David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the existing global variables instead of passing them around and
creating duplicate global variables.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus reported that GCC-7.3 generated a switch-table construct that
confused objtool. It turns out that, in particular due to KASAN, it is
possible to have unrelated .rodata usage in between the .rodata setup
for the switch-table and the following indirect jump.
The simple linear reverse search from the indirect jump would hit upon
the KASAN .rodata usage first and fail to find a switch_table,
resulting in a spurious 'sibling call with modified stack frame'
warning.
Fix this by creating a 'jump-stack' which we can 'unwind' during
reversal, thereby skipping over much of the in-between code.
This is not fool proof by any means, but is sufficient to make the
known cases work. Future work would be to construct more comprehensive
flow analysis code.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Getting objtool to understand retpolines is going to be a bit of a
challenge. For now, take advantage of the fact that retpolines are
patched in with alternatives. Just read the original (sane)
non-alternative instruction, and ignore the patched-in retpoline.
This allows objtool to understand the control flow *around* the
retpoline, even if it can't yet follow what's inside. This means the
ORC unwinder will fail to unwind from inside a retpoline, but will work
fine otherwise.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk
Arnd Bergmann reported the following warning with GCC 7.1.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96
And the kbuild robot reported the following warnings with GCC 5.4.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120
Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer. It does:
lea 0x8(%rsp), %rcx
...
mov %rcx, %rsp
Instead of the obvious:
add $0x8, %rsp
It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813
But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while. So for now we have to track register
values when they're loaded with stack pointer offsets.
This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality. Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When GCC realigns a function's stack, it sometimes uses %r13 as the DRAP
register, like:
push %r13
lea 0x10(%rsp), %r13
and $0xfffffffffffffff0, %rsp
pushq -0x8(%r13)
push %rbp
mov %rsp, %rbp
push %r13
...
mov -0x8(%rbp),%r13
leaveq
lea -0x10(%r13), %rsp
pop %r13
retq
Since %r13 was pushed onto the stack twice, its two stack locations need
to be stored separately. The first push of %r13 is its original value,
and the second push of %r13 is the caller's stack frame address.
Since %r13 is a callee-saved register, we need to track the stack
location of its original value separately from the DRAP register.
This fixes the following false positive warning:
lib/ubsan.o: warning: objtool: val_to_string.constprop.7()+0x97: leave instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/3da23a6d4c5b3c1e21fc2ccc21a73941b97ff20a.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.
However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.
As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.
Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.
Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some asm (and inline asm) code does special things to the stack which
objtool can't understand. (Nor can GCC or GNU assembler, for that
matter.) In such cases we need a facility for the code to provide
annotations, so the unwinder can unwind through it.
This provides such a facility, in the form of unwind hints. They're
similar to the GNU assembler .cfi* directives, but they give more
information, and are needed in far fewer places, because objtool can
fill in the blanks by following branches and adjusting the stack pointer
for pushes and pops.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/0f5f3c9104fca559ff4088bece1d14ae3bca52d5.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that objtool knows the states of all registers on the stack for each
instruction, it's straightforward to generate debuginfo for an unwinder
to use.
Instead of generating DWARF, generate a new format called ORC, which is
more suitable for an in-kernel unwinder. See
Documentation/x86/orc-unwinder.txt for a more detailed description of
this new debuginfo format and why it's preferable to DWARF.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c9b9f01ba6c5ed2bdc9bb0957b78167fdbf9632e.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a major rewrite of objtool. Instead of only tracking frame
pointer changes, it now tracks all stack-related operations, including
all register saves/restores.
In addition to making stack validation more robust, this also paves the
way for undwarf generation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
