &= ~port_mask;
ep93xx_gpio_update_int_params(port);
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] &= ~(1 << (line & 7));
ep93xx_gpio_update_int_params(port);
}
static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] |= 1 << (line & 7);
ep93xx_gpio_update_int_params(port);
}
/*
* gpio_int_type1 controls whether the interrupt is level (0) or
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct irq_desc *desc = irq_desc + irq;
const int gpio = irq_to_gpio(irq);
const int port = gpio >> 3;
const int port_mask = 1 << (gpio & 7);
gpio_direction_input(gpio);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_edge_irq;
break;
case IRQ_TYPE_EDGE_FALLING:
gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_edge_irq;
break;
case IRQ_TYPE_LEVEL_HIGH:
gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_level_irq;
break;
case IRQ_TYPE_LEVEL_LOW:
gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_level_irq;
break;
case IRQ_TYPE_EDGE_BOTH:
gpio_int_type1[port] |= port_mask;
/* set initial polarity based on current input level */
if (gpio_get_value(gpio))
gpio_int_type2[port] &= ~port_mask; /* falling */
else
gpio_int_type2[port] |= port_mask; /* rising */
desc->handle_irq = handle_edge_irq;
break;
default:
pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
type, gpio);
return -EINVAL;
}
gpio_int_enabled[port] |= port_mask;
desc->status &= ~IRQ_TYPE_SENSE_MASK;
desc->status |= type & IRQ_TYPE_SENSE_MASK;
ep93xx_gpio_update_int_params(port);
return 0;
}
static struct irq_chip ep93xx_gpio_irq_chip = {
.name = "GPIO",
.ack = ep93xx_gpio_irq_ack,
.mask_ack = ep93xx_gpio_irq_mask_ack,
.mask = ep93xx_gpio_irq_mask,
.unmask = ep93xx_gpio_irq_unmask,
.set_type = ep93xx_gpio_irq_type,
};
extern void ep93xx_gpio_init_irq(void);
void __init ep93xx_init_irq(void)
{
int gpio_irq;
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
set_irq_handler(gpio_irq, handle_level_irq);
set_irq_flags(gpio_irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
ep93xx_gpio_init_irq();
}
@ -572,9 +385,9 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
* CMOS driver.
*/
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
pr_warning("sda != EEDAT, open drain has no effect\n");
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
pr_warning("scl != EECLK, open drain has no effect\n");
__raw_writel((data->sda_is_open_drain << 1) |
(data->scl_is_open_drain << 0),

6
arch/arm/mach-ep93xx/dma-m2p.c
View File

@ -28,6 +28,8 @@
* with this implementation.
*/
#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@ -173,7 +175,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
switch (m2p_channel_state(ch)) {
case STATE_IDLE:
pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
pr_crit("dma interrupt without a dma buffer\n");
BUG();
break;
@ -197,7 +199,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
break;
case STATE_NEXT:
pr_crit("m2p_irq: dma interrupt while next\n");
pr_crit("dma interrupt while next\n");
BUG();
break;
}

21
arch/arm/mach-ep93xx/edb93xx.c
View File

@ -118,12 +118,33 @@ static void __init edb93xx_register_i2c(void)
}
}
/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
{
if (machine_is_edb9301() ||
machine_is_edb9302() || machine_is_edb9302a()) {
/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
ep93xx_register_pwm(0, 1);
} else if (machine_is_edb9307() || machine_is_edb9307a()) {
/* EP9307 only has pwm.0 (PWMOUT) */
ep93xx_register_pwm(1, 0);
} else {
/* EP9312 and EP9315 have both */
ep93xx_register_pwm(1, 1);
}
}
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
edb93xx_register_pwm();
}

235
arch/arm/mach-ep93xx/gpio.c
View File

@ -13,6 +13,8 @@
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
@ -22,6 +24,235 @@
#include <mach/hardware.h>
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
static unsigned char gpio_int_debounce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
__raw_writeb(gpio_int_type2[port],
EP93XX_GPIO_REG(int_type2_register_offset[port]));
__raw_writeb(gpio_int_type1[port],
EP93XX_GPIO_REG(int_type1_register_offset[port]));
__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if (enable)
gpio_int_debounce[port] |= port_mask;
else
gpio_int_debounce[port] &= ~port_mask;
__raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned char status;
int i;
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
generic_handle_irq(gpio_irq);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
generic_handle_irq(gpio_irq);
}
}
}
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
/*
* map discontiguous hw irq range to continous sw irq range:
*
* IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
*/
int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
generic_handle_irq(gpio_irq);
}
static void ep93xx_gpio_irq_ack(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
ep93xx_gpio_update_int_params(port);
}
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
gpio_int_unmasked[port] &= ~port_mask;
ep93xx_gpio_update_int_params(port);
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] &= ~(1 << (line & 7));
ep93xx_gpio_update_int_params(port);
}
static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] |= 1 << (line & 7);
ep93xx_gpio_update_int_params(port);
}
/*
* gpio_int_type1 controls whether the interrupt is level (0) or
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct irq_desc *desc = irq_desc + irq;
const int gpio = irq_to_gpio(irq);
const int port = gpio >> 3;
const int port_mask = 1 << (gpio & 7);
gpio_direction_input(gpio);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_edge_irq;
break;
case IRQ_TYPE_EDGE_FALLING:
gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_edge_irq;
break;
case IRQ_TYPE_LEVEL_HIGH:
gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_level_irq;
break;
case IRQ_TYPE_LEVEL_LOW:
gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_level_irq;
break;
case IRQ_TYPE_EDGE_BOTH:
gpio_int_type1[port] |= port_mask;
/* set initial polarity based on current input level */
if (gpio_get_value(gpio))
gpio_int_type2[port] &= ~port_mask; /* falling */
else
gpio_int_type2[port] |= port_mask; /* rising */
desc->handle_irq = handle_edge_irq;
break;
default:
pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
return -EINVAL;
}
gpio_int_enabled[port] |= port_mask;
desc->status &= ~IRQ_TYPE_SENSE_MASK;
desc->status |= type & IRQ_TYPE_SENSE_MASK;
ep93xx_gpio_update_int_params(port);
return 0;
}
static struct irq_chip ep93xx_gpio_irq_chip = {
.name = "GPIO",
.ack = ep93xx_gpio_irq_ack,
.mask_ack = ep93xx_gpio_irq_mask_ack,
.mask = ep93xx_gpio_irq_mask,
.unmask = ep93xx_gpio_irq_unmask,
.set_type = ep93xx_gpio_irq_type,
};
void __init ep93xx_gpio_init_irq(void)
{
int gpio_irq;
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
set_irq_handler(gpio_irq, handle_level_irq);
set_irq_flags(gpio_irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
}
/*************************************************************************
* gpiolib interface for EP93xx on-chip GPIOs
*************************************************************************/
struct ep93xx_gpio_chip {
struct gpio_chip chip;
@ -31,10 +262,6 @@ struct ep93xx_gpio_chip {
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
/* From core.c */
extern void ep93xx_gpio_int_mask(unsigned line);
extern void ep93xx_gpio_update_int_params(unsigned port);
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);

2
arch/arm/mach-ep93xx/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base

22
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
View File

@ -92,21 +92,6 @@
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
@ -167,8 +152,11 @@
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)

2
arch/arm/mach-ep93xx/include/mach/vmalloc.h
View File

@ -2,4 +2,4 @@
* arch/arm/mach-ep93xx/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfe800000
#define VMALLOC_END 0xfe800000UL

97
arch/arm/mach-ep93xx/simone.c Normal file
View File

@ -0,0 +1,97 @@
/*
* arch/arm/mach-ep93xx/simone.c
* Simplemachines Sim.One support.
*
* Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
*
* Based on the 2.6.24.7 support:
* Copyright (C) 2009 Simplemachines
* MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct physmap_flash_data simone_flash_data = {
.width = 2,
};
static struct resource simone_flash_resource = {
.start = EP93XX_CS6_PHYS_BASE,
.end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device simone_flash = {
.name = "physmap-flash",
.id = 0,
.num_resources = 1,
.resource = &simone_flash_resource,
.dev = {
.platform_data = &simone_flash_data,
},
};
static struct ep93xx_eth_data simone_eth_data = {
.phy_id = 1,
};
static struct ep93xxfb_mach_info simone_fb_info = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
.scl_is_open_drain = 0,
.udelay = 0,
.timeout = 0,
};
static struct i2c_board_info __initdata simone_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
};
static void __init simone_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&simone_flash);
ep93xx_register_eth(&simone_eth_data, 1);
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = simone_init_machine,
MACHINE_END

172
arch/arm/mach-ep93xx/snappercl15.c Normal file
View File

@ -0,0 +1,172 @@
/*
* arch/arm/mach-ep93xx/snappercl15.c
* Bluewater Systems Snapper CL15 system module
*
* Copyright (C) 2009 Bluewater Systems Ltd
* Author: Ryan Mallon <ryan@bluewatersys.com>
*
* NAND code adapted from driver by:
* Andre Renaud <andre@bluewatersys.com>
* James R. McKaskill
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
*/
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40)
static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
static u16 nand_state = SNAPPERCL15_NAND_WPN;
u16 set;
if (ctrl & NAND_CTRL_CHANGE) {
set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
if (ctrl & NAND_NCE)
set &= ~SNAPPERCL15_NAND_CEN;
if (ctrl & NAND_CLE)
set |= SNAPPERCL15_NAND_CLE;
if (ctrl & NAND_ALE)
set |= SNAPPERCL15_NAND_ALE;
nand_state &= ~(SNAPPERCL15_NAND_CEN |
SNAPPERCL15_NAND_CLE |
SNAPPERCL15_NAND_ALE);
nand_state |= set;
__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
}
if (cmd != NAND_CMD_NONE)
__raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
}
static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
}
static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
static struct mtd_partition snappercl15_nand_parts[] = {
{
.name = "Kernel",
.offset = 0,
.size = SZ_2M,
},
{
.name = "Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct platform_nand_data snappercl15_nand_data = {
.chip = {
.nr_chips = 1,
.part_probe_types = snappercl15_nand_part_probes,
.partitions = snappercl15_nand_parts,
.nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
.options = NAND_NO_AUTOINCR,
.chip_delay = 25,
},
.ctrl = {
.dev_ready = snappercl15_nand_dev_ready,
.cmd_ctrl = snappercl15_nand_cmd_ctrl,
},
};
static struct resource snappercl15_nand_resource[] = {
{
.start = SNAPPERCL15_NAND_BASE,
.end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device snappercl15_nand_device = {
.name = "gen_nand",
.id = -1,
.dev.platform_data = &snappercl15_nand_data,
.resource = snappercl15_nand_resource,
.num_resources = ARRAY_SIZE(snappercl15_nand_resource),
};
static struct ep93xx_eth_data snappercl15_eth_data = {
.phy_id = 1,
};
static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
.scl_is_open_drain = 0,
.udelay = 0,
.timeout = 0,
};
static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
{
/* Audio codec */
I2C_BOARD_INFO("tlv320aic23", 0x1a),
},
};
static struct ep93xxfb_mach_info snappercl15_fb_info = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
};
static void __init snappercl15_init_machine(void)
{
ep93xx_init_devices();
ep93xx_register_eth(&snappercl15_eth_data, 1);
ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
ARRAY_SIZE(snappercl15_i2c_data));
ep93xx_register_fb(&snappercl15_fb_info);
platform_device_register(&snappercl15_nand_device);
}
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = snappercl15_init_machine,
MACHINE_END

7
arch/arm/mach-footbridge/common.c
View File

@ -32,12 +32,13 @@ unsigned int mem_fclk_21285 = 50000000;
EXPORT_SYMBOL(mem_fclk_21285);
static void __init early_fclk(char **arg)
static int __init early_fclk(char *arg)
{
mem_fclk_21285 = simple_strtoul(*arg, arg, 0);
mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
return 0;
}
__early_param("mem_fclk_21285=", early_fclk);
early_param("mem_fclk_21285", early_fclk);
static int __init parse_tag_memclk(const struct tag *tag)
{

4
arch/arm/mach-footbridge/include/mach/debug-macro.S
View File

@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x7c000000 @ physical
@ -32,7 +32,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x42000000

2
arch/arm/mach-gemini/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =GEMINI_UART_BASE @ physical

2
arch/arm/mach-gemini/include/mach/vmalloc.h
View File

@ -7,4 +7,4 @@
* (at your option) any later version.
*/
#define VMALLOC_END 0xF0000000
#define VMALLOC_END 0xf0000000UL

2
arch/arm/mach-h720x/include/mach/debug-macro.S
View File

@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address

3
arch/arm/mach-integrator/core.c
View File

@ -144,8 +144,7 @@ static int __init integrator_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];

2
arch/arm/mach-integrator/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
*
*/
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x16000000 @ physical base address

4
arch/arm/mach-integrator/integrator_cp.c
View File

@ -558,9 +558,7 @@ static void __init intcp_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(cp_lookups); i++)
clkdev_add(&cp_lookups[i]);
clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {

2
arch/arm/mach-iop13xx/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical

7
arch/arm/mach-iop13xx/io.c
View File

@ -61,9 +61,9 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
(cookie - IOP13XX_PCIE_LOWER_MEM_RA));
break;
case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
retval = __arm_ioremap(IOP13XX_PBI_LOWER_MEM_PA +
retval = __arm_ioremap_caller(IOP13XX_PBI_LOWER_MEM_PA +
(cookie - IOP13XX_PBI_LOWER_MEM_RA),
size, mtype);
size, mtype, __builtin_return_address(0));
break;
case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
@ -75,7 +75,8 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
break;
default:
retval = __arm_ioremap(cookie, size, mtype);
retval = __arm_ioremap_caller(cookie, size, mtype,
__builtin_return_address(0));
}
return retval;

2
arch/arm/mach-iop32x/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx
.macro addruart, rx, tmp
mov \rx, #0xfe000000 @ physical as well as virtual
orr \rx, \rx, #0x00800000 @ location of the UART
.endm

2
arch/arm/mach-iop32x/include/mach/vmalloc.h
View File

@ -2,4 +2,4 @@
* arch/arm/mach-iop32x/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfe000000
#define VMALLOC_END 0xfe000000UL

2
arch/arm/mach-iop33x/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical

2
arch/arm/mach-iop33x/include/mach/vmalloc.h
View File

@ -2,4 +2,4 @@
* arch/arm/mach-iop33x/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfe000000
#define VMALLOC_END 0xfe000000UL

2
arch/arm/mach-ixp2000/include/mach/debug-macro.S
View File

@ -11,7 +11,7 @@
*
*/
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc0000000 @ Physical base

2
arch/arm/mach-ixp2000/include/mach/vmalloc.h
View File

@ -17,4 +17,4 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
#define VMALLOC_END 0xfb000000
#define VMALLOC_END 0xfb000000UL

2
arch/arm/mach-ixp23xx/include/mach/debug-macro.S
View File

@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
.macro addruart,rx
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical

2
arch/arm/mach-ixp23xx/include/mach/vmalloc.h
View File

@ -7,4 +7,4 @@
* specific static I/O.
*/
#define VMALLOC_END (0xec000000)
#define VMALLOC_END (0xec000000UL)

Some files were not shown because too many files have changed in this diff Show More