The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
Fixes: 0401e8548e ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:16d8) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.
Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Link: https://lore.kernel.org/r/20200404153843.9288-1-emmanuelpescosta099@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An empty merge for the original fix for PCM OSS regression where the
same fix is already applied in a different form.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ This is essentially the same fix as commit ae769d3556, but it's
adapted to the latest code for 5.7; hence it contains no Fixes or
other tags for avoid backport confusion -- tiwai ]
The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications. The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.
This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.
Link: https://lore.kernel.org/r/20200403073818.27943-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications. The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.
This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.
Fixes: f2ecf903ef ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Tested-and-reported-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200320084429.1803-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The audio setup on the Lenovo Carbon X1 8th gen is the same as that on
the Lenovo Carbon X1 7th gen, as such it needs the same
ALC285_FIXUP_THINKPAD_HEADSET_JACK quirk.
This fixes volume control of the speaker not working among other things.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1820196
Cc: stable@vger.kernel.org
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200402174311.238614-1-hdegoede@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra
endpoint descriptor.
The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00
As the code in snd_usbmidi_get_ms_info() looks only at the
first extra descriptor to find USB_DT_CS_ENDPOINT the device
as such is recognized but there is neither input nor output
configured.
The patch iterates through the extra descriptors to find the
proper one. With this patch the device is correctly configured.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 645c08f17f
which was reported to break the build a program using this header.
The original issue was addressed in the alsa-lib side recently, so we
can make the header more self-contained again.
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Fixes: 645c08f17f ("ALSA: uapi: Drop asound.h inclusion from asoc.h")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200331090023.8112-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.
These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.
Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.
This change should, for the XPS 13 9350/9360
- Significantly increase volume and audio quality on headphones
- Eliminate headphone popping on suspend/resume
- Allow "Headphone Mic Boost" to be set again, making the headphone
jack fully usable as a microphone jack too.
Fixes: 8c69729b44 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3")
Fixes: 423cd78561 ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360")
Fixes: e4c9fd10eb ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant")
Fixes: 1099f48457 ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
Fixes: e1e8c1fdce ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bf22b417d1f2474b12011c2a39ed6cf8b06d3bf5.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This codec (among others) has a hidden set of audio routes, apparently
designed to allow PC Beep output without a mixer widget on the output
path, which are controlled by an undocumented Realtek vendor register.
The default configuration of these routes means that certain inputs
aren't accessible, necessitating driver control of the register.
However, Realtek has provided no documentation of the register, instead
opting to fix issues by providing magic numbers, most of which have been
at least somewhat erroneous. These magic numbers then get copied by
others into model-specific fixups, leading to a fragmented and buggy set
of configurations.
To get out of this situation, I've reverse engineered the register by
flipping bits and observing how the codec's behavior changes. This
commit documents my findings. It does not change any code.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bd69dfdeaf40ff31c4b7b797c829bb320031739c.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6B03sTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Jm5B/4pb6Hz1ifM+ikR4qB7BOdm/UGzxWlD
Mng+qN3kh6Tx+x8/xnQRmfOnhFoKnDSTnlxcDr6ujAtz3bH+CKXbo2jjfvmagQrW
j87tYGdh6T38E6mf6543Eth3zJGphZYUY70REXt0HsaQ8bA912nrs5H8LTFiD2i+
lBJd/MmlCYL3gb/ftN9dpTfYYdxLy9HH9j5tR5zpLN3AD3Hew9jHqqX+ioAk+6lA
Nisbx5grP10pWFklYXyJlUFQOqMOYMtPMblLRA9bjqcEtL3quIXPXKkPNtTh+0Kf
5t7Q39RtVXJAk0DcatjMJUGAGQyM9r5g1Nk8WLB1LLv+NfLcO6cUpLAc
=+z/q
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.7
This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
On the Lenovo X1C7 machines, after we plug the headset, the rt_resume()
and rt_suspend() of the codec driver will be called periodically, the
driver can't stay in the rt_suspend state even users doen't use the
sound card.
Through debugging, I found when running rt_suspend(), it will call
alc225_shutup(), in this function, it will change 3k pull down control
by alc_update_coef_idx(codec, 0x4a, 0, 3 << 10), this will trigger a
fake key event and that event will resume the codec, when codec
suspend agin, it will trigger the fake key event one more time, this
process will repeat.
If disable the key event before changing the pull down control, it
will not trigger fake key event. It also needs to restore the pull
down control and re-enable the key event, otherwise the system can't
get key event when codec is in rt_suspend state.
Also move some functions ahead of alc225_shutup(), this can save the
function declaration.
Fixes: 76f7dec08f (ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1)
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200329082018.20486-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If SND_HDA_CODEC_CA0132 is enabled, the DSP support should be enabled as
well. Disabled DSP support leads to a hanging alsa system and no sound
output on the card otherwise. Tested on:
06:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://lore.kernel.org/r/20200329053710.4276-1-r.czerwinski@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To handle multiple hardware combinations, this patchset suggests a
single machine driver which will create and initialize dailinks
dynamically. This allows us to support new configurations easily, as
shown with the TigerLake rt5682 example.
Each configuration updates the card component string, and UCM can test
for the presence of components to configure them as needed.
Since we use a single the machine driver name, all previous ACPI
tables need to be updated. That should have no impact since the
machine drivers listed at the time were not upstreamed and are no
longer maintained.
Naveen Manohar (2):
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper
function
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add sof_sdw machine driver
Rander Wang (1):
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire
platforms
sound/soc/intel/boards/Kconfig | 24 +
sound/soc/intel/boards/Makefile | 8 +-
sound/soc/intel/boards/sof_sdw.c | 962 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_common.h | 114 +++
sound/soc/intel/boards/sof_sdw_dmic.c | 42 +
sound/soc/intel/boards/sof_sdw_hdmi.c | 97 ++
sound/soc/intel/boards/sof_sdw_rt1308.c | 151 +++
sound/soc/intel/boards/sof_sdw_rt5682.c | 126 +++
sound/soc/intel/boards/sof_sdw_rt700.c | 125 +++
sound/soc/intel/boards/sof_sdw_rt711.c | 156 +++
sound/soc/intel/boards/sof_sdw_rt715.c | 42 +
.../intel/common/soc-acpi-intel-cml-match.c | 24 +-
.../intel/common/soc-acpi-intel-icl-match.c | 6 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 30 +-
14 files changed, 1896 insertions(+), 11 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw.c
create mode 100644 sound/soc/intel/boards/sof_sdw_common.h
create mode 100644 sound/soc/intel/boards/sof_sdw_dmic.c
create mode 100644 sound/soc/intel/boards/sof_sdw_hdmi.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1308.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt5682.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt700.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715.c
--
2.20.1
There are a couple of statements that are not indented correctly,
add in the missing tab and break the lines to address a checkpatch
warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200327141429.269191-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove undocumented and unneeded ti,use-internal-reg from the example as
it was an artifact from initial development. The code does not query
for this property and as the document indicates if areg-supply is
undefined then the internal regulator is used.
Fixes: 302c0b7490cd ("dt-bindings: sound: Add TLV320ADCx140 dt
bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200327162432.17067-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Google Volteer device. As per new unified soundwire machine
driver, add rt5682-sdw helper function, which configures codec to Link0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This machine driver provides support for different configurations:
RT700, RT711, RT1308 (1x and 2x, I2S or SoundWire mode), and RT715
CometLake, Icelake, TigerLake.
PDM digital microphones
HDMI
To avoid introducing one driver per configuration, this common machine
driver relies on platform-specific information, tables and quirks to
dynamically create the relevant dailinks.
Unlike a lot of machine drivers, we use different DAI links for
SoundWire capture and playback since the Cadence PDIs can do capture
OR playback, not both simultaneously.
For each configuration, the card component string is updated so that UCM
can select the relevant parts.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update topology and reflect change to unified machine driver for SoundWire.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset provides the support for SoundWire support on Intel
CometLake, IcelLake and TigerLake RVP platforms and form-factor
devices to be released 'soon'.
The bulk of the code is about detecting a valid SoundWire
configuration from ACPI, and implementing the interfaces suggested in
'[PATCH 0/8] soundwire: remove platform devices, add SOF interfaces'
for interrupts, PCI wakes and clock-stop configurations.
Since that SoundWire series will not be in 5.7, the build support for
SOF w/ SoundWire is not provided for now, and fall-back functions will
be used. This code is tested on a daily basis in the SOF tree and is
not expected to change in significant ways.
Changes since v2:
Corrected error in ACPI table (thanks Amadeusz)
Added patch 11 to add reset cycle required on some SoundWire platforms
Bard Liao (1):
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt
handlers
Pierre-Louis Bossart (8):
ASoC: soc-acpi: expand description of _ADR-based devices
ASoC: SOF: Intel: add SoundWire configuration interface
ASoC: SOF: IPC: dai-intel: move ALH declarations in header file
ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks
ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect
ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop
quirks
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing
capabilities
Rander Wang (2):
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
include/sound/soc-acpi.h | 39 +-
include/sound/sof/dai-intel.h | 18 +-
.../intel/common/soc-acpi-intel-cml-match.c | 87 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 97 ++++-
.../intel/common/soc-acpi-intel-tgl-match.c | 49 ++-
sound/soc/sof/intel/hda-ctrl.c | 25 +-
sound/soc/sof/intel/hda-dsp.c | 2 +
sound/soc/sof/intel/hda-loader.c | 31 ++
sound/soc/sof/intel/hda.c | 400 ++++++++++++++++++
sound/soc/sof/intel/hda.h | 66 +++
10 files changed, 750 insertions(+), 64 deletions(-)
--
2.20.1
The SoundWire mode doesn't need the DAI clocks.
Therefore, the DAI clock registry moves to I2S mode case.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If pci device is in D0, wakeen interrupt will be
aggregated at cAVS level as interrupt. This commit
check the wakeen status and process it in irq thread
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a SoundWire link is in clock stop state, a Slave device may wake
up the Master for some events such as jack detection. The WAKEEN
interrupt will be triggered and processed by the audio pci device.
If audio device is in D3, the interrupt will be routed to PME, or
aggregated at cAVS level as interrupt when audio device is in D0. This
patch only supports D3 case, where the audio pci device will be
resumed by a PME event and the WAKEEN interrupt will be processed
after audio pci device is powered up and ROM is initialized
successfully.
The WAKEEN handling is only enabled after the first boot due to
dependencies on a shim_lock mutex being initialized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a single irq handler for SOF interrupts. We can further merge
SoundWire ones to completely remove MSI interrupts handling issues
leading to timeouts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doing this avoid conflicts and errors reported on the bus.
The interrupts are only re-enabled on resume after the firmware is
downloaded, so the behavior is not fully symmetric
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For now we have a limited number of machine driver configurations, and
we can detect them based on the link configuration returned after
checking hardware and firmware (BIOS) configurations.
The link configuration is checked with a link_mask as well as a list
of _ADR descriptors for each link.
There is a chance that in extreme cases where the BIOS contains too
much information we would need to detect which Slave devices actually
report as 'attached'. This would be more accurate than static
table-based solutions, but it also introduces timing dependencies
since we don't know when those devices might become attached, so will
only be only be looked at if we see limitations with static methods
and the usual quirks based e.g. on DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are invoked when a matching hw_params/hw_free() DAI
operation takes place, and will result in IPC operations with the SOF
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALH was inserted in the wrong place during integration, add after DMIC
to mirror the file used by SOF firmware.
No functional change, just text move in the same file to better track
changes, if any.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.
The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)
However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire, we need to know if endpoints needs to be 'aggregated'
(MIPI parlance, meaning logically grouped), e.g. when two speaker
amplifiers need to be handled as a single logical output.
We don't necessarily have the information at the firmware (BIOS)
level, so add a notion of endpoints and specify if a device/endpoint
is part of a group, with a position.
This may be expanded in future solutions, for now only provide a group
and position information.
Since we modify the header file, change all existing upstream tables
as well to avoid breaking compilation/bisect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
