Commit Graph

244349 Commits

Author SHA1 Message Date
Jeff Layton
7094564372 cifs: always do is_path_accessible check in cifs_mount
Currently, we skip doing the is_path_accessible check in cifs_mount if
there is no prefixpath. I have a report of at least one server however
that allows a TREE_CONNECT to a share that has a DFS referral at its
root. The reporter in this case was using a UNC that had no prefixpath,
so the is_path_accessible check was not triggered and the box later hit
a BUG() because we were chasing a DFS referral on the root dentry for
the mount.

This patch fixes this by removing the check for a zero-length
prefixpath.  That should make the is_path_accessible check be done in
this situation and should allow the client to chase the DFS referral at
mount time instead.

Cc: stable@kernel.org
Reported-and-Tested-by: Yogesh Sharma <ysharma@cymer.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:52:08 +00:00
Steve French
5443d130aa various endian fixes to cifs
make modules C=2 M=fs/cifs CF=-D__CHECK_ENDIAN__

Found for example:

 CHECK   fs/cifs/cifssmb.c
fs/cifs/cifssmb.c:728:22: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:728:22:    expected unsigned short [unsigned] [usertype] Tid
fs/cifs/cifssmb.c:728:22:    got restricted __le16 [usertype] <noident>
fs/cifs/cifssmb.c:1883:45: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:1883:45:    expected long long [signed] [usertype] fl_start
fs/cifs/cifssmb.c:1883:45:    got restricted __le64 [usertype] start
fs/cifs/cifssmb.c:1884:54: warning: restricted __le64 degrades to integer
fs/cifs/cifssmb.c:1885:58: warning: restricted __le64 degrades to integer
fs/cifs/cifssmb.c:1886:43: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:1886:43:    expected unsigned int [unsigned] fl_pid
fs/cifs/cifssmb.c:1886:43:    got restricted __le32 [usertype] pid

In checking new smb2 code for missing endian conversions, I noticed
some endian errors had crept in over the last few releases into the
cifs code (symlink, ntlmssp, posix lock, and also a less problematic warning
in fscache).  A followon patch will address a few smb2 endian
problems.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:51:35 +00:00
Steve French
6da9791061 Elminate sparse __CHECK_ENDIAN__ warnings on port conversion
Ports are __be16 not unsigned short int

Eliminates the remaining fixable endian warnings:

~/cifs-2.6$ make modules C=1 M=fs/cifs CF=-D__CHECK_ENDIAN__
  CHECK   fs/cifs/connect.c
fs/cifs/connect.c:2408:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2408:23:    expected unsigned short *sport
fs/cifs/connect.c:2408:23:    got restricted __be16 *<noident>
fs/cifs/connect.c:2410:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2410:23:    expected unsigned short *sport
fs/cifs/connect.c:2410:23:    got restricted __be16 *<noident>
fs/cifs/connect.c:2416:24: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2416:24:    expected unsigned short [unsigned] [short] <noident>
fs/cifs/connect.c:2416:24:    got restricted __be16 [usertype] <noident>
fs/cifs/connect.c:2423:24: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2423:24:    expected unsigned short [unsigned] [short] <noident>
fs/cifs/connect.c:2423:24:    got restricted __be16 [usertype] <noident>
fs/cifs/connect.c:2326:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2326:23:    expected unsigned short [unsigned] sport
fs/cifs/connect.c:2326:23:    got restricted __be16 [usertype] sin6_port
fs/cifs/connect.c:2330:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2330:23:    expected unsigned short [unsigned] sport
fs/cifs/connect.c:2330:23:    got restricted __be16 [usertype] sin_port
fs/cifs/connect.c:2394:22: warning: restricted __be16 degrades to integer

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:49:08 +00:00
Steve French
2e325d5973 Max share size is too small
Max share name was set to 64, and (at least for Windows)
can be 80.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:47:14 +00:00
Chris Mason
874d0d2633 Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into for-linus 2011-04-11 20:46:03 -04:00
Arne Jansen
507903b818 btrfs: using cached extent_state in set/unlock combinations
In several places the sequence (set_extent_uptodate, unlock_extent) is used.
This leads to a duplicate lookup of the extent state. This patch lets
set_extent_uptodate return a cached extent_state which can be passed to
unlock_extent_cached.
The occurences of the above sequences are updated to use the cache. Only
end_bio_extent_readpage is updated that it first gets a cached state to
pass it to the readpage_end_io_hook as the prototype requested and is later
on being used for set/unlock.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:45:36 -04:00
Josef Bacik
13c5a93e70 Btrfs: avoid taking the trans_mutex in btrfs_end_transaction
I've been working on making our O_DIRECT latency not suck and I noticed we were
taking the trans_mutex in btrfs_end_transaction.  So to do this we convert
num_writers and use_count to atomic_t's and just decrement them in
btrfs_end_transaction.  Instead of deleting the transaction from the trans list
in put_transaction we do that in btrfs_commit_transaction() since that's the
only time it actually needs to be removed from the list.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-11 20:43:52 -04:00
Steve French
8727c8a85f Allow user names longer than 32 bytes
We artificially limited the user name to 32 bytes, but modern servers handle
larger.  Set the maximum length to a reasonable 256, and make the user name
string dynamically allocated rather than a fixed size in session structure.
Also clean up old checkpatch warning.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:42:06 +00:00
Jeff Layton
bdf1b03e09 cifs: replace /proc/fs/cifs/Experimental with a module parm
This flag currently only affects whether we allow "zero-copy" writes
with signing enabled. Typically we map pages in the pagecache directly
into the write request. If signing is enabled however and the contents
of the page change after the signature is calculated but before the
write is sent then the signature will be wrong. Servers typically
respond to this by closing down the socket.

Still, this can provide a performance benefit so the "Experimental" flag
was overloaded to allow this. That's really not a good place for this
option however since it's not clear what that flag does.

Move that flag instead to a new module parameter that better describes
its purpose. That's also better since it can be set at module insertion
time by configuring modprobe.d.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:40:43 +00:00
Jeff Layton
7797069305 cifs: check for private_data before trying to put it
cifs_close doesn't check that the filp->private_data is non-NULL before
trying to put it. That can cause an oops in certain error conditions
that can occur on open or lookup before the private_data is set.

Reported-by: Ben Greear <greearb@candelatech.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:39:05 +00:00
Xin Zhong
e15d054242 Btrfs: fix subvolume mount by name problem when default mount subvolume is set
We create two subvolumes (meego_root and meego_home) in
btrfs root directory. And set meego_root as default mount
subvolume. After we remount btrfs, meego_root is mounted
to top directory by default. Then when we try to mount
meego_home (subvol=meego_home) to a subdirectory, it failed.
The problem is when default mount subvolume is set to
meego_root, we search meego_home in meego_root but can not find
it. So the solution is to add a new mount option (subvolrootid)
to specify subvol id of root and search subvol name in it. For
our case, now we can use "-o subvolrootid=0,subvol=meego_home)
to mount meego_home.

Detail information can be found in meego bugzilla:
https://bugs.meego.com/show_bug.cgi?id=15055

Signed-off-by: Zhong, Xin <xin.zhong@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:26:50 -04:00
Daniel J Blueman
13f2696f1d fix user annotation in ioctl.c
Fix address space annotation correct in ioctl.c.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>

 		       BTRFS_BLOCK_GROUP_SYSTEM,
@@ -2387,7 +2387,7 @@ long btrfs_ioctl_space_info(struct btrfs_root
*root, void __user *arg)
 		up_read(&info->groups_sem);
 	}

-	user_dest = (struct btrfs_ioctl_space_info *)
+	user_dest = (struct btrfs_ioctl_space_info __user *)
 		(arg + sizeof(struct btrfs_ioctl_space_args));

 	if (copy_to_user(user_dest, dest_orig, alloc_size))
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:25:46 -04:00
Josef Bacik
a1b75f7d96 Btrfs: check for duplicate iov_base's when doing dio reads
Apparently it is ok to submit a read to an IDE device with the same target page
for different offsets.  This is what Windows does under qemu.  The problem is
under DIO we expect them to be different buffers for checksumming reasons, and
so this sort of thing will result in checksum errors, when in reality the file
is fine.  So when reading, check to make sure that all iov bases are different,
and if they aren't fall back to buffered mode, since that will work out right.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:25:06 -04:00
Sergei Trofimovich
3387206f26 btrfs: properly handle overlapping areas in memmove_extent_buffer
Fix data corruption caused by memcpy() usage on overlapping data.
I've observed it first when found out usermode linux crash on btrfs.

?all chain is the following:
------------[ cut here ]------------
WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219()
Call Trace:
6fa39a58:  [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c
6fa39a68:  [<60029ad9>] warn_slowpath_common+0x59/0x70
6fa39aa8:  [<60029b05>] warn_slowpath_null+0x15/0x17
6fa39ab8:  [<600efc97>] memcpy_extent_buffer+0x1a5/0x219
6fa39b48:  [<600efd9f>] memmove_extent_buffer+0x94/0x208
6fa39bc8:  [<600becbf>] btrfs_del_items+0x214/0x473
6fa39c78:  [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda
6fa39cc8:  [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d
6fa39d08:  [<600d7864>] btrfs_start_transaction+0xe/0x10
6fa39d48:  [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b
6fa39d78:  [<600e04bc>] btrfs_unlink+0x70/0xef
6fa39dc8:  [<6007f0d0>] vfs_unlink+0x58/0xa3
6fa39df8:  [<60080278>] do_unlinkat+0xd4/0x162
6fa39e48:  [<600517db>] call_rcu_sched+0xe/0x10
6fa39e58:  [<600452a8>] __put_cred+0x58/0x5a
6fa39e78:  [<6007446c>] sys_faccessat+0x154/0x166
6fa39ed8:  [<60080317>] sys_unlink+0x11/0x13
6fa39ee8:  [<60016b80>] handle_syscall+0x58/0x70
6fa39f08:  [<60021377>] userspace+0x2d4/0x381
6fa39fc8:  [<60014507>] fork_handler+0x62/0x69
---[ end trace 70b0ca2ef0266b93 ]---

http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.html

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:25:06 -04:00
Yoshinori Sano
8fb27640d0 Btrfs: fix memory leaks in btrfs_new_inode()
This patch fixes memory leaks in btrfs_new_inode().

Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 20:25:06 -04:00
Linus Torvalds
a6360dd37e Linux 2.6.39-rc3 2011-04-11 17:21:51 -07:00
Linus Torvalds
1e05ff020f Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: use proper interfaces for on-stack plugging
  xfs: fix xfs_debug warnings
  xfs: fix variable set but not used warnings
  xfs: convert log tail checking to a warning
  xfs: catch bad block numbers freeing extents.
  xfs: push the AIL from memory reclaim and periodic sync
  xfs: clean up code layout in xfs_trans_ail.c
  xfs: convert the xfsaild threads to a workqueue
  xfs: introduce background inode reclaim work
  xfs: convert ENOSPC inode flushing to use new syncd workqueue
  xfs: introduce a xfssyncd workqueue
  xfs: fix extent format buffer allocation size
  xfs: fix unreferenced var error in xfs_buf.c

Also, applied patch from Tony Luck that fixes ia64:
  xfs_destroy_workqueues() should not be tagged with__exit
in the branch before merging.
2011-04-11 15:48:57 -07:00
Luck, Tony
39411f81ee xfs_destroy_workqueues() should not be tagged with__exit
ia64 throws away .exit sections for the built-in CONFIG case, so routines
that are used in other circumstances should not be tagged as __exit.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11 15:47:20 -07:00
Linus Torvalds
a97b52022a Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix data corruption regression by reverting commit 6de9843dab
  ext4: Allow indirect-block file to grow the file size to max file size
  ext4: allow an active handle to be started when freezing
  ext4: sync the directory inode in ext4_sync_parent()
  ext4: init timer earlier to avoid a kernel panic in __save_error_info
  jbd2: fix potential memory leak on transaction commit
  ext4: fix a double free in ext4_register_li_request
  ext4: fix credits computing for indirect mapped files
  ext4: remove unnecessary [cm]time update of quota file
  jbd2: move bdget out of critical section
2011-04-11 15:45:47 -07:00
Linus Torvalds
18770c7c3a Merge branch 'for-2.6.39' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix oops on lock failure
  nfsd: fix auth_domain reference leak on nlm operations
2011-04-11 15:45:17 -07:00
Linus Torvalds
6b98cd5aad Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  dt/fsldma: fix build warning caused by of_platform_device changes
  spi: Fix race condition in stop_queue()
  gpio/pch_gpio: Fix output value of pch_gpio_direction_output()
  gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output()
  gpio/pca953x: fix error handling path in probe() call
2011-04-11 15:44:38 -07:00
Shriram Rajagopalan
d419e4c0f7 fix XEN_SAVE_RESTORE Kconfig dependencies
Make XEN_SAVE_RESTORE select HIBERNATE_CALLBACKS.
Remove XEN_SAVE_RESTORE dependency from PM_SLEEP.

Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-11 22:54:48 +02:00
Rafael J. Wysocki
1f112cee07 PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
Xen save/restore is going to use hibernate device callbacks for
quiescing devices and putting them back to normal operations and it
would need to select CONFIG_HIBERNATION for this purpose.  However,
that also would cause the hibernate interfaces for user space to be
enabled, which might confuse user space, because the Xen kernels
don't support hibernation.  Moreover, it would be wasteful, as it
would make the Xen kernels include a substantial amount of code that
they would never use.

To address this issue introduce new power management Kconfig option
CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code
that is necessary for the hibernate device callbacks to work and make
CONFIG_HIBERNATION select it.  Then, Xen save/restore will be able to
select CONFIG_HIBERNATE_CALLBACKS without dragging the entire
hibernate code along with it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-11 22:54:42 +02:00
Linus Torvalds
b42282e5a0 pci: fix PCI bus allocation alignment handling
In commit 13583b1659 ("PCI: refactor io size calculation code") Ram
had a thinko in the refactorization of the code: the end result used the
variable 'align' for the bus alignment, but the original code used
'min_align'.

Since then, another use of that 'align' variable got introduced by
commit c8adf9a3e8 ("PCI: pre-allocate additional resources to devices
only after successful allocation of essential resources.")

Fix both of those uses to use 'min_align' as they should.

Daniel Hellstrom <daniel@gaisler.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11 10:53:11 -07:00
Sebastian Andrzej Siewior
30d746c680 x86/ce4100: Add reg property to bridges
without the reg property Ben's new code won't find the PCI & ISA
bridge and the devices won't get the DT-node attached.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: monstr@monstr.eu
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20110407121315.GA9204@linutronix.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11 17:37:02 +02:00
Linus Torvalds
c44eaf41a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  net: Add support for SMSC LAN9530, LAN9730 and LAN89530
  mlx4_en: Restoring RX buffer pointer in case of failure
  mlx4: Sensing link type at device initialization
  ipv4: Fix "Set rt->rt_iif more sanely on output routes."
  MAINTAINERS: add entry for Xen network backend
  be2net: Fix suspend/resume operation
  be2net: Rename some struct members for clarity
  pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev
  dsa/mv88e6131: add support for mv88e6085 switch
  ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)
  be2net: Fix a potential crash during shutdown.
  bna: Fix for handling firmware heartbeat failure
  can: mcp251x: Allow pass IRQ flags through platform data.
  smsc911x: fix mac_lock acquision before calling smsc911x_mac_read
  iwlwifi: accept EEPROM version 0x423 for iwl6000
  rt2x00: fix cancelling uninitialized work
  rtlwifi: Fix some warnings/bugs
  p54usb: IDs for two new devices
  wl12xx: fix potential buffer overflow in testmode nvs push
  zd1211rw: reset rx idle timer from tasklet
  ...
2011-04-11 07:27:24 -07:00
NeilBrown
109b81296c block: splice plug list to local context
If the request_fn ends up blocking, we could be re-entering
the plug flush. Since the list is protected by explicitly
not allowing schedule events, this isn't a terribly good idea.

Additionally, it can cause us to recurse. As request_fn called by
__blk_run_queue is allowed to 'schedule()' (after dropping the queue
lock of course), it is possible to get a recursive call:

 schedule -> blk_flush_plug -> __blk_finish_plug -> flush_plug_list
      -> __blk_run_queue -> request_fn -> schedule

We must make sure that the second schedule does not call into
blk_flush_plug again.  So instead of leaving the list of requests on
blk_plug->list, move them to a separate list leaving blk_plug->list
empty.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-11 14:13:10 +02:00
Ken Chen
b30aef17f7 sched: Fix erroneous all_pinned logic
The scheduler load balancer has specific code to deal with cases of
unbalanced system due to lots of unmovable tasks (for example because of
hard CPU affinity). In those situation, it excludes the busiest CPU that
has pinned tasks for load balance consideration such that it can perform
second 2nd load balance pass on the rest of the system.

This all works as designed if there is only one cgroup in the system.

However, when we have multiple cgroups, this logic has false positives and
triggers multiple load balance passes despite there are actually no pinned
tasks at all.

The reason it has false positives is that the all pinned logic is deep in
the lowest function of can_migrate_task() and is too low level:

load_balance_fair() iterates each task group and calls balance_tasks() to
migrate target load. Along the way, balance_tasks() will also set a
all_pinned variable. Given that task-groups are iterated, this all_pinned
variable is essentially the status of last group in the scanning process.
Task group can have number of reasons that no load being migrated, none
due to cpu affinity. However, this status bit is being propagated back up
to the higher level load_balance(), which incorrectly think that no tasks
were moved.  It kick off the all pinned logic and start multiple passes
attempt to move load onto puller CPU.

To fix this, move the all_pinned aggregation up at the iterator level.
This ensures that the status is aggregated over all task-groups, not just
last one in the list.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTi=ernzNawaR5tJZEsV_QVnfxqXmsQ@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11 11:08:54 +02:00
Ken Chen
b0432d8f16 sched: Fix sched-domain avg_load calculation
In function find_busiest_group(), the sched-domain avg_load isn't
calculated at all if there is a group imbalance within the domain. This
will cause erroneous imbalance calculation.

The reason is that calculate_imbalance() sees sds->avg_load = 0 and it
will dump entire sds->max_load into imbalance variable, which is used
later on to migrate entire load from busiest CPU to the puller CPU.

This has two really bad effect:

1. stampede of task migration, and they won't be able to break out
   of the bad state because of positive feedback loop: large load
   delta -> heavier load migration -> larger imbalance and the cycle
   goes on.

2. severe imbalance in CPU queue depth.  This causes really long
   scheduling latency blip which affects badly on application that
   has tight latency requirement.

The fix is to have kernel calculate domain avg_load in both cases. This
will ensure that imbalance calculation is always sensible and the target
is usually half way between busiest and puller CPU.

Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20110408002322.3A0D812217F@elm.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11 11:08:54 +02:00
Stephane Eranian
e566b76ed3 perf_event: Fix cgrp event scheduling bug in perf_enable_on_exec()
There is a bug in perf_event_enable_on_exec() when cgroup events are
active on a CPU: the cgroup events may be scheduled twice causing event
state corruptions which eventually may lead to kernel panics.

The reason is that the function needs to first schedule out the cgroup
events, just like for the per-thread events. The cgroup event are
scheduled back in automatically from the perf_event_context_sched_in()
function.

The patch also adds a WARN_ON_ONCE() is perf_cgroup_switch() to catch any
bogus state.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110406005454.GA1062@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11 11:07:55 +02:00
Ira W. Snyder
8faa7cf828 dt/fsldma: fix build warning caused by of_platform_device changes
Commit 000061245a, "dt/powerpc:
Eliminate users of of_platform_{,un}register_driver" forgot to convert
the type of structure passed into platform_device_register() when it
was converted from of_platform_device_register. Fix it.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-10 23:34:38 -07:00
Dave Airlie
d85023a3cd Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes
* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nvc0: improve vm flush function
  drm/nv50-nvc0: remove some code that doesn't belong here
  drm/nv50: use "nv86" tlb flush method on everything except 0x50/0xac
  drm/nouveau: quirk for XFX GT-240X-YA
  drm/nv50-nvc0: work around an evo channel hang that some people see
  drm/nouveau: implement init table opcode 0x5c
  drm/nouveau: fix oops on unload with disabled LVDS panel
  nv30: Fix parsing of perf table
  drm/nouveau: correct memtiming table parsing for nv4x
2011-04-11 15:26:01 +10:00
Theodore Ts'o
c820563602 ext4: fix data corruption regression by reverting commit 6de9843dab
Revert commit 6de9843dab, since it
caused a data corruption regression with BitTorrent downloads.  Thanks
to Damien for discovering and bisecting to find the problem commit.

https://bugzilla.kernel.org/show_bug.cgi?id=32972

Reported-by: Damien Grassart <damien@grassart.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10 22:30:07 -04:00
Kazuya Mio
f80da1e70f ext4: Allow indirect-block file to grow the file size to max file size
We can create 4402345721856 byte file with indirect block mapping.
However, if we grow an indirect-block file to the size with ftruncate(),
we can see an ext4 warning. The following patch fixes this problem.

How to reproduce:
# dd if=/dev/zero of=/mnt/mp1/hoge bs=1 count=0 seek=4402345721856
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.000221428 s, 0.0 kB/s
# tail -n 1 /var/log/messages
Nov 25 15:10:27 test kernel: EXT4-fs warning (device sda8): ext4_block_to_path:345: block 1074791436 > max in inode 12

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10 22:06:36 -04:00
Yongqiang Yang
be4f27d324 ext4: allow an active handle to be started when freezing
ext4_journal_start_sb() should not prevent an active handle from being
started due to s_frozen.  Otherwise, deadlock is easy to happen, below
is a situation.

================================================
     freeze         |       truncate
================================================
                    |  ext4_ext_truncate()
    freeze_super()  |   starts a handle
    sets s_frozen   |
                    |  ext4_ext_truncate()
                    |  holds i_data_sem
  ext4_freeze()     |
  waits for updates |
                    |  ext4_free_blocks()
                    |  calls dquot_free_block()
                    |
                    |  dquot_free_blocks()
                    |  calls ext4_dirty_inode()
                    |
                    |  ext4_dirty_inode()
                    |  trys to start an active
                    |  handle
                    |
                    |  block due to s_frozen
================================================

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Amir Goldstein <amir73il@users.sf.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2011-04-10 22:06:07 -04:00
Curt Wohlgemuth
0893ed458b ext4: sync the directory inode in ext4_sync_parent()
ext4 has taken the stance that, in the absence of a journal,
when an fsync/fdatasync of an inode is done, the parent
directory should be sync'ed if this inode entry is new.
ext4_sync_parent(), which implements this, does indeed sync
the dirent pages for parent directories, but it does not
sync the directory *inode*.  This patch fixes this.

Also now return error status from ext4_sync_parent().

I tested this using a power fail test, which panics a
machine running a file server getting requests from a
client.  Without this patch, on about every other test run,
the server is missing many, many files that had been synced.
With this patch, on > 6 runs, I see zero files being lost.

Google-Bug-Id: 4179519
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10 22:05:31 -04:00
Steve Glendinning
88edaa4159 net: Add support for SMSC LAN9530, LAN9730 and LAN89530
This patch adds support for SMSC's LAN9530, LAN9730 and LAN89530 USB
ethernet controllers to the existing smsc95xx driver by adding
their new USB VID/PID pairs.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10 18:59:27 -07:00
Justin P. Mattock
aec995900f ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile.
The patch below removes an unused config variable found by using a kernel
cleanup script.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:37 +01:00
Catalin Marinas
c98c09773d ARM: 6868/1: Preserve the VFP state during fork
VFP registers d16-d31 are callee saved registers and must be preserved
during function calls, including fork(). The VFP configuration should
also be preserved. The patch copies the full VFP state to the child
process.

Reported-by: Paul Wright <paul.wright@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:37 +01:00
Catalin Marinas
2e82669acf ARM: 6867/1: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks
This patch adds THREAD_NOTIFY_COPY for calling registered handlers
during the copy_thread() function call. It also changes the VFP handler
to use a switch statement rather than if..else and ignore this event.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:36 +01:00
Catalin Marinas
974508262e ARM: 6866/1: Do not restrict HIGHPTE to !OUTER_CACHE
The HIGHPTE config option depends on !OUTER_CACHE. However, there is no
set_pte_ext() function that does outer cache maintenance by physical
address, hence no need for such restriction.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:36 +01:00
Will Deacon
6759788b94 ARM: 6865/1: perf: ensure pass through zero is counted on overflow
Commit a737823d ("ARM: perf: ensure overflows aren't missed due to IRQ
latency") changed the way that event deltas are calculated on overflow
so that we don't miss events when the new count value overtakes the
previous one.

Unfortunately, we forget to count the event that passes through zero so
we end up being off by 1. This patch adds on the correction.

Reported-by: Chris Moore <moore@free.fr>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:35 +01:00
Will Deacon
e89c0d7090 ARM: 6864/1: hw_breakpoint: clear DBGVCR out of reset
The DBGVCR, used for configuring vector catch debug events, is UNKNOWN
out of reset on ARMv7. When enabling monitor mode, this must be zeroed
to avoid UNPREDICTABLE behaviour.

This patch adds the zeroing code to the debug reset path.

Cc: stable <stable@kernel.org>
Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:35 +01:00
Linus Torvalds
4263a2f1da Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Don't query connections for widgets have no connections
  ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E)
  ALSA: hda - HDMI: Fix MCP7x audio infoframe checksums
  ALSA: usb-audio: define another USB ID for a buggy USB MIDI cable
  ALSA: HDA: Fix dock mic for Lenovo X220-tablet
  ASoC: format_register_str: Don't clip register values
  ASoC: PXA: Fix oops in __pxa2xx_pcm_prepare
  ASoC: zylonite: set .codec_dai_name in initializer
2011-04-10 09:56:10 -07:00
J. Bruce Fields
23fcf2ec93 nfsd4: fix oops on lock failure
Lock stateid's can have access_bmap 0 if they were only partially
initialized (due to a failed lock request); handle that case in
free_generic_stateid.

------------[ cut here ]------------
kernel BUG at fs/nfsd/nfs4state.c:380!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/mm/ksm/run
Modules linked in: nfs fscache md4 nls_utf8 cifs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc nfsd lockd nfs_acl auth_rpcgss sunrpc ipv6 ppdev parport_pc parport pcnet32 mii pcspkr microcode i2c_piix4 BusLogic floppy [last unloaded: mperf]

Pid: 1468, comm: nfsd Not tainted 2.6.38+ #120 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
EIP: 0060:[<e24f180d>] EFLAGS: 00010297 CPU: 0
EIP is at nfs4_access_to_omode+0x1c/0x29 [nfsd]
EAX: ffffffff EBX: dd758120 ECX: 00000000 EDX: 00000004
ESI: dd758120 EDI: ddfe657c EBP: dd54dde0 ESP: dd54dde0
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process nfsd (pid: 1468, ti=dd54c000 task=ddc92580 task.ti=dd54c000)
Stack:
 dd54ddf0 e24f19ca 00000000 ddfe6560 dd54de08 e24f1a5d dd758130 deee3a20
 ddfe6560 31270000 dd54df1c e24f52fd 0000000f dd758090 e2505dd0 0be304cf
 dbb51d68 0000000e ddfe657c ddcd8020 dd758130 dd758128 dd7580d8 dd54de68
Call Trace:
 [<e24f19ca>] free_generic_stateid+0x1c/0x3e [nfsd]
 [<e24f1a5d>] release_lockowner+0x71/0x8a [nfsd]
 [<e24f52fd>] nfsd4_lock+0x617/0x66c [nfsd]
 [<e24e57b6>] ? nfsd_setuser+0x199/0x1bb [nfsd]
 [<e24e056c>] ? nfsd_setuser_and_check_port+0x65/0x81 [nfsd]
 [<c07a0052>] ? _cond_resched+0x8/0x1c
 [<c04ca61f>] ? slab_pre_alloc_hook.clone.33+0x23/0x27
 [<c04cac01>] ? kmem_cache_alloc+0x1a/0xd2
 [<c04835a0>] ? __call_rcu+0xd7/0xdd
 [<e24e0dfb>] ? fh_verify+0x401/0x452 [nfsd]
 [<e24f0b61>] ? nfsd4_encode_operation+0x52/0x117 [nfsd]
 [<e24ea0d7>] ? nfsd4_putfh+0x33/0x3b [nfsd]
 [<e24f4ce6>] ? nfsd4_delegreturn+0xd4/0xd4 [nfsd]
 [<e24ea2c9>] nfsd4_proc_compound+0x1ea/0x33e [nfsd]
 [<e24de6ee>] nfsd_dispatch+0xd1/0x1a5 [nfsd]
 [<e1d6e1c7>] svc_process_common+0x282/0x46f [sunrpc]
 [<e1d6e578>] svc_process+0xdc/0xfa [sunrpc]
 [<e24de0fa>] nfsd+0xd6/0x115 [nfsd]
 [<e24de024>] ? nfsd_shutdown+0x24/0x24 [nfsd]
 [<c0454322>] kthread+0x62/0x67
 [<c04542c0>] ? kthread_worker_fn+0x114/0x114
 [<c07a6ebe>] kernel_thread_helper+0x6/0x10
Code: eb 05 b8 00 00 27 4f 8d 65 f4 5b 5e 5f 5d c3 83 e0 03 55 83 f8 02 89 e5 74 17 83 f8 03 74 05 48 75 09 eb 09 b8 02 00 00 00 eb 0b <0f> 0b 31 c0 eb 05 b8 01 00 00 00 5d c3 55 89 e5 57 56 89 d6 8d
EIP: [<e24f180d>] nfs4_access_to_omode+0x1c/0x29 [nfsd] SS:ESP 0068:dd54dde0
---[ end trace 2b0bf6c6557cb284 ]---

The trace route is:

 -> nfsd4_lock()
   -> if (lock->lk_is_new) {
     -> alloc_init_lock_stateid()

        3739: stp->st_access_bmap = 0;

   ->if (status && lock->lk_is_new && lock_sop)
     -> release_lockowner()
      -> free_generic_stateid()
       -> nfs4_access_bmap_to_omode()
          -> nfs4_access_to_omode()

        380: BUG();   *****

This problem was introduced by 0997b17360.

Reported-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Tested-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-10 12:21:27 -04:00
Linus Torvalds
510ec7bc3b Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region
  mtd: atmel_nand: modify test case for using DMA operations
  mtd: atmel_nand: fix support for CPUs that do not support DMA access
  mtd: atmel_nand: trivial: change DMA usage information trace
  mtd: mtdswap: fix printk format warning
2011-04-09 13:23:50 -07:00
Takashi Iwai
84f3b6dab9 Merge branch 'fix/hda' into for-linus 2011-04-09 10:05:53 +02:00
Takashi Iwai
664cee46e7 Merge branch 'fix/asoc' into for-linus 2011-04-09 10:05:30 +02:00
Alex Deucher
d4864d604a drm/radeon/kms: make radeon i2c put/get bytes less noisy
Switch some errors to debug output.  These are generally harmless
and tend to confuse users.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09 16:21:13 +10:00
Alex Deucher
9bb09fa1b5 drm/radeon/kms: pll tweaks for rv6xx
Prefer minm over maxp.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=35994

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09 16:20:41 +10:00