Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.
Most of the patch is really adding EPT support to the testing
framework.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shadow paging is fundamentally incompatible with the page-modification
log, because the GPAs in the log come from the wrong memory map.
In particular, for the EPT page-modification log, the GPAs in the log come
from L2 rather than L1. (If there was a non-EPT page-modification log,
we couldn't use it for shadow paging because it would log GVAs rather
than GPAs).
Therefore, we need to rely on write protection to record dirty pages.
This has the side effect of bypassing PML, since writes now result in an
EPT violation vmexit.
This is relatively easy to add to KVM, because pretty much the only place
that needs changing is spte_clear_dirty. The first access to the page
already goes through the page fault path and records the correct GPA;
it's only subsequent accesses that are wrong. Therefore, we can equip
set_spte (where the first access happens) to record that the SPTE will
have to be write protected, and then spte_clear_dirty will use this
information to do the right thing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we are overloading SPTE_SPECIAL_MASK to mean both
"A/D bits unavailable" and MMIO, where the difference between the
two is determined by mio_mask and mmio_value.
However, the next patch will need two bits to distinguish
availability of A/D bits from write protection. So, while at
it give MMIO its own bit pattern, and move the two bits from
bit 62 to bits 52..53 since Intel is allocating EPT page table
bits from the top.
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I was surprised to see that the guest reported `fxsave_leak' while the
host did not. After digging deeper I noticed that the bits are simply
masked out during enumeration.
The XSAVEERPTR feature is actually a bug fix on AMD which means the
kernel can disable a workaround.
Pass XSAVEERPTR to the guest if available on the host.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CLZERO is available to the guest if it is supported on the
host. Therefore, enumerate support for the instruction in
KVM_GET_SUPPORTED_CPUID whenever it is supported on the host.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the guest CPUID information represents an AMD vCPU, return all
zeroes for queries of undefined CPUID leaves, whether or not they are
in range.
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: bd22f5cfcf ("KVM: move and fix substitue search for missing CPUID entries")
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For these CPUID leaves, the EDX output is not dependent on the ECX
input (i.e. the SIGNIFCANT_INDEX flag doesn't apply to
EDX). Furthermore, the low byte of the ECX output is always identical
to the low byte of the ECX input. KVM does not produce the correct ECX
and EDX outputs for any undefined subleaves beyond the first.
Special-case these CPUID leaves in kvm_cpuid, so that the ECX and EDX
outputs are properly generated for all undefined subleaves.
Fixes: 0771671749 ("KVM: Enhance guest cpuid management")
Fixes: a87f2d3a6e ("KVM: x86: Add Intel CPUID.1F cpuid emulation support")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
WARNING: CPU: 0 PID: 6544 at /home/kernel/data/kvm/arch/x86/kvm//vmx/vmx.c:4689 handle_desc+0x37/0x40 [kvm_intel]
CPU: 0 PID: 6544 Comm: a.out Tainted: G OE 5.3.0-rc4+ #4
RIP: 0010:handle_desc+0x37/0x40 [kvm_intel]
Call Trace:
vmx_handle_exit+0xbe/0x6b0 [kvm_intel]
vcpu_enter_guest+0x4dc/0x18d0 [kvm]
kvm_arch_vcpu_ioctl_run+0x407/0x660 [kvm]
kvm_vcpu_ioctl+0x3ad/0x690 [kvm]
do_vfs_ioctl+0xa2/0x690
ksys_ioctl+0x6d/0x80
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x74/0x720
entry_SYSCALL_64_after_hwframe+0x49/0xbe
When CR4.UMIP is set, guest should have UMIP cpuid flag. Current
kvm set_sregs function doesn't have such check when userspace inputs
sregs values. SECONDARY_EXEC_DESC is enabled on writes to CR4.UMIP
in vmx_set_cr4 though guest doesn't have UMIP cpuid flag. The testcast
triggers handle_desc warning when executing ltr instruction since
guest architectural CR4 doesn't set UMIP. This patch fixes it by
adding valid CR4 and CPUID combination checking in __set_sregs.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=138efb99600000
Reported-by: syzbot+0f1819555fbdce992df9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't return -E2BIG from __do_cpuid_func when processing function 0BH
or 1FH and the last interesting subleaf occupies the last allocated
entry in the result array.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 831bf664e9 ("KVM: Refactor and simplify kvm_dev_ioctl_get_supported_cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5000 guest cycles delta is easy to encounter on desktop, per-vCPU
lapic_timer_advance_ns always keeps at 1000ns initial value, let's
loosen the filter a bit to let adaptive tuning make progress.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM was incorrectly checking vmcs12->host_ia32_efer even if the "load
IA32_EFER" exit control was reset. Also, some checks were not using
the new CC macro for tracing.
Cleanup everything so that the vCPU's 64-bit mode is determined
directly from EFER_LMA and the VMCS checks are based on that, which
matches section 26.2.4 of the SDM.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Fixes: 5845038c11
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following was reported on i386:
arch/x86/kvm/vmx/vmx.c: In function 'hv_enable_direct_tlbflush':
arch/x86/kvm/vmx/vmx.c:503:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
pr_debugs() in this function are more or less useless, let's just
remove them. evmcs->hv_vm_id can use 'unsigned long' instead of 'u64'.
Also, simplify the code a little bit.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the kvm_rebooting check from VMX/SVM instruction exception fixup
now that kvm_spurious_fault() conditions its BUG() on !kvm_rebooting.
Because the 'cleanup_insn' functionally is also gone, deferring to
kvm_spurious_fault() means __kvm_handle_fault_on_reboot() can eliminate
its .fixup code entirely and have its exception table entry branch
directly to the call to kvm_spurious_fault().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the variation of __kvm_handle_fault_on_reboot() that accepts a
post-fault cleanup instruction now that its sole user (VMREAD) uses
a different method for handling faults.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that VMREAD flows require a taken branch, courtesy of commit
3901336ed9 ("x86/kvm: Don't call kvm_spurious_fault() from .fixup")
bite the bullet and add full error handling to VMREAD, i.e. replace the
JMP added by __ex()/____kvm_handle_fault_on_reboot() with a hinted Jcc.
To minimize the code footprint, add a helper function, vmread_error(),
to handle both faults and failures so that the inline flow has a single
CALL.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the VMX instruction helpers using asm-goto to branch directly
to error/fault "handlers" in lieu of using __ex(), i.e. the generic
____kvm_handle_fault_on_reboot(). Branching directly to fault handling
code during fixup avoids the extra JMP that is inserted after every VMX
instruction when using the generic "fault on reboot" (see commit
3901336ed9, "x86/kvm: Don't call kvm_spurious_fault() from .fixup").
Opportunistically clean up the helpers so that they all have consistent
error handling and messages.
Leave the usage of ____kvm_handle_fault_on_reboot() (via __ex()) in
kvm_cpu_vmxoff() and nested_vmx_check_vmentry_hw() as is. The VMXOFF
case is not a fast path, i.e. the cleanliness of __ex() is worth the
JMP, and the extra JMP in nested_vmx_check_vmentry_hw() is unavoidable.
Note, VMREAD cannot get the asm-goto treatment as output operands aren't
compatible with GCC's asm-goto due to internal compiler restrictions.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking
BUG(), as opposed to assuming the caller has already done so. Letting
kvm_spurious_fault() be called "directly" will allow VMX to better
optimize its low level assembly flows.
As a happy side effect, kvm_spurious_fault() no longer needs to be
marked as a dead end since it doesn't unconditionally BUG().
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit e8bb4755eea2("KVM: selftests: Split ucall.c into architecture
specific files") selftests which use ucall on x86 started segfaulting and
apparently it's gcc to blame: it "optimizes" ucall() function throwing away
va_start/va_end part because it thinks the structure is not being used.
Previously, it couldn't do that because the there was also MMIO version and
the decision which particular implementation to use was done at runtime.
With older gccs it's possible to solve the problem by adding 'volatile'
to 'struct ucall' but at least with gcc-8.3 this trick doesn't work.
'memory' clobber seems to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch reverts commit 75437bb304 (locking/pvqspinlock: Don't
wait if vCPU is preempted). A large performance regression was caused
by this commit. on over-subscription scenarios.
The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads,
with three VMs of 80 vCPUs each. The score of ebizzy -M is reduced from
13000-14000 records/s to 1700-1800 records/s:
Host Guest score
vanilla w/o kvm optimizations upstream 1700-1800 records/s
vanilla w/o kvm optimizations revert 13000-14000 records/s
vanilla w/ kvm optimizations upstream 4500-5000 records/s
vanilla w/ kvm optimizations revert 14000-15500 records/s
Exit from aggressive wait-early mechanism can result in premature yield
and extra scheduling latency.
Actually, only 6% of wait_early events are caused by vcpu_is_preempted()
being true. However, when one vCPU voluntarily releases its vCPU, all
the subsequently waiters in the queue will do the same and the cascading
effect leads to bad performance.
kvm optimizations:
[1] commit d73eb57b80 (KVM: Boost vCPUs that are delivering interrupts)
[2] commit 266e85a5ec (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption)
Tested-by: loobinliu@tencent.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: loobinliu@tencent.com
Cc: stable@vger.kernel.org
Fixes: 75437bb304 (locking/pvqspinlock: Don't wait if vCPU is preempted)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allowing an unlimited number of MSRs to be specified via the VMX
load/store MSR lists (e.g., vm-entry MSR load list) is bad for two
reasons. First, a guest can specify an unreasonable number of MSRs,
forcing KVM to process all of them in software. Second, the SDM bounds
the number of MSRs allowed to be packed into the atomic switch MSR lists.
Quoting the "Miscellaneous Data" section in the "VMX Capability
Reporting Facility" appendix:
"Bits 27:25 is used to compute the recommended maximum number of MSRs
that should appear in the VM-exit MSR-store list, the VM-exit MSR-load
list, or the VM-entry MSR-load list. Specifically, if the value bits
27:25 of IA32_VMX_MISC is N, then 512 * (N + 1) is the recommended
maximum number of MSRs to be included in each list. If the limit is
exceeded, undefined processor behavior may result (including a machine
check during the VMX transition)."
Because KVM needs to protect itself and can't model "undefined processor
behavior", arbitrarily force a VM-entry to fail due to MSR loading when
the MSR load list is too large. Similarly, trigger an abort during a VM
exit that encounters an MSR load list or MSR store list that is too large.
The MSR list size is intentionally not pre-checked so as to maintain
compatibility with hardware inasmuch as possible.
Test these new checks with the kvm-unit-test "x86: nvmx: test max atomic
switch MSRs".
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The RDPRU instruction gives the guest read access to the IA32_APERF
MSR and the IA32_MPERF MSR. According to volume 3 of the APM, "When
virtualization is enabled, this instruction can be intercepted by the
Hypervisor. The intercept bit is at VMCB byte offset 10h, bit 14."
Since we don't enumerate the instruction in KVM_SUPPORTED_CPUID,
intercept it and synthesize #UD.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Drew Schmitt <dasch@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the Intel SDM, volume 2, "CPUID," the index is
significant (or partially significant) for CPUID leaves 0FH, 10H, 12H,
17H, 18H, and 1FH.
Add the corresponding flag to these CPUID leaves in do_host_cpuid().
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Fixes: a87f2d3a6e ("KVM: x86: Add Intel CPUID.1F cpuid emulation support")
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not skip invalid shadow pages when zapping obsolete pages if the
pages' root_count has reached zero, in which case the page can be
immediately zapped and freed.
Update the comment accordingly.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Toggle mmu_valid_gen between '0' and '1' instead of blindly incrementing
the generation. Because slots_lock is held for the entire duration of
zapping obsolete pages, it's impossible for there to be multiple invalid
generations associated with shadow pages at any given time.
Toggling between the two generations (valid vs. invalid) allows changing
mmu_valid_gen from an unsigned long to a u8, which reduces the size of
struct kvm_mmu_page from 160 to 152 bytes on 64-bit KVM, i.e. reduces
KVM's memory footprint by 8 bytes per shadow page.
Set sp->mmu_valid_gen before it is added to active_mmu_pages.
Functionally this has no effect as kvm_mmu_alloc_page() has a single
caller that sets sp->mmu_valid_gen soon thereafter, but visually it is
jarring to see a shadow page being added to the list without its
mmu_valid_gen first being set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
the performance tweaks for fast invalidation that existed prior to its
removal.
Paraphrasing the original changelog (commit 5ff0568374 was itself a
partial revert):
Don't force reloading the remote mmu when zapping an obsolete page, as
a MMU_RELOAD request has already been issued by kvm_mmu_zap_all_fast()
immediately after incrementing mmu_valid_gen, i.e. after marking pages
obsolete.
This reverts commit 5ff0568374.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
the performance tweaks for fast invalidation that existed prior to its
removal.
Paraphrashing the original changelog:
Introduce a per-VM list to track obsolete shadow pages, i.e. pages
which have been deleted from the mmu cache but haven't yet been freed.
When page reclaiming is needed, zap/free the deleted pages first.
This reverts commit 52d5dedc79.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
the performance tweaks for fast invalidation that existed prior to its
removal.
Paraphrashing the original changelog:
Reload the mmu on all vCPUs after updating the generation number so
that obsolete pages are not used by any vCPUs. This allows collapsing
all TLB flushes during obsolete page zapping into a single flush, as
there is no need to flush when dropping mmu_lock (to reschedule).
Note: a remote TLB flush is still needed before freeing the pages as
other vCPUs may be doing a lockless shadow page walk.
Opportunstically improve the comments restored by the revert (the
code itself is a true revert).
This reverts commit f34d251d66.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
the performance tweaks for fast invalidation that existed prior to its
removal.
Paraphrashing the original changelog:
Zap at least 10 shadow pages before releasing mmu_lock to reduce the
overhead associated with re-acquiring the lock.
Note: "10" is an arbitrary number, speculated to be high enough so
that a vCPU isn't stuck zapping obsolete pages for an extended period,
but small enough so that other vCPUs aren't starved waiting for
mmu_lock.
This reverts commit 43d2b14b10.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
the tracepoint associated with said mechanism.
Note, the name of the tracepoint deviates from the original tracepoint
so as to match KVM's current nomenclature.
This reverts commit 42560fb1f3.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the fast invalidate mechanism has been reintroduced, restore
tracing of the generation number in shadow page tracepoints.
This reverts commit b59c4830ca.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the fast invalidate mechasim to zap MMIO sptes on a MMIO generation
wrap. The fast invalidate flow was reintroduced to fix a livelock bug
in kvm_mmu_zap_all() that can occur if kvm_mmu_zap_all() is invoked when
the guest has live vCPUs. I.e. using kvm_mmu_zap_all() to handle the
MMIO generation wrap is theoretically susceptible to the livelock bug.
This effectively reverts commit 4771450c34 ("Revert "KVM: MMU: drop
kvm_mmu_zap_mmio_sptes""), i.e. restores the behavior of commit
a8eca9dcc6 ("KVM: MMU: drop kvm_mmu_zap_mmio_sptes").
Note, this actually fixes commit 571c5af06e ("KVM: x86/mmu:
Voluntarily reschedule as needed when zapping MMIO sptes"), but there
is no need to incrementally revert back to using fast invalidate, e.g.
doing so doesn't provide any bisection or stability benefits.
Fixes: 571c5af06e ("KVM: x86/mmu: Voluntarily reschedule as needed when zapping MMIO sptes")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat invalid shadow pages as obsolete to fix a bug where an obsolete
and invalid page with a non-zero root count could become non-obsolete
due to mmu_valid_gen wrapping. The bug is largely theoretical with the
current code base, as an unsigned long will effectively never wrap on
64-bit KVM, and userspace would have to deliberately stall a vCPU in
order to keep an obsolete invalid page on the active list while
simultaneously modifying memslots billions of times to trigger a wrap.
The obvious alternative is to use a 64-bit value for mmu_valid_gen,
but it's actually desirable to go in the opposite direction, i.e. using
a smaller 8-bit value to reduce KVM's memory footprint by 8 bytes per
shadow page, and relying on proper treatment of invalid pages instead of
preventing the generation from wrapping.
Note, "Fixes" points at a commit that was at one point reverted, but has
since been restored.
Fixes: 5304b8d37c ("KVM: MMU: fast invalidate all pages")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Filter out drastic fluctuation and random fluctuation, remove
timer_advance_adjust_done altogether, the adjustment would be
continuous.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the latest Intel 64 and IA-32 Architectures Software Developer's
Manual, UMWAIT and TPAUSE instructions cause a VM exit if the
RDTSC exiting and enable user wait and pause VM-execution
controls are both 1.
Because KVM never enable RDTSC exiting, the vm-exit for UMWAIT and TPAUSE
should never happen. Considering EXIT_REASON_XSAVES and
EXIT_REASON_XRSTORS is also unexpected VM-exit for KVM. Introduce a common
exit helper handle_unexpected_vmexit() to handle these unexpected VM-exit.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UMWAIT and TPAUSE instructions use 32bit IA32_UMWAIT_CONTROL at MSR index
E1H to determines the maximum time in TSC-quanta that the processor can
reside in either C0.1 or C0.2.
This patch emulates MSR IA32_UMWAIT_CONTROL in guest and differentiate
IA32_UMWAIT_CONTROL between host and guest. The variable
mwait_control_cached in arch/x86/kernel/cpu/umwait.c caches the MSR value,
so this patch uses it to avoid frequently rdmsr of IA32_UMWAIT_CONTROL.
Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UMONITOR, UMWAIT and TPAUSE are a set of user wait instructions.
This patch adds support for user wait instructions in KVM. Availability
of the user wait instructions is indicated by the presence of the CPUID
feature flag WAITPKG CPUID.0x07.0x0:ECX[5]. User wait instructions may
be executed at any privilege level, and use 32bit IA32_UMWAIT_CONTROL MSR
to set the maximum time.
The behavior of user wait instructions in VMX non-root operation is
determined first by the setting of the "enable user wait and pause"
secondary processor-based VM-execution control bit 26.
If the VM-execution control is 0, UMONITOR/UMWAIT/TPAUSE cause
an invalid-opcode exception (#UD).
If the VM-execution control is 1, treatment is based on the
setting of the “RDTSC exiting†VM-execution control. Because KVM never
enables RDTSC exiting, if the instruction causes a delay, the amount of
time delayed is called here the physical delay. The physical delay is
first computed by determining the virtual delay. If
IA32_UMWAIT_CONTROL[31:2] is zero, the virtual delay is the value in
EDX:EAX minus the value that RDTSC would return; if
IA32_UMWAIT_CONTROL[31:2] is not zero, the virtual delay is the minimum
of that difference and AND(IA32_UMWAIT_CONTROL,FFFFFFFCH).
Because umwait and tpause can put a (psysical) CPU into a power saving
state, by default we dont't expose it to kvm and enable it only when
guest CPUID has it.
Detailed information about user wait instructions can be found in the
latest Intel 64 and IA-32 Architectures Software Developer's Manual.
Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the intended usage of each emulation type as each exists to
handle an edge case of one kind or another and can be easily
misinterpreted at first glance.
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX's EPT misconfig flow to handle fast-MMIO path falls back to decoding
the instruction to determine the instruction length when running as a
guest (Hyper-V doesn't fill VMCS.VM_EXIT_INSTRUCTION_LEN because it's
technically not defined for EPT misconfigs). Rather than implement the
slow skip in VMX's generic skip_emulated_instruction(),
handle_ept_misconfig() directly calls kvm_emulate_instruction() with
EMULTYPE_SKIP, which intentionally doesn't do single-step detection, and
so handle_ept_misconfig() misses a single-step #DB.
Rework the EPT misconfig fallback case to route it through
kvm_skip_emulated_instruction() so that single-step #DBs and interrupt
shadow updates are handled automatically. I.e. make VMX's slow skip
logic match SVM's and have the SVM flow not intentionally avoid the
shadow update.
Alternatively, the handle_ept_misconfig() could manually handle single-
step detection, but that results in EMULTYPE_SKIP having split logic for
the interrupt shadow vs. single-step #DBs, and split emulator logic is
largely what led to this mess in the first place.
Modifying SVM to mirror VMX flow isn't really an option as SVM's case
isn't limited to a specific exit reason, i.e. handling the slow skip in
skip_emulated_instruction() is mandatory for all intents and purposes.
Drop VMX's skip_emulated_instruction() wrapper since it can now fail,
and instead WARN if it fails unexpectedly, e.g. if exit_reason somehow
becomes corrupted.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: d391f12070 ("x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deferring emulation failure handling (in some cases) to the caller of
x86_emulate_instruction() has proven fragile, e.g. multiple instances of
KVM not setting run->exit_reason on EMULATE_FAIL, largely due to it
being difficult to discern what emulation types can return what result,
and which combination of types and results are handled where.
Now that x86_emulate_instruction() always handles emulation failure,
i.e. EMULATION_FAIL is only referenced in callers, remove the
emulation_result enums entirely. Per KVM's existing exit handling
conventions, return '0' and '1' for "exit to userspace" and "resume
guest" respectively. Doing so cleans up many callers, e.g. they can
return kvm_emulate_instruction() directly instead of having to interpret
its result.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that EMULATE_FAIL is completely unused, remove the last remaning
usage where KVM does something functional in response to EMULATE_FAIL.
Leave the check in place as a WARN_ON_ONCE to provide a better paper
trail when EMULATE_{DONE,FAIL,USER_EXIT} are completely removed.
Opportunistically remove the gotos in handle_invalid_guest_state().
With the EMULATE_FAIL handling gone there is no need to have a common
handler for emulation failure and the gotos only complicate things,
e.g. the signal_pending() check always returns '1', but this is far
from obvious when glancing through the code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Request triple fault in kvm_inject_realmode_interrupt() instead of
returning EMULATE_FAIL and deferring to the caller. All existing
callers request triple fault and it's highly unlikely Real Mode is
going to acquire new features. While this consolidates a small amount
of code, the real goal is to remove the last reference to EMULATE_FAIL.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the reporting of emulation failure into kvm_task_switch()
so that it can return EMULATE_USER_EXIT. This helps pave the way for
removing EMULATE_FAIL altogether.
This also fixes a theoretical bug where task switch interception could
suppress an EMULATE_USER_EXIT return.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kill a few birds with one stone by forcing an exit to userspace on skip
emulation failure. This removes a reference to EMULATE_FAIL, fixes a
bug in handle_ept_misconfig() where it would exit to userspace without
setting run->exit_reason, and fixes a theoretical bug in SVM's
task_switch_interception() where it would overwrite run->exit_reason on
a return of EMULATE_USER_EXIT.
Note, this technically doesn't fully fix task_switch_interception()
as it now incorrectly handles EMULATE_FAIL, but in practice there is no
bug as EMULATE_FAIL will never be returned for EMULTYPE_SKIP.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Immediately inject a #UD and return EMULATE done if emulation fails when
handling an intercepted #UD. This helps pave the way for removing
EMULATE_FAIL altogether.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an explicit emulation type for forced #UD emulation and use it to
detect that KVM should unconditionally inject a #UD instead of falling
into its standard emulation failure handling.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Immediately inject a #GP when VMware emulation fails and return
EMULATE_DONE instead of propagating EMULATE_FAIL up the stack. This
helps pave the way for removing EMULATE_FAIL altogether.
Rename EMULTYPE_VMWARE to EMULTYPE_VMWARE_GP to document that the x86
emulator is called to handle VMware #GP interception, e.g. why a #GP
is injected on emulation failure for EMULTYPE_VMWARE_GP.
Drop EMULTYPE_NO_UD_ON_FAIL as a standalone type. The "no #UD on fail"
is used only in the VMWare case and is obsoleted by having the emulator
itself reinject #GP.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VMware backdoor hooks #GP faults on IN{S}, OUT{S}, and RDPMC, none
of which generate a non-zero error code for their #GP. Re-injecting #GP
instead of attempting emulation on a non-zero error code will allow a
future patch to move #GP injection (for emulation failure) into
kvm_emulate_instruction() without having to plumb in the error code.
Reviewed-and-tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the single-step emulation result directly instead of via an out
param. Presumably at some point in the past kvm_vcpu_do_singlestep()
could be called with *r==EMULATE_USER_EXIT, but that is no longer the
case, i.e. all callers are happy to overwrite their own return variable.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When handling emulation failure, return the emulation result directly
instead of capturing it in a local variable. Future patches will move
additional cases into handle_emulation_failure(), clean up the cruft
before so there isn't an ugly mix of setting a local variable and
returning directly.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the stat.mmio_exits update into x86_emulate_instruction(). This is
both a bug fix, e.g. the current update flows will incorrectly increment
mmio_exits on emulation failure, and a preparatory change to set the
stage for eliminating EMULATE_DONE and company.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
