By the time skl_ddi_clock_get() is called - and thus
skl_calc_wrpll_link() - we've just got the hw state from the pll
registers. We don't need to read them again: we can rather reuse what
was cached in the dpll_hw_state.
v2: rename state variable to pll_state, make argument const in
skl_calc_wrpll_link() and remove not useful warning (from Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-2-lucas.demarchi@intel.com
The live_context() function returns error pointers. It never returns
NULL.
Fixes: 9c1477e83e ("drm/i915/selftests: Exercise adding requests to a full GGTT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam
We're already updating the engine_mask to reflect what's in the HW, so
we can just get the info from there. A couple of macros have been added
to facilitate this.
v2: Appease checkpatch
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322002431.9585-1-daniele.ceraolospurio@intel.com
Iterate over child devices instead of ports in parse_ddi_ports() to
initialize ddi_port_info. We'll eventually need to decide some stuff
based on the child device order, which may be different from the port
order.
As a bonus, this allows better abstractions for e.g. dvo port mapping.
There's a subtle change in the DDC pin and AUX channel sanitization as
we change the order. Otherwise, this should not change behaviour.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322121008.4456-1-jani.nikula@intel.com
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlyTxEYACgkQlvcN/ahK
Bwpfhgf9HTwlxHKPwRL70o5Ilp7JVjeLjM5IgDgz+o7F+UZn2OdWocmSDAbJ+lwe
V+LXImc5tykGNRzgn4lXljGv3jqxOgVOxEBo53hVjXeYE/jIdbGDF1cx+1tSke67
lbO61dD9RM5GG9eLuzZ9S72qv5mfBYKHJZuULqOei/Ohnubkg0kDQ3zQEFDah1mh
kqHJkd+x1PwcwBnAjbWdIaCMiwrVmxj7yXLQS8bJzSFKc0/r7HlG8qNWmiBllH0D
aRMO2phHkXCVZY+GWWCEOZwz7ve23sibYm9tzBS69nbWJL12CAomB/8LrRPM2K5v
tVBNrX0eNHMKtOa0En0oF37BXUXizQ==
=DVKQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-03-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
Fixup the errno as we adjusted the error path to receive the errno and
not compute it itself from ERR_PTR(ctx) anymore.
drivers/gpu/drm/i915/i915_gem_context.c:793 i915_gem_context_open() warn: passing a valid pointer to 'PTR_ERR'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3aa9945a52 ("drm/i915: Separate GEM context construction and registration to userspace")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325090413.19906-2-chris@chris-wilson.co.uk
The AGPBUSY thing doesn't work on i945gm anymore. This means
the gmch is incapable of waking the CPU from C3 when an interrupt
is generated. The interrupts just get postponed indefinitely until
something wakes up the CPU. This is rather annoying for vblank
interrupts as we are unable to maintain a steady framerate
unless the machine is sufficiently loaded to stay out of C3.
To combat this let's use pm_qos to prevent C3 whenever vblank
interrupts are enabled. To maintain reasonable amount of powersaving
we will attempt to limit this to C3 only while leaving C1 and C2
enabled.
v2: Use READ_ONCE() (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30364
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322180804.3300-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
If I'm reading the spec right AML 0x87CA is a Y SKU, so it
should be marked as ULX in our old style terminology.
Cc: stable@vger.kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c0c46ca461 ("drm/i915/aml: Add new Amber Lake PCI ID")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since commit b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we
submit the first batch/context"), intel_suspend_gt_powersave() has been
a no-op. As we still do not need to do anything explicitly on suspend
(we do everything required on idling), remove the defunct function.
References: b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context")
Suggested-by: "Hiatt, Don" <don.hiatt@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk
GuC may send notification messages with payload larger than
single u32. Prepare driver to accept longer messages.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321120004.53012-1-michal.wajdeczko@intel.com
Initially found issue with closed context debug check when pin
hw_id for GVT context, looks we should always pin hw_id for that
as GVT context is fixed for each vGPU life cycle, and we'd also
like to get pinned hw_id e.g for perf reason, etc.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190311023747.1426-1-zhenyuw@linux.intel.com
EHL uses the same firmware as ICL.
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-6-rodrigo.vivi@intel.com
EHL has a different number of subslices.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-5-rodrigo.vivi@intel.com
Configure the correct set of outputs for EHL. EHL has three DDI's
plus DSI.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-4-rodrigo.vivi@intel.com
Elkhart Lake has a different set of PLLs as compared to Ice Lake,
although programming them is very similar.
v2: Rebase on top of s/icl_pll_funcs/combo_pll_funcs
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-3-rodrigo.vivi@intel.com
Add ElkhartLake as a unique platform as there are some differences
between it and Icelake.
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-2-rodrigo.vivi@intel.com
Add known EHL PCI IDs.
v2 (Rodrigo): Removed x86 early quirk. To be sent in a separated
patch cc'ing the appropriated list and maintainers for
proper ack.
v3: (Rodrigo): - Removed .num_pipes = 3 that is coming since GEN&_FEATURES.
- Added ppgtt type and size after rework from Bob and Chris
v4: (Rodrigo): - remove ppgtt type added on v3. Jose pointed it is not
needed.
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-1-rodrigo.vivi@intel.com
Rename intel_find_panel_downclock() to intel_panel_edid_downclock_mode()
to make it clear it's looking for the downclock mode in the EDID.
And while at it polish the implementation a bit as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Some monitors apparently forget to mark any mode as preferred in the
EDID. In this particular case we have a very generic looking ID
"PNP Model 0 Serial Number 4" / "LVDS 800x600" so a specific quirk
doesn't seem particularly wise. Also the quirk we have
(EDID_QUIRK_FIRST_DETAILED_PREFERRED) is actually defunct so we'd
have to fix it first.
When there is no preferred mode we currently fall back to the VBT.
That approach fails us here as the VBT mode is 1024x768 whereas
the panel resolution is 800x600. So instead of falling back to the
VBT when there is no preferred mode let's just pick the first
probed mode. Only if the EDID provided no modes we fall back to
the VBT.
For this machine the VBIOS would appear to select the 800x600
60Hz EST mode rather than the first detailed mode (which is
the new fallback will pick). The two modes differ only by
having opposite sync polarities, which does not seem to matter
to the panel in question.
v2: Make sure the probed_modes list is not empty
Cc: Adam Jackson <ajax@redhat.com>
Cc: Roberto Viola <cagnulein@gmail.com>
Tested-by: Roberto Viola <cagnulein@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109780
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-2-ville.syrjala@linux.intel.com
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Both LVDS and eDP have the same code to look up the preferred mode
from the connector probed_modes list. Move the code to a common
location.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
I added the loop but neglected to actually pass the level to the
function. So we were just looping 8 times calculating the exact
same thing every time.
Fixes: df331de3f8 ("drm/i915: Allocate enough DDB for the cursor")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321175128.32178-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Previously, our view has been always to run the engines independently
within a context. (Multiple engines happened before we had contexts and
timelines, so they always operated independently and that behaviour
persisted into contexts.) However, at the user level the context often
represents a single timeline (e.g. GL contexts) and userspace must
ensure that the individual engines are serialised to present that
ordering to the client (or forgot about this detail entirely and hope no
one notices - a fair ploy if the client can only directly control one
engine themselves ;)
In the next patch, we will want to construct a set of engines that
operate as one, that have a single timeline interwoven between them, to
present a single virtual engine to the user. (They submit to the virtual
engine, then we decide which engine to execute on based.)
To that end, we want to be able to create contexts which have a single
timeline (fence context) shared between all engines, rather than multiple
timelines.
v2: Move the specialised timeline ordering to its own function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-4-chris@chris-wilson.co.uk
It can be useful to have a single ioctl to create a context with all
the initial parameters instead of a series of create + setparam + setparam
ioctls. This extension to create context allows any of the parameters
to be passed in as a linked list to be applied to the newly constructed
context.
v2: Make a local copy of user setparam (Tvrtko)
v3: Use flags to detect availability of extension interface
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-3-chris@chris-wilson.co.uk
In preparation to making the ppGTT binding for a context explicit (to
facilitate reusing the same ppGTT between different contexts), allow the
user to create and destroy named ppGTT.
v2: Replace global barrier for swapping over the ppgtt and tlbs with a
local context barrier (Tvrtko)
v3: serialise with struct_mutex; it's lazy but required dammit
v4: Rewrite igt_ctx_shared_exec to be more different (aimed to be more
similarly, turned out different!)
v5: Fix up test unwind for aliasing-ppgtt (snb)
v6: Tighten language for uapi struct drm_i915_gem_vm_control.
v7: Patch the context image for runtime ppgtt switching!
Testcase: igt/gem_vm_create
Testcase: igt/gem_ctx_param/vm
Testcase: igt/gem_ctx_clone/vm
Testcase: igt/gem_ctx_shared
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-2-chris@chris-wilson.co.uk
An idea for extending uABI inspired by Vulkan's extension chains.
Instead of expanding the data struct for each ioctl every time we need
to add a new feature, define an extension chain instead. As we add
optional interfaces to control the ioctl, we define a new extension
struct that can be linked into the ioctl data only when required by the
user. The key advantage being able to ignore large control structs for
optional interfaces/extensions, while being able to process them in a
consistent manner.
In comparison to other extensible ioctls, the key difference is the
use of a linked chain of extension structs vs an array of tagged
pointers. For example,
struct drm_amdgpu_cs_chunk {
__u32 chunk_id;
__u32 length_dw;
__u64 chunk_data;
};
struct drm_amdgpu_cs_in {
__u32 ctx_id;
__u32 bo_list_handle;
__u32 num_chunks;
__u32 _pad;
__u64 chunks;
};
allows userspace to pass in array of pointers to extension structs, but
must therefore keep constructing that array along side the command stream.
In dynamic situations like that, a linked list is preferred and does not
similar from extra cache line misses as the extension structs themselves
must still be loaded separate to the chunks array.
v2: Apply the tail call optimisation directly to nip the worry of stack
overflow in the bud.
v3: Defend against recursion.
v4: Fixup local types to match new uabi
Opens:
- do we include the result as an out-field in each chain?
struct i915_user_extension {
__u64 next_extension;
__u64 name;
__s32 result;
__u32 mbz; /* reserved for future use */
};
* Undecided, so provision some room for future expansion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-1-chris@chris-wilson.co.uk
Adding a call to intel_uc_suspend in i915_gem_suspend, which
is a common point for the suspend/resume and hibernate paths.
This fixes an unbalanced call that causes issues with the CTB
register/deregister.
v2: Making the call unconditional (Daniele)
Moving the call to after the GEM_BUG_ON (Chris)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321203804.6845-1-sujaritha.sundaresan@intel.com
32 is too many for the likes of kbl, and in order to insert that many
requests into the ring requires us to declare the first few hung --
understandably a slow and unexpected process. Instead, measure the size
of a singe requests and use that to estimate the upper bound on the
chain length we can use for our test, remembering to flush the previous
chain between tests for safety.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321194031.20240-1-chris@chris-wilson.co.uk
If we are already in the desired write domain of a set-domain ioctl,
then there is nothing for us to do and we can quickly return back to
userspace, avoiding any lock contention. By recognising that the
write_domain is always a subset of the read_domains, and excluding the
no-op case of requiring 0 read_domains in the ioctl, we can infer if the
current write_domain matches the target read_domains, there is nothing
for us to do.
Secondary aspect of this is that we undo the arbitrary fetching and
potential flushing of all pages for a set-domain(.write=CPU) call on a
fresh object -- which was introduced simply because we do the get-pages
before taking the struct_mutex.
References: 40e62d5d6b ("drm/i915: Acquire the backing storage outside of struct_mutex in set-domain")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-2-chris@chris-wilson.co.uk
When we return pages to the system, we ensure that they are marked as
being in the CPU domain since any external access is uncontrolled and we
must assume the worst. This means that we need to always flush the pages
on acquisition if we need to use them on the GPU, and from the beginning
have used set-domain. Set-domain is overkill for the purpose as it is a
general synchronisation barrier, but our intent is to only flush the
pages being swapped in. If we move that flush into the pages acquisition
phase, we know then that when we have obj->mm.pages, they are coherent
with the GPU and need only maintain that status without resorting to
heavy handed use of set-domain.
The principle knock-on effect for userspace is through mmap-gtt
pagefaulting. Our uAPI has always implied that the GTT mmap was async
(especially as when any pagefault occurs is unpredicatable to userspace)
and so userspace had to apply explicit domain control itself
(set-domain). However, swapping is transparent to the kernel, and so on
first fault we need to acquire the pages and make them coherent for
access through the GTT. Our use of set-domain here leaks into the uABI
that the first pagefault was synchronous. This is unintentional and
baring a few igt should be unoticed, nevertheless we bump the uABI
version for mmap-gtt to reflect the change in behaviour.
Another implication of the change is that gem_create() is presumed to
create an object that is coherent with the CPU and is in the CPU write
domain, so a set-domain(CPU) following a gem_create() would be a minor
operation that merely checked whether we could allocate all pages for
the object. On applying this change, a set-domain(CPU) causes a clflush
as we acquire the pages. This will have a small impact on mesa as we move
the clflush here on !llc from execbuf time to create, but that should
have minimal performance impact as the same clflush exists but is now
done early and because of the clflush issue, userspace recycles bo and
so should resist allocating fresh objects.
Internally, the presumption that objects are created in the CPU
write-domain and remain so through writes to obj->mm.mapping is more
prevalent than I expected; but easy enough to catch and apply a manual
flush.
For the future, we should push the page flush from the central
set_pages() into the callers so that we can more finely control when it
is applied, but for now doing it one location is easier to validate, at
the cost of sometimes flushing when there is no need.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-1-chris@chris-wilson.co.uk
The timeline->name is only used for convenience in pretty printing the
i915_request.fence->ops->get_timeline_name() and it is just as
convenient to pull it from the gem_context directly. The few instances
of its use inside GEM_TRACE() has proven more of a nuisance than
helpful, so not worth saving imo.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321140711.11190-4-chris@chris-wilson.co.uk
Define a mutex for the exclusive use of interacting with the per-file
context-idr, that was previously guarded by struct_mutex. This allows us
to reduce the coverage of struct_mutex, with a view to removing the last
bits coordinating GEM context later. (In the short term, we avoid taking
struct_mutex while using the extended constructor functions, preventing
some nasty recursion.)
v2: s/context_lock/context_idr_lock/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321140711.11190-2-chris@chris-wilson.co.uk
In later patches, it became apparent that userspace can see a partially
constructed GEM context and begin using it before it was ready, to much
hilarity. Close this window of opportunity by lifting the registration of
the context with userspace (the insertion of the context into the filp's
idr) to the very end of the CONTEXT_CREATE ioctl.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321140711.11190-1-chris@chris-wilson.co.uk
The mock_context() function returns NULL on error, it doesn't return
error pointers.
Fixes: 85fddf0b00 ("drm/i915: Introduce a context barrier callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321092451.GK2202@kadam
gcc-4.8 and older dislike the use of __builtin_constant_p() within a
constant expression context, and so we must use the magical
__is_constexpr() instead.
For example, with gcc-4.8.5:
../drivers/gpu/drm/i915/i915_reg.h:167:27: error: first argument to ‘__builtin_choose_expr’ not a constant
../include/linux/build_bug.h:16:45: error: bit-field ‘<anonymous>’ width not an integer constant
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Uma Shankar <uma.shankar@intel.com>
Fixes: baa09e7d2f ("drm/i915: use REG_FIELD_PREP() to define register bitfield values")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320154021.5244-1-chris@chris-wilson.co.uk
There has unfortunately been a conflict with the following 3 commits:
commit e9961ab95a
Author: Ayan Kumar Halder <ayan.halder@arm.com>
Date: Fri Nov 9 17:21:12 2018 +0000
drm: Added a new format DRM_FORMAT_XVYU2101010
commit 7ba0fee247
Author: Brian Starkey <brian.starkey@arm.com>
Date: Fri Oct 5 10:27:00 2018 +0100
drm/fourcc: Add AFBC yuv fourccs for Mali
and
commit 50bf5d7d59
Author: Swati Sharma <swati2.sharma@intel.com>
Date: Mon Mar 4 17:26:33 2019 +0530
drm: Add Y2xx and Y4xx (xx:10/12/16) format definitions and fourcc
Unfortunately gcc didn't warn about the redefinitions, because the
double defines were the set to same value, and gcc apparently no longer
warns about that.
Fix this by using new XYVU for i915, without alpha, and making the
Y41x definitions match msdn, with alpha.
Fortunately we caught it early, and the conflict hasn't even landed in
drm-next yet.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: malidp@foss.arm.com
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319121702.6814-1-maarten.lankhorst@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com> #irc
Acked-by: Sean Paul <sean@poorly.run>
Reviewed-by: Ayan Kumar halder <ayan.halder@arm.com>
This allows us to ditch i915 in some more places.
v2: use local var in check_vgpu (Paulo)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-9-daniele.ceraolospurio@intel.com
This will allow futher simplifications in the uncore handling.
v2: move register access setup under uncore (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-8-daniele.ceraolospurio@intel.com
Move the init, fini, prune, suspend, resume function to work on
intel_uncore instead of dev_priv.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-5-daniele.ceraolospurio@intel.com
Now that the internal code all works on intel_uncore, flip the
external-facing interface.
v2: fix GVT.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-4-daniele.ceraolospurio@intel.com
Get/put functions used outside of uncore.c are updated in the next
patch for a nicer split.
v2: use dev_priv where we still have it (Paulo)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-3-daniele.ceraolospurio@intel.com
Upper bits are reserved on gen6, so no issue if we write them. Note that
we're already doing this in the non-MT case of IVB, which uses the same
register.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320122732.14512-1-chris@chris-wilson.co.uk
This patch fixes the PORT_SYNC_MODE_MASTER_SELECT macro
to correctly do the left shifting to set the port sync
master select correctly.
I have tested this fix on ICL.
Fixes: 49edbd4978 ("drm/i915/icl: Define TRANS_DDI_FUNC_CTL DSI registers")
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319221847.21311-1-manasi.d.navare@intel.com
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304092908.57382-2-andriy.shevchenko@linux.intel.com
skl_update_pipe_wm() is quite pointless now. Just inline it into
skl_compute_wm().
v2: s/skl_build_pipe_wm/skl_update_pipe_wm/ in the commit message (Matt)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-10-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Clean up skl_allocate_pipe_ddb() a bit by moving the 'wm' variable
to tighter scope. We'll also consitify it where appropriate.
Also initialize plane_alloc/uv_plane_alloc when decrlaring them
rather than later.
v2: Update commit message (Matt)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-8-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Currently we disable all the watermarks above the selected max
level for every plane. That would mean that the cursor's watermarks
may also get modified when another plane causes the selected
max watermark level to change. That is not so great as we would
like to keep the cursor as indepenedent as possible to avoid
having to throttle it in resposne to other plane activity.
To avoid that let's keep the watermarks enabled even for levels
above the max selected watermark level, iff the plane has enough
ddb for that particular level. This way the cursor's enabled
watermarks only depend on the cursor itself. This is safe because
the hardware will never choose to use a watermark level unless
all enabled planes have also enabled that level.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-7-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We use a fixed ddb allocation for the cursor. Now the calculation
actually makes sure we have enough ddb space, but let's double check
anyway.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-6-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Currently we just assume that 32 or 8 blocks of ddb is sufficient
for the cursor. The 32 might be, but the 8 is certainly not. The
minimum we need is at least what level 0 watermarks need, but that
is a bit restrictive, so instead let's calculate what level 7
would need for a 256x256 cursor. We'll use that to determine the
fixed ddb allocation for the cursor. This way the cursor will never
be responsible for missing out on deeper power saving states.
v2: Loop to make sure this works even if some wm levels are
totally disabled (latency==0)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190319160311.23529-1-ville.syrjala@linux.intel.com
Extract the meat of skl_compute_plane_wm_params() into a lower
level helper that doesn't depend on the plane state. We'll
reuse this for the cursor ddb allocation calculations.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
skl_compute_plane_wm() doesn't actually need the plane state. While
it would make logically sense to pass it, we shall need to reuse
skl_compute_plane_wm() to compute the minimum ddb allocation for
the cursor before the cursor may be enabled. Thus we can't rely
on the plane state. The alternative would be to duplicate a lot of
the wm calculations for the cursor ddb allocation case, which doens't
appeal to me.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
If the minimum required ddb space for all the planes equals the
total ddb space available we are allowed to use the relevant
watermark level.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
To allow unsetting .is_mobile for the desktop variant
of PNV fix up the cdclk code to select the mobile HPLLVCO register
for both PNV variants.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-5-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We want to allow the desktop PNV to not have .is_mobile set. To
that end let's add a small helper to determine if the platform
has the ASLE interrupt (or equivalent). Supposdely both PNV
variants have it.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-4-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add a small helper to determine if we have the panel power
sequencer or not. We'll make PNV an exceptional case so
that we can unset .is_mobile for the desktop variant.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-3-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Make the code self-documenting by introducing i9xx_has_pfit().
Also make PNV an exceptional case so that we can unset
.is_mobile for the desktop variant.
v2: s/gen4/gen>=4/ (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319142329.22881-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
g33/i964g/g45 are the exceptional cases when it comes to
the swizzle detection. Let's reorder the code to handle
them first and let everything else be handled by the
else branch. This allows us to unset .is_mobile for the
desktop PNV variant (which supposedly must follow the
"mobile" path here).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Exercise acquiring and releasing forcewake around register reads. In
order to read a register behind a GT powerwell, we need to instruct that
powerwell to wake up using a forcewake. When we no longer require the GT
powerwell, we tell the GT to release our forcewake. Inside the
forcewake, the register read should work but outside it should just
return garbage, 0 being the most common garbage. Thus we can detect when
we are inside and outside of the forcewake with just a simple register
read, and so can verify that the GT powerwell is released when we say
so.
v2: Picking the right forcewaked register to return 0 outside of
forcewake is an art.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320080052.27273-1-chris@chris-wilson.co.uk
Comet Lake is a Intel Processor containing Gen9
Intel HD Graphics. This patch adds the initial set of
PCI IDs. Comet Lake comes off of Coffee Lake - adding
the IDs to Coffee Lake ID list.
More support and features will be in the patches that follow.
v2: Split IDs according to GT. (Rodrigo)
v3: Update IDs.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318200133.9666-1-anusha.srivatsa@intel.com
There is probably a issue in DMC firmwares(icl_dmc_ver1_07.bin and
kbl_dmc_ver1_04.bin at least) that causes PSR2 SU to fail after
exiting DC6 if EDP_PSR_TP1_TP3_SEL is kept in PSR_CTL, so for now
lets workaround the issue by cleaning PSR_CTL before enable PSR2.
v2:
- Updated commit description and comment to state that it may be
a DMC firmware issue (Rodrigo)
- No need to RMW, let's write 0 to PSR_CTL(Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314230113.6571-1-jose.souza@intel.com
Rather than try to maintain some magic relationship between the link
rates and the index into the wrpll params array let's just store
the link rate in the array itself. Much less fragile.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-13-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We already have the code to calculate the WRPLL output clock from
the register values, but for some reason we're only using it for
HDMI and not DP. Throw out the inflexible DP DPLL table lookup and
just call the HDMI code which decodes the actual register values.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-12-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
For virtual engines, we need to keep the HW context alive while it
remains in use. For regular HW contexts, they are created and kept alive
until the end of the GEM context. For simplicity, generalise the
requirements and keep an active reference to each HW context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318212347.30146-2-chris@chris-wilson.co.uk
On unpinning the intel_context, we remove it from the active list
inside the GEM context. This list is supposed to be guarded by the GEM
context mutex, so remember to take it!
Fixes: 7e3d9a5941 ("drm/i915: Track active engines within a context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318212347.30146-1-chris@chris-wilson.co.uk
We no longer allow mixed C99 and kernel types, and the preference is to
use kernel types exclusively. Fix the C99 types that have crept in since
the mass conversion. No functional changes.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Kevin Strasser <kevin.strasser@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318160019.9309-1-jani.nikula@intel.com
As the final request on a ring may hold the reference to this ring (via
retiring the last pinned context), we may find ourselves chasing a
dangling pointer on completion of the list.
A quick solution is to hold a reference to the ring itself as we retire
along it so that we only free it after we stop dereferencing it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-4-chris@chris-wilson.co.uk
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.
Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
(cherry picked from commit 794a11cb67)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.
Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
(cherry picked from commit 9073e5b267)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.
Fixes: a98d9c1d7e ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
(cherry picked from commit 2131bc0ced)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we use the STORE_DATA_INDEX function we can use a fixed offset and
avoid having to lookup up the engine HWS address. A step closer to being
able to emit the final breadcrumb during request_add rather than later
in the submission interrupt handler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-9-chris@chris-wilson.co.uk
We must remember to actually enable the post CSC gamma if
we expect the legacy LUT to work. Seems to fix NV12 crc
tests on the SDR planes. Curiously we apparently managed to
get 100% match for the HDR planes even without chopping
off the low bits.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315195445.26527-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Slightly verbose, but does away with hand rolled shifts. Ties the field
values with the mask defining the field.
Unfortunately we have to make a local copy of FIELD_PREP() to evaluate
to a integer constant expression. But with this, we can ensure the mask
is non-zero, power of 2, fits u32, and the value fits the mask (when the
value is a constant expression).
Convert power sequencer registers as an example.
v4:
- rebase
v3:
- rename the macro to REG_FIELD_PREP to avoid underscore prefix and to
be in line with kernel macros (Chris)
- rename power of 2 check macro (Chris)
v2:
- add build-time checks with BUILD_BUG_ON_ZERO()
- rename to just _FIELD() due to regmap.h REG_FIELD() clash
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a844edda2afa6b54d9b12a6251da02c43ea8a942.1552657998.git.jani.nikula@intel.com
bitfield.h defines FIELD_GET() and FIELD_PREP() macros to access
bitfields using the mask alone, with no need for separate shift. Indeed,
the shift is redundant.
We define REG_FIELD_GET() and REG_FIELD_PREP() wrappers for the above,
in part to force u32 and for consistency with REG_BIT() and
REG_GENMASK(), but also as we'll need to redefine REG_FIELD_PREP() in
follow-up work to make it produce integer constant expressions.
For the most part, REG_FIELD_GET() is shorter than masking followed by
shift, and arguably has more clarity.
REG_FIELD_PREP() can get more verbose than simply shifting in place, but
it does provide masking to ensure we don't overflow the mask, something
we usually don't bother with currently.
Convert power sequencer registers as an example.
v3:
- temp variable removal (Chris)
- rebase
v2:
- Add the REG_FIELD_GET() and REG_FIELD_PREP() wrappers to use them
consistently from the start.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ab68f52e55e3961bde9458c0d85a12d98ef471df.1552657998.git.jani.nikula@intel.com
Introduce REG_BIT(n) to define register bits and REG_GENMASK(h, l) to
define register bitfield masks.
We define the above as wrappers to BIT() and GENMASK() respectively to
force u32 type to go with our register size, and to add compile time
checks on the bit numbers.
The intention is that these are easier to get right and review against
the spec than hand rolled masks.
Convert power sequencer registers as an example.
v4:
- rebase
v3:
- rename macros to REG_BIT() and REG_GENMASK() to avoid underscore
prefix and to be in line with kernel macros (Chris)
- add compile time checks (Mika)
v2:
- rename macros to just _BIT() and _MASK() to reduce verbosity
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787307c0ba9bc23471e5ff1e454b8af35771fa37.1552657998.git.jani.nikula@intel.com
We only need to acquire a wakeref for ourselves for a few operations, as
most either already acquire their own wakeref or imply a wakeref. In
particular, it is i915_gem_set_wedged() that needed us to present it
with a wakeref, which is incongruous with its "use anywhere" ability.
Suggested-by: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-7-chris@chris-wilson.co.uk
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.
Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
The only usage we have for it is for the regs pointer. Save a pointer to
the set and ack registers instead of the register offsets to remove this
requirement
v2: Keep passing uncore down to the lowest levels to avoid repeated
pointer chasing in the innermost loops:
add/remove: 0/0 grow/shrink: 3/15 up/down: 33/-155 (-122)
Function old new delta
fw_domain_init 320 351 +31
hdmi_port_clock_valid 319 320 +1
g4x_pre_enable_dp 364 365 +1
ring_request_alloc 1852 1851 -1
intel_engine_lookup_user 50 49 -1
gen11_irq_handler 738 737 -1
__intel_uncore_forcewake_get 115 112 -3
intel_uncore_fw_release_timer 198 194 -4
i915_forcewake_domains 154 150 -4
fw_domain_fini 172 168 -4
__intel_uncore_forcewake_put 163 159 -4
___force_wake_auto 138 134 -4
fw_domains_put 98 92 -6
__err_print_to_sgl 4058 4052 -6
intel_uncore_forcewake_reset 459 444 -15
fw_domains_get 563 548 -15
fw_domain_wait_ack_with_fallback 490 450 -40
fw_domains_get_with_fallback 875 828 -47
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313231319.711-2-daniele.ceraolospurio@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190316100045.20240-1-chris@chris-wilson.co.uk
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.
Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=vzKe
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes and updates from Dave Airlie:
"A few various fixes pulls and one late etnaviv pull but it was nearly
all fixes anyways.
etnaviv:
- late next pull
- mmu mapping fix
- build non-ARM arches
- misc fixes
i915:
- HDCP state handling fix
- shrinker interaction fix
- atomic state leak fix
qxl:
- kick out framebuffers early fix
amdgpu:
- Powerplay fixes
- DC fixes
- BACO turned off for now on vega20
- Locking fix
- KFD MQD fix
- gfx9 golden register updates"
* tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drm: (43 commits)
drm/amdgpu: Update gc golden setting for vega family
drm/amd/powerplay: correct power reading on fiji
drm/amd/powerplay: set max fan target temperature as 105C
drm/i915: Relax mmap VMA check
drm/i915: Fix atomic state leak when resetting HDMI link
drm/i915: Acquire breadcrumb ref before cancelling
drm/i915/selftests: Always free spinner on __sseu_prepare error
drm/i915: Reacquire priolist cache after dropping the engine lock
drm/i915: Protect i915_active iterators from the shrinker
drm/i915: HDCP state handling in ddi_update_pipe
drm/qxl: remove conflicting framebuffers earlier
drm/fb-helper: call vga_remove_vgacon automatically.
drm: move i915_kick_out_vgacon to vgaarb
drm/amd/display: don't call dm_pp_ function from an fpu block
drm: add __user attribute to ptr_to_compat()
drm/amdgpu: clear PDs/PTs only after initializing them
drm/amd/display: Pass app_tf by value rather than by reference
Revert "drm/amdgpu: use BACO reset on vega20 if platform support"
drm/amd/powerplay: show the right override pcie parameters
drm/amd/powerplay: honor the OD settings
...
Split the csc matrix handling to ilk+ and icl+ functions.
This keeps the logic clear on what is loaded into which
CSC unit on the hardware.
We also fix the icl+ code to load the full->limited range
conversion matrix into the output CSC rather than the pipe
CSC which was used on earlier platforms. And we also turn
on the pipe CSC only when the ctm is present.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Just provide precomputed CSC matrices for the identity and
limited range cases. This removes the remaining nuts and bolts
stuff from ilk_load_csc_matrix(), allowing one to actually
see the high level logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We have far too much messy duplicated code in the
pipe/output CSC programming. Simply provide two functions
(ilk_update_pipe_csc() and icl_update_output_csc()) to
program the relevant CSC registers. The desired offsets
and coefficients are passed in as parameters.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Like was done for MG and combo, now finish the per-type split of the
vfunc by moving TBT out of the combo functions. Now we can completely
remove icl_pll_id_to_enable_reg() since each PLL type passes all the
information via arguments.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-5-lucas.demarchi@intel.com
Create separate functions to 1) enable power, 2) write pll config, and
3) enable pll. Doing this it makes it easier to share the functions for
the different PLL types by passing the right arguments.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-3-lucas.demarchi@intel.com
Let's start using the vfuncs to differentiate MG and Combo PLLs. The end
goal is to decouple the type of the PLL from the IDs since the latter
are likely to change from one platform to another. This also makes the
code easier to read by not having lots of if/else chains on leaf
functions.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-2-lucas.demarchi@intel.com
The basic setup of the i915_hw_ppgtt is the same between gen6 and gen8,
so refactor that into a common routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-5-chris@chris-wilson.co.uk
Large ppGTT are differentiated by the requirement to go to four levels
to address more than 32b. Given the introduction of more 4 level ppGTT
with different sizes of addressable bits, rename i915_vm_is_48b() to
better reflect the commonality of using 4 levels.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-4-chris@chris-wilson.co.uk
With the introduction of the separate addressable bits into the device
info, we can remove the conflation of the ppgtt size from the ppgtt
type.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-3-chris@chris-wilson.co.uk
As the maximum addressable bits is determined by platform, record that
information in our static chipset tables. This has the advantage of
being clearly recorded in our capability dumps for dmesg, debugfs and
error states.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-2-chris@chris-wilson.co.uk
For compatibility reasons, we only care if the vGPU host provides
support for full-ppgtt. This is independent of the addressable memory
size, so remove the conflation of 48b from the capability name.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-1-chris@chris-wilson.co.uk
I just noticed that initial PCH comparative patch
left some >= PCH_ICP cases behind.
Let's also cover these cases and leave only the pin map
behind now.
No functional change. Hence no fixes tag.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313214307.26573-1-rodrigo.vivi@intel.com
Since both GPU reset and declaring the device wedged suspend ongoing
driver activity around a hard reset, we can reuse the same code to
reduce the likelihood of forgetting details surrounding reset from
either path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314084432.3740-1-chris@chris-wilson.co.uk
Adding the call to prepare for guc reset along with engine
reset. intel_uc_reset_prepare() calls to disable guc communication
and to sanitize.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307184445.25895-1-sujaritha.sundaresan@intel.com
- Split out some i915 code into the fb_helper to allow the above
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXIlYNQAKCRDj7w1vZxhR
xdsRAP0TnlDCQHcAY8U41jrWgSg2rNYNn/aT+PEXo7uoEy0AzwEAtv9tzk2309xn
wNT0c8wJU7l190VD8ZuikwT/19Y+pgw=
=3SKX
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-03-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- qxl: Remove the conflicting framebuffers earlier
- Split out some i915 code into the fb_helper to allow the above
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313192158.k3qssf733khsqodn@flea
When any other value than EDP_PSR_TP4_TIME_0US is set, TPS1 and TPS4
will be used to do the link training when exiting PSR1.
Happily the eDP panels tested so far was able to sync with source
even without HBR3/TPS4 support but let use the right training
pattern.
TPS4 support was added to PSR1 registers because HBR3/PSR
specification was not closed when ICL was freezed so if HBR3 was
supported by PSR, ICL would already be ready but it was not added to
specification so lets always disable TPS4.
v3: Missed ";" SPANK SPANK SPANK!!!
BSpec: 17524
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-3-jose.souza@intel.com
This will make hsw_activate_psr1() more easy to read and will make
future modification to TPS registers more easy to review and read.
v4: Rename new function to intel_psr1_get_tp_time() (Dhinakaran and
Rodrigo)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-2-jose.souza@intel.com
A new field with the training pattern(TP) wakeup time for PSR2 was
added to VBT, so lets use it when available otherwise it will
fallback to PSR1 wakeup time.
v2: replacing enum to numerical usec time (Jani)
BSpec: 20131
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-1-jose.souza@intel.com
In order to make it easier to bring up new platforms
without having to take care about all corner cases
that was previously taken care for previous platforms
we already use comparative INTEL_GEN statements.
Let's start doing the same with PCH.
The only caveats are:
- less-than comparisons need to be avoided or done with
attention and check > PCH_NONE as well.
- It is not necessarily a chronological order, but a matter
of south display compatibility/inheritance.
v2: Rebased on top of Jani's clean-up which removed the
need for less-than comparison
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-3-rodrigo.vivi@intel.com
So we can later use PCH >= comparisons. The ultimate goal
is to make it easier for us to introduce a new platform
with south display engine on PCH just by reusing the previous
one.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-2-rodrigo.vivi@intel.com
This exactly same approach was already used from gen9
to gen10 and from gen10 to gen11. Let's also use it
for gen11+.
Let's first assume that we inherit a similar platform
and than we apply the differences on top.
Different from the previous attempts this will be
done this time with coccinelle. We obviously need to
exclude some case that is really exclusive for gen11
like PCH, Firmware, and few others. Luckly this was
easy to filter by selecting the files we are touching
with coccinelle as exposed below:
spatch -sp_file gen11\+.cocci --in-place i915_perf.c \
intel_bios.c intel_cdclk.c intel_ddi.c \
intel_device_info.c intel_display.c intel_dpll_mgr.c \
intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c
@noticelake@ expression e; @@
-!IS_ICELAKE(e)
+INTEL_GEN(e) < 11
@notgen11@ expression e; @@
-!IS_GEN(e, 11)
+INTEL_GEN(e) < 11
@icelake@ expression e; @@
-IS_ICELAKE(e)
+INTEL_GEN(e) >= 11
@gen11@ expression e; @@
-IS_GEN(e, 11)
+INTEL_GEN(e) >= 11
No functional change.
v2: Remove intel_lrc.c per Tvrtko request since those were w/a
for ICL hw issuea and media related configuration.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com
We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.
Fixes: a98d9c1d7e ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
64 bpp half float formats are supported on hdr planes only and are subject
to the following restrictions:
* 90/270 rotation not supported
* Yf Tiling not supported
* Frame Buffer Compression not supported
* Color Keying not supported
v2:
- Drop handling pixel normalize register
- Don't use icl_is_hdr_plane too early
v3:
- Use refactored icl_is_hdr_plane (Ville)
- Use u32 instead of uint32_t (Ville)
v6:
- Rebase and fix merge conflicts
- Reorganize switch statements to keep RGB grouped separately from YUV
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-4-git-send-email-kevin.strasser@intel.com
Change the api in order to enable callers that can't supply a valid
intel_plane pointer, as would be the case prior to calling
drm_universal_plane_init.
v4:
- Rename variables and move a declaration (Ville)
v6:
- Rebase and fix merge conflict
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-3-git-send-email-kevin.strasser@intel.com
Move the pair of messages to the common callsite where it makes sense to
include a bit more information about which request is being reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
Setting the pixel rounding bit to 1 in PIPE_CHICKEN register allows
to passthrough FB pixels unmodified across pipe. This fixes the failures
for DP link layer compliance tests 4.4.1.1, 4.4.1.2 & 4.4.1.3.
(Lineage #1605353570)
v2: This is also needed to fix failing IGT test case kms_cursor_crc on
ICL.(Mika Kahola)
Make macros consistent with i915_reg.h comments.(Jani Nikula)
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307021412.18626-1-aditya.swarup@intel.com
References: https://bugs.freedesktop.org/show_bug.cgi?id=103232
In the next patch, we will want to update live state within a context.
As this state may be in use by the GPU and we haven't been explicitly
tracking its activity, we instead attach it to a request we send down
the context setup with its new state and on retiring that request
cleanup the old state as we then know that it is no longer live.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309160250.29324-1-chris@chris-wilson.co.uk
It is debatable whether having an error message on suspend for forcibly
cancelling outstanding work is worthwhile. We want to know if it occurs
in the wild (as we will then have to reconsider the approach!), but
equally is not fatal across suspend, as upon resume we automatically
clear the wedged status.
However, CI does trigger this scenario with gem_eio/suspend; as there we
are intentionally wedging the device upon suspend. The dilemma is how
not to trigger a failure report for the dmesg spam, for which the
quickest response is to suppress the warning in the kernel. I'd rather
mark it as accepted in gem_eio, but for now detecting when gem_eio is
playing games and cancelling the warning for that case seems a barely
acceptable hack.
Testcase: igt/gem_eio/suspend
Reference: 5861b013e2 ("drm/i915: Do a synchronous switch-to-kernel-context on idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308134512.19115-1-chris@chris-wilson.co.uk
The support for PSR2 was polished, IGT tests for PSR2 was added and
it was tested performing regular user workloads like browsing,
editing documents and compiling Linux, so it is time to enable it by
default and enjoy even more power-savings.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-9-jose.souza@intel.com
If PSR1 is active when pipe CRC is enabled the CRC calculations will
be inhibit by the transition to low power states that PSR1 brings.
So lets force a PSR1 exit and as soon as pipe CRC is enabled it will
block PSR1 activation and avoid CRC timeouts when running IGT tests.
There is a little window between the call to force exit PSR and the
write to pipe CRC registers that needs to happen within the minimum
of 6 idles frames otherwise PSR1 will be active again causing the CRC
timeouts but anyways this will at least reduce the occurrence of CRC
timeouts.
This can possibily fix issues present right now but I did not found
any open, I mostly got this issue from previous CI runs of this
series, bellow some exambles:
* igt@kms_color@pipe-b-ctm-0-75:
- shard-apl: PASS -> FAIL +9
* igt@kms_cursor_legacy@flip-vs-cursor-busy-crc-legacy:
- shard-apl: PASS -> DMESG-FAIL +17
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt:
- shard-kbl: PASS -> DMESG-FAIL +12
* igt@kms_pipe_crc_basic@read-crc-pipe-c:
- shard-kbl: PASS -> FAIL +7
v6: s/PSR/PSR1 (Dhinakaran)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-8-jose.souza@intel.com
All of this checks are redudant and can be removed as the if bellow
already takes care when there is no changes in the state.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-7-jose.souza@intel.com
When PSR2 is active aka after the number of frames programmed in
PSR2_CTL 'Frames Before SU Entry' hardware stops to generate CRC
interrupts causing IGT tests to fail due timeout.
This same behavior don't happen with PSR1, as soon as pipe CRC is
enabled it blocks PSR1 activation so CRC calculation continues to
happens normaly.
This patch also set mode_changed as true when PSR is available to
force atomic check functions to compute new PSR state, otherwise PSR2
would not be disabled.
v4: Only setting mode_changed if has_psr is set(Dhinakaran)
v3: Reusing intel_crtc_crc_prepare() and crc_enabled, only setting
mode_changed if it can do PSR.
v2: Changed commit description to describe that PSR2 inhibit CRC
calculations.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-6-jose.souza@intel.com
Other features like PSR2 also needs to be disabled while getting CRC
so lets rename ips_force_disable to crc_enabled, drop all this checks
for pipe A and HSW and BDW and make it generic and
hsw_compute_ips_config() will take care of all the checks removed
from here.
v2: Renaming and parameter changes to the functions that prepares the
commit (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-5-jose.souza@intel.com
If has_psr is set it means that CRTC has a EDP panel attached so the
EDP check is redundant and can be dropped.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-4-jose.souza@intel.com
In any commit, intel_modeset_pipe_config() will initialilly clear
and then recalculate most of the pipe states but it leave intel
specific color features states in reset state.
If after intel_pipe_config_compare() is detected that a fastset is
possible it will mark update_pipe as true and unsed mode_changed,
causing the color features state to be kept in reset state and then
latter being committed to hardware disabling the color features.
This issue can be reproduced by any code patch that duplicates the
actual(with color features already enabled) state and only mark
mode_changed as true.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-3-jose.souza@intel.com
Forcing a specific CRTC to the eDP connector was causing the
intel_psr_fastset_force() to mark mode_chaged in the wrong and
disabled CRTC causing no update in the PSR state.
Looks like our internal state track do not clear output_types and
has_psr in the disabled CRTCs, not sure if this is the expected
behavior or not but in the mean time this fix the issue.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-2-jose.souza@intel.com
Now we are checking sink capabilities when probing PSR DPCD register
and then dynamically checking in if new state is compatible with PSR
in, so this FIXME can be dropped.
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-1-jose.souza@intel.com
Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.
To avoid breaking legacy userspace relax the newly introduced fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 5c4604e757 ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adam Zabrocki <adamza@microsoft.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit a90e1948ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atomic state needs to be put even if the commit was successful.
Fixes: dba14b27dd ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-1-jose.souza@intel.com
(cherry picked from commit a551cd66bc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we allocate while iterating the rbtree of active nodes, we may hit
the shrinker and so retire the i915_active, reaping the rbtree. Modifying
the rbtree as we iterate is not good behaviour, so acquire the
i915_active first to keep the tree intact whenever we allocate.
Fixes: a42375af0a ("drm/i915: Release the active tracker tree upon idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208134704.23039-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 312c4ba1bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The downgrade of the fullmodeset into fastset
intel_encoder->update_pipe, in possible scenario, skips the En/Dis-able
DDI. Hence breaks the HDCP state change handling.
We also don't have any hdcp tests in CI, because the shard runs don't
have hdcp capable outputs :-/
So this change fixs it by handling the HDCP state change request at
intel_encoder->update_pipe too along with enable and disable of the DDI.
Fixes: d19f958db2 ("drm/i915: Enable fastset for non-boot modesets.")
v2:
Added commit id that broke the HDCP [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
cc: Hans de Goede <hdegoede@redhat.com>
cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1549295080-18353-1-git-send-email-ramalingam.c@intel.com
(cherry picked from commit 634852d1f4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----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=GlRQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for the 5.1 merge window.
The big changes I'd highlight are:
- nouveau has HMM support now, there is finally an in-tree user so we
can quieten down the rip it out people.
- i915 now enables fastboot by default on Skylake+
- Displayport Multistream support has been refactored and should
hopefully be more reliable.
Core:
- header cleanups aiming towards removing drmP.h
- dma-buf fence seqnos to 64-bits
- common helper for DP mst hotplug for radeon,i915,amdgpu + new
refcounting scheme
- MST i2c improvements
- drm_syncobj_cb removal
- ARM FB compression fourcc
- P010 + P016 fourcc
- allwinner tiled format modifier
- i2c over aux I2C_M_STOP support
- DRM_AUTH handling fixes
TTM:
- ref/unref renaming
New driver:
- ARM komeda display driver
scheduler:
- refactor mirror list handling
- rework hw fence processing
- 0 run queue entity fix
bridge:
- TI DS90C185 LVDS bridge
- thc631lvdm83d bridge improvements
- cadence + allwinner DSI ported to generic phy
panels:
- Sitronix ST7701 panel
- Kingdisplay KD097D04
- LeMaker BL035-RGB-002
- PDA 91-00156-A0
- Innolux EE101IA-01D
i915:
- Enable fastboot by default on SKL+/VLV/CHV
- Export RPCS configuration for ICL media driver
- Coffelake PCI ID
- CNL clocks setup fixes
- ACPI/PMIC support for MIPI/DSI
- Per-engine WA init for all engines
- Shrinker locking fixes
- Kerneldoc updates
- Lots of ring improvements and reset fixes
- Coffeelake GVT Support
- VFIO GVT EDID Region support
- runtime PM wakeref tracking
- ILK->IVB primary plane enable delays
- userptr mutex locking fixes
- DSI fixes
- LVDS/TV cleanups
- HW readout fixes
- LUT robustness fixes
- ICL display and watermark fixes
- gem mmap race fix
amdgpu:
- add scheduled dependencies interface
- DCC on scanout surfaces
- vega10/20 BACO support
- Multiple IH rings on soc15
- XGMI locking fixes
- DC i2c/aux cleanups
- runtime SMU debug interface
- Kexec improvmeents
- SR-IOV fixes
- DC freesync + ABM fixes
- GDS fixes
- GPUVM fixes
- vega20 PCIE DPM switching fixes
- Context priority handling fixes
radeon:
- fix missing break in evergreen parser
nouveau:
- SVM support via HMM
msm:
- QCOM Compressed modifier support
exynos:
- s5pv210 rotator support
imx:
- zpos property support
- pending update fixes
v3d:
- cache flush improvments
vc4:
- reflection support
- HDMI overscan support
tegra:
- CEC refactoring
- HDMI audio fixes
- Tegra186 prep work
- SOR crossbar device tree fixes
sun4i:
- implicit fencing support
- YUV and scalar support improvements
- A23 support
- tiling fixes
atmel-hlcdc:
- clipping and rotation property fixes
qxl:
- BO and PRIME improvements
- generic fbdev emulation
dw-hdmi:
- HDMI 2.0 2160p
- YUV420 ouput
rockchip:
- implicit fencing support
- reflection proerties
virtio-gpu:
- use generic fbdev emulation
tilcdc:
- cpufreq vs crtc init fix
rcar-du:
- R8A774C0 support
- D3/E3 RGB output routing fixes and DPAD0 support
- RA87744 LVDS support
bochs:
- atomic and generic fbdev emulation
- ID mismatch error on bochs load
meson:
- remove firmware fbs"
* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
drm/amd/display: Use vrr friendly pageflip throttling in DC.
drm/imx: only send commit done event when all state has been applied
drm/imx: allow building under COMPILE_TEST
drm/imx: imx-tve: depend on COMMON_CLK
drm/imx: ipuv3-plane: add zpos property
drm/imx: ipuv3-plane: add function to query atomic update status
gpu: ipu-v3: prg: add function to get channel configure status
gpu: ipu-v3: pre: add double buffer status readback
drm/amdgpu: Bump amdgpu version for context priority override.
drm/amdgpu/powerplay: fix typo in BACO header guards
drm/amdgpu/powerplay: fix return codes in BACO code
drm/amdgpu: add missing license on baco files
drm/bochs: Fix the ID mismatch error
drm/nouveau/dmem: use dma addresses during migration copies
drm/nouveau/dmem: use physical vram addresses during migration copies
drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
drm/nouveau/dmem: device memory helpers for SVM
drm/nouveau/svm: initial support for shared virtual memory
drm/nouveau: prepare for enabling svm with existing userspace interfaces
...
-----BEGIN PGP SIGNATURE-----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=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
Introduce a mutex to start locking the HW contexts independently of
struct_mutex, with a view to reducing the coarse struct_mutex. The
intel_context.pin_mutex is used to guard the transition to and from being
pinned on the gpu, and so is required before starting to build any
request. The intel_context will then remain pinned until the request
completes, but the mutex can be released immediately unpin completion of
pinning the context.
A slight variant of the above is used by per-context sseu that wants to
inspect the pinned status of the context, and requires that it remains
stable (either !pinned or pinned) across its operation. By using the
pin_mutex to serialise operations while pin_count==0, we can take that
pin_mutex for stabilise the boolean pin status.
v2: for Tvrtko!
* Improved commit message.
* Dropped _gpu suffix from gen8_modify_rpcs_gpu.
v3: Repair the locking for sseu selftests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-7-chris@chris-wilson.co.uk
Each engine acquires a pin on the kernel contexts (normal and preempt)
so that the logical state is always available on demand. Keep track of
each engines pin by storing the returned pointer on the engine for quick
access.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-6-chris@chris-wilson.co.uk
Push the intel_context pin callback down from intel_engine_cs onto the
context itself by virtue of having a central caller for
intel_context_pin() being able to lookup the intel_context itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-5-chris@chris-wilson.co.uk
In preparation for an ever growing number of engines and so ever
increasing static array of HW contexts within the GEM context, move the
array over to an rbtree, allocated upon first use.
Unfortunately, this imposes an rbtree lookup at a few frequent callsites,
but we should be able to mitigate those by moving over to using the HW
context as our primary type and so only incur the lookup on the boundary
with the user GEM context and engines.
v2: Check for no HW context in guc_stage_desc_init
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-4-chris@chris-wilson.co.uk
If we place a pointer to the engine specific intel_context_ops in the
engine itself, we can assign the ops pointer on initialising the
context, and then rely on it being set. This simplifies the code in
later patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-3-chris@chris-wilson.co.uk
This complex struct pulling in half the driver deserves its own
isolation in preparation for intel_context becoming an outright
complicated class of its own.
In order to split this beast into its own header also requests splitting
several of its dependent types and their dependencies into their own
headers as well.
v2: Add standalone compilation tests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-2-chris@chris-wilson.co.uk
Set pp_div field of struct pps_registers to INVALID_MMIO_REG when the
register isn't there, and use i915_mmio_reg_valid() instead of repeating
the condition all over the place.
Use INVALID_MMIO_REG explicitly for documentation purposes, even if the
value is unchanged from 0.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-2-jani.nikula@intel.com
PPS locking is a thing on pre-DDI, up to and including CPT and PPT.
The PPS divisor register exists up to gen 9 BC, replaced by a field in
the control register starting from gen 9 LP, i.e. BXT, GLK, and CNP on.
Commit b0a08bec96 ("drm/i915/bxt: eDP Panel Power sequencing") stopped
using the divisor register, but inadvertently conflated the PPS unlock
in the change. No longer doing the unlocking was the right thing to do,
however we should've stopped already at LPT (or DDI platforms).
Deconflate the two.
Arguably this could be moved away from here altogether, but this is the
minimally intrusive change for now.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-1-jani.nikula@intel.com
We can no longer assume execution ordering, and in particular we cannot
assume which context will execute last. One side-effect of this is that
we cannot determine if the kernel-context is resident on the GPU, so
remove the routines that claimed to do so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-4-chris@chris-wilson.co.uk
Currently we assume that we know the order in which requests run and so
can determine if we need to reissue a switch-to-kernel-context prior to
idling. That assumption does not hold for the future, so instead of
tracking which barriers have been used, simply determine if we have ever
switched away from the kernel context by using the engine and before
idling ensure that all engines that have been used since the last idle
are synchronously switched back to the kernel context for safety (and
else of shrinking memory while idle).
v2: Use intel_engine_mask_t and ALL_ENGINES
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-3-chris@chris-wilson.co.uk
We load a context (the kernel context) on both module load and resume in
order to initialise some logical state onto the GPU. We can use the same
routine for both operations, which will become more useful as we
refactor rc6/rps enabling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-2-chris@chris-wilson.co.uk
When the system idles, we switch to the kernel context as a defensive
measure (no users are harmed if the kernel context is lost). Currently,
we issue a switch to kernel context and then come back later to see if
the kernel context is still current and the system is idle. However,
if we are no longer privy to the runqueue ordering, then we have to
relax our assumptions about the logical state of the GPU and the only
way to ensure that the kernel context is currently loaded is by issuing
a request to run after all others, and wait for it to complete all while
preventing anyone else from issuing their own requests.
v2: Pull wedging into switch_to_kernel_context_sync() but only after
waiting (though only for the same short delay) for the active context to
finish.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-1-chris@chris-wilson.co.uk
Pretend that we have only 1 DBuf slice and that 1 slice is always
enabled, until we have a proper way for on-demand toggling of the second
slice. Currently we'll try to incorrectly enable DBuf even when all
pipes are disabled and we are already runtime suspended (as the computed
number of DBuf slices will be 1 in that case).
This also means we'll leave the second slice enabled redundantly (except
when suspended), but that's an acceptable tradeoff until we have a
proper solution.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108756
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307103235.23538-1-imre.deak@intel.com
We'll need to know the memory type in the system for some
bandwidth limitations and whatnot. Let's read that out on
gen9+.
v2: Rebase
v3: Fix the copy paste fail in the BXT bit definitions (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-13-ville.syrjala@linux.intel.com
We'll need information about the memory configuration on cnl+ too.
Extend the code to parse the slightly changed register layout.
v2: Document what cnl_get_dimm_size() returns (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-12-ville.syrjala@linux.intel.com
Remove the pointless zero initialization of bunch of things
(the thing is kzalloc()ed).
Also throw out the mostly useless on-stack string. I think
it'll be clear enough from the logs that 0 means unknown.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-11-ville.syrjala@linux.intel.com
The BXT DUNIT register tells us the size of each DRAM device
in Gb. We want to report the size of the whole DIMM in GB, so
that it matches how we report it for non-LP platforms.
v2: Deobfuscate the math (Chris)
s/GB/GBIT/ in the register bit definitions (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-6-ville.syrjala@linux.intel.com
Pass the dimm struct to skl_is_16gb_dimm() rather than passing each
value separately. And let's replace the hardcoded set of values with
some simple arithmetic.
Also fix the byte vs. bit inconsistency in the debug message,
and polish the wording otherwise as well.
v2: Deobfuscate the math (Chris)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-4-ville.syrjala@linux.intel.com
Make the code less repetitive by extracting a few small helpers.
v2: Squash in the switch removal for skl_get_dimm_ranks()
(it got misplaced in a rebase accident)
Document what skl_get_dimm_size() returns (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-3-ville.syrjala@linux.intel.com
Now with the watermarks fixes merged, Icelake is stable enough to
have the alpha support protection flag removed.
We have a few ICL machines in our CI and it is mostly green with
failures in tests that will not impact future linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.
As a reminder i915.alpha_support was created to protect
future linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.
Specifically, alpha support says nothing about the development
state of the hardware, and everything about the state of the
driver in a kernel release.
This is semantically no different from the old
preliminary_hw_support flag, but the old one was all too often
interpreted as (preliminary hw) support instead of the intended
(preliminary) hw support, and it was misleading for everyone.
Hence the rename.
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-y.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-iclb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305221153.359-1-jose.souza@intel.com
To facilitate the next patch to allow preemptible kernels not to incur
the wrath of hangcheck, we need to ensure that we can still suspend and
shutdown. That is we will not be able to rely on hangcheck to terminate
a blocking kernel and instead must manually do so ourselves. The
advantage is that we can apply more pressure!
As we now perform a GPU reset to clean up any residual kernels, we leave
the GPU in an unknown state and in particular can not talk to the GuC
before we reinitialise it following resume. For example, we no longer
need to tell the GuC to suspend itself, as it is already reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307104530.21745-2-chris@chris-wilson.co.uk
Currently we use HZ/5 for detecting a dead gpu on startup, and we will
wish to reuse this value for detecting a dead gpu on suspend, so convert
it into a macro for later convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307104530.21745-1-chris@chris-wilson.co.uk
Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they asked
me to do as the MEI driver is starting to interact with the i915 driver,
and it needed some coordination. All of those patches have been
properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
9e3l7H76oe33o96Qjhor
=8A2k
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they
asked me to do as the MEI driver is starting to interact with the i915
driver, and it needed some coordination. All of those patches have
been properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time"
* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
habanalabs: adjust Kconfig to fix build errors
habanalabs: use %px instead of %p in error print
habanalabs: use do_div for 64-bit divisions
intel_th: gth: Fix an off-by-one in output unassigning
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: use NULL to initialize array of pointers
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: soft-reset device if context-switch fails
habanalabs: print pointer using %p
habanalabs: fix memory leak with CBs with unaligned size
habanalabs: return correct error code on MMU mapping failure
habanalabs: add comments in uapi/misc/habanalabs.h
habanalabs: extend QMAN0 job timeout
habanalabs: set DMA0 completion to SOB 1007
habanalabs: fix validation of WREG32 to DMA completion
habanalabs: fix mmu cache registers init
habanalabs: disable CPU access on timeouts
habanalabs: add MMU DRAM default page mapping
habanalabs: Dissociate RAZWI info from event types
misc/habanalabs: adjust Kconfig to fix build errors
...
- Update the PM-runtime framework to use ktime instead of
jiffies for accounting (Thara Gopinath, Vincent Guittot).
- Optimize the autosuspend code in the PM-runtime framework
somewhat (Ladislav Michl).
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla).
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki).
- Add Jacobsville support to the intel_idle driver (Zhang Rui).
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam).
- Add new cpufreq driver for Armada 8K (Gregory Clement).
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar,
Amit Kucheria).
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar).
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria).
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar).
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang).
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki).
- Clean up multiple cpufreq drivers (Yangtao Li).
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn).
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann,
Matthias Kaehlcke).
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui).
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar).
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TSKG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are PM-runtime framework changes to use ktime instead of jiffies
for accounting, new PM core flag to mark devices that don't need any
form of power management, cpuidle updates including driver API
documentation and a new governor, cpufreq updates including a new
driver for Armada 8K, thermal cleanups and more, some energy-aware
scheduling (EAS) enabling changes, new chips support in the intel_idle
and RAPL drivers and assorted cleanups in some other places.
Specifics:
- Update the PM-runtime framework to use ktime instead of jiffies for
accounting (Thara Gopinath, Vincent Guittot)
- Optimize the autosuspend code in the PM-runtime framework somewhat
(Ladislav Michl)
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla)
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki)
- Add Jacobsville support to the intel_idle driver (Zhang Rui)
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)
- Add new cpufreq driver for Armada 8K (Gregory Clement)
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
Kucheria)
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria)
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar)
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang)
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki)
- Clean up multiple cpufreq drivers (Yangtao Li)
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn)
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
Kaehlcke)
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui)
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar)
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"
* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
cpufreq: Pass updated policy to driver ->setpolicy() callback
cpufreq: Fix two debug messages in cpufreq_set_policy()
cpufreq: Reorder and simplify cpufreq_update_policy()
cpufreq: Add kerneldoc comments for two core functions
PM / core: Add support to skip power management in device/driver model
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
cpufreq: intel_pstate: Avoid redundant initialization of local vars
powercap/intel_rapl: add Ice Lake mobile
ACPI / processor: Set P_LVL{2,3} idle state descriptions
cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
ACPI / CPPC: Add a helper to get desired performance
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
..
