The SPDX identifier is a legally binding shorthand, which
can be used instead of the full boiler plate text.
The file ieee80211_module.c has a proper SPDX line, so the
GPL boiler plate text is not needed.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200703122604.12096-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code has the functionality to insert the GPIO lines using
the global GPIO numbers through module parameters.
As we are clearly deprecating the use of global GPIO numbers
look up the GPIO descriptors from the device instead. This
usually falls back to device hardware descriptions using e.g.
device tree or ACPI. This device clearly supports device
tree when used over SPI for example.
For example, this can be supplied in the device tree like so:
wfx@0x01 {
compatible = "silabs,wf200";
reset-gpios = <&gpio0 1>;
wakeup-gpios = <&gpio0 2>;
};
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200703130756.514868-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable bytes_done is not initialized and hence the first
FIFO size check on bytes_done may be breaking prematurely from
the loop if bytes_done contains a large bogus uninitialized value.
Fix this by initializing bytes_done to zero.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a9408ad79f ("staging: wfx: load the firmware faster")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200706132017.487627-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple interface on different channels are in use. It is
necessary to advertise the AP that the device is no more awake before to
switch to the other channel.
Until now, PS-Poll was the preferred mechanism for that. However. The
new firmwares (>= 3.7) now nicely support FastPS.
FastPS improves bandwidth and compatibility with AP.
This patch drop the complex and rarely used mechanism introduced in the
commit dd5eba1bb5 ("staging: wfx: fix support for AP that do not
support PS-Poll") and use FastPS as soon as it is possible.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some advanced usage or debug scenarios, it could interesting to
change the value of ps_timeout or eventually to force use of PS-Poll
frames.
The wext API (used by iwconfig) provide a way to change ps_timeout.
However, this API is obsolete and it seems a little weird to use (it
seems it does apply the change, so the user have to disable then
re-enable de power save)
On side of nl80211, there is no way to change the ps_timeout.
This patch provides a file in debugfs to change the value of ps_timeout.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To enable the TKIP/CCMP replay protection, the frames has to be
processed in the right order. However, the device is not able to
re-order the frames during BlockAck sessions.
Mac80211 is able to reorder the frames, but it need the information
about the BlockAck sessions start and stop. Unfortunately, since the
BlockAck is fully handled by the hardware, these frames were not
forwarded to the host. So, if the driver ask to mac80211 to apply the
replay protection, it drop all misordered frames.
So, until now, the driver explicitly asked to mac80211 to not apply
the CCMP/TKIP replay protection.
The situation has changed with the API 3.4 of the device firmware. The
firmware forward the BlockAck information. Mac80211 is now able to
correctly reorder the frames. There is no more reasons to drop
cryptographic data.
This patch also impact the older firmwares. There will be a performance
impact on these firmware (since the misordered frames will dropped).
However, we can't keep the replay protection disabled.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't want mac80211 try to check MMIC and other security mechanisms.
So, the driver remove all the data related to the encryption (IV, ICV,
MMIC).
However, enabling RX_FLAG_PN_VALIDATED is sufficient for that.
So, drop the useless function wfx_drop_encrypt_data() and enable
RX_FLAG_PN_VALIDATED.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that in the old days, the RSSI information could be missing. In
this case, in order to not pollute the RSSI stats, the frame was
dropped (!).
It is far better to mark the frame with the flag RX_FLAG_NO_SIGNAL_VAL.
In add, the problem seems now fixed in the firmware (at least, it has
not been encountered with recent firmwares).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver does not call ieee80211_sta_set_buffered() anymore, it
is no more necessary to maintain a counter of buffered frames for each
stations.
This change allows to simplify the processing in multiple places in the
driver.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a station go to sleep, the driver receive the status REQUEUE and
forward this answer to mac80211. So, neither the driver, neither the
hardware buffer the frames. So the call to ieee80211_sta_set_buffered is
useless.
In add, it seems that mac80211 does not expect to receive
ieee80211_sta_set_buffered(false) after the station is asleep(). When
the device send data to a station, the following sequence can be
observed:
- Mac80211 call wfx_sta_notify(awake).
- The driver calls ieee80211_sta_set_buffered(true). Since the
station is awake, its TIM is not set.
- Mac80211 receive a power save notification from the station, so it
calls wfx_sta_notify(asleep).
- Then, since the driver has declared it has buffered some frames,
the TIM of the station should be set. This action is delayed by
mac80211.
- The device also notice the station go to sleep. It replies the
REQUEUE status for the buffered frames. The driver forward this
status to mac80211.
- There is no more frames in queues, so the driver call
ieee80211_sta_set_buffered(false).
- Mac80211 updates the TIM but since there is no frames buffered by
the driver, it set the TIM for the station to 0.
Anyway, correctly use the ieee80211_sta_set_buffered() API solves the
problem.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the loading of the firmware, the WFX_DCA_GET register provide the
number available bytes in the receiving buffer. It is not necessary to
access to the WFX_DCA_GET after sent of each firmware fragment.
This patch allows to send the firmware:
- in 64ms instead of 130ms using SDIO bus
- in 78ms instead of 115ms using SPI bus
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device is able to send multiple Tx confirmations in the one reply.
In this case, there is only one vif identifier for all the
confirmations.
Unfortunately, to generate this kind of messages the device squashes all
the confirmations whatever their vif ID and use the vif ID of the first
confirmation. So, the driver cannot rely on the vif ID mentioned in the
header. Fortunately, using the packet_id, the driver can retrieve the Tx
request and the associated vif.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver has sent a frame on a virtual interface (vif), it
expects to receive the confirmation on the same vif.
This patch add a check for that.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.
This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many defined constants in wifi.h are unused and/or available from
<linux/ieee80211.h>, some with slightly different names. Use the
common ones, rename where necessary and remove unused.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200701164213.4205-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many defined constants in wifi.h are unused and/or available from
<linux/ieee80211.h>, some with slightly different names. Use the
common ones, rename where necessary and remove unused.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200701182957.7932-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The movement of wilc1000 out of staging left an obsolete TODO file.
Remove that as it's no longer needed.
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: <Ajay.Kathat@microchip.com>
Cc: <Venkateswara.Kaja@microchip.com>
Cc: <Sripad.Balwadgi@microchip.com>
Cc: <Nicolas.Ferre@microchip.com>
Cc: <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the movement of the wilc1000 driver out of staging, pulled in
here so that we do not end up doing duplicate work.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next:
wilc1000: move wilc driver out of staging
Use %s and __func__ in place of function names.
This solves following checkpatch.pl warning
WARNING: Prefer using '"%s...", __func__' to using 'rtw_do_join', this function's name, in a string
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200701145457.9562-1-puranjay12@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a WARNING of Block comments use * on subsequent lines.
Signed-off-by: Simon Fong <simon.fodin@gmail.com>
Link: https://lore.kernel.org/r/20200630022228.GA580@simon-pc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To make the separation clear between vchiq's header files and vchiq.h,
which is to be used by services and is the 'public' API, move it into a
dedicated includes directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-48-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Those are only used in the core vchiq code, while present in vchiq's
'public' API header. Move them into the right place.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-47-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This used to be vchiq_if.h but vchiq.h is more concise for an include
file that will hopefully be in the future in the includes directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-46-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The barrier is only used by core code. So keep the barrier definition in
the core header.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-45-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the functions that vchi currently provides are a 1:1 mapping to its
vchiq counterparts. Get rid of vchi altogether and use vchiq's on all
services.
In the process also get rid of the vchi directory, as the only remaining
file was a TODO file, which now lives in the parent directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-44-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't really merge it with vchiq_queue_message() as it has internal
users that will not benefit from the retry mechanism
vchiq_queue_kernel_message() uses. So, for the sake of getting rid of
vchi, move it into vchiq.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-43-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its vchiq counterpart, vchiq_bulk_transmit() is only used by vchi. We
can then merge both functions by moving vchi_bulk_queue_transmit()'s
retry mechanism into vchiq_bulk_transmit() and let services call the
later.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-42-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its vchiq counterpart, vchiq_bulk_receive() is only used by vchi. We can
then merge both functions by moving vchi_bulk_queue_receive()'s retry
mechanism into vchiq_bulk_receive() and let services call the later.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-41-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_if.h is used by service consumers and only the exported API should
be present. Move the rest of definitions, which were not exported by the
way, to vchiq_core.h where they belong.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-40-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function is being exported although there is no use for it outside
of vchiq's core code. Keep it local then.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-39-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is already enough duplication with regard to fourcc generation in
the kernel. Let's at least use the same macro all over the vchiq
ecosystem.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-35-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The services have access to struct vchiq_header's internals, so we can
let them get the data pointer. This pretty much makes both functions
exactly the same, which will allow us to make a switch to
vchiq_msg_hold() further down the road.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-34-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchi created an opaque structure to be held by services while they
process callback messages. The contents of this opaque structure are the
service handle, which all services already maintain, and a pointer to
vchiq's message structure, struct vchiq_header.
Let's get rid of this opaque structure and directly pass struct
vchiq_header, which is what ultimately vchiq consumes when handling
callback messages.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-33-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure only contains a single parameter, which is the underlying
vchiq handle. Get rid of the struct and directly pass the handle around.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-32-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For initialization, vchi has its own params structure, which is then
translated to vchiq's params structure. They are essentially the same,
so lets directly use vchiq's.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-31-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As vchiq_shim's callback does nothing aside from pushing messages into
the service's queue, let's bypass it and jump directly to the service's
callbacks, letting them choose whether to use the message queue.
It turns out most services don't need to use the message queue, which
makes for simpler code in the end.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-29-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq consumer drivers may need to use this function in order to get the
benefits of vchiq's per service message queueing mechanism.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-28-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
