These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes sure that on process termination, after
we're destroying all the active queues, we're killing all the
existing wave front of the current process.
By doing this we're making sure that if any of the CUs were blocked
by infinite loop we're enforcing it to end the shader explicitly.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds three new interfaces to kfd2kgd interface file of radeon.
The interfaces are:
- Check if a specific VMID has a valid PASID mapping
- Retrieve the PASID which is mapped to a specific VMID
- Issue a VMID invalidation request to the ATC
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The address watch operation gives the ability to specify watch points
which will generate a shader breakpoint, based on a specified single
address or range of addresses.
There is support for read/write/any access modes.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The wave control operation supports several command types executed upon
existing wave fronts that belong to the currently debugged process.
The available commands are:
HALT - Freeze wave front(s) execution
RESUME - Resume freezed wave front(s) execution
KILL - Kill existing wave front(s)
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the skeleton H/W debugger module support. This code
enables registration and unregistration of a single HSA process at a
time.
The module saves the process's pasid and use it to verify that only the
registered process is allowed to execute debugger operations through the
kernel driver.
v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds support for static user-mode queues in QCM.
Queues which are designated as static can NOT be preempted by
the CP microcode when it is executing its scheduling algorithm.
This is needed for supporting the debugger feature, because we
can't allow the CP to preempt queues which are currently being debugged.
The number of queues that can be designated as static is limited by the
number of HQDs (Hardware Queue Descriptors).
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W
debugger functionality to the userspace.
The IOCTLs are:
- AMDKFD_IOC_DBG_REGISTER:
The purpose of this IOCTL is to notify amdkfd that a process wants to use
GPU debugging facilities on itself only.
It is expected that this IOCTL would be called before any other H/W
debugger requests are sent to amdkfd and for each GPU where the H/W
debugging needs to be enabled. The use of this IOCTL ensures that only
one instance of a debugger is active in the system.
- AMDKFD_IOC_DBG_UNREGISTER:
This IOCTL detaches the debugger/debugged process from the H/W
Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL.
- AMDKFD_IOC_DBG_ADDRESS_WATCH:
This IOCTL allows to set different watchpoints with various conditions as
indicated by the IOCTL's arguments. The available number of watchpoints
is retrieved from topology. This operation is confined to the current
debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER.
- AMDKFD_IOC_DBG_WAVE_CONTROL:
This IOCTL allows to control a wavefront as indicated by the IOCTL's
arguments. For example, you can halt/resume or kill either a
single wavefront or a set of wavefronts. This operation is confined to
the current debugged process, which was registered through
AMDKFD_IOC_DBG_REGISTER.
Because the arguments for the address watch IOCTL and wave control IOCTL
are dynamic, meaning that they could vary in size, the userspace passes a
pointer to a structure (in userspace) that contains the value of the
arguments. The kernel driver is responsible to parse this structure and
validate its contents.
v2: change void* to uint64_t inside ioctl arguments
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds new interface functions to the kfd2kgd interface file. The
new functions allow to perform H/W debugger operations by writing to GPU
registers.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use the generic mechanism to declare a bitmap instead of unsigned long.
It seems that "struct kfd_process.allocated_queue_bitmap" is unused.
Maybe it could be deleted instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVWh3TAAoJEHm+PkMAQRiG/kwH/2c9irodp2+M9OUnX2bfsBb6
LnChiDpvkF5BB8jhP6d/XmvPp4NJzAbTxByhjdfb2E2HkorCUHCOIn2tI1TE2pUs
2qjkOVH+XCzoV0goGtQjzK1ht8f2IrtlDiEjyRekK5cJHzhggb22QPtWL4npyd0O
reDmG2jsRaF9POr9uLSFEv4CEnkksmRLUU0vuQX0TZeCJ41O7TXrkN/wKrLZ5mj4
IWpqXQaSlrffq/T5HnVbXBxk3/T8QmhrIoppiMpV1mUVj0uTqlFRNi5qwT2Nit1h
FVljWI4+WgOk3bf7fUlp+ahopjkTgu+GuXkiRP/pdgWNQO0cxCWSAzSndAlIIAE=
=uOoJ
-----END PGP SIGNATURE-----
Backmerge v4.1-rc4 into into drm-next
We picked up a silent conflict in amdkfd with drm-fixes and drm-next,
backmerge v4.1-rc5 and fix the conflicts
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/drm_irq.c
This patch adds a new kernel module parameter to amdkfd,
called send_sigterm.
This parameter specifies whether amdkfd should send the
SIGTERM signal to an HSA process, when the following conditions
occur:
1. The GPU triggers an exception regarding a kernel that was
issued by this process.
2. The HSA process isn't waiting on an event that handles
this exception.
The default behavior is not to send a SIGTERM and suffice
with a dmesg error print.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds Peripheral Page Request (PPR) failure processing
and reporting.
Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.
The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.
v3:
- Change all bool fields in struct kfd_memory_exception_failure to
uint32_t
Signed-off-by: Alexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).
The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.
The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.
v2:
Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap
v3:
Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
- AMDKFD_IOC_CREATE_EVENT:
Creates a new event of a specified type
- AMDKFD_IOC_DESTROY_EVENT:
Destroys an existing event
- AMDKFD_IOC_SET_EVENT:
Signal an existing event
- AMDKFD_IOC_RESET_EVENT:
Reset an existing event
- AMDKFD_IOC_WAIT_EVENTS:
Wait on event(s) until they are signaled
v2:
- Move the limit of the signal events to kfd_ioctl.h so it
can be used by userspace
v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.
The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.
This is done to make the code flow more logic, readable and maintainable.
The change is done only to the device queue manager module at this point.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
kmalloc() returns a void pointer - no need to cast it in
drivers/gpu/drm/amd/amdkfd/kfd_process.c::kfd_process_destroy_delayed()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a bug where sdma vm wasn't initialized when
an sdma queue was created in HWS mode.
This caused GPUVM faults to appear on dmesg and it is one of the
causes that SDMA queues are not working.
Signed-off-by: Xihan Zhang <xihan.zhang@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.comt>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets the local memory size that is reported to userspace to 0.
This is done to make sure that userspace won't try to allocate local memory
for HSA.
As long as amdkfd doesn't support allocating local memory for HSA,
we need this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes we might unregister process that have queues, because we couldn't
preempt the queues. Until now we blocked it with BUG_ON but instead just
print it as debug.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This backmerges 4.0-rc6 due to the recent fixes in rc5/6
- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)
* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
Linux 4.0-rc6
arm64: juno: Fix misleading name of UART reference clock
drm/i915: Update DRIVER_DATE to 20150327
drm/i915: Skip allocating shadow batch for 0-length batches
drm/i915: Handle error to get connector state when staging config
drm/i915: Compare GGTT view structs instead of types
drm/i915: fix simple_return.cocci warnings
drm/i915: Add module param to test the load detect code
drm/i915: Remove usage of encoder->new_crtc from clock computations
drm/i915: Don't look at staged config crtc when changing DRRS state
drm/i915: Convert intel_pipe_will_have_type() to using atomic state
drm/i915: Pass an atomic state to modeset_global_resources() functions
drm/i915: Add dynamic page trace events
drm/i915: Finish gen6/7 dynamic page table allocation
drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
drm/i915: Fix i915_dma_map_single positive error code
drm/i915: Prevent out of range pt in gen6_for_each_pde
drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
watchdog: imgpdc: Fix default heartbeat
...
The current code can only support one kgd instance. We have to
support multiple kgd instances in one system. i.e two amdgpu or two
radeon or one amdgpu + one radeon or more than two kgd instances.
Signed-off-by: Xihan Zhang <xihan.zhang@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Convert the timestamping in the amdkfd driver to use a timespec64 and 64bit
time accessors.
Although the existing code is completely safe beyond y2038 because it deals
with monotonic time, this patch is still needed in order to kill off all uses
of struct timespec.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
fence_wait_timeout() is an exported kernel symbol, so we should rename our
local function to something different.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the SDMA queue initialization, when running in non-HWS mode.
The first fix is to move the initialization of SDMA VM parameters before the
initialization of the SDMA MQD.
The second fix is to load the MQD to an HQD after the initialization of the MQD.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a missing destruction of mqd, when destroying a kernel queue.
Without the destruction, there is a memory leakage when repeatedly creating and
destroying kernel queues.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a
warning as BUG_ON() uses static variables when it is expanded.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a bug in the initialization of the pipelines. The
init_pipelines() function was called with a constant value of 0 in the
first_pipe argument. This is an error because amdkfd doesn't handle pipe 0.
The correct way is to pass the value that get_first_pipe() returns as the
argument for first_pipe.
This bug appeared in 3.19 (first version with amdkfd) and it causes around 15%
drop in CPU performance of Kaveri (A10-7850).
v2: Don't set get_first_pipe() as inline because it calls BUG_ON()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Pull drm updates from Dave Airlie:
"This is the main drm pull, it has a shared branch with some alsa
crossover but everything should be acked by relevant people.
New drivers:
- ATMEL HLCDC driver
- designware HDMI core support (used in multiple SoCs).
core:
- lots more atomic modesetting work, properties and atomic ioctl
(hidden under option)
- bridge rework allows support for Samsung exynos chromebooks to
work finally.
- some more panels supported
i915:
- atomic plane update support
- DSI uses shared DSI infrastructure
- Skylake basic support is all merged now
- component framework used for i915/snd-hda interactions
- write-combine cpu memory mappings
- engine init code refactored
- full ppgtt enabled where execlists are enabled.
- cherryview rps/gpu turbo and pipe CRC support.
radeon:
- indirect draw support for evergreen/cayman
- SMC and manual fan control for SI/CI
- Displayport audio support
amdkfd:
- SDMA usermode queue support
- replace suballocator usage with more suitable one
- rework for allowing interfacing to more than radeon
nouveau:
- major renaming in prep for later splitting work
- merge arm platform driver into nouveau
- GK20A reclocking support
msm:
- conversion to atomic modesetting
- YUV support for mdp4/5
- eDP support
- hw cursor for mdp5
tegra:
- conversion to atomic modesetting
- better suspend/resume support for child devices
rcar-du:
- interlaced support
imx:
- move to using dw_hdmi shared support
- mode_fixup support
sti:
- DVO support
- HDMI infoframe support
exynos:
- refactoring and cleanup, removed lots of internal unnecessary
abstraction
- exynos7 DECON display controller support
Along with the usual bunch of fixes, cleanups etc"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
drm/radeon: fix voltage setup on hawaii
drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
drm/radeon: only enable kv/kb dpm interrupts once v3
drm/radeon: workaround for CP HW bug on CIK
drm/radeon: Don't try to enable write-combining without PAT
drm/radeon: use 0-255 rather than 0-100 for pwm fan range
drm/i915: Clamp efficient frequency to valid range
drm/i915: Really ignore long HPD pulses on eDP
drm/exynos: Add DECON driver
drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
drm/i915: Insert a command barrier on BLT/BSD cache flushes
drm/i915: Drop vblank wait from intel_dp_link_down
drm/exynos: fix NULL pointer reference
drm/exynos: remove exynos_plane_dpms
drm/exynos: remove mode property of exynos crtc
drm/exynos: Remove exynos_plane_dpms() call with no effect
drm/i915: Squelch overzealous uncore reset WARN_ON
drm/i915: Take runtime pm reference on hangcheck_info
drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
...
This patch changes a BUG_ON() statement to pr_debug, in case the user tries to
update a non-existing queue.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a bug where the first_pipe index passed into init_pipelines()
was a #define instead of the value that is passed into amdkfd by radeon
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug when calling to init_pipeline() interface.
The index that was passed to that function didn't take into account the
first_pipe value, which represents the first pipe index that is under amdkfd's
responsibility.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
CP microcode uses undocumented bits in this register to record queue
state information. The KFD zeroes these bits in update_mqd, when invoked
through the UPDATE_QUEUE ioctl, causing incoherent state when the ioctl
is used to successively unmap and map a queue.
Since the queue type cannot be changed in this path, move the MQD write
to init_mqd.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
