Create new functions mlx5e_{open,close}_queues to encapsulate opening
and closing RQs and SQs, and call the new functions from
mlx5e_{open,close}_channel. It simplifies the existing functions a bit
and prepares them for the upcoming AF_XDP changes.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the existing mlx5e_get_linear_rq_headroom function to calculate the
headroom for mlx5e_xdp_max_mtu. This function takes the XSK headroom
into consideration, which will be used in the following patches.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When an XDP program returns XDP_TX, and the RQ is XSK-enabled, it
requires careful handling, because convert_to_xdp_frame creates a new
page and copies the data there, while our driver expects the xdp_frame
to point to the same memory as the xdp_buff. Handle this case
separately: map the page, and in the end unmap it and call
xdp_return_frame.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Put the XDP SQ that is used for XDP_TX into the channel. It used to be a
part of the RQ, but with introduction of AF_XDP there will be one more
RQ that could share the same XDP SQ. This patch is a preparation for
that change.
Separate XDP_TX statistics per RQ were implemented in one of the previous
patches.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, struct mlx5e_xdp_info has some issues that have to be cleaned
up before the upcoming AF_XDP support makes things too complicated and
messy. This structure is used both when sending the packet and on
completion. Moreover, the cleanup procedure on completion depends on the
origin of the packet (XDP_REDIRECT, XDP_TX). Adding AF_XDP support will
add new flows that use this structure even differently. To avoid
overcomplicating the code, this commit refactors the usage of this
structure in the following ways:
1. struct mlx5e_xdp_info is split into two different structures. One is
struct mlx5e_xdp_xmit_data, a transient structure that doesn't need to
be stored and is only used while sending the packet. The other is still
struct mlx5e_xdp_info that is stored in a FIFO and contains the fields
needed on completion.
2. The fields of struct mlx5e_xdp_info that are used in different flows
are put into a union. A special enum indicates the cleanup mode and
helps choose the right union member. This approach is clear and
explicit. Although it could be possible to "guess" the mode by looking
at the values of the fields and at the XDP SQ type, it wouldn't be that
clear and extendable and would require looking through the whole chain
to understand what's going on.
For the reference, there are the fields of struct mlx5e_xdp_info that
are used in different flows (including AF_XDP ones):
Packet origin | Fields used on completion | Cleanup steps
-----------------------+---------------------------+------------------
XDP_REDIRECT, | xdpf, dma_addr | DMA unmap and
XDP_TX from XSK RQ | | xdp_return_frame.
-----------------------+---------------------------+------------------
XDP_TX from regular RQ | di | Recycle page.
-----------------------+---------------------------+------------------
AF_XDP TX | (none) | Increment the
| | producer index in
| | Completion Ring.
On send, the same set of mlx5e_xdp_xmit_data fields is used in all
flows: DMA and virtual addresses and length.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Prepare to creation of the XSK RQ, which will require posting UMRs, too.
The same ICO SQ will be used for both RQs and also to trigger interrupts
by posting NOPs. UMR WQEs can't be reused any more. Optimization
introduced in commit ab966d7e4f ("net/mlx5e: RX, Recycle buffer of
UMR WQEs") is reverted.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Additional conditions introduced:
- XSK implies XDP.
- Headroom includes the XSK headroom if it exists.
- No space is reserved for struct shared_skb_info in XSK mode.
- Fragment size smaller than the XSK chunk size is not allowed.
A new auxiliary function mlx5e_get_linear_rq_headroom with the support
for XSK is introduced. Use this function in the implementation of
mlx5e_get_rq_headroom. Change headroom to u32 to match the headroom
field in struct xdp_umem.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The PCI API for DMA is deprecated, and PCI_DMA_TODEVICE is just defined
to DMA_TO_DEVICE for backward compatibility. Just use DMA_TO_DEVICE.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some drivers want to access the data transmitted in order to implement
acceleration features of the NICs. It is also useful in AF_XDP TX flow.
Change the xsk_umem_consume_tx API to return the whole xdp_desc, that
contains the data pointer, length and DMA address, instead of only the
latter two. Adapt the implementation of i40e and ixgbe to this change.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The typical XDP memory scheme is one packet per page. Change the AF_XDP
frame size in libbpf to 4096, which is the page size on x86, to allow
libbpf to be used with the drivers with the packet-per-page scheme.
Add a command line option -f to xdpsock to allow to specify a custom
frame size.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Query XDP_OPTIONS in libbpf to determine if the zero-copy mode is active
or not.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make it possible for the application to determine whether the AF_XDP
socket is running in zero-copy mode. To achieve this, add a new
getsockopt option XDP_OPTIONS that returns flags. The only flag
supported for now is the zero-copy mode indicator.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a function that checks whether the Fill Ring has the specified
amount of descriptors available. It will be useful for mlx5e that wants
to check in advance, whether it can allocate a bulk of RX descriptors,
to get the best performance.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When an XDP program is set, a full reopen of all channels happens in two
cases:
1. When there was no program set, and a new one is being set.
2. When there was a program set, but it's being unset.
The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Since commit 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf
from cgroup itself"), cgroup_bpf release occurs asynchronously
(from a worker context), and before the release of the cgroup itself.
This introduced a previously non-existing race between the release
and update paths. E.g. if a leaf's cgroup_bpf is released and a new
bpf program is attached to the one of ancestor cgroups at the same
time. The race may result in double-free and other memory corruptions.
To fix the problem, let's protect the body of cgroup_bpf_release()
with cgroup_mutex, as it was effectively previously, when all this
code was called from the cgroup release path with cgroup mutex held.
Also let's skip cgroups, which have no chances to invoke a bpf
program, on the update path. If the cgroup bpf refcnt reached 0,
it means that the cgroup is offline (no attached processes), and
there are no associated sockets left. It means there is no point
in updating effective progs array! And it can lead to a leak,
if it happens after the release. So, let's skip such cgroups.
Big thanks for Tejun Heo for discovering and debugging of this problem!
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix sparse warning:
net/core/xdp.c:88:6: warning:
symbol '__mem_id_disconnect' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, each xdp samples are inconsistent in the use.
Most of the samples fetch the interface with it's name.
(ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.)
But some of the xdp samples are fetching the interface with
ifindex by command argument.
This commit enables xdp samples to fetch interface with it's name
without changing the original index interface fetching.
(<ifname|ifindex> fetching in the same way as xdp_sample_pkts_user.c does.)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With CONFIG_MODULES=n, the following compiler warning occurs:
/data/users/yhs/work/net-next/kernel/trace/bpf_trace.c:605:13: warning:
‘do_bpf_send_signal’ defined but not used [-Wunused-function]
static void do_bpf_send_signal(struct irq_work *entry)
The __init function send_signal_irq_work_init(), which calls
do_bpf_send_signal(), is defined under CONFIG_MODULES. Hence,
when CONFIG_MODULES=n, nobody calls static function do_bpf_send_signal(),
hence the warning.
The init function send_signal_irq_work_init() should work without
CONFIG_MODULES. Moving it out of CONFIG_MODULES
code section fixed the compiler warning, and also make bpf_send_signal()
helper work without CONFIG_MODULES.
Fixes: 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
Reported-By: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Non-BPF (user land) part of selftests is built without debug info making
occasional debugging with gdb terrible. Build with debug info always.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It fixes build error for 32bit caused by type mismatch
size_t/unsigned long.
Fixes: bf82927125 ("libbpf: refactor map initialization")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP_TX is similar to XDP_REDIRECT as it essentially redirects packets to
the device itself. XDP_REDIRECT has bulk transmit mechanism to avoid the
heavy cost of indirect call but it also reduces lock acquisition on the
destination device that needs locks like veth and tun.
XDP_TX does not use indirect calls but drivers which require locks can
benefit from the bulk transmit for XDP_TX as well.
This patch introduces bulk transmit mechanism in veth using bulk queue
on stack, and improves XDP_TX performance by about 9%.
Here are single-core/single-flow XDP_TX test results. CPU consumptions
are taken from "perf report --no-child".
- Before:
7.26 Mpps
_raw_spin_lock 7.83%
veth_xdp_xmit 12.23%
- After:
7.94 Mpps
_raw_spin_lock 1.08%
veth_xdp_xmit 6.10%
v2:
- Use stack for bulk queue instead of a global variable.
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is introduced for admins to check what is happening on XDP_TX when
bulk XDP_TX is in use, which will be first introduced in veth in next
commit.
v3:
- Add act field to be in line with other XDP tracepoints.
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix documentation that mention xdpsock_kern.c which has been
replaced by code embedded in libbpf.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are several spelling mistakes in pr_warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ibumad example was implementing the bpf_debug macro which is exactly the
same as the bpf_printk macro available in bpf_helpers.h. This change
makes use of bpf_printk instead of bpf_debug.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wei Wang says:
====================
ipv6: avoid taking refcnt on dst during route lookup
Ipv6 route lookup code always grabs refcnt on the dst for the caller.
But for certain cases, grabbing refcnt is not always necessary if the
call path is rcu protected and the caller does not cache the dst.
Another issue in the route lookup logic is:
When there are multiple custom rules, we have to do the lookup into
each table associated to each rule individually. And when we can't
find the route in one table, we grab and release refcnt on
net->ipv6.ip6_null_entry before going to the next table.
This operation is completely redundant, and causes false issue because
net->ipv6.ip6_null_entry is a shared object.
This patch set introduces a new flag RT6_LOOKUP_F_DST_NOREF for route
lookup callers to set, to avoid any manipulation on the dst refcnt. And
it converts the major input and output path to use it.
The performance gain is noticable.
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps
v2->v3:
- Handled fib6_rule_lookup() when CONFIG_IPV6_MULTIPLE_TABLES is not
configured in patch 03 (suggested by David Ahern)
- Removed the renaming of l3mdev_link_scope_lookup() in patch 05
(suggested by David Ahern)
- Moved definition of ip6_route_output_flags() from an inline function
in /net/ipv6/route.c to net/ipv6/route.c in order to address kbuild
error in patch 05
v1->v2:
- Added a helper ip6_rt_put_flags() in patch 3 suggested by David Miller
====================
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For tx path, in most cases, we still have to take refcnt on the dst
cause the caller is caching the dst somewhere. But it still is
beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the
route lookup. It is cause this flag prevents manipulating refcnt on
net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each
routing table. The null_entry is a shared object and constant updates on
it cause false sharing.
We converted the current major lookup function ip6_route_output_flags()
to make use of RT6_LOOKUP_F_DST_NOREF.
Together with the change in the rx path, we see noticable performance
boost:
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_route_input() is the key function to do the route lookup in the
rx data path. All the callers to this function are already holding rcu
lock. So it is fairly easy to convert it to not take refcnt on the dst:
We pass in flag RT6_LOOKUP_F_DST_NOREF and do skb_dst_set_noref().
This saves a few atomic inc or dec operations and should boost
performance overall.
This also makes the logic more aligned with v4.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch specifically converts the rule lookup logic to honor this
flag and not release refcnt when traversing each rule and calling
lookup() on each routing table.
Similar to previous patch, we also need some special handling of dst
entries in uncached list because there is always 1 refcnt taken for them
even if RT6_LOOKUP_F_DST_NOREF flag is set.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize rt6->rt6i_uncached on the following pre-allocated dsts:
net->ipv6.ip6_null_entry
net->ipv6.ip6_prohibit_entry
net->ipv6.ip6_blk_hole_entry
This is a preparation patch for later commits to be able to distinguish
dst entries in uncached list by doing:
!list_empty(rt6->rt6i_uncached)
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This new flag is to instruct the route lookup function to not take
refcnt on the dst entry. The user which does route lookup with this flag
must properly use rcu protection.
ip6_pol_route() is the major route lookup function for both tx and rx
path.
In this function:
Do not take refcnt on dst if RT6_LOOKUP_F_DST_NOREF flag is set, and
directly return the route entry. The caller should be holding rcu lock
when using this flag, and decide whether to take refcnt or not.
One note on the dst cache in the uncached_list:
As uncached_list does not consume refcnt, one refcnt is always returned
back to the caller even if RT6_LOOKUP_F_DST_NOREF flag is set.
Uncached dst is only possible in the output path. So in such call path,
caller MUST check if the dst is in the uncached_list before assuming
that there is no refcnt taken on the returned dst.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There seems to be some confusion surrounding three PHY interface modes,
specifically 1000BASE-X, 2500BASE-X and SGMII. Add some documentation
to phylib detailing precisely what these interface modes refer to.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The linux-next commit "inet: fix various use-after-free in defrags
units" [1] introduced compilation warnings,
./include/net/inet_frag.h:117:1: warning: 'inline' is not at beginning
of declaration [-Wold-style-declaration]
static void inline fqdir_pre_exit(struct fqdir *fqdir)
^~~~~~
In file included from ./include/net/netns/ipv4.h:10,
from ./include/net/net_namespace.h:20,
from ./include/linux/netdevice.h:38,
from ./include/linux/icmpv6.h:13,
from ./include/linux/ipv6.h:86,
from ./include/net/ipv6.h:12,
from ./include/rdma/ib_verbs.h:51,
from ./include/linux/mlx5/device.h:37,
from ./include/linux/mlx5/driver.h:51,
from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:
[1] https://lore.kernel.org/netdev/20190618180900.88939-3-edumazet@google.com/
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a no-op that simply moves all locking and unlocking of
->reg_lock into trivial helpers. I did that to be able to easily add
some ad hoc instrumentation to those helpers to get some information
on contention and hold times of the mutex. Perhaps others want to do
something similar at some point, so this frees them from doing the
'sed -i' yoga, and have a much smaller 'git diff' while fiddling.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code of create_queues_with_size_backoff() allows the ring size
to become as small as ENA_MIN_RING_SIZE/2. This is a bug since we don't
want the queue ring to be smaller than ENA_MIN_RING_SIZE
In this commit we change the loop's termination condition to look at the
queue size of the next iteration instead of that of the current one,
so that the minimal queue size again becomes ENA_MIN_RING_SIZE.
Fixes: eece4d2ab9 ("net: ena: add ethtool function for changing io queue sizes")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently pointer hwdev is dereferenced when assigning hwif before
hwdev is null checked. Fix this by only derefencing hwdev after the
null check.
Addresses-Coverity: ("Dereference before null check")
Fixes: 4fdc51bb4e ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
René van Dorst says:
====================
net: mediatek: Add MT7621 TRGMII mode support
Like many other mediatek SOCs, the MT7621 SOC and the internal MT7530
switch both supports TRGMII mode. MT7621 TRGMII speed is fix 1200MBit.
v1->v2:
- Fix breakage on non MT7621 SOC
- Support 25MHz and 40MHz XTAL as MT7530 clocksource
====================
Tested-by: "Frank Wunderlich" <frank-w@public-files.de>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support TRGMII mode for MT7621 internal MT7530 switch.
MT7621 TRGMII has only one fix speed mode of 1200MBit.
Also adding support for mt7530 25MHz and 40MHz crystal clocksource.
Values are based on Banana Pi R2 bsp [1].
Don't change MT7623 registers on a MT7621 device.
[1] https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/master/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L769
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
MT7621 SOC also supports TRGMII.
TRGMII speed is 1200MBit.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ops has been iterated to first element when call pre_exit, and
it needs to restore from save_ops, not save ops to save_ops
Fixes: d7d99872c1 ("netns: add pre_exit method to struct pernet_operations")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some changes to the TCP fastopen code to make it more robust
against future changes in the choice of key/cookie size, etc.
- Instead of keeping the SipHash key in an untyped u8[] buffer
and casting it to the right type upon use, use the correct
type directly. This ensures that the key will appear at the
correct alignment if we ever change the way these data
structures are allocated. (Currently, they are only allocated
via kmalloc so they always appear at the correct alignment)
- Use DIV_ROUND_UP when sizing the u64[] array to hold the
cookie, so it is always of sufficient size, even if
TCP_FASTOPEN_COOKIE_MAX is no longer a multiple of 8.
- Drop the 'len' parameter from the tcp_fastopen_reset_cipher()
function, which is no longer used.
- Add endian swabbing when setting the keys and calculating the hash,
to ensure that cookie values are the same for a given key and
source/destination address pair regardless of the endianness of
the server.
Note that none of these are functional changes wrt the current
state of the code, with the exception of the swabbing, which only
affects big endian systems.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
Heiner Kallweit says:
====================
PCI: let pci_disable_link_state propagate errors
Drivers like r8169 rely on pci_disable_link_state() having disabled
certain ASPM link states. If OS can't control ASPM then
pci_disable_link_state() turns into a no-op w/o informing the caller.
The driver therefore may falsely assume the respective ASPM link
states are disabled. Let pci_disable_link_state() propagate errors
to the caller, enabling the caller to react accordingly.
I'd propose to let this series go through the netdev tree if the PCI
core extension is acked by the PCI people.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Certain chip version / board combinations have massive problems if
ASPM is active. If BIOS enables ASPM and doesn't let OS control it,
then we may have a problem with the current code. Therefore check the
return code of pci_disable_link_state() and don't enable ASPM in the
network chip if OS can't control ASPM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers may rely on pci_disable_link_state() having disabled certain
ASPM link states. If OS can't control ASPM then pci_disable_link_state()
turns into a no-op w/o informing the caller. The driver therefore may
falsely assume the respective ASPM link states are disabled.
Let pci_disable_link_state() propagate errors to the caller, enabling
the caller to react accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac6 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
