The render state is used to initialise the default RCS context, and only
used during early setup from within the gt code. As such, it makes a
good candidate for placing within gt/, even if it is not yet entirely
clean of our GEM heritage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704091925.7391-1-chris@chris-wilson.co.uk
If we hit an error while allocating the page tables, we have to unwind
the incomplete updates, and wish to free the unused pd. However, we are
not allowed to be hoding the spinlock at that point, and so must use the
later free to defer it until after we drop the lock.
<3> [414.363795] BUG: sleeping function called from invalid context at drivers/gpu/drm/i915/i915_gem_gtt.c:472
<3> [414.364167] in_atomic(): 1, irqs_disabled(): 0, pid: 3905, name: i915_selftest
<4> [414.364406] 3 locks held by i915_selftest/3905:
<4> [414.364408] #0: 0000000034fe8aa8 (&dev->mutex){....}, at: device_driver_attach+0x18/0x50
<4> [414.364415] #1: 000000006bd8a560 (&dev->struct_mutex){+.+.}, at: igt_ctx_exec+0xb7/0x410 [i915]
<4> [414.364476] #2: 000000003dfdc766 (&(&pd->lock)->rlock){+.+.}, at: gen8_ppgtt_alloc_pdp+0x448/0x540 [i915]
<3> [414.364529] Preemption disabled at:
<4> [414.364530] [<0000000000000000>] 0x0
<4> [414.364696] CPU: 0 PID: 3905 Comm: i915_selftest Tainted: G U 5.2.0-rc7-CI-CI_DRM_6403+ #1
<4> [414.364698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
<4> [414.364699] Call Trace:
<4> [414.364704] dump_stack+0x67/0x9b
<4> [414.364708] ___might_sleep+0x167/0x250
<4> [414.364777] vm_free_page+0x24/0xc0 [i915]
<4> [414.364852] free_pd+0xf/0x20 [i915]
<4> [414.364897] gen8_ppgtt_alloc_pdp+0x489/0x540 [i915]
<4> [414.364946] gen8_ppgtt_alloc_4lvl+0x8e/0x2e0 [i915]
<4> [414.364992] ppgtt_bind_vma+0x2e/0x60 [i915]
<4> [414.365039] i915_vma_bind+0xe8/0x2c0 [i915]
<4> [414.365088] __i915_vma_do_pin+0xa1/0xd20 [i915]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050
Fixes: 1d1b5490b9 ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk
Adding N & CTS values for 10/12 bit deep color from Appendix C
table in HDMI 2.0 spec. The correct values for N is not chosen
automatically by hardware for deep color modes.
v2: Remove unnecessary initialization of size
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-2-aditya.swarup@intel.com
Use port_clock to check the clock values in n/cts lookup table instead
of crtc_clock. As port_clock is already adjusted based on color mode set
(8 bit or deep color), this will help in checking clock values for deep
color modes from n/cts lookup table.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-1-aditya.swarup@intel.com
When SAGV is forced to disabled/min/med/max in the BIOS pcode will
only hand us a single QGV point instead of the normal three. Fix
the code to deal with that instead declaring the bandwidth limit
to be 0 MB/s (and thus preventing any planes from being enabled).
Also shrink the max_bw sturct a bit while at it, and change the
deratedbw type to unsigned since the code returns the bw as
an unsigned int.
Since we now keep track of how many qgv points we got from pcode
we can drop the earlier check added for the "pcode doesn't
support the memory subsystem query" case.
Cc: felix.j.degrood@intel.com
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Fixes: c457d9cf25 ("drm/i915: Make sure we have enough memory bandwidth on ICL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110838
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606124210.3482-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Since a shrinker may be forced to wait on GPU activity,
i915_active_wait(&vma->active) must be safe for use inside a shrinker,
and so let's mark up the lock as being acquired by the shrinker to avoid
any nasty surprises creeping in.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-8-chris@chris-wilson.co.uk
As we have dropped the final reference to the object, we do not need to
wait until after the rcu grace period to drop its pages. We still require
struct_mutex to completely unbind the object to release the pages, so we
still need a free-worker to manage that from process context. By
scheduling the release of pages before waiting for the rcu should mean
that we are not trapping those pages from beyond the reach of the
shrinker.
v2: Pass along the request to skip if the vma is busy to the underlying
unbind routine, to avoid checking the reservation underneath the
i915->mm.obj_lock which may be used from inside irq context.
v3: Flip the bit for unbinding while active, for later convenience.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111035
Fixes: a93615f900 ("drm/i915: Throw away the active object retirement complexity")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-6-chris@chris-wilson.co.uk
Be a little more hesitant before injecting a timeslice, and try to take
into account any change in priority that is due for the running task
before switching to another task. This will allow us to arbitrarily
prevent switching away from a request if we deem it necessarily to
disable preemption, for instance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-9-chris@chris-wilson.co.uk
We frequently, but not frequently enough!, remember to flush residual
operations and objects at the end of a live subtest. The purpose is to
cleanup after every subtest, leaving a clean slate for the next subtest,
and perform early detection of leaky state. As this should ideally be
common for all live subtests, pull the task into a common teardown
routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-1-chris@chris-wilson.co.uk
icl-dsi is dying on suspend/resume at
RIP: 0010:icl_update_active_dpll+0x2c/0xa0 [i915]
which appears due to the loss of the time primary_port across suspend.
Protect against the potential NULL dereference by assuming
ICL_PORT_DPLL_DEFAULT unless the port is actively specified otherwise.
Fixes: 24a7bfe0c2 ("drm/i915: Keep the TypeC port mode fixed when the port is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702140950.7069-1-chris@chris-wilson.co.uk
When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.
v2: Add intel_syncrhonize_irq() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: b318b82455 ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
We missed one place where we check PPGTT-only platform for PPGTT
presence. Let's remove it.
While I'm here let's assert that this particular code is never called on
pre-gen8 platforms.
References: 4bdafb9ddf ("drm/i915: Remove i915.enable_ppgtt override")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702113149.21200-2-michal.winiarski@intel.com
This reverts commit 4395890a48.
It's been over a year since this was merged, and the actual users of
intel_ppat_get / intel_ppat_put never materialized.
Time to remove it!
v2: Unbreak suspend (Chris)
v3: Rebase, drop fixes tag to avoid confusion
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702113149.21200-1-michal.winiarski@intel.com
If we untrack wakerefs, the actual count may reach zero.
However the krealloced owners array is still there and
needs to be taken care of. Free the owners unconditionally
to fix the leak.
Fixes: bd780f37a3 ("drm/i915: Track all held rpm wakerefs")
Reported-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701104442.9319-1-mika.kuoppala@linux.intel.com
The same tests failing on CFL+ platforms are also failing on ICL.
Documentation doesn't list the
WaAllowPMDepthAndInvocationCountAccessFromUMD workaround for ICL but
applying it fixes the same tests as CFL.
v2: Use only one whitelist entry (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-4-lionel.g.landwerlin@intel.com
CFL:C0+ changed the status of those registers which are now
blacklisted by default.
This is breaking a number of CTS tests on GL & Vulkan :
KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations (GL)
dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.* (Vulkan)
v2: Only use one whitelist entry (Lionel)
Bspec: 14091
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-3-lionel.g.landwerlin@intel.com
When a register is readonly there is not much we can tell about its
value (apart from its default value?). This can be covered by tests
exercising the value of the register from userspace.
For PS_INVOCATION_COUNT we've got the following piglit tests :
KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations
Vulkan CTS tests :
dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.*
v2: Use a local to shrink under 80cols.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 86554f48e5 ("drm/i915/selftests: Verify whitelist of context registers")
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190629131350.31185-1-chris@chris-wilson.co.uk
If we try to wait on an i915_active from within a critical section, it
will remain busy (such as if we are shrinking from within
i915_active_ref). Report the failure so that we do not proceed thinking
it is idle.
Extracted from a future patch "drm/i915: Coordinate i915_active with its
own mutex".
Fixes: 12c255b5da ("drm/i915: Provide an i915_active.acquire callback")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702092117.1707-1-chris@chris-wilson.co.uk
Daniele pointed out that the CSB status information will change with
Tigerlake and suggested that we could rearrange our state machine to
hide the differences in generation. gcc also prefers the explicit state
machine, so make it so:
process_csb 1980 1967 -13
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701100502.15639-4-chris@chris-wilson.co.uk
Although EHL added a third combo PHY, no PHY_MISC register was added for
PHY C. The bspec indicates that there's no need to program the "DE to
IO Comp Pwr Down" setting for this PHY that we usually need to set in
PHY_MISC.
v2:
- Add IS_ELKHARTLAKE() guards since future platforms that have a PHY C
are likely to reinstate the PHY_MISC register. (Jose)
- Use goto's to skip PHY_MISC programming & minimize code deltas. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626000352.31926-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The port parameter hasn't been used since the last bspec phy programming
update. Drop it to make some upcoming changes simpler.
References: 9659c1af45 ("drm/i915/icl: combo port vswing programming changes per BSPEC")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626000352.31926-2-matthew.d.roper@intel.com
During reset, we must be very selective in which locks we take as most
are tainted by being held across a wait or reclaim (kmalloc) which
implicitly waits. Inside the guc reset path, we reset the ADS to sane
defaults, but must keep it pinned from initialisation to avoid having to
pin it during reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701100502.15639-1-chris@chris-wilson.co.uk
Lane reversal happens only in the FIA module for TBT-alt/DP-alt mode, so
WARN if lane reversal is attempted at a different level. See the
BSpec DDI_BUF_CTL register description.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-24-imre.deak@intel.com
Disconnecting the TypeC PHY when the port is in legacy mode is not
necessary:
- BSpec doesn't specify a disconnect sequence for legacy mode.
- The use of the PHY is dedicated for the display in legacy mode.
- We keep the PHY always connected during runtime as well in legacy
mode.
We disconnect the PHY when needed during a disabling modeset for the
port, so we can also remove the disconnect call from the destroy hook.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-23-imre.deak@intel.com
Add state verification for the TypeC port mode wrt. the port's AUX power
well enabling/disabling. Also check the correctness of changing the port
mode:
- When enabling/disabling the AUX power well for a TypeC port we must hold
the TypeC port lock - the case for AUX transfers - or hold a Type C
port link reference - the case for modeset enabling/disabling.
- When changing the TypeC port mode the port's AUX power domain must be
disabled.
v2: (Ville)
- Simplify power_well_async_ref_count().
- Fix the commit log, clarifying what are the valid conditions to
enable/disable the AUX power wells.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-22-imre.deak@intel.com
The TypeC port mode needs to stay fixed whenever the port is active. Do
that by introducing a tc_link_refcount to account for active ports,
avoiding changing the port mode if a reference is held.
During the modeset commit phase we also have to reset the port mode and
update the active PLL reflecting the new port mode. We can do this only
once the port and its old PLL has been already disabled. Add the new
encoder update_prepare/complete hooks that are called around the whole
enabling sequence. The TypeC specific hooks of these will reset the port
mode, update the active PLL if the port will be active and ensure that
the port mode will stay fixed for the duration of the whole enabling
sequence by holding a tc_link_refcount.
During the port enabling, the pre_pll_enable/post_pll_disable hooks will
take/release a tc_link_refcount to ensure the port mode stays fixed
while the port is active.
Changing the port mode should also be avoided during connector detection
and AUX transfers if the port is active, we'll do that by checking the
port's tc_link_refcount.
When resetting the port mode we also have to take into account the
maximum lanes provided by the FIA. It's guaranteed to be 4 in TBT-alt
and legacy modes, but there may be less lanes available in DP-alt mode,
in which case we have to fall back to TBT-alt mode.
While at it also update icl_tc_phy_connect()'s code comment, reflecting
the current way of switching the port mode.
v2:
- Add the update_prepare/complete hooks to the encoder instead of the
connector. (Ville)
- Simplify intel_connector_needs_modeset() by removing redundant if.
(Ville)
v3:
- Fix sparse warning, marking static functions as such.
v4:
- Rebase on drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-21-imre.deak@intel.com
When enabling a TypeC port we need to reserve all the required PLLs for
it, the TBT PLL for TBT-alt and the MG PHY PLL for DP-alt/legacy sinks.
We can select the proper PLL for the current port mode from the reserved
PLLs only once we selected and locked down the port mode for the whole
duration of the port's active state. Resetting and locking down the port
mode can in turn happen only during the modeset commit phase once we
disabled the given port and the PLL it used.
To support the above reserve-and-select PLL semantic we store the
reserved PLLs along with their HW state in the CRTC state and provide a
way to select the active PLL from these. The selected PLL along with its
HW state will be pointed at by crtc_state->shared_dpll/dpll_hw_state as
in the case of other port types.
Besides reserving all required PLLs no functional changes.
v2:
- Fix releasing the ICL PLLs, not clearing the PLLs from the old
crtc_state.
- Init port_dpll to ICL_PORT_DPLL_DEFAULT closer to where port_dpll is
used for symmetry with the corresponding ICL_PORT_DPLL_MG_PHY init.
(Ville)
v3:
- Add FIXME: for clearing the ICL port PLLs from the new crtc state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-20-imre.deak@intel.com
For clarity factor out the combo PHY and TypeC PHY specific code from
icl_get_dplls() into their own functions.
No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-19-imre.deak@intel.com
Pass the PLL HW state to the PLL find/reference functions making it
clearer what is their input. Also pass to these the atomic state and the
CRTC object instead of the CRTC state, since they don't require the
latter.
Move setting the PLL in the crtc_state to the get_dpll() hook, which
is the more logical place for this, where the related PLL HW state was also
set.
This refactoring is also a preparation for a follow-up patch that will
have to find/reference multiple PLLs.
No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-18-imre.deak@intel.com
For consistency s/intel_get_shared_dpll()/intel_reserve_shared_dplls()/
to better match intel_release_shared_dplls(). Also, pass to the
reserve/release and get_dplls/put_dplls hooks the intel_atomic_state and
CRTC object, that way these functions can look up the old or new state
as needed.
Also release the PLLs from the atomic state via a new
put_dplls->intel_unreference_shared_dpll() call chain for better
symmetry with the reservation via the
get_dplls->intel_reference_shared_dpll() call chain.
Since nothing uses the PLL returned by intel_reserve_shared_dplls(),
make it return only a bool.
While at it also clarify the reserve/release function docbook headers
making it clear that multiple DPLLs will be reserved/released and
whether the new or old atomic CRTC state is affected.
This refactoring is also a preparation for a follow-up change that needs
to reserve multiple DPLLs.
Kudos to Ville for the idea to pass intel_atomic_state around, to make
things clearer locally where an object's old/new atomic state is
required.
No functional changes.
v2:
- Fix checkpatch issue: typo in code comment.
v3:
- Rebase on drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-17-imre.deak@intel.com
Use hex numbers, since that makes more sense when decoding a bit pattern.
No functional change.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-16-imre.deak@intel.com
We must keep the TypeC port mode fixed for the duration of the connector
detection and each AUX transfers. Add a new TypeC lock holding it around
these two sequences. For consistency also hold the lock during the port
mode sanitization.
Whenever resetting the port mode (only during the detection for now) the
port's AUX power domain must be disabled already. Flush the async power
domain disabling work to ensure this.
A follow-up patch will make the port mode changing more robust by
postponing the change for active ports.
v2:
- Fix checkpatch issue: missing annotation for tc_lock.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-15-imre.deak@intel.com
For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).
We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Detect TCCOLD any time PORT_TX_DFLEXDPCSSS is read. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-14-imre.deak@intel.com
Make the order during detection more consistent: first reset the TypeC
port mode if needed (adding new helpers for this), then detect any
connected sink.
To check if a port mode reset is needed determine first the target port
mode based on the live status if a sink is already connected or the
PHY status complete flag otherwise.
Add a WARN in legacy mode if unexpectedly we can't set the unsafe mode
or if the FIA doesn't provide the 4 lanes required.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-13-imre.deak@intel.com
Based on a recent BSpec update (Index/21750) we must handle the TCCOLD
event associated with the DP-alt mode. We can detect this event by
reading an invalid all-1s value from FIA registers.
After detecting TCCOLD we will:
- fall back to TBT-alt mode when attempting to switch to DP-alt mode
- conclude that nothing is connected during live status detection
- WARN when already in unsafe mode, since then TCCOLD is unexpected
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Use 0xffffffff instead of -1 as invalid FIA reg value.
(José, Ville)
- Check for TCCOLD in icl_tc_phy_status_complete() too. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-12-imre.deak@intel.com
The PHY status complete flag normally clears when disconnecting the PHY
in DP-alt mode (achieved by switching to safe mode), so wait for the
flag to clear.
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-11-imre.deak@intel.com
Factor out helpers reading/parsing the TypeC specific registers, making
current users of them clearer and letting us use them later.
While at it also:
- Simplify icl_tc_phy_connect() with an early return in legacy mode.
- Simplify the live status check using one bitmask for all HPD bits.
- Remove a micro-optimisation of the repeated safe-mode clearing.
- Make sure we fix the legacy port flag in all cases.
Except for the last two, no functional changes.
v2:
- Don't do reg reads at variable declarations. (Jani)
- Prevent constant truncated compiler warning when assigning the
valid_hpd_mask. (Nick)
- s/intel_tc_port_get_lane_info/intel_tc_port_get_lane_mask/ (Ville)
v3:
- Make valid_hpd_mask init clear. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-10-imre.deak@intel.com
Unify the TypeC port notation in log messages, so that it matches the
spec. For instance the first ICL TypeC port will read as 'Port C/TC#1'.
v2:
- Format print the name only once. (José)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-9-imre.deak@intel.com
In the TypeC TBT-alt port mode we must use the TBT AUX power domain,
fix that.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-8-imre.deak@intel.com
Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.
Fixes: c7375d9542 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com
According to the spec we should not enable the DDI-IO power domain if
the TypeC port is in the TBT-alt mode, so do that only in the other
TypeC modes or for non-TypeC ports. See the internal BSpec Index/22243.
v2:
- Add the internal BSpec reference to the log message. (José)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-6-imre.deak@intel.com
The TypeC port mode can switch dynamically, to reflect that better call
the port's mode as 'mode' rather than 'type'.
While at it:
- s/TC_PORT_TBT/TC_PORT_TBT_ALT/ and s/TC_PORT_TYPEC/TC_PORT_DP_ALT/.
'TYPEC' is ambiguous, TBT_ALT and DP_ALT better match the reality.
- Remove the 'unknown' TypeC port mode. The mode is always known, it's
the TBT-alt/safe mode after HW reset and after disconnecting the PHY.
Simplify the tc_port/tc_type checks accordingly.
- Don't WARN if the port mode changes, that can happen normally.
No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-5-imre.deak@intel.com
Move the TypeC port handling functions to a new file for clarity.
While at it:
- s/icl_tc_port_connected()/intel_tc_port_connected()/
icl_tc_phy_disconnect(), will be unexported later.
- s/intel_dp_get_fia_supported_lane_count()/
intel_tc_port_fia_max_lane_count()/
It's used for HDMI legacy mode too.
- Simplify function interfaces by passing only dig_port to them.
No functional changes.
v2:
- Fix checkpatch issues: +1/-1 empty lines in intel_tc.c and add
missing SPDX to intel_tc.h. (Jani)
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-4-imre.deak@intel.com
The HW completion flag for the TBT AUX power well enabling/disabling
gets stuck if the firmware tears down the TBT DP tunnel before the
completion.
We shouldn't complain about the timeout, since it's expected to happen
and doesn't cause further issues. We suppress the disabling timeout
already, do the same for enabling.
v2:
- Make the debug message more precise. (José)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-3-imre.deak@intel.com
Add support to read out the TBT PLL HW state.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-2-imre.deak@intel.com
Instead of directly referencing drm_crtc_state, convert to
intel_ctc_state and use the base struct. This is useful when we're
making the split between uapi and hw state, and also makes the
code slightly more readable.
A lot of places also use cstate, instead of the more common crtc_state.
Clean those up to use crtc_state. Same for pstate vs plane_state. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-7-maarten.lankhorst@linux.intel.com
Pass along the correct state as much as possible, instead of relying
on the drm state internally. This is required to rely on hw state
internally soon.
While at it, clean up intel_plane_atomic_check slightly, by using a
helper function to get the intel_crtc. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-6-maarten.lankhorst@linux.intel.com
