Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD and its initial
implementation.
This object is from type class FD and will be used to read DEVX
async events.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in the next patches.
Resolved the conflicts:
- esw_destroy_offloads_acl_tables() use the newer mlx5_esw_for_all_vports()
version
- esw_offloads_steering_init() drop the cap test
- esw_offloads_init() drop the extra function arguments
* branch 'mlx5-next': (39 commits)
net/mlx5: Expose device definitions for object events
net/mlx5: Report EQE data upon CQ completion
net/mlx5: Report a CQ error event only when a handler was set
net/mlx5: mlx5_core_create_cq() enhancements
net/mlx5: Expose the API to register for ANY event
net/mlx5: Use event mask based on device capabilities
net/mlx5: Fix mlx5_core_destroy_cq() error flow
net/mlx5: E-Switch, Handle UC address change in switchdev mode
net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop
net/mlx5: E-Switch, Use iterator for vlan and min-inline setups
net/mlx5: E-Switch, Reg/unreg function changed event at correct stage
net/mlx5: E-Switch, Consolidate eswitch function number of VFs
net/mlx5: E-Switch, Refactor eswitch SR-IOV interface
net/mlx5: Handle host PF vport mac/guid for ECPF
net/mlx5: E-Switch, Use correct flags when configuring vlan
net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs
net/mlx5: Don't handle VF func change if host PF is disabled
net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices
net/mlx5: Move pci status reg access mutex to mlx5_pci_init
net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently during dual port IB device registration in below code flow,
ib_register_device()
ib_device_register_sysfs()
ib_setup_port_attrs()
add_port()
get_counter_table()
get_perf_mad()
process_mad()
mlx5_ib_process_mad()
mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully
setup at the device level (because 2nd port is unaffiliated).
As a result, get_perf_mad() registers different PMA counter group for 1st
and 2nd port, namely pma_counter_ext and pma_counter. However both ports
have the same capability and counter offsets.
Due to this when counters are read by the user via sysfs in below code
flow, counters are queried from wrong location from the device mainly from
PPCNT instead of VPORT counters.
show_pma_counter()
get_perf_mad()
process_mad()
mlx5_ib_process_mad()
process_pma_cmd()
This shows all zero counters for 2nd port.
To overcome this, process_pma_cmd() is invoked, and when unaffiliated port
is not yet setup during device registration phase, make the query on the
first port. while at it, only process_pma_cmd() needs to work on the
native port number and underlying mdev, so shift the get, put calls to
where its needed inside process_pma_cmd().
Fixes: 212f2a87b7 ("IB/mlx5: Route MADs for dual port RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report EQE data upon CQ completion to let upper layers use this data.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Use the reported device capabilities for the supported user events (i.e.
affiliated and un-affiliated) to set the EQ mask.
As the event mask can be up to 256 defined by 4 entries of u64 change
the applicable code to work accordingly.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The API for ib_query_qp requires the driver to set qp_state and
cur_qp_state on return, add the missing sets.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use kmemdump instead of kzmalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
vzalloc has already zeroed the memory. So a memset is unneeded.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In commit af7ddd8a62 ("Merge tag 'dma-mapping-4.21' of
git://git.infradead.org/users/hch/dma-mapping"),
dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory.
So the memset after a coherent allocation function is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broken up commit to add the Soft iWarp RDMA driver.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF
can be at offload mode when SR-IOV is not enabled.
Rename the interface and eswitch mode names to decouple from SR-IOV,
and cleanup eswitch messages accordingly.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When an IB rep is loaded, netdev for the same vport is saved for later
reference. However, it's not cleaned up when doing unload. For ECPF,
kernel crashes when driver is referring to the already removed netdev.
Following steps lead to a shown call trace:
1. Create n VFs from host PF
2. Distroy the VFs
3. Run "rdma link" from ARM
Call trace:
mlx5_ib_get_netdev+0x9c/0xe8 [mlx5_ib]
mlx5_query_port_roce+0x268/0x558 [mlx5_ib]
mlx5_ib_rep_query_port+0x14/0x34 [mlx5_ib]
ib_query_port+0x9c/0xfc [ib_core]
fill_port_info+0x74/0x28c [ib_core]
nldev_port_get_doit+0x1a8/0x1e8 [ib_core]
rdma_nl_rcv_msg+0x16c/0x1c0 [ib_core]
rdma_nl_rcv+0xe8/0x144 [ib_core]
netlink_unicast+0x184/0x214
netlink_sendmsg+0x288/0x354
sock_sendmsg+0x18/0x2c
__sys_sendto+0xbc/0x138
__arm64_sys_sendto+0x28/0x34
el0_svc_common+0xb0/0x100
el0_svc_handler+0x6c/0x84
el0_svc+0x8/0xc
Cleanup the rep and netdev reference when unloading IB rep.
Fixes: 26628e2d58 ("RDMA/mlx5: Move to single device multiport ports in switchdev mode")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In the single IB device mode, the mapping between vport number and
rep relies on a counter. However for dynamic vport allocation, it is
desired to keep consistent map of eswitch vport and IB port.
Hence, simplify code to remove the free running counter and instead
use the available vport index during load/unload sequence from the
eswitch.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Suggested-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The call in debugfs.c for try_module_get() is not needed. A reference to
the module will be taken by the VFS layer as long as the owner field is
set in the file ops struct. So set this as well as remove the call.
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add trace to debug map_mr_sg handling.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch enhances the MR trace information to enable more focused debug
of MR issues.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This was missed in the original implementation of the memory management
extensions.
Fixes: 0db3dfa03c ("IB/hfi1: Work request processing for fast register mr and invalidate")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Uninline the aspm API since it increases code space for no reason.
Move the aspm module param to the new aspm C file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add some helper functions to hide struct rvt_swqe details.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a
non-zero reference count. IBTA 11.2.2 notes no such return value or error
case:
Output Modifiers:
- Verb results:
- Operation completed successfully.
- Invalid HCA handle.
- Invalid address handle.
ULPs never test for this error and this will leak memory.
The reference count exists to allow for driver independent progress
mechanisms to process UD SWQEs in parallel with post sends. The SWQE will
hold a reference count until the UD SWQE completes and then drops the
reference.
Fix by removing need to reference count the AH. Add a UD specific
allocation to each SWQE entry to cache the necessary information for
independent progress. Copy the information during the post send
processing.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently QP allowed_ops is set after the QP is completely initialized.
This curtails the use of this optimization for any initialization before
allowed_ops is set.
Fix by adding a helper to determine the correct allowed_ops and moving the
setting of the allowed_ops to just after QP allocation.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a completion queue is full, the associated queue pairs are not put
into the error state. According to the IBTA specification, this is a
violation.
Quote from IBTA spec:
C9-218: A Requester Class F error occurs when the CQ is inaccessible or
full and an attempt is made to complete a WQE. The Affected QP shall be
moved to the error state and affiliated asynchronous errors generated as
described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The
current WQE and any subsequent WQEs are left in an unknown state.
C11-37: The CI shall generate a CQ Error when a CQ overrun is
detected. This condition will result in an Affiliated Asynchronous Error
for any associated Work Queues when they attempt to use that
CQ. Completions can no longer be added to the CQ. It is not guaranteed
that completions present in the CQ at the time the error occurred can be
retrieved. Possible causes include a CQ overrun or a CQ protection error.
Put the qp in error state when cq is full. Implement a state called full
to continue to put other associated QPs in error state.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Usage of single lock prevents fetching posted and processing receive work
queue entries from progressing simultaneously and impacts overall
performance.
Fracture the single lock used for posting and processing Receive Work
Queue Entries (RWQEs) to allow the circular buffer to be filled and
emptied at the same time. Two new spinlocks - one for the producers and
one for the consumers used for posting and processing RWQEs simultaneously
and the two indices are define on two different cache lines. The threshold
count is used to avoid reading other index in different cache line every
time.
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the
providers but are not in uapi directory. As per the comment in
https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and
the rdma core driver are not using shared structures in the uapi
directory.
Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rvt_cq_wc struct elements are shared between rdmavt and the providers
but not in uapi directory. As per the comment in
https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and
the rdma core driver are not using shared structures in the uapi
directory.
In that case, move rvt_cq_wc struct into the rvt-abi.h header file and
create a rvt_k_cq_w for the kernel completion queue.
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If vport metadata matching is enabled in eswitch, the rule created
must be changed to match on the metadata, instead of source port.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor the flow data structures, add new flow_context and move
flow_tag into it, as flow_tag doesn't belong to the rule action.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is a spelling mistake in an dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For all string attributes for which we don't currently accept the element
as input, we only use it as output, set the string length to
RDMA_NLDEV_ATTR_EMPTY_STRING which is defined as 1. That way we will only
accept a null string for that element. This will prevent someone from
writing a new input routine that uses the element without also updating
the policy to have a valid value.
Also while there, make sure the existing entries that are valid have the
correct policy, if not, correct the policy. Remove unnecessary checks
for nla_strlcpy() overflow once the policy has been set correctly.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch removes the hns-roce.ko for cleanup all the exported symbols in
common part.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The InfiniBand docs are plain text with no markups. So, all we needed to
do were to add the title markups and some markup sequences in order to
properly parse tables, lists and literal blocks.
At its new index.rst, let's add a :orphan: while this is not linked to the
main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is supposed to return negative kernel error codes but here
it returns CMD_RST_PRC_EBUSY (2). The error code eventually gets passed
to IS_ERR() and since it's not an error pointer it leads to an Oops in
hns_roce_v1_rsv_lp_qp()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a potential integer overflow when int i is left shifted as this
is evaluated using 32 bit arithmetic but is being used in a context that
expects an expression of type dma_addr_t. Fix this by casting integer i
to dma_addr_t before shifting to avoid the overflow.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 2ac0bc5e72 ("RDMA/hns: Add a group interfaces for optimizing buffers getting flow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The lock protecting the data structure does not need to be an rwlock. The
only read access to the lock is in an error path, and if that's limiting
your scalability, you have bigger performance problems.
Eliminate mlx5_mkey_table in favour of using the xarray directly.
reg_mr_callback must use GFP_ATOMIC for allocating XArray nodes as it may
be called in interrupt context.
This also fixes a minor bug where SRCU locking was being used on the radix
tree read side, when RCU was needed too.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Improve code readability using static helpers for each memory region
type. Re-use the common logic to get smaller functions that are easy
to maintain and reduce code duplication.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If possibe, avoid doing a UMR operation to register data and protection
buffers (via MTT/KLM mkeys). Instead, use the local DMA key and map the
SG lists using PA access. This is safe, since the internal key for data
and protection never exposed to the remote server (only signature key
might be exposed). If PA mappings are not possible, perform mapping
using MTT/KLM descriptors.
The setup of the tested benchmark (using iSER ULP):
- 2 servers with 24 cores (1 initiator and 1 target)
- ConnectX-4/ConnectX-5 adapters
- 24 target sessions with 1 LUN each
- ramdisk backstore
- PI active
Performance results running fio (24 jobs, 128 iodepth) using
write_generate=1 and read_verify=1 (w/w.o patch):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1266.4K/1262.4K 1720.1K/1732.1K
4k 793139/570902 1129.6K/773982
32k 72660/72086 97229/96164
Using write_generate=0 and read_verify=0 (w/w.o patch):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1590.2K/1600.1K 1828.2K/1830.3K
4k 1078.1K/937272 1142.1K/815304
32k 77012/77369 98125/97435
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some loads, there is performance degradation when using KLM mkey
instead of MTT mkey. This is because KLM descriptor access is via
indirection that might require more HW resources and cycles.
Using KLM descriptor is not necessary when there are no gaps at the
data/metadata sg lists. As an optimization, use MTT mkey whenever it
is possible. For that matter, allocate internal MTT mkey and choose the
effective pi_mr for in transaction according to the required mapping
scheme.
The setup of the tested benchmark (using iSER ULP):
- 2 servers with 24 cores (1 initiator and 1 target)
- ConnectX-4/ConnectX-5 adapters
- 24 target sessions with 1 LUN each
- ramdisk backstore
- PI active
Performance results running fio (24 jobs, 128 iodepth) using
write_generate=1 and read_verify=1 (w/w.o/baseline):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1262.4K/1243.3K/1147.1K 1732.1K/1725.1K/1423.8K
4k 570902/571233/457874 773982/743293/642080
32k 72086/72388/71933 96164/71789/93249
Using write_generate=0 and read_verify=0 (w/w.o patch):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1600.1K/1572.1K/1393.3K 1830.3K/1823.5K/1557.2K
4k 937272/921992/762934 815304/753772/646071
32k 77369/75052/72058 97435/73180/94612
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Suggested-by: Max Gurtovoy <maxg@mellanox.com>
Suggested-by: Idan Burstein <idanb@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
