Currently we do not know what variant (bit length) of the nec protocol
is used, other than from guessing from the length of the scancode. Now
nec will be handled the same way as the sony protocol or the rc6 protocol;
one variant per bit length.
In the future we might want to expose the rc protocol type to userspace
and we don't want to be introducing this world of pain into userspace
too.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The hardware does not decode the 16, 20 or 24 bit variety.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When reporting decoded protocol use the enum rather than the bitmap.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ir_raw_event_handle is called anyway after the hw fifo content stored
in nvt->buf[] has been written to the kfifo. There is not really a
benefit in the potential additional call to ir_raw_event_handle
whilst nvt->buf[] is being processed.
Getting rid of this additional call allows to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The call to nvt_get_rx_ir_data and nvt_process_rx_ir_data from
the ISR is protected with spinlock nvt->lock. Therefore it's
guaranteed that nvt->pkts is 0 when entering nvt_get_rx_ir_data
(as nvt->pkts is set to 0 at the end of nvt_process_rx_ir_data).
Having said that we can remove b_idx.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When removing module nuvoton-cir I get a fifo overrun warning.
It turned out to be caused by a spurious interrupt when the logical CIR
device is being disabled (although no interrupt source bit being set).
Reading the interrupt status register returns 0xff, therefore the fifo
overrun bit is mistakenly interpreted as being set.
Fix this by ignoring interrupts when interrupt source and status register
reads return 0xff.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This partly reverts commit 078600f514.
Due to the relocation of input_register_device() call, holding down a
button on an IR remote no longer resulted in repeated key down events.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check demod and ts locks and report lock status according to those.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use correct device for logging functions as we now have it due to
proper I2C client bindings.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add I2C driver bindings in order to support proper I2C driver
registration with driver core.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use 64-bit calculation.
Return error if tuner does not provide get_if_frequency() callback.
All currently used tuners has it.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
New IOCTLs (especially for the request API) do not necessarily need the
graph mutex acquired. Leave this up to the drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Refactor copying the IOCTL argument structs from the user space and back,
in order to reduce code copied around and make the implementation more
robust.
As a result, the copying is done while not holding the graph mutex.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Each IOCTL handler can be listed in an array instead of using a large and
cumbersome switch. Do that.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Preparation for refactoring media IOCTL handling to unify common parts.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of relying on the "simple-bus" compatible and the driver core
populating FIMC-IS child devices make the fimc-is driver populating
its child devices. This prevents issues related to accessing ISP_I2C
clock registers with corresponding power domain switched off, which
popped out after applying some pending IOMMU driver patches. Now the
I2C_ISP child devices will be instantiated only when required parent
device drivers are initialized and ready.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since commit 04f59143b5
("i2c: let I2C masters ignore their children for PM")
the power.ignore_children flag is set when registering an I2C
adapter. Since I2C transfers are not managed by the fimc-isp-i2c
driver its clients use pm_runtime_* calls directly to communicate
required power state of the bus controller.
However, when the power.ignore_children flag is set that doesn't
work, so clear that flag back after registering the adapter.
While at it drop pm_runtime_enable() call on the i2c_adapter
as it is already done by the I2C subsystem when registering
I2C adapter.
This patch is meant as a minimal change to fix the regression,
eventually the I2C_ISPx clock handling will be moved to the
top level fimc-is driver and whole runtime PM code is going to
be dropped from the fimc-is-i2c module.
Cc: <stable@vger.kernel.org> # 4.7+
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Suppresses following warnings:
s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC.1 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.0 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-IS-ISP was not initialized!
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is no need to keep all clocks prepared all the time. Call to
clk_prepare/unprepare can be done on demand from runtime pm callbacks
(it is allowed to call sleeping functions from that context).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds 3 more clocks to Exynos4 ISP driver. Enabling them is
needed to make the hardware operational. Till now it worked only because
those clocks were registered with IGNORE_UNUSED flag and were enabled
by default after SoC reset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is likely that checking the result of the memory allocation just above
is expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by linuxdoc[1] tool, using:
$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done
include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index
include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index
include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2
include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops
include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops
include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set
include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad
include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link
include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf
include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode
include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close
include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'
[1] https://return42.github.io/linuxdoc/linux.html
The above are real issues at the documentation. On several cases,
caused by cut-and-paste.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a few indentation issues to enable automated table reorganization
by a regex-based script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Merge back from docs-next in order to get the cdomain extension.
With such extension, the number of warnings when building docs
in nitpick mode reduced from 22 to 2 warnings.
* docs-next/docs-next:
docs/driver-model: fix typo
DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more
doc-rst:c-domain: function-like macros arguments
doc-rst:c-domain: fix sphinx version incompatibility
Documentation/filesystems: Fixed typo
docs: Don't format internal MPT docs
docs: split up serial-interfaces.rst
docs: Pull the HSI documentation together
docs: Special-case function-pointer parameters in kernel-doc
docs: make kernel-doc handle varargs properly
x86: fix memory ranges in mm documentation
documentation/scsi: Remove nodisconnect parameter
doc: ioctl: Add some clarifications to botching-up-ioctls
docs: split up the driver book
Docs: sphinxify device-drivers.tmpl
The driver is maintained and supported, document it as such.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The HW can capture both ODD and EVEN fields in separate buffers so it's
possible to support V4L2_FIELD_ALTERNATE. This patch add support for
this mode.
At probe time and when S_STD is called the driver will default to use
V4L2_FIELD_INTERLACED if the subdevice reports V4L2_FIELD_ALTERNATE. The
driver will only change the field type if the subdevice implements
G_STD, if not it will keep the default at V4L2_FIELD_ALTERNATE.
The user can always explicitly ask for V4L2_FIELD_ALTERNATE in S_FMT and
the driver will use that field format.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The height used for V4L2_FIELD_TOP and V4L2_FIELD_BOTTOM where wrong.
The frames only contain one field so the height should be half of the
frame.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It was not possible to scale beyond the image size of the video source
limitation. The output frame would be bigger but the captured image was
limited to the size of the video source.
The error was that the crop boundary was set after the requested frame
size and not the video source size. This patch breaks out the resetting
of the crop, compose and format to separate functions so the error wont
creep back.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver forced whatever field was set by the source subdevice to be
used. This patch allows the user to change from the default field.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The field V4L2_FIELD_INTERLACED is standard dependent and should not
unconditionally be equivalent to V4L2_FIELD_INTERLACED_TB.
This patch adds a check to see if the video standard can be obtained and
if it's a 60 Hz format. If the condition is met V4L2_FIELD_INTERLACED
is treated as V4L2_FIELD_INTERLACED_BT if not as
V4L2_FIELD_INTERLACED_TB.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the V4L2_SUBDEV_FORMAT_TRY is used in set_fmt the width, height etc
would not be filled.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The media bus format reported by the adv7180 is wrong. Steve Longerbeam
posted a patch which changed the format to UYVY8_2X8 with the commit
message:
Change the media bus format from YUYV8_2X8 to UYVY8_2X8. Colors
now look correct when capturing with the i.mx6 backend. The other
option is to set the SWPC bit in register 0x27 to swap the Cr and Cb
output samples.
The rcar-vin driver was developed and tested with the adv7180 and
therefor suffers from the same issue, looking for the wrong media bus
format. The two errors corrected each other.
This patch takes Steve's patch and merge it with a fix for rcar-vin
driver. The rcar-vin driver is used used in together with the adv7180
och Koelsch and this ensures it will not break while fixing the adv7180
issue. I checked wit Steve and he was fine with me merging the patches.
ADV7180 parts:
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Suggested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This driver has been replaced by the non-soc-camera rcar-vin driver.
The soc-camera framework is being deprecated, so drop this older
rcar-vin driver in favor of the newer version that does not rely on
this deprecated framework.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/platform/sti/hva/hva-v4l2.c:43:22: warning: symbol 'hva_encoders' was not declared. Should it be static?
drivers/media/platform/sti/hva/hva-v4l2.c:1401:24: warning: symbol 'hva_driver' was not declared. Should it be static?
Make these static.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These structures are only used to copy into other structures, so declare
them as const.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct dvb_tuner_ops i@p = { ... };
@ok1@
identifier r.i;
expression e;
position p;
@@
e = i@p
@ok2@
identifier r.i;
expression e1, e2;
position p;
@@
memcpy(e1, &i@p, e2)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct dvb_tuner_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct dvb_tuner_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We get 1 warning when building kernel with W=1:
drivers/staging/media/omap4iss/iss.c:64:6: warning: no previous prototype for 'omap4iss_flush' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
