Remove some unused ASIC check logic.
Remove some definition of amdgpu_device which only used by
the removed ASIC check logic.(V2)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When I update the latest kernel, I see the following "____ptrval____" boot
messages.
[ 1.872600] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 and cpu addr 0x(____ptrval____)
[ 1.879095] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 and cpu addr 0x(____ptrval____)
Both radeon_fence_driver_start_ring() and amdgpu_fence_driver_start_ring()
have the similar issue, there exists the following two methods to solve it:
(1) Use "%pK" instead of "%p" so that the CPU address can be printed when
the kptr_restrict sysctl is set to 1.
(2) Just completely drop the CPU address suggested by Christian, because
the CPU address was useful in the past, but isn't any more. We now have a
debugfs file to read the current fence values.
Since the CPU address is not much useful, just remove the debug info about
CPU address.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support inbox1 in CW4 we need to actually program CW4 instead of
region 4 for newer firmware.
This is done correctly on DCN20/DCN21 but this code wasn't added to
DCN30.
[How]
Copy over the missing code. It doesn't need address translation since
DCN30 uses virtual addressing.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v9.4.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v2.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v2.1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v2.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in VCN2/JEPG2. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in UVD7/VCE4. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of
hardcode in VCN1/JEPG1. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in GMC10.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in GMC9.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to abstract register distances between two continuous
context domains and invalidation engines. In different ip headers, these
distances may be differences.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_pasid.c isn't using the kfd2kgd interface any more. Remove redundant
code trying to look up a device for finding that interface.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the mutext lock/unlock outside of the if(),
as the mutex is always taken: either in the if()
branch or in the else branch.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Suggested-By: Luben Tukov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This field is missing for dcn3 so add it from dcn20.
enc2_set_dynamic_metadata() trys to sets this and we get a
generic_reg warning since the mask is not defined.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to be able to see SMU messages sent and their responses
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we don't explicitly send a request for a minimum PHYCLK, and
we hope that the dependencies other clocks have will raise PHYCLK when
needed.
[How]
- new clk_mgr function to keep track of PHYCLK requirements
- request maximum requirement across all links
- remove PHYCLK from clock state comparator, as it doesn't come from DML
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VSC infoframe is needed for PSR. Previously only DMCU controller
supported PSR. Now DMUB also implements PSR.
[How]
Remove VSC infoframe dependency on DMCU.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DAL behaviour is to not send VSIF if mode does not support VRR
(ie. FS range is < 10Hz). However, we should still set FS Native Color
Active bit in some unsupported mode cases.
[How]
Remove check for if VRR is supported before building infopacket.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver re-initialize registers already set in FW
[How]
Transfer init to FW
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print scaling parameters as they are calculated in diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMHUB powergating should be disabled on navi12 and enabled on sienna
cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use RREG32_KIQ to read gfx register when try to get gfx/sdma
clockgating state instead of RREG32, as it will result
to system hard hang when GPU is enter into GFXOFF state.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support for loading ucode with ta_firmware_header_v2_0
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for integrated_system_info table v12. Use the actual
v12 structure.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
176 | BUG();
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's otherwise properly supported, just needs exposing to userspace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for GWS in Arcturus, which needs MEC2 firmware #48
or above. Fix the MEC2 version check for Vega 10 GWS support,
since Vega 10 firmware adds 0x8000 to the actual firmware
revision. We were previously declaring support where it did not
exist.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2eee0229f6.
Fallback to a stable base until we have a correct new one
Signed-off-by:Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
originally we kickoff IB test asynchronously with driver's
init, thus
the IB test may still running when the driver loading
done (modprobe amdgpu done).
if we shutdown VM immediately after amdgpu driver
loaded then GPU may
hang because the IB test is still running
fix:
flush the delayed_init routine at the bottom of device_init
to avoid driver loading done prior to the IB test completes
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PROCESS_QUANTUM, the time the hardware scheduler allows
processes to run before switching to other processes when it becomes
over-subscribed. Increase this to 10ms, to allow processes to better
amortize their task switch times.
Update HQD Quantum, the amount of time that an active queue stays
attached to the CP before we forcibly switch it for another active
queue for fairness.
Setting these so that HQD < PROCESS makes it easier to ensure that
we get fairness when we have multiple active queues on the device.
Otherwise we may start process-swapping before we get to all the
queues in a CP.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of certain display configurations we want to allow max detile
buffer utilization by using 4 to 1 mpc combine
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register key for AE or QA do regression test. New edid status for
check.
[How]
Add register key edid_read_retry_times.
Add new edid status EDID_FALL_BACK.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add command for notification of active streams to DMUB
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
