This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.
Testing of the board this was originally written for seems to agree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Training/Untraining will be hooked up to the routing logic, which
doesn't allow us to pass in a data rate.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These exist to give NVKM information on the set of display paths that
the DD needs to be active at any given time.
Previously, the supervisor attempted to determine this solely from OR
state, but there's a few configurations where this information on its
own isn't enough to determine the specific display paths in question:
- ANX9805, where the PIOR protocol for both DP and TMDS is TMDS.
- On a device using DCB Switched Outputs.
- On GM20x and newer, with a crossbar between the SOR and macro links.
After this commit, the DD tells NVKM *exactly* which display path it's
attempting a modeset on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All of the necessary hw-specific logic is now handled at the output
resource level, so all of this can go away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Also removes the user-facing methods to these controls, as they're not
currently utilised by the DD anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially (unless the link becomes unstable and needs to be
re-trained) gives us a single entry-point to link training, during
supervisor handling, where we can ensure all routing is up to date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will limit link training to only when the sink is
meant to be displaying an image.
We still need IRQs enabled even when the link isn't trained (for MST
messages), but don't want to train the link unnecessarily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The aim here is to protect the OR against locking up when something
unexpected happens (such as the display disappearing during modeset,
or the DD misbehaving).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This struct doesn't hold link configuration data anymore, so we can
limit its use to internal DP training (anx9805 handles training for
external DP).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This hasn't been used since atomic.
We may want to re-implement "fast" DPMS at some point, but for now,
this just gets in the way.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially replicates our current behaviour in a way that's
compatible with the new model that's emerging, so that we're able
to start porting the hw-specific functions to it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming commits make supervisor handling share code between the NV50
and GF119 implementations. Because of this, and a few other cleanups,
we need to allow some additional customisation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In order to properly support the SOR -> SOR + pad macro separation
that occurred with GM20x GPUs, we need to separate OR handling out
of the output path code.
This will be used as the base to support ORs (DAC, SOR, PIOR).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is to allow hw-specific code to instantiate output resources first,
so we can cull unsupported output paths based on them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not all users of nvkm_output_dp have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
This also modifies the debug level of some messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This isn't technically "output", but, "display/output path".
Not all users of nvkm_output have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming changes to split OR from output path drastically change the
placement of various operations.
In order to make the real changes clearer, do the moving around part
ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As of DCB 4.1, these are not the same thing.
Compatibility temporarily in place until callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We already have a subdev pointer, from which we can locate the device's
BIOS subdev. No need for a separate pointer.
Structure/callers not updated yet, as I want to batch more changes and
only touch the callers once.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_timer_alarm() already handles this as part of protecting against
callers passing in no timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I only saw those values inside the vbios: 0xff, 0xfd, 0xfc, 0xfa for valid
rails.
No idea what the lower value does, but at least we get power readings on
a lot of Fermi GPUs with that.
v2: add missing parentheses
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is according to what we have in nvbios.
Fixes "ERROR: Can't get value of subfeature in0_min: Can't read" errors
in sensors for some GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic") InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HDMI InfoFrames are passed to NVKM as bags of bytes, but the
hardware needs them to be packed into words. Rather than having
four (or more) copies of the packing logic introduce a single copy
now, in a central place.
We currently need these for AVI and Vendor InfoFrames, but we may
also expect to need them for Audio InfoFrames at some point.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The nouveau driver, in the Linux 3.7 days, used to try and set the
AVI InfoFrame based on the selected display mode. These days, it
uses a fixed set of InfoFrames. Start to correct that, by
providing a mechanism whereby InfoFrame data may be passed to the
NVKM functions that do the actual configuration.
At this point, only establish the new parameters and their parsing,
don't actually use the data anywhere yet (since it's not supplied
anywhere).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Presumably we can never actually hit this return, but static checkers
complain that we should unlock before we return.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The last goto looks spurious because it releases less resources than the
previous one.
Also free 'img->sig' if 'ls_ucode_img_build()' fails.
Fixes: 9d896f3e41 ("drm/nouveau/secboot: abstract LS firmware loading functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These were ineffective due to touching the list without the alarm lock,
but should no longer be required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm. This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).
Turns out, it's not so difficult after all. Go figure ;)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.
Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.
Fix this by checking again after we update HW.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
object->engine cannot be NULL, it's either valid, or an error pointer.
This particular condition shouldn't actually be possible, but just in
case, we'll keep it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This reg has moved on Pascal, and causes a bus fault.
We never use the value anyway, so just remove the read.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A missing u64 cast causes a 32-Bit wraparound from
4096 MiB to 0 MiB and therefore total 0 MiB VRAM detected
if card has 4096 Mib per FBP.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The error return code PTR_ERR(mc) is always 0 since mc is
equal to 0 in this error handling case.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's power is managed by generic PM domains, so it does not require a
VDD regulator. Add this option into the chip function structure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GR is similar to GP100, with a few unavailable registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B requires a specific initialization sequence due to the absence of
devinit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's MC is compatible with GP100's, but engines need to be explicitly
put out of ELPG during init.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FB is largely compatible with the GP100 implementation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FIFO is similar to GP100's, but only allows 512 channels.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The GP10B firmware is very close to GM20B's. The only difference is that
it supports booting multiple falcons. In order to avoid having too much
functions and structures shared, implement its support in the same
source file as GM20B firmware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's secboot is largely similar to GM20B's. Only differences are MC
base address and the fact that GPCCS is also securely managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow the MC base address to be specified as an argument for the WPR
region reading function. GP10B uses a different address layout as GM20B,
so this is necessary. Also export the function to be used by GP10B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The LS firmware post-run hook is the right place to start said LS
firmware. Moving it here also allows to remove special handling in the
ACR code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A LS post-run hook can meet an error meaning the failure of secure boot.
Make sure this can be reported.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having access to the secboot instance loading a LS firmware can be
useful to LS firmware handlers. At least more useful than just having an
out-of-context subdev pointer.
GP10B's firmware will also need to know the WPR address, which can be
obtained from the secboot instance.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Change the secboot and msgqueue interfaces to take a mask of falcons to
reset instead of a single falcon. The GP10B firmware interface requires
FECS and GPCCS to be booted in a single firmware command.
For firmwares that only support single falcon boot, it is trivial to
loop over the mask and boot each falcons individually.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The gk20a implementation of instance memory uses vmap()/vunmap() to map
memory regions into the kernel's virtual address space. These functions
may sleep, so protecting them by a spin lock is not safe. This triggers
a warning if the DEBUG_ATOMIC_SLEEP Kconfig option is enabled. Fix this
by using a mutex instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP106 implementation.
Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.
Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The msgqueue pointer validity should be checked by its owner, not by the
msgqueue code itself to avoid this situation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We were returning PTR_ERR() on a NULL pointer, which obviously won't
work. nvkm_engine_ref() will return an error in case something went
wrong.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Re-architecture of the code to handle proprietary fw, more abstracted
to support the multitude of differences that NVIDIA introduce
- Support in the said code for GP10x ACR and GR fw, giving acceleration
support \o/
- Fix for GTX 970 GPUs that are in an odd MMU configuration
* 'linux-4.12' of git://github.com/skeggsb/linux: (60 commits)
drm/nouveau/fb/gf100-: rework ram detection
drm/nouveau/fb/gm200: split ram implementation from gm107
drm/nouveau/fb/gf108: split implementation from gf100
drm/nouveau/fb/gf100-: modify constructors to allow more customisation
drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
drm/nouveau/i2c/g94-: return REPLY_M value on reads
drm/nouveau/i2c: modify aux interface to return length actually transferred
drm/nouveau/gp10x: enable secboot and GR
drm/nouveau/gr/gp102: initial support
drm/nouveau/falcon: support for gp10x msgqueue
drm/nouveau/secboot: add gp102/gp104/gp106/gp107 support
drm/nouveau/secboot: put HS code loading code into own file
drm/nouveau/secboot: support for r375 ACR
drm/nouveau/secboot: support for r367 ACR
drm/nouveau/secboot: support for r364 ACR
drm/nouveau/secboot: workaround bug when starting SEC2 firmware
drm/nouveau/secboot: support standard NVIDIA HS binaries
drm/nouveau/secboot: support for unload blob bootloader
drm/nouveau/secboot: let callers interpret return value of blobs
drm/nouveau/secboot: support for different load and unload falcons
...
This commit reworks the RAM detection algorithm, using RAM-per-LTC to
determine whether a board has a mixed-memory configuration instead of
using RAM-per-FBPA. I'm not certain the algorithm is perfect, but it
should handle all currently known configurations in the very least.
This should fix GTX 970 boards with 4GiB of RAM where the last 512MiB
isn't fully accessible, as well as only detecting half the VRAM on
GF108 boards.
As a nice side-effect, GP10x memory detection now reuses the majority
of the code from earlier chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF108/GM107 implementations will want slightly different functions for
the upcoming RAM detection improvements.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This value represents the actual number of bytes recieved on the AUX
channel as the result of a read transaction.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Apparently sinks are allows to respond with ACK even if they didn't
fully complete a transaction... It seems like a missed opportunity
for DEFER to me, but what do I know :)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All the bricks are in place for secure boot to be enabled. This in turn
makes GR usable so enable them all.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Differences from GP100:
- 3 PPCs/GPC.
- Another random reg to calculate/write.
- Attrib CB setup a little different.
- PascalB
- PascalComputeB
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for the msgqueue firmware used to process SEC2 commands
for gp10x chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These gp10x chips are supporting using (roughly) the same firmware.
Compared to previous secure chips, ACR runs on SEC2 and so does the
low-secure msgqueue.
ACR for these chips is based on r367.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We will also need to load HS blobs outside of acr_r352 (for instance, to
run the NVDEC VPR scrubber), so make this code reusable.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
r375 ACR uses a unified bootloader descriptor for the GR and PMU
firmwares.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
r367 uses a different hsflcn_desc layout and LS firmware signature
format, requiring a rewrite of some functions.
It also makes use of the shadow region, and uses SEC as the boot falcon.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
r364 is similar to r361, but uses a different hsflcn_desc structure to
introduce the shadow region address (even though it is not yet used by
this version).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For some unknown reason the LS SEC2 firmware needs to be started twice
to operate. Detect and address that condition.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I had the brilliant idea to "improve" the binary format by removing
a useless indirection in the HS binary files. In the end it just
makes things more complicated than they ought to be as NVIDIA-provided
files need to be adapted. Since the format used can be identified by the
header, support both.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the load and unload falcons are different, then a different
bootloader must also be used. Support this case.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since the HS blobs are provided and signed by NVIDIA, we cannot expect
always-consistent behavior. In this case, on GP10x the unload blob may
return 0x1d even though things have run perfectly well. This behavior
has been confirmed by NVIDIA.
So let the callers of the run_blob() hook receive the blob return's
value (a positive integer) and decide what it means. This allows us to
workaround the 0x1d code instead of issuing an error.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On some secure boot instances (e.g. gp10x) the load and unload blobs do
not run on the same falcon. Support this case by introducing a new
member to the ACR structure and making related functions take the falcon
to use as an argument instead of assuming the boot falcon is to be used.
The rule is that the load blob can be run on either the SEC or PMU
falcons, but the unload blob must be always run on PMU.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Share elements of r361 that will be reused in other ACRs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for running the ACR binary on the SEC falcon.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The start address used for secure blobs is not unique to the ACR, but
rather blob-dependent. Remove the unique member stored in the ACR
structure and make the load function return the start address for the
current blob instead.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
ACR firmware from r364 on need a shadow region for the ACR to copy the
WPR region into. Add a flag to indicate that a shadow region is required
and manage memory allocations accordingly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for running a msgqueue on the SEC2 falcon.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On SEC, DMEM is unaccessible by the CPU when the falcon is running in LS
mode. This makes communication with the firmware using DMEM impossible.
For this purpose, a new kind of memory (EMEM) has been added. It works
similarly to DMEM, with the difference that its address space starts at
0x1000000. For this reason, it makes sense to treat it like a special
case of DMEM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All falcons have their FBIF registers starting at offset 0x600, with the
exception of the PMU and NVENC engines.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not all falcons have a debug register, and it is not always found at the
same offset.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
SEC2 is the name given by NVIDIA to the SEC engine post-Fermi (reasons
unknown). Even though it shares the same address range as SEC, its usage
is quite different and this justifies a new engine. Add this engine and
make TOP use it all post-TOP devices should use this implementation and
not the older SEC.
Also quickly add the short gp102 implementation which will be used for
falcon booting purposes.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gp10x' secure boot requires a blob to be run on NVDEC. Expose the falcon
through a dummy device.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reading registers at device construction time can be harmful, as there
is no guarantee the underlying engine will be up, or in its runtime
configuration. Defer register reading to the oneinit() hook and update
users accordingly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Both registers allow to bind a new context, but NXTCTX will work on all
falcons, while legacy NEW_INSTBLK is reserved to PMU.
After setting NXTCTX we trigger a context switch by writing 0x090 and
0x0a4.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Enable the PMU firmware in gm20b, managed by secure boot.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gm20b PMU firmware is driven by a msgqueue, so connect relevant PMU
hooks to their msgqueue counterparts.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The ACR firmware may return no error but fail nonetheless. Such cases
can be detected by verifying that the WPR region has been properly set
in FB. If this is not the case, this is an error, but the unload
firmware should still not be run.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
PMU support has been enabled for r352 ACR, but it must remain optional
if we want to preserve existing user-space that do not include it. Allow
ACR to be instanciated with a list of optional LS falcons, that will not
produce a fatal error if their firmware is not loaded. Also change the
secure boot bootstrap logic to be able to fall back to legacy behavior
if it turns out the boot falcon's LS firmware cannot be loaded.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add the PMU bootloader generator and PMU LS ops that will enable proper
PMU operation if the PMU falcon is designated as managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adapt secboot's behavior if a PMU firmware is present, in particular
the way LS falcons are reset. Without PMU firmware, secboot needs to be
performed again from scratch so all LS falcons are reset. With PMU
firmware, we can ask the PMU's ACR unit to reset a specific falcon
through a PMU message.
As we must preserve the old behavior to avoid breaking user-space, add a
few conditionals to the way falcons are reset.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow secboot to load a LS PMU firmware. LS PMU is one instance of
firmwares based on the message queue mechanism, which is also used for
other firmwares like SEC, so name its source file accordingly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA-provided PMU firmware is controlled by a msgqueue. Add a member
to the PMU structure as well as the required cleanup code if this
feature is used.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for the msgqueue firmware used to process PMU commands for
gm20b.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A message queue firmware implements a specific protocol allowing the
host to send "commands" to a falcon, and the falcon to reply using
"messages". This patch implements the common part of this protocol and
defines the interface that the host can use.
Due to the way the firmware is developped internally at NVIDIA (where
kernel driver and firmware evolve in lockstep), firmwares taken at
different points in time can have frustratingly subtle differences that
must be taken into account. This code is architectured to make
implementing such differences as easy as possible.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add the ability for LS firmwares to declare a post-run hook that is
invoked right after the HS firmware is executed. This allows them to
e.g. write some initialization data into the falcon's DMEM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As different firmare versions use different HS descriptor formats, we
need to abstract this part as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This structure does not need to be shared anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows the bootloader descriptor generation code to not rely on
specialized ls_ucode_img structures, making it reusable in other
instances.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Offsets were not properly computed. This went unnoticed because we are
only using one app for now.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Using 32-bit integers would trim the WPR address if it is allocated above 4GB.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A WPR region smaller than 256K will result in secure boot failure.
Adjust the minimal size.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The WPR address parameter of the ls_write_wpr hook was defined as a u32,
which will very likely overflow on boards with more than 4GB VRAM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Check at contruction time that we have support for all the LS firmwares
asked by the caller.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remove a leftover that became obsolete with the falcon interface.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
DMEM registers are replicated with a stride of 8 bytes.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The falcon library may be used concurrently, especially after the
introduction of the msgqueue interface. Make it safe to use it that way.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is not used currently, but is added for the sake of completeness.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some PMU implementations (in particular the ones managed by secure
boot) may not have a reset() hook. Make sure we don't crash in that
case.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make nvkm_secboot_falcon_name publicly visible as other subdevs will
need to use it for debug messages.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ideally we'd be able to keep these at a more obvious error level, as
they're a good indication of us doing something wrong.
However, NVIDIA's FECS/GPCCS firmware touches registers that trigger
priv ring faults, and we can't do anything to fix that ourselves due
to the need for them to be signed by NVIDIA.
This issue was reported a while back, but hasn't been fixed, so, for
now we will hide the messages to prevent spamming Optimus users with
messages whenever the NVIDIA GPU is powered off and on again.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/76355db47b31668bb64d996865ceee53bd66b11f.1488285953.git.joe@perches.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
704a6c008b7942bb7f30bb43d2a6bcad7f543662 broke pci msi rearm for g92 GPUs.
g92 needs the nv46_pci_msi_rearm, where g94+ gpus used nv40_pci_msi_rearm.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
This seems to be absolutely necessary for a lot of NV40.
Reported-by: gsgf on IRC/freenode
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: Set entry to 0xff if not found
Add cap entry for ver 0x30 tables
Rework to fix memory leak
v3: More error checks
Simplify check for invalid entries
v4: disable for ver 0x10 for now
move assignments after the second last return
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Greatly improves the chances of recovering the GPU from a CTXSW_TIMEOUT.
Tested with piglit's arb_shader_image_load_store-atomicity, which causes
GR to hang in such a way that recovery failed (CTXSW_TIMEOUT continually
re-triggers).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will serve as a basis for implementing some improvements to how
we recover the GPU from channel errors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The previous commit simply changes the interface, but should result in
the same behaviour as previously. This commit has been split out from
it as it can result in a different channel being selected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
FIFO gives us load/save/switch status, and we need to be able to determine
which direction a "switch" is failing during channel recovery.
In order to do this, we apparently need to query the engine itself.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are instances (such as non-recoverable GPU page faults) where
NVKM decides that a channel's context is no longer viable, and will
be removed from the runlist.
This commit notifies the owner of the channel when this happens, so
it has the opportunity to take some kind of recovery action instead
of hanging.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested on a G92, seems to work. Confirmed by 8 mmiotraces.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We never have any need for a double-linked list here, and as there's
generally a large number of these objects, replace it with a single-
linked list in order to save some memory.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We want a supervisor client of NVKM (such as the DRM) to be able to
allow sharing of resources (such as memory objects) between clients.
To allow this, the supervisor creates all its clients as children of
itself, and will use an upcoming ioctl to permit sharing.
Currently it's not possible for indirect clients to use subclients.
Supporting this will require an additional field in the main ioctl.
This isn't important currently, but will need to be fixed for virt.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The fields were already in struct nvkm_oclass for some reason (probably
as an accidental left-over).
Preparation for supporting subclients.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_object::client refers to the client that created the object, which,
is currently always the same as the ioctl caller.
Upcoming patches introduce the concept of subclients, where a parent is
able to access the object trees of its children, making the above no
longer true.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It turns out we have a nice and convenient way of looking up a specific
object type already, by using the func pointer as a key.
This will be used to remove the separate object trees for each type we
need to be able to search for.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The halt interrupt must be cleared after ACR is run, otherwise the LS
PMU firmware will not be able to run.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the PMU firmware is present, the falcons it manages need to have
the lazy-bootstrap flag of their WPR header set so the ACR does not boot
them. Add support for this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Generate the WPR descriptor closer to what RM does. In particular, set
the expected masks, and only set the ucode members on Tegra.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
