move tls_make_aad as it is going to be reused
by the device offload code and rx path.
Remove unused recv parameter.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the TLS ulp context would leak if we attached a TLS ulp
to a socket but did not use the TLS_TX setsockopt,
or did use it but it failed.
This patch solves the issue by overriding prot[TLS_BASE_TX].close
and fixing tls_sk_proto_close to work properly
when its called with ctx->tx_conf == TLS_BASE_TX.
This patch also removes ctx->free_resources as we can use ctx->tx_conf
to obtain the relevant information.
Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx configuration is now stored in ctx->tx_conf.
And sk->sk_prot is updated trough a function
This will simplify things when we add rx
and support for different possible
tx and rx cross configurations.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kzalloc for aead_request allocation as
we don't set all the bits in the request.
Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song says:
====================
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics
This patch set intends to change verifier ARG_CONST_SIZE_OR_ZERO
semantics so that simpler bpf programs can be written with verifier
acceptance. Patch #1 comment provided the detailed examples and
the patch itself implements the new semantics. Patch #2
changes bpf_probe_read helper arg2 type from
ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO. Patch #3 fixed a few
test cases and added some for better coverage.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a few test cases to allow non-NULL map/packet/stack pointer
with size = 0. Change a few tests using bpf_probe_read to use
bpf_probe_write_user so ARG_CONST_SIZE arg can still be properly
tested. One existing test case already covers size = 0 with non-NULL
packet pointer, so add additional tests so all cases of
size = 0 and 0 <= size <= legal_upper_bound with non-NULL
map/packet/stack pointer are covered.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The helper bpf_probe_read arg2 type is changed
from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO to permit
size-0 buffer. Together with newer ARG_CONST_SIZE_OR_ZERO
semantics which allows non-NULL buffer with size 0,
this allows simpler bpf programs with verifier acceptance.
The previous commit which changes ARG_CONST_SIZE_OR_ZERO semantics
has details on examples.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the
access size to be 0 when accessing the previous argument (arg).
Right now, it requires the arg needs to be NULL when size passed
is 0 or could be 0. It also requires a non-NULL arg when the size
is proved to be non-0.
This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior
such that for size-0 or possible size-0, it is not required
the arg equal to NULL.
There are a couple of reasons for this semantics change, and
all of them intends to simplify user bpf programs which
may improve user experience and/or increase chances of
verifier acceptance. Together with the next patch which
changes bpf_probe_read arg2 type from ARG_CONST_SIZE to
ARG_CONST_SIZE_OR_ZERO, the following two examples, which
fail the verifier currently, are able to get verifier acceptance.
Example 1:
unsigned long len = pend - pstart;
len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len;
len &= MAX_PAYLOAD_LEN;
bpf_probe_read(data->payload, len, pstart);
It does not have test for "len > 0" and it failed the verifier.
Users may not be aware that they have to add this test.
Converting the bpf_probe_read helper to have
ARG_CONST_SIZE_OR_ZERO helps the above code get
verifier acceptance.
Example 2:
Here is one example where llvm "messed up" the code and
the verifier fails.
......
unsigned long len = pend - pstart;
if (len > 0 && len <= MAX_PAYLOAD_LEN)
bpf_probe_read(data->payload, len, pstart);
......
The compiler generates the following code and verifier fails:
......
39: (79) r2 = *(u64 *)(r10 -16)
40: (1f) r2 -= r8
41: (bf) r1 = r2
42: (07) r1 += -1
43: (25) if r1 > 0xffe goto pc+3
R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff))
R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0)
R8=inv(id=0) R9=inv0 R10=fp0
44: (bf) r1 = r6
45: (bf) r3 = r8
46: (85) call bpf_probe_read#45
R2 min value is negative, either use unsigned or 'var &= const'
......
The compiler optimization is correct. If r1 = 0,
r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap.
r1 > 0xffe at insn #43 can actually capture
both "r1 > 0" and "len <= MAX_PAYLOAD_LEN".
This however causes an issue in verifier as the value range of arg2
"r2" does not properly get refined and lead to verification failure.
Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO
allows the following simplied code:
unsigned long len = pend - pstart;
if (len <= MAX_PAYLOAD_LEN)
bpf_probe_read(data->payload, len, pstart);
The llvm compiler will generate less complex code and the
verifier is able to verify that the program is okay.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I had many reports that TSQ logic breaks wifi aggregation.
Current logic is to allow up to 1 ms of bytes to be queued into qdisc
and drivers queues.
But Wifi aggregation needs a bigger budget to allow bigger rates to
be discovered by various TCP Congestion Controls algorithms.
This patch adds an extra socket field, allowing wifi drivers to select
another log scale to derive TCP Small Queue credit from current pacing
rate.
Initial value is 10, meaning that this patch does not change current
behavior.
We expect wifi drivers to set this field to smaller values (tests have
been done with values from 6 to 9)
They would have to use following template :
if (skb->sk && skb->sk->sk_pacing_shift != MY_PACING_SHIFT)
skb->sk->sk_pacing_shift = MY_PACING_SHIFT;
Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670041
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Kir Kolyshkin <kir@openvz.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=MYda
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20171111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are some patches that fix some things in AF_RXRPC:
(1) Prevent notifications from being passed to a kernel service for a call
that it has ended.
(2) Fix a null pointer deference that occurs under some circumstances when an
ACK is generated.
(3) Fix a number of things to do with call expiration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When "NETDEV WATCHDOG: em4 (bnx2x): transmit queue 2 timed out" occurs,
BNX2X_SP_RTNL_TX_TIMEOUT is set. In the function bnx2x_sp_rtnl_task,
bnx2x_nic_unload and bnx2x_nic_load are executed to shutdown and open
NIC. In the function bnx2x_nic_load, bnx2x_alloc_mem allocates dma
failure. The message "bnx2x: [bnx2x_alloc_mem:8399(em4)]Can't
allocate memory" pops out. The variable slowpath is set to NULL.
When shutdown the NIC, the function bnx2x_nic_unload is called. In
the function bnx2x_nic_unload, the following functions are executed.
bnx2x_chip_cleanup
bnx2x_set_storm_rx_mode
bnx2x_set_q_rx_mode
bnx2x_set_q_rx_mode
bnx2x_config_rx_mode
bnx2x_set_rx_mode_e2
In the function bnx2x_set_rx_mode_e2, the variable slowpath is operated.
Then the crash occurs.
To fix this crash, the variable slowpath is checked. And in the function
bnx2x_sp_rtnl_task, after dma memory allocation fails, another shutdown
and open NIC is executed.
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Ariel Elior <aelior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f1fb08f633 ("vxlan: fix ND proxy when skb doesn't have transport
header offset") removed icmp6_code and icmp6_type check before calling
neigh_reduce when doing neigh proxy.
It means all icmpv6 packets would be blocked by this, not only ns packet.
In Jianlin's env, even ping6 couldn't work through it.
This patch is to bring the icmp6_code and icmp6_type check back and also
removed the same check from neigh_reduce().
Fixes: f1fb08f633 ("vxlan: fix ND proxy when skb doesn't have transport header offset")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that spi_byaddr and spi_byspi arrays initialized in net_init hook
were return to initial state
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that lists initialized in net_init hook were return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that pndevs.list initialized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that l2tp_session_hlist array initialized in net_init hook
was return to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that rules_ops list initialized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that fib_notifier_ops list initilized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that dev_base_head list initialized in net_init hook was return
to initial state
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that sock_list array initialized in net_init hook was return
to initial state
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that packet.sklist initialized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure that sock_list initialized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA now uses one of the symbols exported by the bridge,
br_vlan_enabled(). This has a stub, if the bridge is not
enabled. However, if the bridge is enabled, we cannot have DSA built
in and the bridge as a module, otherwise we get undefined symbols at
link time:
net/dsa/port.o: In function `dsa_port_vlan_add':
net/dsa/port.c:255: undefined reference to `br_vlan_enabled'
net/dsa/port.o: In function `dsa_port_vlan_del':
net/dsa/port.c:270: undefined reference to `br_vlan_enabled'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
net: improve the process of redirect and toobig for ipv6 tunnels
Now let's say there are 3 kinds of icmp packets to process for tunnels,
toobig(needfrag), redirect, others, their process should be:
- toobig(needfrag)
update the lower dst's pmtu by route cache, also update sk dst's pmtu
if possible, or it will be fine if sk dst pmtu will get updated on tx
path.
- redirect
update the lower dst's gw by route cache and return, no need to send
this redirect packet to user sk.
- others
send the packet to user's sk, or it will also be fine to use err_count
to count it and report fail link on tx path.
All ipv4 tunnels basically follow this while some of ipv6 tunnels are
doing in different ways, like ip6gre and ip6_tunnels update tnl dev's
mtu instead of updating lower dst pmtu, no redirect process on their
err_handlers, which doesn't make any sense and even causes performance
problems.
This patchset is to improve the process of redirect and toobig for ip6gre
ip4ip6, ip6ip6 tunnels, as in ipv4 tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to remove some useless codes of redirect and fix some
indents on ip4ip6 and ip6ip6's err_handlers.
Note that redirect icmp packet is already processed in ip6_tnl_err,
the old redirect codes in ip4ip6_err actually never worked even
before this patch. Besides, there's no need to send redirect to
user's sk, it's for lower dst, so just remove it in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same improvement in "ip6_gre: process toobig in a better way"
is needed by ip4ip6 and ip6ip6 as well.
Note that ip4ip6 and ip6ip6 will also update sk dst pmtu in their
err_handlers. Like I said before, gre6 could not do this as it's
inner proto is not certain. But for all of them, sk dst pmtu will
be updated in tx path if in need.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same process for redirect in "ip6_gre: add the process for redirect
in ip6gre_err" is needed by ip4ip6 and ip6ip6 as well.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now ip6gre processes toobig icmp packet by setting gre dev's mtu in
ip6gre_err, which would cause few things not good:
- It couldn't set mtu with dev_set_mtu due to it's not in user context,
which causes route cache and idev->cnf.mtu6 not to be updated.
- It has to update sk dst pmtu in tx path according to gredev->mtu for
ip6gre, while it updates pmtu again according to lower dst pmtu in
ip6_tnl_xmit.
- To change dev->mtu by toobig icmp packet is not a good idea, it should
only work on pmtu.
This patch is to process toobig by updating the lower dst's pmtu, as later
sk dst pmtu will be updated in ip6_tnl_xmit, the same way as in ip4gre.
Note that gre dev's mtu will not be updated any more, it doesn't make any
sense to change dev's mtu after receiving a toobig packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add redirect icmp packet process for ip6gre by
calling ip6_redirect() in ip6gre_err(), as in vti6_err.
Prior to this patch, there's even no route cache generated after
receiving redirect.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In xmit process, the variables are set many times. In fact,
it is enough for these variables to be set once.
After a long time test, the throughput performance is better
than before.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the NFC pull request for 4.15. We have:
- A new netlink command for explicitly deactivating NFC targets
- i2c constification for all NFC drivers
- One NFC device allocation error path fix
-----BEGIN PGP SIGNATURE-----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=Oql5
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.15 pull request
This is the NFC pull request for 4.15. We have:
- A new netlink command for explicitly deactivating NFC targets
- i2c constification for all NFC drivers
- One NFC device allocation error path fix
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Zhou says:
====================
Openvswitch meter action
This patch series is the first attempt to add openvswitch
meter support. We have previously experimented with adding
metering support in nftables. However 1) It was not clear
how to expose a named nftables object cleanly, and 2)
the logic that implements metering is quite small, < 100 lines
of code.
With those two observations, it seems cleaner to add meter
support in the openvswitch module directly.
---
v1(RFC)->v2: remove unused code improve locking
and other review comments
v2 -> v3: rebase
v3 -> v4: fix undefined "__udivdi3" references on 32 bit builds.
use div_u64() instead.
v4 -> v5: rebase
====================
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
OVS kernel datapath so far does not support Openflow meter action.
This is the first stab at adding kernel datapath meter support.
This implementation supports only drop band type.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later patches will invoke get_dp() outside of datapath.c. Export it.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Meter has its own netlink family. Define netlink messages and attributes
for communicating with the user space programs.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: dsa: b53: Support prepended Broadcom tags
This patch series adds support for prepended 4-bytes Broadcom tags that we
already support. This type of tag will typically be used when interfaced to
a SoC like BCM58xx (NorthStar Plus) which supports a Flow Accelerator (WIP).
In that case, we need to support a slightly different tagging format.
The first patch does a bit of re-factoring and passes a port index to
the get_tag_protocol() function since at least two different drivers need
that type of information (mt7530, b53) to support tagging or not.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On BCM58xx devices (Northstar Plus), there is an accelerator attached to
port 8 which would only work if we use prepended Broadcom tags. Resolve
that difference in our get_tag_protocol() function by setting the
appropriate tagging protocol in that case. We need to change
b53_brcm_hdr_setup() a little bit now since we can deal with two types
of Broadcom tags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the
4-bytes Broadcom tag that we already support, but in a format where it
is pre-pended to the packet instead of located between the MAC SA and
the Ethertyper (DSA_TAG_PROTO_BRCM).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for supporting the same Broadcom tag format, but instead
of inserted between the MAC SA and EtherType, prepended to the Ethernet
frame, restructure the code a little bit to make that possible and take
an offset parameter.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of drivers want to check whether the configured CPU port is a
possible configuration for enabling tagging, pass down the CPU port
number so they verify that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-4.4.4 (at lest) has issues with initializers and anonymous unions:
net/sched/sch_red.c: In function 'red_dump_offload':
net/sched/sch_red.c:282: error: unknown field 'stats' specified in initializer
net/sched/sch_red.c:282: warning: initialization makes integer from pointer without a cast
net/sched/sch_red.c:283: error: unknown field 'stats' specified in initializer
net/sched/sch_red.c:283: warning: initialization makes integer from pointer without a cast
net/sched/sch_red.c: In function 'red_dump_stats':
net/sched/sch_red.c:352: error: unknown field 'xstats' specified in initializer
net/sched/sch_red.c:352: warning: initialization makes integer from pointer without a cast
Work around this.
Fixes: 602f3baf22 ("net_sch: red: Add offload ability to RED qdisc")
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since Mellanox focus is on newer adapters, we would like to have the
ability to disable the support for old gen2 adapters.
This can be done by turning off the MLX4_CORE_GEN2 Kconfig flag.
We keep it turned on by default.
Signed-off-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The way people generally use netlink_dump is that they fill in the skb
as much as possible, breaking when nla_put returns an error. Then, they
get called again and start filling out the next skb, and again, and so
forth. The mechanism at work here is the ability for the iterative
dumping function to detect when the skb is filled up and not fill it
past the brim, waiting for a fresh skb for the rest of the data.
However, if the attributes are small and nicely packed, it is possible
that a dump callback function successfully fills in attributes until the
skb is of size 4080 (libmnl's default page-sized receive buffer size).
The dump function completes, satisfied, and then, if it happens to be
that this is actually the last skb, and no further ones are to be sent,
then netlink_dump will add on the NLMSG_DONE part:
nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI);
It is very important that netlink_dump does this, of course. However, in
this example, that call to nlmsg_put_answer will fail, because the
previous filling by the dump function did not leave it enough room. And
how could it possibly have done so? All of the nla_put variety of
functions simply check to see if the skb has enough tailroom,
independent of the context it is in.
In order to keep the important assumptions of all netlink dump users, it
is therefore important to give them an skb that has this end part of the
tail already reserved, so that the call to nlmsg_put_answer does not
fail. Otherwise, library authors are forced to find some bizarre sized
receive buffer that has a large modulo relative to the common sizes of
messages received, which is ugly and buggy.
This patch thus saves the NLMSG_DONE for an additional message, for the
case that things are dangerously close to the brim. This requires
keeping track of the errno from ->dump() across calls.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Taht says:
====================
netem: add nsec scheduling and slot feature
This patch series converts netem away from the old "ticks" interface and
userspace API, and adds support for a new "slot" feature intended to
emulate bursty macs such as WiFi and LTE better.
Changes since v2:
Use u64 for packet_len_sched_time()
Use simpler max(time_to_send,q->slot.slot_next)
Changes since v1:
Always pass new nanosecond APIs to userspace
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Slotting is a crude approximation of the behaviors of shared media such
as cable, wifi, and LTE, which gather up a bunch of packets within a
varying delay window and deliver them, relative to that, nearly all at
once.
It works within the existing loss, duplication, jitter and delay
parameters of netem. Some amount of inherent latency must be specified,
regardless.
The new "slot" parameter specifies a minimum and maximum delay between
transmission attempts.
The "bytes" and "packets" parameters can be used to limit the amount of
information transferred per slot.
Examples of use:
tc qdisc add dev eth0 root netem delay 200us \
slot 800us 10ms bytes 64k packets 42
A more correct example, using stacked netem instances and a packet limit
to emulate a tail drop wifi queue with slots and variable packet
delivery, with a 200Mbit isochronous underlying rate, and 20ms path
delay:
tc qdisc add dev eth0 root handle 1: netem delay 20ms rate 200mbit \
limit 10000
tc qdisc add dev eth0 parent 1:1 handle 10:1 netem delay 200us \
slot 800us 10ms bytes 64k packets 42 limit 512
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
