The MAX_LOW_POINT macro should reflect the maximum low point within
hardware. Otherwise, sampling for the hardware points from the output
transfer function (OTF) will be incorrect.
Also, fix usage of MAX_LOW_POINT accordingly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This path fixed specific eDP panel cold boot black screen
due to unnecessary enable link.
Change:
In case of boot up with eDP, if OS is going to set mode
on eDP, keep eDP light up, do not disable and reset corresponding
HW.
This change may affect dce asics and S3/S4 Resume with multi-monitor.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver passes GRAPHICS_CSC_ADJUST_TYPE_SW of type enum
graphics_csc_adjust_type to program_color_matrix(), however the function
expects a parameter of type enum grph_color_adjust_option. Supposedly
the intention was to pass GRPH_COLOR_MATRIX_SW, which has the same value
as GRAPHICS_CSC_ADJUST_TYPE_SW, so the mismatch didn't cause any trouble.
Pass GRPH_COLOR_MATRIX_SW to program_color_matrix() instead of
GRAPHICS_CSC_ADJUST_TYPE_SW, this also fixes the following warning when
building the kernel with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1129:24:
error: implicit conversion from enumeration type
'enum graphics_csc_adjust_type' to different enumeration type
'enum grph_color_adjust_option' [-Werror,-Wenum-conversion]
xfm_dce, tbl_entry, GRAPHICS_CSC_ADJUST_TYPE_SW);
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several optimizations:
1) Use predefined SRGB, don't calculate. This is the most common case.
2) Precompute HW X points at boot since they're fixed in ColModule
3) Precompute PQ - it never changes and is very CPU intensive in fixed pt.
4) Reduce number of points in ColModule to 512 (32x16) from 1024. This also
requires reducing some regions for legacy DCEs to 16 pts at most.
Performance
1) is super-fast, build_output_tf is 1-2us, down from 25000-30000.
Programming also fast since only one reg write.
2)+3) gives build_output_tf for PQ in ~100us range, down from ~80000-110000
2) + 4) results in slightly over 50% improvement. It gives an idea of the
savings when we can't use SRGB or PQ table (e.g. sdr white level > 80).
There's also a bit of refactoring: renaming some stuff that was misleading
and removing a lot of magic numbers that novices might not be able to
understand where they come from and what they mean.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing null-deref on Vega10 due to regression after
'fix cursor related Pstate hang' change.
Added null checks in setting cursor position.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK
If graphics plane go from 1 pipe to hsplit, the cursor updates
after mpc programming and unlock. Which means there is a window
of time where cursor is enabled on the wrong pipe if it's on
the right side of the screen (i.e. case where cursor need to
move from pipe 0 to pipe 3 post split). This will cause pstate hang.
Solution is to program the cursor while still locked.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use tg count in resource pool for further reference.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the timing generator hooks for configure_crc and get_crc.
Also implement is_tg_enabled, as configure_crc uses it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing regression introduced by
'Use real BE and FE index to program regs.'
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We no longer change the plane state pointer for full updates, and as
such, we weren't setting the input transfer function and programming the
degamma registers when we are supposed to. Check for a full update, an
input TF change, or a gamma change in the update flags instead to correct
this.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of some pipes are fused, pipe_idx should not
be used to program pipe regs. Instead of that, BE and FE
inst number should be used for reg index.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Proper sequence should be:
disable backlight
dp blank
disable output
edp power off
In enable accelatate mode, all the encoder and controller
are disabled, so move disable eDP to the function is the
easiest way to implement.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With FBC enabled there was a potential null-deref
on topology change due to hardcorded pipe index.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows Maximus emulation to more closely mirror actual silicon
execution.
* Enable pool->base.display_clock creation on Maximus.
* Enable rest of dce110_apply_ctx_to_hw on Maximus.
* Remove apply_ctx_to_hw_fpga (no longer necessary with the full
dce110_apply_ctx_to_hw enabled).
* Disable the dmcu->funcs->set_psr_wait_loop call in dce112_set_clock
for Maximus (this was the only fix-up necessary after enabling
dce110_apply_ctx_to_hw; everything else works unmodified on
Maximus).
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
validate_fbc never fails a modeset. It's simply used to decide whether
to use FBC or not. Calling it validate_fbc might be confusing to some so
rename it to should_enable_fbc.
With that let's also remove the DC_STATUS return code and return bool
and make enable_fbc a void function since we never check it's return
value and probably never want to anyways.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already check this a couple lines earlier.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It may take over 200ms for wait hpd ready. To optimize the resume time,
we can power on eDP in init_hw, wait for hpd ready when doing link
training.
also create separate eDP enable function to make sure eDP is powered up
before doing and DPCD access, as HPD low will result in DPDC transaction
failure.
After optimization,
setpowerstate 145ms -> 9.8ms,
DPMS 387ms -> 18.9ms
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->stream and pipe_ctx->plane_state are never NULL
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2111
set_default_colors() error: we previously assumed 'pipe_ctx->stream'
could be null (see line 2101)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane_res.mi (memory interface) can never be NULL for DCE110
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2881
dce110_apply_ctx_for_surface() error: we previously assumed
'pipe_ctx->plane_res.mi' could be null (see line 2873)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These files were missing it before.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing license text.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move update_plane_addr to apply_ctx_for_surface, address update will
just be called once, not twice for updat type is full and medium.
This will reduce some reg access and duration time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable swap.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
also simplifying syntax and removing unused variable in
dce110_apply_ctx_for_surface()
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power on one plane after disable all the planes, for
a hw bug work around to resolve stutter efficiency issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arr_points[1] and [2] were duplicated. Remove the extra
one. If we ever need more points we can add them but the
current state of affairs is confusing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU can future lower voltages in long idle case when all display is off.
If all display output is turned off via DPMS, send display_count = 0
after all output are turned off.
otherwise send display_count msg before turning on display to make sure
SMU exit S0i2 state. before is not neccessary as we are out of S0i2
when driver execute code, but send message before anyways for correctness.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to align with kernel coding style and make it a bit more
readable.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are different code to disable front end, it is
difficult to debug and adding new process.
This refactor makes all disable front end call the same
functions.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_link is at a higher level than link_encoder, and we only want
higher-level components to be able to access lower-level ones,
not the other way around.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This feature synchronizes multiple displays with various timings
to a display with the highest refresh rate
it is enabled if edid caps flag multi_display_sync is set to one
There are limitations on refresh rates allowed
that can be synchronized. That would
prevent from underflow and other potential
corruptions.
Multi display synchronization is using the
same functions as timing_sync in order to minimize
redunduncy and decision to disable synchronization is
based on trigger parametre set in DM
Feature is developed for DCN1 and DCE11
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to move HDR Metadata from Surface to Stream since there is only one
infoframe possible per stream.
Also cleaning up some duplicate definitions.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Moved lock and unlock to apply_ctx_to_surface, since all
the front end programming is within apply_ctx_to_surface.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some features should only be enabled on APUs or should not
be enabled on APUs.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
