Commit Graph

2549 Commits

Author SHA1 Message Date
Peter Zijlstra
dfd01f0260 sched/wait: Fix the signal handling fix
Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/

His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().

We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed.  We must
instead pass the initial state along and use that.

Fixes: 68985633bc ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Chris Mason <clm@fb.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Paul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-13 14:30:59 -08:00
Trond Myklebust
756b9b37cf SUNRPC: Fix callback channel
The NFSv4.1 callback channel is currently broken because the receive
message will keep shrinking because the backchannel receive buffer size
never gets reset.
The easiest solution to this problem is instead of changing the receive
buffer, to rather adjust the copied request.

Fixes: 38b7631fbe ("nfs4: limit callback decoding to received bytes")
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-07 13:04:59 -08:00
Linus Torvalds
071f5d105a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...
2015-12-03 16:02:46 -08:00
Eric Dumazet
9cd3e072b0 net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00
Benjamin Coddington
38b7631fbe nfs4: limit callback decoding to received bytes
A truncated cb_compound request will cause the client to decode null or
data from a previous callback for nfs4.1 backchannel case, or uninitialized
data for the nfs4.0 case. This is because the path through
svc_process_common() advances the request's iov_base and decrements iov_len
without adjusting the overall xdr_buf's len field.  That causes
xdr_init_decode() to set up the xdr_stream with an incorrect length in
nfs4_callback_compound().

Fixing this for the nfs4.1 backchannel case first requires setting the
correct iov_len and page_len based on the length of received data in the
same manner as the nfs4.0 case.

Then the request's xdr_buf length can be adjusted for both cases based upon
the remaining iov_len and page_len.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 22:03:15 -05:00
Linus Torvalds
31c1febd7a Mainly smaller bugfixes and cleanup. We're still finding some bugs from
the breakup of the big NFSv4 state lock in 3.17--thanks especially to
 Andrew Elble and Jeff Layton for tracking down some of the remaining
 races.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQ51oAAoJECebzXlCjuG+b1AP+wWamMNw8eS0N98+KslfTMNd
 BFcOFp6L5Hv1VRuwl67V9UUNS+9y5rsgWh9gMnQe5yPZ+dVABbO6mKfh3f7HJ2zg
 aGzmE9ZdTMejjRDpSHHMEqxYePlxGVgxVhr8CgnzgkXf6KBEy3emfDlFIocgFWdR
 JGWEhfOoOa+H7b3Awq3KxlxhAajq1ic14un2CLxTYdvjshwhlIjnscY1F7vNiNRg
 O/ELQRKCCSNZbwGSV/OhNUXx3VQPQUh1eMvIfSD3Fs6AtMybIWGW5Fc36jxZJKt2
 kllcEfukRnGa+Ezl/hwBWd1pEVMwmkYhNRt+9LtH8uWG4+uT5i3Mxn4taDYg8618
 plp2GtRoC3VwOvUKEcKl3HhlRBu5H4zJtx9x60NDzAgNUtoKG/Dl7rhm7o7QwUk8
 W3k0jYAryoyx+12fYO0dssdM4pj1Gi7nRGR687lKzXXttktbQF88ZS9EHhI3oFiC
 Ak8ilEeap8ND1KIJY6Z2xr925BPpw+P2GXbd/Mr5H0aX3a3WM3wLPXlToZbve5EP
 haYnTqbHw9QzqbLDcki8s0hNgv+xwlQWopoInGijfr3IAHQMpKStI0WxhyTYsb8g
 0xyRWA1COnj5WvgznbkMky7Q45T27q26EFgaS8+LEJ1rtEpmNDZOaycbwym6XQHk
 1oyydIRSWM3c7eWnDvFG
 =wRg0
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.4' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Apologies for coming a little late in the merge window.  Fortunately
  this is another fairly quiet one:

  Mainly smaller bugfixes and cleanup.  We're still finding some bugs
  from the breakup of the big NFSv4 state lock in 3.17 -- thanks
  especially to Andrew Elble and Jeff Layton for tracking down some of
  the remaining races"

* tag 'nfsd-4.4' of git://linux-nfs.org/~bfields/linux:
  svcrpc: document lack of some memory barriers
  nfsd: fix race with open / open upgrade stateids
  nfsd: eliminate sending duplicate and repeated delegations
  nfsd: remove recurring workqueue job to clean DRC
  SUNRPC: drop stale comment in svc_setup_socket()
  nfsd: ensure that seqid morphing operations are atomic wrt to copies
  nfsd: serialize layout stateid morphing operations
  nfsd: improve client_has_state to check for unused openowners
  nfsd: fix clid_inuse on mount with security change
  sunrpc/cache: make cache flushing more reliable.
  nfsd: move include of state.h from trace.c to trace.h
  sunrpc: avoid warning in gss_key_timeout
  lockd: get rid of reference-counted NSM RPC clients
  SUNRPC: Use MSG_SENDPAGE_NOTLAST when calling sendpage()
  lockd: create NSM handles per net namespace
  nfsd: switch unsigned char flags in svc_fh to bools
  nfsd: move svc_fh->fh_maxsize to just after fh_handle
  nfsd: drop null test before destroy functions
  nfsd: serialize state seqid morphing operations
2015-11-11 20:11:28 -08:00
J. Bruce Fields
0442f14b15 svcrpc: document lack of some memory barriers
We're missing memory barriers in net/sunrpc/svcsock.c in some spots we'd
expect them.  But it doesn't appear they're necessary in our case, and
this is likely a hot path--for now just document the odd behavior.

Kosuke Tatsukawa found this issue while looking through the linux source
code for places calling waitqueue_active() before wake_up*(), but
without preceding memory barriers, after sending a patch to fix a
similar issue in drivers/tty/n_tty.c  (Details about the original issue
can be found here: https://lkml.org/lkml/2015/9/28/849).

Reported-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 17:02:47 -05:00
Stefan Hajnoczi
ea833f5de3 SUNRPC: drop stale comment in svc_setup_socket()
The svc_setup_socket() function does set the send and receive buffer
sizes, so the comment is out-of-date:

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 09:25:50 -05:00
Linus Torvalds
e6604ecb70 NFS client updates for Linux 4.4
Highlights include:
 
 Features:
 - RDMA client backchannel from Chuck
 - Support for NFSv4.2 file CLONE using the btrfs ioctl
 
 Bugfixes + cleanups
 - Move socket data receive out of the bottom halves and into a workqueue
 - Refactor NFSv4 error handling so synchronous and asynchronous RPC handles
   errors identically.
 - Fix a panic when blocks or object layouts reads return a bad data length
 - Fix nfsroot so it can handle a 1024 byte long path.
 - Fix bad usage of page offset in bl_read_pagelist
 - Various NFSv4 callback cleanups+fixes
 - Fix GETATTR bitmap verification
 - Support hexadecimal number for sunrpc debug sysctl files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQPMXAAoJEGcL54qWCgDy6ZUQAL32vpgyMXe7R4jcxoQxm52+
 tn8FrY8aBZAqucvQsIGCrYfE01W/s8goDTQdZODn0MCcoor12BTPVYNIR42/J/no
 MNnRTDF0dJ4WG+inX9G87XGG6sFN3wDaQcCaexknkQZlFNF4KthxojzR2BgjmRVI
 p3WKkLSNTt6DYQQ8eDetvKoDT0AjR/KCYm89tiE8GMhKYcaZl6dTazJxwOcp2CX9
 YDW6+fQbsv8qp5v2ay03e88O/DSmcNRFoxy/KUGT9OwJgdN08IN8fTt6GG38yycT
 D9tb9uObBRcll4PnucouadBcykGr6jAP0z8HklE266LH1dwYLOHQoDFdgAs0QGtq
 nlySiKvToj6CYXonXoPOjZF3P/lxlkj5ViZ2enBxgxrPmyWl172cUSa6NTXOMO46
 kPpxw50xa1gP5kkBVwIZ6XZuzl/5YRhB3BRP3g6yuJCbAwVBJvawYU7riC+6DEB9
 zygVfm21vi9juUQXJ37zXVRBTtoFhFjuSxcAYxc63o181lWYShKQ3IiRYg+zTxnq
 7DOhXa0ZNGvMgJJi0tH9Es3/S6TrGhyKh5gKY/o2XUjY0hCSsCSdP6jw6Mb9Ax1s
 0LzByHAikxBKPt2OFeoUgwycI2xqow4iAfuFk071iP7n0nwC804cUHSkGxW67dBZ
 Ve5Skkg1CV+oWQYxGmGZ
 =py1V
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  New features:
   - RDMA client backchannel from Chuck
   - Support for NFSv4.2 file CLONE using the btrfs ioctl

  Bugfixes + cleanups:
   - Move socket data receive out of the bottom halves and into a
     workqueue
   - Refactor NFSv4 error handling so synchronous and asynchronous RPC
     handles errors identically.
   - Fix a panic when blocks or object layouts reads return a bad data
     length
   - Fix nfsroot so it can handle a 1024 byte long path.
   - Fix bad usage of page offset in bl_read_pagelist
   - Various NFSv4 callback cleanups+fixes
   - Fix GETATTR bitmap verification
   - Support hexadecimal number for sunrpc debug sysctl files"

* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
  Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
  nfs: Fix GETATTR bitmap verification
  nfs: Remove unused xdr page offsets in getacl/setacl arguments
  fs/nfs: remove unnecessary new_valid_dev check
  SUNRPC: fix variable type
  NFS: Enable client side NFSv4.1 backchannel to use other transports
  pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
  pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
  SUNRPC: Remove the TCP-only restriction in bc_svc_process()
  svcrdma: Add backward direction service for RPC/RDMA transport
  xprtrdma: Handle incoming backward direction RPC calls
  xprtrdma: Add support for sending backward direction RPC replies
  xprtrdma: Pre-allocate Work Requests for backchannel
  xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
  SUNRPC: Abstract backchannel operations
  xprtrdma: Saving IRQs no longer needed for rb_lock
  xprtrdma: Remove reply tasklet
  xprtrdma: Use workqueue to process RPC/RDMA replies
  xprtrdma: Replace send and receive arrays
  xprtrdma: Refactor reply handler error handling
  ...
2015-11-09 18:11:22 -08:00
Linus Torvalds
ab9f2faf8f Initial 4.4 merge window submission
- "Checksum offload support in user space" enablement
 - Misc cxgb4 fixes, add T6 support
 - Misc usnic fixes
 - 32 bit build warning fixes
 - Misc ocrdma fixes
 - Multicast loopback prevention extension
 - Extend the GID cache to store and return attributes of GIDs
 - Misc iSER updates
 - iSER clustering update
 - Network NameSpace support for rdma CM
 - Work Request cleanup series
 - New Memory Registration API
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPO5UAAoJELgmozMOVy/dSCQP/iX2ImMZOS3VkOYKhLR3dSv8
 4vTEiYIoAT1JEXiPpiabuuACwotcZcMRk9kZ0dcWmBoFusTzKJmoDOkgAYd95XqY
 EsAyjqtzUGNNMjH5u5W+kdbaFdH9Ktq7IJvspRlJuvzC47Srax+qBxX01jrAkDgh
 4PoA3hEa2KkvkDjY2Mhvk9EWd/uflO9Ky6o0D8jUQkWtEvKBRyDjQLk30oW6wHX9
 pTWqww3dD0EXTrR+PDA88v2saKH1kZFU1Nt2eU8Bw+zlJM8hcX6U7PfRX0g3HT/J
 o+7ejTdLPWFDH35gJOU+KE519f1JbwfRjPJCqbOC9IttBB7iHSbhcpQLpWv4JV1x
 agdBeDA3TGQj3dHb2SkYMlWXCBp7q8UCbVGvvirTFzGSGU73sc6hhP+vCKvPQIlE
 Ah5tUqD7Y3mOBjvuDeIzKMLXILd5d3cH+m7Laytrf5e7fJPmBRZyOkcMh0QVElyl
 mKo+PFjghgeTFb405J7SDDw/vThVyN9HyIt7AGEzObaajzOOk9R1hkQr46XVy9TK
 yi58fl85yQ2n6TWV6NRnvkQoMy/N2HAEuXk/7HtO0PabV5w3Lo0zvXB9SnVrrVEm
 58FWRBYCWorVSdSacuDnPm0iz45WSRIb9G9sBlhEC93eXRq2rSBoy4RvyLeliHFH
 hllyhNNolI6FJ64j07Xm
 =bBIY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "This is my initial round of 4.4 merge window patches.  There are a few
  other things I wish to get in for 4.4 that aren't in this pull, as
  this represents what has gone through merge/build/run testing and not
  what is the last few items for which testing is not yet complete.

   - "Checksum offload support in user space" enablement
   - Misc cxgb4 fixes, add T6 support
   - Misc usnic fixes
   - 32 bit build warning fixes
   - Misc ocrdma fixes
   - Multicast loopback prevention extension
   - Extend the GID cache to store and return attributes of GIDs
   - Misc iSER updates
   - iSER clustering update
   - Network NameSpace support for rdma CM
   - Work Request cleanup series
   - New Memory Registration API"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (76 commits)
  IB/core, cma: Make __attribute_const__ declarations sparse-friendly
  IB/core: Remove old fast registration API
  IB/ipath: Remove fast registration from the code
  IB/hfi1: Remove fast registration from the code
  RDMA/nes: Remove old FRWR API
  IB/qib: Remove old FRWR API
  iw_cxgb4: Remove old FRWR API
  RDMA/cxgb3: Remove old FRWR API
  RDMA/ocrdma: Remove old FRWR API
  IB/mlx4: Remove old FRWR API support
  IB/mlx5: Remove old FRWR API support
  IB/srp: Dont allocate a page vector when using fast_reg
  IB/srp: Remove srp_finish_mapping
  IB/srp: Convert to new registration API
  IB/srp: Split srp_map_sg
  RDS/IW: Convert to new memory registration API
  svcrdma: Port to new memory registration API
  xprtrdma: Port to new memory registration API
  iser-target: Port to new memory registration API
  IB/iser: Port to new fast registration API
  ...
2015-11-07 13:33:07 -08:00
Kinglong Mee
941c3ff310 Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
The sunrpc debug sysctl files only accept decimal number right now.
But all the XXXDBUG_XXX macros are defined as hexadecimal.
It is not easy to set or check an separate flag.

This patch let those files support accepting hexadecimal number,
(decimal number is also supported). Also, display it as hexadecimal.

v2,
Remove duplicate parsing of '0x...', just using simple_strtol(tmpbuf, &s, 0)
Fix a bug of isspace() checking after parsing

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-03 15:56:49 -05:00
Andrzej Hajda
7fc561362d SUNRPC: fix variable type
Due to incorrect len type bc_send_request returned always zero.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-03 12:31:31 -05:00
Trond Myklebust
ac3c860c75 NFS: NFSoRDMA Client Side Changes
In addition to a variety of bugfixes, these patches are mostly geared at
 enabling both swap and backchannel support to the NFS over RDMA client.
 
 Signed-off-by: Anna Schumake <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWN9tvAAoJENfLVL+wpUDrurkP/0exWvxZb0yAxOlquyh4tmUA
 ZO2rd+aap9iyaOPYGcWGd38x3WuvoecuaT/Eu+wRGkH89sF1LMSA+GUD7Ua/Ii7r
 5spQP6tVRVswr+cK53H3fbEpQE7NTuBJB4RjivmddmduMPy678FcMSg4wfMqGwmw
 bFuCG70bYkEboIe+jiqNOzy6+Dkkn6h4pLg8S89jGj4XeV7JF9l7Cr0OfxZVWxme
 YX1y9lyIMB/dKsD8o2TjhfeSQ1TtmWDS1rw7MurIF/pIlmvTfAoivZFfflrAbOC6
 vx/wWsswLKZPJ72QrXfnRErEI+8nea5mvBvgW2xQh1GywWQI5kzdvG3lVMmvjX3I
 g5X/e6oDaPAtBXuzundQP7vE3yYTGGH+C0rBoFRHR5ThuRZyNqQY0VphQ/nz+B6b
 m5loQaxKy+qDdNH0sTwaY3KUNoP4LHzMF+15g2nVIjKLZlG+7Yx8yJwhkKx4XXzn
 t8opIcLSNb6ehlQ/Vw3smhjc6NAXecg0jEeGkL1MV0Cqpk+Uyf1JFNyDL/nJkeI+
 3zlmVDIIbPCHz7gmqhlXCN6Ql6QttgGyt5mgW0f6Q1N0Miqix6DCywu9aaprLZPJ
 O+MOZaNa/6F0KSZpPTwqZ5i7nxrBu48r8OK0HDU7FOdJ1CZXd7y7TXrXnBVco4uu
 AXVsLy/tnjAlqOy07ibB
 =Ush5
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-4.4-2' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: NFSoRDMA Client Side Changes

In addition to a variety of bugfixes, these patches are mostly geared at
enabling both swap and backchannel support to the NFS over RDMA client.

Signed-off-by: Anna Schumake <Anna.Schumaker@Netapp.com>
2015-11-02 17:09:24 -05:00
Chuck Lever
76566773a1 NFS: Enable client side NFSv4.1 backchannel to use other transports
Forechannel transports get their own "bc_up" method to create an
endpoint for the backchannel service.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Anna Schumaker: Add forward declaration of struct net to xprt.h]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 16:29:13 -05:00
Chuck Lever
0f2e3bdab6 SUNRPC: Remove the TCP-only restriction in bc_svc_process()
Allow the use of other transport classes when handling a backward
direction RPC call.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
9468431962 svcrdma: Add backward direction service for RPC/RDMA transport
On NFSv4.1 mount points, the Linux NFS client uses this transport
endpoint to receive backward direction calls and route replies back
to the NFSv4.1 server.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
63cae47005 xprtrdma: Handle incoming backward direction RPC calls
Introduce a code path in the rpcrdma_reply_handler() to catch
incoming backward direction RPC calls and route them to the ULP's
backchannel server.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
83128a60ca xprtrdma: Add support for sending backward direction RPC replies
Backward direction RPC replies are sent via the client transport's
send_request method, the same way forward direction RPC calls are
sent.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
124fa17d3e xprtrdma: Pre-allocate Work Requests for backchannel
Pre-allocate extra send and receive Work Requests needed to handle
backchannel receives and sends.

The transport doesn't know how many extra WRs to pre-allocate until
the xprt_setup_backchannel() call, but that's long after the WRs are
allocated during forechannel setup.

So, use a fixed value for now.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
f531a5dbc4 xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
xprtrdma's backward direction send and receive buffers are the same
size as the forechannel's inline threshold, and must be pre-
registered.

The consumer has no control over which receive buffer the adapter
chooses to catch an incoming backwards-direction call. Any receive
buffer can be used for either a forward reply or a backward call.
Thus both types of RPC message must all be the same size.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
42e5c3e272 SUNRPC: Abstract backchannel operations
xprt_{setup,destroy}_backchannel() won't be adequate for RPC/RMDA
bi-direction. In particular, receive buffers have to be pre-
registered and posted in order to receive incoming backchannel
requests.

Add a virtual function call to allow the insertion of appropriate
backchannel setup and destruction methods for each transport.

In addition, freeing a backchannel request is a little different
for RPC/RDMA. Introduce an rpc_xprt_op to handle the difference.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
a5b027e189 xprtrdma: Saving IRQs no longer needed for rb_lock
Now that RPC replies are processed in a workqueue, there's no need
to disable IRQs when managing send and receive buffers. This saves
noticeable overhead per RPC.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
2da9ab3008 xprtrdma: Remove reply tasklet
Clean up: The reply tasklet is no longer used.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
fe97b47cd6 xprtrdma: Use workqueue to process RPC/RDMA replies
The reply tasklet is fast, but it's single threaded. After reply
traffic saturates a single CPU, there's no more reply processing
capacity.

Replace the tasklet with a workqueue to spread reply handling across
all CPUs.  This also moves RPC/RDMA reply handling out of the soft
IRQ context and into a context that allows sleeps.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
1e465fd4ff xprtrdma: Replace send and receive arrays
The rb_send_bufs and rb_recv_bufs arrays are used to implement a
pair of stacks for keeping track of free rpcrdma_req and rpcrdma_rep
structs. Replace those arrays with free lists.

To allow more than 512 RPCs in-flight at once, each of these arrays
would be larger than a page (assuming 8-byte addresses and 4KB
pages). Allowing up to 64K in-flight RPCs (as TCP now does), each
buffer array would have to be 128 pages. That's an order-6
allocation. (Not that we're going there.)

A list is easier to expand dynamically. Instead of allocating a
larger array of pointers and copying the existing pointers to the
new array, simply append more buffers to each list.

This also makes it simpler to manage receive buffers that might
catch backwards-direction calls, or to post receive buffers in
bulk to amortize the overhead of ib_post_recv.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
b0e178a2d8 xprtrdma: Refactor reply handler error handling
Clean up: The error cases in rpcrdma_reply_handler() almost never
execute. Ensure the compiler places them out of the hot path.

No behavior change expected.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
4220a07264 xprtrdma: Prevent loss of completion signals
Commit 8301a2c047 ("xprtrdma: Limit work done by completion
handler") was supposed to prevent xprtrdma's upcall handlers from
starving other softIRQ work by letting them return to the provider
before all CQEs have been polled.

The logic assumes the provider will call the upcall handler again
immediately if the CQ is re-armed while there are still queued CQEs.

This assumption is invalid. The IBTA spec says that after a CQ is
armed, the hardware must interrupt only when a new CQE is inserted.
xprtrdma can't rely on the provider calling again, even though some
providers do.

Therefore, leaving CQEs on queue makes sense only when there is
another mechanism that ensures all remaining CQEs are consumed in a
timely fashion. xprtrdma does not have such a mechanism. If a CQE
remains queued, the transport can wait forever to send the next RPC.

Finally, move the wcs array back onto the stack to ensure that the
poll array is always local to the CPU where the completion upcall is
running.

Fixes: 8301a2c047 ("xprtrdma: Limit work done by completion ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
7b3d770c67 xprtrdma: Re-arm after missed events
ib_req_notify_cq(IB_CQ_REPORT_MISSED_EVENTS) returns a positive
value if WCs were added to a CQ after the last completion upcall
but before the CQ has been re-armed.

Commit 7f23f6f6e3 ("xprtrmda: Reduce lock contention in
completion handlers") assumed that when ib_req_notify_cq() returned
a positive RC, the CQ had also been successfully re-armed, making
it safe to return control to the provider without losing any
completion signals. That is an invalid assumption.

Change both completion handlers to continue polling while
ib_req_notify_cq() returns a positive value.

Fixes: 7f23f6f6e3 ("xprtrmda: Reduce lock contention in ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Chuck Lever
a045178887 xprtrdma: Enable swap-on-NFS/RDMA
After adding a swapfile on an NFS/RDMA mount and removing the
normal swap partition, I was able to push the NFS client well
into swap without any issue.

I forgot to swapoff the NFS file before rebooting. This pinned
the NFS mount and the IB core and provider, causing shutdown to
hang. I think this is expected and safe behavior. Probably
shutdown scripts should "swapoff -a" before unmounting any
filesystems.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Steve Wise
8610586d82 xprtrdma: don't log warnings for flushed completions
Unsignaled send WRs can get flushed as part of normal unmount, so don't
log them as warnings.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Sagi Grimberg
412a15c0fe svcrdma: Port to new memory registration API
Instead of maintaining a fastreg page list, keep an sg table
and convert an array of pages to a sg list. Then call ib_map_mr_sg
and construct ib_reg_wr.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28 22:27:18 -04:00
Sagi Grimberg
4143f34e01 xprtrdma: Port to new memory registration API
Instead of maintaining a fastreg page list, keep an sg table
and convert an array of pages to a sg list. Then call ib_map_mr_sg
and construct ib_reg_wr.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Selvin Xavier <selvin.xavier@avagotech.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28 22:27:18 -04:00
Doug Ledford
63e8790d39 Merge branch 'wr-cleanup' into k.o/for-4.4 2015-10-28 22:23:34 -04:00
Doug Ledford
eb14ab3ba1 Merge branch 'wr-cleanup' of git://git.infradead.org/users/hch/rdma into wr-cleanup
Signed-off-by: Doug Ledford <dledford@redhat.com>

Conflicts:
	drivers/infiniband/ulp/isert/ib_isert.c - Commit 4366b19ca5
	(iser-target: Change the recv buffers posting logic) changed the
	logic in isert_put_datain() and had to be hand merged
2015-10-28 22:21:09 -04:00
Guy Shapiro
fa20105e09 IB/cma: Add support for network namespaces
Add support for network namespaces in the ib_cma module. This is
accomplished by:

1. Adding network namespace parameter for rdma_create_id. This parameter is
   used to populate the network namespace field in rdma_id_private.
   rdma_create_id keeps a reference on the network namespace.
2. Using the network namespace from the rdma_id instead of init_net inside
   of ib_cma, when listening on an ID and when looking for an ID for an
   incoming request.
3. Decrementing the reference count for the appropriate network namespace
   when calling rdma_destroy_id.

In order to preserve the current behavior init_net is passed when calling
from other modules.

Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Yotam Kenneth <yotamke@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28 12:32:48 -04:00
Neil Brown
778620364e sunrpc/cache: make cache flushing more reliable.
The caches used to store sunrpc authentication information can be
flushed by writing a timestamp to a file in /proc.

This timestamp has a one-second resolution and any entry in cache that
was last_refreshed *before* that time is treated as expired.

This is problematic as it is not possible to reliably flush the cache
without interrupting NFS service.
If the current time is written to the "flush" file, any entry that was
added since the current second started will still be treated as valid.
If one second beyond than the current time is written to the file
then no entries can be valid until the second ticks over.  This will
mean that no NFS request will be handled for up to 1 second.

To resolve this issue we make two changes:

1/ treat an entry as expired if the timestamp when it was last_refreshed
  is before *or the same as* the expiry time.  This means that current
  code which writes out the current time will now flush the cache
  reliably.

2/ when a new entry in added to the cache -  set the last_refresh timestamp
  to 1 second *beyond* the current flush time, when that not in the
  past.
  This ensures that newly added entries will always be valid.

Now that we have a very reliable way to flush the cache, and also
since we are using "since-boot" timestamps which are monotonic,
change cache_purge() to set the smallest future flush_time which
will work, and leave it there: don't revert to '1'.

Also disable the setting of the 'flush_time' far into the future.
That has never been useful and is now awkward as it would cause
last_refresh times to be strange.
Finally: if a request is made to set the 'flush_time' to the current
second, assume the intent is to flush the cache and advance it, if
necessary, to 1 second beyond the current 'flush_time' so that all
active entries will be deemed to be expired.

As part of this we need to add a 'cache_detail' arg to cache_init()
and cache_fresh_locked() so they can find the current ->flush_time.

Signed-off-by: NeilBrown <neilb@suse.com>
Reported-by: Olaf Kirch <okir@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23 15:57:30 -04:00
Arnd Bergmann
cc6a7aab55 sunrpc: avoid warning in gss_key_timeout
The gss_key_timeout() function causes a harmless warning in some
configurations, e.g. ARM imx_v6_v7_defconfig with gcc-5.2, if the
compiler cannot figure out the state of the 'expire' variable across
an rcu_read_unlock():

net/sunrpc/auth_gss/auth_gss.c: In function 'gss_key_timeout':
net/sunrpc/auth_gss/auth_gss.c:1422:211: warning: 'expire' may be used uninitialized in this function [-Wmaybe-uninitialized]

To avoid this warning without adding a bogus initialization, this
rewrites the function so the comparison is done inside of the
critical section. As a side-effect, it also becomes slightly
easier to understand because the implementation now more closely
resembles the comment above it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c5e6aecd03 ("sunrpc: fix RCU handling of gc_ctx field")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23 15:57:28 -04:00
Trond Myklebust
226453d8cf SUNRPC: Use MSG_SENDPAGE_NOTLAST when calling sendpage()
If we're sending more pages via kernel_sendpage(), then set
MSG_SENDPAGE_NOTLAST.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23 15:57:27 -04:00
Doug Ledford
fc81a06965 Merge branch 'k.o/for-4.3-v1' into k.o/for-4.4
Pick up the late fixes from the 4.3 cycle so we have them in our
next branch.
2015-10-21 16:40:21 -04:00
Linus Torvalds
58bd6e0602 Changes for 4.3-rc5
- Work around connection namespace lookup bug related to RoCE
 - Change usnic license to Dual GPL/BSD (was intended to be that way
   all along, but wasn't clear, permission from contributors was
   chased down)
 - Fix an issue between NFSoRDMA and mlx5 that could cause an oops
 - Fix leak of sendonly multicast groups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWHoT/AAoJELgmozMOVy/deK4QALETCToLcR5RRDR+QleFUvby
 FnP91Pu9zGOoiuP25FT5Ny0YAmTHd1KiDQBQHRe/NrYDCH2M/q8jFJSWZLwGrG6q
 8GYc1ieozGQMZvId3ZJnqUJUTEyJu9QtpiFFZJYJHriP6OShP1GiHJ/XTN9dvJ/u
 xcmViAYYIjjScjaY1MuYpxKITFwfZE0HtdvK7zzq+F9cpfmC//Zc0Po4V4o4Y9V3
 14WgbWZyhehmECKwN95hIY1pLySadgcCxoeUDHclQ3efKLar4tEC3SOM2QZsnNRc
 qlCHEZYeB5TRo0dF/2CYUMLfUHkMjnUpW2BiVDbQfmPio7lGUjh2SBAQjI5i1dEQ
 Wg69JH1TV7BYfRiwe7n49P/BJ2vIhCR2UjQrHjilZ/h6DPSfKy29hVSvOzb5xLeJ
 mwl/KSKxlfT2Z1SZy0yMlJfCm8tjPwf6WhOVwkFRAhYHD3Yf31EMVzD7gTtW2MXO
 n5S80k5ccJlXniPWjaqerhjOZHmwHViBmHNlN4zlDCRZeT9IuKDj5mi31f7HC4gx
 WqJtSjRxydpbGPKROHI4vrmfARPAKNrKhj8BiqxO5Cja+TiS2QeXXr+fbRwETrLS
 TjXWNfS3Boy564AJ8Gfug2wfBcHwY+31Uv2a6nrMmKi+wwVexF/ENOb/x9WHZrVo
 VqQVI2lUBH2LsmzadD9c
 =usb1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "We have four batched up patches for the current rc kernel.

  Two of them are small fixes that are obvious.

  One of them is larger than I would like for a late stage rc pull, but
  we found an issue in the namespace lookup code related to RoCE and
  this works around the issue for now (we allow a lookup with a
  namespace to succeed on RoCE since RoCE namespaces aren't implemented
  yet).  This will go away in 4.4 when we put in support for namespaces
  in RoCE devices.

  The last one is large in terms of lines, but is all legal and no
  functional changes.  Cisco needed to update their files to be more
  specific about their license.  They had intended the files to be dual
  licensed as GPL/BSD all along, and specified that in their module
  license tag, but their file headers were not up to par.  They
  contacted all of the contributors to get agreement and then submitted
  a patch to update the license headers in the files.

  Summary:

   - Work around connection namespace lookup bug related to RoCE

   - Change usnic license to Dual GPL/BSD (was intended to be that way
     all along, but wasn't clear, permission from contributors was
     chased down)

   - Fix an issue between NFSoRDMA and mlx5 that could cause an oops

   - Fix leak of sendonly multicast groups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/ipoib: For sendonly join free the multicast group on leave
  IB/cma: Accept connection without a valid netdev on RoCE
  xprtrdma: Don't require LOCAL_DMA_LKEY support for fastreg
  usnic: add missing clauses to BSD license
2015-10-15 13:44:35 -07:00
Linus Torvalds
5b5f145527 Two nfsd fixes, one for an RDMA crash, one for a pnfs/block protocol
bug.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWHUj5AAoJECebzXlCjuG+KIoP/RW5zigAEKqUiD7ycKR91BxD
 9Nt0fqTTrbkGJhKM1/DN4YEjogAHeFW5OnGiLQRUNI/qdy+I1Gyr1kgwGmCCVDt9
 d8AhnxcnXR5SmsQHk7eeUd/rnODetf0bW5YJ8PfFbnC6cmM013nR9ujEccUuCl9M
 hHTp+690Doab00PtWtsjmZv5d+eT1bktY/R2PuQhyQM2CKWh1u4FeNTd1lWE551D
 b1wSvhAGMYVEsQv8+HICDrIQ8loGfH2gpBILERLM2yJlhN1IPU3RmNSAcQpZSaql
 veJYVmHdpMACCLp0Dd3hwWKDYvcQ2lCqKk+Cpd0vLpvZ8J5OjCLC+a2dh0PRIYuf
 pwFCvbWz6dn27/9eXEKbyT2JIeBIl4qwrFjfiRKlNX0c4HGKXaE2gJrY7bxnDxe1
 BatAbEFZ+rxHyPmycaj3JdyOxafmw94XzbT8q2g7tmUCj+pvAI+Pbv6PlwN6W2r7
 aGBZzgd8Y9pT6ZbCB0e413d/t5ulxwkt6vVz9Jze4gfcUrWcqHaqt7AadMl7obUx
 AYPLAVGeHybdKlLvqv42IF2QM8ZhizM0+EnxkjfWLrsa7WbstWX5KLPpm3K80dM7
 98p1ToNQDFcNU8WBZw8AkBpFz4j32RVOkvzWFWbhCo+T3is4BmP16uEEjH90aCCY
 skQKMrq8J1ox33gz5gT7
 =Pkuy
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux

Pull nfsd fixes from Bruce Fields:
 "Two nfsd fixes, one for an RDMA crash, one for a pnfs/block protocol
  bug"

* tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Fix NFS server crash triggered by 1MB NFS WRITE
  nfsd/blocklayout: accept any minlength
2015-10-13 11:31:03 -07:00
Chuck Lever
3be7f32878 svcrdma: Fix NFS server crash triggered by 1MB NFS WRITE
Now that the NFS server advertises a maximum payload size of 1MB
for RPC/RDMA again, it crashes in svc_process_common() when NFS
client sends a 1MB NFS WRITE on an NFS/RDMA mount.

The server has set up a 259 element array of struct page pointers
in rq_pages[] for each incoming request. The last element of the
array is NULL.

When an incoming request has been completely received,
rdma_read_complete() attempts to set the starting page of the
incoming page vector:

  rqstp->rq_arg.pages = &rqstp->rq_pages[head->hdr_count];

and the page to use for the reply:

  rqstp->rq_respages = &rqstp->rq_arg.pages[page_no];

But the value of page_no has already accounted for head->hdr_count.
Thus rq_respages now points past the end of the incoming pages.

For NFS WRITE operations smaller than the maximum, this is harmless.
But when the NFS WRITE operation is as large as the server's max
payload size, rq_respages now points at the last entry in rq_pages,
which is NULL.

Fixes: cc9a903d91 ('svcrdma: Change maximum server payload . . .')
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 11:55:43 -04:00
Linus Torvalds
38aa0a59a6 Just one RDMA bugfix.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWFW4mAAoJECebzXlCjuG+YQ8P/2cfPRV2QZHK0BxlHooM6WII
 ZyIOMYU9KHxtoolC7UWfTy6y+ohDzisByYS59Tpd9k0d2NWqtMgUTLHS1UbjcekF
 RBMkhqv8VLDMupiBVElaO4/FvSqhP4YTpB/YvFHn8K4i2+NnfwL4c707SlxAk2tA
 SKhvgZVIS/N+VYpQo5hFZ1RofTQ7zWsvzPEsAOJR0pbBhEFE0WemZ12nQwkdkmRI
 2/R5XbT0ngSpCBRo2OcUoCHTozJG90gVfsu8IGzs/QeqlYZ9dVxWOUh8WDP2gmDF
 iB/KrUnv+gsMg4pLKrN9pbBMi8o6zvrbe7IMNjZEhA7qqcEwgf94hViYgrGdIDlS
 pqWWf/YMYWZzT0K1U8DuqjzQyeuTjRNv7RkALBFi54kQC6T49PIDbJruerhVVdzZ
 sgmDB/4kaSJF8yutetuRogskC+E7BaqhnAqu+VDin0UCFMl2GUb+3yof7GawbQcD
 uhPNMhn94LI6zXEzd86dKCc2ZwwNRfJYpfy5gYUmRHSHllZUSQdCqT4s3oIa4eFB
 RNqd0/AulHNgRJuXX/wMPZh5IWr9AnLp1WfJXRbY6hu5Q8+btsFG1wEBuQr3USTZ
 D5yJexpVQRNSmPWllLwfXkGFY4tiJA/TNDZxwrgocamnvxdrRw82HoFNvpRKVFEn
 AZFB4UR4JbqCe4LmBV/r
 =Jent
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.3-1' of git://linux-nfs.org/~bfields/linux

Pull nfsd bugfix from Bruce Fields:
 "Just one RDMA bugfix"

* tag 'nfsd-4.3-1' of git://linux-nfs.org/~bfields/linux:
  svcrdma: handle rdma read with a non-zero initial page offset
2015-10-09 16:34:45 -07:00
Trond Myklebust
31303d6cbb SUNRPC: Use MSG_SENDPAGE_NOTLAST in xs_send_pagedata()
If we're sending more than one page via kernel_sendpage(), then set
MSG_SENDPAGE_NOTLAST between the pages so that we don't send suboptimal
frames (see commit 2f53384424 and commit 35f9c09fe9).

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-08 09:12:35 -04:00
Trond Myklebust
a26480942c SUNRPC: Move AF_LOCAL receive data path into a workqueue context
Now that we've done it for TCP and UDP, let's convert AF_LOCAL as well.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-08 08:27:05 -04:00
Trond Myklebust
f9b2ee714c SUNRPC: Move UDP receive data path into a workqueue context
Now that we've done it for TCP, let's convert UDP as well.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-08 08:27:04 -04:00
Trond Myklebust
edc1b01cd3 SUNRPC: Move TCP receive data path into a workqueue context
Stream protocols such as TCP can often build up a backlog of data to be
read due to ordering. Combine this with the fact that some workloads such
as NFS read()-intensive workloads need to receive a lot of data per RPC
call, and it turns out that receiving the data from inside a softirq
context can cause starvation.

The following patch moves the TCP data receive into a workqueue context.
We still end up calling tcp_read_sock(), but we do so from a process
context, meaning that softirqs are enabled for most of the time.

With this patch, I see a doubling of read bandwidth when running a
multi-threaded iozone workload between a virtual client and server setup.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-08 08:27:04 -04:00
Trond Myklebust
66d7a56a62 SUNRPC: Refactor TCP receive
Move the TCP data receive loop out of xs_tcp_data_ready(). Doing so
will allow us to move the data receive out of the softirq context in
a set of followup patches.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-08 08:27:04 -04:00
Christoph Hellwig
e622f2f4ad IB: split struct ib_send_wr
This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr.  This dramaticly
shrinks the size of a WR for most common operations:

sizeof(struct ib_send_wr) (old):	96

sizeof(struct ib_send_wr):		48
sizeof(struct ib_rdma_wr):		64
sizeof(struct ib_atomic_wr):		96
sizeof(struct ib_ud_wr):		88
sizeof(struct ib_fast_reg_wr):		88
sizeof(struct ib_bind_mw_wr):		96
sizeof(struct ib_sig_handover_wr):	80

And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:

sizeof(struct ib_fastreg_wr):		64

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: Haggai Eran <haggaie@mellanox.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
2015-10-08 11:09:10 +01:00
Sagi Grimberg
f022fa88ce xprtrdma: Don't require LOCAL_DMA_LKEY support for fastreg
There is no need to require LOCAL_DMA_LKEY support as the
PD allocation makes sure that there is a local_dma_lkey. Also
correctly set a return value in error path.

This caused a NULL pointer dereference in mlx5 which removed
the support for LOCAL_DMA_LKEY.

Fixes: bb6c96d728 ("xprtrdma: Replace global lkey with lkey local to PD")
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-06 14:23:00 -04:00