Introduce the API required to make sure that the devices that use
the QMan portal are unbound when the portal is unbound.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure all the frames that are in flight have time to be processed
before the interface is completely brought down. Add a missing delay
for the Rx path.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User reports that an application making an (incorrect) call to
restart AN on a fixed link DPAA interface triggers an error in
the kernel log while the returned EINVAL should be enough.
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to this change, the frames dropped on receive or transmit
were not displayed in the ethtool statistics, leaving the dropped
frames unaccounted for.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a page to store the scatter gather table on the transmit path.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of reading skb fields, use information from the DPAA frame
descriptor.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dpaa_cleanup_tx_fd() function is called by the frame transmit
confirmation callback but also on several error paths. This function
is reading the transmit timestamp value. Avoid reading an invalid
timestamp value on the error paths.
Fixes: 4664856e9c ("dpaa_eth: add support for hardware timestamping")
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA unmapping is required before accessing the HW provided timestamping
information.
Fixes: 4664856e9c ("dpaa_eth: add support for hardware timestamping")
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the buffers used for reception from netdev_frags to pages.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the DPAA Ethernet driver is using three buffer pools
for each interface, with three different sizes for the buffers
provided for the FMan reception path. This patch reduces the
number of buffer pools to one per interface. This change is in
preparation of another, that will be switching from netdev_frags
to page backed buffers for the receive path.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: add some optimizations and cleanups
This series adds some code optimizations and cleanups for
the HNS3 ethernet driver.
[patch 1/9] dumps some debug information when reset fail.
[patch 2/9] dumps some struct netdev_queue information when
TX timeout.
[patch 3/9] cleanups some magic numbers.
[patch 4/9] cleanups some coding style issue.
[patch 5/9] fixes a compiler warning.
[patch 6/9] optimizes some local variable initialization.
[patch 7/9] modifies some comments.
[patch 8/9] cleanups some print format warnings.
[patch 9/9] cleanups byte order issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Though the hip08 and the IMP(Intelligent Management Processor)
have the same byte order right now, it is better to convert
__be or __le variable into the CPU's byte order before print.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using '%d' for printing type unsigned int or '%u' for
type int would cause static tools to give false warnings,
so this patch cleanups this warning by using the suitable
format specifier of the type of variable.
BTW, modifies the type of some variables and macro to
synchronize with their usage.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS
more correct, and adds comments in some place to make the code more
readable.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable tx_ring is unnecessary to be initialized as it will be set
before used, and the variable rst_cnt is better to be initialized when
declaration for simplification.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits
and the length of netdev's name is IFNAMSIZ, the total length
of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even
though '*_int_idx' will never have such large value, but the
compiler gives a format-truncation warning for this case.
So this patch just enlarges the length to avoid this warning.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To unify code style and make code simpler, this patch modifies
some code, deletes unnecessary blank lines and {}, changes
location of code, and so on.
No functional change.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code more readable, this patch replaces
some magic numbers with macro or sizeof operation.
Also uses macro lower_32_bits and upper_32_bits to
get bits 0-31 and 32-63 of a number, instead of
using type conversion and '>>' operation.
No functional change.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is a TX timeout, we can tell if the driver or stack
has stopped the queue by looking at state field, and when has
the last packet transmited by looking at trans_start field.
So this patch prints these two field in the
hns3_get_tx_timeo_queue_info().
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reset fails, there is some information that will help for
finding out why does reset fail. and removes an unused
core_rst_cnt field in struct hclge_rst_stats.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sheetal Tigadoli says:
====================
bnxt_en: Add OP-TEE based bnxt f/w manager
This patch series adds support for TEE based BNXT firmware
management module and the driver changes to invoke OP-TEE
APIs to fastboot firmware and to collect crash dump.
Changes from v4:
- update Kconfig to reflect dependency on TEE driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver supports 2 types of core dumps.
1. Live dump - Firmware dump when system is up and running.
2. Crash dump - Dump which is collected during firmware crash
that can be retrieved after recovery.
Crash dump is currently supported only on specific 58800 chips
which can be retrieved using OP-TEE API only, as firmware cannot
access this region directly.
User needs to set the dump flag using following command before
initiating the dump collection:
$ ethtool -W|--set-dump eth0 N
Where N is "0" for live dump and "1" for crash dump
Command to collect the dump after setting the flag:
$ ethtool -w eth0 data Filename
v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n.
Also change log message to netdev_info().
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In error recovery process when firmware indicates that it is
completely down, initiate a firmware reset by calling OP-TEE API.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver registers on TEE bus to interact with OP-TEE based
BNXT firmware management modules
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Make port split code more generic
Jiri says:
Currently, we assume some limitations and constant values which are not
applicable for Spectrum-3 which has 8 lanes ports (instead of previous 4
lanes).
This patch does 2 things:
1) Generalizes the code to not use constants so it can work for 4, 8 and
possibly 16 lanes.
2) Enforces some assumptions we had in the code but did not check.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the check generic for any possible value, not only 2 and 4.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During recreation of original unsplit ports, just simply iterate over
the whole gap and recreate whatever originally existed.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code considers only split by 2 or 4. Make the base port
getting generic and allow split by 8 to be handled correctly. Generalize
the used port checks as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using constant value, use port_module_max_width which is
aligned with the cluster size.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't compute the original base local port during unsplit, rather
remember it in mlxsw_sp_port structure during split port creation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in
two split ports each of 4 lanes. Add a resource that can be used to
obtain local port offset in that case.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get local port offsets of split port in a separate helper function and
use it in both split and unsplit function.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver assumes certain values in the PMLP register. Add checks that
verify that PMLP register provides fitting values.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the port mapping structure down to create, module_map and other
function instead of individual values.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use constant max width value and instead of that, use the actual
width of the port. Also don't pass module value and use the value
stored in the same structure.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the initial PMLP register configuration into array of structures
instead of just simple array of module numbers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when user does split, he is not able to distinguish if the
port cannot be split because it is already split, or because it cannot
be split at all. Add another check for split flag to distinguish this.
Also add check forbidding split when maximal width is 1.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that the port cannot be split further should be checked before
checking the count, so move it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the max module width is hard-coded according to ASIC type.
That is not entirely correct, as the max module width might differ
per-board. Use PMTM register to query FW for maximal width of a module.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMTM allows query or configuration of module types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx/rx lane fields got extended to 4 bits, update the reg field
description accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use '__skb_queue_purge()' instead of re-implementing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Control action percpu counters allocation by netlink flag
Currently, significant fraction of CPU time during TC filter allocation
is spent in percpu allocator. Moreover, percpu allocator is protected
with single global mutex which negates any potential to improve its
performance by means of recent developments in TC filter update API that
removed rtnl lock for some Qdiscs and classifiers. In order to
significantly improve filter update rate and reduce memory usage we
would like to allow users to skip percpu counters allocation for
specific action if they don't expect high traffic rate hitting the
action, which is a reasonable expectation for hardware-offloaded setup.
In that case any potential gains to software fast-path performance
gained by usage of percpu-allocated counters compared to regular integer
counters protected by spinlock are not important, but amount of
additional CPU and memory consumed by them is significant.
In order to allow configuring action counters allocation type at
runtime, implement following changes:
- Implement helper functions to update the action counters and use them
in affected actions instead of updating counters directly. This steps
abstracts actions implementation from counter types that are being
used for particular action instance at runtime.
- Modify the new helpers to use percpu counters if they were allocated
during action initialization and use regular counters otherwise.
- Extend action UAPI TCA_ACT space with TCA_ACT_FLAGS field. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS action flag and update
hardware-offloaded actions to not allocate percpu counters when the
flag is set.
With this changes users that prefer action update slow-path speed over
software fast-path speed can dynamically request actions to skip percpu
counters allocation without affecting other users.
Now, lets look at actual performance gains provided by this change.
Simple test is used to measure insertion rate - iproute2 TC is executed
in parallel by xargs in batch mode, its total execution time is measured
by shell builtin "time" command. The command runs 20 concurrent tc
instances, each with its own batch file with 100k rules:
$ time ls add* | xargs -n 1 -P 20 sudo tc -b
Two main rule profiles are tested. First is simple L2 flower classifier
with single gact drop action. The configuration is chosen as worst case
scenario because with single-action rules pressure on percpu allocator
is minimized. Example rule:
filter add dev ens1f0 protocol ip ingress prio 1 handle 1 flower skip_hw
src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 action drop
Second profile is typical real-world scenario that uses flower
classifier with some L2-4 fields and two actions (tunnel_key+mirred).
Example rule:
filter add dev ens1f0_0 protocol ip ingress prio 1 handle 1 flower
skip_hw src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 src_ip
192.168.111.1 dst_ip 192.168.111.2 ip_proto udp dst_port 1 src_port
1 action tunnel_key set id 1 src_ip 2.2.2.2 dst_ip 2.2.2.3 dst_port
4789 action mirred egress redirect dev vxlan1
Profile | percpu | no_percpu | X improvement
| (k rules/sec) | (k rules/sec) |
-------------------+---------------+---------------+---------------
Gact drop | 203 | 259 | 1.28
tunnel_key+mirred | 92 | 204 | 2.22
For simple drop action removing percpu allocation leads to ~25%
insertion rate improvement. Perf profiles highlights the bottlenecks.
Perf profile of run with percpu allocation (gact drop):
+ 89.11% 0.48% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 88.58% 0.04% tc [kernel.vmlinux] [k] do_syscall_64
+ 87.50% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 86.96% 0.04% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 86.85% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 86.60% 0.05% tc [kernel.vmlinux] [k] sock_sendmsg
+ 86.55% 0.12% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 86.04% 0.13% tc [kernel.vmlinux] [k] netlink_unicast
+ 85.42% 0.03% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 84.68% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 84.56% 0.24% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.73% 0.65% tc [cls_flower] [k] fl_change
+ 71.30% 0.03% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 71.27% 0.13% tc [kernel.vmlinux] [k] tcf_action_init
+ 71.06% 0.01% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 70.41% 0.04% tc [act_gact] [k] tcf_gact_init
+ 53.59% 1.21% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 52.34% 0.34% tc [kernel.vmlinux] [k] tcf_idr_create
- 51.23% 2.17% tc [kernel.vmlinux] [k] pcpu_alloc
- 49.05% pcpu_alloc
+ 39.35% __mutex_lock.isra.0 4.99% memset_erms
+ 2.16% pcpu_alloc_area
+ 2.17% __libc_sendmsg
+ 45.89% 44.33% tc [kernel.vmlinux] [k] osq_lock
+ 9.94% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 7.76% 0.00% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 6.50% 0.03% tc [kernel.vmlinux] [k] tfilter_notify
+ 6.24% 6.11% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.73% 5.32% tc [kernel.vmlinux] [k] memset_erms
+ 5.31% 0.18% tc [kernel.vmlinux] [k] tcf_fill_node
Here bottleneck is clearly in pcpu_alloc() function that takes more than
half CPU time, which is mostly wasted busy-waiting for internal percpu
allocator global lock.
With percpu allocation removed (gact drop):
+ 87.50% 0.51% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 86.94% 0.07% tc [kernel.vmlinux] [k] do_syscall_64
+ 85.75% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 85.00% 0.07% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 84.84% 0.07% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 84.59% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 84.58% 0.14% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.95% 0.12% tc [kernel.vmlinux] [k] netlink_unicast
+ 83.34% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 82.39% 0.12% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 82.16% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.13% 0.84% tc [cls_flower] [k] fl_change
+ 69.92% 0.05% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.87% 0.11% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.61% 0.02% tc [kernel.vmlinux] [k] tcf_action_init_1
- 68.80% 0.10% tc [act_gact] [k] tcf_gact_init
- 68.70% tcf_gact_init
+ 36.08% tcf_idr_check_alloc
+ 31.88% tcf_idr_insert
+ 63.72% 0.58% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 58.80% 56.68% tc [kernel.vmlinux] [k] osq_lock
+ 36.08% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 31.88% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
The gact actions (like all other actions types) are inserted in single
idr instance protected by global (per namespace) lock that becomes new
bottleneck with such simple rule profile and prevents achieving 2x+
performance increase that can be expected by looking at profiling data
for insertion action with percpu counter.
Perf profile of run with percpu allocation (tunnel_key+mirred):
+ 91.95% 0.21% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 91.74% 0.06% tc [kernel.vmlinux] [k] do_syscall_64
+ 90.74% 0.01% tc libc-2.29.so [.] __libc_sendmsg
+ 90.52% 0.01% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 90.50% 0.04% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 90.41% 0.02% tc [kernel.vmlinux] [k] sock_sendmsg
+ 90.38% 0.04% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 90.10% 0.06% tc [kernel.vmlinux] [k] netlink_unicast
+ 89.76% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 89.28% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 89.15% 0.03% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 83.41% 0.33% tc [cls_flower] [k] fl_change
+ 81.17% 0.04% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 81.13% 0.06% tc [kernel.vmlinux] [k] tcf_action_init
+ 81.04% 0.04% tc [kernel.vmlinux] [k] tcf_action_init_1
- 73.59% 2.16% tc [kernel.vmlinux] [k] pcpu_alloc
- 71.42% pcpu_alloc
+ 61.41% __mutex_lock.isra.0 5.02% memset_erms
+ 2.93% pcpu_alloc_area
+ 2.16% __libc_sendmsg
+ 63.58% 0.17% tc [kernel.vmlinux] [k] tcf_idr_create
+ 63.40% 0.60% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 57.85% 56.38% tc [kernel.vmlinux] [k] osq_lock
+ 46.27% 0.13% tc [act_tunnel_key] [k] tunnel_key_init
+ 34.26% 0.02% tc [act_mirred] [k] tcf_mirred_init
+ 10.99% 0.00% tc [kernel.vmlinux] [k] dst_cache_init
+ 5.32% 5.11% tc [kernel.vmlinux] [k] memset_erms
With two times more actions pressure on percpu allocator doubles, so now
it takes ~74% of CPU execution time.
With percpu allocation removed (tunnel_key+mirred):
+ 86.02% 0.50% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 85.51% 0.12% tc [kernel.vmlinux] [k] do_syscall_64
+ 84.40% 0.03% tc libc-2.29.so [.] __libc_sendmsg
+ 83.84% 0.03% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 83.72% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 83.56% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 83.50% 0.08% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.02% 0.17% tc [kernel.vmlinux] [k] netlink_unicast
+ 82.48% 0.00% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 81.89% 0.11% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 81.71% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 73.99% 0.63% tc [cls_flower] [k] fl_change
+ 69.72% 0.00% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.72% 0.09% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.53% 0.05% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 53.08% 0.91% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 45.52% 43.99% tc [kernel.vmlinux] [k] osq_lock
- 36.02% 0.21% tc [act_tunnel_key] [k] tunnel_key_init
- 35.81% tunnel_key_init
+ 15.95% tcf_idr_check_alloc
+ 13.91% tcf_idr_insert
- 4.70% dst_cache_init
+ 4.68% pcpu_alloc
+ 33.22% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 32.34% 0.05% tc [act_mirred] [k] tcf_mirred_init
+ 28.24% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 7.79% 0.05% tc [kernel.vmlinux] [k] idr_alloc_u32
+ 7.67% 7.35% tc [kernel.vmlinux] [k] idr_get_free
+ 6.46% 6.22% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.11% 0.05% tc [kernel.vmlinux] [k] tfilter_notify
With percpu allocation removed insertion rate is increased by ~120%.
Such rule profile scales much better than simple single action because
both types of actions were competing for single lock in percpu
allocator, but not for action idr lock, which is per-action. Note that
percpu allocator is still used by dst_cache in tunnel_key actions and
consumes 4.68% CPU time. Dst_cache seems like good opportunity for
further insertion rate optimization but is not addressed by this change.
Another improvement provided by this change is significantly reduced
memory usage. The test is implemented by sampling "used memory" value
from "vmstat -s" command output. Following table includes memory usage
measurements for same two configurations that were used for measuring
insertion rate:
Profile | Mem per rule | Mem per rule no_percpu | Less memory used
| (KB) | (KB) | (KB)
-------------------+--------------+------------------------+------------------
Gact drop | 3.91 | 2.51 | 1.4
tunnel_key+mirred | 6.73 | 3.91 | 2.8
Results indicate that memory usage of percpu allocator per action is
~1.4 KB. Note that any measurements of percpu allocator memory usage is
inherently tied to particular setup since memory usage is linear to
number of cores in system. It is to be expected that on current top of
the line servers percpu allocator memory usage will be 2-5x more than on
24 CPUs setup that was used for testing.
Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory
Patches applied on top of net-next branch:
commit 2203cbf2c8 (net-next) Author:
Russell King <rmk+kernel@armlinux.org.uk> Date: Tue Oct 15 11:38:39 2019
+0100
net: sfp: move fwnode parsing into sfp-bus layer
Changes V1 -> V2:
- Include memory measurements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests to verify action creation with new fast_init flag for all
actions that support the flag.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct tc_action with new "tcfa_flags" field. Set the field in
tcf_idr_create() function and provide new helper
tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags
value. Update individual hardware-offloaded actions init() to pass their
"flags" argument to new helper in order to skip percpu stats allocation
when user requested it through flags.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend TCA_ACT space with nla_bitfield32 flags. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS as the only allowed flag. Parse the flags in
tcf_action_init_1() and pass resulting value as additional argument to
a_o->init().
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify stats update helper functions introduced in previous patches in this
series to fallback to regular tc_action->tcfa_{b|q}stats if cpu stats are
not allocated for the action argument. If regular non-percpu allocated
counters are in use, then obtain action tcfa_lock while modifying them.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous commit introduced helper function for updating qstats and
refactored set of actions to use the helpers, instead of modifying qstats
directly. However, one of the affected action exposes its qstats to
skb_tc_reinsert(), which then modifies it.
Refactor skb_tc_reinsert() to return integer error code and don't increment
overlimit qstats in case of error, and use the returned error code in
tcf_mirred_act() to manually increment the overlimit counter with new
helper function.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
