Commit Graph

2549 Commits

Author SHA1 Message Date
Chuck Lever
30b7e246a6 svcrdma: Keep rpcrdma_msg fields in network byte-order
Fields in struct rpcrdma_msg are __be32. Don't byte-swap these
fields when decoding RPC calls and then swap them back for the
reply. For the most part, they can be left alone.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-04 16:55:59 -04:00
Chuck Lever
70747c25a7 svcrdma: Fix byte-swapping in svc_rdma_sendto.c
In send_write_chunks(), we have:

	for (xdr_off = rqstp->rq_res.head[0].iov_len, chunk_no = 0;
	     xfer_len && chunk_no < arg_ary->wc_nchunks;
	     chunk_no++) {
		 . . .
	}

Note that arg_ary->wc_nchunk is in network byte-order. For the
comparison to work correctly, both have to be in native byte-order.

In send_reply_chunks, we have:

	write_len = min(xfer_len, htonl(ch->rs_length));

xfer_len is in native byte-order, and ch->rs_length is in
network byte-order. be32_to_cpu() is the correct byte swap
for ch->rs_length.

As an additional clean up, replace ntohl() with be32_to_cpu() in
a few other places.

This appears to address a problem with large rsize hangs while
using PHYSICAL memory registration. I suspect that is the only
registration mode that uses more than one chunk element.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-04 16:55:58 -04:00
Chuck Lever
da7049f834 svcrdma: Remove svc_rdma_xdr_decode_deferred_req()
svc_rdma_xdr_decode_deferred_req() indexes an array with an
un-byte-swapped value off the wire. Fortunately this function
isn't used anywhere, so simply remove it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-03 15:15:23 -04:00
Chuck Lever
3f87d5d6ac SUNRPC: Move EXPORT_SYMBOL for svc_process
Clean up.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-03 15:15:22 -04:00
Chuck Lever
632dda833e SUNRPC: Clean up bc_send()
Clean up: Merge bc_send() into bc_svc_process().

Note: even thought this touches svc.c, it is a client-side change.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 13:30:35 -04:00
Trond Myklebust
1193d58f75 SUNRPC: Backchannel handle socket nospace
If the socket was busy due to a socket nospace error, then we should
retry the send.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 13:30:35 -04:00
Trond Myklebust
88de6af24f SUNRPC: Fix a memory leak in the backchannel code
req->rq_private_buf isn't initialised when xprt_setup_backchannel calls
xprt_free_allocation.

Fixes: fb7a0b9add ("nfs41: New backchannel helper routines")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 08:55:28 -04:00
Stefan Hajnoczi
9300fdba25 SUNRPC: drop stale doc comments in xprtsock.c
Several functions have outdated arguments listed in the doc comments.
Drop documentation for arguments that no longer exist.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 08:55:28 -04:00
Luis R. Rodriguez
9c27847dda kernel/params: constify struct kernel_param_ops uses
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.

In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.

Test compiled on x86_64 against:

	* allnoconfig
	* allmodconfig
	* allyesconfig

@ const_found @
identifier ops;
@@

const struct kernel_param_ops ops = {
};

@ const_not_found depends on !const_found @
identifier ops;
@@

-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};

Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:10 +09:30
Doug Ledford
175e8efe69 Merge branches 'bart-srp', 'generic-errors', 'ira-cleanups' and 'mwang-v8' into k.o/for-4.2 2015-05-20 16:12:40 -04:00
Ira Weiny
5d9fb04406 IB/core: Change rdma_protocol_iboe to roce
After discussion upstream, it was agreed to transition the usage of iboe
in the kernel to roce.  This keeps our terminology consistent with what
was finalized in the IBTA Annex 16 and IBTA Annex 17 publications.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20 15:58:19 -04:00
Sagi Grimberg
76357c715f xprtrdma, svcrdma: Switch to generic logging helpers
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18 13:44:23 -04:00
Michael Wang
bc0f1d7153 IB/Verbs: Use management helper rdma_cap_read_multi_sge()
Introduce helper rdma_cap_read_multi_sge() to help us check if the port of an
IB device support RDMA Read Multiple Scatter-Gather Entries.

Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18 13:35:05 -04:00
Michael Wang
3de2c31ce7 IB/Verbs: Reform IB-ulp xprtrdma
Use raw management helpers to reform IB-ulp xprtrdma.

Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18 13:35:04 -04:00
Scott Mayhew
9507271d96 svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
In an environment where the KDC is running Active Directory, the
exported composite name field returned in the context could be large
enough to span a page boundary.  Attaching a scratch buffer to the
decoding xdr_stream helps deal with those cases.

The case where we saw this was actually due to behavior that's been
fixed in newer gss-proxy versions, but we're fixing it here too.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-05-04 12:02:40 -04:00
Linus Torvalds
59953fba87 NFS client updates for Linux 4.1
Highlights include:
 
 Stable patches:
 - Fix a regression in /proc/self/mountstats
 - Fix the pNFS flexfiles O_DIRECT support
 - Fix high load average due to callback thread sleeping
 
 Bugfixes:
 - Various patches to fix the pNFS layoutcommit support
 - Do not cache pNFS deviceids unless server notifications are enabled
 - Fix a SUNRPC transport reconnection regression
 - make debugfs file creation failure non-fatal in SUNRPC
 - Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints
 - Fix locking around NFSv4.2 fallocate() support
 - Truncating NFSv4 file opens should also sync O_DIRECT writes
 - Prevent infinite loop in rpcrdma_ep_create()
 
 Features:
 - Various improvements to the RDMA transport code's handling of memory
   registration
 - Various code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVOmT6AAoJEGcL54qWCgDyrhYQAMPKXB55jrdOR/7UVSF/xPML
 7OjMGHvBnTn/y0pNIyLyS1PjTZZsD/WZjoW9EFGpTv727qQNVoFxFRLNUcgi3NoL
 1YledCkLf7Q32aqod93SRRFPc9hzBoKhOZpOzBuWaAviyAB3KLi70DWAq9qRReYM
 prXUQQjpW5FLU+B2ifaVc2RCnu/rZ2c02YdR2XdtkBaAJxuhB2vR8IY1evwjCv3R
 5zyLDd9zSDDoArdpUzM97cxZPcYRSqbOwgTKvaaRnDDq/mKbKMZaqmEfjblwzNFt
 b43FbveJzZ3hlPADIpmaiMHjRTbxWjIKc9K1sOF2FPfcuPe2yM3DMAxDegUkEveS
 7fkbv/qRZ30NqfchGanX/pmBlLOcdI76qe/bwhN19wCnw48O1eeHi1HK8rWGhU+E
 qcrRZ3ZS2ufP/MVBuhauy0qU9Q4wcEtm7NGGP1231ZtmfjHKyBa4pLirNfG1AlJt
 dK7tBrknVx+WVm/UddJp/fEsxbP0+fki6TwzioHUSWcz8rDVYF6PFT/QPM54SX2h
 0oqwvu6d/uShpkVRm+fbje8FHmUxKdgqDsCYX2fNjWskh1oXSPsItvjqmTmTlE0i
 EBmBwVwI0uB1ZQ3PrJLadhRcO3ZJmLQ5gNj456dstvWy6UQds1xyIQ/DgvmlzxWO
 E9t0l18xHGRwbndsDa8f
 =j5dP
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Another set of mainly bugfixes and a couple of cleanups.  No new
  functionality in this round.

  Highlights include:

  Stable patches:
   - Fix a regression in /proc/self/mountstats
   - Fix the pNFS flexfiles O_DIRECT support
   - Fix high load average due to callback thread sleeping

  Bugfixes:
   - Various patches to fix the pNFS layoutcommit support
   - Do not cache pNFS deviceids unless server notifications are enabled
   - Fix a SUNRPC transport reconnection regression
   - make debugfs file creation failure non-fatal in SUNRPC
   - Another fix for circular directory warnings on NFSv4 "junctioned"
     mountpoints
   - Fix locking around NFSv4.2 fallocate() support
   - Truncating NFSv4 file opens should also sync O_DIRECT writes
   - Prevent infinite loop in rpcrdma_ep_create()

  Features:
   - Various improvements to the RDMA transport code's handling of
     memory registration
   - Various code cleanups"

* tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits)
  fs/nfs: fix new compiler warning about boolean in switch
  nfs: Remove unneeded casts in nfs
  NFS: Don't attempt to decode missing directory entries
  Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one"
  NFS: Rename idmap.c to nfs4idmap.c
  NFS: Move nfs_idmap.h into fs/nfs/
  NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h
  NFS: Add a stub for GETDEVICELIST
  nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes
  nfs: fix DIO good bytes calculation
  nfs: Fetch MOUNTED_ON_FILEID when updating an inode
  sunrpc: make debugfs file creation failure non-fatal
  nfs: fix high load average due to callback thread sleeping
  NFS: Reduce time spent holding the i_mutex during fallocate()
  NFS: Don't zap caches on fallocate()
  xprtrdma: Make rpcrdma_{un}map_one() into inline functions
  xprtrdma: Handle non-SEND completions via a callout
  xprtrdma: Add "open" memreg op
  xprtrdma: Add "destroy MRs" memreg op
  xprtrdma: Add "reset MRs" memreg op
  ...
2015-04-26 17:33:59 -07:00
Linus Torvalds
9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Trond Myklebust
f139b6c676 NFS: NFSoRDMA Client Changes
This patch series creates an operation vector for each of the different
 memory registration modes.  This should make it easier to one day increase
 credit limit, rsize, and wsize.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVIoD8AAoJENfLVL+wpUDrGzMP/3976ixlHREOUxITQaWLUCpE
 g55hhfkv1ebu3CiaRaV1Zz9lfZMREyzsFPcM6ZmzJ6M4s1zJLfmA6QtbnHOkKcrP
 pfYRVaJtJ4Qw0CXPKHCmJXYKqoPlxIfeNxGP71MNKo3bx18g4kh0eoGvp1kjC7Fd
 p0t6/n/GPG4Wx0ll93cH/0/MXvCmngRnpJFM8+j8o1NpBwcgJu1MKtj+UQHWzpII
 QATefZzqz2xW4Er9dKt0qoKm1R22sz5GE7AHMdDtBvtnKaliE/pm3W1RMtgO3Fbc
 fa+ISfHyeQnlAmye4iEpZc6MAugQm6/av39Qn8OOUDOYd8cpM3FTHVYPcgOoM1cL
 SNOPp/YfiZDAgRzV3KmfVeXT0EqJoKmZsmQwaRNO+N0KXuVzIcaURWXoih8ANQ/m
 9Rh97lRo1xFgLbDFIJCp/kCT43hN8UDQdDEVLvAXMfEff7rnDAQg8Gw3PeNJpvHJ
 VazGJKeTzHYw1qut7TzQXYQicYyuIW9QyEpbsO1rx6iFdK6wdZxG6ingLCit9oIc
 zh3/L+/plJBYTWEZtzffskfjFIXDvbgTzMIt8gB9W7Bdpbd28S8tmu/TAJfsuUId
 Z4mojHpaksD1dO9dnF3viibYgEAs5E+dFrDoMhceBTbnu7zt5BgU7zbOZPTR6qvt
 yC4FYxzfhgYpmEooYFoP
 =Fkzr
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-4.1-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: NFSoRDMA Client Changes

This patch series creates an operation vector for each of the different
memory registration modes.  This should make it easier to one day increase
credit limit, rsize, and wsize.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-04-23 15:16:37 -04:00
Trond Myklebust
21330b6670 Merge branch 'bugfixes'
* bugfixes:
  NFSv4: Return delegations synchronously in evict_inode
  SUNRPC: Fix a regression when reconnecting
  NFS: remount with security change should return EINVAL
  nfs: do not export discarded symbols
  NFSv4.1: don't export static symbol
2015-04-23 15:16:27 -04:00
Jeff Layton
3f94009816 sunrpc: make debugfs file creation failure non-fatal
v2: gracefully handle the case where some dentry pointers end up NULL
    and be more dilligent about zeroing out dentry pointers

We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.

This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.

While discussing that patch however, Greg K.H. stated:

    "No kernel code should care / fail if a debugfs function fails, so
     please fix up the sunrpc code first."

This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.

This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23 14:42:27 -04:00
Rasmus Villemoes
41416f2330 lib/string_helpers.c: change semantics of string_escape_mem
The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf().  If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).

So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired.  Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.

This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst.  For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.

In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small.  We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.

In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.

In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.

[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:24 -07:00
Iulia Manda
2813893f8b kernel: conditionally support non-root users, groups and capabilities
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root.  For these systems,
supporting multiple users is not necessary.

This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional.  It is enabled
under CONFIG_EXPERT menu.

When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.

The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.

Also, groups.c is compiled out completely.

In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.

This change saves about 25 KB on a defconfig build.  The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB.  (The 25k goes down a bit with allnoconfig, but not that much.

The kernel was booted in Qemu.  All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.

Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:22 -07:00
David Howells
c5ef603528 VFS: net/: d_inode() annotations
socket inodes and sunrpc filesystems - inodes owned by that code

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:56 -04:00
Linus Torvalds
6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Linus Torvalds
d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Al Viro
d8725c86ae get rid of the size argument of sock_sendmsg()
it's equal to iov_iter_count(&msg->msg_iter) in all cases

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 15:27:37 -04:00
Jeff Layton
f9c72d10d6 sunrpc: make debugfs file creation failure non-fatal
We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.

This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.

While discussing that patch however, Greg K.H. stated:

    "No kernel code should care / fail if a debugfs function fails, so
     please fix up the sunrpc code first."

This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.

This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.

Symptoms were failing krb5 mounts on systems using gss-proxy and
selinux.

Fixes: 388f0c7767 "sunrpc: add a debugfs rpc_xprt directory..."
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 14:15:08 -04:00
Chuck Lever
d654788e98 xprtrdma: Make rpcrdma_{un}map_one() into inline functions
These functions are called in a loop for each page transferred via
RDMA READ or WRITE. Extract loop invariants and inline them to
reduce CPU overhead.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:53 -04:00
Chuck Lever
e46ac34c3c xprtrdma: Handle non-SEND completions via a callout
Allow each memory registration mode to plug in a callout that handles
the completion of a memory registration operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:53 -04:00
Chuck Lever
3968cb5850 xprtrdma: Add "open" memreg op
The open op determines the size of various transport data structures
based on device capabilities and memory registration mode.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:53 -04:00
Chuck Lever
4561f347d4 xprtrdma: Add "destroy MRs" memreg op
Memory Region objects associated with a transport instance are
destroyed before the instance is shutdown and destroyed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:53 -04:00
Chuck Lever
31a701a947 xprtrdma: Add "reset MRs" memreg op
This method is invoked when a transport instance is about to be
reconnected. Each Memory Region object is reset to its initial
state.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:53 -04:00
Chuck Lever
91e70e70e4 xprtrdma: Add "init MRs" memreg op
This method is used when setting up a new transport instance to
create a pool of Memory Region objects that will be used to register
memory during operation.

Memory Regions are not needed for "physical" registration, since
->prepare and ->release are no-ops for that mode.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
6814baead8 xprtrdma: Add a "deregister_external" op for each memreg mode
There is very little common processing among the different external
memory deregistration functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
9c1b4d775f xprtrdma: Add a "register_external" op for each memreg mode
There is very little common processing among the different external
memory registration functions. Have rpcrdma_create_chunks() call
the registration method directly. This removes a stack frame and a
switch statement from the external registration path.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
1c9351ee0e xprtrdma: Add a "max_payload" op for each memreg mode
The max_payload computation is generalized to ensure that the
payload maximum is the lesser of RPC_MAX_DATA_SEGS and the number of
data segments that can be transmitted in an inline buffer.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
a0ce85f595 xprtrdma: Add vector of ops for each memory registration strategy
Instead of employing switch() statements, let's use the typical
Linux kernel idiom for handling behavioral variation: virtual
functions.

Start by defining a vector of operations for each supported memory
registration mode, and by adding a source file for each mode.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
41f9702896 xprtrdma: Prevent infinite loop in rpcrdma_ep_create()
If a provider advertizes a zero max_fast_reg_page_list_len, FRWR
depth detection loops forever. Instead of just failing the mount,
try other memory registration modes.

Fixes: 0fc6c4e7bb ("xprtrdma: mind the device's max fast . . .")
Reported-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
805272406a xprtrdma: Byte-align FRWR registration
The RPC/RDMA transport's FRWR registration logic registers whole
pages. This means areas in the first and last pages that are not
involved in the RDMA I/O are needlessly exposed to the server.

Buffered I/O is typically page-aligned, so not a problem there. But
for direct I/O, which can be byte-aligned, and for reply chunks,
which are nearly always smaller than a page, the transport could
expose memory outside the I/O buffer.

FRWR allows byte-aligned memory registration, so let's use it as
it was intended.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
e23779451e xprtrdma: Perform a full marshal on retransmit
Commit 6ab59945f2 ("xprtrdma: Update rkeys after transport
reconnect" added logic in the ->send_request path to update the
chunk list when an RPC/RDMA request is retransmitted.

Note that rpc_xdr_encode() resets and re-encodes the entire RPC
send buffer for each retransmit of an RPC. The RPC send buffer
is not preserved from the previous transmission of an RPC.

Revert 6ab59945f2, and instead, just force each request to be
fully marshaled every time through ->send_request. This should
preserve the fix from 6ab59945f2, while also performing pullup
during retransmits.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Chuck Lever
0dd39cae26 xprtrdma: Display IPv6 addresses and port numbers correctly
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31 09:52:52 -04:00
Trond Myklebust
0695314ef0 SUNRPC: Fix a regression when reconnecting
If the task needs to give up the socket lock in order to allow a
reconnect to occur, then it must also clear the 'rq_bytes_sent' field
so that when it retransmits, it knows to start from the beginning.

Fixes: 718ba5b873 ("SUNRPC: Add helpers to prevent socket create from racing")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-27 12:24:36 -04:00
Nicholas Mc Guire
55cc1d7806 SUNRPC: fix build-warning due to format missmatch
fix build-warning introduced by commit: f0eede10fd ("SUNRPC: use
jiffies_to_msecs for converting jiffies") which did not fixup
the format properly (my bad).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-13 09:05:20 -04:00
Nicholas Mc Guire
f0eede10fd SUNRPC: use jiffies_to_msecs for converting jiffies
Use jiffies_to_msecs for converting jiffies as it handles all of the corner
cases reliably and also helps readability.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-12 11:53:55 -04:00
Al Viro
1711fd9add sunrpc: fix braino in ->poll()
POLL_OUT isn't what callers of ->poll() are expecting to see; it's
actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap
bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-08 12:53:46 -07:00
Masanari Iida
d939be3add treewide: Fix typo in printk messages
This patch fix spelling typo in printk messages.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06 23:05:39 +01:00
Linus Torvalds
1b1bd56191 NFS client bugfixes for Linux 4.0
Highlights include:
 
 - Fix a regression in the NFSv4 open state recovery code
 - Fix a regression in the NFSv4 close code
 - Fix regressions and side-effects of the loop-back mounted NFS fixes
   in 3.18, that cause the NFS read() syscall to return EBUSY.
 - Fix regressions around the readdirplus code and how it interacts with
   the VFS lazy unmount changes that went into v3.18.
 - Fix issues with out-of-order RPC call replies replacing updated
   attributes with stale ones (particularly after a truncate()).
 - Fix an underflow checking issue with RPC/RDMA credits
 - Fix a number of issues with the NFSv4 delegation return/free code.
 - Fix issues around stale NFSv4.1 leases when doing a mount
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU+SJ6AAoJEGcL54qWCgDyVgQQAKNsF/O2O9ip2uAHZRZvM6TS
 Ev8c3Spj/FmRI1tlCcGi1zZ8uCSwvPQz3uAN0vOTMocUWjokT5sAgN5yBIxHasem
 6YK7jxs9WHiP7MGyReaAFJwG/W6LZndnlNqPWPs9KiaWwKVXIsQ3uFm/Y0lr90Fi
 ew16DQm0DUd4Yvv42WJR9ay7UwUPvT7wmaGIVVK2hjQqr2lx02jspt5kfrC+vsMU
 OYU/0YDofb2ajs5krbah6tUHf3VDnSVrXP6if66IrukCM9S4AvowpnMJQ5QJALh+
 cPlqHDm2ZzuIecpqZEgYLM73wQ2q+KBXTlDLcgYg6LjnqBEivwO9RDn6tfCwKTcS
 tCFohQc9iDOj9rTZ9EQlQME6u/FdxWncpxyTsMyBk7FlcLsOQRqio/FXZhbyJGuH
 gvIdIW3fPseijtejpYkxgabe6JL9NRvjv3SnOay7xHs9Vn4tRkFF2mkkQDZOG6HT
 atkxQp8kB3m9gMoeAmTLdTcJkcFdk6AKnNrcyJaa1GW4msmMuGZtq/6vayKJsBZb
 OIw788bDSOVpcVR+6SAC24/dutcl+WJHlSJShqvIrTKejBxPCc7IVSeg63FJsWTO
 sxfXdUr3wVJ1ooDFCspeBj+3zAimIq7qDmRRs85ekgEtxrgdUldhg/VwbDjvLjmb
 whXFpiCS7Ii0fVYtZvjz
 =qMB7
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

   - Fix a regression in the NFSv4 open state recovery code
   - Fix a regression in the NFSv4 close code
   - Fix regressions and side-effects of the loop-back mounted NFS fixes
     in 3.18, that cause the NFS read() syscall to return EBUSY.
   - Fix regressions around the readdirplus code and how it interacts
     with the VFS lazy unmount changes that went into v3.18.
   - Fix issues with out-of-order RPC call replies replacing updated
     attributes with stale ones (particularly after a truncate()).
   - Fix an underflow checking issue with RPC/RDMA credits
   - Fix a number of issues with the NFSv4 delegation return/free code.
   - Fix issues around stale NFSv4.1 leases when doing a mount"

* tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
  NFSv4.1: Clear the old state by our client id before establishing a new lease
  NFSv4: Fix a race in NFSv4.1 server trunking discovery
  NFS: Don't write enable new pages while an invalidation is proceeding
  NFS: Fix a regression in the read() syscall
  NFSv4: Ensure we skip delegations that are already being returned
  NFSv4: Pin the superblock while we're returning the delegation
  NFSv4: Ensure we honour NFS_DELEGATION_RETURNING in nfs_inode_set_delegation()
  NFSv4: Ensure that we don't reap a delegation that is being returned
  NFS: Fix stateid used for NFS v4 closes
  NFSv4: Don't call put_rpccred() under the rcu_read_lock()
  NFS: Don't require a filehandle to refresh the inode in nfs_prime_dcache()
  NFSv3: Use the readdir fileid as the mounted-on-fileid
  NFS: Don't invalidate a submounted dentry in nfs_prime_dcache()
  NFSv4: Set a barrier in the update_changeattr() helper
  NFS: Fix nfs_post_op_update_inode() to set an attribute barrier
  NFS: Remove size hack in nfs_inode_attrs_need_update()
  NFSv4: Add attribute update barriers to delegreturn and pNFS layoutcommit
  NFS: Add attribute update barriers to NFS writebacks
  NFS: Set an attribute barrier on all updates
  NFS: Add attribute update barriers to nfs_setattr_update_inode()
  ...
2015-03-06 10:09:57 -08:00
Linus Torvalds
a6c5170d1e Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
 "Three miscellaneous bugfixes, most importantly the clp->cl_revoked
  bug, which we've seen several reports of people hitting"

* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
  sunrpc: integer underflow in rsc_parse()
  nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
  svcrpc: fix memory leak in gssp_accept_sec_context_upcall
2015-03-03 15:52:50 -08:00
Dan Carpenter
76cb4be993 sunrpc: integer underflow in rsc_parse()
If we call groups_alloc() with invalid values then it's might lead to
memory corruption.  For example, with a negative value then we might not
allocate enough for sizeof(struct group_info).

(We're doing this in the caller for consistency with other callers of
groups_alloc().  The other alternative might be to move the check out of
all the callers into groups_alloc().)

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-26 15:40:16 -05:00
Trond Myklebust
7a27eae362 NFS: RDMA Client Sparse Fix #2
This patch fixes another sparse fix found by Dan Carpenter's tool.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJU66HvAAoJENfLVL+wpUDrJdYP/Ap2xiMpEmO6Zl4h/MiDJKYs
 GIL3o+Ayc+wzlga2qBuNMfFBqzochCL2xqgS/9bvA0z/OT3ilq+FKZRr8FuDsmb+
 5XtIS49Kvo2mjWNpnh8GMoCbBoQfkBMJLETtR0KhhrMBNX5sidBPi2cSeZJxqnAw
 9LIc3Od9jyZSLh2je3gJCKxh90CVWgjs9OfJookfksNyVMnwK+TRWjo1FInEfkW6
 2fMFrC20xBg0qWWgtZL73ib8ojaIwv5MxnyFNgsiv/xcDWShZhdaMizBlqjDiNUq
 co9S1skJ9RTgInoDLeWvKoKkc7JjkLTpSzqsZx+Kke75p/D41Sah215jp0yyz2tb
 fEi+lZ8q1f5iorjamw5UDQPAuNcPx/eBzQNmkFGbue2xDP/kOXErb5AtnfMpDqav
 FXX/C3Vf6BxeAVB+8VifcdKEchE6cN9St6SBUludIisdmQWLLjSxazTAG7MXZdYW
 X0dxJ7D2hcwGEbjYKdNOn6a8+N3m1++XiJdPc1KSN71EO6z0xqjQM+3PytXCXaGI
 t3dKCDoEM/Ee1+4VxVa02OjW62ApNDd8APrCrn+8zMglG0eFwPmocNx/U42WanXd
 bGnEI9qd6mvn22eJrrOc55gShaDjovhXRmvvc2E8tHKVnaMXdfG8o5CjtB6LPXbW
 6deK+m1/LxkzFhRvMySs
 =ooZn
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: RDMA Client Sparse Fix #2

This patch fixes another sparse fix found by Dan Carpenter's tool.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
  xprtrdma: Store RDMA credits in unsigned variables
2015-02-23 19:16:43 -05:00
Chuck Lever
9b1dcbc8cf xprtrdma: Store RDMA credits in unsigned variables
Dan Carpenter's static checker pointed out:

   net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler()
   warn: can 'credits' be negative?

"credits" is defined as an int. The credits value comes from the
server as a 32-bit unsigned integer.

A malicious or broken server can plant a large unsigned integer in
that field which would result in an underflow in the following
logic, potentially triggering a deadlock of the mount point by
blocking the client from issuing more RPC requests.

net/sunrpc/xprtrdma/rpc_rdma.c:

  876          credits = be32_to_cpu(headerp->rm_credit);
  877          if (credits == 0)
  878                  credits = 1;    /* don't deadlock */
  879          else if (credits > r_xprt->rx_buf.rb_max_requests)
  880                  credits = r_xprt->rx_buf.rb_max_requests;
  881
  882          cwnd = xprt->cwnd;
  883          xprt->cwnd = credits << RPC_CWNDSHIFT;
  884          if (xprt->cwnd > cwnd)
  885                  xprt_release_rqst_cong(rqst->rq_task);

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: eba8ff660b ("xprtrdma: Move credit update to RPC . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-02-23 16:54:04 -05:00
Trond Myklebust
65d2918e71 Merge branch 'cleanups'
Merge cleanups requested by Linus.

* cleanups: (3 commits)
  pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit
  nfs: Can call nfs_clear_page_commit() instead
  nfs: Provide and use helper functions for marking a page as unstable
2015-02-18 07:28:37 -08:00
David Ramos
a1d1e9be5a svcrpc: fix memory leak in gssp_accept_sec_context_upcall
Our UC-KLEE tool found a kernel memory leak of 512 bytes (on x86_64) for
each call to gssp_accept_sec_context_upcall()
(net/sunrpc/auth_gss/gss_rpc_upcall.c). Since it appears that this call
can be triggered by remote connections (at least, from a cursory a
glance at the call chain), it may be exploitable to cause kernel memory
exhaustion. We found the bug in kernel 3.16.3, but it appears to date
back to commit 9dfd87da1a (2013-08-20).

The gssp_accept_sec_context_upcall() function performs a pair of calls
to gssp_alloc_receive_pages() and gssp_free_receive_pages().  The first
allocates memory for arg->pages.  The second then frees the pages
pointed to by the arg->pages array, but not the array itself.

Reported-by: David A. Ramos <daramos@stanford.edu>
Fixes: 9dfd87da1a ("rpc: fix huge kmalloc's in gss-proxy”)
Signed-off-by: David A. Ramos <daramos@stanford.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-17 18:09:02 -05:00
Chuck Lever
813b00d63f SUNRPC: Always manipulate rpc_rqst::rq_bc_pa_list under xprt->bc_pa_lock
Other code that accesses rq_bc_pa_list holds xprt->bc_pa_lock.
xprt_complete_bc_request() should do the same.

Fixes: 2ea24497a1 ("SUNRPC: RPC callbacks may be split . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-13 17:41:10 -05:00
Linus Torvalds
61845143fe Merge branch 'for-3.20' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "The main change is the pNFS block server support from Christoph, which
  allows an NFS client connected to shared disk to do block IO to the
  shared disk in place of NFS reads and writes.  This also requires xfs
  patches, which should arrive soon through the xfs tree, barring
  unexpected problems.  Support for other filesystems is also possible
  if there's interest.

  Thanks also to Chuck Lever for continuing work to get NFS/RDMA into
  shape"

* 'for-3.20' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd: default NFSv4.2 to on
  nfsd: pNFS block layout driver
  exportfs: add methods for block layout exports
  nfsd: add trace events
  nfsd: update documentation for pNFS support
  nfsd: implement pNFS layout recalls
  nfsd: implement pNFS operations
  nfsd: make find_any_file available outside nfs4state.c
  nfsd: make find/get/put file available outside nfs4state.c
  nfsd: make lookup/alloc/unhash_stid available outside nfs4state.c
  nfsd: add fh_fsid_match helper
  nfsd: move nfsd_fh_match to nfsfh.h
  fs: add FL_LAYOUT lease type
  fs: track fl_owner for leases
  nfs: add LAYOUT_TYPE_MAX enum value
  nfsd: factor out a helper to decode nfstime4 values
  sunrpc/lockd: fix references to the BKL
  nfsd: fix year-2038 nfs4 state problem
  svcrdma: Handle additional inline content
  svcrdma: Move read list XDR round-up logic
  ...
2015-02-12 10:39:41 -08:00
Trond Myklebust
c627d31ba0 SUNRPC: Cleanup to remove xs_tcp_close()
xs_tcp_close() is now just a call to xs_tcp_shutdown(), so remove it,
and replace the entry in xs_tcp_ops.

Suggested-by: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-10 11:06:04 -05:00
Trond Myklebust
402e23b4ed SUNRPC: Fix stupid typo in xs_sock_set_reuseport
Yes, kernel_setsockopt() hates you for using a char argument.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 17:31:02 -05:00
Trond Myklebust
54c0987492 SUNRPC: Define xs_tcp_fin_timeout only if CONFIG_SUNRPC_DEBUG
Now that the linger code is gone, the xs_tcp_fin_timeout variable has
no real function. Keep it for now, since it is part of the /proc
interface, but only define it if that /proc interface is enabled.

Suggested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 11:27:45 -05:00
Trond Myklebust
b70ae915e4 SUNRPC: Handle connection reset more efficiently.
If the connection reset is due to an active call on our side, then
the state change is sometimes not reported. Catch those instances
using xs_error_report() instead.
Also remove the xs_tcp_shutdown() call in xs_tcp_send_request() as
the change in behaviour makes it redundant.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 11:27:42 -05:00
Trond Myklebust
9e2b9f3776 SUNRPC: Remove the redundant XPRT_CONNECTION_CLOSE flag
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 11:26:06 -05:00
Trond Myklebust
caf4ccd4e8 SUNRPC: Make xs_tcp_close() do a socket shutdown rather than a sock_release
Use of socket shutdown() means that we monitor the shutdown process
through the xs_tcp_state_change() callback, so it is preferable to
a full close in all cases unless we're destroying the transport.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 11:20:44 -05:00
Trond Myklebust
0efeac261c SUNRPC: Ensure xs_tcp_shutdown() requests a full close of the connection
The previous behaviour left the connection half-open in order to try
to scrape the last replies from the socket. Now that we have more reliable
reconnection, change the behaviour to close down the socket faster.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 09:31:11 -05:00
Trond Myklebust
505936f59f SUNRPC: Cleanup to remove remaining uses of XPRT_CONNECTION_ABORT
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 09:20:40 -05:00
Trond Myklebust
9cbc94fb06 SUNRPC: Remove TCP socket linger code
Now that we no longer use the partial shutdown code when closing the
socket, we no longer need to worry about the TCP linger2 state.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-09 09:20:40 -05:00
Trond Myklebust
4efdd92c92 SUNRPC: Remove TCP client connection reset hack
Instead we rely on SO_REUSEPORT to provide the reconnection semantics
that we need for NFSv2/v3.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:30 -05:00
Trond Myklebust
de84d89030 SUNRPC: TCP/UDP always close the old socket before reconnecting
It is not safe to call xs_reset_transport() from inside xs_udp_setup_socket()
or xs_tcp_setup_socket(), since they do not own the correct locks. Instead,
do it in xs_connect().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:30 -05:00
Trond Myklebust
718ba5b873 SUNRPC: Add helpers to prevent socket create from racing
The socket lock is currently held by the task that is requesting the
connection be established. While that is efficient in the case where
the connection happens quickly, it is racy in the case where it doesn't.
What we really want is for the connect helper to be able to block access
to the socket while it is being set up.

This patch does so by arranging to transfer the socket lock from the
task that is requesting the connect attempt, and then releasing that
lock once everything is done.
This scheme also gives us automatic protection against collisions with
the RPC close code, so we can kill the cancel_delayed_work_sync()
call in xs_close().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:29 -05:00
Trond Myklebust
6cc7e90836 SUNRPC: Ensure xs_reset_transport() resets the close connection flags
Otherwise, we may end up looping.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:28 -05:00
Trond Myklebust
76698b2358 SUNRPC: Do not clear the source port in xs_reset_transport
Now that we can reuse bound ports after a close, we never really want to
clear the transport's source port after it has been set. Doing so really
messes up the NFSv3 DRC on the server.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:28 -05:00
Trond Myklebust
3913c78c3a SUNRPC: Handle EADDRINUSE on connect
Now that we're setting SO_REUSEPORT, we still need to handle the
case where a connect() is attempted, but the old socket is still
lingering.
Essentially, all we want to do here is handle the error by waiting
a few seconds and then retrying.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 21:47:27 -05:00
Trond Myklebust
4dda9c8a5e SUNRPC: Set SO_REUSEPORT socket option for TCP connections
When using TCP, we need the ability to reuse port numbers after
a disconnection, so that the NFSv3 server knows that we're the same
client. Currently we use a hack to work around the TCP socket's
TIME_WAIT: we send an RST instead of closing, which doesn't
always work...
The SO_REUSEPORT option added in Linux 3.9 allows us to bind multiple
TCP connections to the same source address+port combination, and thus
to use ordinary TCP close() instead of the current hack.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-08 18:52:11 -05:00
Trond Myklebust
bc3203cdca NFS: RDMA Client Sparse Fixes
This patch fixes a sparse warning in the initial submission.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJU09WdAAoJENfLVL+wpUDr2HMP/2rvjkncrlbumSUlkMMUPenZ
 PUM6dDAnvvhkRj/YrhmJ94v9SPb4BsR0ay4apn5aqmoEHqEy/LfAsoy1TlcspRO6
 DwIKD8wHQ9RkpIVaEt1IGhApWlWK3R5FqoDTSMW9VLq72QuCsnbX3EXWN9B+hgT7
 UVmcsGe0/5zd9v8RXzWJjyabOsx7rx7gNuuAyULO3RudNMzEpldMf7oHq0RwndOt
 akxSSvRSfMFyfJscfI3F2IJsbXBST+ZzzJ0oRXXWn0RfiWR+Z438Nk9HDuOfGBFv
 LACoELeJxtBEFAjBv6GnBILdSxRi6dTZPpAEzvNR45SJAk4c1gGDqgUbyIYXqeYM
 k8alEMCS+eKvDe7DL6N1Nlxq6oc5pAt7BYYpRzCz+2dd7gfHIOwurBnZwFgxN/rK
 GhtXCaBqqVr4lmu/lbgWjVFN/Jt6TGZ6+FqQhDM70CmJGBWbOEJNE6H50R7SiFpv
 7UapXg9iknCpjexkZS3cyAB0Qu31qvIK64ZzsPhVafmSYh9ed5hlT2WSwphfDki5
 ZQOktuPFtVkOI55Rz+2EpNNYe9nRuL5wBqD4Na3uUiEWgbnDLRmx+sDyzcfPujTN
 trFTwUO082SFK0yZVusZ04vlqjfzxSd4aYSeC5Zzgt0CYJCZd7z0tFrdLpyO/fDn
 PLfvcJyFRBBbaPgiwBHg
 =3fRY
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-3.20-part-2' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: RDMA Client Sparse Fixes

This patch fixes a sparse warning in the initial submission.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-for-3.20-part-2' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
  xprtrdma: Address sparse complaint in rpcr_to_rdmar()
2015-02-08 10:37:34 -05:00
Chuck Lever
b625a61698 xprtrdma: Address sparse complaint in rpcr_to_rdmar()
With "make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__":

linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30: warning: incorrect
  type in initializer (different base types)
linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30: expected restricted
  __be32 [usertype] *buffer
linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30:    got unsigned int
  [usertype] *rq_buffer

As far as I can tell this is a false positive.

Reported-by: kbuild-all@01.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-02-05 15:38:29 -05:00
Trond Myklebust
03a9a42a1a SUNRPC: NULL utsname dereference on NFS umount during namespace cleanup
Fix an Oopsable condition when nsm_mon_unmon is called as part of the
namespace cleanup, which now apparently happens after the utsname
has been freed.

Link: http://lkml.kernel.org/r/20150125220604.090121ae@neptune.home
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable@vger.kernel.org # 3.18
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03 16:40:17 -05:00
Trond Myklebust
e2c63e091e Merge branch 'flexfiles'
* flexfiles: (53 commits)
  pnfs: lookup new lseg at lseg boundary
  nfs41: .init_read and .init_write can be called with valid pg_lseg
  pnfs: Update documentation on the Layout Drivers
  pnfs/flexfiles: Add the FlexFile Layout Driver
  nfs: count DIO good bytes correctly with mirroring
  nfs41: wait for LAYOUTRETURN before retrying LAYOUTGET
  nfs: add a helper to set NFS_ODIRECT_RESCHED_WRITES to direct writes
  nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags
  nfs/flexfiles: send layoutreturn before freeing lseg
  nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE
  nfs41: allow async version layoutreturn
  nfs41: add range to layoutreturn args
  pnfs: allow LD to ask to resend read through pnfs
  nfs: add nfs_pgio_current_mirror helper
  nfs: only reset desc->pg_mirror_idx when mirroring is supported
  nfs41: add a debug warning if we destroy an unempty layout
  pnfs: fail comparison when bucket verifier not set
  nfs: mirroring support for direct io
  nfs: add mirroring support to pgio layer
  pnfs: pass ds_commit_idx through the commit path
  ...

Conflicts:
	fs/nfs/pnfs.c
	fs/nfs/pnfs.h
2015-02-03 16:01:27 -05:00
Weston Andros Adamson
840210fc48 sunrpc: add rpc_count_iostats_idx
Add a call to tally stats for a task under a different statsidx than
what's contained in the task structure.

This is needed to properly account for pnfs reads/writes when the
DS nfs version != the MDS version.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03 11:06:38 -08:00
Trond Myklebust
cc3ea893cb NFS: Client side changes for RDMA
These patches improve the scalability of the NFSoRDMA client and take large
 variables off of the stack.  Additionally, the GFP_* flags are updated to
 match what TCP uses.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUy/21AAoJENfLVL+wpUDrDR4QAJ+aZ1LqO5muJG5LDIReh0p+
 IyvAO3ekWKaaXZd5e/wOviHRRSBCs3oRBm1sNyjOOZYf7nl67RrndjGq2Ccp6tGw
 6V6ligIlhu3QAApFiQmLfpDXQeDBysMfhEQMXDj8kVhAvn3SWwbT6q1Bb8tMZvnu
 lwSPYCuLAdtPzDs3j3Pt3jSrOD7gS06Vtumco1yS82YiLK86E7JiOLb9w5Ltk0Wo
 DT9hZ7JXtflBy3trBsNYQ7GTjoYEp792Ca9DT/nie8/Tuuy3DhooLJKdwVErq/0/
 ycI033mw//RneY+/eF2wLeS4PlzaiSq7DmXKpE5MnkpVuNAdPbHbCuVzuXa4/LLD
 NhKyw/NTAE9ucFJ8e3apj3m42O00bMV0rx0rOUvMMdbNPBKzXk3rrb4uRYfT4k+D
 yss7aEZg0EcDbe9KqfuDdwXVJIZnvAvXD+V1iL4X3QmVM0JyJZouNZPoG7fCwA1g
 uoqGJK9zu7osr59YMomf2okWQFUQYCea5ombXYOo3ZtANw+OYaHDcMKTXaiCtMdA
 CZUEOND8mB/EFtgTMA2TZmDzch8iOOuD7wmtifb8h1DqN/3GxgecBcT5XMCx5zDR
 bMpt9vbCfe4YP6idpl5XEnVbcPG9CZF2W2Hg2gI7axX8R+ZMvwQQlWJjOqxoR6+F
 bpD/jjWFYaS6U7NGyylM
 =YCZe
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-3.20' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: Client side changes for RDMA

These patches improve the scalability of the NFSoRDMA client and take large
variables off of the stack.  Additionally, the GFP_* flags are updated to
match what TCP uses.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-for-3.20' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (21 commits)
  xprtrdma: Update the GFP flags used in xprt_rdma_allocate()
  xprtrdma: Clean up after adding regbuf management
  xprtrdma: Allocate zero pad separately from rpcrdma_buffer
  xprtrdma: Allocate RPC/RDMA receive buffer separately from struct rpcrdma_rep
  xprtrdma: Allocate RPC/RDMA send buffer separately from struct rpcrdma_req
  xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req
  xprtrdma: Add struct rpcrdma_regbuf and helpers
  xprtrdma: Refactor rpcrdma_buffer_create() and rpcrdma_buffer_destroy()
  xprtrdma: Simplify synopsis of rpcrdma_buffer_create()
  xprtrdma: Take struct ib_qp_attr and ib_qp_init_attr off the stack
  xprtrdma: Take struct ib_device_attr off the stack
  xprtrdma: Free the pd if ib_query_qp() fails
  xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprt
  xprtrdma: Move credit update to RPC reply handler
  xprtrdma: Remove rl_mr field, and the mr_chunk union
  xprtrdma: Remove rpcrdma_ep::rep_ia
  xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprt
  xprtrdma: Clean up hdrlen
  xprtrdma: Display XIDs in host byte order
  xprtrdma: Modernize htonl and ntohl
  ...
2015-02-03 11:54:58 -05:00
Chuck Lever
a0a1d50cd1 xprtrdma: Update the GFP flags used in xprt_rdma_allocate()
Reflect the more conservative approach used in the socket transport's
version of this transport method. An RPC buffer allocation should
avoid forcing not just FS activity, but any I/O.

In particular, two recent changes missed updating xprtrdma:

 - Commit c6c8fe79a8 ("net, sunrpc: suppress allocation warning ...")
 - Commit a564b8f039 ("nfs: enable swap on NFS")

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 12:18:48 -05:00
Chuck Lever
df515ca7b3 xprtrdma: Clean up after adding regbuf management
rpcrdma_{de}register_internal() are used only in verbs.c now.

MAX_RPCRDMAHDR is no longer used and can be removed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
c05fbb5a59 xprtrdma: Allocate zero pad separately from rpcrdma_buffer
Use the new rpcrdma_alloc_regbuf() API to shrink the amount of
contiguous memory needed for a buffer pool by moving the zero
pad buffer into a regbuf.

This is for consistency with the other uses of internally
registered memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
6b1184cd4f xprtrdma: Allocate RPC/RDMA receive buffer separately from struct rpcrdma_rep
The rr_base field is currently the buffer where RPC replies land.

An RPC/RDMA reply header lands in this buffer. In some cases an RPC
reply header also lands in this buffer, just after the RPC/RDMA
header.

The inline threshold is an agreed-on size limit for RDMA SEND
operations that pass from server and client. The sum of the
RPC/RDMA reply header size and the RPC reply header size must be
less than this threshold.

The largest RDMA RECV that the client should have to handle is the
size of the inline threshold. The receive buffer should thus be the
size of the inline threshold, and not related to RPCRDMA_MAX_SEGS.

RPC replies received via RDMA WRITE (long replies) are caught in
rq_rcv_buf, which is the second half of the RPC send buffer. Ie,
such replies are not involved in any way with rr_base.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
85275c874e xprtrdma: Allocate RPC/RDMA send buffer separately from struct rpcrdma_req
The rl_base field is currently the buffer where each RPC/RDMA call
header is built.

The inline threshold is an agreed-on size limit to for RDMA SEND
operations that pass between client and server. The sum of the
RPC/RDMA header size and the RPC header size must be less than or
equal to this threshold.

Increasing the r/wsize maximum will require MAX_SEGS to grow
significantly, but the inline threshold size won't change (both
sides agree on it). The server's inline threshold doesn't change.

Since an RPC/RDMA header can never be larger than the inline
threshold, make all RPC/RDMA header buffers the size of the
inline threshold.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
0ca77dc372 xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req
Because internal memory registration is an expensive and synchronous
operation, xprtrdma pre-registers send and receive buffers at mount
time, and then re-uses them for each RPC.

A "hardway" allocation is a memory allocation and registration that
replaces a send buffer during the processing of an RPC. Hardway must
be done if the RPC send buffer is too small to accommodate an RPC's
call and reply headers.

For xprtrdma, each RPC send buffer is currently part of struct
rpcrdma_req so that xprt_rdma_free(), which is passed nothing but
the address of an RPC send buffer, can find its matching struct
rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof.

That means that hardway currently has to replace a whole rpcrmda_req
when it replaces an RPC send buffer. This is often a fairly hefty
chunk of contiguous memory due to the size of the rl_segments array
and the fact that both the send and receive buffers are part of
struct rpcrdma_req.

Some obscure re-use of fields in rpcrdma_req is done so that
xprt_rdma_free() can detect replaced rpcrdma_req structs, and
restore the original.

This commit breaks apart the RPC send buffer and struct rpcrdma_req
so that increasing the size of the rl_segments array does not change
the alignment of each RPC send buffer. (Increasing rl_segments is
needed to bump up the maximum r/wsize for NFS/RDMA).

This change opens up some interesting possibilities for improving
the design of xprt_rdma_allocate().

xprt_rdma_allocate() is now the one place where RPC send buffers
are allocated or re-allocated, and they are now always left in place
by xprt_rdma_free().

A large re-allocation that includes both the rl_segments array and
the RPC send buffer is no longer needed. Send buffer re-allocation
becomes quite rare. Good send buffer alignment is guaranteed no
matter what the size of the rl_segments array is.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
9128c3e794 xprtrdma: Add struct rpcrdma_regbuf and helpers
There are several spots that allocate a buffer via kmalloc (usually
contiguously with another data structure) and then register that
buffer internally. I'd like to split the buffers out of these data
structures to allow the data structures to scale.

Start by adding functions that can kmalloc and register a buffer,
and can manage/preserve the buffer's associated ib_sge and ib_mr
fields.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:49 -05:00
Chuck Lever
1392402c40 xprtrdma: Refactor rpcrdma_buffer_create() and rpcrdma_buffer_destroy()
Move the details of how to create and destroy rpcrdma_req and
rpcrdma_rep structures into helper functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
ac920d04a7 xprtrdma: Simplify synopsis of rpcrdma_buffer_create()
Clean up: There is one call site for rpcrdma_buffer_create(). All of
the arguments there are fields of an rpcrdma_xprt.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
ce1ab9ab47 xprtrdma: Take struct ib_qp_attr and ib_qp_init_attr off the stack
Reduce stack footprint of the connection upcall handler function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
7bc7972cdd xprtrdma: Take struct ib_device_attr off the stack
Device attributes are large, and are used in more than one place.
Stash a copy in dynamically allocated memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
5ae711a246 xprtrdma: Free the pd if ib_query_qp() fails
If ib_query_qp() fails or the memory registration mode isn't
supported, don't leak the PD. An orphaned IB/core resource will
cause IB module removal to hang.

Fixes: bd7ed1d133 ("RPC/RDMA: check selected memory registration ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
afadc468eb xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprt
Clean up: The rep_func field always refers to rpcrdma_conn_func().
rep_func should have been removed by commit b45ccfd25d ("xprtrdma:
Remove MEMWINDOWS registration modes").

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
eba8ff660b xprtrdma: Move credit update to RPC reply handler
Reduce work in the receive CQ handler, which can be run at hardware
interrupt level, by moving the RPC/RDMA credit update logic to the
RPC reply handler.

This has some additional benefits: More header sanity checking is
done before trusting the incoming credit value, and the receive CQ
handler no longer touches the RPC/RDMA header (the CPU stalls while
waiting for the header contents to be brought into the cache).

This further extends work begun by commit e7ce710a88 ("xprtrdma:
Avoid deadlock when credit window is reset").

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
3eb3581066 xprtrdma: Remove rl_mr field, and the mr_chunk union
Clean up: Since commit 0ac531c183 ("xprtrdma: Remove REGISTER
memory registration mode"), the rl_mr pointer is no longer used
anywhere.

After removal, there's only a single member of the mr_chunk union,
so mr_chunk can be removed as well, in favor of a single pointer
field.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
5d410ba061 xprtrdma: Remove rpcrdma_ep::rep_ia
Clean up: This field is not used.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
5abefb861f xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprt
Clean up: Use consistent field names in struct rpcrdma_xprt.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
f2846481b4 xprtrdma: Clean up hdrlen
Clean up: Replace naked integers with a documenting macro.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
052151a979 xprtrdma: Display XIDs in host byte order
xprtsock.c and the backchannel code display XIDs in host byte order.
Follow suit in xprtrdma.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
284f4902a6 xprtrdma: Modernize htonl and ntohl
Clean up: Replace htonl and ntohl with the be32 equivalents.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:48 -05:00
Chuck Lever
8502427ccd xprtrdma: human-readable completion status
Make it easier to grep the system log for specific error conditions.

The wc.opcode field is not included because opcode numbers are
sparse, and because wc.opcode is not necessarily valid when
completion reports an error.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30 10:47:47 -05:00
Trond Myklebust
c4a7ca7749 SUNRPC: Allow waiting on memory allocation
We should be safe now, as long as we don't do GFP_IO or higher allocations

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-24 18:46:50 -05:00
Trond Myklebust
127b21b89f SUNRPC: Adjust rpciod workqueue parameters
Increase the concurrency level for rpciod threads to allow for allocations
etc that happen in the RPCSEC_GSS layer. Also note that the NFSv4 byte range
locks may now need to allocate memory from inside rpciod.

Add the WQ_HIGHPRI flag to improve latency guarantees while we're at it.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-24 18:46:49 -05:00
Jeff Layton
3c5199143b sunrpc/lockd: fix references to the BKL
The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-23 10:29:12 -05:00
Chuck Lever
a97c331f9a svcrdma: Handle additional inline content
Most NFS RPCs place their large payload argument at the end of the
RPC header (eg, NFSv3 WRITE). For NFSv3 WRITE and SYMLINK, RPC/RDMA
sends the complete RPC header inline, and the payload argument in
the read list. Data in the read list is the last part of the XDR
stream.

One important case is not like this, however. NFSv4 COMPOUND is a
counted array of operations. A WRITE operation, with its large data
payload, can appear in the middle of the compound's operations
array. Thus NFSv4 WRITE compounds can have header content after the
WRITE payload.

The Linux client, for example, performs an NFSv4 WRITE like this:

  { PUTFH, WRITE, GETATTR }

Though RFC 5667 is not precise about this, the proper way to convey
this compound is to place the GETATTR inline, _after_ the front of
the RPC header. The receiver inserts the read list payload into the
XDR stream after the initial WRITE arguments, and before the GETATTR
operation, thanks to the value of the read list "position" field.

The Linux client currently sends the GETATTR at the end of the
RPC/RDMA read list, which is incorrect. It will be corrected in the
future.

The Linux server currently rejects NFSv4 compounds with inline
content after the read list. For the above NFSv4 WRITE compound, the
NFS compound header indicates there are three operations, but the
server finds nonsense when it looks in the XDR stream for the third
operation, and the compound fails with OP_ILLEGAL.

Move trailing inline content to the end of the XDR buffer's page
list. This presents incoming NFSv4 WRITE compounds to NFSD in the
same way the socket transport does.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:49 -05:00
Chuck Lever
fcbeced5b4 svcrdma: Move read list XDR round-up logic
This is a pre-requisite for a subsequent patch.

Read list XDR round-up needs to be done _before_ additional inline
content is copied to the end of the XDR buffer's page list. Move
the logic added by commit e560e3b510 ("svcrdma: Add zero padding
if the client doesn't send it").

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:48 -05:00
Chuck Lever
0b056c224b svcrdma: Support RDMA_NOMSG requests
Currently the Linux server can not decode RDMA_NOMSG type requests.
Operations whose length exceeds the fixed size of RDMA SEND buffers,
like large NFSv4 CREATE(NF4LNK) operations, must be conveyed via
RDMA_NOMSG.

For an RDMA_MSG type request, the client sends the RPC/RDMA, RPC
headers, and some or all of the NFS arguments via RDMA SEND.

For an RDMA_NOMSG type request, the client sends just the RPC/RDMA
header via RDMA SEND. The request's read list contains elements for
the entire RPC message, including the RPC header.

NFSD expects the RPC/RMDA header and RPC header to be contiguous in
page zero of the XDR buffer. Add logic in the RDMA READ path to make
the read list contents land where the server prefers, when the
incoming message is a type RDMA_NOMSG message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:47 -05:00
Chuck Lever
61edbcb7c7 svcrdma: rc_position sanity checking
An RPC/RDMA client may send large RPC arguments via a read
list. This is a list of scatter/gather elements which convey
RPC call arguments too large to fit in a small RDMA SEND.

Each entry in the read list has a "position" field, whose value is
the byte offset in the XDR stream where the data in that entry is to
be inserted. Entries which share the same "position" value make up
the same RPC argument. The receiver inserts entries with the same
position field value in list order into the XDR stream.

Currently the Linux NFS/RDMA server cannot handle receiving read
chunks in more than one position, mostly because no current client
sends read lists with elements in more than one position. As a
sanity check, ensure that all received chunks have the same
"rc_position."

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:47 -05:00
Chuck Lever
e54524111f svcrdma: Plant reader function in struct svcxprt_rdma
The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:46 -05:00
Chuck Lever
e5523bd281 svcrdma: Find rmsgp more reliably
xdr_start() can return the wrong rmsgp address if an assumption
about how the xdr_buf was constructed changes.  When it gets it
wrong, the client receives a reply that has gibberish in the
RPC/RDMA header, preventing it from matching a waiting RPC request.

Instead, make (and document) just one assumption: that the RDMA
header for the client's RPC call is at the start of the first page
in rq_pages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:45 -05:00
Chuck Lever
3fe04ee9f9 svcrdma: Scrub BUG_ON() and WARN_ON() call sites
Current convention is to avoid using BUG_ON() in places where an
oops could cause complete system failure.

Replace BUG_ON() call sites in svcrdma with an assertion error
message and allow execution to continue safely.

Some BUG_ON() calls are removed because they have never fired in
production (that we are aware of).

Some WARN_ON() calls are also replaced where a back trace is not
helpful; e.g., in a workqueue task.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:45 -05:00
Chuck Lever
2397aa8b51 svcrdma: Clean up read chunk counting
The byte_count argument is not used, and the function is called
only from one place.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:44 -05:00
Chuck Lever
83f2bedfc6 svcrdma: Remove unused variable
Nit: remove an unused variable to squelch a compiler warning.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:43 -05:00
Chuck Lever
597561bf6a svcrdma: Clean up dprintk
Nit: Fix inconsistent white space in dprintk messages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-15 15:01:43 -05:00
J. Bruce Fields
49a068f82a rpc: fix xdr_truncate_encode to handle buffer ending on page boundary
A struct xdr_stream at a page boundary might point to the end of one
page or the beginning of the next, but xdr_truncate_encode isn't
prepared to handle the former.

This can cause corruption of NFSv4 READDIR replies in the case that a
readdir entry that would have exceeded the client's dircount/maxcount
limit would have ended exactly on a 4k page boundary.  You're more
likely to hit this case on large directories.

Other xdr_truncate_encode callers are probably also affected.

Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: 3e19ce762b "rpc: xdr_truncate_encode"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-01-07 14:03:58 -05:00
Andy Shevchenko
1b2e122d16 sunrpc/cache: convert to use string_escape_str()
There is nice kernel helper to escape a given strings by provided rules. Let's
use it instead of custom approach.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[bfields@redhat.com: fix length calculation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:30:20 -05:00
Jeff Layton
acf06a7fa1 sunrpc: only call test_bit once in svc_xprt_received
...move the WARN_ON_ONCE inside the following if block since they use
the same condition.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:29:14 -05:00
Jeff Layton
83a712e0af sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
These were useful when I was tracking down a race condition between
svc_xprt_do_enqueue and svc_get_next_xprt.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:29:14 -05:00
Jeff Layton
b1691bc03d sunrpc: convert to lockless lookup of queued server threads
Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.

Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.

Note that we do still have a potential atomicity problem however with
this approach.  We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.

To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.

With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.

That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.

If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it.  All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:22 -05:00
Jeff Layton
403c7b4444 sunrpc: fix potential races in pool_stats collection
In a later patch, we'll be removing some spinlocking around the socket
and thread queueing code in order to fix some contention problems. At
that point, the stats counters will no longer be protected by the
sp_lock.

Change the counters to atomic_long_t fields, except for the
"sockets_queued" counter which will still be manipulated under a
spinlock.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:22 -05:00
Jeff Layton
812443865c sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
...also make the manipulation of sp_all_threads list use RCU-friendly
functions.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:22 -05:00
Jeff Layton
0b5707e452 sunrpc: require svc_create callers to pass in meaningful shutdown routine
Currently all svc_create callers pass in NULL for the shutdown parm,
which then gets fixed up to be svc_rpcb_cleanup if the service uses
rpcbind.

Simplify this by instead having the the only caller that requires it
(lockd) pass in svc_rpcb_cleanup and get rid of the special casing.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:21 -05:00
Jeff Layton
ceff739c53 sunrpc: have svc_wake_up only deal with pool 0
The way that svc_wake_up works is a bit inefficient. It walks all of the
available pools for a service and either wakes up a task in each one or
sets the SP_TASK_PENDING flag in each one.

When svc_wake_up is called, there is no need to wake up more than one
thread to do this work. In practice, only lockd currently uses this
function and it's single threaded anyway. Thus, this just boils down to
doing a wake up of a thread in pool 0 or setting a single flag.

Eliminate the for loop in this function and change it to just operate on
pool 0. Also update the comments that sit above it and get rid of some
code that has been commented out for years now.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:21 -05:00
Jeff Layton
4d5db3f536 sunrpc: convert sp_task_pending flag to use atomic bitops
In a later patch, we'll want to be able to handle this flag without
holding the sp_lock. Change this field to an unsigned long flags
field, and declare a new flag in it that can be managed with atomic
bitops.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:21 -05:00
Jeff Layton
779fb0f3af sunrpc: move rq_splice_ok flag into rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:21 -05:00
Jeff Layton
78b65eb3fd sunrpc: move rq_dropme flag into rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:20 -05:00
Jeff Layton
30660e04b0 sunrpc: move rq_usedeferral flag to rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:20 -05:00
Jeff Layton
7501cc2bcf sunrpc: move rq_local field to rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:21:21 -05:00
Jeff Layton
4d152e2c9a sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:21:20 -05:00
J. Bruce Fields
2941b0e91b NFS client updates for Linux 3.19
Highlights include:
 
 Features:
 - NFSv4.2 client support for hole punching and preallocation.
 - Further RPC/RDMA client improvements.
 - Add more RPC transport debugging tracepoints.
 - Add RPC debugging tools in debugfs.
 
 Bugfixes:
 - Stable fix for layoutget error handling
 - Fix a change in COMMIT behaviour resulting from the recent io code updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUhRVTAAoJEGcL54qWCgDyfeUP/RoFo3ImTMbGxfcPJqoELjcO
 lZbQ+27pOE/whFDkWgiOVTwlgGct5a0WRo7GCZmpYJA4q1kmSv4ngTb3nMTCUztt
 xMJ0mBr0BqttVs+ouKiVPm3cejQXedEhttwWcloIXS8lNenlpL29Zlrx2NHdU8UU
 13+souocj0dwIyTYYS/4Lm9KpuCYnpDBpP5ShvQjVaMe/GxJo6GyZu70c7FgwGNz
 Nh9onzZV3mz1elhfizlV38aVA7KWVXtLWIqOFIKlT2fa4nWB8Hc07miR5UeOK0/h
 r+icnF2qCQe83MbjOxYNxIKB6uiA/4xwVc90X4AQ7F0RX8XPWHIQWG5tlkC9jrCQ
 3RGzYshWDc9Ud2mXtLMyVQxHVVYlFAe1WtdP8ZWb1oxDInmhrarnWeNyECz9xGKu
 VzIDZzeq9G8slJXATWGRfPsYr+Ihpzcen4QQw58cakUBcqEJrYEhlEOfLovM71k3
 /S/jSHBAbQqiw4LPMw87bA5A6+ZKcVSsNE0XCtNnhmqFpLc1kKRrl5vaN+QMk5tJ
 v4/zR0fPqH7SGAJWYs4brdfahyejEo0TwgpDs7KHmu1W9zQ0LCVTaYnQuUmQjta6
 WyYwIy3TTibdfR191O0E3NOW82Q/k/NBD6ySvabN9HqQ9eSk6+rzrWAslXCbYohb
 BJfzcQfDdx+lsyhjeTx9
 =wOP3
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.19-1' into nfsd for-3.19 branch

Mainly what I need is 860a0d9e51 "sunrpc: add some tracepoints in
svc_rqst handling functions", which subsequent server rpc patches from
jlayton depend on.  I'm merging this later tag on the assumption that's
more likely to be a tested and stable point.
2014-12-09 11:12:26 -05:00
Jeff Layton
067f96ef17 sunrpc: release svc_pool_map reference when serv allocation fails
Currently, it leaks when the allocation fails.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-01 12:45:27 -07:00
Jeff Layton
8d65ef760d sunrpc: eliminate the XPT_DETACHED flag
All it does is indicate whether a xprt has already been deleted from
a list or not, which is unnecessary since we use list_del_init and it's
always set and checked under the sv_lock anyway.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-01 12:45:26 -07:00
Jeff Layton
388f0c7767 sunrpc: add a debugfs rpc_xprt directory with an info file in it
Add a new directory heirarchy under the debugfs sunrpc/ directory:

    sunrpc/
        rpc_xprt/
            <xprt id>/

Within that directory, we can put files that give info about the
xprts. We do have the (minor) problem that there is no succinct,
unique identifier for rpc_xprts. So we generate them synthetically
with a static atomic_t counter.

For now, this directory just holds an "info" file, but we may add
other files to it in the future.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-27 13:14:52 -05:00
Jeff Layton
b4b9d2ccf0 sunrpc: add debugfs file for displaying client rpc_task queue
It's possible to get a dump of the RPC task queue by writing a value to
/proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get
a dump of the RPC client task list into the log buffer. This is a rather
inconvenient interface however, and makes it hard to get immediate info
about the task queue.

Add a new directory hierarchy under debugfs:

    sunrpc/
        rpc_clnt/
            <clientid>/

Within each clientid directory we create a new "tasks" file that will
dump info similar to what shows up in the log buffer, but with a few
small differences -- we avoid printing raw kernel addresses in favor of
symbolic names and the XID is also displayed.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-27 13:14:51 -05:00
Trond Myklebust
ea5264138d NFS: Client side changes for RDMA
These patches various bugfixes and cleanups for using NFS over RDMA, including
 better error handling and performance improvements by using pad optimization.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUdPv2AAoJENfLVL+wpUDrJkMQAKjtPZHLMcj+eHm4f1ZKLJxy
 GSrUZV21TU9tL0NVE/5An8US6hoLwHpNXsW8o+gHTAeGRyiCmIaNXGd1Ql/4PYRH
 zfzdNXoaJAh1N5iXX11fF3gOWqx/SolqzO2xLDVETK/3lAvq0VwMYoMElBQB6qQW
 8sN3z8yVuz/9Ia9oGIFhqu1B6dcKPHkQDMtmsElGxeEX/+9yEg4HUKx+kZDtV0Uj
 8/JM8Jh1FKRCQT/P6INkRItdY5KaSJGFc43BkC/8lbugfxa5XCyu/m/qMr9FJsDV
 nM6rwaiVcmR/mvD3fL82+Jg/M+P9VUHQ1/Az0sV9G+fEoHH/1Mey3LfMzNpUmf9v
 bykrPRuzXkPPQgN1VnjSaF2RF+CWwV9Nme1VVXM/zj8gHX1mcmQF/wPRxDuLjCrt
 EObAFsvHOwDTZZmYp9bG5kc6IvwvT8aeeVQMJ4q4PSGD3w8AtoIyJDn+Ee0LFD1K
 Zw0oZpTJpI4t7DVxGBSdo2wZWuMU/UKqGqGtGJ+ljXfTRuuq968Q5j5ujaA9vf0v
 C9igYTU8hq4teMzhZrfR1jtTWoSS+5zamb1KtvAZy8gsht2PQVgE9xka2k/AV8uE
 ul/w5HU4OV+QIrHNbiu7BE8B2Ags6smpdHMqn9fqLBwvG+JEwbWqk1zeTsajxzq+
 hkvKkkMq6JjDbsDf96Yk
 =YIru
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next

Pull NFS client RDMA changes for 3.19 from Anna Schumaker:
 "NFS: Client side changes for RDMA

  These patches various bugfixes and cleanups for using NFS over RDMA, including
  better error handling and performance improvements by using pad optimization.

  Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"

* tag 'nfs-rdma-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
  xprtrdma: Display async errors
  xprtrdma: Enable pad optimization
  xprtrdma: Re-write rpcrdma_flush_cqs()
  xprtrdma: Refactor tasklet scheduling
  xprtrdma: unmap all FMRs during transport disconnect
  xprtrdma: Cap req_cqinit
  xprtrdma: Return an errno from rpcrdma_register_external()
2014-11-26 17:37:13 -05:00
Trond Myklebust
1702562db4 NFS: Generic client side changes from Chuck
These patches fixes for iostats and SETCLIENTID in addition to cleaning
 up the nfs4_init_callback() function.
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUdfhQAAoJENfLVL+wpUDr9x4QANWmG6xjEU7RuIBLalOoxit6
 eXnEDNZlwYp6NCkYktHVWaTqXdwq7fdGX+3p4eiwNg3C3SrJHkpWvjeFd4KT/SyP
 B/w3vYG3o5H01i3Mb5kCD2uW0gbS9soZXpIg+uHHOl43yZzneC0vPTLhQ/h+9zPc
 B32XcgQhvLIHR3LWrC/+uolsa31lcyya0W45PX+iCpzHF7i9qRBrNLODkTlw1hNQ
 eEnYIvVy5oW00zlHJUYiTHP3e+0EJn5PAngdYbqiboJ9mK7DbB0QDwqyvJbIT7ql
 WAip6cNcJnSv1eiVYqDwlR1ok8drK5X7yQCT3lcLzAMDznLsSAL1Itu0h2Ay3z61
 f8XCyTwI0izq0DbdrMcPoqPSitqyM8nkPElnOuitXwzEroPaG40OF67yss3+ixbl
 JeQZ+u35pnpCkKUaZdCK3Pn83StxmUaBcFx8eg30NBc0SN13Eiz6aZcGEperClrR
 RwMLDUhUtAMcMRunRRxiN9lHafPqqeDeJre7uky0p0sU9CsH+1n5qIKLmk+Ber2d
 ZS29TobdR7ktfjQ52XazMAIFzI7r1v4Zn7ziH/WRbvKoKw9ICcyoUGNy9CS5LyWu
 BxWCZAJmby5H1i7V7ituJK8TImb81L4aPW06hHX9k+0SoTrgFjas//4jZYfysJ9N
 PvR0MRNfMFhuBlsTj7Gy
 =PMdS
 -----END PGP SIGNATURE-----

Merge tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next

Pull pull additional NFS client changes for 3.19 from Anna Schumaker:
  "NFS: Generic client side changes from Chuck

  These patches fixes for iostats and SETCLIENTID in addition to cleaning
  up the nfs4_init_callback() function.

  Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"

* tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
  NFS: Clean up nfs4_init_callback()
  NFS: SETCLIENTID XDR buffer sizes are incorrect
  SUNRPC: serialize iostats updates
2014-11-26 17:34:14 -05:00
Chuck Lever
edef1297f3 SUNRPC: serialize iostats updates
Occasionally mountstats reports a negative retransmission rate.
Ensure that two RPCs completing concurrently don't confuse the sums
in the transport's op_metrics array.

Since pNFS filelayout can invoke rpc_count_iostats() on another
transport from xprt_release(), we can't rely on simply holding the
transport_lock in xprt_release(). There's nothing for it but hard
serialization. One spin lock per RPC operation should make this as
painless as it can be.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 16:22:15 -05:00
Chuck Lever
7ff11de1ba xprtrdma: Display async errors
An async error upcall is a hard error, and should be reported in
the system log.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
d5440e27d3 xprtrdma: Enable pad optimization
The Linux NFS/RDMA server used to reject NFSv3 WRITE requests when
pad optimization was enabled. That bug was fixed by commit
e560e3b510 ("svcrdma: Add zero padding if the client doesn't send
it").

We can now enable pad optimization on the client, which helps
performance and is supported now by both Linux and Solaris servers.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
5c166bef4f xprtrdma: Re-write rpcrdma_flush_cqs()
Currently rpcrdma_flush_cqs() attempts to avoid code duplication,
and simply invokes rpcrdma_recvcq_upcall and rpcrdma_sendcq_upcall.

1. rpcrdma_flush_cqs() can run concurrently with provider upcalls.
   Both flush_cqs() and the upcalls were invoking ib_poll_cq() in
   different threads using the same wc buffers (ep->rep_recv_wcs
   and ep->rep_send_wcs), added by commit 1c00dd0776 ("xprtrmda:
   Reduce calls to ib_poll_cq() in completion handlers").

   During transport disconnect processing, this sometimes resulted
   in the same reply getting added to the rpcrdma_tasklets_g list
   more than once, which corrupted the list.

2. The upcall functions drain only a limited number of CQEs,
   thanks to the poll budget added by commit 8301a2c047
   ("xprtrdma: Limit work done by completion handler").

Fixes: a7bc211ac9 ("xprtrdma: On disconnect, don't ignore ... ")
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=276
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
f1a03b76fe xprtrdma: Refactor tasklet scheduling
Restore the separate function that schedules the reply handling
tasklet. I need to call it from two different paths.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
467c9674bc xprtrdma: unmap all FMRs during transport disconnect
When using RPCRDMA_MTHCAFMR memory registration, after a few
transport disconnect / reconnect cycles, ib_map_phys_fmr() starts to
return EINVAL because the provider has exhausted its map pool.

Make sure that all FMRs are unmapped during transport disconnect,
and that ->send_request remarshals them during an RPC retransmit.
This resets the transport's MRs to ensure that none are leaked
during a disconnect.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
e7104a2a96 xprtrdma: Cap req_cqinit
Recent work made FRMR registration and invalidation completions
unsignaled. This greatly reduces the adapter interrupt rate.

Every so often, however, a posted send Work Request is allowed to
signal. Otherwise, the provider's Work Queue will wrap and the
workload will hang.

The number of Work Requests that are allowed to remain unsignaled is
determined by the value of req_cqinit. Currently, this is set to the
size of the send Work Queue divided by two, minus 1.

For FRMR, the send Work Queue is the maximum number of concurrent
RPCs (currently 32) times the maximum number of Work Requests an
RPC might use (currently 7, though some adapters may need more).

For mlx4, this is 224 entries. This leaves completion signaling
disabled for 111 send Work Requests.

Some providers hold back dispatching Work Requests until a CQE is
generated.  If completions are disabled, then no CQEs are generated
for quite some time, and that can stall the Work Queue.

I've seen this occur running xfstests generic/113 over NFSv4, where
eventually, posting a FAST_REG_MR Work Request fails with -ENOMEM
because the Work Queue has overflowed. The connection is dropped
and re-established.

Cap the rep_cqinit setting so completions are not left turned off
for too long.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=269
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Chuck Lever
92b98361f1 xprtrdma: Return an errno from rpcrdma_register_external()
The RPC/RDMA send_request method and the chunk registration code
expects an errno from the registration function. This allows
the upper layers to distinguish between a recoverable failure
(for example, temporary memory exhaustion) and a hard failure
(for example, a bug in the registration logic).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25 13:39:20 -05:00
Jeff Layton
1306729b0d sunrpc: eliminate RPC_TRACEPOINTS
It's always set to the same value as CONFIG_TRACEPOINTS, so we can just
use that instead.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 17:33:12 -05:00
Jeff Layton
f895b252d4 sunrpc: eliminate RPC_DEBUG
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 17:31:46 -05:00
Jeff Layton
1a867a0898 sunrpc: add tracepoints in xs_tcp_data_recv
Add tracepoints inside the main loop on xs_tcp_data_recv that allow
us to keep an eye on what's happening during each phase of it.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:35 -05:00
Jeff Layton
3705ad64f1 sunrpc: add new tracepoints in xprt handling code
...so we can keep track of when calls are sent and replies received.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:35 -05:00
Jeff Layton
860a0d9e51 sunrpc: add some tracepoints in svc_rqst handling functions
...just around svc_send, svc_recv and svc_process for now.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:34 -05:00
J. Bruce Fields
56429e9b3b merge nfs bugfixes into nfsd for-3.19 branch
In addition to nfsd bugfixes, there are some fixes in -rc5 for client
bugs that can interfere with my testing.
2014-11-19 12:06:30 -05:00
Trond Myklebust
093a1468b6 SUNRPC: Fix locking around callback channel reply receive
Both xprt_lookup_rqst() and xprt_complete_rqst() require that you
take the transport lock in order to avoid races with xprt_transmit().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-11-19 12:03:20 -05:00
Jeff Layton
b3ecba0967 sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor
Bruce reported that he was seeing the following BUG pop:

    BUG: sleeping function called from invalid context at mm/slab.c:2846
    in_atomic(): 0, irqs_disabled(): 0, pid: 4539, name: mount.nfs
    2 locks held by mount.nfs/4539:
    #0:  (nfs_clid_init_mutex){+.+.+.}, at: [<ffffffffa01c0a9a>] nfs4_discover_server_trunking+0x4a/0x2f0 [nfsv4]
    #1:  (rcu_read_lock){......}, at: [<ffffffffa00e3185>] gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss]
    Preemption disabled at:[<ffffffff81a4f082>] printk+0x4d/0x4f

    CPU: 3 PID: 4539 Comm: mount.nfs Not tainted 3.18.0-rc1-00013-g5b095e9 #3393
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    ffff880021499390 ffff8800381476a8 ffffffff81a534cf 0000000000000001
    0000000000000000 ffff8800381476c8 ffffffff81097854 00000000000000d0
    0000000000000018 ffff880038147718 ffffffff8118e4f3 0000000020479f00
    Call Trace:
    [<ffffffff81a534cf>] dump_stack+0x4f/0x7c
    [<ffffffff81097854>] __might_sleep+0x114/0x180
    [<ffffffff8118e4f3>] __kmalloc+0x1a3/0x280
    [<ffffffffa00e31d8>] gss_stringify_acceptor+0x58/0xb0 [auth_rpcgss]
    [<ffffffffa00e3185>] ? gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss]
    [<ffffffffa006b438>] rpcauth_stringify_acceptor+0x18/0x30 [sunrpc]
    [<ffffffffa01b0469>] nfs4_proc_setclientid+0x199/0x380 [nfsv4]
    [<ffffffffa01b04d0>] ? nfs4_proc_setclientid+0x200/0x380 [nfsv4]
    [<ffffffffa01bdf1a>] nfs40_discover_server_trunking+0xda/0x150 [nfsv4]
    [<ffffffffa01bde45>] ? nfs40_discover_server_trunking+0x5/0x150 [nfsv4]
    [<ffffffffa01c0acf>] nfs4_discover_server_trunking+0x7f/0x2f0 [nfsv4]
    [<ffffffffa01c8e24>] nfs4_init_client+0x104/0x2f0 [nfsv4]
    [<ffffffffa01539b4>] nfs_get_client+0x314/0x3f0 [nfs]
    [<ffffffffa0153780>] ? nfs_get_client+0xe0/0x3f0 [nfs]
    [<ffffffffa01c83aa>] nfs4_set_client+0x8a/0x110 [nfsv4]
    [<ffffffffa0069708>] ? __rpc_init_priority_wait_queue+0xa8/0xf0 [sunrpc]
    [<ffffffffa01c9b2f>] nfs4_create_server+0x12f/0x390 [nfsv4]
    [<ffffffffa01c1472>] nfs4_remote_mount+0x32/0x60 [nfsv4]
    [<ffffffff81196489>] mount_fs+0x39/0x1b0
    [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20
    [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150
    [<ffffffffa01c1396>] nfs_do_root_mount+0x86/0xc0 [nfsv4]
    [<ffffffffa01c1784>] nfs4_try_mount+0x44/0xc0 [nfsv4]
    [<ffffffffa01549b7>] ? get_nfs_version+0x27/0x90 [nfs]
    [<ffffffffa0161a2d>] nfs_fs_mount+0x47d/0xd60 [nfs]
    [<ffffffff81a59c5e>] ? mutex_unlock+0xe/0x10
    [<ffffffffa01606a0>] ? nfs_remount+0x430/0x430 [nfs]
    [<ffffffffa01609c0>] ? nfs_clone_super+0x140/0x140 [nfs]
    [<ffffffff81196489>] mount_fs+0x39/0x1b0
    [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20
    [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150
    [<ffffffff811b5830>] do_mount+0x210/0xbe0
    [<ffffffff811b54ca>] ? copy_mount_options+0x3a/0x160
    [<ffffffff811b651f>] SyS_mount+0x6f/0xb0
    [<ffffffff81a5c852>] system_call_fastpath+0x12/0x17

Sleeping under the rcu_read_lock is bad. This patch fixes it by dropping
the rcu_read_lock before doing the allocation and then reacquiring it
and redoing the dereference before doing the copy. If we find that the
string has somehow grown in the meantime, we'll reallocate and try again.

Cc: <stable@vger.kernel.org> # v3.17+
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-13 13:15:49 -05:00
Dan Carpenter
eb63192bb8 SUNRPC: off by one in BUG_ON()
The m->pool_to[] array has "maxpools" number of elements.  It's
allocated in svc_pool_map_alloc_arrays() which we called earlier in the
function.  This test should be >= instead of >.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-29 11:37:42 -04:00
J. Bruce Fields
280caac078 rpc: change comments to assertions
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-23 14:05:11 -04:00
J. Bruce Fields
ed38c06998 RPC: remove unneeded checks from xdr_truncate_encode()
Thanks to Andrea Arcangeli for pointing out these checks are
obviously unnecessary given the preceding calculations.

Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-23 14:05:11 -04:00
Linus Torvalds
6dea0737bc Merge branch 'for-3.18' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "Highlights:

   - support the NFSv4.2 SEEK operation (allowing clients to support
     SEEK_HOLE/SEEK_DATA), thanks to Anna.
   - end the grace period early in a number of cases, mitigating a
     long-standing annoyance, thanks to Jeff
   - improve SMP scalability, thanks to Trond"

* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
  nfsd: eliminate "to_delegation" define
  NFSD: Implement SEEK
  NFSD: Add generic v4.2 infrastructure
  svcrdma: advertise the correct max payload
  nfsd: introduce nfsd4_callback_ops
  nfsd: split nfsd4_callback initialization and use
  nfsd: introduce a generic nfsd4_cb
  nfsd: remove nfsd4_callback.cb_op
  nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
  nfsd: fix nfsd4_cb_recall_done error handling
  nfsd4: clarify how grace period ends
  nfsd4: stop grace_time update at end of grace period
  nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
  nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
  nfsd: serialize nfsdcltrack upcalls for a particular client
  nfsd: pass extra info in env vars to upcalls to allow for early grace period end
  nfsd: add a v4_end_grace file to /proc/fs/nfsd
  lockd: add a /proc/fs/lockd/nlm_end_grace file
  nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
  nfsd: remove redundant boot_time parm from grace_done client tracking op
  ...
2014-10-08 12:51:44 -04:00
Trond Myklebust
72c23f0819 Merge branch 'bugfixes' into linux-next
* bugfixes:
  NFSv4.1: Fix an NFSv4.1 state renewal regression
  NFSv4: fix open/lock state recovery error handling
  NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
  NFS: Fabricate fscache server index key correctly
  SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT
  nfs: fix duplicate proc entries
2014-09-30 17:21:41 -04:00
Steve Wise
7e5be28827 svcrdma: advertise the correct max payload
Svcrdma currently advertises 1MB, which is too large.  The correct value
is the minimum of RPCSVC_MAXPAYLOAD and the max scatter-gather allowed
in an NFSRDMA IO chunk * the host page size. This bug is usually benign
because the Linux X64 NFSRDMA client correctly limits the payload size to
the correct value (64*4096 = 256KB).  But if the Linux client is PPC64
with a 64KB page size, then the client will indeed use a payload size
that will overflow the server.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-09-29 14:35:18 -04:00
Trond Myklebust
2aca5b869a SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT
The flag RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT was intended introduced in
order to allow NFSv4 clients to disable resend timeouts. Since those
cause the RPC layer to break the connection, they mess up the duplicate
reply caches that remain indexed on the port number in NFSv4..

This patch includes the code that was missing in the original to
set the appropriate flag in struct rpc_clnt, when the caller of
rpc_create() sets RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT.

Fixes: 8a19a0b6cb (SUNRPC: Add RPC task and client level options to...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-25 21:25:17 -04:00
NeilBrown
1aff525629 NFS/SUNRPC: Remove other deadlock-avoidance mechanisms in nfs_release_page()
Now that nfs_release_page() doesn't block indefinitely, other deadlock
avoidance mechanisms aren't needed.
 - it doesn't hurt for kswapd to block occasionally.  If it doesn't
   want to block it would clear __GFP_WAIT.  The current_is_kswapd()
   was only added to avoid deadlocks and we have a new approach for
   that.
 - memory allocation in the SUNRPC layer can very rarely try to
   ->releasepage() a page it is trying to handle.  The deadlock
   is removed as nfs_release_page() doesn't block indefinitely.

So we don't need to set PF_FSTRANS for sunrpc network operations any
more.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-25 08:25:47 -04:00
Jason Baron
3dedbb5ca1 rpc: Add -EPERM processing for xs_udp_send_request()
If an iptables drop rule is added for an nfs server, the client can end up in
a softlockup. Because of the way that xs_sendpages() is structured, the -EPERM
is ignored since the prior bits of the packet may have been successfully queued
and thus xs_sendpages() returns a non-zero value. Then, xs_udp_send_request()
thinks that because some bits were queued it should return -EAGAIN. We then try
the request again and again, resulting in cpu spinning. Reproducer:

1) open a file on the nfs server '/nfs/foo' (mounted using udp)
2) iptables -A OUTPUT -d <nfs server ip> -j DROP
3) write to /nfs/foo
4) close /nfs/foo
5) iptables -D OUTPUT -d <nfs server ip> -j DROP

The softlockup occurs in step 4 above.

The previous patch, allows xs_sendpages() to return both a sent count and
any error values that may have occurred. Thus, if we get an -EPERM, return
that to the higher level code.

With this patch in place we can successfully abort the above sequence and
avoid the softlockup.

I also tried the above test case on an nfs mount on tcp and although the system
does not softlockup, I still ended up with the 'hung_task' firing after 120
seconds, due to the i/o being stuck. The tcp case appears a bit harder to fix,
since -EPERM appears to get ignored much lower down in the stack and does not
propogate up to xs_sendpages(). This case is not quite as insidious as the
softlockup and it is not addressed here.

Reported-by: Yigong Lou <ylou@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24 23:13:46 -04:00
Jason Baron
f279cd008f rpc: return sent and err from xs_sendpages()
If an error is returned after the first bits of a packet have already been
successfully queued, xs_sendpages() will return a positive 'int' value
indicating success. Callers seem to treat this as -EAGAIN.

However, there are cases where its not a question of waiting for the write
queue to drain. For example, when there is an iptables rule dropping packets
to the destination, the lower level code can return -EPERM only after parts
of the packet have been successfully queued. In this case, we can end up
continuously retrying resulting in a kernel softlockup.

This patch is intended to make no changes in behavior but is in preparation for
subsequent patches that can make decisions based on both on the number of bytes
sent by xs_sendpages() and any errors that may have be returned.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24 23:13:37 -04:00
Benjamin Coddington
a743419f42 SUNRPC: Don't wake tasks during connection abort
When aborting a connection to preserve source ports, don't wake the task in
xs_error_report.  This allows tasks with RPC_TASK_SOFTCONN to succeed if the
connection needs to be re-established since it preserves the task's status
instead of setting it to the status of the aborting kernel_connect().

This may also avoid a potential conflict on the socket's lock.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24 23:06:56 -04:00
Chris Perl
0f7a622ca6 rpc: xs_bind - do not bind when requesting a random ephemeral port
When attempting to establish a local ephemeral endpoint for a TCP or UDP
socket, do not explicitly call bind, instead let it happen implicilty when the
socket is first used.

The main motivating factor for this change is when TCP runs out of unique
ephemeral ports (i.e.  cannot find any ephemeral ports which are not a part of
*any* TCP connection).  In this situation if you explicitly call bind, then the
call will fail with EADDRINUSE.  However, if you allow the allocation of an
ephemeral port to happen implicitly as part of connect (or other functions),
then ephemeral ports can be reused, so long as the combination of (local_ip,
local_port, remote_ip, remote_port) is unique for TCP sockets on the system.

This doesn't matter for UDP sockets, but it seemed easiest to treat TCP and UDP
sockets the same.

This can allow mount.nfs(8) to continue to function successfully, even in the
face of misbehaving applications which are creating a large number of TCP
connections.

Signed-off-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 12:47:00 -07:00
Chuck Lever
71efecb3f5 sunrpc: fix byte-swapping of displayed XID
xprt_lookup_rqst() and bc_send_request() display a byte-swapped XID,
but receive_cb_reply() does not.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-28 16:00:07 -04:00
J. Bruce Fields
ae89254da6 SUNRPC: Fix compile on non-x86
current_task appears to be x86-only, oops.

Let's just delete this check entirely:

Any developer that adds a new user without setting rq_task will get a
crash the first time they test it.  I also don't think there are
normally any important locks held here, and I can't see any other reason
why killing a server thread would bring the whole box down.

So the effort to fail gracefully here looks like overkill.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 983c684466 "SUNRPC: get rid of the request wait queue"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-28 15:51:35 -04:00
Trond Myklebust
f8d1ff47b6 SUNRPC: Optimise away svc_recv_available
We really do not want to do ioctls in the server's fast path. Instead, let's
use the fact that we managed to read a full record as the indicator that
we should try to read the socket again.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:11 -04:00
Trond Myklebust
0c0746d03e SUNRPC: More optimisations of svc_xprt_enqueue()
Just move the transport locking out of the spin lock protected area
altogether.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:11 -04:00
Trond Myklebust
a4aa8054a6 SUNRPC: Fix broken kthread_should_stop test in svc_get_next_xprt
We should definitely not be exiting svc_get_next_xprt() with the
thread enqueued. Fix this by ensuring that we fall through to
the dequeue.
Also move the test itself outside the spin lock protected section.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:11 -04:00
Trond Myklebust
983c684466 SUNRPC: get rid of the request wait queue
We're always _only_ waking up tasks from within the sp_threads list, so
we know that they are enqueued and alive. The rq_wait waitqueue is just
a distraction with extra atomic semantics.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:11 -04:00
Trond Myklebust
106f359cf4 SUNRPC: Do not grab pool->sp_lock unnecessarily in svc_get_next_xprt
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:10 -04:00
Trond Myklebust
9e5b208dc9 SUNRPC: Do not override wspace tests in svc_handle_xprt
We already determined that there was enough wspace when we
called svc_xprt_enqueue.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:10 -04:00
Linus Torvalds
06b8ab5528 NFS client updates for Linux 3.17
Highlights include:
 
 - Stable fix for a bug in nfs3_list_one_acl()
 - Speed up NFS path walks by supporting LOOKUP_RCU
 - More read/write code cleanups
 - pNFS fixes for layout return on close
 - Fixes for the RCU handling in the rpcsec_gss code
 - More NFS/RDMA fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT65zoAAoJEGcL54qWCgDyvq8QAJ+OKuC5dpngrZ13i4ZJIcK1
 TJSkWCr44FhYPlrmkLCntsGX6C0376oFEtJ5uqloqK0+/QtvwRNVSQMKaJopKIVY
 mR4En0WwpigxVQdW2lgto6bfOhzMVO+llVdmicEVrU8eeSThATxGNv7rxRzWorvL
 RX3TwBkWSc0kLtPi66VRFQ1z+gg5I0kngyyhsKnLOaHHtpTYP2JDZlRPRkokXPUg
 nmNedmC3JrFFkarroFIfYr54Qit2GW/eI2zVhOwHGCb45j4b2wntZ6wr7LpUdv3A
 OGDBzw59cTpcx3Hij9CFvLYVV9IJJHBNd2MJqdQRtgWFfs+aTkZdk4uilUJCIzZh
 f4BujQAlm/4X1HbPxsSvkCRKga7mesGM7e0sBDPHC1vu0mSaY1cakcj2kQLTpbQ7
 gqa1cR3pZ+4shCq37cLwWU0w1yElYe1c4otjSCttPCrAjXbXJZSFzYnHm8DwKROR
 t+yEDRL5BIXPu1nEtSnD2+xTQ3vUIYXooZWEmqLKgRtBTtPmgSn9Vd8P1OQXmMNo
 VJyFXyjNx5WH06Wbc/jLzQ1/cyhuPmJWWyWMJlVROyv+FXk9DJUFBZuTkpMrIPcF
 NlBXLV1GnA7PzMD9Xt9bwqteERZl6fOUDJLWS9P74kTk5c2kD+m+GaqC/rBTKKXc
 ivr2s7aIDV48jhnwBSVL
 =KE07
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for a bug in nfs3_list_one_acl()
   - speed up NFS path walks by supporting LOOKUP_RCU
   - more read/write code cleanups
   - pNFS fixes for layout return on close
   - fixes for the RCU handling in the rpcsec_gss code
   - more NFS/RDMA fixes"

* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  nfs: reject changes to resvport and sharecache during remount
  NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
  SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
  NFS: fix two problems in lookup_revalidate in RCU-walk
  NFS: allow lockless access to access_cache
  NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
  NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
  NFS: support RCU_WALK in nfs_permission()
  sunrpc/auth: allow lockless (rcu) lookup of credential cache.
  NFS: prepare for RCU-walk support but pushing tests later in code.
  NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
  NFS: add checks for returned value of try_module_get()
  nfs: clear_request_commit while holding i_lock
  pnfs: add pnfs_put_lseg_async
  pnfs: find swapped pages on pnfs commit lists too
  nfs: fix comment and add warn_on for PG_INODE_REF
  nfs: check wait_on_bit_lock err in page_group_lock
  sunrpc: remove "ec" argument from encrypt_v2 operation
  sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
  sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
  ...
2014-08-13 18:13:19 -06:00
Linus Torvalds
0d10c2c170 Merge branch 'for-3.17' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "This includes a major rewrite of the NFSv4 state code, which has
  always depended on a single mutex.  As an example, open creates are no
  longer serialized, fixing a performance regression on NFSv3->NFSv4
  upgrades.  Thanks to Jeff, Trond, and Benny, and to Christoph for
  review.

  Also some RDMA fixes from Chuck Lever and Steve Wise, and
  miscellaneous fixes from Kinglong Mee and others"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
  svcrdma: remove rdma_create_qp() failure recovery logic
  nfsd: add some comments to the nfsd4 object definitions
  nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
  nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
  nfsd: remove nfs4_lock_state: nfs4_laundromat
  nfsd: Remove nfs4_lock_state(): reclaim_complete()
  nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
  nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
  nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
  nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
  nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
  nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
  nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
  nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
  nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
  nfsd: remove old fault injection infrastructure
  nfsd: add more granular locking to *_delegations fault injectors
  nfsd: add more granular locking to forget_openowners fault injector
  nfsd: add more granular locking to forget_locks fault injector
  nfsd: add a list_head arg to nfsd_foreach_client_lock
  ...
2014-08-09 14:31:18 -07:00
Steve Wise
d1e458fe67 svcrdma: remove rdma_create_qp() failure recovery logic
In svc_rdma_accept(), if rdma_create_qp() fails, there is useless
logic to try and call rdma_create_qp() again with reduced sge depths.
The assumption, I guess, was that perhaps the initial sge depths
chosen were too big.  However they initial depths are selected based
on the rdma device attribute max_sge returned from ib_query_device().
If rdma_create_qp() fails, it would not be because the max_send_sge and
max_recv_sge values passed in exceed the device's max.  So just remove
this code.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05 16:09:21 -04:00
NeilBrown
122a8cda6a SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
current_cred() can only be changed by 'current', and
cred->group_info is never changed.  If a new group_info is
needed, a new 'cred' is created.

Consequently it is always safe to access
   current_cred()->group_info

without taking any further references.
So drop the refcounting and the incorrect rcu_dereference().

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-04 09:22:08 -04:00
NeilBrown
bd95608053 sunrpc/auth: allow lockless (rcu) lookup of credential cache.
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking,
does not take a reference on the returned credential, and returns
-ECHILD if a simple lookup was not possible.

The returned value can only be used within an rcu_read_lock protected
region.

The main user of this is the new rpc_lookup_cred_nonblock() which
returns a pointer to the current credential which is only rcu-safe (no
ref-count held), and might return -ECHILD if allocation was required.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 17:14:12 -04:00
Jeff Layton
ec25422c66 sunrpc: remove "ec" argument from encrypt_v2 operation
It's always 0.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 17:05:24 -04:00
Jeff Layton
b36e9c44af sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
Fix the endianness handling in gss_wrap_kerberos_v1 and drop the memset
call there in favor of setting the filler bytes directly.

In gss_wrap_kerberos_v2, get rid of the "ec" variable which is always
zero, and drop the endianness conversion of 0. Sparse handles 0 as a
special case, so it's not necessary.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 17:05:24 -04:00
Jeff Layton
6ac0fbbfc1 sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
Use u16 pointer in setup_token and setup_token_v2. None of the fields
are actually handled as __be16, so this simplifies the code a bit. Also
get rid of some unneeded pointer increments.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 17:05:23 -04:00
Jeff Layton
c5e6aecd03 sunrpc: fix RCU handling of gc_ctx field
The handling of the gc_ctx pointer only seems to be partially RCU-safe.
The assignment and freeing are done using RCU, but many places in the
code seem to dereference that pointer without proper RCU safeguards.

Fix them to use rcu_dereference and to rcu_read_lock/unlock, and to
properly handle the case where the pointer is NULL.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 17:05:23 -04:00
Trond Myklebust
9806755c56 Merge branch 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits)
  xprtrdma: Handle additional connection events
  xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
  xprtrdma: Make rpcrdma_ep_disconnect() return void
  xprtrdma: Schedule reply tasklet once per upcall
  xprtrdma: Allocate each struct rpcrdma_mw separately
  xprtrdma: Rename frmr_wr
  xprtrdma: Disable completions for LOCAL_INV Work Requests
  xprtrdma: Disable completions for FAST_REG_MR Work Requests
  xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
  xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
  xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
  xprtrdma: Properly handle exhaustion of the rb_mws list
  xprtrdma: Chain together all MWs in same buffer pool
  xprtrdma: Back off rkey when FAST_REG_MR fails
  xprtrdma: Unclutter struct rpcrdma_mr_seg
  xprtrdma: Don't invalidate FRMRs if registration fails
  xprtrdma: On disconnect, don't ignore pending CQEs
  xprtrdma: Update rkeys after transport reconnect
  xprtrdma: Limit data payload size for ALLPHYSICAL
  xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
  ...
2014-08-03 17:04:51 -04:00
Trond Myklebust
bae6746ff3 SUNRPC: Enforce an upper limit on the number of cached credentials
In some cases where the credentials are not often reused, we may want
to limit their total number just in order to make the negative lookups
in the hash table more manageable.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03 16:02:50 -04:00
Chuck Lever
8079fb785e xprtrdma: Handle additional connection events
Commit 38ca83a5 added RDMA_CM_EVENT_TIMEWAIT_EXIT. But that status
is relevant only for consumers that re-use their QPs on new
connections. xprtrdma creates a fresh QP on reconnection, so that
event should be explicitly ignored.

Squelch the alarming "unexpected CM event" message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:59 -04:00
Chuck Lever
a779ca5fa7 xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
Clean up.

RPCRDMA_PERSISTENT_REGISTRATION was a compile-time switch between
RPCRDMA_REGISTER mode and RPCRDMA_ALLPHYSICAL mode.  Since
RPCRDMA_REGISTER has been removed, there's no need for the extra
conditional compilation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:59 -04:00
Chuck Lever
282191cb72 xprtrdma: Make rpcrdma_ep_disconnect() return void
Clean up: The return code is used only for dprintk's that are
already redundant.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:58 -04:00
Chuck Lever
bb96193d91 xprtrdma: Schedule reply tasklet once per upcall
Minor optimization: grab rpcrdma_tk_lock_g and disable hard IRQs
just once after clearing the receive completion queue.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:58 -04:00
Chuck Lever
2e84522c2e xprtrdma: Allocate each struct rpcrdma_mw separately
Currently rpcrdma_buffer_create() allocates struct rpcrdma_mw's as
a single contiguous area of memory. It amounts to quite a bit of
memory, and there's no requirement for these to be carved from a
single piece of contiguous memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:57 -04:00
Chuck Lever
f590e878c5 xprtrdma: Rename frmr_wr
Clean up: Name frmr_wr after the opcode of the Work Request,
consistent with the send and local invalidation paths.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:57 -04:00
Chuck Lever
dab7e3b8da xprtrdma: Disable completions for LOCAL_INV Work Requests
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_INVALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:57 -04:00
Chuck Lever
050557220e xprtrdma: Disable completions for FAST_REG_MR Work Requests
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_VALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:56 -04:00
Chuck Lever
440ddad51b xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
Any FRMR arriving in rpcrdma_register_frmr_external() is now
guaranteed to be either invalid, or to be targeted by a queued
LOCAL_INV that will invalidate it before the adapter processes
the FAST_REG_MR being built here.

The problem with current arrangement of chaining a LOCAL_INV to the
FAST_REG_MR is that if the transport is not connected, the LOCAL_INV
is flushed and the FAST_REG_MR is flushed. This leaves the FRMR
valid with the old rkey. But rpcrdma_register_frmr_external() has
already bumped the in-memory rkey.

Next time through rpcrdma_register_frmr_external(), a LOCAL_INV and
FAST_REG_MR is attempted again because the FRMR is still valid. But
the rkey no longer matches the hardware's rkey, and a memory
management operation error occurs.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:56 -04:00
Chuck Lever
ddb6bebcc6 xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
When a LOCAL_INV Work Request is flushed, it leaves an FRMR in the
VALID state. This FRMR can be returned by rpcrdma_buffer_get(), and
must be knocked down in rpcrdma_register_frmr_external() before it
can be re-used.

Instead, capture these in rpcrdma_buffer_get(), and reset them.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:55 -04:00
Chuck Lever
9f9d802a28 xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
FAST_REG_MR Work Requests update a Memory Region's rkey. Rkey's are
used to block unwanted access to the memory controlled by an MR. The
rkey is passed to the receiver (the NFS server, in our case), and is
also used by xprtrdma to invalidate the MR when the RPC is complete.

When a FAST_REG_MR Work Request is flushed after a transport
disconnect, xprtrdma cannot tell whether the WR actually hit the
adapter or not. So it is indeterminant at that point whether the
existing rkey is still valid.

After the transport connection is re-established, the next
FAST_REG_MR or LOCAL_INV Work Request against that MR can sometimes
fail because the rkey value does not match what xprtrdma expects.

The only reliable way to recover in this case is to deregister and
register the MR before it is used again. These operations can be
done only in a process context, so handle it in the transport
connect worker.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:55 -04:00
Chuck Lever
c2922c0235 xprtrdma: Properly handle exhaustion of the rb_mws list
If the rb_mws list is exhausted, clean up and return NULL so that
call_allocate() will delay and try again.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:55 -04:00
Chuck Lever
3111d72c7c xprtrdma: Chain together all MWs in same buffer pool
During connection loss recovery, need to visit every MW in a
buffer pool. Any MW that is in use by an RPC will not be on the
rb_mws list.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:54 -04:00
Chuck Lever
c93e986a29 xprtrdma: Back off rkey when FAST_REG_MR fails
If posting a FAST_REG_MR Work Reqeust fails, revert the rkey update
to avoid subsequent IB_WC_MW_BIND_ERR completions.

Suggested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:54 -04:00
Chuck Lever
0dbb4108a6 xprtrdma: Unclutter struct rpcrdma_mr_seg
Clean ups:
 - make it obvious that the rl_mw field is a pointer -- allocated
   separately, not as part of struct rpcrdma_mr_seg
 - promote "struct {} frmr;" to a named type
 - promote the state enum to a named type
 - name the MW state field the same way other fields in
   rpcrdma_mw are named

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:54 -04:00
Chuck Lever
539431a437 xprtrdma: Don't invalidate FRMRs if registration fails
If FRMR registration fails, it's likely to transition the QP to the
error state. Or, registration may have failed because the QP is
_already_ in ERROR.

Thus calling rpcrdma_deregister_external() in
rpcrdma_create_chunks() is useless in FRMR mode: the LOCAL_INVs just
get flushed.

It is safe to leave existing registrations: when FRMR registration
is tried again, rpcrdma_register_frmr_external() checks if each FRMR
is already/still VALID, and knocks it down first if it is.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:53 -04:00
Chuck Lever
a7bc211ac9 xprtrdma: On disconnect, don't ignore pending CQEs
xprtrdma is currently throwing away queued completions during
a reconnect. RPC replies posted just before connection loss, or
successful completions that change the state of an FRMR, can be
missed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:53 -04:00
Chuck Lever
6ab59945f2 xprtrdma: Update rkeys after transport reconnect
Various reports of:

  rpcrdma_qp_async_error_upcall: QP error 3 on device mlx4_0
		ep ffff8800bfd3e848

Ensure that rkeys in already-marshalled RPC/RDMA headers are
refreshed after the QP has been replaced by a reconnect.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=249
Suggested-by: Selvin Xavier <Selvin.Xavier@Emulex.Com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:53 -04:00
Chuck Lever
43e9598817 xprtrdma: Limit data payload size for ALLPHYSICAL
When the client uses physical memory registration, each page in the
payload gets its own array entry in the RPC/RDMA header's chunk list.

Therefore, don't advertise a maximum payload size that would require
more array entries than can fit in the RPC buffer where RPC/RDMA
headers are built.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:52 -04:00
Chuck Lever
73806c8832 xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
Ensure ia->ri_id remains valid while invoking dma_unmap_page() or
posting LOCAL_INV during a transport reconnect. Otherwise,
ia->ri_id->device or ia->ri_id->qp is NULL, which triggers a panic.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=259
Fixes: ec62f40 'xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-07-31 16:22:52 -04:00