4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
-----BEGIN PGP SIGNATURE-----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=VFXn
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
ARM: dts: bcm: fix msi-controller name and unit address
ARM: dts: BCM53573: Specify serial console parameters
ARM: dts: BCM5301X: Specify serial console params in dtsi files
ARM: dts: NSP: Add crypto (SPU) to dtsi
ARM: dts: NSP: Add mailbox (PDC) to NSP
ARM: dts: BCM953012HR: Add ethernet aliases
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
ARM: dts: NSP: disable i2c DT entry by default
ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
ARM: dts: BCM5301X: Add I2C support to the DT
ARM: dts: BCM5301X: Add TWD WD Support to DT
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: bcm2835: add sdhost controller to devicetree
ARM: dts: bcm283x: Add HDMI audio related properties
ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
ARM: dts: bcm2835: Add the DSI module nodes and clocks.
ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
...
- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
Linksys WRT AC Serie
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWNVVVyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71f1XAJ0WIMcrTJPA
uiYAEbN2f+InledW9wCeOD5+hJTSEFFznZSfbzN4Morh0tw=
=+cen
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT:
- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
Linksys WRT AC Serie
* tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: linksys: enable buffer manager support
ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236
ARM: dts: mvebu: Move mv98dx3236 clock bindings
ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
ARM: dts: armada-xp-98dx3236: combine dfx server nodes
ARM: dts: armada: Add default trigger for sata led
ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)
ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS
ARM: dts: armada-38x add node labels
Video display on DA850 along with some
whitespace clean-up.
Also, enables sound and ADC support on
Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DFR4
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.12" from Sekhar Nori:
DaVinci device tree updates to enable
Video display on DA850 along with some
whitespace clean-up.
Also, enables sound and ADC support on
Lego EV3.
* tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add the output port to the vpif node
ARM: dts: da850-evm: add IO expander node on UI card
ARM: dts: da850: add vpif video display pins
ARM: dts: da850-evm: fix whitespace errors
ARM: da850-lego-ev3: Add device tree node for sound
ARM: da850-lego-ev3: Add device tree node for A/DC
The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
to indicate both compatible values for the SoC and the IP part.
Also increase the register range to 0x100, it has at least 0x48
bytes of registers, and a few extra will not hurt.
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Raspberry Pi, and nodes to describe the DSI and SDHOST hardware
modules (which are still disabled by default).
-----BEGIN PGP SIGNATURE-----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=bTSQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cLA3
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-next-2017-03-21' into devicetree/next
This pull request brings in the DT nodes for enabling HDMI audio on
Raspberry Pi, and nodes to describe the DSI and SDHOST hardware
modules (which are still disabled by default).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The unit address for the msi controller is not valid as there is no reg
property, so remove it. Also, msi-controller is the preferred node name.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds baud rate, parity & number of data bits. It's required to get
serial working correctly.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.
Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cleanup:
* Drop superfluous status update for frequency override on various boards
* Always use status "okay" to enable devices on porger board
* Add INTC-SYS clock to device tree of various SoCs
* Tidyup Audio-DMAC channel for DVC on r8a779[013] SoCs
* Remove unit-address and reg from integrated cache on various SoCs
* Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS
* Fix SCIFB0 dmas indentation on r8a774[35] SoCs
Enhancements:
* Add watchdog timer to r7s72100 SoC
* Update sdhi clock bindings on r7s72100 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2cA1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.12
Cleanup:
* Drop superfluous status update for frequency override on various boards
* Always use status "okay" to enable devices on porger board
* Add INTC-SYS clock to device tree of various SoCs
* Tidyup Audio-DMAC channel for DVC on r8a779[013] SoCs
* Remove unit-address and reg from integrated cache on various SoCs
* Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS
* Fix SCIFB0 dmas indentation on r8a774[35] SoCs
Enhancements:
* Add watchdog timer to r7s72100 SoC
* Update sdhi clock bindings on r7s72100 SoC
* tag 'renesas-dt-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
ARM: dts: silk: Drop superfluous status update for frequency override
ARM: dts: alt: Drop superfluous status update for frequency override
ARM: dts: gose: Drop superfluous status update for frequency override
ARM: dts: porter: Drop superfluous status update for frequency override
ARM: dts: koelsch: Drop superfluous status updates for frequency overrides
ARM: dts: lager: Drop superfluous status update for frequency override
ARM: dts: marzen: Drop superfluous status update for frequency override
ARM: dts: bockw: Drop superfluous status update for frequency override
ARM: dts: porter: Always use status "okay" to enable devices
ARM: dts: r8a7793: Add INTC-SYS clock to device tree
ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7794: Add INTC-SYS clock to device tree
ARM: dts: r8a7792: Add INTC-SYS clock to device tree
ARM: dts: r8a7791: Add INTC-SYS clock to device tree
ARM: dts: r8a7790: Add INTC-SYS clock to device tree
ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
ARM: dts: r7s72100: Add watchdog timer
ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
...
Signed-off-by: Olof Johansson <olof@lixom.net>
The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.
With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.
Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Allow including of dtsi files in an architecture-independent manner.
Some dtsi files may be shared between architectures and one suggestion
was to have symlinks and let these includes get accessed via a
#include <arm64/foo.dtsi>
So add the necessary symlinks for arm32.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Allow including of dtsi files in an architecture-independent manner.
Some dtsi files may be shared between architectures and one suggestion
was to have symlinks and let these includes get accessed via a
#include <arm64/foo.dtsi>
So add the necessary symlinks for arm32.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds crypto hardware (SPU) to Northstar Plus device tree file.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Adds mailbox / PDC to NSP device tree. Needs new compatibility string
to differentiate from NS2 version.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Adding ethernet aliases. These are used, for example, by bootloaders,
to modify the MAC addresses in the device tree.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The i2c device tree entry should be disabled by default to match the
current convention in other device tree files. Similarily, enable it on
the XMC board, where it is being used.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add the EHCI and OHCI entries to the Northstar Plus device tree files.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add I2C support to the bcm5301x Device Tree. Since no driver changes
are needed to enable this hardware, only the device tree changes are
required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
ARM TWD timer allocated the register space for the WDT, so this patch
necessitated shrinking that. Also, the GIC masks were added for these.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[ 0.000000] GIC: PPI11 is secure or misconfigured
Changing them to being edge triggered corrects the issue
Suggested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add the dmas and dma-names properties to support HDMI audio.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYxS8BAAoJEEEQszewGV1zezUP/1caMyTzYJCUm5CB1tGRgvsT
upxm4vEszKMePeURxwReYfmk4FTH64XPgLy8N4hNcobYtBoPdcLPOqwA7JmICD8h
/vmkiIenhr/CWNpijUBjjpSYI/Fj9rhntKrk3sQuQoGkuGRYtJAIQ/+p2JeZiyCy
/IMIrfvP+ebWvDh3PEP20OT0eHI9+MWhUPfzOPuR53OBLIXhd7I+j5v+pXyWWBsP
qlBjeWGFpBQZzjPFKPC2eEbRidSIko1ZKM7kvWe8S3+d9DYGVN54sbamJaLby410
qG/lttpFiYEHIbUcwAJJfTuwcYNjv5auvgeebmRIThtozR73ycuLXu6oMdnCjxsA
bRsgaAHpSGzepoS0jJiZ2gKs+scm68YJXrewPP84mpchnaDT6ihTiT5Prj8S7m7q
q7X9h53ZT84AuqYzPko4bgZQLmhv7Fw+DAJ9418Y/tdrf+Ml/yIj+S+BtpHggq6V
KDKHYkLlv2NPL+/8FY/0pi+oEjw1VryHvEPFUert5eqYRsLDIiXKFKnCn/OFARct
Dn/4nzAkD6yJlN+0pbbrAERhgFTaQAb6tchG/yzpXLUwcZBIGw4xe8uTuWkap4PQ
7kQoRgaXhTpVIOQd9zReRclDQOdxAKzblePJtrTjdaLXDRjQs+6MMoeM3e7jLivt
O2IIviG3oQCs6F77KFJx
=MVt+
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Base patches for Gemini device trees:
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
* tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add watchdog to the Gemini
watchdog: add DT bindings for Cortina Gemini
ARM: dts: add a devicetree for Wiliboard WBD-222
ARM: dts: add a devicetree for Wiliboard WBD-111
ARM: dts: add a devicetree for Teltonika RUT1xx
ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B
ARM: dts: add device tree for Gemini SoC and SQ201
ARM: dts: add top-level DT bindings for Cortina Gemini
Signed-off-by: Olof Johansson <olof@lixom.net>
The scif_clk device node is already enabled in r8a7794.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk device node is already enabled in r8a7794.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk device node is already enabled in r8a7793.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The pcie_bus_clk device node is already enabled in r8a7791.dtsi, so
there is no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk and pcie_bus_clk device nodes are already enabled in
r8a7791.dtsi, so there is no need to update their statuses again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk device node is already enabled in r8a7790.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk device node is already enabled in r8a7779.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The scif_clk device node is already enabled in r8a7778.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
While status "ok" does work, the canonical form is "okay", so update the
few places that used the former.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always
on" PM Domain, so it can be power managed using that clock.
Note that currently the GIC-400 driver doesn't support module clocks nor
Runtime PM, so this must be handled as a critical clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull s390 fixes from Martin Schwidefsky:
- four patches to get the new cputime code in shape for s390
- add the new statx system call
- a few bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up statx system call
KVM: s390: Fix guest migration for huge guests resulting in panic
s390/ipl: always use load normal for CCW-type re-IPL
s390/timex: micro optimization for tod_to_ns
s390/cputime: provide archicture specific cputime_to_nsecs
s390/cputime: reset all accounting fields on fork
s390/cputime: remove last traces of cputime_t
s390: fix in-kernel program checks
s390/crypt: fix missing unlock in ctr_paes_crypt on error path
Pull x86 fixes from Thomas Gleixner:
- a fix for the kexec/purgatory regression which was introduced in the
merge window via an innocent sparse fix. We could have reverted that
commit, but on deeper inspection it turned out that the whole
machinery is neither documented nor robust. So a proper cleanup was
done instead
- the fix for the TLB flush issue which was discovered recently
- a simple typo fix for a reboot quirk
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tlb: Fix tlb flushing when lguest clears PGE
kexec, x86/purgatory: Unbreak it and clean it up
x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
Pull irq fixes from Thomas Gleixner:
- a workaround for a GIC erratum
- a missing stub function for CONFIG_IRQDOMAIN=n
- fixes for a couple of type inconsistencies
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Fix incorrect type of register size
irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065
irqdomain: Add empty irq_domain_check_msi_remap
irqchip/crossbar: Fix incorrect type of local variables
This devicetree is simply based on the board file in
arch/arm/mach-gemini/board-wbd222.c and contain the
equivalent platform data, mainly just moving the GPIOs
from the global numberspace to explicitly reference their
parent GPIO.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This devicetree is simply based on the board file in
arch/arm/mach-gemini/board-wbd111.c and contain the
equivalent platform data, mainly just moving the GPIOs
from the global numberspace to explicitly reference their
parent GPIO.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
