[ Upstream commit c202e2ebe1dc454ad54fd0018c023ec553d47284 ]
This error path leads to a Smatch warning:
drivers/net/wireless/ath/ath11k/mac.c:4269 ath11k_mac_op_start()
error: double unlocked '&ar->conf_mutex' (orig line 4251)
We're not holding the lock when we do the "goto err;" so it leads to a
double unlock. The fix is to hold the lock for a little longer.
Fixes: c83c500b55 ("ath11k: enable idle power save mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[kvalo@codeaurora.org: move also rcu_assign_pointer() call]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YBk4GoeE+yc0wlJH@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d30337da8677cd73cb19444436b311c13e57356f ]
Compiling with the clang integrated assembler warns about
a recently added instruction:
<instantiation>:14:13: error: unknown token in expression
ldr tmp1, =#0x00020010UL
arch/arm/mach-at91/pm_suspend.S:542:2: note: while in macro instantiation
at91_plla_enable
Remove the extra '#' character that is not used for the 'ldr'
instruction when doing an indirect load of a constant.
Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210204160129.2249394-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26df933d9b83ea668304dc4ec641d52ea1fc4091 ]
When the firmware rejects a frame (because station become asleep or
disconnected), the frame is re-queued in mac80211. However, the
re-queued frame was 8 bytes longer than the original one (the size of
the ICV for the encryption). So, when mac80211 try to send this frame
again, it is a little bigger than expected.
If the frame is re-queued secveral time it end with a skb_over_panic
because the skb buffer is not large enough.
Note it only happens when device acts as an AP and encryption is
enabled.
This patch more or less reverts the commit 049fde1304 ("staging: wfx:
drop useless field from struct wfx_tx_priv").
Fixes: 049fde1304 ("staging: wfx: drop useless field from struct wfx_tx_priv")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210208135254.399964-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67bc809752796acb2641ca343cad5b45eef31d7c ]
Storing a bogus i2c_client structure on the stack adds overhead and
causes a compile-time warning:
drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=]
void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param,
Change the implementation of handle_rpc_func_cmd_i2c_transfer() to
open-code the i2c_transfer() call, which makes it easier to read
and avoids the warning.
Fixes: c05210ab97 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9942c61fa60eda7cc8e42f04bd25b7d175876e ]
Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
subnes pc, lr, #4 @@ return, still have work to do
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
s3c24xx_spi_fiq_txrx:
There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.
Fixes: bec0806cfe ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efaa85cf2294d5e10a724e24356507eeb3836f72 ]
When version 2 of the PER_PLATFORM_ANT_GAIN_CMD was implemented, we
started copying the values from the command that we have stored into a
local instance. But we accidentally forgot to copy the enabled flag,
so in practice PPAG is never really enabled. Fix this by copying the
flag from our stored data a we should.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f4 ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210131201908.24d7bf754ad5.I0e8abc2b8747508b6118242533d68c856ca6dffb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f937ffc4686837d6c43dea80c6ade6cbd2940a ]
If ocmem probe fails for whatever reason, of_get_ocmem returned NULL.
Without this, users must check for both NULL and IS_ERR on the returned
pointer - which didn't happen in drivers/gpu/drm/msm/adreno/adreno_gpu.c
leading to a NULL pointer dereference.
Reviewed-by: Brian Masney <masneyb@onstation.org>
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20210130142349.53335-1-luca@z3ntu.xyz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de71a6cb4bf24d8993b9ca90d1ddb131b60251a1 ]
In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be
released.
Omit the labels “err_out” and “err_free_skb” in this function
implementation so that the desired exception handling code
would be directly specified in the affected if branches.
Fixes: a1c49c434e ("btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: Jupeng Zhong <zhongjupeng@yulong.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9d9bfcadfb43b856dbcf9419de75f7420d5a225 ]
The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.
Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.
[1] https://gitlab.nic.cz/turris/mox-boot-builder
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46ecdfc1830eaa40a11d7f832089c82b0e67ea96 ]
Split up the pins for each fan. This is needed in order to control them
Fixes: ced8025b56 ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28eb119c042e8d3420b577b5b3ea851a111e7b2d ]
This patch fixes the reference to the errata for both the mcp2517fd
and the mcp2518fd.
Fixes: f5b84dedf7 ("can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information")
Link: https://lore.kernel.org/r/20210128104644.2982125-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a16aa13574c8526beadfc9ae8cc9b66315fa2d ]
Commit
a7e1f67ed2 ("x86/msr: Filter MSR writes")
introduced a module parameter to disable writing to the MSR device file
and tainted the kernel upon writing. As MSR registers can be written by
the X86_IOC_WRMSR_REGS ioctl too, the same filtering and tainting should
be applied to the ioctl as well.
[ bp: Massage commit message and space out statements. ]
Fixes: a7e1f67ed2 ("x86/msr: Filter MSR writes")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210127122456.13939-1-misono.tomohiro@jp.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a9e38cabd80356ffb98c2c88fec528ea9644fd5 ]
With some USB network adapters, such as DM96xx, the following message
is seen for each maximum size receive packet.
dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length
This happens because the packet size requested by the driver is 1522
bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
receive 24*64 = 1536 bytes, and the chip does indeed send more than
1522 bytes of data. Since the event does not indicate an error condition,
the message is just noise. Demote it to debug level.
Fixes: 7359d482eb ("staging: HCD files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f74b68c61cbc4b2245022fcce038509333d63f6f ]
In some situations, the following error messages are reported.
dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown
dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021
This is sometimes followed by:
dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length
and then:
WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913
dwc2_assign_and_init_hc+0x98c/0x990
The warning suggests that an odd buffer address is to be used for DMA.
After an error is observed, the receive buffer may be full
(urb->actual_length >= urb->length). However, the urb is still left in
the queue unless three errors were observed in a row. When it is queued
again, the dwc2 hcd code translates this into a 1-block transfer.
If urb->actual_length (ie the total expected receive length) is not
DMA-aligned, the buffer pointer programmed into the chip will be
unaligned. This results in the observed warning.
To solve the problem, abort input transactions after an error with
unknown cause if the entire packet was already received. This may be
a bit drastic, but we don't really know why the transfer was aborted
even though the entire packet was received. Aborting the transfer in
this situation is less risky than accepting a potentially corrupted
packet.
With this patch in place, the 'ChHltd set' and 'trimming xfer length'
messages are still observed, but there are no more transfer attempts
with odd buffer addresses.
Fixes: 151d0cbdbe ("usb: dwc2: make the scheduler handle excessive NAKs better")
Cc: Boris ARZUR <boris@konbu.org>
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 415fa1c7305dedbb345e2cc8ac91769bc1c83f1a ]
The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.
Fixes: 56f5b1cff2 ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ]
We have gpio_86 wired internally to the bandgap thermal shutdown
interrupt on 4430 like we have it on 4460 according to the TRM.
This can be found easily by searching for TSHUT.
For some reason the thermal shutdown interrupt was never added
for 4430, let's add it. I believe this is needed for the thermal
shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call
orderly_poweroff().
Fixes: aa9bb4bb88 ("arm: dts: add omap4430 thermal data")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e9dd43cf327366388c8f146bccdc6322c0d999 ]
Call of_node_put() to decrement the reference count of the child node
child_np when jumping out of the loop body of
for_each_available_child_of_node(), which is a macro that increments and
decrements the reference count of child node. If the loop is broken, the
reference of the child node should be dropped manually.
Fixes: 5a7c81547c ("memory: ti-aemif: introduce AEMIF driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121090359.61763-1-bianpan2016@163.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a758c861ff290e39d4f1ee0aa5df0f0b9a45ee ]
Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.
Fixes: 3e13fa1e1f ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17ad4662595ea0c4fd7496b664523ef632e63349 ]
'am33xx_pm_rtc_setup()' allocates some resources that must be freed on the
error. Commit 2152fbbd47 ("soc: ti: pm33xx: Simplify RTC usage to prepare
to drop platform data") has introduced the use of these resources but has
only updated the remove function.
Fix the error handling path of the probe function now.
Fixes: 2152fbbd47 ("soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb33d8960dc7abdabc6fe599a30c2c99b082ef6 ]
These need to be < ARRAY_SIZE() instead of <= ARRAY_SIZE() to prevent
accessing one element beyond the end of the array.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: e9247e2ce5 ("soc: qcom: socinfo: fix printing of pmic_model")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+o85Z9lgkq3Nw@mwanda
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4863ef399a29cae3001b3fedfd2864e651055ba ]
Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
this issue prevented the ov8856 from probing properly as it did not respon
to I2C messages.
Fixes: d4919a4456 ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
camera nodes")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20201221100955.148584-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7de8681be2cde9f6953d3be1fa6ce05f9fe6e637 ]
As per the kernel doc for usb_ep_dequeue(), it states that "this
routine is asynchronous, that is, it may return before the completion
routine runs". And indeed since v5.0 the dwc3 gadget driver updated
its behavior to place dequeued requests on to a cancelled list to be
given back later after the endpoint is stopped.
The free_ep() was incorrectly assuming that a request was ready to
be freed after calling dequeue which results in a use-after-free
in dwc3 when it traverses its cancelled list. Fix this by moving
the usb_ep_free_request() call to the callback itself in case the
ep is disabled.
Fixes: eb9fecb9e6 ("usb: gadget: f_uac2: split out audio core")
Reported-and-tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-and-tested-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210118084642.322510-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dfaea3811f8b6a89a347e8da9ab862cdf3e30fe ]
ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e
The macros to classify different AML exception codes are broken. For
instance,
ACPI_ENV_EXCEPTION(Status)
will always evaluate to zero due to
#define AE_CODE_ENVIRONMENTAL 0x0000
#define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)
Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.
This commit fixes those checks.
Fixes: d46b6537f0 ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6433083f5930fdf52ad47c8c0459719c810dc89 ]
The gmac2phy is integrated with the PHY within the SoC. Any properties
related to this integration can be included in the .dtsi file, instead
of having board dts files specify them separately.
Add the clock_in_out property to specify the direction of the PHY clock.
This is the minimum required to have gmac2phy working on Linux. Other
examples include assigned-clocks, assigned-clock-rates, and
assigned-clock-parents properties, but the hardware default plus the
implementation requesting the appropriate clock rate also works.
Fixes: 9c4cc910fe ("ARM64: dts: rockchip: Add gmac2phy node support for rk3328")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05f456286fd489558c72a4711d22a5612c965685 ]
If 'cpufreq_register_driver()' fails, we must release the resources
allocated in 'brcm_avs_prepare_init()' as already done in the remove
function.
To do that, introduce a new function 'brcm_avs_prepare_uninit()' in order
to avoid code duplication. This also makes the code more readable (IMHO).
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3716a583fe0bbe3babf4ce260064a7fa13d6d989 ]
When the BMC150 accelerometer/magnetometer was added to the device tree,
the sensors were working without specifying any regulator supplies,
likely because the regulators were on by default and then never turned off.
For some reason, this is no longer the case for pm8916_l17, which prevents
the sensors from working in some cases.
Now that the bmc150_accel/bmc150_magn drivers can enable necessary
regulators, declare the necessary regulator supplies to make the sensors
work again.
Fixes: 079f81acf1 ("arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210111175358.97171-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 948c657cc45e8ce48cb533d4e2106145fa765759 ]
In contrast to the H6 (and later) manuals, the A64 datasheet does not
specify any limitations in the maximum possible frequency for eMMC
controllers.
However experimentation has found that a 150 MHz limit similar to other
SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist
for the MMC2 controller.
Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi.
The Pinebook seems to be the an odd exception, since it apparently seems
to work with 200 MHz as well, so overwrite this in its board .dts file.
Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works.
Fixes: 22be992fae ("arm64: allwinner: a64: Increase the MMC max frequency")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-7-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe6c487b9a1abc6197714ec5605716a5428cf03 ]
The H6 manual explicitly lists a frequency limit of 150 MHz for the bus
frequency of the MMC controllers. So far we had no explicit limits in the
DT, which limited eMMC to the spec defined frequencies, or whatever the
driver defines (both Linux and FreeBSD use 52 MHz here).
Put those maximum frequencies in the SoC .dtsi, to allow higher speed
modes (which still would need to be explicitly enabled, per board).
Tested with an eMMC using HS-200 on a Pine H64. Running at the spec'ed
200 MHz indeed fails with I/O errors, but 150 MHz seems to work stably.
Fixes: 8f54bd1595 ("arm64: allwinner: h6: add device tree nodes for MMC controllers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-6-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 941432d007689f3774646e41a1439228b6c6ee0e ]
The SD card on the SoPine SoM module is somewhat concealed, so was
originally defined as "non-removable".
However there is a working card-detect pin (tested on two different
SoM versions), and in certain SoM base boards it might be actually
accessible at runtime.
Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the
non-removable flag, even though the SD card slot is perfectly accessible
and usable there. (It turns out that just *my* board has a broken card
detect switch, so I originally thought CD wouldn't work on the LTS.)
Drop the "non-removable" flag to describe the SD card slot properly.
Fixes: c3904a2698 ("arm64: allwinner: a64: add DTSI file for SoPine SoM")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da2fb8457f71138d455cba82edec0d34f858e506 ]
In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
don't actually use it.
To avoid those issues, let's add this PHY link to the H6 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this.
This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).
Fixes: eabb3d424b ("arm64: dts: allwinner: h6: add USB2-related device nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-3-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc72570747e43335f4933a24dd74d5653639176a ]
In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
don't actually use it.
To avoid those issues, let's add this PHY link to the A64 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this. Remove the part from the Pinebook DTS which already had
this property.
This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).
Fixes: dc03a047df ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a643bff752dcf72a07e1b2ab2f8587e4f51118be ]
Add bpf_patch_call_args() prototype. This function is called from BPF verifier
and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler
warning about missing prototype in some kernel configurations.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025822884a4fd2d0af51dcf77ddc494e60c5ff63 ]
The timing-adjustment clock only has to be enabled when a) there is a
2ns RX delay configured using device-tree and b) the phy-mode indicates
that the RX delay should be enabled.
Only enable the RX delay if both are true, instead of (by accident) also
enabling it when there's the 2ns RX delay configured but the phy-mode
incicates that the RX delay is not used.
Fixes: 9308c47640 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 826e6faf49ae1eb065759a30832a2e34740bd8b1 ]
Unlike most MSM8916 boards, samsung-a5u uses WCN3660B instead of
WCN3620 to support the 5 GHz band additionally.
WCN3660B has similar requirements as WCN3620, but it needs the XO
clock to run at 48 MHz instead of 19.2 MHz. So far it was possible
to describe that configuration using the qcom,wcn3680 compatible.
However, as of commit 8490987bdb ("wcn36xx: Hook and identify RF_IRIS_WCN3680"),
the wcn36xx driver will now use the qcom,wcn3680 compatible
to enable functionality specific to WCN3680. In particular,
WCN3680 supports 802.11ac, which is not available in WCN3660B.
Use the new qcom,wcn3660b compatible to describe the chip properly.
Fixes: 0d70519991 ("arm64: dts: msm8916-samsung-a5u: Override iris compatible")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210106102134.59801-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88753cc19f087abe0d39644b844e67a59cfb5a3d ]
The recent change to the bulk transfer compat function missed the fact
the relevant ioctl command is VCHIQ_IOC_QUEUE_BULK_TRANSMIT32, not
VCHIQ_IOC_QUEUE_BULK_TRANSMIT, as any attempt to send a bulk block
to the VPU would have shown.
Fixes: a4367cd2b2 ("staging: vchiq: convert compat bulk transfer")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-3-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96ae327678eceabf455b11a88ba14ad540d4b046 ]
The addition of the local 'userdata' pointer to
vchiq_irq_queue_bulk_tx_rx omitted the case where neither BLOCKING nor
WAITING modes are used, in which case the value provided by the
caller is not returned to them as expected, but instead it is replaced
with a NULL. This lack of a suitable context may cause the application
to crash or otherwise malfunction.
Fixes: 4184da4f31 ("staging: vchiq: fix __user annotations")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-2-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71f8e707557b9bc25dc90a59a752528d4e7c1cbf ]
When __le32_to_cpu() fails, qca_memdump should be freed
just like when vmalloc() fails.
Fixes: d841502c79 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>