376 Commits

Author	SHA1	Message	Date
Heikki Krogerus	d2d2e3c46b	acpi: Add helper for deactivating memory region ... Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf441 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2018-06-25 21:30:12 +08:00
Linus Torvalds	410feb75de	arm64 updates for 4.18: ... - Spectre v4 mitigation (Speculative Store Bypass Disable) support for arm64 using SMC firmware call to set a hardware chicken bit - ACPI PPTT (Processor Properties Topology Table) parsing support and enable the feature for arm64 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The primary motivation is Scalable Vector Extensions which requires more space on the signal frame than the currently defined MINSIGSTKSZ - ARM perf patches: allow building arm-cci as module, demote dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups - cmpwait() WFE optimisation to avoid some spurious wakeups - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have to do with some network allocations) while keeping ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual hardware Cache Writeback Granule - Turn LSE atomics on by default in Kconfig - Kernel fault reporting tidying - Some #include and miscellaneous cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlsaoqsACgkQa9axLQDI XvH+8RAAqRCrEtkNPS7zxHyMK/D2cxSy9EVtlJ1sxhmsONEe5t5MDTWX9byobQ5A PAKMSQBQgUvecqHLOtD7SJWef1il30zgWmc/yPcgNv3OsA1Au7j2g3ht/Drw+N5I Vy0aOUEtw+Jzs7y/CJyl6lufSkkOzszOujt2Nybiz6omztOrwkW9isKnURzQBNj5 gquZI35h604YJ9F0TqS6ZqU7tNcuB9q02FxvVBpLmb83jP4jSEjYACUJwVVxvEAB UXjdD4N130rRXDS5OMRWo5+4SAj+kPYhdVYEvaDx7xTOIRHhXK05GlJbsUAc5E6l xy810fH5Dm0diYpVvYWTA5J+BU1jNOvCys5zKWl7gs2P8YB59PdqY4M2YBPNGb5H PaVgq73TZAsww6ZInbZlK+wZOIxZZIOf//Z+QKn6EPtu3RmzIFWwyttTj01w1E3i LhjcUoGnvxJFcMoCr59ihDwfP9nkCVrNc4REOGaWDk6L/t/bOfaZfDz+OCGbwQdL akCFKZI6q5O/no+YfhtdtNFpCQb/Bo1J88KuotICRXq8z4vO41zIG53bi97W8QeG rCBiX0NxUxYJ3ybus7kZHTmMGieMyEHP28n12QffwvJj4vJBsUXQBrV8hclx0djZ HMt7iPi/0BW6nVV7ngIgN3cdCpaDCEGRsfO4Ch0rFZrC9UbYQnE= =uums -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from the core arm64 and perf changes, the Spectre v4 mitigation touches the arm KVM code and the ACPI PPTT support touches drivers/ (acpi and cacheinfo). I should have the maintainers' acks in place. Summary: - Spectre v4 mitigation (Speculative Store Bypass Disable) support for arm64 using SMC firmware call to set a hardware chicken bit - ACPI PPTT (Processor Properties Topology Table) parsing support and enable the feature for arm64 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The primary motivation is Scalable Vector Extensions which requires more space on the signal frame than the currently defined MINSIGSTKSZ - ARM perf patches: allow building arm-cci as module, demote dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups - cmpwait() WFE optimisation to avoid some spurious wakeups - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have to do with some network allocations) while keeping ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual hardware Cache Writeback Granule - Turn LSE atomics on by default in Kconfig - Kernel fault reporting tidying - Some #include and miscellaneous cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits) arm64: Fix syscall restarting around signal suppressed by tracer arm64: topology: Avoid checking numa mask for scheduler MC selection ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled arm64: cpu_errata: include required headers arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file arm64: signal: Report signal frame size to userspace via auxv arm64/sve: Thin out initialisation sanity-checks for sve_max_vl arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests arm64: KVM: Add ARCH_WORKAROUND_2 support for guests arm64: KVM: Add HYP per-cpu accessors arm64: ssbd: Add prctl interface for per-thread mitigation arm64: ssbd: Introduce thread flag to control userspace mitigation arm64: ssbd: Restore mitigation status on CPU resume arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation arm64: ssbd: Add global mitigation state accessor arm64: Add 'ssbd' command-line option arm64: Add ARCH_WORKAROUND_2 probing arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2 arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 ...	2018-06-08 11:10:58 -07:00
Linus Torvalds	3a3869f1c4	pci-v4.18-changes ... -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+ v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa 46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R kpJ1VPTKK1XN64I= =aFAi -----END PGP SIGNATURE----- Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...	2018-06-07 12:45:58 -07:00
Linus Torvalds	f4fe74cc90	ACPI updates for 4.18-rc1 ... These update the ACPICA code in the kernel to the 20180508 upstream revision and make it support the RT patch, add CPPC v3 support to the ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes with the RTC, add quirks to the ACPI AC and battery drivers, and update the ACPI SoC drivers. Specifics: - Update the ACPICA code in the kernel to the 20180508 upstream revision including: * iASL -tc option enhancement (Bob Moore). * Debugger improvements (Bob Moore). * Support for tables larger than 1 MB in acpidump/acpixtract (Bob Moore). * Minor fixes and cleanups (Colin Ian King, Toomas Soome). - Make the ACPICA code in the kernel support the RT patch (Sebastian Andrzej Siewior, Steven Rostedt). - Add a kmemleak annotation to the ACPICA code (Larry Finger). - Add CPPC v3 support to the ACPI CPPC library and fix two issues related to CPPC (Prashanth Prakash, Al Stone). - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems where WDAT clashes with the RTC SRAM (Mika Westerberg). - Add some quirks to the ACPI AC and battery drivers (Carlo Caione, Hans de Goede). - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD) platforms (Akshu Agrawal, Hans de Goede). - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu Malaterre). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJbFR2IAAoJEILEb/54YlRxsEcP/0vxyGvTXUnHH13h1ayhbcEL qKA//1Zvw55mFb86nlnIVWUfpVx5pN4sOd2MZL2bDmNP8+ZX1QFbwtkpP8MtnRyX 0pmPb2QpmHz/ZHutVg3rGxFOV4Sk0IPevQW7d4eu/Gc6K/UkfREMj10PWu9EoNWm 6UCKuONxeoUAtE/OTfvU33ghpYgBH506Kg6/EwLLRX0tA10NBa11L9ijUEkVfa0s RDn5Z9ndjGGed4XtlSNkfabEJpc6uX9JvbAw77DKZgyqEZgQyNa4CZ2C1ZtH66lZ HCS62eJ6ePGUvzW/KTn825+MOGni5YisGlfonHuF9xHpPNSp7Doxmyny3lMYHL7S l0XdI2G7UIOFO5eaRM/zYQPQyF05lna28MVvTWJWBA3bcUz4rav9fzPKYp5l+To0 xK1Ol84sowlkOKoi/RIcOx5nsh05SufGqNu9RuXjRZ4iK0bJPCD3YNt+tH95b94M 0YOuoDkIylieVET4xgHB5vBOj8EgMOLtSaGSpEbh816i+BdZMx7YnS4xSmQ+JFjd rVCJMnXcLZ82j3pkvPpR0W3VLVbEJPjLftENjSVJ+vA9lR567byBFrvzTEmsEQoi KlNWh5qDmoR96dPheLdhD1HtsL070xLhyqYOUDvtqTiVH8uNxoWfQzcSfvXPvLqc XGCcG/oPP9FFpNZfLzAB =FAIF -----END PGP SIGNATURE----- Merge tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the 20180508 upstream revision and make it support the RT patch, add CPPC v3 support to the ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes with the RTC, add quirks to the ACPI AC and battery drivers, and update the ACPI SoC drivers. Specifics: - Update the ACPICA code in the kernel to the 20180508 upstream revision including: * iASL -tc option enhancement (Bob Moore). * Debugger improvements (Bob Moore). * Support for tables larger than 1 MB in acpidump/acpixtract (Bob Moore). * Minor fixes and cleanups (Colin Ian King, Toomas Soome). - Make the ACPICA code in the kernel support the RT patch (Sebastian Andrzej Siewior, Steven Rostedt). - Add a kmemleak annotation to the ACPICA code (Larry Finger). - Add CPPC v3 support to the ACPI CPPC library and fix two issues related to CPPC (Prashanth Prakash, Al Stone). - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems where WDAT clashes with the RTC SRAM (Mika Westerberg). - Add some quirks to the ACPI AC and battery drivers (Carlo Caione, Hans de Goede). - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD) platforms (Akshu Agrawal, Hans de Goede). - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu Malaterre)" * tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPICA: Update version to 20180508 ACPICA: acpidump/acpixtract: Support for tables larger than 1MB ACPI: APD: Add AMD misc clock handler support clk: x86: Add ST oscout platform clock ACPICA: Update version to 20180427 ACPICA: Debugger: Removed direct support for EC address space in "Test Objects" ACPICA: Debugger: Add Package support for "test objects" command ACPICA: Improve error messages for the namespace root node ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list ACPICA: vsnprintf: this statement may fall through ACPICA: Tables: Fix spelling mistake in comment ACPICA: iASL: Enhance the -tc option (create AML hex file in C) ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI / tables: improve comments regarding acpi_parse_entries_array() ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock ACPICA: provide abstraction for raw_spinlock_t ACPI / CPPC: Fix invalid PCC channel status errors ...	2018-06-05 10:08:27 -07:00
Sudeep Holla	2520e627db	ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled ... Though CONFIG_ACPI_PPTT is selected by platforms and nor user visible, it may be useful to support the build with CONFIG_ACPI_PPTT disabled. This patch adds the missing dummy/boiler plate implementation to fix the build. Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2018-06-05 18:06:24 +01:00
Jeremy Linton	2bd00bcd73	ACPI/PPTT: Add Processor Properties Topology Table parsing ... ACPI 6.2 adds a new table, which describes how processing units are related to each other in tree like fashion. Caches are also sprinkled throughout the tree and describe the properties of the caches in relation to other caches and processing units. Add the code to parse the cache hierarchy and report the total number of levels of cache for a given core using acpi_find_last_cache_level() as well as fill out the individual cores cache information with cache_setup_acpi() once the cpu_cacheinfo structure has been populated by the arch specific code. An additional patch later in the set adds the ability to report peers in the topology using find_acpi_cpu_topology() to report a unique ID for each processing unit at a given level in the tree. These unique id's can then be used to match related processing units which exist as threads, within a given package, etc. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Vijaya Kumar K <vkilari@codeaurora.org> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2018-05-17 17:28:09 +01:00
Ulf Hansson	919b7308fc	PM / Domains: Allow a better error handling of dev_pm_domain_attach() ... The callers of dev_pm_domain_attach() currently checks the returned error code for -EPROBE_DEFER and needs to ignore other error codes. This is an unnecessary limitation, which also leads to a rather strange behaviour in the error path. Address this limitation, by changing the return codes from acpi_dev_pm_attach() and genpd_dev_pm_attach(). More precisely, let them return 0, when no PM domain is needed for the device and then return 1, in case the device was successfully attached to its PM domain. In this way, dev_pm_domain_attach(), gets a better understanding of what happens in the attach attempts and also allowing its caller to better act on real errors codes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-05-14 22:58:44 +02:00
Mathieu Malaterre	63fab6977a	ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ... In commit e7ff3a4763 (x86/amd: Check for the C1E bug post ACPI subsystem init) a new function arch_post_acpi_subsys_init() was introduced. This weak function can potentially be overridden on a per arch basis, introduce the prototype for clarity. Silence the following gcc warning (W=1): init/main.c:484:20: warning: no previous prototype for ‘arch_post_acpi_subsys_init’ [-Wmissing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-05-13 11:17:13 +02:00
Bjorn Helgaas	af8bb9f898	PCI/ACPI: Request LTR control from platform before using it ... Per the PCI Firmware spec r3.2, sec 4.5, an ACPI-based OS should use _OSC to request control of Latency Tolerance Reporting (LTR) before using it. Request control of LTR, and if the platform does not grant control, don't use it. N.B. If the hardware supports LTR and the ASPM L1.2 substate but the BIOS doesn't support LTR in _OSC, we previously would enable ASPM L1.2. This patch will prevent us from enabling ASPM L1.2 in that case. It does not prevent us from enabling PCI-PM L1.2, since that doesn't depend on LTR. See PCIe r40, sec 5.5.1, for the L1 PM substate entry conditions. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-04-23 08:18:44 -05:00
Juergen Gross	dfc9327ab7	acpi: Introduce acpi_arch_get_root_pointer() for getting rsdp address ... Add an architecture specific function to get the address of the RSDP table. Per default it will just return 0 indicating falling back to the current mechanism. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20180219100906.14265-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2018-02-26 08:43:20 +01:00
Andy Shevchenko	67dcc26d20	device property: Constify device_get_match_data() ... Constify device_get_match_data() as OF and ACPI variants return constant value. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-02-12 10:41:11 +01:00
Andy Shevchenko	29d5325a14	ACPI / bus: Rename acpi_get_match_data() to acpi_device_get_match_data() ... Do the renaming to be consistent with its sibling, i.e. of_device_get_match_data(). No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-02-12 10:41:10 +01:00
Linus Torvalds	54ce685cae	More ACPI updates for v4.16-rc1 ... - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim). * Support for X32 ABI compilation (Anuj Mittal). * Update of ACPICA copyrights to 2018 (Bob Moore). - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede). - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam). - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang). - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng). - Address static checker warnings in the CPPC code (Gustavo Silva). - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJafGvJAAoJEILEb/54YlRxiusQAKUa+OM/oxTJkOEfGGRM8NlS Hq/PaL/TnAj3nCoZN9fM38mI4gkxqu3eVMv6kfiqRe8VYmUX9r9tRbQ9kxvEYa7n s6Dl+wdC9UND20QJkYVzPlaXbPuZyLFHt4Fkb1hp+HAGgNNYqc4e0lJvI82F2pdo im1UFI84jg9UQV4WpUJL6ny2c/RMNtpUV5fOKFD8lkvBvVe7mtZTZ+1nZDeqXGkV jzdrVTHLUEDhjS1o0TBmEsJGNeGOqnK/f+m8Rq4397guPAQQq18MYNC68SzhuGjP iqhvIvI9sF197i66l/qgsubBifOV4At8Wb0LA5cU8CQLLpEW8GDktz/kucVHyzJ4 cVKuPXptBwwtPbNFHWO8reTUFMAnP7IpjtC31ntr6xWRQCiXv0/i2hRRN54g9T7e FAOBmmys5DKFOq50OB5WdD3/Qz5OUuVgdbrSxNFARIZpQFtUn7Np2/nmNpPgrrcl 77hO8dpeXUTVvM4HpRQN1+r0KOTLfTAvWV7LYLAjCF9ivc0Vop/tYZQ2VEMSUEFD SGKC30mGC4pphAjxcSYV282JR7Jx7arQ71ZA5uYTRRuxnEQd/2MC71fNjrFmCgUW 1Pumw0Pw6eZRjj1FZ/pj0X5lm7AlZj0dVzsJFgNb0FcJW0nOhN3czQrA4igoSVng B2sRv9U8YDnDtzHyTPrY =rVdp -----END PGP SIGNATURE----- Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value	2018-02-09 09:44:25 -08:00
Prarit Bhargava	0231d00082	ACPI: SPCR: Make SPCR available to x86 ... SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup an early console. General fixes include updating Documentation & Kconfig (for x86), updating comments, and changing parse_spcr() to acpi_parse_spcr(), and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be more descriptive. On x86, many systems have a valid SPCR table but the table version is not 2 so the table version check must be a warning. On ARM64 when the kernel parameter earlycon is used both the early console and console are enabled. On x86, only the earlycon should be enabled by by default. Modify acpi_parse_spcr() to allow options for initializing the early console and console separately. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-02-07 11:39:58 +01:00
Linus Torvalds	b2fe5fa686	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ... Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...	2018-01-31 14:31:10 -08:00
Linus Torvalds	9798f5178f	The is the bulk of GPIO changes for the v4.16 kernel cycle. ... Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJacIW6AAoJEEEQszewGV1z9b0P/jxWKaCAGFTTu/HZQ79RBAFq w33nIazzoh+88sN7A9xKexpr4ibOxiCvOwkTtrUBNaxGGy5fslj4+OY5BzunEfBK 1vYxyEqtenvvZK03pOd6CSfHKV+vD5ngnVHGdtGzRvtmDDiSgtzqyEyUhQcXM+l7 PrEh6qrd4TBZezlVR8kn5eqcmclkCBVSQCuLSq+ThMmCKRZuOdf1Im3D6eBzh1/N P81HdcglqbSsfUl1RcFiHs9Z+KcZOq83CNl2Ej1LePK2JBZbmkx9dR+WSJmV1u4P 6wvzFcQDhfGEiiteg2BS5c+o6aAyShpuRNut+2MLre8icmdfpqUEqFotHbfQjW5y sqaejGsJ5aHcRBq7UUM+F9s1R0iN3tlafi3L0WEhl0Tn5huRQq3Uqcw6e5l+XrWd 0h+b5PbKJZO/iqzRhSl+rhc0V2CFDJOCwvY+JX6356fvrcF0T6LhvKfDYtKU3Iyb HB0RG1OcYe228f96azvafCkFyBIYX9mqHBvOXpQQgrZQYXfN1rupLvpOhxC+Wbvn nsGE2bdD6HA1bytTbkxbL+QWP7faHf5YVcZpaN7UWbO3sOzL46fj8eHwHUim95Tr pR5kDZRhZd8+9SCNZ/ttpaEbis9MOqS/3Mlxrj4GXtfFFmR53hjFy2bG/Z7R2RB0 MlSEJRc8iDIs+1j3D2RR =k5nL -----END PGP SIGNATURE----- Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...	2018-01-31 12:25:27 -08:00
Linus Torvalds	2155e69a9d	DMAengine updates for v4.16-rc1 ... This cycle we have small update for: - updates to xilinx and zynqmp dma controllers - update reside calculation for rcar controller - more RSTify fixes for documentation - Add support for race free transfer termination and updating for users for that - Support for new rev of hidma with addition new APIs to get device match data in ACPI/OF - Random updates to bunch of other drivers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJacYHYAAoJEHwUBw8lI4NHWc0P/0oMfdJXSCPbg/Sm/VrTwMR8 QvWbVxkOdeG/2L4JQYqzuHI1fWFjWV/bCdMqugTfoCs1HGr/JIEcUntM2WLIwCu6 lF8MjULfOiUieE5SmRj3pvMEKCVYQKVjQpffFRnfnHA7gtU8wpgUYjm9I8dYeat9 R6JVnqpTL+yrSocjBOZ/PoQy4oboe3TiYH+SOVLZozLUu89+/52i0U+orPYpYXVu fu59x8J1YnFxTwNC7RhwTkp1TYW7zse/DtTWQxjJJfxzW+5Gove+VdhmJmfaOQDR mJrSzn+dPrFbR6IFs4+XE7ja/lZn5Sjs8vRWktC6/KKQrkUlxOYKDyuoLRwZGLEy hCLJo7FRt4n4jV25P4mJB1p9ePOHfzxSD/myXF6o81fX8haBJMr9SmSnWBeiYJpe ybz+AvYHn7sDW8WwHJzyuN4WJgDcSkWHqNzx2kjF1k3sYNYqMN4W94+9VIx6oxrI fucyry6dNAL9wYEfF8hlnH/3A3PKpWs4zE+trxrCnrj3hvzo3pTbhH+/fhqhR+Wk PRoD+yVTVZcPR2F9lysqDX26Rpbq6yHv5IqCyDjnwDuLqwF5yzIODgJ/glkQ1D+F bpzVN7BJyz0MMGSQX7ExMcw7PHgnycVW/rNBLVZ6QtBuc1BaYQHdqIpXqzwQr+4T 8ewXGx5EVqCyYVnDty4y =7bH/ -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This time is smallish update with updates mainly to drivers: - updates to xilinx and zynqmp dma controllers - update reside calculation for rcar controller - more RSTify fixes for documentation - add support for race free transfer termination and updating for users for that - support for new rev of hidma with addition new APIs to get device match data in ACPI/OF - random updates to bunch of other drivers" * tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits) dmaengine: dmatest: fix container_of member in dmatest_callback dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy' dmaengine: qcom_hidma: simplify DT resource parsing dmaengine: xilinx_dma: Free BD consistent memory dmaengine: xilinx_dma: Fix warning variable prev set but not used dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma dmaengine: doc: format struct fields using monospace dmaengine: doc: fix bullet list formatting dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 dmaengine: cppi41: Fix channel queues array size check dmaengine: imx-sdma: Add MODULE_FIRMWARE dmaengine: xilinx_dma: Fix typos dmaengine: xilinx_dma: Differentiate probe based on the ip type dmaengine: xilinx_dma: fix style issues from checkpatch dmaengine: xilinx_dma: Fix kernel doc warnings dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor dmaengine: zynqmp_dma: Fix race condition in the probe ...	2018-01-31 11:52:20 -08:00
Linus Torvalds	7f3fdd40a7	Power management updates for v4.16-rc1 ... - Define a PM driver flag allowing drivers to request that their devices be left in suspend after system-wide transitions to the working state if possible and add support for it to the PCI bus type and the ACPI PM domain (Rafael Wysocki). - Make the PM core carry out optimizations for devices with driver PM flags set in some cases and make a few drivers set those flags (Rafael Wysocki). - Fix and clean up wrapper routines allowing runtime PM device callbacks to be re-used for system-wide PM, change the generic power domains (genpd) framework to stop using those routines incorrectly and fix up a driver depending on that behavior of genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven). - Fix and clean up the PM core's device wakeup framework and re-factor system-wide PM core code related to device wakeup (Rafael Wysocki, Ulf Hansson, Brian Norris). - Make more x86-based systems use the Low Power Sleep S0 _DSM interface by default (to fix power button wakeup from suspend-to-idle on Surface Pro3) and add a kernel command line switch to tell it to ignore the system sleep blacklist in the ACPI core (Rafael Wysocki). - Fix a race condition related to cpufreq governor module removal and clean up the governor management code in the cpufreq core (Rafael Wysocki). - Drop the unused generic code related to the handling of the static power energy usage model in the CPU cooling thermal driver along with the corresponding documentation (Viresh Kumar). - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng). - Add a new operating point to the imx6ul and imx6q cpufreq drivers and switch the latter to using clk_bulk_get() (Anson Huang, Dong Aisheng). - Add support for multiple regulators to the TI cpufreq driver along with a new DT binding related to that and clean up that driver somewhat (Dave Gerlach). - Fix a powernv cpufreq driver regression leading to incorrect CPU frequency reporting, fix that driver to deal with non-continguous P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat). - Add support for frequency scaling on Armada 37xx SoCs through the generic DT cpufreq driver (Gregory CLEMENT). - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT). - Fix a transition delay setting regression in the longhaul cpufreq driver (Viresh Kumar). - Add Skylake X (server) support to the intel_pstate cpufreq driver and clean up that driver somewhat (Srinivas Pandruvada). - Clean up the cpufreq statistics collection code (Viresh Kumar). - Drop cluster terminology and dependency on physical_package_id from the PSCI driver and drop dependency on arm_big_little from the SCPI cpufreq driver (Sudeep Holla). - Add support for system-wide suspend and resume to the RAPL power capping driver and drop a redundant semicolon from it (Zhen Han, Luis de Bethencourt). - Make SPI domain validation (in the SCSI SPI transport driver) and system-wide suspend mutually exclusive as they rely on the same underlying mechanism and cannot be carried out at the same time (Bart Van Assche). - Fix the computation of the amount of memory to preallocate in the hibernation core and clean up one function in there (Rainer Fiebig, Kyungsik Lee). - Prepare the Operating Performance Points (OPP) framework for being used with power domains and clean up one function in it (Viresh Kumar, Wei Yongjun). - Clean up the generic sysfs interface for device PM (Andy Shevchenko). - Fix several minor issues in power management frameworks and clean them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven, Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker, Sergey Senozhatsky, gaurav jindal). - Make it easier to disable PM via Kconfig (Mark Brown). - Clean up the cpupower and intel_pstate_tracer utilities (Doug Smythies, Laura Abbott). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJaYw2iAAoJEILEb/54YlRxLHwP/iabmAcbXBeg30/wSCKcWB6f Ar785YbkFedNP7b2dypR7bcKIkaV55EExNHHoVuvC6gKrW+zx3F39v9QzK3HBKfw DgLWMjxR5Xdm9o8o2chsBEMl0itSRB9s864s+AAAElP+qjyT6kmbFyRFgVYLiNH0 v9jNhPF9EmirViwES/syELa/P1AJDMxCb/SbRY+Xp1sPhGKlx2J/2eQsVDs7G+wL 2BJeyBqwL9D78U/eY2bvpCoZLpmZmklx1eY5iK3Mzo6LZKYMaSypgkGuRfh//K+a 8vFLwOBsOlpZ8lsPBRatV5+SMu8qMQMTnstui1m3/9bOPFfjymat6u0lLw4BV2hv zrNfqWOiwTAt/fczR1/naYuuSeRCLABvYDKjs/9iYdrCZYJ+n+ZzU/wi5geswDtD cQKDMOdOBrnfkN0Vqpw6ZBqun0RDldNT/+6oy93tHWBlF0CA4mMq5jr8q3iH35CW 8TA1GCkurHZXTyYdYXR5SUHxPbOgZC87GAb7RlFEJJnvvkmy3jmBng675Hl5XAn7 D8eJp3d4h5n121pkMLGcBc7K036T2uFsjrHWx+QsjKFUBWUBnuRfInRrLA5WnGo2 U+KIEUPepdnbFFvYNv+kTgz2uE6FOqycEmnUKUKWUZYPN0GDAOw/V3813uxVRYtq 27omIOL7PJp1wWjQnfXK =dnb7 -----END PGP SIGNATURE----- Merge tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This includes some infrastructure changes in the PM core, mostly related to integration between runtime PM and system-wide suspend and hibernation, plus some driver changes depending on them and fixes for issues in that area which have become quite apparent recently. Also included are changes making more x86-based systems use the Low Power Sleep S0 _DSM interface by default, which turned out to be necessary to handle power button wakeups from suspend-to-idle on Surface Pro3. On the cpufreq front we have fixes and cleanups in the core, some new hardware support, driver updates and the removal of some unused code from the CPU cooling thermal driver. Apart from this, the Operating Performance Points (OPP) framework is prepared to be used with power domains in the future and there is a usual bunch of assorted fixes and cleanups. Specifics: - Define a PM driver flag allowing drivers to request that their devices be left in suspend after system-wide transitions to the working state if possible and add support for it to the PCI bus type and the ACPI PM domain (Rafael Wysocki). - Make the PM core carry out optimizations for devices with driver PM flags set in some cases and make a few drivers set those flags (Rafael Wysocki). - Fix and clean up wrapper routines allowing runtime PM device callbacks to be re-used for system-wide PM, change the generic power domains (genpd) framework to stop using those routines incorrectly and fix up a driver depending on that behavior of genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven). - Fix and clean up the PM core's device wakeup framework and re-factor system-wide PM core code related to device wakeup (Rafael Wysocki, Ulf Hansson, Brian Norris). - Make more x86-based systems use the Low Power Sleep S0 _DSM interface by default (to fix power button wakeup from suspend-to-idle on Surface Pro3) and add a kernel command line switch to tell it to ignore the system sleep blacklist in the ACPI core (Rafael Wysocki). - Fix a race condition related to cpufreq governor module removal and clean up the governor management code in the cpufreq core (Rafael Wysocki). - Drop the unused generic code related to the handling of the static power energy usage model in the CPU cooling thermal driver along with the corresponding documentation (Viresh Kumar). - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng). - Add a new operating point to the imx6ul and imx6q cpufreq drivers and switch the latter to using clk_bulk_get() (Anson Huang, Dong Aisheng). - Add support for multiple regulators to the TI cpufreq driver along with a new DT binding related to that and clean up that driver somewhat (Dave Gerlach). - Fix a powernv cpufreq driver regression leading to incorrect CPU frequency reporting, fix that driver to deal with non-continguous P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat). - Add support for frequency scaling on Armada 37xx SoCs through the generic DT cpufreq driver (Gregory CLEMENT). - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT). - Fix a transition delay setting regression in the longhaul cpufreq driver (Viresh Kumar). - Add Skylake X (server) support to the intel_pstate cpufreq driver and clean up that driver somewhat (Srinivas Pandruvada). - Clean up the cpufreq statistics collection code (Viresh Kumar). - Drop cluster terminology and dependency on physical_package_id from the PSCI driver and drop dependency on arm_big_little from the SCPI cpufreq driver (Sudeep Holla). - Add support for system-wide suspend and resume to the RAPL power capping driver and drop a redundant semicolon from it (Zhen Han, Luis de Bethencourt). - Make SPI domain validation (in the SCSI SPI transport driver) and system-wide suspend mutually exclusive as they rely on the same underlying mechanism and cannot be carried out at the same time (Bart Van Assche). - Fix the computation of the amount of memory to preallocate in the hibernation core and clean up one function in there (Rainer Fiebig, Kyungsik Lee). - Prepare the Operating Performance Points (OPP) framework for being used with power domains and clean up one function in it (Viresh Kumar, Wei Yongjun). - Clean up the generic sysfs interface for device PM (Andy Shevchenko). - Fix several minor issues in power management frameworks and clean them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven, Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker, Sergey Senozhatsky, gaurav jindal). - Make it easier to disable PM via Kconfig (Mark Brown). - Clean up the cpupower and intel_pstate_tracer utilities (Doug Smythies, Laura Abbott)" * tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) PCI / PM: Remove spurious semicolon cpufreq: scpi: remove arm_big_little dependency drivers: psci: remove cluster terminology and dependency on physical_package_id powercap: intel_rapl: Fix trailing semicolon dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / hibernate: Drop unused parameter of enough_swap PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume() cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin cpufreq: intel_pstate: Add Skylake servers support cpufreq: intel_pstate: Replace bxt_funcs with core_funcs platform/x86: surfacepro3: Support for wakeup from suspend-to-idle ACPI / PM: Use Low Power S0 Idle on more systems PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag powercap: add suspend and resume mechanism for SOC power limit ...	2018-01-29 09:47:41 -08:00
Marcin Wojtas	7c6c57f2ab	device property: Introduce fwnode_irq_get() ... Until now there were two very similar functions allowing to get Linux IRQ number from ACPI handle (acpi_irq_get()) and OF node (of_irq_get()). The first one appeared to be used only as a subroutine of platform_irq_get(), which (in the generic code) limited IRQ obtaining from _CRS method only to nodes associated to kernel's struct platform_device. This patch introduces a new helper routine - fwnode_irq_get(), which allows to get the IRQ number directly from the fwnode to be used as common for OF/ACPI worlds. It is usable not only for the parents fwnodes, but also for the child nodes comprising their own _CRS methods with interrupts description. In order to be able o satisfy compilation with !CONFIG_ACPI and also simplify the new code, introduce a helper macro (ACPI_HANDLE_FWNODE), with which it is possible to reach an ACPI handle directly from its fwnode. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>	2018-01-22 10:57:04 -05:00
Andy Shevchenko	67dcf8a3e0	ACPI: utils: Introduce acpi_dev_get_first_match_name() ... Sometimes the user wants to have device name of the match rather than just checking if device present or not. To make life easier for such users introduce acpi_dev_get_first_match_name() helper based on code for acpi_dev_present(). For example, GPIO driver for Intel Merrifield needs to know the device name of pin control to be able to apply GPIO mapping table to the proper device. To be more consistent with the purpose rename struct acpi_dev_present_info -> struct acpi_dev_match_info acpi_dev_present_cb() -> acpi_dev_match_cb() in the utils.c file. Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-01-10 00:41:43 +01:00
Sinan Kaya	80212a1623	ACPI / bus: Introduce acpi_get_match_data() function ... OF has of_device_get_match_data() function to extract driver specific data structure. Add a similar function for ACPI. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>	2017-12-13 14:10:57 +05:30
Andy Shevchenko	1b2ca32ab0	gpiolib: acpi: Introduce NO_RESTRICTION quirk ... Allow to relax IoRestriction for certain cases. One of the use case is incorrectly cooked ACPI table where interrupt pin is defined with GpioIo() macro with IoRestrictionOutputOnly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2017-11-30 10:53:52 +01:00
Andy Shevchenko	ce0929d222	gpiolib: acpi: Add quirks field to struct acpi_gpio_mapping ... Some broken ACPI tables might require quirks in the OS. Introduce quirks field in struct acpi_gpio_mapping. Propagate them to struct acpi_gpio_info for further use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2017-11-30 10:53:51 +01:00
Rafael J. Wysocki	57044031b0	ACPI / PM: Make it possible to ignore the system sleep blacklist ... The ACPI code supporting system transitions to sleep states uses an internal blacklist to apply special handling to some machines reported to behave incorrectly in some ways. However, some entries of that blacklist cover problematic as well as non-problematic systems, so give the users of the latter a chance to ignore the blacklist and run their systems in the default way by adding acpi_sleep=nobl to the kernel command line. For example, that allows the users of Dell XPS13 9360 systems not affected by the issue that caused the blacklist entry for this machine to be added by commit 71630b7a83 (ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360) to use suspend-to-idle with the Low Power S0 Idle _DSM interface which in principle should be more energy-efficient than S3 on them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-11-27 01:44:24 +01:00
Rafael J. Wysocki	05087360fd	ACPI / PM: Take SMART_SUSPEND driver flag into account ... Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in its system suspend callbacks. [Note that the pm_runtime_suspended() check in acpi_dev_needs_resume() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in acpi_subsys_suspend_late/noirq() and acpi_subsys_freeze_late/noirq(). Moreover, if acpi_subsys_resume_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state going forward, so add a check for that too in there. In turn, if acpi_subsys_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. On top of the above, make the analogous changes in the acpi_lpss driver that uses the ACPI PM domain callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-11-06 13:57:47 +01:00
Rafael J. Wysocki	cbe25ce37d	ACPI / PM: Combine device suspend routines ... On top of a previous change getting rid of the PM QoS flag PM_QOS_FLAG_REMOTE_WAKEUP, combine two ACPI device suspend routines, acpi_dev_runtime_suspend() and acpi_dev_suspend_late(), into one, acpi_dev_suspend(), to eliminate some code duplication. It also avoids enabling wakeup for devices handled by the ACPI LPSS middle layer on driver removal. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>	2017-10-17 00:30:03 +02:00
Srinivas Pandruvada	eeb2d80d50	ACPI / LPIT: Add Low Power Idle Table (LPIT) support ... Add functionality to read LPIT table, which provides: - Sysfs interface to read residency counters via /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us Here the count "low_power_idle_cpu_residency_us" shows the time spent by CPU package in low power state. This is read via MSR interface, which points to MSR for PKG C10. Here the count "low_power_idle_system_residency_us" show the count the system was in low power state. This is read via MMIO interface. This is mapped to SLP_S0 residency on modern Intel systems. This residency is achieved only when CPU is in PKG C10 and all functional blocks are in low power state. It is possible that none of the above counters present or anyone of the counter present or all counters present. For example: On my Kabylake system both of the above counters present. After suspend to idle these counts updated and prints: 6916179 6998564 This counter can be read by tools like turbostat to display. Or it can be used to debug, if modern systems are reaching desired low power state. - Provides an interface to read residency counter memory address This address can be used to get the base address of PMC memory mapped IO. This is utilized by intel_pmc_core driver to print more debug information. In addition, to avoid code duplication to read iomem, removed the read of iomem from acpi_os_read_memory() in osl.c and made a common function acpi_os_read_iomem(). This new function is used for reading iomem in in both osl.c and acpi_lpit.c. Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-10-11 15:38:10 +02:00
Rafael J. Wysocki	63705c406a	ACPI / PM: Combine two identical device resume routines ... Notice that acpi_dev_runtime_resume() and acpi_dev_resume_early() are actually literally identical after some more-or-less recent changes, so rename acpi_dev_runtime_resume() to acpi_dev_resume(), use it everywhere instead of acpi_dev_resume_early() and drop the latter. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>	2017-10-11 15:31:55 +02:00
Ulf Hansson	8055af0a4f	ACPI / PM: Remove stale function header ... acpi_dev_pm_get_node() isn't used or implemented, so remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-10-10 04:13:25 +02:00
Linus Torvalds	e7d0c41ecc	Device properties framework updates for v4.14-rc1 ... - Introduce fwnode operations for all of the separate types of "firmware nodes" that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZrcHoAAoJEILEb/54YlRxVH4P/i7MVmWxZW1qosqt8NbI+kqu rjxBiQ1YaPuwWiZk5LMRQWIr4Y52v+8uwoVAoQbpfkpQpxpUtIApqFGGHkOK091S 6wcwdAJv78m7dQGJZ96nQkBdw+qCUG+s9L3KMfXYiipwyG7bg4BVcs5jZcIqcZ4F 2xecG6DMn4ESwFbZyVULWyQh50tSBztaHEG6AU2T/07yXU3RNJmwAVVZzpHdtA80 mDbWcCFjcmhrpPa0Aq6MrSMjKso1zd8Es+xwYhXsIQpD1l0HhLLQ0X4veSPcPG4B aSNEYuribpvZ2FIRti7H7gi/F+Arm9vPdc9WHbOPLOIF1z+GJKiqjBuxUrfXKPqG v1W3f1bcApe9DfmC5z1wZBi2d7thQOzRFfc8WRrMybQ6z1MAqqe5PfAlgpMFmL22 8ZCzzXIBUsfUjVlwYBvgkKvpLioEl88otWGdhewWY6F+DZ8+vPyvrpi15P36Xgos ijX89cvyfze3m5GW08hQ6DTOVvaFoMyucYfSo6/MBamw9fbUgiEgBfUAsQyb3sRU 8g1KrwkAX8KFmoocX/AVjvwVBaKNdYeJ9Gy6EItAPxNl+F1q6vjkO0r/VeSrO1KW 3GRqw5MZP35DD9IRo4DTAjwtNVkgIUjpG/hfB7l3PFdDxWfeiM5tf2zMExhT0nIR h8s8mn61KZp0gpsE02FS =0rnk -----END PGP SIGNATURE----- Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()	2017-09-05 12:50:00 -07:00
Rafael J. Wysocki	298bd7fb26	Merge branches 'acpi-sysfs', 'acpi-apei' and 'acpi-blacklist' ... * acpi-sysfs: ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region * acpi-apei: ACPI / APEI: Suppress message if HEST not present ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: APEI: fix the wrong iteration of generic error status block ACPI: APEI: Enable APEI multiple GHES source to share a single external IRQ * acpi-blacklist: intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list()	2017-09-03 23:55:34 +02:00
Rafael J. Wysocki	01d2f105a4	Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple' ... * acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks	2017-09-03 23:54:03 +02:00
Rafael J. Wysocki	f928a49027	Merge branches 'acpi-ec', 'acpi-dma', 'acpi-processor' and 'acpi-cppc' ... * acpi-ec: ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order * acpi-dma: ACPI/IORT: Add IORT named component memory address limits ACPI: Make acpi_dma_configure() DMA regions aware ACPI: Introduce DMA ranges parsing ACPI: Make acpi_dev_get_resources() method agnostic * acpi-processor: ACPI / processor: make function acpi_processor_check_duplicates() static ACPI: processor: use dev_dbg() instead of dev_warn() when CPPC probe failed * acpi-cppc: mailbox: pcc: Drop uninformative output during boot	2017-09-03 23:53:39 +02:00
Toshi Kani	5aa5911a0e	ACPI / blacklist: add acpi_match_platform_list() ... ACPI OEM ID / OEM Table ID / Revision can be used to identify a platform based on ACPI firmware info. acpi_blacklisted(), intel_pstate_platform_pwr_mgmt_exists(), and some other funcs, have been using similar check to detect a list of platforms that require special handlings. Move the platform check in acpi_blacklisted() to a new common utility function, acpi_match_platform_list(), so that other drivers do not have to implement their own version. There is no change in functionality. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-08-29 01:42:48 +02:00
Lorenzo Pieralisi	c04ac679c6	ACPI: Introduce DMA ranges parsing ... Some devices have limited addressing capabilities and cannot reference the whole memory address space while carrying out DMA operations (eg some devices with bus address bits range smaller than system bus - which prevents them from using bus addresses that are otherwise valid for the system). The ACPI _DMA object allows bus devices to define the DMA window that is actually addressable by devices that sit upstream the bus, therefore providing a means to parse and initialize the devices DMA masks and addressable DMA range size. By relying on the generic ACPI kernel layer to retrieve and parse resources, introduce ACPI core code to parse the _DMA object. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-08-07 14:28:51 +02:00
Timur Tabi	37ef38f3f8	tty: pl011: fix initialization order of QDF2400 E44 ... The work-around for Qualcomm Technologies QDF2400 Erratum 44 hinges on a global variable defined in the pl011 driver. The ACPI SPCR parsing code determines whether the work-around is needed, and if so, it changes the console name from "pl011" to "qdf2400_e44". The expectation is that the pl011 driver will implement the work-around when it sees the console name. The global variable qdf2400_e44_present is set when that happens. The problem is that work-around needs to be enabled when the pl011 driver probes, not when the console name is queried. However, sbsa_probe() is called before pl011_console_match(). The work-around appeared to work previously because the default console on QDF2400 platforms was always ttyAMA1. The first time sbsa_probe() is called (for ttyAMA0), qdf2400_e44_present is still false. Then pl011_console_match() is called, and it sets qdf2400_e44_present to true. All subsequent calls to sbsa_probe() enable the work-around. The solution is to move the global variable into spcr.c and let the pl011 driver query it during probe time. This works because all QDF2400 platforms require SPCR, so parse_spcr() will always be called. pl011_console_match still checks for the "qdf2400_e44" console name, but it doesn't do anything else special. Fixes: 5a0722b898 ("tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44") Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-07-30 07:53:44 -07:00
Andy Shevchenko	6c9a58e84e	ACPI / boot: Correct address space of __acpi_map_table() ... Sparse complains about wrong address space used in __acpi_map_table() and in __acpi_unmap_table(). arch/x86/kernel/acpi/boot.c:127:29: warning: incorrect type in return expression (different address spaces) arch/x86/kernel/acpi/boot.c:127:29: expected char * arch/x86/kernel/acpi/boot.c:127:29: got void [noderef] <asn:2>* arch/x86/kernel/acpi/boot.c:135:23: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/acpi/boot.c:135:23: expected void [noderef] <asn:2>*addr arch/x86/kernel/acpi/boot.c:135:23: got char *map Correct address space to be in align of type of returned and passed parameter. Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-07-24 22:47:56 +02:00
Sakari Ailus	37ba983cfb	device property: Constify fwnode property API ... Make fwnode arguments to the fwnode property API const. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-07-22 00:04:51 +02:00
Sakari Ailus	99a8546469	ACPI: Constify internal fwnode arguments ... Constify internal ACPI fwnode arguments in preparation for the same in fwnode API. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-07-22 00:04:50 +02:00
Sakari Ailus	db3e50f323	device property: Get rid of struct fwnode_handle type field ... Instead of relying on the struct fwnode_handle type field, define fwnode_operations structs for all separate types of fwnodes. To find out the type, compare to the ops field to relevant ops structs. This change has two benefits: 1. it avoids adding the type field to each and every instance of struct fwnode_handle, thus saving memory and 2. makes the ops field the single factor that defines both the types of the fwnode as well as defines the implementation of its operations, decreasing the possibility of bugs when developing code dealing with fwnode internals. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-07-22 00:04:50 +02:00
Linus Torvalds	548aa0e3c5	Device properties framework updates for v4.13-rc1 ... - Rearrange the core device properties code by moving the code specific to each supported platform configuration framework (ACPI, DT and build-in) into a separate file (Sakari Ailus). - Add helper functions for accessing device properties in a firmware-agnostic way (Sakari Ailus, Kieran Bingham). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZY/OvAAoJEILEb/54YlRx8NYP/3hL9jK8yBgDEVkoNnRDN7Xj gefqm++3YO6wy8pfuACfNal2lJRFat5NDWdkBUsFA7LAfaLYe6jkIZ8YW+XTcHq7 H8dmFiDjfhVa4/urS6DTHmHqPyWLh4ayjTfwRP0yy2aW2XpXe1WNAgilLStu96iH OU44HY5FQCQipnIIcuJZpJwH51AMyJIuAV5rQJySoIuDyULRKmVQ8G/xCAfhzHCH tLcQHZnnYUdSCi29JwCu2RKKI6ta2o68EYmi1wxjvMEs2z27KVltCu+5Y9mpOIwl DU+X8hAmepzd5aJxpR69hzM+dr71+0feUOklEU+r0DJzlmdDzTK8NyEPW2Ysh0aa 0SsdtgoRWv+kq0FuzL26fpa01WOcWB8N5uDp4XUZKFCriRmBk2HNc1KRoPtvILm2 2ISOqdIPe2/fC/FOYT0mKcFXaezkONpdbZoUqWGKFw0OWkgc5Vesl7L0LlilLCS6 XpHP/ISJBDfmIwjgaDjZIV1G6PkyaKu4tPkn9NsN+ztbH02dpTodIB0qDJSimyPX cYwuDBn6NpKhk/l8b7lNMLxX8xK5EpQKw90av3LFYwZcGpyBzsoqciLONPSqF+1p jHDK4yaV+Ddwo3q5368x+eXX/Y9hfDewikoAuAUG3y0cMzuwKwFZ7MRkfl1Azbcc CLNeBd8YXBUnbzDMYaNB =EcrF -----END PGP SIGNATURE----- Merge tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These mostly rearrange the device properties core code and add a few helper functions to it as a foundation for future work. Specifics: - Rearrange the core device properties code by moving the code specific to each supported platform configuration framework (ACPI, DT and build-in) into a separate file (Sakari Ailus). - Add helper functions for accessing device properties in a firmware-agnostic way (Sakari Ailus, Kieran Bingham)" * tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Add fwnode_graph_get_port_parent device property: Add FW type agnostic fwnode_graph_get_remote_node device property: Introduce fwnode_device_is_available() device property: Move fwnode graph ops to firmware specific locations device property: Move FW type specific functionality to FW specific files ACPI: Constify argument to acpi_device_is_present()	2017-07-10 15:23:45 -07:00
Linus Torvalds	c7d28eca1d	This is the bulk of GPIO changes for the v4.13 series: ... Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D WpbE9LyAH9FY5BM8YjFX =TpW1 -----END PGP SIGNATURE----- Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...	2017-07-07 12:40:27 -07:00
Sakari Ailus	3708184afc	device property: Move FW type specific functionality to FW specific files ... The device and fwnode property API supports Devicetree, ACPI and pset properties. The implementation of this functionality for each firmware type was embedded in the fwnode property core. Move it out to firmware type specific locations, making it easier to maintain. Depends-on: ("of: Move OF property and graph API from base.c to property.c") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2017-06-22 02:55:34 +02:00
Christoph Hellwig	bcbc2265f2	acpi: always include uuid.h ... Without this the build will fail for !CONFIG_ACPI builds on x86. Fixes: 94116f81 ("ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()") Signed-off-by: Christoph Hellwig <hch@lst.de>	2017-06-08 09:03:33 +02:00
Andy Shevchenko	94116f8126	ACPI: Switch to use generic guid_t in acpi_evaluate_dsm() ... acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>	2017-06-07 12:20:49 +02:00
Andy Shevchenko	41c8bdb3ab	acpi, nfit: Switch to use new generic UUID API ... There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>	2017-06-05 19:42:02 +02:00
Andy Shevchenko	25e3ef894e	gpio: acpi: Split out acpi_gpio_get_irq_resource() helper ... The helper does retrieve pointer to struct acpi_resource_gpio from struct acpi_resource if it represents GpioInt() resource. It will be used by PNP code later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2017-05-29 11:22:48 +02:00
Linus Torvalds	28b47809b2	IOMMU Updates for Linux v4.12 ... This includes: * Some code optimizations for the Intel VT-d driver * Code to switch off a previously enabled Intel IOMMU * Support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs * Some header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that * ACPI/IORT updates and fixes * Some Exynos IOMMU optimizations * Code updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches * New command-line option to set default domain type allocated by the iommu core code * Another command line option to allow the Intel IOMMU switched off in a tboot environment * ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) * Various other small fixes and improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZEY4XAAoJECvwRC2XARrjth0QAKV56zjnFclv39aDo6eCq9CT 51+XT4bPY5VKQ2+Jx76TBNObHmGK+8KEMHfT9khpWJtFCDyy25SGckLry1nYqmZs tSTsbj4sOeCyKzOLITlRN9/OzKXkjKAxYuq+sQZZFDFYf3kCM/eag0dGAU6aVLNp tkIal3CSpGjCQ9M5JohrtQ1mwiGqCIkMIgvnBjRw+bfpLnQNG+VL6VU2G3RAkV2b 5Vbdoy+P7ZQnJSZr/bibYL2BaQs2diR4gOppT5YbsfniMq4QYSjheu1xBboGX8b7 sx8yuPi4370irSan0BDvlvdQdjBKIRiDjfGEKDhRwPhtvN6JREGakhEOC8MySQ37 mP96B72Lmd+a7DEl5udOL7tQILA0DcUCX0aOyF714khnZuFU5tVlCotb/36xeJ+T FPc3RbEVQ90m8dYU6MNJ+ahtb/ZapxGTRfisIigB6wlnZa0Evabp9EJSce6oJMkm whbBhDubeEU18n9XAaofMbu+P2LAzq8cxiRMlsDvT4mIy7jO86jjCmhpu1Tfn2GY 4wrEQZdWOMvhUsIhObXA0aC3BzC506uvnKPW3qy041RaxBuelWiBi29qzYbhxzkr DLDpWbUZNYPyFJjttpavyQb2/XRduBTJdVP1pQpkJNDsW5jLiBkpSqm9xNADapRY vLSYRX0JCIquaD+PAuxn =3aE8 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...	2017-05-09 15:15:47 -07:00
Linus Torvalds	2bd8040174	This is the bulk of GPIO changes for the v4.12 kernel cycle: ... Core changes - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZCusBAAoJEEEQszewGV1zengP/i3YgmSXJdaf26t/NxG3klU3 qx3akdQ3gEQ6BOlIY7Ew+b6qgMJynYNZa1trZgqTgLxPEKWjidyCgz+LHQ0OY+ir a7x6wr+gBj5WlgV+nBjVs4l6W8pVKCfnap/04OPEQDpxZOHs2LU5pqxxUZ9AxkKS urDFMDX55baFviQ+xAuHgamok87YoGP36A/e/fHIBepZmnochf0mCcPfIh0t8lRh s2x29PN5ZFRkl403RzjZfVCEMr9bMnSqmDquvPO++Kq0bL+3rOhuMErocd1Bg8ao LxBktkryujTaw699xK7Rq5SwcnOAPpaBY4NTmwsIJvAJuCh7qLy9JxQSBsSOT2bx 61NWUt5T/Xsi0ECYZM4YvsNpUP6XrpSTyG3c8T3fY9vXYLNKZBv1ht6OODpLeuke DxULAWP+DdzUS8a3qfKQvIJzSTloU31a1MBG58DWNJ072EQfa2YNaVE75VQk/z5/ 0xZbSHdPY/0Xgx8ltpKu37bSO676JiVQZZ1HEAuti4h21+USYueYD2L8/Bx4k9e/ 4UaOcw3MaCDHP/sf5hg17kQBjhhS0lV9Zv6H9QbHZUocJTJlIU+vXtgkQlrfi3n8 8j5m+ywVarmLtPqg1j2rqcw7LBCPe0qRXH3e5X/YmNMc3rH9bQz4cTo8ZSN9r8zS c17zGbbAqlGsBkpFAbQz =DGPb -----END PGP SIGNATURE----- Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ...	2017-05-04 12:05:32 -07:00
Linus Torvalds	174ddfd5df	Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip ... Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ...	2017-05-01 16:15:18 -07:00