Add the extended UART support on Armada 3700
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWgHNayMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71bHpAJ0QFOqPb3Et
NHXbvRjusO7ZZ+B6+wCff8at95p9E8X5ULnGpR7qINZHKh8=
=CdWu
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.15-2' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt64 for 4.15 (part 2)" from Gregory CLEMENT:
Add the extended UART support on Armada 3700
* tag 'mvebu-dt64-4.15-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-3720-espressobin: fill UART nodes
arm64: dts: marvell: armada-3720-db: enable second UART port
arm64: dts: marvell: armada-37xx: add second UART port
arm64: dts: marvell: armada-37xx: add UART clock
Two long awaited changes:
- Reintroduction of the new EMAC DT bindings that got reverted at the
last minute in 4.13
- Introduction of the AXP803/813 PMIC support
-----BEGIN PGP SIGNATURE-----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=96rw
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard:
Here are a few commits that would be great to get in 4.15, given how
long they've been hanging around.
The first and most important one is the reintroduction of the EMAC DT
changes after they've been reverted at the last minute in 4.13.
There's a arm64 patch that crept in because the H5 and H3 share a
common DTSI that is located in arch/arm, and merging that patch
through the arm64 PR, especially given the pull requests that have
already been sent, would just have generated too many conflicts.
* tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
ARM: dts: sunxi: Restore EMAC changes (boards)
ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
arm: dts: sunxi: h3/h5: Restore EMAC changes
dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
dt-bindings: net: Restore sun8i dwmac binding
This refactors the RTD1295 DT, preparing for (but not yet adding)
RTD1293 and RTD1296. Superfluous reg property entries are dropped.
DTs for PROBOX2 AVA and MeLE V9 TV boxes are added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8sRS
-----END PGP SIGNATURE-----
Merge tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into next/dt
Pull "Realtek ARM64 based SoC DT for v4.15" from Andreas Färber:
This refactors the RTD1295 DT, preparing for (but not yet adding)
RTD1293 and RTD1296. Superfluous reg property entries are dropped.
DTs for PROBOX2 AVA and MeLE V9 TV boxes are added.
* tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: dts: realtek: Add MeLE V9
dt-bindings: arm: realtek: Document MeLE V9
dt-bindings: Add vendor prefix for MeLE
arm64: dts: realtek: Factor out common RTD129x parts
arm64: dts: realtek: Add ProBox2 Ava
dt-bindings: arm: realtek: Add ProBox2 AVA
dt-bindings: Add vendor prefix for ProBox2
arm64: dts: realtek: Clean up RTD1295 UART reg property
This updates the Bubblegum-96 DT with a clock node for the debug UART.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5o4s
-----END PGP SIGNATURE-----
Merge tag 'actions-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM64 based SoC DT for v4.15" from Andreas Färber:
This updates the Bubblegum-96 DT with a clock node for the debug UART.
* tag 'actions-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
This updates the Guitar board DT with a clock node for the debug UART
and adds a new DT for the CubieBoard6.
It also updates the S500 DT with CPU power domains.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bu/n
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM based SoC DT for v4.15" from Andreas Färber:
This updates the Guitar board DT with a clock node for the debug UART
and adds a new DT for the CubieBoard6.
It also updates the S500 DT with CPU power domains.
* tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
Define a compatible string for Cubietech CubieBoard6.
Cc: support@cubietech.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
MT7623 has its own compatible in pinctrl driver so we don't need the
backward compatible for it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The current usb related nodes are out-of-date, so we make them be
consistent with the binding documents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch updates compatible string and clocks for the crypto node.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The TBS A711 has a micro-USB connector that can be used in OTG mode. Enable
it.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The TBS A711 is using an AXP813 PMIC. Let's add all the regulators for that
board, and migrate the current, dumb, regulators to the actual ones.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The WiFi side of the AP6212 WiFi/BT combo module is connected to
mmc1. There are also GPIOs for enable and interrupts. An external
clock from the AC100 RTC is also used.
Enable WiFi on this board by enabling mmc1 and adding the power
sequencing clocks and GPIO, as well as the chip's interrupt line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The WiFi side of the AP6330 WiFi/BT combo module is connected to
mmc1. There are also GPIOs for enable and interrupts. An external
clock from the AC100 RTC is also used.
Enable WiFi on this board by enabling mmc1 and adding the power
sequencing clocks and GPIO, as well as the chip's interrupt line.
For the WiFi module to correctly detect the frequency of its main
oscillator, the external low power clock must be set to 32768 Hz.
Their does not seem to be proper out-of-band interrupt support
for the BCM4330 chip within the AP6330 module. This part is left
out for now.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
mmc1 only has 1 possible pinmux setting.
Move any settings to the dtsi file and set it by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds device nodes for all the regulators of the AXP818 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds device nodes for all the regulators of the AXP813 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds device nodes for all the regulators of the AXP818 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs.
This includes the AXP813 and AXP818. There is no discernible difference
except the labeling. The AXP813 is paired with the A83T, while the
AXP818 is paired with the H8.
This patch adds a dtsi file for all the common bindings for these two
PMICs. Currently this is just listing all the regulator nodes. The
regulators are initialized based on their device node names.
In the future this would be expanded to include power supplies and
GPIO controllers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for H5
This reverts a part of commit 87e1f5e8bb ("arm64: dts: allwinner: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore all boards DT about dwmac-sun8i
This reverts partially commit fe45174b72 ("arm: dts: sunxi: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore sunxi-h3-h5.dtsi
This reverts partially commit fe45174b72 ("arm: dts: sunxi: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch add documentation about the MDIO switch used on sun8i-h3-emac
for integrated PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore dt-bindings documentation about dwmac-sun8i
This reverts commit 8aa33ec2f4 ("dt-bindings: net: Revert sun8i dwmac binding")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Fill ESPRESSObin uart0 node with pinctrl information like in the
Armada-3720-DB device tree (which uses the same node).
Also explain how to enable the second UART port available on the
headers. This second port is not enabled by default because both
headers are dedicated to expose general purpose pins and remapping
some of them to use the second UART would break existing users.
Suggested-by: László ÁSHIN <laszlo@ashin.hu>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable Armada-3720-DB second UART port by adding the corresponding
device tree node in the board DTS and enabling it.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add a node in Armada 37xx DTSI file for the second UART, with a
different compatible due to its extended IP which has some
differences with the first UART already in place.
Make use of this commit to also fully describe the first port and
use the same clear and named interrupt bindings for both ports.
The standard UART (UART0) uses level-interrupts while the extended
UART (UART1) uses edge-triggered interrupts.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the missing clock property to armada-3700 UART node.
This clock will be used to derive the prescaler value to comply with
the requested baudrate.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
- add support for new GPIO IRQ driver
-----BEGIN PGP SIGNATURE-----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=vVV3
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Pull "Amlogic 64-bit DT updates for v4.15, round 2" from Kevin Hilman:
- add support for new GPIO IRQ driver
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gx: add external PHY interrupt on some platforms
ARM64: dts: meson-gx: add gpio interrupt controller
ARM64: meson: enable MESON_IRQ_GPIO in Kconfig
ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply
- Add GICv3 ITS node and PCIe devcies for LS1088A support.
- Enable PCIe support for LS2088A SoC.
- Add OP-TEE support for various Layerscape SoCs, LS1012A, LS1043A,
LS1046A, LS1088A and LS208XA.
- Update DPAA QBMan nodes to use constant defines in the interrupt
description.
- Add DSPI device to support SPI-NOR on LS1012A based boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ7y0kAAoJEFBXWFqHsHzOE70H/iAI1WmTWW1kuc2d7w1pCZrP
m3aBdavPb6N2XT43HUDo5yuAVl84AvmoHWkOXeiAEgSTwuGCMcAT90P3v+MJQG5P
xFCuqEAYfKb4BwMNs3oBbgdWBErxOpqFGd58vvXbEHzGv6DCnJRD6euhVNMosTKv
QI62vZkbD3sR1aUcC/dLG0hCFRb7+fscL+sgtU0vnF5nWKQLXQ/eGCDhhh4mmY/5
sjgeCqhYeIBrhpoOLm8qK9CkRnf7nPZwSiTFhG1o0nHDqbmzTRU5zQrAEDGB9Ukg
pWDtHyIEkrmnzOucIbKVpFue7IldkR7WN2rslpkHhtDaK1gIYnhjO26toU7/f2U=
=T0d9
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "Freescale arm64 device tree updates for 4.15" from Shawn Guo:
- Add GICv3 ITS node and PCIe devcies for LS1088A support.
- Enable PCIe support for LS2088A SoC.
- Add OP-TEE support for various Layerscape SoCs, LS1012A, LS1043A,
LS1046A, LS1088A and LS208XA.
- Update DPAA QBMan nodes to use constant defines in the interrupt
description.
- Add DSPI device to support SPI-NOR on LS1012A based boards.
* tag 'imx-dt64-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: update the DPAA QBMan nodes
arm64: dts: ls1088a: add PCIe controller DT nodes
arm64: dts: ls1088a: add gicv3 ITS DT node
arm64: dts: ls2088a: add pcie support
arm64: dts: ls: Add optee node
dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list
dt-bindings: spi: Add fsl,ls1012a-dspi compatible string
arm64: dts: ls1012a: add the DTS node for DSPI support
On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1
On Armada 37xx:
- Fix UART register size
- Add vmmc regulator for SD on 3720 DB
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWeoPnCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71eWeAJ4yqhFToGh9
bLvyANmN33Lp0kYfEwCeKTJv715mvxAfJMYUMX7CUmgEAOs=
=9sls
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.15-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt64 for 4.15 (part 1)" from Gregory CLEMENT:
On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1
On Armada 37xx:
- Fix UART register size
- Add vmmc regulator for SD on 3720 DB
* tag 'mvebu-dt64-4.15-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP
arm64: dts: marvell: 7040-db: Document the gpio expander
arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB
arm64: dts: marvell: add NAND support on the 7040-DB board
arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1
arm64: dts: marvell: 8040-db: enable the SFP ports
arm64: dts: marvell: 7040-db: enable the SFP port
arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
arm64: dts: marvell: 37xx: remove empty line
arm64: dts: marvell: cp110: add PPv2 port interrupts
arm64: dts: marvell: add comphy nodes on cp110 master and slave
arm64: dts: marvell: extend the cp110 syscon register area length
arm64: dts: marvell: enable AP806 watchdog
arm64: dts: marvell: Fix A37xx UART0 register size
arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
arm64: dts: marvell: add UART muxing on Armada 7K/8K
* r8a7795 (H3) and r8a7796 (M3-W) SoCs
- Use R-Car Gen 3 fallback compat string for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
* r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
- Add dr_mode property for USB2.0 channel 0
Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
(CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Using dual-role channel (or not) is related to the type of USB receptor
on board specification. So, I added the property into the
salvator-common.dtsi."
- Add pfc node for USB3.0 channel 0
Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
USB3.0 channel 0, the USB3.0 host controller works without this setting
on the kernel. But, this setting should have salvator-common.dtsi. So,
this patch adds the pfc node for USB3.0 channel 0."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
- Correct audio_clkout
Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
"audio_clkout" should be same value."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
r8a77995 (D3) Draak boards
- Drop "avb_phy_int" from avb_pins
Shimoda-san says "Since the Ethernet AVB driver doesn't support
AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
pin, this patch removes the "avb_phy_int" from the avb_pins node."
* r8a77995 (D3) Draak board
- Enable PWM channels
Shimoda-san says "Each channel connects to LTC2644 for brightness
control."
* r8a77970 (V3M) Eagle and ULCB Kingfisher boards
- Add initial device tree support
-----BEGIN PGP SIGNATURE-----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=BmC8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:
* r8a7795 (H3) and r8a7796 (M3-W) SoCs
- Use R-Car Gen 3 fallback compat string for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
* r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
- Add dr_mode property for USB2.0 channel 0
Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
(CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Using dual-role channel (or not) is related to the type of USB receptor
on board specification. So, I added the property into the
salvator-common.dtsi."
- Add pfc node for USB3.0 channel 0
Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
USB3.0 channel 0, the USB3.0 host controller works without this setting
on the kernel. But, this setting should have salvator-common.dtsi. So,
this patch adds the pfc node for USB3.0 channel 0."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
- Correct audio_clkout
Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
"audio_clkout" should be same value."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
r8a77995 (D3) Draak boards
- Drop "avb_phy_int" from avb_pins
Shimoda-san says "Since the Ethernet AVB driver doesn't support
AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
pin, this patch removes the "avb_phy_int" from the avb_pins node."
* r8a77995 (D3) Draak board
- Enable PWM channels
Shimoda-san says "Each channel connects to LTC2644 for brightness
control."
* r8a77970 (V3M) Eagle and ULCB Kingfisher boards
- Add initial device tree support
* tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
arm64: dts: renesas: salvator-common: add dr_mode property for USB2.0 channel 0
arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat string
arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat string
arm64: renesas: ulcb: fixup audio_clkout
arm64: renesas: salvator-common: fixup audio_clkout
arm64: dts: renesas: eagle: add EtherAVB support
arm64: dts: r8a77995: Add INTC-EX device node
arm64: dts: r8a77970: Add INTC-EX device node
arm64: dts: r8a7796: Add INTC-EX device node
arm64: dts: ulcb-kf: hog USB3 hub control gpios
arm64: dts: ulcb-kf: enable PCA9548 on I2C4
arm64: dts: ulcb-kf: enable PCA9548 on I2C2
arm64: dts: ulcb-kf: enable TCA9539 on I2C4
arm64: dts: ulcb-kf: enable TCA9539 on I2C2
arm64: dts: ulcb-kf: enable USB3.0 Host
arm64: dts: ulcb-kf: enable PCIE0/1
arm64: dts: ulcb-kf: enable USB2.0 Host channel 0
arm64: dts: ulcb-kf: enable HSUSB
arm64: dts: ulcb-kf: enable CAN0/1
arm64: dts: ulcb-kf: enable SCIF1
...
Most notable changes:
- SPI and DMA support on the a64
- New boards: NanoPi NEO Plus2
-----BEGIN PGP SIGNATURE-----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=OAav
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner arm64 DT changes for 4.15" from Maxime Ripard:
Most notable changes:
- SPI and DMA support on the a64
- New boards: NanoPi NEO Plus2
* tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: allwinner: Correct unit name in devicetree binding example
arm64: allwinner: a64: add dma controller references to spi nodes
arm64: allwinner: a64: Add device node for DMA controller
arm64: allwinner: a64: Fix node with unit name and no reg property
arm64: allwinner: a64: Fix simple-bus unit address format error
arm64: allwinner: h5: add NanoPi NEO Plus2 DT support
arm64: allwinner: a64: add SPI nodes
- New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1
variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
Vining-2000 board.
- Use the 'vpcie-supply' property for PCIe device for boards
imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
- A series from Jagan Teki to update imx6qdl-icore board with audio,
touch and CAN support.
- Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
tempmon support for i.MX6UL.
- A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
and i.MX6 TX modules.
- Fix DTC warnings in i.MX device trees, dropping leading zeros from
unit address, correcting display nodes notation and display port
names, fixing nodes with unit name and no reg property.
- Other random device updates for various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ7ypUAAoJEFBXWFqHsHzOpVkH/RsZ3IMg8O5tMO6uz1CNmutR
3EAXfBeQTnQZe2A/3XkDRpJWGiIniRSVAf6rYipmeyV9jV2Ff4vfiv5gnhg1ev+B
eV35W3gb3EclHKrHgHVMkfzWfNp63L1etdVFrY0QuMc0wQbch0TwO3TTPHpk0+AS
eauLOMY1qzRVnayzZ8IeTn++igsoj4KT1NmIprNKe66eDAOfWxO0IB26r0svKrhg
mIlqTUG1p6I/H8h6hQZuRJaLM9no3dHDcm7Scbf1y8Mvf5mPVTTHKXGLLyEVT/UB
SEWydfAt0VEAEA+Uk6pFJsrG1KRx0hwF46DHk2BXj7A1wxBsUIPnMSoMRWgGrZE=
=grKK
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.15" from Shawn Guo:
- New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1
variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
Vining-2000 board.
- Use the 'vpcie-supply' property for PCIe device for boards
imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
- A series from Jagan Teki to update imx6qdl-icore board with audio,
touch and CAN support.
- Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
tempmon support for i.MX6UL.
- A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
and i.MX6 TX modules.
- Fix DTC warnings in i.MX device trees, dropping leading zeros from
unit address, correcting display nodes notation and display port
names, fixing nodes with unit name and no reg property.
- Other random device updates for various board support.
* tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
ARM: dts: imx53-tx53: fix interrupt flags
ARM: dts: imx28-tx28: fix interrupt flags
ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
ARM: dts: imx: add ZII RDU1 board
ARM: dts: imx: add support for TX6 modules on MB7 baseboard
ARM: dts: imx: add support for TX6QP
ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
ARM: dts: imx6-tx6: move display configuration to .dtsi file
ARM: dts: imx6-tx6: add support for I2C bus recovery
ARM: dts: imx6-tx6: convert to using simple-audio-card
ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
ARM: dts: imx6-tx6: add trickle-charge config for DS1339
ARM: dts: imx6-tx6: remove obsolete ipu1 alias
ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
...
[arnd: made sure we have no new leading zeroes in unit address during merge]
- McASP support for K2G EVM
- I2C support for K2G EVM
- USB support for K2G EVM
- SPI & SPI NOR flash support for K2G EVM
- ECAP PWM support for K2G EVM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZ6p7IAAoJEHJsHOdBp5c/jYgP/1iNiLSP4lIQeSjleJKt21+z
Sw62wLC5zJH8DxgOyUX+0p6pH5GpETTekVaIXQTT9h9JVFchleehDsFh5UHGcF+N
Q+B02DvDbHMSOrqYZ0JJWerKQqghS63NIPAfT+Loj0v8j7w3/iYeUQCb+aVHBlzx
/SYOfKi6C/7TzfDFnAurmsJ7jvIVLc3kKQlWLhraT/tSTsnfoOMflZnVzbcH2e1S
melKPVMiO5BSGoXZsMV+xI5AHNt88z4t0/cRVJo/xXXFbtn2JNWvL3Pwuk/6e2fm
dMDK4JQkaXNzgS07Szuxo1S1IE7+3Jl23o0nIHfmZkQ9ArgQZQH0AA+ZQqIgcSms
bUbWQCsgfYPbbOp0VLBPc5SiW/YoGLGhNe59zwK+x0d0EuXZNgoToUthpr01SJA8
YeRROa7ZAIEB+5D3is4H1c44t1tjGZekp+0ssIQAoU/c2X8MfcX8MqC8MceBEUOI
69JyM+u/AswLP6Kczvc/2KK9JbtKXwQwjbCbuvUHd5XM4wPKfvrWFfryfV09R6n2
/62QPULVGTwZJWN/FRisjRj3lUdamCzzNZ6uJSD8nfiAcQ4rOdzMQcv7K3BBuv87
FWq+NkOTR/1I3kXAjhNBJszZjrir/+Tu3rQ6F5LsoSl9Zx+LkPzt1BMvfEANJ5IF
8O7wxB3qu9sgPOrd+0Lc
=ynA8
-----END PGP SIGNATURE-----
Merge tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Pull "ARM: Keystone DTS update for 4.15" from Santosh Shilimkar:
- McASP support for K2G EVM
- I2C support for K2G EVM
- USB support for K2G EVM
- SPI & SPI NOR flash support for K2G EVM
- ECAP PWM support for K2G EVM
* tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2g-evm: add bindings for SPI NOR flash
ARM: dts: keystone-k2g: Add SPI nodes
ARM: dts: keystone-k2g-evm: Enable PWM ECAP0
ARM: dts: keystone-k2g: Add ECAP PWM DT nodes
ARM: dts: k2g-evm: Enable USB 0 and 1
ARM: dts: k2g: Add USB instances
ARM: dts: keystone-k2g-evm: Add I2C EEPROM DT entry
ARM: dts: keystone-k2g: Add I2C nodes
ARM: dts: keystone-k2g: Add McASP nodes
please pull the following:
- Eric adds support for the CLCD and PWM controller on Cygnus chis
- Loic fixes the console path on the Raspberry Pi 3 (already submitted as
fixes) and then proceeds with enabling the BCM43438 bluetooth chip on
the Raspberry Pi 3
- Rafal specifies the USB ports on the Luxul XWR-1200
- Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810
and XAP-1440 both based on BCM53573
- Florian adds support for the Broadcom Hurricane 2 SoC by adding general
machine binding, clock binding, SoC DTS include file and a DTS for the
Ubiquiti Networks UniFi Switch 8
-----BEGIN PGP SIGNATURE-----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=DmZ2
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.15" from Florian Fainelli:
This pull request contains Broadcom ARM-based Device Tree changes for 4.15,
please pull the following:
- Eric adds support for the CLCD and PWM controller on Cygnus chis
- Loic fixes the console path on the Raspberry Pi 3 (already submitted as
fixes) and then proceeds with enabling the BCM43438 bluetooth chip on
the Raspberry Pi 3
- Rafal specifies the USB ports on the Luxul XWR-1200
- Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810
and XAP-1440 both based on BCM53573
- Florian adds support for the Broadcom Hurricane 2 SoC by adding general
machine binding, clock binding, SoC DTS include file and a DTS for the
Ubiquiti Networks UniFi Switch 8
* tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8
dt-bindings: Add Ubiquiti Networks vendor prefix
ARM: dts: Add Broadcom Hurricane 2 DTS include file
dt-bindings: Document Broadcom Hurricane 2 clocks
dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
ARM: dts: BCM53573: Add DT for Luxul XAP-1440
ARM: dts: BCM53573: Add DT for Luxul XAP-810
ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200
ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave
ARM: dts: bcm283x: Fix console path on RPi3
ARM: dts: cygnus: Add the PWM node
ARM: dts: cygnus: Add the CLCD controller
