Commit Graph

2472 Commits

Author SHA1 Message Date
Akihiro Tsukada
87360e68b3 media: dvb-usb-v2/gl861: use usleep_range() for short delay
As the kernel doc "timers-howto.txt" reads,
short delay with msleep() can take much longer.
In a case of raspbery-pi platform where CONFIG_HZ_100 was set,
it actually affected the init of Friio devices
since it issues lots of i2c transactions with short delay.

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-05 07:15:09 -04:00
Chris Mayo
0a8b9993df media: em28xx-cards: output regular messages as info
Messages expected during device probe were being marked as errors.

Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 14:32:46 -04:00
Rainer Keller
5b1a270d22 media: dvb: add alternative USB PID for Hauppauge WinTV-soloHD
Newer DVB receivers of this type have a different USB PID.

Signed-off-by: Rainer Keller <mail@rainerkeller.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 14:20:55 -04:00
Mauro Carvalho Chehab
23ba635d45 media: lgdt330x: convert it to the new I2C binding way
Convert the driver to allow its usage with the new I2C
binding way.

Please notice that this patch doesn't convert the
callers to bind to it using the new way.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 11:09:26 -04:00
Mauro Carvalho Chehab
509f89652f media: em28xx: fix a regression with HVR-950
Commit be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner
functionality") removed the logic with sets the alternate for the DVB
device. Without setting the right alternate, the device won't be
able to submit URBs, and userspace fails with -EMSGSIZE:

	ERROR     DMX_SET_PES_FILTER failed (PID = 0x2000): 90 Message too long

Tested with Hauppauge HVR-950 model A1C0.

Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")

Cc: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 11:00:54 -04:00
Mauro Carvalho Chehab
b2c20f2f3e media: cx231xx: get rid of videobuf-dvb dependency
This driver doesn't use videobuf-dvb. So, stop adding an
unused struct and unused header on it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 10:56:57 -04:00
Mauro Carvalho Chehab
1a0c10ed7b media: dvb-usb-v2: stop using coherent memory for URBs
There's no need to use coherent buffers there. So, let the
DVB core do the allocation. That should give some performance
gain outside x86.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 10:56:19 -04:00
Mauro Carvalho Chehab
14f4eaedda media: dvbsky: fix driver unregister logic
There's a user-after-free there, if the frontend is attached
via the new I2C way:

[  112.539806] usbcore: deregistering interface driver dvb_usb_dvbsky
[  112.568489] ==================================================================
[  112.568600] BUG: KASAN: use-after-free in dvb_unregister_frontend+0x18/0xb0 [dvb_core]
[  112.568610] Read of size 8 at addr ffff8803a6f61530 by task rmmod/2246

[  112.568622] CPU: 0 PID: 2246 Comm: rmmod Not tainted 4.16.0-rc4+ #103
[  112.568624] Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
[  112.568625] Call Trace:
[  112.568631]  dump_stack+0x5c/0x7c
[  112.568636]  print_address_description+0x6a/0x270
[  112.568640]  kasan_report+0x258/0x380
[  112.568657]  ? dvb_unregister_frontend+0x18/0xb0 [dvb_core]
[  112.568673]  dvb_unregister_frontend+0x18/0xb0 [dvb_core]
[  112.568681]  dvb_usbv2_exit+0x156/0x4a0 [dvb_usb_v2]
[  112.568689]  dvb_usbv2_disconnect+0xa0/0x140 [dvb_usb_v2]
[  112.568694]  usb_unbind_interface+0xd8/0x3f0
[  112.568700]  device_release_driver_internal+0x1ce/0x2f0
[  112.568705]  driver_detach+0x66/0xc0
[  112.568709]  bus_remove_driver+0x86/0x150
[  112.568713]  usb_deregister+0x90/0x180
[  112.568718]  SyS_delete_module+0x293/0x330
[  112.568721]  ? free_module+0x330/0x330
[  112.568725]  ? _cond_resched+0x16/0x50
[  112.568729]  ? task_work_run+0x7d/0xd0
[  112.568732]  ? mem_cgroup_handle_over_high+0x1c/0xc0
[  112.568736]  ? free_module+0x330/0x330
[  112.568740]  do_syscall_64+0xe7/0x250
[  112.568744]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  112.568747] RIP: 0033:0x7facafa272a7
[  112.568749] RSP: 002b:00007fffdea14cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  112.568753] RAX: ffffffffffffffda RBX: 00007fffdea14d28 RCX: 00007facafa272a7
[  112.568755] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005599557337c8
[  112.568756] RBP: 0000559955733760 R08: 000000000000000a R09: 0000000000000000
[  112.568758] R10: 00007facafaa0280 R11: 0000000000000206 R12: 00007fffdea14ef0
[  112.568761] R13: 00007fffdea16eac R14: 0000559955733260 R15: 0000559955733760

[  112.568808] Allocated by task 638:
[  112.568816]  kasan_kmalloc+0xa0/0xd0
[  112.568820]  kmem_cache_alloc_trace+0x114/0x230
[  112.568826]  m88ds3103_probe+0x9a/0x643 [m88ds3103]
[  112.568830]  i2c_device_probe+0x2e9/0x3c0
[  112.568833]  driver_probe_device+0x46e/0x6a0
[  112.568836]  bus_for_each_drv+0xd6/0x130
[  112.568838]  __device_attach+0x166/0x1f0
[  112.568841]  bus_probe_device+0xea/0x110
[  112.568844]  device_add+0x6a3/0x9f0
[  112.568847]  i2c_new_device+0x28f/0x5c0
[  112.568861]  dvb_module_probe+0x91/0x110 [dvb_core]
[  112.568867]  dvbsky_s960c_attach+0x1c4/0x460 [dvb_usb_dvbsky]
[  112.568873]  dvb_usbv2_probe+0x1191/0x1950 [dvb_usb_v2]
[  112.568877]  usb_probe_interface+0x1b3/0x430
[  112.568880]  driver_probe_device+0x46e/0x6a0
[  112.568882]  __driver_attach+0xeb/0x110
[  112.568885]  bus_for_each_dev+0xe4/0x140
[  112.568888]  bus_add_driver+0x249/0x380
[  112.568891]  driver_register+0xc6/0x170
[  112.568893]  usb_register_driver+0xec/0x200
[  112.568896]  do_one_initcall+0x8f/0x1ee
[  112.568900]  do_init_module+0xde/0x320
[  112.568902]  load_module+0x3ed0/0x4850
[  112.568905]  SYSC_finit_module+0x192/0x1c0
[  112.568908]  do_syscall_64+0xe7/0x250
[  112.568911]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

[  112.568916] Freed by task 2246:
[  112.568923]  __kasan_slab_free+0x136/0x180
[  112.568925]  kfree+0xa5/0x1e0
[  112.568931]  m88ds3103_remove+0x42/0x60 [m88ds3103]
[  112.568934]  i2c_device_remove+0x72/0xd0
[  112.568937]  device_release_driver_internal+0x1ce/0x2f0
[  112.568940]  bus_remove_device+0x197/0x270
[  112.568942]  device_del+0x239/0x550
[  112.568945]  device_unregister+0x16/0x70
[  112.568949]  dvbsky_exit+0x4c/0x70 [dvb_usb_dvbsky]
[  112.568955]  dvb_usbv2_disconnect+0x98/0x140 [dvb_usb_v2]
[  112.568958]  usb_unbind_interface+0xd8/0x3f0
[  112.568961]  device_release_driver_internal+0x1ce/0x2f0
[  112.568964]  driver_detach+0x66/0xc0
[  112.568967]  bus_remove_driver+0x86/0x150
[  112.568970]  usb_deregister+0x90/0x180
[  112.568973]  SyS_delete_module+0x293/0x330
[  112.568976]  do_syscall_64+0xe7/0x250
[  112.568979]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

[  112.568985] The buggy address belongs to the object at ffff8803a6f61100
                which belongs to the cache kmalloc-2048 of size 2048
[  112.568998] The buggy address is located 1072 bytes inside of
                2048-byte region [ffff8803a6f61100, ffff8803a6f61900)
[  112.569008] The buggy address belongs to the page:
[  112.569015] page:ffffea000e9bd800 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0
[  112.569025] flags: 0x17ffe000008100(slab|head)
[  112.569034] raw: 0017ffe000008100 0000000000000000 0000000000000000 00000001000f000f
[  112.569044] raw: ffffea000ee2d000 0000000500000005 ffff880407002a80 0000000000000000
[  112.569053] page dumped because: kasan: bad access detected

[  112.569062] Memory state around the buggy address:
[  112.569070]  ffff8803a6f61400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  112.569079]  ffff8803a6f61480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  112.569088] >ffff8803a6f61500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  112.569095]                                      ^
[  112.569103]  ffff8803a6f61580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  112.569112]  ffff8803a6f61600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  112.569119] ==================================================================
[  112.569127] Disabling lock debugging due to kernel taint
[  112.571161] dvb_usb_v2: 'DVBSky S960CI:2-2' successfully deinitialized and disconnected

Fix it by letting the dvb-usb-v2 core to know that the frontend
was already removed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 10:55:12 -04:00
Mauro Carvalho Chehab
2c7e3ca8fb media: dvbsky: use the new dvb_module_probe() API
Instead of repeating countless times a complex logic, use
the new dvb_module_probe()/dvb_module_release(), simplifying
the module.

That reduced about 15% at the module's size:

   text	   data	    bss	    dec	    hex	filename
   7083	   1108	     12	   8203	   200b	old/drivers/media/usb/dvb-usb-v2/dvbsky.o
   5817	   1108	     12	   6937	   1b19	new/drivers/media/usb/dvb-usb-v2/dvbsky.o

Tested with a DVBSky S960C DVB-S2 tuner (0572:960c)

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 10:54:39 -04:00
Mauro Carvalho Chehab
fd901b6e81 media: em28xx: Don't use ops->resume if NULL
Changeset  be7fd3c3a8 ("media: em28xx: Hauppauge DualHD
second tuner functionality") introduced a potential NULL pointer
dereference, as pointed by Coverity:

CID 1434731 (#1 of 1): Dereference after null check (FORWARD_NULL)16. var_deref_op: Dereferencing null pointer ops->resume.

var_compare_op: Comparing ops->resume to null implies that ops->resume might be null.
1174                if (ops->resume)
1175                        ops->resume(dev);
1176                if (dev->dev_next)
1177                        ops->resume(dev->dev_next);

Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:59:02 -04:00
Hugo Grostabussiat
15b4c54ea4 media: usbtv: Use the constant for supported standards
Use the USBTV_TV_STD define instead of repeating ourselves.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:53:11 -04:00
Hugo Grostabussiat
bed6d27bcf media: usbtv: Enforce standard for color decoding
Depending on the chosen standard, configure the decoder to use the
appropriate color encoding standard (PAL-like, NTSC-like or SECAM).

Until now, the decoder was not configured for a specific color standard,
making it autodetect the color encoding.

While this may sound fine, it potentially causes the wrong image tuning
parameters to be applied (e.g. tuning parameters for NTSC are applied to
a PAL source), and may confuse users about what the actual standard is
in use.

This commit explicitly configures the color standard the decoder will
use, making it visually obvious if a wrong standard was chosen.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:52:19 -04:00
Hugo Grostabussiat
a8b48e224c media: usbtv: Keep norm parameter specific
The user-supplied norm value gets overwritten by the generic .norm
member from the norm_params. That way, we lose the specific norm the
user may want to set.

For instance, if the user specifies V4L2_STD_PAL_60, the value actually
used will be V4L2_STD_525_60, which in the end will be as if the user
had specified V4L2_STD_NTSC, since this is always the first bitfield we
match the norm value against before configuring the hardware.

The norm_params array is only there to match a norm with an output
resolution. The norm value itself should not be changed.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:50:49 -04:00
Hugo Grostabussiat
8c42d2763c media: usbtv: Use V4L2 defines to select capture resolution
Make use of the V4L2_STD_525_60 and V4L2_STD_625_50 defines to
determine the vertical resolution to use when capturing.

V4L2_STD_525_60 (resp. V4L2_STD_625_50) is the set of standards using
525 (resp. 625) lines per frame, independently of the color encoding.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:49:26 -04:00
Hugo Grostabussiat
c41e20d9cb media: usbtv: Add SECAM support
Add support for the SECAM norm, using the "AVSECAM" decoder configuration
sequence found in Windows driver's .INF file.

For reference, the "AVSECAM" sequence in the .INF file is:
0x04,0x73,0xDC,0x72,0xA2,0x90,0x35,0x01,0x30,0x04,0x08,0x2D,0x28,0x08,
0x02,0x69,0x16,0x35,0x21,0x16,0x36

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:48:49 -04:00
Hugo Grostabussiat
5c909be048 media: usbtv: Use same decoder sequence as Windows driver
Re-format the register {address, value} pairs so they follow the same
order as the decoder configuration sequences in the Windows driver's .INF
file.

For instance, for PAL, the "AVPAL" sequence in the .INF file is:
0x04,0x68,0xD3,0x72,0xA2,0xB0,0x15,0x01,0x2C,0x10,0x20,0x2e,0x08,0x02,
0x02,0x59,0x16,0x35,0x17,0x16,0x36

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:48:18 -04:00
Mauro Carvalho Chehab
3259081991 MAINTAINERS & files: Canonize the e-mails I use at files
From now on, I'll start using my @kernel.org as my development e-mail.

As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.

For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.

For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.

For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:21:06 -04:00
Kai-Heng Feng
29e61d6ef0 media: cx231xx: Add support for AverMedia DVD EZMaker 7
User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER.
Add the device to the id_table to make it work.

BugLink: https://bugs.launchpad.net/bugs/1620762

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 08:37:11 -04:00
winton.liu
732a9edc30 media: gspca: fix Kconfig help info
Documentation/video4linux/gspca.txt is missing.
It has moved to Documentation/media/v4l-drivers/gspca-cardlist.rst

Signed-off-by: winton.liu <18502523564@163.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-04 06:27:28 -04:00
Brad Love
8b1ca8a036 media: cx231xx: Increase USB bridge bandwidth
The cx231xx USB bridge has issue streaming QAM256 DVB-C channels.
QAM64 channels were fine, but QAM256 channels produced corrupted
transport streams.

cx231xx alt mode 4 does not provide enough bandwidth to acommodate
QAM256 DVB-C channels, most likely DVB-T2 channels would break up
as well. Alt mode 5 increases bridge bandwidth to 90Mbps, and
fixes QAM256 DVB-C streaming.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-04 06:27:28 -04:00
Mauro Carvalho Chehab
0d2a531d00 media: dvb-usb-v2: fix a missing dependency of I2C_MUX
Now that af9015 requires I2C_MUX, all drivers that select
it should also depend on it.

   drivers/media/dvb-frontends/af9013.o: In function `af9013_remove':
>> drivers/media/dvb-frontends/af9013.c:1560: undefined reference to `i2c_mux_del_adapters'
   drivers/media/dvb-frontends/af9013.o: In function `af9013_probe':
>> drivers/media/dvb-frontends/af9013.c:1488: undefined reference to `i2c_mux_alloc'
>> drivers/media/dvb-frontends/af9013.c:1495: undefined reference to `i2c_mux_add_adapter'
   drivers/media/dvb-frontends/af9013.c:1544: undefined reference to `i2c_mux_del_adapters'

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 08:44:37 -04:00
Mauro Carvalho Chehab
86b2989361 media: uvc: to the right check at uvc_ioctl_enum_framesizes()
While the logic there is correct, it tricks both humans and
machines, a the check if "i" var is not zero is actually to
validate if the "frames" var was initialized when the loop
ran for the first time.

That produces the following warning:
	drivers/media/usb/uvc/uvc_v4l2.c:1192 uvc_ioctl_enum_framesizes() error: potentially dereferencing uninitialized 'frame'.

Change the logic to do the right test instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 08:37:27 -04:00
Mauro Carvalho Chehab
e771bdf595 media: tm6000: avoid casting just to print pointer address
Instead of casting, just use %p.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 07:42:32 -04:00
Mauro Carvalho Chehab
728d9fd9f1 media: em28xx-input: improve error handling code
The current I2C error handling logic makes static analyzers
confused:

	drivers/media/usb/em28xx/em28xx-input.c:96 em28xx_get_key_terratec() error: uninitialized symbol 'b'.

Change it to match the coding style we're using elsewhere.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 07:33:22 -04:00
Mauro Carvalho Chehab
2be09d8d83 media: zr364xx: avoid casting just to print pointer address
Instead of casting, just use %p.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 07:31:59 -04:00
Mauro Carvalho Chehab
86f181c766 media: s2255drv: fix a casting warning
drivers/media/usb/s2255/s2255drv.c:651 s2255_fillbuff() warn: argument 3 to %08lx specifier is cast from pointer

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23 06:56:55 -04:00
Antti Palosaari
b2d109f24a media: af9015: correct some coding style issues
Correct coding style issues reported mostly by checkpatch.pl.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:16:32 -04:00
Antti Palosaari
8b79c7ab11 media: af9015: convert to regmap api
Use regmap for chip register access.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:15:34 -04:00
Antti Palosaari
19324414c9 media: dvb-usb-v2: add probe/disconnect callbacks
Add probe and disconnect callbacks that behaves similarly than ones
used commonly on Linux driver model. We need those to get early / late
access to driver in order to use normal probe time stuff, like regmap,
extra bus adapters and so.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:15:09 -04:00
Antti Palosaari
7772e380ef media: af9015: enhance streaming config
Replace static stream settings by one which enables and disables
stream interface when needed (TS streaming control).

1) Configure both TS IF and USB endpoints according to current use case

2) Disable streaming USB endpoints when streaming is stopped and
enable when streaming is started. Reduces sleep power consumption
slightly.

3) Reduce USB buffersize slightly, from 130848 to 98136 bytes

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:14:25 -04:00
Antti Palosaari
0092293ec7 media: af9015: refactor copy firmware to slave demod
Small improvements.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:13:21 -04:00
Antti Palosaari
2ffb2fa32e media: af9015: refactor firmware download
Small revise, no functional changes.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:12:55 -04:00
Antti Palosaari
ba2d559b29 media: af9015: use af9013 demod pid filters
PID filters are moved to af9013 demod driver as those are property of
demod. As pid filters are now implemented correctly by demod driver,
we could enable pid filter support for possible slave demod too on
dual tuner configuration.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:12:27 -04:00
Antti Palosaari
04c611e316 media: af9015: attach demod using i2c binding
af9013 demod driver has i2c binding. Use it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:10:48 -04:00
Antti Palosaari
49bade9f0e media: af9015: fix logging
Pass correct device to dev_* logging functions, which allows us to
remove redundant KBUILD_MODNAME and __func__ parameters from log format.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:08:03 -04:00
Johan Hovold
20f2e1aa77 media: cpia2_usb: drop bogus interface-release call
Drop bogus call to usb_driver_release_interface() from the disconnect()
callback. As the interface is already being unbound at this point,
usb_driver_release_interface() simply returns early.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:12:04 -04:00
Hans Verkuil
3aab15af9a media: add tuner standby op, use where needed
The v4l2_subdev core s_power op was used for two different things: power on/off
sensors or video decoders/encoders and to put a tuner in standby (and only the
tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner
is accessed.

The danger with calling (s_power, 0) to put a tuner into standby is that it is
usually broadcast for all subdevs. So a video receiver subdev that supports
s_power will also be powered off, and since there is no corresponding (s_power, 1)
they will never be powered on again.

In addition, this is specifically meant for tuners only since they draw the most
current.

This patch adds a new tuner op called 'standby' and replaces all calls to
(core, s_power, 0) by (tuner, standby). This prevents confusion between the two
uses of s_power. Note that there is no overlap: bridge drivers either just want
to put the tuner into standby, or they deal with powering on/off sensors. Never
both.

This also makes it easier to replace s_power for the remaining bridge drivers
with some PM code later.

Whether we want something cleaner for tuners in the future is a separate topic.
There is a lot of legacy code surrounding tuners, and I am very hesitant about
making changes there.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:05:39 -04:00
Dan Carpenter
3f127ce113 media: em28xx-cards: fix em28xx_duplicate_dev()
There is a double sizeof() typo here so we don't duplicate the struct
properly.

Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2018-03-08 06:06:51 -05:00
Brad Love
a2c52cd73f media: cx231xx: Add second i2c demod to Hauppauge 975
Hauppauge HVR-975 is a hybrid, dual frontend, single tuner USB device.
It contains lgdt3306a and si2168 frontends and one si2157 tuner. The
lgdt3306a frontend is currently enabled. This creates the second
demodulator and attaches it to the tuner.

Enables lgdt3306a|si2168 + si2157

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 04:02:15 -05:00
Brad Love
1dd2ce0e86 media: cx231xx: Use constant instead of hard code for max
Nit regarding hard coded value.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 04:01:36 -05:00
Brad Love
f83423094d media: cx231xx: Set mfe_shared if second frontend found
If frontend[1] exists, then enable the dvb adapter mfe lock system.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 04:01:05 -05:00
Brad Love
b94e47055b media: cx231xx: Use frontend i2c adapter with tuner
Utilize the i2c mux adapter returned by the frontend.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 03:59:43 -05:00
Brad Love
6b234c98f7 media: em28xx: Change hex to lower case
Coding style fix.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 03:59:18 -05:00
Tomoki Sekiyama
564246fd3f media: siano: Fix coherent memory allocation failure on arm64
On some architectures such as arm64, siano chip based TV-tuner
USB devices are not recognized correctly due to coherent memory
allocation failure with the following error:

[  663.556135] usbcore: deregistering interface driver smsusb
[  683.624809] smsusb:smsusb_probe: board id=18, interface number 0
[  683.633530] smsusb:smsusb_init_device: smscore_register_device(...) failed, rc -12
[  683.641501] smsusb:smsusb_probe: Device initialized with return code -12
[  683.652978] smsusb: probe of 1-1:1.0 failed with error -12

This is caused by dma_alloc_coherent(NULL, ...) returning NULL in
smscoreapi.c.

To fix this error, allocate the buffer memory for the USB devices
via kmalloc() and let the USB core do the DMA mapping and free.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 12:46:15 -05:00
Markus Elfring
9aa4d4ea24 media: usb: don't initialize vars if not needed
Some local variables will be set to an appropriate value before usage.
Thus omit explicit initialisations at the beginning of these functions.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 10:39:59 -05:00
Brad Love
309d4c4cc9 media: em28xx: Enable inversion for Solo/Dual HD DVB models
Hauppauge Solo/Dual HD DVB models use a si2157 tuner, which is set to
produce inverted spectrum. This configures the si2168 DVB demod for
inverted spectrum on both affected models.

[mchehab@s-opensource.com: rebased on the top of upstream]
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:47:30 -05:00
Brad Love
2af0424434 media: cx231xx: Add second i2c demod client
Include ability to add a i2c device style frontend to cx231xx USB
bridge. All current boards set to use frontend[0]. Changes are
backwards compatible with current behaviour.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:08:09 -05:00
Brad Love
bdaacc32e9 media: cx231xx: Add second frontend option
Include ability to add a second dvb attach style frontend to cx231xx
USB bridge. All current boards set to use frontend[0]. Changes are
backwards compatible with current behaviour.

[mchehab@s-opensource.com: fix some coding style issues]
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:07:52 -05:00
Stefan Brüns
1bbab525b6 media: cxusb: restore RC_MAP for MyGica T230
Commit f8585ce655 ("[media] dvb-usb-cxusb: Geniatech T230C support")
sneaked in an unrelated change for the older T230 (not C) model.

As the commit was reverted this change was reverted too,
although likely correct.

Fixes: f8585ce655 ("[media] dvb-usb-cxusb: Geniatech T230C support")
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 06:11:53 -05:00
Evgeny Plehov
c20ffbfe08 media: dvb-usb-cxusb: Geniatech T230C support
This reverts commit f8585ce655.

The T230C is handled by the dvb-usb-v2/dvbsky.c driver, which should
be preferred over a dvb-usb (v1) driver.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 06:11:48 -05:00
Brad Love
19fbf1ba2e media: cx231xx: Add support for Hauppauge HVR-975
Hauppauge HVR-975 is hybrid NTSC/PAL, QAM/ATSC, and DVB-C/T/T2 usb device.

Only ATSC/QAM front end is initially active. Second frontend support is
work in progress.

CX23102 + LG3306A/Si2168(WiP) + Si2157

Changes since v1:
- removed double semicolon

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 06:07:43 -05:00
Brad Love
c5bef50e52 media: cx231xx: Add support for Hauppauge HVR-935C
HVR-935C is hybrid PAL, DVB-C/T/T2 usb device.

CX23102 + Si2168 + Si2157

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 06:07:08 -05:00
Mauro Carvalho Chehab
f9fe90a46d media: em28xx-video: fix most coding style issues
There are a number of coding style issues at em28xx-video.
Fix most of them, by using checkpatch in strict mode to point
for it.

Automatic fixes were made with --fix-inplace, but those
were complemented by manual work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:56 -05:00
Mauro Carvalho Chehab
08cc05e4e7 media: em28xx-input: fix most coding style issues
There are a number of coding style issues at em28xx-input.
Fix most of them, by using checkpatch in strict mode to point
for it.

Automatic fixes were made with --fix-inplace, but those
were complemented by manual work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:56 -05:00
Mauro Carvalho Chehab
8adbc7d68a media: em28xx-i2c: fix most coding style issues
There are a number of coding style issues at em28xx-i2c.
Fix most of them, by using checkpatch in strict mode to point
for it.

Automatic fixes were made with --fix-inplace, but those
were complemented by manual work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:55 -05:00
Mauro Carvalho Chehab
349ac5bba1 media: em28xx-core: fix most coding style issues
There are a number of coding style issues at em28xx-core.
Fix most of them, by using checkpatch in strict mode to point
for it.

Automatic fixes were made with --fix-inplace, but those
were complemented by manual work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:55 -05:00
Mauro Carvalho Chehab
4a089668ef media: em28xx-cards: rework the em28xx probing code
There is a complex loop there with identifies the em28xx
endpoints. It has lots of identations inside, and big names,
making harder to understand.

Simplify it by moving the main logic into a static function.

While here, rename "interface" var to "intf".

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:54 -05:00
Mauro Carvalho Chehab
0086085b30 media: em28xx-cards: fix most coding style issues
There are a number of coding style issues, pointed by checkpatch
on strict mode.

Fix the ones that don't require code refactor here.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:54 -05:00
Mauro Carvalho Chehab
04964eb0eb media: em28xx-camera: fix coding style issues
There are some coding style issues at em28xx-camera.

Fix them, by using checkpatch in strict mode to point for it.
Automatic fixes with --fix-inplace were complemented by manual
work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:53 -05:00
Mauro Carvalho Chehab
9f90f5371f media: em28xx-audio: fix coding style issues
There are a number of coding style issues at em28xx-audio.
Fix them, by using checkpatch in strict mode to point for it.
Automatic fixes with --fix-inplace were complemented by manual
work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:53 -05:00
Mauro Carvalho Chehab
2e1e84c587 media: em28xx-reg.h: Fix coding style issues
Use BIT() macros and fix one comment that is not following
the Kernel coding style.

It should be noticed that the registers bit masks should be
casted to unsigned char, as, otherwise, it would produce
warnings like:

	drivers/media/usb/em28xx/em28xx-cards.c:81:33: warning: large integer implicitly truncated to unsigned type [-Woverflow]
	  {EM2820_R08_GPIO_CTRL, 0x6d,   ~EM_GPIO_4, 10},
	                                 ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:52 -05:00
Mauro Carvalho Chehab
c69ce61563 media: em28xx.h: Fix most coding style issues
There used to have a lot of coding style issues there. The
ones detected by checkpatch, in strict mode, got fixed.

Still, we need to work more on it, in order to document all
struct fields using kernel-doc macros, but this will be done
on some future patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:52 -05:00
Mauro Carvalho Chehab
f22e9e7133 media: em28xx: Add SPDX license tags where needed
Most of the files there are missing a SPDX license tag. Add.

While here fix some DRIVER_LICENSE macro in order to reflect
the source file license, as some of the headers are GPL v2
only.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:52 -05:00
Mauro Carvalho Chehab
fe8d54f0e9 media: em28xx-dvb: do some coding style improvements
As we're touching a lot on this file, let's solve several
Coding Style issues there using checkpatch --fix-inline --strict,
and manually adjusting the results.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:54:51 -05:00
Mauro Carvalho Chehab
ad05ff091f media: s5h14*.h: fix typos for CONTINUOUS
There is a typo at the several s5h14*.h headers: continuous were
spelled incorrectly.

Fix it with this script:

for i in $(git grep -l S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK); do
	sed s,S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,g -i $i
done
for i in $(git grep -l -i continous drivers/media); do sed s,CONTINOUS,CONTINUOUS,g -i $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:15:02 -05:00
Mauro Carvalho Chehab
ad32495b15 media: em28xx-dvb: simplify DVB module probing logic
The module probing logic there is a way more complex than
it should be, and requires some special magic to avoid
stack overflows when KASAN is enabled.

Solve it by creating ancillary functions to setup the
platform data and request module.

Now, the probing functions are cleaner and easier to understand.

As a side effect, the size of the module was reduced by
about 9.7% on x86_64:

Before this patch:
   text	   data	    bss	    dec	    hex	filename
  51090	  14192	     96	  65378	   ff62	drivers/media/usb/em28xx/em28xx-dvb.o

After this patch:
   text	   data	    bss	    dec	    hex	filename
  44743	  14192	     96	  59031	   e697	drivers/media/usb/em28xx/em28xx-dvb.o

Tested with a PCTV 461e device.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:08:43 -05:00
Arnd Bergmann
f410b4093f media: em28xx: split up em28xx_dvb_init to reduce stack size
With CONFIG_KASAN, the init function uses a large amount of kernel stack:

drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init.part.4':
drivers/media/usb/em28xx/em28xx-dvb.c:2061:1: error: the frame size of 3232 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Using gcc-7 with -fsanitize-address-use-after-scope makes this even worse:

drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
drivers/media/usb/em28xx/em28xx-dvb.c:2069:1: error: the frame size of 4280 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]

By splitting out each part of the switch/case statement that has its own local
variables into a separate function, no single one of them uses more than 500 bytes,
and with a noinline_for_stack annotation we can ensure that they are not merged
back together.

[mchehab@s-opensource.com: fix conflict with changeset
 be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:59:57 -05:00
Mauro Carvalho Chehab
cf68c22f10 media: em28xx: adjust I2C timeout according with I2C speed
If the I2C speed is too slow, it should wait more for an
answer.

While here, change disconnected type from char to unsigned
int, just like all other bitmask fields there at em28xx
struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:50:41 -05:00
Mauro Carvalho Chehab
0108ae7fd2 media: em28xx: constify most static structs
There are several em28xx static structs that can now be constified.

That caused a significant reduction at data segment:

Before:
   text	   data	    bss	    dec	    hex	filename
  85017	  59588	    576	 145181	  2371d	drivers/media/usb/em28xx/em28xx.o

After:
   text	   data	    bss	    dec	    hex	filename
 112345	  32292	    576	 145213	  2373d	drivers/media/usb/em28xx/em28xx.o

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:49:18 -05:00
Mauro Carvalho Chehab
aa62980be4 media: em28xx: stop rewriting device's struct
Writing at the device's struct is evil, as two em28xx devices
may be using it. So, stop abusing it, storing the values
inside struct em28xx_dev.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:48:40 -05:00
Mauro Carvalho Chehab
6cda90b63e media: em28xx: improve the logic with sets Xclk and I2C speed
The logic there should be called on two places. Also,
ideally, it should not be modifying the device struct.

So, change the logic accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:41:58 -05:00
Mauro Carvalho Chehab
d571b592c6 media: em28xx: don't use coherent buffer for DMA transfers
While coherent memory is cheap on x86, it may cause performance
impacts on other archs. As we don't have any good reason to
use it, let's change the logic by allocating memory via kmalloc()
and letting the USB core to do the DMA mapping and memory free
for us.

While here, also fixes an issue that it was not de-allocating
memories if something gets wrong during memory block
allocation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:41:34 -05:00
Brad Love
cc4406d919 media: em28xx: Enable Hauppauge SoloHD rebranded 292e SE
Add a missing device to the driver table.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:35:02 -05:00
Brad Love
f2a326c928 media: em28xx: Add Hauppauge SoloHD/DualHD bulk models
Add additional pids to driver list

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:34:44 -05:00
Brad Love
48efbc370e media: em28xx: Increase max em28xx boards to max dvb adapters
Maximum 4 em28xx boards is too low, this can be maxed out by two devices.
This allows all the dvb adapters in the system to be em28xx if so desired.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:33:54 -05:00
Brad Love
c7c7e8d780 media: em28xx: USB bulk packet size fix
Hauppauge em28xx bulk devices exhibit continuity errors and corrupted
packets, when run in VMWare virtual machines. Unknown if other
manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected.

According to documentation the maximum packet multiplier for em28xx in bulk
transfer mode is 256 * 188 bytes. This changes the size of bulk transfers
to maximum supported value and have a bonus beneficial alignment.

Before:

After:

This sets up USB to expect just as many bytes as the em28xx is set to emit.

Successful usage under load afterwards natively and in both VMWare
and KVM/Qemu virtual machines.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:33:22 -05:00
Brad Love
1b5f69f5b9 media: em28xx: Bulk transfer implementation fix
Set appropriate bulk/ISOC transfer multiplier on capture start.
This sets ISOC transfer to USB endpoint configuration
This sets bulk transfer to 48128 bytes (188 * 256)

The bulk multiplier is maximum allowed according to Empia.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:32:13 -05:00
Mauro Carvalho Chehab
0eeb232f5a media: em28xx: constify a new function
em28xx_duplicate_dev() is static. This were supposed to be
merged on the last patch, but somehow, I forgot "-a" when
I called git commit --amend.

Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:30:22 -05:00
Brad Love
be7fd3c3a8 media: em28xx: Hauppauge DualHD second tuner functionality
Implement use of secondary TS port on em28xx.
Adds has_dual_ts field, allows secondary demod/tuner to be
added to a single em28xx device.

Hauppauge DualHD models are configured to use this feature.

[mchehab@s-opensource.com: em28xx_duplicate_dev() should be static]
Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 04:19:38 -05:00
Mauro Carvalho Chehab
76bf7087fb Merge commit 'v4.16-rc4~0' into patchwork
* commit 'v4.16-rc4~0': (900 commits)
  Linux 4.16-rc4
  memremap: fix softlockup reports at teardown
  libnvdimm: re-enable deep flush for pmem devices via fsync()
  MAINTAINERS: take over Kconfig maintainership
  vfio: disable filesystem-dax page pinning
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  i2c: octeon: Prevent error message on bus error
  parisc: Reduce irq overhead when run in qemu
  parisc: Use cr16 interval timers unconditionally on qemu
  parisc: Check if secondary CPUs want own PDC calls
  parisc: Hide virtual kernel memory layout
  parisc: Fix ordering of cache and TLB flushes
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  ...
2018-03-05 07:39:06 -05:00
Antonio Cardace
c32678eac4 media: gspca: dtcs033: use %*ph to print small buffer
Use %*ph format to print small buffer as hex string.

Remove newline at the end of the format string as it would be duplicated
by the one supplied as last argument.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antonio Cardace <anto.cardace@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:14:47 -05:00
Antonio Cardace
290ef7d846 media: em28xx: use %*phC to print small buffers
Use %*phC format to print small buffers as hex strings

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antonio Cardace <anto.cardace@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:13:37 -05:00
Christopher Díaz Riveros
d2d476b705 media: s2255drv: Remove unneeded if else blocks
Given the following definitions from s2255drv.c

 #define LINE_SZ_4CIFS_NTSC      640
 #define LINE_SZ_2CIFS_NTSC      640
 #define LINE_SZ_1CIFS_NTSC      320

and

 #define LINE_SZ_4CIFS_PAL       704
 #define LINE_SZ_2CIFS_PAL       704
 #define LINE_SZ_1CIFS_PAL       352

f->fmt.pix.width possible values can be reduced to
LINE_SZ_4CIFS_NTSC or LINE_SZ_1CIFS_NTSC.

This patch removes unneeded if else blocks in vidioc_try_fmt_vid_cap
function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 07:57:38 -05:00
Ian Douglas Scott
8a695a6cfa media: usbtv: Add USB ID 1f71:3306 to the UTV007 driver
Add support for a new USB ID in this driver.

Signed-off-by: Ian Douglas Scott <ian@iandouglasscott.com>
[hans.verkuil@cisco.com: add commit message]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 07:42:47 -05:00
Oliver Neukum
50e7044535 media: usbtv: prevent double free in error case
Quoting the original report:

It looks like there is a double-free vulnerability in Linux usbtv driver
on an error path of usbtv_probe function. When audio registration fails,
usbtv_video_free function ends up freeing usbtv data structure, which
gets freed the second time under usbtv_video_fail label.

usbtv_audio_fail:

        usbtv_video_free(usbtv); =>

           v4l2_device_put(&usbtv->v4l2_dev);

              => v4l2_device_put

                  => kref_put

                      => v4l2_device_release

  => usbtv_release (CALLBACK)

                             => kfree(usbtv) (1st time)

usbtv_video_fail:

        usb_set_intfdata(intf, NULL);

        usb_put_dev(usbtv->udev);

        kfree(usbtv); (2nd time)

So, as we have refcounting, use it

Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 06:59:54 -05:00
Arnd Bergmann
c5f3f1047e media: au0828: fix VIDEO_V4L2 dependency
After the move of videobuf2 into the common directory, selecting the
au0828 driver with CONFIG_V4L2 disabled started causing a link failure,
as we now attempt to build videobuf2 but it still requires v4l2:

ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!
ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!
ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!

We want to be able to build the core au0828 support without V4L2,
so this makes the 'select' conditional on V4L2, and refines the
dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in
the exact conditions that have VIDEOBUF2_VMALLOC reachable.

Fixes: 03fbdb2fc2 ("media: move videobuf2 to drivers/media/common")
Fixes: 05439b1a36 ("[media] media: au0828 - convert to use videobuf2")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 06:57:13 -05:00
Mauro Carvalho Chehab
fdbeb96258 media: dvb: update buffer mmaped flags and frame counter
Now that we have support for a buffer counter and for
error flags, update them at DMX_DQBUF.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 11:44:08 -05:00
Arnd Bergmann
0066c764e7 media: au0828: add VIDEO_V4L2 dependency
After the move of videobuf2 into the common directory, selecting the
au0828 driver with CONFIG_V4L2 disabled started causing a link failure,
as we now attempt to build videobuf2 but it still requires v4l2:

ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined!
ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!
ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!
ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined!

This adds the same dependency in au0828 that the other users of videobuf2
have.

Fixes: 03fbdb2fc2 ("media: move videobuf2 to drivers/media/common")
Fixes: 05439b1a36 ("[media] media: au0828 - convert to use videobuf2")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 05:22:11 -05:00
Jasmin Jessich
43df6ea0c6 media: uvcvideo: Fixed ktime_t to ns conversion
Commit 828ee8c719 ("media: uvcvideo: Use ktime_t for timestamps")
changed to use ktime_t for timestamps. Older Kernels use a struct for
ktime_t, which requires the conversion function ktime_to_ns to be used on
some places. With this patch it will compile now also for older Kernel
versions.

Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:24:29 -05:00
Laurent Pinchart
f14d4988c2 media: uvcvideo: Use parentheses around sizeof operand
While the sizeof is an operator and not a function, the preferred coding
style in the kernel is to enclose its operand in parentheses. To avoid
mixing multiple coding styles in the driver, use parentheses around all
sizeof operands.

While at it replace a kmalloc() with a kmalloc_array() to silence a
checkpatch warning triggered by this patch.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:23:24 -05:00
Laurent Pinchart
2c6b222cee media: uvcvideo: Use internal kernel integer types
Replace the __[su]{8,16,32} variant of integer types with the
non-underscored types as the code is internal to the driver, not exposed
to userspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:20:52 -05:00
Laurent Pinchart
1e304c47ef media: uvcvideo: Use kernel integer types
Replace the uint_{8,16,32} types with the corresponding native kernel
types u{8,16,32}.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:17:17 -05:00
Laurent Pinchart
cb9cd6c5c3 media: uvcvideo: Drop extern keyword in function declarations
The extern keyword isn't needed to declare functions in header files.
Drop it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:16:03 -05:00
Philipp Zabel
07b7d9fc2a media: uvcvideo: Support multiple frame descriptors with the same dimensions
The Microsoft HoloLens Sensors device has two separate frame descriptors
with the same dimensions, each with a single different frame interval:

      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         1
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                           1280
        wHeight                           481
        dwMinBitRate                147763200
        dwMaxBitRate                147763200
        dwMaxVideoFrameBufferSize      615680
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  1
        dwFrameInterval( 0)            333333
      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         2
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                           1280
        wHeight                           481
        dwMinBitRate                443289600
        dwMaxBitRate                443289600
        dwMaxVideoFrameBufferSize      615680
        dwDefaultFrameInterval         111111
        bFrameIntervalType                  1
        dwFrameInterval( 0)            111111

Skip duplicate dimensions in enum_framesizes, let enum_frameintervals list
the intervals from both frame descriptors. Change set_streamparm to switch
to the correct frame index when changing the interval. This enables 90 fps
capture on a Lenovo Explorer Windows Mixed Reality headset.

[laurent.pinchart@ideasonboard.com: Renamed tmp_ival to ival]

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:10:41 -05:00
Edgar Thier
859086ae36 media: uvcvideo: Apply flags from device to actual properties
Use flags the device exposes for UVC controls.
This allows the device to define which property flags are set.

Since some cameras offer auto-adjustments for properties (e.g. auto-gain),
the values of other properties (e.g. gain) can change in the camera.
Examining the flags ensures that the driver is aware of such properties.

Signed-off-by: Edgar Thier <info@edgarthier.net>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:04:13 -05:00
Hans Verkuil
4471109e38 media: convert g/s_parm to g/s_frame_interval in subdevs
Convert all g/s_parm calls to g/s_frame_interval. This allows us
to remove the g/s_parm ops since those are a duplicate of
g/s_frame_interval.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22 12:27:35 -05:00
Linus Torvalds
a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Linus Torvalds
68c5735eaa media updates for v4.16-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJacX62AAoJEAhfPr2O5OEVjKYP/R3v+c8ztiHzaeibcZZ8IFNl
 58E0Y0yGa8OpoGJx9uqtEOamQmZoHhACfId7joIp/Jv38bgWAdbxOmk3Y4FDCFqG
 1bRrpnnmvlfabiMMfLpURLqKhf7rJMtErZkrnmmqg9P/lEMohaZUJAsgBZNfJM8l
 fZeacSnCSpzlxVcUb9Bf4vWhLk39R+xFzvFrwzbVUIHf3bDVpf4S4kNorMkhSZSF
 HaISYXqVMhpKca7CngVKytbfacUStUY01cXcjdMuB/sD7ySwdtKogbPMvrOSaexz
 G/8MB+sGT1JKUgIlh6Qv8hX805KuxBgfP19XSOH46nNU8KbYegdGhN5QXlokwI1m
 dAOiozkU93r5yBZl6QzkN3uwXe492PoLgczifg97pzAJP0BfWeFStkYqlugLTwwC
 Slmr7g3FZVJajbPl6WyioAGW7xfqBF7ftScZOHYxmhy41CWCGKJctmsJOjncyz5O
 GInEIP3KR4CgjR+iM1LoKvE+OvVo4kRc7hrcUsjQNsbfBn6xiixjwH+5M+UVvezA
 6UQpmtWGg4pX1djb8j8f6mKF8KZM12Pp3jb4Rl1cLsytN5BOBKaMEKdV3rgL+19P
 Yo0x/1wK/unkI20Om71vYyQ0nXVF9j7Tpeij5u0M57TeTVYCwloQgHmrcvQJdo8+
 Pqw5XEUiDpAIjvKp0XGh
 =H9AS
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - videobuf2 was moved to a media/common dir, as it is now used by the
   DVB subsystem too

 - Digital TV core memory mapped support interface

 - new sensor driver: ov7740

 - several improvements at ddbridge driver

 - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
   SoCs

 - new tuner driver: tda18250

 - finally got rid of all LIRC staging drivers

 - as we don't have old lirc drivers anymore, restruct the lirc device
   code

 - add support for UVC metadata

 - add a new staging driver for NVIDIA Tegra Video Decoder Engine

 - DVB kAPI headers moved to include/media

 - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
   for non-legacy APIs

 - reduce the kAPI gap for V4L2

 - lots of other driver enhancements, cleanups, etc.

* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
  media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
  media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
  media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
  media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
  media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
  media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
  media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
  media: v4l2-compat-ioctl32.c: avoid sizeof(type)
  media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
  media: v4l2-compat-ioctl32.c: fix the indentation
  media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
  media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
  media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
  media: vivid: fix module load error when enabling fb and no_error_inj=1
  media: dvb_demux: improve debug messages
  media: dvb_demux: Better handle discontinuity errors
  media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
  media: ts2020: avoid integer overflows on 32 bit machines
  media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
  media: entity: Add a nop variant of media_entity_cleanup
  ...
2018-02-06 11:27:48 -08:00
Linus Torvalds
105cf3c8c6 pci-v4.16-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJad5lgAAoJEFmIoMA60/r8s2kQAI3PztawDpaCP9Z12pkbBHSt
 Ho0xTyk9rCZi9kQJbNjc+a+QrlA3QmTHXIXerB3LSWoh7M+XhsECjem92eHpgLNS
 JvYPhTfOrCr0vdiAmOz6hD0AqN/psrbfzgiJhSwomsGEFS77k7kERSJckRv81sxb
 Aj5F/WjucAgLorwm4auveAJEQ7atE7/6pkXzoqYm4G6NLOb46jUcRGndrnvXZBlz
 fws8fBM4BHyi7i25CYQl24tFq1CGax1rIPgLg+4KnH76bQk/N6Ju0sGVSzfh+hG8
 SIerK9bJbzGRAuNKoxB3aO1dyzsK3x9WztE2mG98w5trOISPIR1FqnvC/225FWAU
 d6eIXiC7wKnEx+DElNTzCjzfHc7SAJoupO32H7CoiTe5zPUlWlxJ1zLYkK1gt50q
 m8PRBiYTglxyznzrO0drtcdjEzvbdZNRrsYnul4wi1vSHzjk6F6XLtzT10XWM1M1
 1pXLB8384FTj0Hu4bq6Y3Aivkmz0Sf+eQM2NaOwe+Zj7/1VV0d3lvi4LUXkqzLCA
 FoXPJSMxG2Qu+iflCeYRQBJjExaZH3eNLZ3dT6QpcJrjaFVedd9u5DeeFqNL27zV
 bhr8TdqrR4p4rc8EBAGoCapw96IxLZROKB3gxbrZVOpfIZpzthwHbElHX6aqUgF4
 w/EV1JWs36WXWaxFk8wd
 =ttq9
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...
2018-02-06 09:59:40 -08:00
Linus Torvalds
19e7b5f994 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "All kinds of misc stuff, without any unifying topic, from various
  people.

  Neil's d_anon patch, several bugfixes, introduction of kvmalloc
  analogue of kmemdup_user(), extending bitfield.h to deal with
  fixed-endians, assorted cleanups all over the place..."

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  alpha: osf_sys.c: use timespec64 where appropriate
  alpha: osf_sys.c: fix put_tv32 regression
  jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
  dcache: delete unused d_hash_mask
  dcache: subtract d_hash_shift from 32 in advance
  fs/buffer.c: fold init_buffer() into init_page_buffers()
  fs: fold __inode_permission() into inode_permission()
  fs: add RWF_APPEND
  sctp: use vmemdup_user() rather than badly open-coding memdup_user()
  snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
  replace_user_tlv(): switch to vmemdup_user()
  new primitive: vmemdup_user()
  memdup_user(): switch to GFP_USER
  eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
  eventfd: fold eventfd_ctx_read() into eventfd_read()
  eventfd: convert to use anon_inode_getfd()
  nfs4file: get rid of pointless include of btrfs.h
  uvc_v4l2: clean copyin/copyout up
  vme_user: don't use __copy_..._user()
  usx2y: don't bother with memdup_user() for 16-byte structure
  ...
2018-01-31 09:25:20 -08:00
Linus Torvalds
168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Mauro Carvalho Chehab
9893b905e7 media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

	dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Cc: stable@vger.kernel.org
Fixes: 4d37ece757 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2018-01-29 07:47:47 -05:00
Christoph Hellwig
8d669f93b4 media: ttusb-dec: Remove pci_zalloc_coherent() abuse
Switch to a plain kzalloc() instead of pci_zalloc_coherent() to allocate
memory for the USB DMA.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-17 18:02:46 -06:00
Christoph Hellwig
894f3009d6 media: ttusb-budget: Remove pci_zalloc_coherent() abuse
Switch to a plain kzalloc() instead of pci_zalloc_coherent() to allocate
memory for the USB DMA.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-17 18:01:35 -06:00
Mauro Carvalho Chehab
6e6a8b5a38 media: replace all <spaces><tab> occurrences
There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:15:05 -05:00
Mauro Carvalho Chehab
4a3fad709b media: fix usage of whitespaces and on indentation
On several places, whitespaces are being used for indentation,
or even at the end of the line.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:12:01 -05:00
Neil Armstrong
589266bdbf media: uvcvideo: Add a quirk for Generalplus Technology Inc. 808 Camera
As reported on [1], this device needs this quirk to be able to
reliably initialise the webcam.

[1] https://sourceforge.net/p/linux-uvc/mailman/message/33791098/

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:42:11 -05:00
Guennadi Liakhovetski
088ead2552 media: uvcvideo: Add a metadata device node
Some UVC video cameras contain metadata in their payload headers. This
patch extracts that data, adding more clock synchronisation information,
on both bulk and isochronous endpoints and makes it available to the user
space on a separate video node, using the V4L2_CAP_META_CAPTURE capability
and the V4L2_BUF_TYPE_META_CAPTURE buffer queue type. By default, only the
V4L2_META_FMT_UVC pixel format is available from those nodes. However,
cameras can be added to the device ID table to additionally specify their
own metadata format, in which case that format will also become available
from the metadata node.

[Use put_unaligned instead of __put_unaligned_cpu64]
[Use put_unaligned for the sof field as well]

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:41:47 -05:00
Guennadi Liakhovetski
3bc85817d7 media: uvcvideo: Add extensible device information
Currently the UVC driver assigns a quirk bitmask to the .driver_info
field of struct usb_device_id. This patch instroduces a struct to store
quirks and possibly other per-device parameters in the future.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:40:15 -05:00
Laurent Pinchart
94c53e26dc media: uvcvideo: Report V4L2 device caps through the video_device structure
The V4L2 core populates the struct v4l2_capability device_caps field
from the same field in video_device. There's no need to handle that
manually in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:37:58 -05:00
Laurent Pinchart
31a96f4c87 media: uvcvideo: Factor out video device registration to a function
The function will then be used to register the video device for metadata
capture.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:37:33 -05:00
Arnd Bergmann
828ee8c719 media: uvcvideo: Use ktime_t for timestamps
uvc_video_get_ts() returns a 'struct timespec', but all its users
really want a nanoseconds variable anyway.

Changing the deprecated ktime_get_ts/ktime_get_real_ts to ktime_get
and ktime_get_real simplifies the code noticeably, while keeping
the resulting numbers unchanged.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:36:59 -05:00
Arnd Bergmann
a70b8b24e7 media: uvcvideo: Use ktime_t for stats
'struct timespec' works fine here, but we try to migrate
away from it in favor of ktime_t or timespec64. In this
case, using ktime_t produces the simplest code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 06:36:27 -05:00
Julia Lawall
510bb91535 media: pvrusb2: drop unneeded newline
pvr2_trace prints a newline at the end of the message string, so the
message string does not need to include a newline explicitly.  Done
using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-03 04:49:40 -05:00
Al Viro
18e2ea5cd0 uvc_v4l2: clean copyin/copyout up
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-29 16:32:56 -05:00
Mauro Carvalho Chehab
ada795551a media: don't include drivers/media/i2c at cflags
Most of the I2C headers got moved a long time ago to
include/media/i2c. Stop including them at the patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28 14:14:09 -05:00
Mauro Carvalho Chehab
fada193559 media: move dvb kAPI headers to include/media
Except for DVB, all media kAPI headers are at include/media.

Move the headers to it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28 13:16:01 -05:00
Mauro Carvalho Chehab
c3a3d1d6b8 media: fix SPDX comment on some header files
The agreed format is to use /* */ comments inside header
files. Unfortunately, I ended by using // on a few ones.

Reported-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:15:53 -05:00
Hans Verkuil
c4b72ee8ac media: pvrusb2: correctly return V4L2_PIX_FMT_MPEG in enum_fmt
The pvrusb2 code appears to have a some old workaround code for xawtv that causes a
WARN() due to an unrecognized pixelformat 0 in v4l2_ioctl.c.

Since all other MPEG drivers fill this in correctly, it is a safe assumption that
this particular problem no longer exists.

While I'm at it, clean up the code a bit.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:01:23 -05:00
Mauro Carvalho Chehab
1ac051631a media: get rid of i2c-addr.h
In the past, the same I2C address were used on multiple places.
After I2C rebinding changes, this is no longer needed. So, we
can just get rid of this header, placing the I2C address where
they belong, e. g. either at bttv driver or at tvtuner.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 11:52:24 -05:00
Mauro Carvalho Chehab
4839c58f03 media: v4l2-dev: convert VFL_TYPE_* into an enum
Using enums makes easier to document, as it can use kernel-doc
markups. It also allows cross-referencing, with increases the
kAPI readability.

Please notice that now cx88_querycap() has to have a default for
the VFL type, as there are more types than supported by the driver.

Acked-By: Mike Isely <isely@pobox.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 11:49:40 -05:00
Sean Young
ab5222ed16 media: merge ir_tx_z8f0811_haup and ir_rx_z8f0811_haup i2c devices
These two devices ids are really just one device with multiple
addresses. Probing becomes much simpler if we simply fold this into
one i2c device with two address.

Note that this breaks the lirc_zilog driver, however we will teach
ir-kbd-i2c to do what lirc_zilog does in a later commit.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:20 -05:00
Stefan Brüns
5742240577 media: dvbsky: MyGica T230C support
Mygica T230 DVB-T/T2/C USB stick support. It uses the same FX2/Si2168
bridge/demodulator combo as the other devices supported by the driver,
but uses the Si2141 tuner.
Several DVB-T (MPEG2) and DVB-T2 (H.265) channels were tested, as well as
the included remote control.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 06:35:18 -05:00
Wolfgang Rohdewald
6cdeaed3b1 media: dvb_usb_pctv452e: module refcount changes were unbalanced
dvb_frontend will call dvb_detach for:
- stb0899_detach in dvb_frontend_release and
- stb0899_release in __dvb_frontend_free

But we only do dvb_attach(stb0899_attach).
Increment the module refcount instead.

Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-13 08:40:47 -05:00
Olli Salonen
c4d84547d5 media: dib0700: add support for Xbox One Digital TV Tuner
Xbox One Digital TV Tuner is a low-cost USB 2.0 multistandard TV tuner. It supports DVB-T, DVB-T2 and DVB-C broadcast standards.

USB bridge: DibCom 0700C
Demodulator: Panasonic MN88472
Tuner: TDA18250BHN

The demodulator requires firmware. Download one from here:
http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/latest/

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-13 08:16:53 -05:00
Matthias Schwarzott
7e132dee58 media: cx231xx: Use semicolon after assignment instead of comma
End assignments by semicolon instead of comma.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-12 05:52:59 -05:00
Matthias Schwarzott
7dbbb4bf1e media: si2165: Make checkpatch happy
Fix almost all of checkpatch --strict warnings.

The remaining warnings are about:
* macro REG16 (should be enclosed in parentheses)
* macro REG16 (Macro argument reuse)

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-12 05:33:18 -05:00
Andrey Konovalov
72c27a68a2 media: pvrusb2: properly check endpoint types
As syzkaller detected, pvrusb2 driver submits bulk urb withount checking
the the endpoint type is actually blunk. Add a check.

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2713 at drivers/usb/core/urb.c:449 usb_submit_urb+0xf8a/0x11d0
Modules linked in:
CPU: 1 PID: 2713 Comm: pvrusb2-context Not tainted
4.14.0-rc1-42251-gebb2c2437d80 #210
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88006b7a18c0 task.stack: ffff880069978000
RIP: 0010:usb_submit_urb+0xf8a/0x11d0 drivers/usb/core/urb.c:448
RSP: 0018:ffff88006997f990 EFLAGS: 00010286
RAX: 0000000000000029 RBX: ffff880063661900 RCX: 0000000000000000
RDX: 0000000000000029 RSI: ffffffff86876d60 RDI: ffffed000d32ff24
RBP: ffff88006997fa90 R08: 1ffff1000d32fdca R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000d32ff39
R13: 0000000000000001 R14: 0000000000000003 R15: ffff880068bbed68
FS:  0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001032000 CR3: 000000006a0ff000 CR4: 00000000000006f0
Call Trace:
 pvr2_send_request_ex+0xa57/0x1d80 drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3645
 pvr2_hdw_check_firmware drivers/media/usb/pvrusb2/pvrusb2-hdw.c:1812
 pvr2_hdw_setup_low drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2107
 pvr2_hdw_setup drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2250
 pvr2_hdw_initialize+0x548/0x3c10 drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2327
 pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:118
 pvr2_context_thread_func+0x361/0x8c0 drivers/media/usb/pvrusb2/pvrusb2-context.c:167
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: 48 8b 85 30 ff ff ff 48 8d b8 98 00 00 00 e8 ee 82 89 fe 45 89
e8 44 89 f1 4c 89 fa 48 89 c6 48 c7 c7 40 c0 ea 86 e8 30 1b dc fc <0f>
ff e9 9b f7 ff ff e8 aa 95 25 fd e9 80 f7 ff ff e8 50 74 f3
---[ end trace 6919030503719da6 ]---

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:19:27 -05:00
Mauro Carvalho Chehab
ad7b57d58d media: mxl111sf: improve error handling logic
As reported by smatch:
	drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c:485 mxl111sf_demod_read_signal_strength() error: uninitialized symbol 'modulation'.

The mxl111sf_demod_read_signal_strength() just ignores if something
gets wrong while reading snr or modulation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:14:44 -05:00
Mauro Carvalho Chehab
021c01d3dc media: dvbsky: shut up a bogus warning
Smatch gives two bogus warnings on this driver:
	drivers/media/usb/dvb-usb-v2/dvbsky.c:336 dvbsky_s960_attach() error: uninitialized symbol 'i2c_adapter'.
	drivers/media/usb/dvb-usb-v2/dvbsky.c:459 dvbsky_s960c_attach() error: uninitialized symbol 'i2c_adapter'.

Shut them up.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:56 -05:00
Matthias Schwarzott
910b0797fa media: em28xx: Fix use-after-free when disconnecting
Fix bug by moving the i2c_unregister_device calls after deregistration
of dvb frontend.

The new style i2c drivers already destroys the frontend object at
i2c_unregister_device time.
When the dvb frontend is unregistered afterwards it leads to this oops:

  [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8
  [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.866644] PGD 0
  [ 6058.866646] P4D 0

  [ 6058.866726] Oops: 0000 [#1] SMP
  [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops]
  [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G        W  O    4.13.9-gentoo #1
  [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014
  [ 6058.867692] Workqueue: usb_hub_wq hub_event
  [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000
  [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293
  [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f
  [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028
  [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f
  [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028
  [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098
  [ 6058.868419] FS:  0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000
  [ 6058.868511] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0
  [ 6058.868662] Call Trace:
  [ 6058.868705]  dvb_unregister_frontend+0x2a/0x80 [dvb_core]
  [ 6058.868774]  em28xx_dvb_fini+0x132/0x220 [em28xx_dvb]
  [ 6058.868840]  em28xx_close_extension+0x34/0x90 [em28xx]
  [ 6058.868902]  em28xx_usb_disconnect+0x4e/0x70 [em28xx]
  [ 6058.868968]  usb_unbind_interface+0x6d/0x260
  [ 6058.869025]  device_release_driver_internal+0x150/0x210
  [ 6058.869094]  device_release_driver+0xd/0x10
  [ 6058.869150]  bus_remove_device+0xe4/0x160
  [ 6058.869204]  device_del+0x1ce/0x2f0
  [ 6058.869253]  usb_disable_device+0x99/0x270
  [ 6058.869306]  usb_disconnect+0x8d/0x260
  [ 6058.869359]  hub_event+0x93d/0x1520
  [ 6058.869408]  ? dequeue_task_fair+0xae5/0xd20
  [ 6058.869467]  process_one_work+0x1d9/0x3e0
  [ 6058.869522]  worker_thread+0x43/0x3e0
  [ 6058.869576]  kthread+0x104/0x140
  [ 6058.869602]  ? trace_event_raw_event_workqueue_work+0x80/0x80
  [ 6058.869640]  ? kthread_create_on_node+0x40/0x40
  [ 6058.869673]  ret_from_fork+0x22/0x30
  [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8
  [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58
  [ 6058.869894] CR2: 00000000000001f8
  [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]---

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:50 -05:00
Malcolm Priestley
7bf7a7116e media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner
When the tuner was split from m88rs2000 the attach function is in wrong
place.

Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.

Prevents driver starting up without any tuner connected.

Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:52:47 -05:00
Malcolm Priestley
3d932ee27e media: dvb-usb-v2: lmedm04: Improve logic checking of warm start
Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.

Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.

Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:51:39 -05:00
Mauro Carvalho Chehab
75d1e3ef9f media: usb: add SPDX identifiers to some code I wrote
As we're now using SPDX identifiers, on several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:41:11 -05:00
Laurent Pinchart
0393e73564 media: uvcvideo: Stream error events carry no data
According to the UVC specification, stream error events carry no data.
Fix a buffer overflow (that should be harmless given data alignment)
when reporting the stream error event by removing the data byte from the
message.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:33:09 -05:00
Baoyou Xie
dfc1648c57 media: uvcvideo: Mark buffer error where overflow
Some cameras post inaccurate frame where next frame data overlap
it. this results in screen flicker, and it need to be prevented.

So this patch marks the buffer error to discard the frame where
buffer overflow.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:32:29 -05:00
Jaejoong Kim
5ba3dff4f3 media: uvcvideo: Remove duplicate & operation
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:32:03 -05:00
Nicolas Dufresne
e96cdc9a0a media: uvcvideo: Add D3DFMT_L8 support
Microsoft HoloLense UVC sensor uses D3DFMT instead of FOURCC when
exposing formats. This adds support for D3DFMT_L8 as exposed from
the Acer Windows Mixed Reality Headset.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:30:07 -05:00
Greg Kroah-Hartman
b627758489 media: usbvision: remove unneeded DRIVER_LICENSE #define
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.

This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Johan Hovold <johan@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:13:44 -05:00
Dan Carpenter
d5ac225c7d media: cpia2: Fix a couple off by one bugs
The cam->buffers[] array has cam->num_frames elements so the > needs to
be changed to >= to avoid going beyond the end of the array.  The
->buffers[] array is allocated in cpia2_allocate_buffers() if you want
to confirm.

Fixes: ab33d5071d ("V4L/DVB (3376): Add cpia2 camera support")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:12:53 -05:00
Arnd Bergmann
cc05c0ba23 media: pulse8-cec: print time using time64_t
The firmware timestamp is an unsigned 32-bit value, but we copy it into
a signed 32-bit variable, so we can theoretically get an overflow in
the calculation when the timestamp is between 2038 and 2106.

This changes the temporary variable to time64_t and changes the deprecated
time_to_tm() over to time64_to_tm() accordingly.

There is still an overflow in y2106, but that is a limitation of the
firmware interface, not a kernel problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:08:22 -05:00
Dean A
e2a067048d media: s2255drv: update firmware load
fixes intermittent soft reboot issue with firmware load
    increases wait time of reset, as required by HW

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:43:59 -05:00
Romain Reignier
fdda01090c media: cx231xx: Add support for The Imaging Source DFG/USB2pro
Note that the inputs for the Composite and S-Video are inverted in
regard to most of the other boards using a cx231xx chip.

Signed-off-by: Romain Reignier <r.reignier@robopec.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
2017-12-08 10:35:08 -05:00
Jérémy Lefaure
e40d14a897 media: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is not always useful to use a variable to store this constant
calculated at compile time.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:11:00 -05:00
Joe Perches
37d5efb019 media: gspca: Convert PDEBUG to gspca_dbg
Use a more typical logging style.

The current macro hides the gspca_dev argument so add it to the
macro uses instead.

Miscellanea:

o Add missing '\n' terminations to formats
o Realign arguments to open parenthesis
o Remove commented out uses of PDEBUG

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:10:15 -05:00
Joe Perches
52173c5f3f media: gspca: Convert PERR to gspca_err
Use a more typical kernel logging style.

The current macro hides the gspca_dev argument so add it to the
macro uses instead.

Miscellanea:

o Add missing '\n' terminations to formats
o Realign arguments to open parenthesis

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:08:50 -05:00
Dan Carpenter
6e298d5847 media: stk-webcam: Fix use after free on disconnect
We free the stk_camera device too early.  It's allocate first in probe
and it should be freed last in stk_camera_disconnect().

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:06:46 -05:00
Arvind Yadav
c0f71bbb81 media: hdpvr: Fix an error handling path in hdpvr_probe()
Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:06:19 -05:00
Colin Ian King
cee32edb23 media: cxusb: pass buf as a const u8 * pointer and make buf static const
Don't populate the read-only u8 array buf on the stack at run time but
instead make it static const; makes object code smaller saving over 480
bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  33030	  65936	    192	  99158	  18356	drivers/media/usb/dvb-usb/cxusb.o

After:
   text	   data	    bss	    dec	    hex	filename
  32446	  66032	    192	  98670	  1816e	drivers/media/usb/dvb-usb/cxusb.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:05:41 -05:00
Laurent Caumont
6d33377f2a media: dvb: i2c transfers over usb cannot be done from stack
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:39:32 -05:00
Mauro Carvalho Chehab
cba862dc73 media: drivers: remove "/**" from non-kernel-doc comments
Several comments are wrongly tagged as kernel-doc, causing
those warnings:

  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
  drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand  *
   on line 652 - I thought it was a doc line
  drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
  drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand  * (reg, val) commad list to initialize this module.
   on line 301 - I thought it was a doc line
  drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
  drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
  drivers/media/i2c/ov5647.c:432: warning: Cannot understand  * @short Subdev core operations registration
   on line 432 - I thought it was a doc line
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
  drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
  drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
  drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand  * @frame_width: width in pixels of the buffer containing the input frame
   on line 150 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand  * @ slice_size: slice size
   on line 356 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand  * @ bitstream_size: bitstream size
   on line 369 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand  * @seq_info:  sequence information buffer
   on line 395 - I thought it was a doc line
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
  drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
  drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
  drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
  drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
  drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
  drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Al Viro
c23e0cb81e media: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27 16:20:06 -05:00
Al Viro
0169943775 annotate poll_table_struct ->_key
Only POLL... bitmaps ever end up there and their only use is checking
for POLL... bits in them.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27 16:19:54 -05:00
Icenowy Zheng
04226916d2 media: usbtv: add a new usbid
A new usbid of UTV007 is found in a newly bought device.

The usbid is 1f71:3301.

The ID on the chip is:
UTV007
A89029.1
1520L18K1

Both video and audio is tested with the modified usbtv driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27 14:49:18 -05:00
Mauro Carvalho Chehab
929b99ed9b media: siano: get rid of documentation warnings
The Siano driver doesn't use kernel-doc markups. While it
would be wanderful to convert to use it, it is probably
not worth the time.

So, instead of solving all problems there, just make
sure that it won't produce dozens of warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27 08:40:36 -05:00
Kees Cook
e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Kees Cook
b9eaf18722 treewide: init_timer() -> setup_timer()
This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:

    init_timer(&t);
    f.function = timer_callback;
    t.data = timer_callback_arg;

to be converted into:

    setup_timer(&t, timer_callback, timer_callback_arg);

The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
 - assignments-before-init_timer() cases
 - limit the .data case removal to the specific struct timer_list instance
 - handling calls by dereference (timer->field vs timer.field)

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/setup_timer.cocci

@fix_address_of@
expression e;
@@

 init_timer(
-&(e)
+&e
 , ...)

// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.

@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@

-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)

@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@

(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );

@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@

-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );
 ... when != func = e2
     when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)

@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
    when != da = e3
-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );

@r1 exists@
expression t;
identifier f;
position p;
@@

f(...) { ... when any
  init_timer@p(\(&t\|t\))
  ... when any
}

@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@

g(...) { ... when any
  \(t.data\|t->data\) = e8
  ... when any
}

// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@

cocci.include_match(False)

@r3@
expression r1.t, func, e7;
position r1.p;
@@

(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:06 -08:00
Linus Torvalds
5d352e69c6 media updates for v4.15-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaC/4EAAoJEAhfPr2O5OEVQnsP/2JNpdLuzgwNp0p2gXrvK5pl
 KOsA6Fld6RNmpuel8eHARbbDTPKF1Y1bvYXVo7lPhXb7KuM2IzG56VxoNech/5pX
 eflKwnpV/Ns/ZMLYue7Rqdw0iZnjWESBWf5lzg9MvzwhZBaPlRwqu/aOJy360AZr
 FnjKHtU/6WUIOCB8r0qLBDR/epoh7y2lKfjDTcEBrURrFEsTajdyd59npdMSIQqO
 iUeeBVEIUKyytYDQNM/VOsBnh0G+2inLuykF8Nd6pYs8O0iUEUpZYwdGuwGUG1HB
 VmCcRGU62efl5nu8zQMPnwAvjXwZAh8vbS0ha+B1vBJh1RwNVUz0kKIKEgAaOMZ3
 zZa3NLfDP4cHgYtr2Xw2vSvJvDwQecmiItJKeZ/Id4cPy03TKEV1KEaHCQJHwbDn
 RP/o9C+5gagMO/oIvZPQ+esVZXQ4prAzOdX53N7HPn4Wn+k4clkI0+hMvMGf67mo
 EYOguCqbN2D0e11BLiPP1bRbGZRSI8I9xcKuhcw4ajJHbRRkrjl8EW7V6c8CuMkd
 0Wj5oidFleJ0Vy+qQOPqXN1FwR7AbHNtI38JfWNz324AIrFCQERpfXVmKwRPZfl4
 YXgGIA9fil3a01YJCtxc0PsXlRkveKJ8hKCLpjXbjNTh1oSbgrDxx5sMx9PO6WqJ
 VOb6fL17rwTXlKV/GeU/
 =d9nT
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation for digital TV (both kAPI and uAPI) are now in sync
   with the implementation (except for legacy/deprecated ioctls). This
   is a major step, as there were always a gap there

 - New sensor driver: imx274

 - New cec driver: cec-gpio

 - New platform driver for rockship rga and tegra CEC

 - New RC driver: tango-ir

 - Several cleanups at atomisp driver

 - Core improvements for RC, CEC, V4L2 async probing support and DVB

 - Lots of drivers cleanup, fixes and improvements.

* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
  dvb_frontend: don't use-after-free the frontend struct
  media: dib0700: fix invalid dvb_detach argument
  media: v4l2-ctrls: Don't validate BITMASK twice
  media: s5p-mfc: fix lockdep warning
  media: dvb-core: always call invoke_release() in fe_free()
  media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
  media: au0828: make const array addr_list static
  media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
  media: drxd: make const array fastIncrDecLUT static
  media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
  media: ddbridge: fix build warnings
  media: av7110: avoid 2038 overflow in debug print
  media: Don't do DMA on stack for firmware upload in the AS102 driver
  media: v4l: async: fix unregister for implicitly registered sub-device notifiers
  media: v4l: async: fix return of unitialized variable ret
  media: imx274: fix missing return assignment from call to imx274_mode_regs
  media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
  media: atomisp: make function calls cleaner
  media: atomisp: get rid of storage_class.h
  media: atomisp: get rid of wrong stddef.h include
  ...
2017-11-15 20:30:12 -08:00
Linus Torvalds
1be2172e96 Modules updates for v4.15
Summary of modules changes for the 4.15 merge window:
 
 - Treewide module_param_call() cleanup, fix up set/get function
   prototype mismatches, from Kees Cook
 
 - Minor code cleanups
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJaDCyzAAoJEMBFfjjOO8FyaYQP/AwHBy6XmwwVlWDP4BqIF6hL
 Vhy3ccVLYEORvePv68tWSRPUz5n6+1Ebqanmwtkw6i8l+KwxY2SfkZql09cARc33
 2iBE4bHF98iWQmnJbF6me80fedY9n5bZJNMQKEF9VozJWwTMOTQFTCfmyJRDBmk9
 iidQj6M3idbSUOYIJjvc40VGx5NyQWSr+FFfqsz1rU5iLGRGEvA3I2/CDT0oTuV6
 D4MmFxzE2Tv/vIMa2GzKJ1LGScuUfSjf93Lq9Kk0cG36qWao8l930CaXyVdE9WJv
 bkUzpf3QYv/rDX6QbAGA0cada13zd+dfBr8YhchclEAfJ+GDLjMEDu04NEmI6KUT
 5lP0Xw0xYNZQI7bkdxDMhsj5jaz/HJpXCjPCtZBnSEKiL4OPXVMe+pBHoCJ2/yFN
 6M716XpWYgUviUOdiE+chczB5p3z4FA6u2ykaM4Tlk0btZuHGxjcSWwvcIdlPmjm
 kY4AfDV6K0bfEBVguWPJicvrkx44atqT5nWbbPhDwTSavtsuRJLb3GCsHedx7K8h
 ZO47lCQFAWCtrycK1HYw+oupNC3hYWQ0SR42XRdGhL1bq26C+1sei1QhfqSgA9PQ
 7CwWH4UTOL9fhtrzSqZngYOh9sjQNFNefqQHcecNzcEjK2vjrgQZvRNWZKHSwaFs
 fbGX8juZWP4ypbK+irTB
 =c8vb
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 4.15 merge window:

   - treewide module_param_call() cleanup, fix up set/get function
     prototype mismatches, from Kees Cook

   - minor code cleanups"

* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Do not paper over type mismatches in module_param_call()
  treewide: Fix function prototypes for module_param_call()
  module: Prepare to convert all module_param_call() prototypes
  kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-15 13:46:33 -08:00
Linus Torvalds
2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Andrey Konovalov
eb0c199422 media: dib0700: fix invalid dvb_detach argument
dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer
to a function. Right now a pointer to state->dib7000p_ops is passed to
dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by
syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead.

------------[ cut here ]------------
kernel BUG at kernel/module.c:1081!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G        W
4.14.0-rc1-42251-gebb2c2437d80 #224
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006a336300 task.stack: ffff88006a7c8000
RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083
RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000
RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190
RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4
R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180
R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000
FS:  0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0
Call Trace:
 stk7070p_frontend_attach+0x515/0x610
drivers/media/usb/dvb-usb/dib0700_devices.c:1013
 dvb_usb_adapter_frontend_init+0x32b/0x660
drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886
 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
 hub_port_connect drivers/usb/core/hub.c:4903
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8
de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f>
0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00
RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210
---[ end trace b75b357739e7e116 ]---

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 05:52:52 -05:00
Gustavo A. R. Silva
b4b138a9d3 media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
Check on return value and goto instruction is redundant as the code
that follows is the goto label err.

Addresses-Coverity-ID: 1268783

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 04:42:27 -05:00
Colin Ian King
213bc75a75 media: au0828: make const array addr_list static
Don't populate array addr_list on the stack but instead make it
static. Makes the object code smaller by over 360 bytes:

Before:
   text    data     bss     dec     hex filename
   8036    1488     192    9716    25f4 au0828-input.o

After:
   text    data     bss     dec     hex filename
   7696    1488     192    9376    24a0 au0828-input.o

(gcc version 7.2.0 x86_64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 04:03:25 -05:00
Colin Ian King
b436e26e48 media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
Trivial fix to spelling mistake in error message text

[mchehab@s-opensource.org: folded all similar patches into one]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 03:47:09 -05:00
Michele Baldessari
b3120d2cc4 media: Don't do DMA on stack for firmware upload in the AS102 driver
Firmware load on AS102 is using the stack which is not allowed any
longer. We currently fail with:

kernel: transfer buffer not dma capable
kernel: ------------[ cut here ]------------
kernel: WARNING: CPU: 0 PID: 598 at drivers/usb/core/hcd.c:1595 usb_hcd_map_urb_for_dma+0x41d/0x620
kernel: Modules linked in: amd64_edac_mod(-) edac_mce_amd as102_fe dvb_as102(+) kvm_amd kvm snd_hda_codec_realtek dvb_core snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec irqbypass crct10dif_pclmul crc32_pclmul snd_hda_core snd_hwdep snd_seq ghash_clmulni_intel sp5100_tco fam15h_power wmi k10temp i2c_piix4 snd_seq_device snd_pcm snd_timer parport_pc parport tpm_infineon snd tpm_tis soundcore tpm_tis_core tpm shpchp acpi_cpufreq xfs libcrc32c amdgpu amdkfd amd_iommu_v2 radeon hid_logitech_hidpp i2c_algo_bit drm_kms_helper crc32c_intel ttm drm r8169 mii hid_logitech_dj
kernel: CPU: 0 PID: 598 Comm: systemd-udevd Not tainted 4.13.10-200.fc26.x86_64 #1
kernel: Hardware name: ASUS All Series/AM1I-A, BIOS 0505 03/13/2014
kernel: task: ffff979933b24c80 task.stack: ffffaf83413a4000
kernel: RIP: 0010:usb_hcd_map_urb_for_dma+0x41d/0x620
systemd-fsck[659]: /dev/sda2: clean, 49/128016 files, 268609/512000 blocks
kernel: RSP: 0018:ffffaf83413a7728 EFLAGS: 00010282
systemd-udevd[604]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
kernel: RAX: 000000000000001f RBX: ffff979930bce780 RCX: 0000000000000000
kernel: RDX: 0000000000000000 RSI: ffff97993ec0e118 RDI: ffff97993ec0e118
kernel: RBP: ffffaf83413a7768 R08: 000000000000039a R09: 0000000000000000
kernel: R10: 0000000000000001 R11: 00000000ffffffff R12: 00000000fffffff5
kernel: R13: 0000000001400000 R14: 0000000000000001 R15: ffff979930806800
kernel: FS:  00007effaca5c8c0(0000) GS:ffff97993ec00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007effa9fca962 CR3: 0000000233089000 CR4: 00000000000406f0
kernel: Call Trace:
kernel:  usb_hcd_submit_urb+0x493/0xb40
kernel:  ? page_cache_tree_insert+0x100/0x100
kernel:  ? xfs_iunlock+0xd5/0x100 [xfs]
kernel:  ? xfs_file_buffered_aio_read+0x57/0xc0 [xfs]
kernel:  usb_submit_urb+0x22d/0x560
kernel:  usb_start_wait_urb+0x6e/0x180
kernel:  usb_bulk_msg+0xb8/0x160
kernel:  as102_send_ep1+0x49/0xe0 [dvb_as102]
kernel:  ? devres_add+0x3f/0x50
kernel:  as102_firmware_upload.isra.0+0x1dc/0x210 [dvb_as102]
kernel:  as102_fw_upload+0xb6/0x1f0 [dvb_as102]
kernel:  as102_dvb_register+0x2af/0x2d0 [dvb_as102]
kernel:  as102_usb_probe+0x1f3/0x260 [dvb_as102]
kernel:  usb_probe_interface+0x124/0x300
kernel:  driver_probe_device+0x2ff/0x450
kernel:  __driver_attach+0xa4/0xe0
kernel:  ? driver_probe_device+0x450/0x450
kernel:  bus_for_each_dev+0x6e/0xb0
kernel:  driver_attach+0x1e/0x20
kernel:  bus_add_driver+0x1c7/0x270
kernel:  driver_register+0x60/0xe0
kernel:  usb_register_driver+0x81/0x150
kernel:  ? 0xffffffffc0807000
kernel:  as102_usb_driver_init+0x1e/0x1000 [dvb_as102]
kernel:  do_one_initcall+0x50/0x190
kernel:  ? __vunmap+0x81/0xb0
kernel:  ? kfree+0x154/0x170
kernel:  ? kmem_cache_alloc_trace+0x15f/0x1c0
kernel:  ? do_init_module+0x27/0x1e9
kernel:  do_init_module+0x5f/0x1e9
kernel:  load_module+0x2602/0x2c30
kernel:  SYSC_init_module+0x170/0x1a0
kernel:  ? SYSC_init_module+0x170/0x1a0
kernel:  SyS_init_module+0xe/0x10
kernel:  do_syscall_64+0x67/0x140
kernel:  entry_SYSCALL64_slow_path+0x25/0x25
kernel: RIP: 0033:0x7effab6cf3ea
kernel: RSP: 002b:00007fff5cfcbbc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
kernel: RAX: ffffffffffffffda RBX: 00005569e0b83760 RCX: 00007effab6cf3ea
kernel: RDX: 00007effac2099c5 RSI: 0000000000009a13 RDI: 00005569e0b98c50
kernel: RBP: 00007effac2099c5 R08: 00005569e0b83ed0 R09: 0000000000001d80
kernel: R10: 00007effab98db00 R11: 0000000000000246 R12: 00005569e0b98c50
kernel: R13: 00005569e0b81c60 R14: 0000000000020000 R15: 00005569dfadfdf7
kernel: Code: 48 39 c8 73 30 80 3d 59 60 9d 00 00 41 bc f5 ff ff ff 0f 85 26 ff ff ff 48 c7 c7 b8 6b d0 92 c6 05 3f 60 9d 00 01 e8 24 3d ad ff <0f> ff 8b 53 64 e9 09 ff ff ff 65 48 8b 0c 25 00 d3 00 00 48 8b
kernel: ---[ end trace c4cae366180e70ec ]---
kernel: as10x_usb: error during firmware upload part1

Let's allocate the the structure dynamically so we can get the firmware
loaded correctly:
[   14.243057] as10x_usb: firmware: as102_data1_st.hex loaded with success
[   14.500777] as10x_usb: firmware: as102_data2_st.hex loaded with success

Signed-off-by: Michele Baldessari <michele@acksyn.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 03:10:39 -05:00
Kees Cook
8da0edf2f9 media: pvrusb2: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Mike Isely <isely@pobox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-By: Mike Isely <isely@pobox.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
2017-11-02 15:50:25 -07:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kees Cook
e4dca7b7aa treewide: Fix function prototypes for module_param_call()
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:

@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@

 module_param_call(_name, _set_func, _get_func, _arg, _mode);

@fix_set_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _set_func(
-_val_type _val
+const char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

@fix_get_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _get_func(
-_val_type _val
+char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:

	drivers/platform/x86/thinkpad_acpi.c
	fs/lockd/svc.c

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-31 15:30:37 +01:00
Colin Ian King
a10444cc04 media: gspca: remove redundant assignment to variable j
Variable j is being set to zero before a loop and also
immediately inside the loop and is not used after the loop.
Hence the first assignment is redundant and can be removed.
Cleans up clang warning:

drivers/media/usb/gspca/gspca.c:1078:2: warning: Value stored
to 'j' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 07:27:37 -04:00
Colin Ian King
d1e2885e1e media: mxl111sf: remove redundant assignment to index
Variable index is set to zero and then set to zero again
a few lines later in a for loop initialization. Remove the
redundant setting of index to zero. Cleans up the clang
warning:

drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c:519:3: warning: Value
stored to 'index' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 07:27:14 -04:00
Adam Sampson
b3168c87c0 media: usbtv: fix brightness and contrast controls
Because the brightness and contrast controls share a register,
usbtv_s_ctrl needs to read the existing values for both controls before
inserting the new value. However, the code accidentally wrote to the
registers (from an uninitialised stack array), rather than reading them.

The user-visible effect of this was that adjusting the brightness would
also set the contrast to a random value, and vice versa -- so it wasn't
possible to correctly adjust the brightness of usbtv's video output.

Tested with an "EasyDAY" UTV007 device.

Fixes: c53a846c48 ("usbtv: add video controls")

Signed-off-by: Adam Sampson <ats@offog.org>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 07:26:10 -04:00
Kees Cook
74ee047751 media: s2255: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Mike Isely <isely@pobox.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 07:25:36 -04:00
Jaejoong Kim
6981d6e55c media: usb: usbtv: remove duplicate & operation
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 07:23:03 -04:00
Bhumika Goyal
0dd7054129 media: cx231xx: make cx231xx_vbi_qops const
Make this const as it is only passed to the const argument of the
function videobuf_queue_vmalloc_init in the file referencing it.
Also, make the declaration in the header const.

Structure found using Coccienlle and changes done by hand.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:37:49 -04:00
Oleh Kravchenko
1bfbb88564 media: cx231xx: Fix NTSC/PAL on Astrometa T2hybrid
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:36:19 -04:00
Oleh Kravchenko
9d377dae7f media: cx231xx: Fix NTSC/PAL on Evromedia USB Full Hybrid Full HD
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:36:02 -04:00
Oleh Kravchenko
47f42f3e21 media: rc: mceusb: add support for 1b80:d3b2
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0.
Remote controller supplied with this tuner fully compatible
with RC_MAP_MSI_DIGIVOX_III.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:34:14 -04:00
Bhumika Goyal
ac71484e89 media: au0828/em28xx: make vb2_ops const
Make vb2_ops const as they are only stored in the const field of a
vb2_queue structure. Make the declarations const too.

Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 14:13:33 +02:00
Markus Elfring
7e11d5027b media: tm6000: cleanup trival coding style issues
- Delete seven error messages for a failed memory allocation
- Adjust seven checks for null pointers
- Use common error handling code in tm6000_usb_probe()
- Adjust jump targets so that the function "kfree" will be always called
  with a non-null pointer.
- Delete an initialisation for the local variable "dev"
  which became unnecessary with this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 14:07:48 +02:00
Mauro Carvalho Chehab
b2c41ca963 media: friio-fe: get rid of set_property()
This callback is not actually doing anything but making it to
return an error depending on the DTV frontend command. Well,
that could break userspace for no good reason, and, if needed,
should be implemented, instead, at set_frontend() callback.

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:49:55 -04:00
Johan Hovold
6c3b047fa2 [media] cx231xx-cards: fix NULL-deref on missing association descriptor
Make sure to check that we actually have an Interface Association
Descriptor before dereferencing it during probe to avoid dereferencing a
NULL-pointer.

Fixes: e0d3bafd02 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: stable <stable@vger.kernel.org>     # 2.6.30
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:03:47 -03:00
Colin Ian King
022565200a [media] gspca: make arrays static, reduces object code size
Don't populate const arrays on the stack, instead make them
static.  Makes the object code smaller by over 5200 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  58259	   8880	    128	  67267	  106c3	ov519.o

After:
   text	   data	    bss	    dec	    hex	filename
  52155	   9776	    128	  62059	   f26b	ov519.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:57:01 -03:00
Sean Young
771f87268e [media] media: vp7045: port TwinhanDTV Alpha to rc-core
Only the nec protocol is understood, but then it doesn't pass on
the full scancode and it ignores the nec repeats its own remote
sends, so holding buttons does not work.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 15:25:13 -03:00
Sean Young
3c03726aaf [media] media: rc: dvb: use dvb device name for rc device
"IR-receiver inside an USB DVB receiver" is not descriptive and we have
a proper name available.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 15:22:55 -03:00
Sean Young
3003812b37 [media] media: dvb: a800: port to rc-core
This receiver only accepts nec16 messages, I've tried many other protocols
and they're all dropped.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 15:19:58 -03:00
Hans Verkuil
561b29e4ec media: fix media Kconfig help syntax issues
The help text should be indented by at least two spaces after the
'help' separator. This is both good practice and the media_build system
for building media drivers makes this assumption.

I went through all Kconfigs under drivers/media and fixed any bad help
sections. This makes it conform to the common practice and should fix
problems with 'make menuconfig' when using media_build. This is due to
a "WARNING" message that media_build can insert in the Kconfig and that
assumes the help text is indented by at least two spaces. If not, then the
Kconfig becomes invalid and 'make menuconfig' fails.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Thomas Kaiser <linux-dvb@kaiser-linux.li>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 14:59:24 -04:00
Colin Ian King
bab4cb30db media: rtl28xxu: make array rc_nec_tab static const
Don't populate the array rc_nec_tab on the stack, instead make it
static const. Makes the object code smaller by over 620 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  49511	  17040	     64	  66615	  10437	rtl28xxu.o

After:
   text	   data	    bss	    dec	    hex	filename
  48825	  17104	     64	  65993	  101c9	rtl28xxu.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:28:28 -04:00
Bhumika Goyal
2b83247f3e media: usb: make i2c_client const
Make these const as they are only used in a copy operation.
Done using Coccinelle.

@match disable optional_qualifier@
identifier s;
@@
static struct i2c_client s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct i2c_client s;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:27:42 -04:00
Markus Elfring
af28c99628 media: drivers: Adjust checks for null pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23 08:20:57 -04:00
Markus Elfring
2d3da59ff1 media: drivers: improve a size determination
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensoure.com: merge similar patches into one]

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23 08:20:57 -04:00
Markus Elfring
c38e8657a4 media: drivers: delete error messages for failed memory allocation
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: fold several similar patches into one]

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:19:55 -04:00
Bhumika Goyal
651ac1290f media: dw2102: make dvb_usb_device_description structures const
dvb_usb_device_description structures are only used during a copy
operation. Therefore, declare them as const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 18:08:55 -04:00
Markus Elfring
1fbfd8c13a media: usbvision: Improve a size determination in usbvision_alloc()
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:48:47 -04:00
Markus Elfring
c4cdcf9f1e media: usbvision: Adjust eight checks for null pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:48:16 -04:00
Markus Elfring
3e7e9755c9 media: usbvision: Delete an error message for a failed memory allocation in usbvision_probe()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:47:57 -04:00
Bhumika Goyal
fe9619a7b5 media: usbtv: make v4l2_file_operations const
Make this const as it is only stored in a const field of a
video_device structure.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:46:05 -04:00
Bhumika Goyal
8684494220 media: usb: make video_device const
Make these const as they are only used during a copy operation.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:45:32 -04:00
Arnd Bergmann
3db4b68e46 media: au0828: fix RC_CORE dependency
When RC_CORE is a loadable module, and au0828 is built-in including
the RC support, we get a link error:

drivers/media/usb/au0828/au0828-input.o: In function `au0828_get_key_au8522':
au0828-input.c:(.text+0x474): undefined reference to `ir_raw_event_store'
drivers/media/usb/au0828/au0828-input.o: In function `au0828_rc_register':
au0828-input.c:(.text+0x7c8): undefined reference to `rc_allocate_device'
au0828-input.c:(.text+0x8f8): undefined reference to `rc_register_device'

This adds an additional dependency, similar to the one for em28xx,
to ensure the broken configuration is never used.

Fixes: 2fcfd317f6 ("[media] au0828: add support for IR on HVR-950Q")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 08:35:35 -04:00
Eugeniu Rosca
87e9201108 media: mxl111sf: Fix potential null pointer dereference
Reviewing the delta between cppcheck output of v4.9.39 and v4.9.40
stable updates, I stumbled on the new warning:

mxl111sf.c:80: (warning) Possible null pointer dereference: rbuf

Since copying state->rcvbuf into rbuf is not needed in the 'write-only'
scenario (i.e. calling mxl111sf_ctrl_msg() from mxl111sf_i2c_send_data()
or from mxl111sf_write_reg()), bypass memcpy() in this case.

Fixes: d90b336f3f ("[media] mxl111sf: Fix driver to use heap allocate buffers for USB messages")

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 06:58:19 -04:00
Gustavo A. R. Silva
9793e1d214 media: au0828: fix unbalanced lock/unlock in au0828_usb_probe
Call mutex_unlock and free dev on failure.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 06:57:33 -04:00