set PHY layer or Link layer test pattern
PHY test pattern is used for PHY SI check.
Link layer test will not affect PHY SI.
- normal video mode
0 = DP_TEST_PATTERN_VIDEO_MODE
- PHY test pattern supported
1 = DP_TEST_PATTERN_D102
2 = DP_TEST_PATTERN_SYMBOL_ERROR
3 = DP_TEST_PATTERN_PRBS7
4 = DP_TEST_PATTERN_80BIT_CUSTOM
5 = DP_TEST_PATTERN_CP2520_1
6 = DP_TEST_PATTERN_CP2520_2 = DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE
7 = DP_TEST_PATTERN_CP2520_3
- DP PHY Link Training Patterns
8 = DP_TEST_PATTERN_TRAINING_PATTERN1
9 = DP_TEST_PATTERN_TRAINING_PATTERN2
0xa = DP_TEST_PATTERN_TRAINING_PATTERN3
0xb = DP_TEST_PATTERN_TRAINING_PATTERN4
- DP Link Layer Test pattern
0xc = DP_TEST_PATTERN_COLOR_SQUARES
0xd = DP_TEST_PATTERN_COLOR_SQUARES_CEA
0xe = DP_TEST_PATTERN_VERTICAL_BARS
0xf = DP_TEST_PATTERN_HORIZONTAL_BARS
0x10= DP_TEST_PATTERN_COLOR_RAMP
debugfs phy_test_pattern is located at /syskernel/debug/dri/0/DP-x
--- set test pattern
echo <test pattern #> > test_pattern
- custom test pattern
If test pattern # is not supported, NO HW programming will be done
for DP_TEST_PATTERN_80BIT_CUSTOM, it needs extra 10 bytes of data
for the user pattern. input 10 bytes data are separated by space
echo 0x4 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa >
test_pattern
--- reset test pattern
echo 0 > test_pattern
--- HPD detection is disabled when set PHY test pattern
when PHY test pattern (pattern # within [1,7]) is set, HPD pin of
HW ASIC is disable. User could unplug DP display from DP connected
and plug scope to check test pattern PHY SI.
If there is need unplug scope and plug DP display back, do steps
below:
echo 0 > phy_test_pattern
unplug scope
plug DP display.
"echo 0 > phy_test_pattern" will re-enable HPD pin again so that
video sw driver could detect "unplug scope" and "plug DP display"
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- define new dpcd address in drm
- implement new members in dpcd_caps to store values read from new dpcd address
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Removed dal/dm/dc loggers from linux, switched to kernel prints
- Modified functions that used these directly to use macros
- dc_logger support is completely dropped from Linux
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we still go through DC code that does error checking, retries,
etc. There's no need for that since DRM already does that for us. This
simplifies the code a bit and makes it easier to debug.
This also ensures we correctly tell DRM how many bytes have actually
been read, as we should. This allows DRM to correctly read the EDID on
the Chamelium DP port.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM's DP helpers take care of dealing with the error code for us. In
order not to step on each other's toes we'll need to be able to simply
read auch channel replies without further logic based on return values.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access to GPIO needs to be serialized. Aux transactions are already
serialized in DRM but we also need to serialize access to the GPIO pin
for purposes of DP dongle detection.
Call is_dp_sink_present through DM so we can lock correctly. This
follows the same pattern used for DPCD transactions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
function description
get/ set DP configuration: lane_count, link_rate, spread_spectrum
valid lane count value: 1, 2, 4
valid link rate value:
06h = 1.62Gbps per lane
0Ah = 2.7Gbps per lane
0Ch = 3.24Gbps per lane
14h = 5.4Gbps per lane
1Eh = 8.1Gbps per lane
debugfs is located at /sys/kernel/debug/dri/0/DP-x/link_settings
--- to get dp configuration
xxd -l 300 phy_settings
It will list current, verified, reported, preferred dp configuration.
current -- for current video mode
verified --- maximum configuration which pass link training
reported --- DP rx report caps (DPCD register offset 0, 1 2)
preferred --- user force settings
--- set (or force) dp configuration
echo <lane_count> <link_rate>
for example, to force to 2 lane, 2.7GHz,
echo 4 0xa > link_settings
spread_spectrum could not be changed dynamically.
in case invalid lane count, link rate are force, no hw programming will be
done. please check link settings after force operation to see if HW get
programming.
xxd -l 300 link_settings
check current and preferred settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in case we have very few pins in the table, check fails and we can't boot
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add generic indirect register access following our register access pattern
this will make it easier to review code and programming sequence,
with all the complexity hidden in macro
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
we were using 6 instances based on i2caux_dce110.c
[HOW]
pass in how many instances to ctor
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expose dc function to be called by linux dm
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Megachip dockings accesses ddc line through display driver when
installing FW. Previously, we would fail every transaction because
link attached to mst branch did not have their ddc transaction type
set.
[How]
Set ddc transaction type when mst branch is connected.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate HUBP surface size and rotation/mirror programming so that
HUBP revision without mirror/rotation do not access those register
fields.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cc19514113.
This commit was problematic on other OSes. The real solution is to
leave all the error checking to DRM and don't do it in DC, which is
addressed by "Return aux replies directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8a61bc085f.
Need to revert "make dm_dp_aux_transfer return payload bytes instead of
size", which this commit is based on. That commit was problematic on
other OSes. The real solution is to leave all the error checking to DRM
and don't do it in DC, which is addressed by "Return aux replies
directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This shouldn't happen, but if it does, we'll get a backtrace of the
caller, and update the pin_size values as needed.
v2:
* Check bo->pin_count instead of placement flags (Christian König)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Concurrent execution of the non-atomic arithmetic could result in
completely bogus values.
v2:
* Rebased on v2 of the previous patch
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106872
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of CPU invisible VRAM. Preparation for the following, no
functional change intended.
v2:
* Also change amdgpu_vram_mgr_bo_invisible_size to
amdgpu_vram_mgr_bo_visible_size, allowing further simplification
(Christian König)
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
replace run queue by a list of run queues and remove the
sched arg as that is part of run queue itself
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is in preparation for a better load balancing in
scheduler. It allows us to associate entities with the
run queues instead of binding them to a scheduler.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are initializing the entity before the scheduler is actually
initialized.
This can lead to all kind of problem, but especially NULL pointer deref
because of Nayan's scheduler work.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop using 'magic numbers' when registering interrupt sources.
v2: Switch to kernel style comments.
v3:
Rebase.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Rebase
v3: Use defines for CP_SQ and CP_ECC_ERROR interrupts.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the clocks into right Mhz unit. Otherwise, it will miss
the equal situation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gfxoff feature for vega12 is workable. So, there is no need to
mask it any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export apis for enabling/disabling SMU gfxoff support.
v2: fit the latest gfxoff support framework
v3: add feature_mask control
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gfxoff feature may depends on the CGCG(on vega12, that's the case). This
change will help to enable gfxoff feature more frequently.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On vega12, the bit0 of RLC_CGTT_MGCG_OVERRIDE is reserved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU owns this register so the driver should not set it
to avoid breaking gfxoff.
v2: update description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The save restore list initialization does not have to be pg guarded.
And for some asic(e.g. Vega12), it does not have cntl/gpm/srm lists.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CSIB init has no relation with rlc version and pg status. It should be
needed regardless of them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
v2: fit amdgpu_bo_pin change(take one less argument)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 22cc6c5e19 (drm/amdgpu: Add runtime VCN PG support)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make register read/write reliable
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN won't get power off when only jpeg active
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A call to ttm_bo_unref() clears the supplied pointer to NULL, while
ttm_bo_put() does not. None of the converted call sites requires the
pointer to become NULL, so the respective assign operations has been
left out from the patch.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
