This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
which uses MIPI DSI bus to communicate with panel. The panel has
320×320 resolution in 1.63" physical panel. This panel is used in
Samsung Galaxy Gear 2.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-3-git-send-email-hoegeun.kwon@samsung.com
Archit requested this backmerge to facilitate merging some patches
depending on changes between -rc2 & -rc5
Signed-off-by: Sean Paul <seanpaul@chromium.org>
NULL check at line 528: if (!sender || !data_out || !len_out) {, implies
that pointer _sender_ might be NULL.
Move pointer _sender_ dereference after NULL check in order to avoid a
potential NULL pointer dereference.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812015515.GA8360@embeddedgus
* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZlZ+SAAoJEPo9qoy8lh71x/8P/is/jIhTMCRi4kwH7pDN/eoG
Ie60ES9eovlN0Ld3HlTQWIT2s3y5zTJGdp1S2C+gbAubrOftnc51wv92p/3HxWZL
cnbnIPUvJIToF60l1+khy1V0AZdgIpaBgqLlqXx0DRhrAh9e6/fZYot5jjFDI1LW
ARMPkFP9S4nwOYx1uENTb6C61FaE+Q/D+tdYqSsbKP18h235UiTeqP5DAMUy+vE4
NR0fKUppQZugp/Nz0teVqHgP10WJJ8Tp878Zurxtb7ecrfdx5+Rm6r8e+yQ6pNty
ZkKQYxt+HEk8f1N6zWBrQFpREDNKRdFgeZpXmnfDG7qdt/DpE/SI/0Be7k/4hhdy
0LdjQHfvFeXHg3ZKiFqaGmSUc7GNv1ZTvTjHbpTyHn40Xfd8G5O4RHemEs9g92Mh
Fw+sUxW0nD1FutZai0VHTZKXyRHvvdQYRdgeluPeVUXdXcyxMq5tr/MUbRYlpYhY
FYTfyjEnarjZ/BHlokr/cT+odoCSdCorcNmjn56rRufMgavI/yh86fgZDzGMgSgp
vPaAS77FSU/vldEw/nJCZcXqsNi1xHqkwR1kqH8embvxhooW7njxTszfuXiGJhMJ
TkWUV36s1cWI83ajBqdj7uuLSfKvBZJUHsiqhd5UShk/JgiahrqN85K1fB5Fz8M3
AAXArAka4RktMeYyZVIs
=7wKU
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.14
* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)
* tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits)
drm/omap: Potential NULL deref in omap_crtc_duplicate_state()
drm/omap: remove no-op cleanup code
drm/omap: rename omapdrm device back
drm: omapdrm: Remove omapdrm platform data
ARM: OMAP2+: Don't register omapdss device for omapdrm
ARM: OMAP2+: Remove unused omapdrm platform device
drm: omapdrm: Remove the omapdss driver
drm: omapdrm: Register omapdrm platform device in omapdss driver
drm: omapdrm: hdmi: Don't allocate PHY features dynamically
drm: omapdrm: hdmi: Configure the PHY from the HDMI core version
drm: omapdrm: hdmi: Configure the PLL from the HDMI core version
drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio
drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version
drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix
drm/omap: add OMAP5 DSIPHY lane-enable support
drm/omap: use regmap_update_bit() when muxing DSI pads
drm: omapdrm: Remove dss_features.h
drm: omapdrm: Move supported outputs feature to dss driver
drm: omapdrm: Move DSS_FCK feature to dss driver
drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver
...
More features for 4.14. Nothing too major here. I have a few more additional
patches for large page support in vega10 among other things, but they require
some resevation object patches from drm-misc-next, so I'll send that request
once you've pulled the latest drm-misc-next. Highlights:
- Fixes for ACP audio on stoney
- SR-IOV fixes for vega10
- various powerplay fixes
- lots of code clean up
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits)
drm/amdgpu/gfx7: fix function name
drm/amd/amdgpu: Disabling Power Gating for Stoney platform
drm/amd/amdgpu: Added a quirk for Stoney platform
drm/amdgpu: jt_size was wrongly counted twice
drm/amdgpu: fix missing endian-safe guard
drm/amdgpu: ignore digest_size when loading sdma fw for raven
drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind()
drm/amd/powerplay: fix coding style in hwmgr.c
drm/amd/powerplay: refine dmesg info under powerplay.
drm/amdgpu: don't finish the ring if not initialized
drm/radeon: Fix preferred typo
drm/amdgpu: Fix preferred typo
drm/radeon: Fix stolen typo
drm/amdgpu: Fix stolen typo
drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c
drm/amdgpu: set gfx_v9_0_ip_funcs as static
drm/radeon: switch to drm_*{get,put} helpers
drm/amdgpu: switch to drm_*{get,put} helpers
drm/amd/powerplay: add CZ profile support
drm/amd/powerplay: fix PSI not enabled by kmd
...
UAPI Changes:
- vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric)
Cross-subsystem Changes:
- vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained
in staging
Core Changes:
- atomic_legacy_backoff is officially killed (Daniel)
- Extract drm_device.h (Daniel)
- Unregister drm device on unplug (Daniel)
- Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir)
Driver Changes:
- vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric)
- various: Make various drm_*_funcs structs const (Bhumika)
- tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David)
- various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Cihangir Akturk <cakturk@gmail.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
* tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits)
drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()
drm/virtio: Use the drm_driver.dumb_destroy default
drm/bochs: Use the drm_driver.dumb_destroy default
drm/mgag200: Use the drm_driver.dumb_destroy default
drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults
drm/msm: Use the drm_driver.dumb_destroy default
drm/ast: Use the drm_driver.dumb_destroy default
drm/qxl: Use the drm_driver.dumb_destroy default
drm/udl: Use the drm_driver.dumb_destroy default
drm/cirrus: Use the drm_driver.dumb_destroy default
drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults
drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults
drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults
drm/meson: Use .dumb_map_offset and .dumb_destroy defaults
drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults
drm/vc4: Continue the switch to drm_*_put() helpers
drm/vc4: Fix leak of HDMI EDID
dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2
dma-buf: add reservation_object_copy_fences (v2)
drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD
...
The function st7586_pipe_enable is local to the source
and does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'st7586_pipe_enable' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: David Lechner <david@lechnology.com>
[noralf: fixed: Alignment should match open parenthesis]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816092306.10969-1-colin.king@canonical.com
This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy()
which is the drm_driver.dumb_destroy default, so no need to set it.
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-19-git-send-email-noralf@tronnes.org
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and
remove exynos_drm_gem_dumb_map_offset().
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-14-git-send-email-noralf@tronnes.org
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-2-git-send-email-noralf@tronnes.org
If the kmalloc() fails then we dereference "state" when we set
"state->zpos".
Fixes: 3dfeb631a1 ("drm/omap: Rework the rotation-on-crtc hack")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver sets crtc and plane rotation properties back to 0 degrees in
dev_lastclose() using drm_object_property_set_value().
drm_object_property_set_value() doesn't do anything with atomic drivers,
and a recent change added WARN_ON() when atomic driver calls the
function.
So remove the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that creating the omapdrm device from the platform code has been
removed, we can rename the omapdrm device back to "omapdrm".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss driver (not to be confused with the omapdss_dss driver) is
now a dummy driver with empty probe and remove functions. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm platform device is a virtual device created for the sole
purpose of handling the omapdss/omapdrm driver split. It should
eventually be removed. As a first step to ease refactoring move its
registration from platform code to driver code.
The omapdrm driver name must be changed internally to avoid probing both
the device registered in platform code and the device registered in the
omapdss driver, as that would otherwise break bisection.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no need to allocate memory dynamically to duplicate the contents
of a const structure, only to store the memory pointer in a const
pointer field. Just use the original structures directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP4 and OMAP5 HDMI PHYs have different properties that require
specific handling in the HDMI PHY driver. This needs knowledge of the
PHY version, which is currently inferred from the DSS version. As part
of the effort to remove usage of the DSS version, use the HDMI
controller version instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP4 and OMAP5 PLLs have different properties that require specific
handling in the HDMI PLL driver. This needs knowledge of the PLL
version, which is currently inferred from the DSS version. AS part of
the effort to remove usage of the DSS version, use the HDMI controller
version instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI wrapper code only needs to differentiate between major OMAP
revisions, which can be obtained from the HDMI transmitter compatible
string. Replace the OMAP SoC model checks to prepare for removal of the
OMAP SoC version platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dsi_pll_ops structure and dsi_init_pll_data() function incorrectly
use a dsi_ prefix, likely due to copy & paste. Fix it by using the
correct hdmi_ prefix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are missing OMAP5 DSIPHY lane-enable support, which has prevented
OMAP5 DSI working in mainline. This patch adds the lane-enable similarly
to the recently added OMAP4 version.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Use regmap_update_bits instead of regmap_read/write, which simplifies
the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The most recent merge commit in airlied/drm-next has problems with
confusing old_crtc_state and new_crtc_state. Use the
for_each_oldnew_crtc_in_state macros to clean up the confusion,
and explicitly look at the correct state instead of looking at
asyh->state.
With these fixes it becomes more obvious what the code is trying to do,
which will hopefully prevent future confusion.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Was using the wrong prefix (gmc rather than gfx). The function
is related to the gfx hw, not gmc. This also makes it consistent
with the naming in gfx8.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power Gating is disabled in Stoney platform.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added DW_I2S_QUIRK_16BIT_IDX_OVERRIDE quirk for Stoney.
Supported format and bus width for I2S controller read
from I2S Component Parameter registers.
These are ready only registers.
For Stoney, I2S Component Parameter registers are programmed
to support 32 bit format and 4 bytes bus width only.
By setting this quirk,It will override 32 bit format with
16 bit format and 2 bytes as bus width for Stoney.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
digest_size has been retired from sdma v4 fw
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
My static checker complains that it's possible for "r" to be
uninitialized. It used to be set to zero so this returns it to the old
behavior.
Fixes: 98a7f88ce9 ("drm/amdgpu: bind BOs with GTT space allocated directly v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use pr_debug to prevent spamming unimportant dmesg.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
