gvt-next-2016-10-27
- Resolve current left build issue with ACPI=n and 32bit kernel
- TLB workaround from Arkadiusz
- vGPU reset fix from Ping
- workload scheduler nesting sleep fix from Changbin
- more misc fixes for sparse warnings and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We cannot use blocking method mutex_lock inside a wait loop.
Here we invoke pick_next_workload() which needs acquire a
mutex in our "condition" experssion. Then we go into a another
of the going-to-sleep sequence and changing the task state.
This is a dangerous. Let's rewrite the wait sequence to avoid
nested sleeping.
v2: fix do...while loop exit condition (zhenyu)
v3: rebase to gvt-staging branch
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.
v2: populate error to top of mmio emulation logic, comments from
zhenyu
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently, for display there is only one DMC image for KBL.
Remove the stepping_info table for KBL and use the no_stepping_info
array for loading the firmware.
v2: Removed the block of code as pointed out by Rodrigo to make the
loads as generic as possible.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477355301-7035-1-git-send-email-anusha.srivatsa@intel.com
Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.
With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Comment mentioned use of intel_uncore_forcewake_irq{unlock, lock}
functions which are nonexistent (and never were).
The description was also incomplete and could cause confusion. Updated
comment is more elaborate on usage and caveats.
v2: mention __locked variant of intel_uncore_forcewake_{get,put} instead
of plain ones
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilsono.c.uk>
[Mika: removed two superfluous lines on comment noted by Chris]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477399682-3133-1-git-send-email-arkadiusz.hiler@intel.com
On my APL the LSPCON firmware resumes in PCON mode as opposed to the
expected LS mode. It also appears to be in a state where AUX DPCD reads
will succeed but return garbage recovering only after a few hundreds of
milliseconds. After the recovery time DPCD reads will result in the
correct values and things will continue to work. If I2C over AUX is
attempted during this recovery time (implying an AUX write transaction)
the firmware won't recover and will stay in this broken state.
As a workaround check if the firmware is in PCON state after resume and
if so wait until the correct DPCD values are returned. For this we
compare the branch descriptor with the one we cached during init time.
If the firmware was in the LS state, we skip the w/a and continue as
before.
v2:
- Use the DP descriptor value cached in intel_dp. (Jani)
- Get to intel_dp using container_of(), instead of a cached ptr.
(Shashank)
- Use usleep_range() instead of msleep().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-9-git-send-email-imre.deak@intel.com
We can use the container_of() magic to get to the DDC adapter, so no
need for caching a pointer to it. We'll also need to get at the intel_dp
ptr in the following patch, so add a helper that can be used for both
purposes.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-8-git-send-email-imre.deak@intel.com
As for external DP sink and branch devices read and print the DP
descriptor for eDP and LSPCON devices as well to aid debugging.
v2:
- Split out this change to a separate patch. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-7-git-send-email-imre.deak@intel.com
All types of DP devices (eDP, DP sink, DP branch) will fail their probe
if the start of DPCD can't be read. The LSPCON PCON functionality also
depends on accessing this area, so fail the probe if the read fails.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-6-git-send-email-imre.deak@intel.com
Extend the branch/sink descriptor info with the missing device ID
field. While at it also read out all the descriptor registers in one
transfer and make the debug print more compact.
v2: (Jani)
- Cache the descriptor in intel_dp.
- Split out this change into a separate patch.
v3: (Jani)
- Fix return value check of __intel_dp_read_desc().
- Use %pE instead of %s to print the device ID.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477401159-15098-1-git-send-email-imre.deak@intel.com
There are two separate sets of DPCD registers for the DP OUI - as well as
for the device ID and HW/SW revision - based on whether the given DP
device is a branch or a sink. Currently we print both branch and sink
OUIs, for consistency print only the one that corresponds to the
probed device.
v2:
- Split out this change into a separate patch. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-4-git-send-email-imre.deak@intel.com
Performing DPCD AUX reads based on debug settings may introduce obscure
bugs in other places that depend on the read being done (or being not
done). To reduce the uncertainty perform the reads unconditionally.
Cc: Mika Kahola <mika.kahola@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-3-git-send-email-imre.deak@intel.com
This check is open-coded in a few places, so it makes sense to simplify
things by having a helper for it similar to the rest of DPCD feature
helpers.
v2: (Jani)
- Move the helper to drm_dp_helper.h.
- Split out this change to a separate patch.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com
When modeset occurs and the LS_CLK is set to some special values in DP
mode, the N/M need to be set manually if audio is playing. Otherwise the
first several seconds may be silent in audio playback.
The relationship of Maud and Naud is expressed in the following
equation:
Maud/Naud = 512 * fs / f_LS_Clk
Please refer VESA DisplayPort Standard spec for details.
v2 by Jani:
- organize Maud/Naud table according to DP 1.4 spec
- add 64k and 128k audio rates
- update HSW_AUD_M_CTS_ENABLE register when Maud not found
- remove extra checks for port clock
- simplify Maud/Naud lookup
- reset patch author back to Libin
Cc: "Zhang, Keqiao" <keqiao.zhang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-3-git-send-email-jani.nikula@intel.com
The array contains the crtc clock, rely on that. While at it, debug log
the HDMI N value or automatic mode.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-2-git-send-email-jani.nikula@intel.com
Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.
This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 27d4efc559 ("drm/i915: Move long hpd handling into the hotplug work")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.
v2: Commit message update. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c433 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
We do not need to set up a fence for the rotated view.
Display does not need it and no one can access it.
v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098d ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The current_vgpu will set to NULL after stopping the scheduler when
the reset is triggered by current vgpu, so here need change the
judgement condition for current vgpu detection.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The emulation handler for MMIO GDRST miss vreg write in it, as result
the vreg cannot update correspondingly.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Like other routines, intel_gvt_hypervisor_detect_host returns 0
for success.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are
pinned in mappable aperture portion of GGTT and for ringbuffer pages
allocated from Stolen memory, access can only be done through GMADR BAR.
In case of GuC based submission, updates done in ringbuffer via GMADR
may not get committed to memory by the time the Command streamer starts
reading them, resulting in fetching of stale data.
For Host based submission, such problem is not there as the write to Ring
Tail or ELSP register happens from the Host side prior to submission.
Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already
enforces the ordering between outstanding GMADR writes & new GTTMADR access.
MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to
registers within GT is contained within GT, so ordering is not enforced
resulting in a race, which can manifest in form of a hang.
To ensure the flush of in-flight GMADR writes, a POSTING READ is done to
GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(),
which takes care of GMADR writes from User space to GEM buffers, but not the
ringbuffer writes from KMD.
This WA is needed on all recent HW.
v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie
in any forcewake domain range and so the overhead of spinlock & search
in the forcewake table is avoidable. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413323-1880-1-git-send-email-akash.goel@intel.com
As well as knowing when the error occurred, it is more interesting to me
to know how long after booting the error occurred, and for good measure
record the time since last hw initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161025121602.1457-1-chris@chris-wilson.co.uk
The GuC log buffer flush work item has to do a register access to send the
ack to GuC and this work item, if not synced before suspend, can potentially
get executed after the GFX device is suspended. This work item function uses
rpm get/put calls around the Hw access, which covers the rpm suspend case
but for system suspend a sync would be required as kernel can potentially
schedule the work items even after some devices, including GFX, have been
put to suspend. But sync has to be done only for the system suspend case,
as sync along with rpm get/put can cause a deadlock for rpm suspend path.
To have the sync, but like a NOOP, for rpm suspend path also this work
item could have been queued from the irq handler only when the device is
runtime active & kept active while that work item is pending or getting
executed but an interrupt can come even after the device is out of use and
so can potentially lead to missing of this work item.
By marking the workqueue, dedicated for handling GuC log buffer flush
interrupts, as freezable we don't have to bother about flushing of this
work item from the suspend hooks, the pending work item if any will be
either executed before the suspend or scheduled later on resume. This way
the handling of log buffer flush work item can be kept same between system
suspend & rpm suspend.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As per the current i915 Driver load sequence, debugfs registration is done
at the end and so the relay channel debugfs file is also created after that
but the GuC firmware is loaded much earlier in the sequence.
As a result Driver could miss capturing the boot-time logs of GuC firmware
if there are flush interrupts from the GuC side.
Relay has a provision to support early logging where initially only relay
channel can be created, to have buffers for storing logs, and later on
channel can be associated with a debugfs file at appropriate time.
Have availed that, which allows Driver to capture boot time logs also,
which can be collected once Userspace comes up.
v2:
- Remove the couple of FIXMEs, as now the relay channel will be created
early before enabling the flush interrupts, so no possibility of relay
channel pointer being modified & read at the same time from 2 different
execution contexts.
- Rebase.
v3:
- Add a comment to justiy setting 'is_global' before the NULL check on the
parent directory dentry pointer.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
To ensure that we always get the up-to-date data from log buffer, its
better to access the buffer through an uncached CPU mapping. Also the way
buffer is accessed from GuC & Host side, manually doing cache flush may
not be effective always if cached CPU mapping is used. In order to avoid
any performance drop & have fast reads from the GuC log buffer, used SSE4.1
movntdqa based memcpy function i915_memcpy_from_wc, as copying using
movntqda from WC type memory is almost as fast as reading from WB memory.
This way log buffer sampling time will not get increased and so would be
able to deal with the flush interrupt storm when GuC is generating logs at
a very high rate.
Ideally SSE 4.1 should be present on all chipsets supporting GuC based
submisssions, but if not then logging will not be enabled.
v2: Rebase.
v3: Squash the WC type vmalloc mapping patch with this patch. (Chris)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch provides debugfs interface i915_guc_output_control for
on the fly enabling/disabling of logging in GuC firmware and controlling
the verbosity level of logs.
The value written to the file, should have bit 0 set to enable logging and
bits 4-7 should contain the verbosity info.
v2: Add a forceful flush, to collect left over logs, on disabling logging.
Useful for Validation.
v3: Besides minor cleanup, implement read method for the debugfs file and
set the guc_log_level to -1 when logging is disabled. (Tvrtko)
v4: Minor cleanup & rebase. (Tvrtko)
v5:
- Lock struct_mutex after the NULL check for guc log buffer vma. (Chris)
- Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends a flush interrupt to Host when the log buffer is half
full and at that time only it updates the log buffer state.
But in certain cases, as described below, it could be useful to have all
that even when log buffer is only partially full. For that there is a force
log buffer flush Host2GuC action supported by GuC firmware.
For Validation requirements, a forceful flush is needed to collect the
left over logs on disabling logging. The same can be done before proceeding
with GPU/GuC reset as there could be some data in log buffer which is yet
to be captured and those logs would be particularly useful to understand
that why the reset was initiated.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Added the dump of GuC log buffer to i915 error state, as the contents of
GuC log buffer would also be useful to determine that why the GPU reset
was triggered.
v2:
- For uniformity use existing helper function print_error_obj() to
dump out contents of GuC log buffer, pretty printing is better left
to userspace. (Chris)
- Skip the dumping of GuC log buffer when logging is disabled as it
won't be of any use.
- Rebase.
v3: Rebase.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In cases where GuC generate logs at a very high rate, correspondingly
the rate of flush interrupts is also very high.
So far total 8 pages were allocated for storing both ISR & DPC logs.
As per the half-full draining protocol followed by GuC, by doubling
the number of pages, the frequency of flush interrupts can be cut down
to almost half, which then helps in reducing the logging overhead.
So now allocating 8 pages apiece for ISR & DPC logs.
This also helps in reducing the output log file size, apart from
reducing the flush interrupt count. With the original settings,
44 KB was needed for one snapshot. With modified settings, 76 KB is
needed for a snapshot which will be equivalent to 2 snapshots of the
original setting. So 12KB saving, every 88 KB, over the original setting.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends an interrupt to flush the log buffer when it becomes
half full, so Driver doesn't really need to sample the complete buffer
and can just copy only the newly written data by GuC into the local
buffer, i.e. as per the read & write pointer values.
Moreover the flush interrupt would generally come for one type of log
buffer, when it becomes half full, so at that time the other 2 types of
log buffer would comparatively have much lesser unread data in them.
In case of overflow reported by GuC, Driver do need to copy the entire
buffer as the whole buffer would contain the unread data.
v2: Rebase.
v3: Fix the blooper of doing the copy twice. (Tvrtko)
v4: Add curlies for 'else' case also, matching the 'if'. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends an interrupt to flush the log buffer when it
becomes half full. GuC firmware also tracks how many times the
buffer overflowed.
It would be useful to maintain a statistics of how many flush
interrupts were received and for which type of log buffer,
along with the overflow count of each buffer type.
Augmented i915_log_info debugfs to report back these statistics.
v2:
- Update the logic to detect multiple overflows between the 2
flush interrupts and also log a message for overflow (Tvrtko)
- Track the number of times there was no free sub buffer to capture
the GuC log buffer. (Tvrtko)
v3:
- Fix the printf field width for overflow counter, set it to 10 as per the
max value of u32, which takes 10 digits in decimal form. (Tvrtko)
v4:
- Move the log buffer overflow handling to a new function for better
readability. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
With the addition of new Host2GuC actions related to GuC logging, there
is a need of a lock to serialize them, as they can execute concurrently
with each other and also with other existing actions.
v2: Use mutex in place of spinlock to serialize, as sleep can happen
while waiting for the action's response from GuC. (Tvrtko)
v3: To conform to the general rules, acquire mutex before taking the
forcewake. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.
v2: Defer the creation of relay channel & associated debugfs file, as
debugfs setup is now done at the end of i915 Driver load. (Chris)
v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.
v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
sufficient buffering for boot time logs
v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
associated with the debugfs file. (Tvrtko)
v6:
- Move the write to 'is_global' after the NULL check on parent directory
dentry pointer. (Tvrtko)
v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)
Testcase: igt/tools/intel_guc_logger
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC ukernel sends an interrupt to Host to flush the log buffer
and expects Host to correspondingly update the read pointer
information in the state structure, once it has consumed the
log buffer contents by copying them to a file or buffer.
Even if Host couldn't copy the contents, it can still update the
read pointer so that logging state is not disturbed on GuC side.
v2:
- Use a dedicated workqueue for handling flush interrupt. (Tvrtko)
- Reduce the overall log buffer copying time by skipping the copy of
crash buffer area for regular cases and copying only the state
structure data in first page.
v3:
- Create a vmalloc mapping of log buffer. (Chris)
- Cover the flush acknowledgment under rpm get & put.(Chris)
- Revert the change of skipping the copy of crash dump area, as
not really needed, will be covered by subsequent patch.
v4:
- Destroy the wq under the same condition in which it was created,
pass dev_piv pointer instead of dev to newly added GuC function,
add more comments & rename variable for clarity. (Tvrtko)
v5:
- Allocate & destroy the dedicated wq, for handling flush interrupt,
from the setup/teardown routines of GuC logging. (Chris)
- Validate the log buffer size value retrieved from state structure
and do some minor cleanup. (Tvrtko)
- Fix error/warnings reported by checkpatch. (Tvrtko)
- Rebase.
v6:
- Remove the interrupts_enabled check from guc_capture_logs_work, need
to process that last work item also, queued just before disabling the
interrupt as log buffer flush interrupt handling is a bit different
case where GuC is actually expecting an ACK from host, which should be
provided to keep the logging going.
Sync against the work will be done by caller disabling the interrupt.
- Don't sample the log buffer size value from state structure, directly
use the expected value to move the pointer & do the copy and that cannot
go wrong (out of bounds) as Driver only allocated the log buffer and the
relay buffers. Driver should refrain from interpreting the log packet,
as much possible and let Userspace parser detect the anomaly. (Chris)
v7:
- Use switch statement instead of 'if else' for retrieving the GuC log
buffer size. (Tvrtko)
- Refactored the log buffer copying function and shortended the name of
couple of variables for better readability. (Tvrtko)
v8:
- Make the dedicated wq as a high priority one to further reduce the
turnaround time of handing log buffer flush event from GuC.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
There are certain types of interrupts which Host can receive from GuC.
GuC ukernel sends an interrupt to Host for certain events, like for
example retrieve/consume the logs generated by ukernel.
This patch adds support to receive interrupts from GuC but currently
enables & partially handles only the interrupt sent by GuC ukernel.
Future patches will add support for handling other interrupt types.
v2:
- Use common low level routines for PM IER/IIR programming (Chris)
- Rename interrupt functions to gen9_xxx from gen8_xxx (Chris)
- Replace disabling of wake ref asserts with rpm get/put (Chris)
v3:
- Update comments for more clarity. (Tvrtko)
- Remove the masking of GuC interrupt, which was kept masked till the
start of bottom half, its not really needed as there is only a
single instance of work item & wq is ordered. (Tvrtko)
v4:
- Rebase.
- Rename guc_events to pm_guc_events so as to be indicative of the
register/control block it is associated with. (Chris)
- Add handling for back to back log buffer flush interrupts.
v5:
- Move the read & clearing of register, containing Guc2Host message
bits, outside the irq spinlock. (Tvrtko)
v6:
- Move the log buffer flush interrupt related stuff to the following
patch so as to do only generic bits in this patch. (Tvrtko)
- Rebase.
v7:
- Remove the interrupts_enabled check from gen9_guc_irq_handler, want to
process that last interrupt also before disabling the interrupt, sync
against the work queued by irq handler will be done by caller disabling
the interrupt.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
So far PM IER/IIR/IMR registers were being used only for Turbo related
interrupts. But interrupts coming from GuC also use the same set.
As a precursor to supporting GuC interrupts, added new low level routines
so as to allow sharing the programming of PM IER/IIR/IMR registers between
Turbo & GuC.
Also similar to PM IMR, maintaining a bitmask for PM IER register, to allow
easy sharing of it between Turbo & GuC without involving a rmw operation.
v2:
- For appropriateness & avoid any ambiguity, rename old functions
enable/disable pm_irq to mask/unmask pm_irq and rename new functions
enable/disable pm_interrupts to enable/disable pm_irq. (Tvrtko)
- Use u32 in place of uint32_t. (Tvrtko)
v3:
- Rename the fields pm_irq_mask & pm_ier_mask and do some cleanup. (Chris)
- Rebase.
v4: Fix the inadvertent disabling of User interrupt for VECS ring causing
failure for certain IGTs.
v5: Use dev_priv with HAS_VEBOX macro. (Tvrtko)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
So far there were 2 fields related to GuC logs in 'intel_guc' structure.
For the support of capturing GuC logs & storing them in a local buffer,
multiple new fields would have to be added. This warrants a separate
structure to contain the fields related to GuC logging state.
Added a new structure 'intel_guc_log' and instance of it inside
'intel_guc' structure.
v2: Rebase.
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The first page of the GuC log buffer contains state info or meta data
which is required to parse the logs contained in the subsequent pages.
The structure representing the state info is added to interface file
as Driver would need to handle log buffer flush interrupts from GuC.
Added an enum for the different message/event types that can be send
by the GuC ukernel to Host.
Also added 2 new Host to GuC action types to inform GuC when Host has
flushed the log buffer and forcefuly cause the GuC to send a new
log buffer flush interrupt.
v2:
- Make documentation of log buffer state structure more elaborate &
rename LOGBUFFERFLUSH action to LOG_BUFFER_FLUSH for consistency.(Tvrtko)
v3: Add GuC log buffer layout diagram for more clarity.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC Log buffer allocation was tied up with verbosity level module param
i915.guc_log_level. User would be given a provision to enable firmware
logging at runtime, through a host2guc action, and not necessarily during
Driver load time. But the address of log buffer can be passed only in
init params, at firmware load time, so GuC has to be reset and firmware
needs to be reloaded to pass the log buffer address at runtime.
To avoid reset of GuC & reload of firmware, allocation of log buffer will
be done always but logging would be enabled initially on GuC side based on
the value of module parameter guc_log_level.
v2: Update commit message to describe the constraint with allocation of
log buffer at runtime. (Tvrtko)
v3: Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Backmerge because Chris Wilson needs the very latest&greates of
Gustavo Padovan's sync_file work, specifically the refcounting changes
from:
commit 30cd85dd6e
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Oct 19 15:48:32 2016 -0200
dma-buf/sync_file: hold reference to fence when creating sync_file
Also good to sync in general since git tends to get confused with the
cherry-picking going on.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
- first slice of the gvt device model (Zhenyu et al)
- compression support for gpu error states (Chris)
- sunset clause on gpu errors resulting in dmesg noise telling users
how to report them
- .rodata diet from Tvrtko
- switch over lots of macros to only take dev_priv (Tvrtko)
- underrun suppression for dp link training (Ville)
- lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish
from Jani
- gen9 wm fixes from Paulo&Lyude
- updated ddi programming for kbl (Rodrigo)
- respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville)
* tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits)
drm/i915: Update DRIVER_DATE to 20161024
drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
drm/i915/dp: add lane_count check in intel_dp_check_link_status
drm/i915: Fix whitespace issues
drm/i915: Clean up DDI DDC/AUX CH sanitation
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/i915: Respect alternate_aux_channel for all DDI ports
drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
drm/i915: KBL - Recommended buffer translation programming for DisplayPort
drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
drm/i915: Add a sunset clause to GPU hang logging
drm/i915: Stop reporting error details in dmesg as well as the error-state
drm/i915/gvt: do not ignore return value of create_scratch_page
drm/i915/gvt: fix spare warnings on odd constant _Bool cast
drm/i915/gvt: mark symbols static where possible
drm/i915/gvt: fix sparse warnings on different address spaces
drm/i915/gvt: properly access enabled intel_engine_cs
drm/i915/gvt: Remove defunct vmap_batch()
drm/i915/gvt: Use common mapping routines for shadow_bb object
drm/i915/gvt: Use common mapping routines for indirect_ctx object
...
First -misc pull for 4.10:
- drm_format rework from Laurent
- reservation patches from Chris that missed 4.9.
- aspect ratio support in infoframe helpers and drm mode/edid code
(Shashank Sharma)
- rotation rework from Ville (first parts at least)
- another attempt at the CRC debugfs interface from Tomeu
- piles and piles of misc patches all over
* tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits)
drm: Use u64 for intermediate dotclock calculations
drm/i915: Use the per-plane rotation property
drm/omap: Use per-plane rotation property
drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0
drm/atmel-hlcdc: Use per-plane rotation property
drm/arm: Use per-plane rotation property
drm: Add support for optional per-plane rotation property
drm/atomic: Reject attempts to use multiple rotation angles at once
drm: Add drm_rotation_90_or_270()
dma-buf/sync_file: hold reference to fence when creating sync_file
drm/virtio: kconfig: Fixup white space.
drm/fence: release fence reference when canceling event
drm/i915: Handle early failure during intel_get_load_detect_pipe
drm/fb_cma_helper: do not free fbdev if there is none
drm: fix sparse warnings on undeclared symbols in crc debugfs
gpu: Remove depends on RESET_CONTROLLER when not a provider
i915: don't call drm_atomic_state_put on invalid pointer
drm: Don't export the drm_fb_get_bpp_depth() function
drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info()
...
Linux PCI driver saves the msi and msix capability offset
in pci_dev->msi_cap and pci_dev->msix_cap. We can use msi_cap
in pci_dev directly, no need hardcode.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Macro set_mask_bits() is ready for us, just invoke it and remove
our write_bits().
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It is better to use %p format for void pointers instead of casting them
because a void* is not necessary a 64 bits value.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
