before
[6.418252] brcmfmac: F1 signature read @0x18000000=0x17224356
[6.435663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.551259] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
[6.551275] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x00184000
[6.551352] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed
after
[6.657165] brcmfmac: F1 signature read @0x18000000=0x17224356
[6.660807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.918643] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.918734] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[6.922724] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c
Fixes: adc52bf7ef ("arm64: dts: meson: fix mmc v2 chips max frequencies")
Suggested-by: Art Nikpal <email2tema@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/1582212790-11402-1-git-send-email-christianshewitt@gmail.com
5.6, please pull the following:
- Stefan adds missing Device Tree properties for the Raspberry Pi 3B and
4 LEDs to have proper default configuration
- Nicolas adds an alias for the PCIe root complex node that is looked up
by the Raspberry Pi firmware for patching in specific properties
-----BEGIN PGP SIGNATURE-----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=On3Q
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.6, please pull the following:
- Stefan adds missing Device Tree properties for the Raspberry Pi 3B and
4 LEDs to have proper default configuration
- Nicolas adds an alias for the PCIe root complex node that is looked up
by the Raspberry Pi firmware for patching in specific properties
* tag 'arm-soc/for-5.6/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Add pcie0 alias
ARM: dts: bcm283x: Add missing properties to the PWR LED
Link: https://lore.kernel.org/r/20200228181144.15148-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes contains few code fixes for issues
recently discovered:
- A build fix for ARMv6 only configs when CONFIG_HAVE_ARM_SMCCC is
not set
- A fix for ti-sysc quirk handling for 1-wire hdq reset
And a handful of dts fixes that I had queued up and should
have already sent earlier instead of waiting for the code
fixes to get sorted out:
- Fix naming of vsys_3v3 regulator for dra7-evm
- Fix incorrect OPP node names for am437x-idk-evm
- Fix IPU1 mux clock parent source for dra7
- Add missing PWM property for dra7 timers 13 to 16
- Add missing dma-ranges for dra7 PCIe nodes
- Fix mmc3 max-frequency for dra76x
-----BEGIN PGP SIGNATURE-----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=UHKz
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few fixes for omaps for v5.6-rc cycle
This series of changes contains few code fixes for issues
recently discovered:
- A build fix for ARMv6 only configs when CONFIG_HAVE_ARM_SMCCC is
not set
- A fix for ti-sysc quirk handling for 1-wire hdq reset
And a handful of dts fixes that I had queued up and should
have already sent earlier instead of waiting for the code
fixes to get sorted out:
- Fix naming of vsys_3v3 regulator for dra7-evm
- Fix incorrect OPP node names for am437x-idk-evm
- Fix IPU1 mux clock parent source for dra7
- Add missing PWM property for dra7 timers 13 to 16
- Add missing dma-ranges for dra7 PCIe nodes
- Fix mmc3 max-frequency for dra76x
* tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
arm: dts: dra76x: Fix mmc3 max-frequency
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
bus: ti-sysc: Fix 1-wire reset quirk
ARM: dts: dra7-l4: mark timer13-16 as pwm capable
ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source
ARM: dts: am437x-idk-evm: Fix incorrect OPP node names
ARM: dts: dra7-evm: Rename evm_3v3 regulator to vsys_3v3
Link: https://lore.kernel.org/r/pull-1582903541-589933@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Support for Amlogic Meson SoCs depends on ARCH_MULTI_V7, and thus on
ARCH_MULTIPLATFORM.
As the latter selects COMMON_CLK, there is no need for ARCH_MESON to
select COMMON_CLK.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200121103722.1781-12-geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Some bcm2711 revisions have different DMA constraints on the their PCIE
bus. The lower common denominator, being able to access the lower 3GB of
memory, is the default setting for now. Newer SoC revisions are able to
access the whole memory space.
Raspberry Pi 4's firmware is aware of this limitation and will correct
the PCIE's dma-ranges property if a pcie0 alias is available. So add
it.
Fixes: d5c8dc0d4c ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds the missing properties to the PWR LED for the RPi 3 & 4 boards,
which are already set for the other boards. Without them we will lose
the LED state after suspend.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-----BEGIN PGP SIGNATURE-----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=8Bsc
-----END PGP SIGNATURE-----
Merge tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix AMDTEE memory leak in amdtee_open_session()
* tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits)
tee: amdtee: fix memory leak in amdtee_open_session()
Linux 5.6-rc2
ext4: improve explanation of a mount failure caused by a misconfigured kernel
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
...
Link: https://lore.kernel.org/r/20200227165205.GA7926@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXlY78AAKCRCKwlD9ZEnx
cAR9APdKGcY7roK82m1uLIsCohHOdwikY4qvR+cVniRKgwspAP9Q3NNCXhelEEed
S2JMLficspDnR+BuWR3gyg173Z74CQ==
=P/qq
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas Fixes for v5.6
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
* tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960
Link: https://lore.kernel.org/r/20200226105236.18368-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
On these error paths the "sess" variable isn't freed. It's a refcounted
pointer so we need to call kref_put(). I re-arranged the code a bit so
the error case is always handled before the success case and the error
paths are indented two tabs.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Recent omap changes added runtime checks to use omap_smccc_smc()
when optee is configured in dts. As the omap-secure code can be
built for ARMv6 only without ARMv7 and use custom smc calls, we
now get a build error:
omap-secure.c:(.text+0x94): undefined reference to `__arm_smccc_smc'
As there secure calls are not used for ARMv6, we should not build
secure-common, and not call omap_secure_init() for omap2.
Fixes: c37baa06f8 ("ARM: OMAP2+: Fix undefined reference to omap_secure_init")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dra76x is not affected by i887 which requires mmc3 node to be limited to
a max frequency of 64 MHz. Fix this by overwriting the correct value in
the the dra76 specific dtsi.
Fixes: 895bd4b3e5 ("ARM: dts: Add support for dra76-evm")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Because of the i2c quirk we have the reset quirks named in a confusing
way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using
better naming later on.
Fixes: 4e23be473e ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Build v7_cpu_resume() unconditionally to fix system hang in case that
suspend is disabled but cpuidle support is enabled.
- Drop unexisting Ethernet PHY device from imx8qxp-mek board.
- Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board.
- Fix imx-scu driver to make sure that all messages words are written
sequentially.
- A series from Leonard Crestez to fix i.MX SC API users, having all
messages aligned on 4 bytes.
- Fix eMMC supply for phycore-som board.
- Drop bogus frequency setting from imx7-colibri SD/MMC device, so that
HS200 mode starts working and delivers better performance.
- Fix opp-supported-hw for i.MX7D to get consumer and industrial parts
work with correct frequency settings.
- Restore MDIO compatible to the correct one for LS1021A SoC.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5TuEMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4a+Qf9Enb2G47LTMeYH5JYhm2anDQ4lz+8
Og1bcGPYKilDhc4YzpAIhRnOTLa9TietZSS0tyNFk37GDfKRjn9gxXDRbI+4lrJc
UOSLpWCB4BnzKc+FoCHC37jkdkMD3V2E5MmFHtYkGYmH0DAi8cLmGebmgGujd0GJ
lx2/5EbxKoJxeA2i79H5OAPBhglJsEnPTSulZ+jUdLzJfBlRBIQBc3oPcwnRIibr
VUbLc4Gkb2kTe6NwdQTjqI+4BTHv7/4m+twOojO5Z8QBH4X+3bkLnLiylhuqHBeR
cDXGL7sHkekZhDQ3OwIMiT/5cc8SxplqAl6QMm8+/9gq7KfAucy8Psokow==
=dg69
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.6:
- Build v7_cpu_resume() unconditionally to fix system hang in case that
suspend is disabled but cpuidle support is enabled.
- Drop unexisting Ethernet PHY device from imx8qxp-mek board.
- Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board.
- Fix imx-scu driver to make sure that all messages words are written
sequentially.
- A series from Leonard Crestez to fix i.MX SC API users, having all
messages aligned on 4 bytes.
- Fix eMMC supply for phycore-som board.
- Drop bogus frequency setting from imx7-colibri SD/MMC device, so that
HS200 mode starts working and delivers better performance.
- Fix opp-supported-hw for i.MX7D to get consumer and industrial parts
work with correct frequency settings.
- Restore MDIO compatible to the correct one for LS1021A SoC.
* tag 'imx-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu: Ensure sequential TX
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY
ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties
ARM: dts: ls1021a: Restore MDIO compatible to gianfar
ARM: dts: imx7d: fix opp-supported-hw
ARM: imx: build v7_cpu_resume() unconditionally
ARM: dts: imx6: phycore-som: fix emmc supply
Link: https://lore.kernel.org/r/20200224120334.GH27688@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
There was a bit of an integration glitch with the LED backlight series.
The LED related parts got merged into v5.6-rc1, but the actual backlight
driver got left out.
This caused an issue on at least droid4 where the LCD backlight can not
yet be enabled automatically. And the LCD backlight can no longer be
enabled manually either via sysfs.
The integration glitch happened because some pending comments from me.
There was some confusion on which device tree property we should use for
the default brightness property.
After discussing how to fix this on the mailing lists, we came to the
conclusion that it's best to fix this issue properly by adding the
missing driver.
The other solutions would mean backpedaling and try to come up with some
temporary solution that really does not solve the issue for users. The
patch for led_bl.c has been around for quite a while and tested by many
users and was assumed to be merged as part of the LED backlight series.
For the brightness property to use, we ended up using the more common
"default-brightness-level" rather than "default-brightness" used by
some backlight drivers.
-----BEGIN PGP SIGNATURE-----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=Pox9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.6/droid4-lcd-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix LCD backlight issue for droid4
There was a bit of an integration glitch with the LED backlight series.
The LED related parts got merged into v5.6-rc1, but the actual backlight
driver got left out.
This caused an issue on at least droid4 where the LCD backlight can not
yet be enabled automatically. And the LCD backlight can no longer be
enabled manually either via sysfs.
The integration glitch happened because some pending comments from me.
There was some confusion on which device tree property we should use for
the default brightness property.
After discussing how to fix this on the mailing lists, we came to the
conclusion that it's best to fix this issue properly by adding the
missing driver.
The other solutions would mean backpedaling and try to come up with some
temporary solution that really does not solve the issue for users. The
patch for led_bl.c has been around for quite a while and tested by many
users and was assumed to be merged as part of the LED backlight series.
For the brightness property to use, we ended up using the more common
"default-brightness-level" rather than "default-brightness" used by
some backlight drivers.
* tag 'omap-for-v5.6/droid4-lcd-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: droid4: Configure LED backlight for lm3532
backlight: add led-backlight driver
Link: https://lore.kernel.org/r/pull-1582303901-96693@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix the intel,rcu-gw binding schema for the intel,global-reset
property, fix whitespace in the MAINTAINERS keyword entry, and
add missing CONFIG_HAS_IOMEM dependency to CONFIG_RESET_INTEL_GW
and CONFIG_RESET_BRCMSTB_RESCAL.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXkE6mhgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsAbmAEA92VMz6wV6wGUh+UDVY5pHF22
PhTOLhBymUZue79hSysA/AlXRbUQPGoxvi+aNr9RqYzbGEK5VwawMA9D4MNiSEUJ
=Yxzg
-----END PGP SIGNATURE-----
Merge tag 'reset-fixes-for-v5.6' of git://git.pengutronix.de/git/pza/linux into arm/fixes
Reset controller fixes for v5.6
Fix the intel,rcu-gw binding schema for the intel,global-reset
property, fix whitespace in the MAINTAINERS keyword entry, and
add missing CONFIG_HAS_IOMEM dependency to CONFIG_RESET_INTEL_GW
and CONFIG_RESET_BRCMSTB_RESCAL.
* tag 'reset-fixes-for-v5.6' of git://git.pengutronix.de/git/pza/linux:
reset: intel: add unspecified HAS_IOMEM dependency
reset: brcmstb-rescal: add unspecified HAS_IOMEM dependency
MAINTAINERS: fix style in RESET CONTROLLER FRAMEWORK
dt-bindings: reset: intel,rcu-gw: Fix intel,global-reset schema
Link: https://lore.kernel.org/r/e6eaa409883cbae8d1e818b732b98c3362635712.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
The "renesas,rcar-sata" compatible value was deprecated by
"renesas,sata-r8a7779" many years ago, in commit e67adb4e66
("sata_rcar: Add R-Car Gen2 SATA PHY support"). Drop it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200219153929.11073-1-geert+renesas@glider.be
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: 73feb4d0f8 ("soc: imx-scu: Add SoC UID(unique identifier) support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: d90bf296ae ("firmware: imx: Add support to start/stop a CPU")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: c800cd7824 ("firmware: imx: add SCU power domain driver")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y:
BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0
It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.
Fixes: 15e1f2bc8b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SCU requires that all messages words are written sequentially but linux MU
driver implements multiple independent channels for each register so ordering
between different channels must be ensured by SCU API interface.
Wait for tx_done before every send to ensure that no queueing happens at the
mailbox channel level.
Fixes: edbee095fa ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by:: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DMTimers 13 - 16 are PWM capable and also can be used for CPTS input
signals generation. Hence, mark them as "ti,timer-pwm".
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The IPU1 functional clock is the output of a mux clock (represented
by ipu1_gfclk_mux previously) and the clock source for this has been
updated to be sourced from dpll_core_h22x2_ck in commit 39879c7d96
("ARM: dts: dra7xx-clocks: Source IPU1 functional clock from CORE DPLL").
ipu1_gfclk_mux is an obsolete clock now with the clkctrl conversion,
and this clock source parenting is lost during the new clkctrl layout
conversion.
Remove this stale clock and fix up the clock source for this mux
clock using the latest equivalent clkctrl clock. This restores the
previous logic and ensures that the IPU1 continues to run at the
same frequency of IPU2 and independent of the ABE DPLL.
Fixes: b5f8ffbb6f ("ARM: dts: dra7: convert to use new clkctrl layout")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The commit 337c6c9a69 ("ARM: dts: am437x-idk-evm: Disable
OPP50 for MPU") adjusts couple of OPP nodes defined in the
common am4372.dtsi file, but used outdated node names. This
results in these getting treated as new OPP nodes with missing
properties.
Fix this properly by using the correct node names as updated in
commit b9cb2ba718 ("ARM: dts: Use - instead of @ for DT OPP
entries for TI SoCs").
Reported-by: Roger Quadros <rogerq@ti.com>
Fixes: 337c6c9a69 ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On the new schematics it is renamed and the same name is used on other
dra7 boards.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the LED backlight changes merged, we still need the dts configured
to have backlight working for droid4. Based on an earlier patch from
Pavel Machek <pavel@ucw.cz>, let's configure the backlight but update
the value range to be more usable.
We have a range of 256 register values split into 8 steps, so we can
generate the brightness levels backwards with:
$ for i in 0 1 2 3 4 5 6 7; do echo "255 - ${i} * (256 / 8)" | bc; done
To avoid more confusion why the LCD backlight is still not on, let's
also enable LED backlight as a loadable module for omap2plus_defconfig.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds a led-backlight driver (led_bl), which is similar to
pwm_bl except the driver uses a LED class driver to adjust the
brightness in the HW. Multiple LEDs can be used for a single backlight.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.
Remove the unexisting ethphy1 port.
This fixes a run-time warning:
mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.
Fixes: fdea904e85 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The sram-node compatible properties have mistakingly combined the
model-specific string with the generic "mtd-ram" string.
Note that neither "cy7c1019dv33-10zsxi, mtd-ram" or
"cy7c1019dv33-10zsxi" are used by any in-kernel driver and they are
not present in any binding.
The physmap driver will however bind to platform devices that specify
"mtd-ram".
Fixes: fc48e76489 ("ARM: dts: imx6: Add support for Toradex Colibri iMX6 module")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB driver,
which is something I wanted from the beginning for it. It would be
nice for the people doing IPMB to get this in.
-corey
-----BEGIN PGP SIGNATURE-----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=y+e9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Minor bug fixes for IPMI
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB
driver, which is something I wanted from the beginning for it"
* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
ipmi:ssif: Handle a possible NULL pointer reference
drivers: ipmi: Modify max length of IPMB packet
drivers: ipmi: Support raw i2c packet in IPMB
KVM documentation to rst format, which was very welcome.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRYe2AAoJEL/70l94x66DSdsH/31rMoISGbPReQNKDZtondwr
UNLYHBLau46OR5JiLaKDqRODi12CXwrB6KZyRtQg+PeU/aCaFqW09kDOtMdV4AMl
2bEl4VfUuClsGXBQL5WWsb+adaWxHBtRFPcaT0xMAE+JXxAvt2o7rstOydM4yB9f
vM9TqEP+oVGyqx0FsuCND+zu/qZqNOOqJ1eZCrzqZKwFS8lrjsYtBG4K8rfnvXnI
uGxFnbmZuJKpXpRgCebDdB98m0KEWfAs0S8aOO4NRfmymUBcjMeIeqQz0Mnt17xJ
Fz0KktwdGL28qJ+fnE51i/IBqCoBJL2BmIesSiGKVr1alpHA1ngKvUmcbtHkAXw=
=To92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework is
following which cleans up that mess properly.
-----BEGIN PGP SIGNATURE-----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=UTcs
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for use-after-free and memory leaking in the EDAC core, by
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework
is following which cleans up that mess properly"
* tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sysfs: Remove csrow objects on errors
EDAC/mc: Fix use-after-free and memleaks during device removal
-----BEGIN PGP SIGNATURE-----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=jy10
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
-----BEGIN PGP SIGNATURE-----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=i1Ct
-----END PGP SIGNATURE-----
Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two races fixed, memory leak fix, sysfs directory fixup and two new
log messages:
- two fixed race conditions: extent map merging and truncate vs
fiemap
- create the right sysfs directory with device information and move
the individual device dirs under it
- print messages when the tree-log is replayed at mount time or
cannot be replayed on remount"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs, move device id directories to UUID/devinfo
btrfs: sysfs, add UUID/devinfo kobject
Btrfs: fix race between shrinking truncate and fiemap
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
btrfs: ref-verify: fix memory leaks
-----BEGIN PGP SIGNATURE-----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=IQBE
-----END PGP SIGNATURE-----
Merge tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"
* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
cifs: Fix mode output in debugging statements
cifs: fix mount option display for sec=krb5i
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl5IrGgACgkQ8vlZVpUN
gaMi2Qf+NuXFQ6xpxjw90ZmkOXbsqbFVAIx3yjzW5WKIVyHrhG19P8NuNaCbUajP
WEUzrY/LMmcODd46zKcCR61jOygKCJ5NXyF8qTEFltiMuqugvwmTv49ofRxX+Zlf
YkavQGo+cPs5p1xzo+bKqhA29zhc4PApd3bGpjgUqDlfQxBmm2vNpkbXKj/Bk6CL
k9c1EodygpTO45Kb3Y/JvPcbTLOOu0hPnrCemtb1Vc9tm0j6I+g5RtQofUag+1BX
FOR5Z2EUwByb7F+TTxO1Jse0oFjcxH9J/VqeKi2Fbzucdq3NrRypiFj0XPFBRPFn
g7ONbaoIGiK+02pCNFuwbY0WmLQVfg==
=T3j1
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes (all stable fodder)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve explanation of a mount failure caused by a misconfigured kernel
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
ext4: add cond_resched() to ext4_protect_reserved_inode
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: simplify checking quota limits in ext4_statfs()
ext4: don't assume that mmp_nodename/bdevname have NUL
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
Various crashers and a few regression fixes for things in the 5.6 merge
window:
- Fix three crashers and a memory memory leak for HFI1
- Several bugs found by syzkaller
- A bug fix for the recent QP counters feature on older mlx5 HW
- Locking inversion in cxgb4
- Unnecessary WARN_ON in siw
- A umad crasher regression during unload, from a bug fix for something
else
- Bugs introduced in the merge window
* Missed list_del in uverbs file rework, core and mlx5 devx
* Unexpected integer math truncation in the mlx5 VAR patches
* Compilation bug fix for the VAR patches on 32 bit
-----BEGIN PGP SIGNATURE-----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=CPZw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not too much going on here, though there are about four fixes related
to stuff merged during the last merge window.
We also see the return of a syzkaller instance with access to RDMA
devices, and a few bugs detected by that squished.
- Fix three crashers and a memory memory leak for HFI1
- Several bugs found by syzkaller
- A bug fix for the recent QP counters feature on older mlx5 HW
- Locking inversion in cxgb4
- Unnecessary WARN_ON in siw
- A umad crasher regression during unload, from a bug fix for
something else
- Bugs introduced in the merge window:
- Missed list_del in uverbs file rework, core and mlx5 devx
- Unexpected integer math truncation in the mlx5 VAR patches
- Compilation bug fix for the VAR patches on 32 bit"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
RDMA/core: Fix protection fault in get_pkey_idx_qp_list
RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq
RDMA/mlx5: Prevent overflow in mmap offset calculations
IB/umad: Fix kernel crash while unloading ib_umad
RDMA/mlx5: Fix async events cleanup flows
RDMA/core: Add missing list deletion on freeing event queue
RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
RDMA/iw_cxgb4: initiate CLOSE when entering TERM
IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported
RDMA/core: Fix invalid memory access in spec_filter_size
IB/rdmavt: Reset all QPs when the device is shut down
IB/hfi1: Close window for pq and request coliding
IB/hfi1: Acquire lock to release TID entries when user file is closed
RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create
A handful of fixes that have come in since the merge window:
- Fix of PCI interrupt map on arm64 fast model (SW emulator)
- Fixlet for sound on ST platforms and a small cleanup of deprecated DT properties
- A stack buffer overflow fix for moxtet
- Fuse driver build fix for Tegra194
- A few config updates to turn on new drivers merged this cycle
-----BEGIN PGP SIGNATURE-----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=SYTs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes that have come in since the merge window:
- Fix of PCI interrupt map on arm64 fast model (SW emulator)
- Fixlet for sound on ST platforms and a small cleanup of deprecated
DT properties
- A stack buffer overflow fix for moxtet
- Fuse driver build fix for Tegra194
- A few config updates to turn on new drivers merged this cycle"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: moxtet: fix potential stack buffer overflow
soc/tegra: fuse: Fix build with Tegra194 configuration
ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi
ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260
arm64: defconfig: Enable DRM_SUN6I_DSI
arm64: defconfig: Enable CONFIG_SUN8I_THERMAL
ARM: sunxi: Enable CONFIG_SUN8I_THERMAL
arm64: defconfig: Set bcm2835-dma as built-in
ARM: configs: Cleanup old Kconfig options
ARM: npcm: Bring back GPIOLIB support
arm64: dts: fast models: Fix FVP PCI interrupt-map property
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl5H4GUACgkQjYWKoQLX
FBh57gf+NNw5r1Ec3Y+H7uY4841n2uyW6HReb0qD4iSgPmH3d+WjQViCg9mbUCRh
MW4xfEizp/aTWEC8L8v0u/HHDApvWOHLiDdtWiTybHwHFIHyoE0OMV8V5lVDXP72
2/AefaKejfqW2L8K18le6NLr5jTTO3/G0F5PNmqFhdU3zoR/ic0ReKk0gPFZ38HI
NSc2DOu0KLEKhrE7dAPYNab/nqLiC/oAgTQsTCX/3XeImYsiiLC3PPNdNWiiHYf/
NmgIolxlug/ItEacLCfyfdZbX5/1gw1jZlSdUozUno5Hy1Wt5bZ4rAzg0ORojb/l
tB4CDBeIFG/r+HTX7bAONxRrhxa0hw==
=GZ7w
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
crypto/testmgr: enable selftests for paes-s390 ciphers
s390/time: Fix clk type in get_tod_clock
s390/uv: Fix handling of length extensions
s390/qdio: don't allocate *aob array with GFP_ATOMIC
s390/qdio: simplify ACK tracking
s390/zcrypt: fix card and queue total counter wrap
s390/pkey: fix missing length of protected key on return
vfio-ccw: Use the correct style for SPDX License Identifier
Fix compatible string typos in the xdpe12284 driver, and a wrong
bit value in the ltc2978 driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl5ILnQACgkQyx8mb86f
mYFqIQ//TB+Mu01JsI7buqlpkSlXcaEABiyL0a3Hku4sYKYBjYNQ6dXn+wihmypr
2ELGjs0EOx8V1RLZ2PcEKl95/8UV5cMmSX0FSfZRj29fcBighrJVJprkPQLA8SF5
9at4M2UpwWrPl/l0PLsQLB8Ed7QkGPZfCuiy5zitk6lUhchh7kJ2hG6fYfTs4RGu
rU4bEciQFAuUmd+Tfmp/YBCX+ymLKzkMh1727HSmyAOCfolXDnickVoJGyE1nKRK
yQOdXC3a+28QuQJaJcbh+99M9oYTSzTNnSKq9djcHUaU3Z+bVuBOlgqt5qf80K/E
JhIKH6MQJCDG9+8CHCz8yCIjfm8kqN/pmUKSwcgvofGLQo1ti3VWTrgCh/T8lQpl
kXV1ZVwaNRnU5zZgS/zUUt07arlbIZSe/EoBaVxAWxmYf7HVjQcucdTR4KNFIN0h
jjgKAiyW05bmMJjgI4TV4xDYndMyrwegQIY/hhhNG6LuDoC0sMiUJEsk8XM0ZUy3
nHVh0bKsfGZ7ncixqIK8Szsf54jj5IQ3pnZPNrV9tTml7gz2n0uozGgBA2XaPdWv
aLTu3AQtg7eHiPOFIrQtNPUp6RDh2em6XpVarsA5/ecmJihMVWj7/io9O76SPXPc
HGynqxNUyspMtjntmiffhOEasPk/5EeLlt6UsbB4eYuseSLRyqQ=
=q2M0
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix compatible string typos in the xdpe12284 driver, and a wrong bit
value in the ltc2978 driver"
* tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/xdpe12284) fix typo in compatible strings
hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
Pull perf fixes from Ingo Molnar:
"Fixes and HW enablement patches:
- Tooling fixes, most of which are tooling header synchronization
with v5.6 changes
- Fix kprobes fallout on ARM
- Add Intel Elkhart Lake support and extend Tremont support, these
are relatively simple and should only affect those models
- Fix the AMD family 17h generic event table"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers x86: Sync disabled-features.h
tools include UAPI: Sync sound/asound.h copy
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf tools: Add arm64 version of get_cpuid()
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers uapi: Sync linux/fscrypt.h with the kernel sources
tools headers UAPI: Sync sched.h with the kernel
perf trace: Resolve prctl's 'option' arg strings to numbers
perf beauty prctl: Export the 'options' strarray
tools headers UAPI: Sync prctl.h with the kernel sources
tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
perf maps: Move kmap::kmaps setup to maps__insert()
perf maps: Fix map__clone() for struct kmap
perf maps: Mark ksymbol DSOs with kernel type
perf maps: Mark module DSOs with kernel type
tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
...
