Commit Graph

576701 Commits

Author SHA1 Message Date
Alison Schofield
1c118b7230 staging: iio: ad7192: use iio_device_{claim|release}_direct_mode()
Replace the code that guarantees the device stays in direct mode with
iio_device_{claim|release}_direct_mode() which does same.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 18:09:54 +00:00
Alison Schofield
08a3380551 iio: core: implement iio_device_{claim|release}_direct_mode()
It is often the case that the driver wants to be sure a device stays
in direct mode while it is executing a task or series of tasks.  To
accomplish this today, the driver performs this sequence: 1) take the
device state lock, 2) verify it is not in a buffered mode, 3) execute
some tasks, and 4) release that lock.

This patch introduces a pair of helper functions that simplify these
steps and make it more semantically expressive.

iio_device_claim_direct_mode()
        If the device is not in any buffered mode it is guaranteed
        to stay that way until iio_release_direct_mode() is called.

iio_device_release_direct_mode()
        Release the claim. Device is no longer guaranteed to stay
        in direct mode.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 11:17:19 +00:00
Martin Kepplinger
e8731180fb iio: mma8452: add support for FXLS8471Q
This adds support for Freescale's (now NXP's) FXLS8471Q accelerometer.

We use MMA8451Q's configuration because for what the driver supports,
FXLS8471Q is the same.

Support for FXLS8471Q's features (fast SPI interface and a larger FIFO,
among others) can be added to this driver anytime.

See it's datasheet for the details:
http://cache.nxp.com/files/sensors/doc/data_sheet/FXLS8471Q.pdf

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 10:49:52 +00:00
Tiberiu Breana
1e52fefc9b iio: accel: Add support for the h3lis331dl accelerometer
This commit adds support for STMicroelectronics h3lis331dl high-g
accelerometer. The datasheet for this device can be found here:

http://www.st.com/web/en/resource/technical/document/
datasheet/DM00053090.pdf

Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Reviewed-by: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 10:19:07 +00:00
Lars-Peter Clausen
2bcdb3f2e0 staging:iio:adis16220: Remove adis16220 driver
The ADIS16220 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-09 21:08:50 +00:00
Lars-Peter Clausen
88ae3aedb8 staging:iio:adis16204: Remove adis16204 driver
The ADIS16204 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-09 21:06:02 +00:00
Krzysztof Kozlowski
e84a41d5db iio: adc: Fix build error of missing devm_ioremap_resource on UM
The devres.o gets linked if HAS_IOMEM is present so on ARCH=um
allyesconfig (COMPILE_TEST) failed with:

drivers/built-in.o: In function `at91_adc_probe':
at91-sama5d2_adc.c:(.text+0x48f548): undefined reference to `devm_ioremap_resource'

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 18:48:14 +00:00
Matt Ranostay
c816d9e7a5 iio: imu: mpu6050: fix possible NULL dereferences
Fix possible null dereferencing of i2c and spi driver data.

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 17:51:10 +00:00
Martin Kepplinger
96c0cb2bbf iio: mma8452: add support for runtime power management
This adds support for runtime power management and, if configured, activates
automatic standby after 2 seconds of inactivity.

Inactivity means no read of acceleration values and no events triggered or
activated.

If CONFIG_PM is not set, this doesn't change anything for existing users.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 17:27:56 +00:00
Martin Kepplinger
e866853d67 iio: mma8452: avoid switching to active because of config change
The devices' config registers can only be changed in standby mode.
Up until now the driver just held the device *always* active, so for
changing a config it was *always* necessary to switch to standby.

For upcoming support for runtime pm, the device can as well be in standby
mode. Instead of putting runtime pm functions in there, just keep the
device in standby if it already is. This section is protected by a lock
after all.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 17:22:16 +00:00
Martin Kepplinger
8b8ff3a6a6 iio: mma8452: coding style fixes
fix checkpatch issues like "space before tabs", too long lines or alignment.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 17:18:14 +00:00
Gregor Boirie
63d5d525cb iio:magnetometer:ak8975: power regulator support
Add support for an optional regulator which, if found into device-tree,
will power on device at probing time.
The regulator is declared into ak8975 DTS entry as a "vdd-supply" property.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:25:58 +00:00
Gregor Boirie
d3546af67f iio:magnetometer:ak8975: remove unused field
Remove unused struct ak8975_data attrs field.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:25:10 +00:00
Gregor Boirie
55c0c530f7 iio:magnetometer:ak8975: fix uninitialized chipset
ak_def_array bounds are not properly checked in case of ACPI matching
failure. GCC warns with the following message at line 799:
‘chipset’ may be used uninitialized in this function.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:18:05 +00:00
Ludovic Desroches
f0fa15cce1 iio:adc:at91-sama5d2: fix identation
Remove some extra tabs.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:02:59 +00:00
Ludovic Desroches
43d33f7458 iio:adc:at91-sama5d2: fix typo
Fix typo in the name of a macro.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:01:46 +00:00
Gregor Boirie
033691a9a1 iio:pressure:ms5611: oversampling rate support
Add support for setting and retrieving OverSampling Rate independently for
each of the temperature and pressure channels. This allows userspace to
fine tune hardware sampling process according to the following tradeoffs :
* the higher the OSR, the finer the resolution ;
* the higher the OSR, the lower the noise ;
BUT:
* the higher the OSR, the larger the drift ;
* the higher the OSR, the longer the response time, i.e. less samples per
  unit of time.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 14:45:14 +00:00
Grégor Boirie
7a948c5e05 iio:pressure:ms5611: complete DT support
Add device-tree ID tables and document bindings.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 14:41:00 +00:00
Matt Ranostay
844a656367 iio: potentiometer: tpl0102: change i2c functionality return code
Change i2c_check_functionality condition check return from ENOTSUPP to
EOPNOTSUPP which is now the standard return code.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 14:00:57 +00:00
Chaehyun Lim
9bad1d0a5a staging: wilc1000: use switch statement instead of multiple if statement
It is more readable than multiple if-else statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
9e58c36c77 staging: wilc1000: remove unnecessary comments
This patch removes unnecessary comments because enum cfg_cmd_type
shows each command type without it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
7cc386e9de staging: wilc1000: add enum cfg_type_cmd
This patch adds a new enum cfg_type_cmd to change hard-coded command
type.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
76e6121c90 staging: wilc1000: rename hardwareProductVersion in struct wilc_mac_cfg
This patch renames hardwareProductVersion to hw_product_version to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
e9d24b9e88 staging: wilc1000: remove commented codes
This patch removes commented codes in struct wilc_cfg_str.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
7902451cb9 staging: wilc1000: use TAG_PARAM_OFFSET define
TAG_PARAM_OFFSET is defined at top of this file so that it is used
to simplify codes.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Anchal Jain
63f803518c staging: wilc1000: Remove a whitespace before parenthesis
Remove a whitespace before parenthesis "("

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:58:46 -08:00
Chaehyun Lim
b1d296b3fd staging: wilc1000: remove typedef from enum tenuConnectSts
This patch removes typedef from enum tenuConnectSts and renames it to
connect_status to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:52:13 -08:00
Chaehyun Lim
09db529cb5 staging: wilc1000: remove unused define
This patch removes INFINITE_SLEEP_TIME that is not used in the driver,
so just remove it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:52:13 -08:00
Chaehyun Lim
fc17eaa1ed staging: wilc1000: remove typedef from sdio_cmd53_t
This patch removes typedef from struct sdio_cmd53_t and renames it to
sdio_cmd53.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:52:13 -08:00
Chaehyun Lim
c44e80bc6a staging: wilc1000: remove unnecessary comment codes
This patch removes unnecessary comment code in struct sdio_cmd53_t.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:52:13 -08:00
Chaehyun Lim
a91632fac9 staging: wilc1000: remove typedef from struct sdio_cmd52_t
This patch removes typedef from struct sdio_cmd52_t and renames it to
sdio_cmd52.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 17:52:13 -08:00
Liang Zhen
ea363b419f staging: lustre: do less intense allocating retry for ko2iblnd
ko2iblnd may retry too frequent for growing pools, all schedulers
are spinning if another thread is in progress of allocating a new
pool and can't finish right away because of high system load.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7054
Reviewed-on: http://review.whamcloud.com/16470
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Liang Zhen
4d99b2581e staging: lustre: avoid intensive reconnecting for ko2iblnd
When there is a connection race between two nodes and one side
of the connection is rejected by the other side. o2iblnd will
reconnect immediately, this is going to generate a lot of
trashes if:

 - race winner is slow and can't send out connecting request
   in short time.
 - remote side leaves a cmid in TIMEWAIT state, which will reject
   future connection requests

To resolve this problem, this patch changed the reconnection
behave: reconnection is submitted by connd only if a zombie
connection is being destroyed and there is a pending
reconnection request for the corresponding peer.

Also, after a few rejections, reconnection will have a time
interval between each attempt.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7569
Reviewed-on: http://review.whamcloud.com/17892
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Liang Zhen
82fffff4af staging: lustre: check wr_id returned by ib_poll_cq
If ib_poll_cq returned +ve without initialising ib_wc::wr_id (bug
in driver), then o2iblnd will run into unpredictable situation
because ib_wc::wr_id may refer to stale tx/rx pointer in stack.

It indicates bug in HCA driver if this happened, ko2iblnd should
output console error then close current connection.

This patch could also be helpful for LU-5271

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-519
Reviewed-on: http://review.whamcloud.com/12747
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Doug Oucharek
a70d69ae88 staging: lustre: Change connect peer failed cleanup order
A race condition has been found where connd is cleaning up failed
connections, the peer ref counter goes to zero, but we stil have
a connecting counter > 0.

One possible race is when we are retrying a connection by
calling kiblnd_connect_peer() which itself fails and decrements
the peer ref counter and gets swapped out before it can decrement
the connecting counter.  connd swaps in and cleans up the
connection where it sees a peer ref counter of 1 and a connecting
counter of 1.  This will trigger the assert seen in LU-7210 when
it decrements the peer counter.

The solution: be sure to decrement the connecting counter
before decrementing the peer counter in the peer connect
failure path.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7210
Reviewed-on: http://review.whamcloud.com/17004
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Liang Zhen
992f0b226e staging: lustre: take extra refcount in kiblnd_connreq_done
refcount taken by cmid is not reliable after kiblnd_connreq_done
released the glock because this connection is visible to other
threads, another thread can find and close this connection right
after kiblnd_connreq_done released the glock, if kiblnd_cm_callback
for RDMA_CM_EVENT_DISCONNECTED is called, it can release the
connection refcount taken by cmid. It means the connection could be
destroyed before kiblnd_connreq_done() finish operations on it.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
ntel-bug-id: https://jira.hpdd.intel.com/browse/LU-7210
Reviewed-on: http://review.whamcloud.com/17527
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Amir Shehata
a01fa10856 staging: lustre: make ko2iblnd connect parameters persistent
Store map-on-demand and peertx credits in the peer, since the peer
is persistent. Also made sure that when assigning the parameters
received on the connection to the peer structure through create,
that if another peer is added before grabbing the lock we assign
these parameters to it as well.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3322
Reviewed-on: http://review.whamcloud.com/17074
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Jeremy Filizetti
2fb44f2b0e staging: lustre: Support different ko2iblnd configs between systems
This patch adds suppoort for ko2iblnd to have different values for
peer_credits and map_on_demand between systems.

Signed-off-by: Jeremy Filizetti <jeremy.filizetti@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3322
Reviewed-on: http://review.whamcloud.com/11794
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 16:01:38 -08:00
Bhumika Goyal
27f9aea3db Staging: lustre: lnet: Remove and rename struct typedefs
Remove typedefs from structures stt_timer_t and lst_ping_data_t as typedef
for a structure type is not preferred. The suffix '_t' and the typedefs
are removed using coccinelle.

Script 1:
//Drop typedefs and '_t'
@r1@
type T;
@@

typedef struct { ... } T;

@script:python c1@
T2;
T << r1.T;
@@
if T[-2:] =="_t":
  coccinelle.T2 = T[:-2];
  print T
else:
  coccinelle.T2=T;

@@
type r1.T;
identifier c1.T2;
@@
-typedef
struct
+ T2
{ ... }
-T
;

Script 2:
//Replacement
@@
typedef stt_timer_t;
typedef lst_ping_data_t;
@@
(
- stt_timer_t
+ struct stt_timer
|
- lst_ping_data_t
+ struct lst_ping_data
)

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:28:13 -08:00
Amitoj Kaur Chawla
5210a63ad9 staging: lustre: llite: Remove unnecessary test in if condition
Remove unnecessary test on `rc` variable since it has already been
tested previously.
Fixes following smatch warning:
drivers/staging/lustre/lustre/llite/llite_lib.c:1331 ll_setattr_raw()
warn: we tested 'rc' before and it was 'false'

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:28:13 -08:00
Amir Shehata
7cadcc7c32 staging: lustre: change ibh_mrs from array to pointer
With the removal of PMR we no longer require ibh_mrs field
to be a array so change it to a simple pointer.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6850
Reviewed-on: http://review.whamcloud.com/15788
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Frank Zago
9c3796639d staging: lustre: corrected some typos and grammar errors
Cleanup various typos and grammar errors.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5710
Reviewed-on: http://review.whamcloud.com/12201
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Frank Zago
3667cdedf7 staging: lustre: make o2iblnd_cb.c local functions static
This reduces the code size by about 1KiB.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/11256
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Frank Zago
439b4d45f1 staging: lustre: make o2iblnd local functions static
This fixes sparse warnings such as:
 .../o2iblnd.c:424:1: warning: symbol 'kiblnd_get_peer_info' was not declared.
                      Should it be static?

This reduces the code size by 400 bytes.

The body of "the_o2iblnd" was moved at the end of the file,
to avoid having to declare some static prototypes.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/11255
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
James Simmons
18ddb13cab staging: lustre: reverse LNet and infinband header order
LNet is an abstraction built on top of network APIs such
as infiniband or TCP/IP layer. Since LNet is dependent
on these other layers we should ensure LNet headers
should always come after the infiniband header since the
infiniband headers can influence the LNet header
definitions.

Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5140
Reviewed-on: http://review.whamcloud.com/10571
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Dmitry Eremin
add69d2248 staging: lustre: fix framework.c issues found by Klocwork Insight tool
The functions sfw_test_buffers() and sfw_unload_test() from LNet
selftest both assume sfw_test_instance_t being passed in is never
null. This is corrected here.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Dmitry Eremin
95193044c9 staging: lustre: fix conctl.c issues found by Klocwork Insight tool
The function lst_test_add_ioctl is always copying lstio_tes_param
from userland even if the user doesn't send this data to LNet
selftest. Only consider lstio_tes_param data if lstio_tes_param_len
is not zero.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Dmitry Eremin
72159bb6a0 staging: lustre: fix api-ni.c issues found by Klocwork Insight tool
Pointer 'ni' checked for NULL at line 1569 may be passed to
function and may be dereferenced there by passing argument 1 to
function 'lnet_ni_notify_locked' at line 1621.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
Dmitry Eremin
2b51cb033b staging: lustre: fix socklnd issues found by Klocwork Insight tool
Null pointer 'best_iface' that comes from line 802 may be
dereferenced at line 832.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00
James Simmons
0d92363564 staging: lustre: bind socklnd peers to a specific CPT
Currently the socklnd driver doesn't support
CPT affinity for its peers. Binding peers to
a specific CPT and memory allocated to the
NUMA node belonging to the CPT should give a
performance boost.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7245
Reviewed-on: http://review.whamcloud.com/16710
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02 15:23:49 -08:00