The MMC/SD controllers on am65x and j721e don't in fact detect the write
protect line as inverted. No issues were detected because of this
because the sdwp line is not connected on any of the evms. Fix this by
removing the flag.
Fixes: 1accbced1c ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200108143301.1929-2-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cortex-A55 erratum 1530923 allows TLB entries to be allocated as a
result of a speculative AT instruction. This may happen in the middle of
a guest world switch while the relevant VMSA configuration is in an
inconsistent state, leading to erroneous content being allocated into
TLBs.
The same workaround as is used for Cortex-A76 erratum 1165522
(WORKAROUND_SPECULATIVE_AT_VHE) can be used here. Note that this
mandates the use of VHE on affected parts.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
To match SPECULATIVE_AT_VHE let's also have a generic name for the NVHE
variant.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Cortex-A55 is affected by a similar erratum, so rename the existing
workaround for errarum 1165522 so it can be used for both errata.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Buffered read in fuse normally goes via:
-> generic_file_buffered_read()
-> fuse_readpages()
-> fuse_send_readpages()
->fuse_simple_request() [called since v5.4]
In the case of a read request, fuse_simple_request() will return a
non-negative bytecount on success or a negative error value. A positive
bytecount was taken to be an error and the PG_error flag set on the page.
This resulted in generic_file_buffered_read() falling back to ->readpage(),
which would repeat the read request and succeed. Because of the repeated
read succeeding the bug was not detected with regression tests or other use
cases.
The FTP module in GVFS however fails the second read due to the
non-seekable nature of FTP downloads.
Fix by checking and ignoring positive return value from
fuse_simple_request().
Reported-by: Ondrej Holy <oholy@redhat.com>
Link: https://gitlab.gnome.org/GNOME/gvfs/issues/441
Fixes: 134831e36b ("fuse: convert readpages to simple api")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A previous commit moved the locking for the async sqthread, but didn't
take into account that the io-wq workers still need it. We can't use
req->in_async for this anymore as both the sqthread and io-wq workers
set it, gate the need for locking on io_wq_current_is_worker() instead.
Fixes: 8a4955ff1c ("io_uring: sqthread should grab ctx->uring_lock for submissions")
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->result is cleared when io_issue_sqe() calls io_read/write_pre()
routines. Those routines however are not called when the sqe
argument is NULL, which is the case when io_issue_sqe() is called from
io_wq_submit_work(). io_issue_sqe() may then examine a stale result if
a polled request had previously failed with -EAGAIN:
if (ctx->flags & IORING_SETUP_IOPOLL) {
if (req->result == -EAGAIN)
return -EAGAIN;
io_iopoll_req_issued(req);
}
and in turn cause a subsequently completed request to be re-issued in
io_wq_submit_work().
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tom Hatskevich reported that we look up "iocp" then, in the called
functions we do a second copy_from_user() and look it up again.
The problem that could cause is:
drivers/message/fusion/mptctl.c
674 /* All of these commands require an interrupt or
675 * are unknown/illegal.
676 */
677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
^^^^
We take this lock.
678 return ret;
679
680 if (cmd == MPTFWDOWNLOAD)
681 ret = mptctl_fw_download(arg);
^^^
Then the user memory changes and we look up "iocp" again but a different
one so now we are holding the incorrect lock and have a race condition.
682 else if (cmd == MPTCOMMAND)
683 ret = mptctl_mpt_command(arg);
The security impact of this bug is not as bad as it could have been
because these operations are all privileged and root already has
enormous destructive power. But it's still worth fixing.
This patch passes the "iocp" pointer to the functions to avoid the
second lookup. That deletes 100 lines of code from the driver so
it's a nice clean up as well.
Link: https://lore.kernel.org/r/20200114123414.GA7957@kadam
Reported-by: Tom Hatskevich <tom2001tom.23@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware
queue and CPU queue") introduced a regression for disks attached to
IDE. For these disks the host VSP only offers one VMBUS channel. Setting
multiple queues can overload the VMBUS channel and result in performance
drop for high queue depth workload on system with large number of CPUs.
Fix it by leaving the number of hardware queues to 1 (default value) for
IDE disks.
Fixes: 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue")
Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc -O3 warns that some local variables are not properly initialized:
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[0] = *a0;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
u64 a0, a1;
^~
Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.
Use an array of two u64 variables where needed to make it work correctly.
I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.
Fixes: 5df6d737dd ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The code in secondary_park is currently placed in the .init section. The
kernel reclaims and clears this code when it finishes booting. That
causes the cores parked in it to go to somewhere unpredictable, so we
move this function out of init to make sure the cores stay looping there.
The instruction bgeu a0, t0, .Lsecondary_park may have "a relocation
truncated to fit" issue during linking time. It is because that sections
are too far to jump. Let's use tail to jump to the .Lsecondary_park.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup.patel@sifive.com>
Cc: Andreas Schwab <schwab@suse.de>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
read_current_link_settings_on_detect() on eDP 1.4+ may use the
edp_supported_link_rates table which is set up by
detect_edp_sink_caps(), so that function needs to be called first.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Martin Leung <martin.leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Update mmSDMA0_UTCL1_WATERMK golden setting for renoir.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Fastabend says:
====================
To date our usage of sockmap/tls has been fairly simple, the BPF programs
did only well-defined pop, push, pull and apply/cork operations.
Now that we started to push more complex programs into sockmap we uncovered
a series of issues addressed here. Further OpenSSL3.0 version should be
released soon with kTLS support so its important to get any remaining
issues on BPF and kTLS support resolved.
Additionally, I have a patch under development to allow sockmap to be
enabled/disabled at runtime for Cilium endpoints. This allows us to stress
the map insert/delete with kTLS more than previously where Cilium only
added the socket to the map when it entered ESTABLISHED state and never
touched it from the control path side again relying on the sockets own
close() hook to remove it.
To test I have a set of test cases in test_sockmap.c that expose these
issues. Once we get fixes here merged and in bpf-next I'll submit the
tests to bpf-next tree to ensure we don't regress again. Also I've run
these patches in the Cilium CI with OpenSSL (master branch) this will
run tools such as netperf, ab, wrk2, curl, etc. to get a broad set of
testing.
I'm aware of two more issues that we are working to resolve in another
couple (probably two) patches. First we see an auth tag corruption in
kTLS when sending small 1byte chunks under stress. I've not pinned this
down yet. But, guessing because its under 1B stress tests it must be
some error path being triggered. And second we need to ensure BPF RX
programs are not skipped when kTLS ULP is loaded. This breaks some of the
sockmap selftests when running with kTLS. I'll send a follow up for this.
v2: I dropped a patch that added !0 size check in tls_push_record
this originated from a panic I caught awhile ago with a trace
in the crypto stack. But I can not reproduce it anymore so will
dig into that and send another patch later if needed. Anyways
after a bit of thought it would be nicer if tls/crypto/bpf didn't
require special case handling for the !0 size.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When user returns SK_DROP we need to reset the number of copied bytes
to indicate to the user the bytes were dropped and not sent. If we
don't reset the copied arg sendmsg will return as if those bytes were
copied giving the user a positive return value.
This works as expected today except in the case where the user also
pops bytes. In the pop case the sg.size is reduced but we don't correctly
account for this when copied bytes is reset. The popped bytes are not
accounted for and we return a small positive value potentially confusing
the user.
The reason this happens is due to a typo where we do the wrong comparison
when accounting for pop bytes. In this fix notice the if/else is not
needed and that we have a similar problem if we push data except its not
visible to the user because if delta is larger the sg.size we return a
negative value so it appears as an error regardless.
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
Its possible through a set of push, pop, apply helper calls to construct
a skmsg, which is just a ring of scatterlist elements, with the start
value larger than the end value. For example,
end start
|_0_|_1_| ... |_n_|_n+1_|
Where end points at 1 and start points and n so that valid elements is
the set {n, n+1, 0, 1}.
Currently, because we don't build the correct chain only {n, n+1} will
be sent. This adds a check and sg_chain call to correctly submit the
above to the crypto and tls send path.
Fixes: d3b18ad31f ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
It is possible to build a plaintext buffer using push helper that is larger
than the allocated encrypt buffer. When this record is pushed to crypto
layers this can result in a NULL pointer dereference because the crypto
API expects the encrypt buffer is large enough to fit the plaintext
buffer. Kernel splat below.
To resolve catch the cases this can happen and split the buffer into two
records to send individually. Unfortunately, there is still one case to
handle where the split creates a zero sized buffer. In this case we merge
the buffers and unmark the split. This happens when apply is zero and user
pushed data beyond encrypt buffer. This fixes the original case as well
because the split allocated an encrypt buffer larger than the plaintext
buffer and the merge simply moves the pointers around so we now have
a reference to the new (larger) encrypt buffer.
Perhaps its not ideal but it seems the best solution for a fixes branch
and avoids handling these two cases, (a) apply that needs split and (b)
non apply case. The are edge cases anyways so optimizing them seems not
necessary unless someone wants later in next branches.
[ 306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008
[...]
[ 306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0
[...]
[ 306.770350] Call Trace:
[ 306.770956] scatterwalk_map_and_copy+0x6c/0x80
[ 306.772026] gcm_enc_copy_hash+0x4b/0x50
[ 306.772925] gcm_hash_crypt_remain_continue+0xef/0x110
[ 306.774138] gcm_hash_crypt_continue+0xa1/0xb0
[ 306.775103] ? gcm_hash_crypt_continue+0xa1/0xb0
[ 306.776103] gcm_hash_assoc_remain_continue+0x94/0xa0
[ 306.777170] gcm_hash_assoc_continue+0x9d/0xb0
[ 306.778239] gcm_hash_init_continue+0x8f/0xa0
[ 306.779121] gcm_hash+0x73/0x80
[ 306.779762] gcm_encrypt_continue+0x6d/0x80
[ 306.780582] crypto_gcm_encrypt+0xcb/0xe0
[ 306.781474] crypto_aead_encrypt+0x1f/0x30
[ 306.782353] tls_push_record+0x3b9/0xb20 [tls]
[ 306.783314] ? sk_psock_msg_verdict+0x199/0x300
[ 306.784287] bpf_exec_tx_verdict+0x3f2/0x680 [tls]
[ 306.785357] tls_sw_sendmsg+0x4a3/0x6a0 [tls]
test_sockmap test signature to trigger bug,
[TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,):
Fixes: d3b18ad31f ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com
Leaving an incorrect end mark in place when passing to crypto
layer will cause crypto layer to stop processing data before
all data is encrypted. To fix clear the end mark on push
data instead of expecting users of the helper to clear the
mark value after the fact.
This happens when we push data into the middle of a skmsg and
have room for it so we don't do a set of copies that already
clear the end flag.
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-6-john.fastabend@gmail.com
In the push, pull, and pop helpers operating on skmsg objects to make
data writable or insert/remove data we use this bounds check to ensure
specified data is valid,
/* Bounds checks: start and pop must be inside message */
if (start >= offset + l || last >= msg->sg.size)
return -EINVAL;
The problem here is offset has already included the length of the
current element the 'l' above. So start could be past the end of
the scatterlist element in the case where start also points into an
offset on the last skmsg element.
To fix do the accounting slightly different by adding the length of
the previous entry to offset at the start of the iteration. And
ensure its initialized to zero so that the first iteration does
nothing.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-5-john.fastabend@gmail.com
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state
and call tcp_update_ulp() to push updates to TLS ULP on top. However, we
don't push the write_space callback up and instead simply overwrite the
op with the psock stored previous op. This may or may not be correct so
to ensure we don't overwrite the TLS write space hook pass this field to
the ULP and have it fixup the ctx.
This completes a previous fix that pushed the ops through to the ULP
but at the time missed doing this for write_space, presumably because
write_space TLS hook was added around the same time.
Fixes: 95fa145479 ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
The sock_map_free() and sock_hash_free() paths used to delete sockmap
and sockhash maps walk the maps and destroy psock and bpf state associated
with the socks in the map. When done the socks no longer have BPF programs
attached and will function normally. This can happen while the socks in
the map are still "live" meaning data may be sent/received during the walk.
Currently, though we don't take the sock_lock when the psock and bpf state
is removed through this path. Specifically, this means we can be writing
into the ops structure pointers such as sendmsg, sendpage, recvmsg, etc.
while they are also being called from the networking side. This is not
safe, we never used proper READ_ONCE/WRITE_ONCE semantics here if we
believed it was safe. Further its not clear to me its even a good idea
to try and do this on "live" sockets while networking side might also
be using the socket. Instead of trying to reason about using the socks
from both sides lets realize that every use case I'm aware of rarely
deletes maps, in fact kubernetes/Cilium case builds map at init and
never tears it down except on errors. So lets do the simple fix and
grab sock lock.
This patch wraps sock deletes from maps in sock lock and adds some
annotations so we catch any other cases easier.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-3-john.fastabend@gmail.com
When a sockmap is free'd and a socket in the map is enabled with tls
we tear down the bpf context on the socket, the psock struct and state,
and then call tcp_update_ulp(). The tcp_update_ulp() call is to inform
the tls stack it needs to update its saved sock ops so that when the tls
socket is later destroyed it doesn't try to call the now destroyed psock
hooks.
This is about keeping stacked ULPs in good shape so they always have
the right set of stacked ops.
However, recently unhash() hook was removed from TLS side. But, the
sockmap/bpf side is not doing any extra work to update the unhash op
when is torn down instead expecting TLS side to manage it. So both
TLS and sockmap believe the other side is managing the op and instead
no one updates the hook so it continues to point at tcp_bpf_unhash().
When unhash hook is called we call tcp_bpf_unhash() which detects the
psock has already been destroyed and calls sk->sk_prot_unhash() which
calls tcp_bpf_unhash() yet again and so on looping and hanging the core.
To fix have sockmap tear down logic fixup the stale pointer.
Fixes: 5d92e631b8 ("net/tls: partially revert fix transition through disconnect with close")
Reported-by: syzbot+83979935eb6304f8cd46@syzkaller.appspotmail.com
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-2-john.fastabend@gmail.com
To account for parts of the chip that are "harvested" (disabled) due to
silicon flaws, caches on some AMD GPUs must be initialized before ATS is
enabled.
ATS is normally enabled by the IOMMU driver before the GPU driver loads, so
this cache initialization would have to be done in a quirk, but that's too
complex to be practical.
For Navi14 (device ID 0x7340), this initialization is done by the VBIOS,
but apparently some boards went to production with an older VBIOS that
doesn't do it. Disable ATS for those boards.
Link: https://lore.kernel.org/r/20200114205523.1054271-3-alexander.deucher@amd.com
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1015
See-also: d28ca864c4 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
See-also: 9b44b0b09d ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: squash into one patch, simplify slightly, commit log]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Jose Abreu says:
====================
net: stmmac: Fix selftests in Synopsys AXS101 board
Set of fixes for sefltests so that they work in Synopsys AXS101 board.
Final output:
$ ethtool -t eth0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters 0
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control -95
10. RSS -95
11. VLAN Filtering -95
12. VLAN Filtering (perf) -95
13. Double VLAN Filter -95
14. Double VLAN Filter (perf) -95
15. Flexible RX Parser -95
16. SA Insertion (desc) -95
17. SA Replacement (desc) -95
18. SA Insertion (reg) -95
19. SA Replacement (reg) -95
20. VLAN TX Insertion -95
21. SVLAN TX Insertion -95
22. L3 DA Filtering -95
23. L3 SA Filtering -95
24. L4 DA TCP Filtering -95
25. L4 SA TCP Filtering -95
26. L4 DA UDP Filtering -95
27. L4 SA UDP Filtering -95
28. ARP Offload -95
29. Jumbo Frame 0
30. Multichannel Jumbo -95
31. Split Header -95
Description:
1) Fixes the unaligned accesses that caused CPU halt in Synopsys AXS101
boards.
2) Fixes the VLAN tests when filtering failed to work.
3) Fixes the VLAN Perfect tests when filtering is not available in HW.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When HW does not support perfect filtering the feature will not be
enabled in the net_device. Add a check for this to prevent failures.
Fixes: 1b2250a04c ("net: stmmac: selftests: Add tests for VLAN Perfect Filtering")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the VLAN ID does not match the expected one it means filter failed
in HW. Fix it.
Fixes: 94e1838200 ("net: stmmac: selftests: Add selftest for VLAN TX Offload")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Synopsys AXS101 boards do not support unaligned memory loads or stores.
Change the selftests mechanism to explicity:
- Not add extra alignment in TX SKB
- Use the unaligned version of ether_addr_equal()
Fixes: 091810dbde ("net: stmmac: Introduce selftests support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements
however up to UCC_MAX_NUM (8) elements are potentially being written
to it. Currently we have an array out-of-bounds write error on the
last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in
size.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Why]
Noticed this while testing MST with the 4 ports MST hub from
StarTech.com. Sometimes can't light up monitors normally and get the
error message as 'sideband msg build failed'.
Look into aux transactions, found out that source sometimes will send
out another down request before receiving the down reply of the
previous down request. On the other hand, in drm_dp_get_one_sb_msg(),
current code doesn't handle the interleaved replies case. Hence, source
can't build up message completely and can't light up monitors.
[How]
For good compatibility, enforce source to send out one down request at a
time. Add a flag, is_waiting_for_dwn_reply, to determine if the source
can send out a down request immediately or not.
- Check the flag before calling process_single_down_tx_qlock to send out
a msg
- Set the flag when successfully send out a down request
- Clear the flag when successfully build up a down reply
- Clear the flag when find erros during sending out a down request
- Clear the flag when find errors during building up a down reply
- Clear the flag when timeout occurs during waiting for a down reply
- Use drm_dp_mst_kick_tx() to try to send another down request in queue
at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages
in queue when errors occur)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
- Fix DAT candidate selection on little endian systems,
by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl4dzQUWHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoQFuD/44PUv3jHW9S8aIu5FobWHlswOg
e1p9g98QdO7dezkkQa64tuFMR6mgVefOeK2+LHCZQ3Svd6xeGaxEGNo6vdzrkyrj
iRl/5nY8hRZ3jIdD7kOG11yX/ra+3BSWMWS4yu0OAawYFMYxakW6qUR7OUaqL9xv
Qr/XHu7S/tpy4MGUDabu11KlJGyZBfyXQxEKmSjjfWVITqVKNeoZONFqm2lmLOHs
RppvTjzdTf3HUPp6C9rC1b6phN7G8XLRXqXrgY4LzTDmwHbOmPvJQ1t+kh9dfZuX
DYsv89dl4iVIcSUY9fyUA9YxSHRyqiXRDDG0DPIy0AqRrHy0HgdGTlwCkS1idl1H
okiuO5rUzpDFGG5F8BRKY2t29JN8BO+/YVZpa5bl9ZgQQpnuBu+kkbceYCHY0lat
h2y3AMsJUcWEbFsa/ulEmHw8aj38rE4lgd7lhLir04BFVZHVB+faH78MQ7xB7+Xl
lPl4ptf3l3mwWW/tXbuWa6bXjCg5UBAOr4fEyhrg8fM0rst8LG6trWZWlWgZykLe
3HSnaR00tH8DiMPf/Zl7tAX/dKCmzCo6h7mXUAfvw1PktOvWC1JhtjchJASOqnoP
peD45G5W3DGgxtmfcl6J33BmMllbxeT1N6sQRApliYvcrrMZ9gVzr2sHFxHftFXl
kyCpbAlfAZ6ceGYCuQ==
=6zKP
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20200114' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Fix DAT candidate selection on little endian systems,
by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (85) call bpf_get_socket_cookie#46
1: R0_w=invP(id=0) R10=fp0
1: (57) r0 &= 808464432
2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
2: (14) w0 -= 810299440
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
3: (c4) w0 s>>= 1
4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
4: (76) if w0 s>= 0x30303030 goto pc+216
221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
221: (95) exit
processed 6 insns (limit 1000000) [...]
Taking a closer look, the program was xlated as follows:
# ./bpftool p d x i 12
0: (85) call bpf_get_socket_cookie#7800896
1: (bf) r6 = r0
2: (57) r6 &= 808464432
3: (14) w6 -= 810299440
4: (c4) w6 s>>= 1
5: (76) if w6 s>= 0x30303030 goto pc+216
6: (05) goto pc-1
7: (05) goto pc-1
8: (05) goto pc-1
[...]
220: (05) goto pc-1
221: (05) goto pc-1
222: (95) exit
Meaning, the visible effect is very similar to f54c7898ed ("bpf: Fix
precision tracking for unbounded scalars"), that is, the fall-through
branch in the instruction 5 is considered to be never taken given the
conclusion from the min/max bounds tracking in w6, and therefore the
dead-code sanitation rewrites it as goto pc-1. However, real-life input
disagrees with verification analysis since a soft-lockup was observed.
The bug sits in the analysis of the ARSH. The definition is that we shift
the target register value right by K bits through shifting in copies of
its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the
register into 32 bit mode, same happens after simulating the operation.
However, for the case of simulating the actual ARSH, we don't take the
mode into account and act as if it's always 64 bit, but location of sign
bit is different:
dst_reg->smin_value >>= umin_val;
dst_reg->smax_value >>= umin_val;
dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val);
Consider an unknown R0 where bpf_get_socket_cookie() (or others) would
for example return 0xffff. With the above ARSH simulation, we'd see the
following results:
[...]
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (57) r0 &= 808464432
-> R0_runtime = 0x3030
3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
3: (14) w0 -= 810299440
-> R0_runtime = 0xcfb40000
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
(0xffffffff)
4: (c4) w0 s>>= 1
-> R0_runtime = 0xe7da0000
5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0x7ffbfff8)
[...]
In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011
0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that
is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly
retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into
0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000'
and means here that the simulation didn't retain the sign bit. With above
logic, the updates happen on the 64 bit min/max bounds and given we coerced
the register, the sign bits of the bounds are cleared as well, meaning, we
need to force the simulation into s32 space for 32 bit alu mode.
Verification after the fix below. We're first analyzing the fall-through branch
on 32 bit signed >= test eventually leading to rejection of the program in this
specific case:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r2 = 808464432
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (bf) r6 = r0
3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0
3: (57) r6 &= 808464432
4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
4: (14) w6 -= 810299440
5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
5: (c4) w6 s>>= 1
6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0xfffbfff8)
6: (76) if w6 s>= 0x30303030 goto pc+216
7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
7: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 8 insns (limit 1000000) [...]
Fixes: 9cbe1f5a32 ("bpf/verifier: improve register value range tracking with ARSH")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net
kmemleak detects the following memory leak when hot removing
a network device:
unreferenced object 0xffff888083f63600 (size 256):
comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s)
hex dump (first 32 bytes):
00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
backtrace:
[<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc]
[<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc]
[<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus]
[<00000000046e64f1>] really_probe+0x22f/0xb50
[<000000005cc35eb7>] driver_probe_device+0x25e/0x370
[<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0
[<000000005e3d09f0>] __device_attach+0x1c6/0x2f0
[<00000000a72c362f>] bus_probe_device+0x1a6/0x260
[<0000000008478399>] device_add+0x10a3/0x18e0
[<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus]
[<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus]
[<000000002c94bb64>] process_one_work+0x919/0x17d0
[<0000000096de6781>] worker_thread+0x87/0xb40
[<00000000fbe7397e>] kthread+0x333/0x3f0
[<000000004f844269>] ret_from_fork+0x3a/0x50
rndis_filter_device_add() allocates an instance of struct rndis_device
which never gets deallocated as rndis_filter_device_remove() sets
net_device->extension which points to the rndis_device struct to NULL,
leaving the rndis_device dangling.
Since net_device->extension is eventually freed in free_netvsc_device(),
we refrain from setting it to NULL inside rndis_filter_device_remove()
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the packet pointed to by retransmit_skb_hint is unlinked by ACK,
retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue().
If packet loss is detected at this time, retransmit_skb_hint will be set
to point to the current packet loss in tcp_verify_retransmit_hint(),
then the packets that were previously marked lost but not retransmitted
due to the restriction of cwnd will be skipped and cannot be
retransmitted.
To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can
be reset only after all marked lost packets are retransmitted
(retrans_out >= lost_out), otherwise we need to traverse from
tcp_rtx_queue_head in tcp_xmit_retransmit_queue().
Packetdrill to demonstrate:
// Disable RACK and set max_reordering to keep things simple
0 `sysctl -q net.ipv4.tcp_recovery=0`
+0 `sysctl -q net.ipv4.tcp_max_reordering=3`
// Establish a connection
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <...>
+.01 < . 1:1(0) ack 1 win 257
+0 accept(3, ..., ...) = 4
// Send 8 data segments
+0 write(4, ..., 8000) = 8000
+0 > P. 1:8001(8000) ack 1
// Enter recovery and 1:3001 is marked lost
+.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop>
+0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop>
+0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop>
// Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001
+0 > . 1:1001(1000) ack 1
// 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL
+.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop>
// Now retransmit_skb_hint points to 4001:5001 which is now marked lost
// BUG: 2001:3001 was not retransmitted
+0 > . 2001:3001(1000) ack 1
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
snd_seq_info_timer_read() reads the information of the timer assigned
for each queue, but it's done in a racy way which may lead to UAF as
spotted by syzkaller.
This patch applies the missing q->timer_mutex lock while accessing the
timer object as well as a slight code change to adapt the standard
coding style.
Reported-by: syzbot+2b2ef983f973e5c40943@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200115203733.26530-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:
"Note that the microcode update must be aligned on a 16-byte boundary
and the size of the microcode update must be 1-KByte granular"
When early-load Intel microcode is loaded from initramfs, userspace tool
'iucode_tool' has already 16-byte aligned those microcode bits in that
initramfs image. Image that was created something like this:
iucode_tool --write-earlyfw=FOO.cpio microcode-files...
However, when early-load Intel microcode is loaded from built-in
firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that
16-byte alignment is not guaranteed.
Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.
[ If we end up having other firmware with much bigger alignment
requirements, we might need to introduce some method for the firmware
to specify it, this is the minimal "just increase the alignment a bit
to account for this one special case" patch - Linus ]
Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When handling devm_gpiod_get_optional() errors, free the memory already
allocated. This fixes Smatch warnings:
drivers/i2c/busses/i2c-iop3xx.c:437 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter'
drivers/i2c/busses/i2c-iop3xx.c:442 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter'
Fixes: fdb7e884ad ("i2c: iop: Use GPIO descriptors")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Fix keyboard brightness control for ASUS laptops
* Better handling parameters of GPD pocket fan module to avoid thermal shock
* Add IDs to PMC platform driver to support Intel Comet Lake
* Fix potential dead lock in Mellanox TM FIFO driver and ABI documentation
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Fix keyboard brightness cannot be set to 0
Documentation/ABI:
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel-ips:
- Use the correct style for SPDX License Identifier
intel_pmc_core:
- update Comet Lake platform driver
platform/mellanox:
- fix potential deadlock in the tmfifo driver
-----BEGIN PGP SIGNATURE-----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=zKPB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Fix keyboard brightness control for ASUS laptops
- Better handling parameters of GPD pocket fan module to avoid
thermal shock
- Add IDs to PMC platform driver to support Intel Comet Lake
- Fix potential dead lock in Mellanox TM FIFO driver and ABI
documentation
* tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86:
Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
platform/x86: intel_pmc_core: update Comet Lake platform driver
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
platform/mellanox: fix potential deadlock in the tmfifo driver
platform/x86: intel-ips: Use the correct style for SPDX License Identifier
Pull crypto fix from Herbert Xu:
"This fixes a build problem for the hisilicon driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/sec2 - Use atomics instead of __sync
Pull vfs fixes from Al Viro:
"Fixes for mountpoint_last() bugs (by converting to use of
lookup_last()) and an autofs regression fix from this cycle (caused by
follow_managed() breakage introduced in barrier fixes series)"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix autofs regression caused by follow_managed() changes
reimplement path_mountpoint() with less magic
One of the recent Tegra I2C commits made a change that resumes runtime PM
during driver's probe, but it missed to put the RPM in a case of error.
Note that it's not correct to use pm_runtime_status_suspended because it
breaks RPM refcounting.
Fixes: 8ebf15e9c8 ("i2c: tegra: Move suspend handling to NOIRQ phase")
Cc: <stable@vger.kernel.org> # v5.4+
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I noticed that sometime I2C clock is kept enabled during suspend-resume.
This happens because runtime PM defers dynamic suspension and thus it may
happen that runtime PM is in active state when system enters into suspend.
In particular I2C controller that is used for CPU's DVFS is often kept ON
during suspend because CPU's voltage scaling happens quite often.
Fixes: 8ebf15e9c8 ("i2c: tegra: Move suspend handling to NOIRQ phase")
Cc: <stable@vger.kernel.org> # v5.4+
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rather than open-code the extraction of the E0PD field from the MMFR2
register, we can use the cpuid_feature_extract_unsigned_field() helper
instead.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that the decision to use non-global mappings is stored in a variable,
the check to avoid enabling them for the terminally broken ThunderX1
platform can be simplified so that it is only keyed off the MIDR value.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Use the new 'as-instr' Kconfig macro to define CONFIG_BROKEN_GAS_INST
directly, making it available everywhere.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
[will: Drop redundant 'y if' logic]
Signed-off-by: Will Deacon <will@kernel.org>
null_zone_write() only allows writing empty and implicitly opened zones.
Writing to closed and explicitly opened zones must also be allowed and
the zone condition must be transitioned to implicit open if the zone
is not explicitly opened already.
Fixes: da644b2cc1 ("null_blk: add zone open, close, and finish support")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor the code which checks to see if we need to use non-global
mappings to use a variable instead of checking with the CPU capabilities
each time, doing the initial check for KPTI early in boot before we
start allocating memory so we still avoid transitioning to non-global
mappings in common cases.
Since this variable always matches our decision about non-global
mappings this means we can also combine arm64_kernel_use_ng_mappings()
and arm64_unmap_kernel_at_el0() into a single function, the variable
simply stores the result and the decision code is elsewhere. We could
just have the users check the variable directly but having a function
makes it clear that these uses are read-only.
The result is that we simplify the code a bit and reduces the amount of
code executed at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
