linux_dsm_epyc7002/arch/arm/boot/dts/am572x-idk.dts

/*
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "dra74x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
#include "dra74x-mmc-iodelay.dtsi"

/ {
	model = "TI AM5728 IDK";
	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
		     "ti,dra7";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x80000000>;
	};

	status-leds {
		compatible = "gpio-leds";
		cpu0-led {
			label = "status0:red:cpu0";
			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "cpu0";
		};

		usr0-led {
			label = "status0:green:usr";
			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		heartbeat-led {
			label = "status0:blue:heartbeat";
			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "heartbeat";
		};

		cpu1-led {
			label = "status1:red:cpu1";
			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "cpu1";
		};

		usr1-led {
			label = "status1:green:usr";
			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		mmc0-led {
			label = "status1:blue:mmc0";
			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "mmc0";
		};
	};
};

&mmc1 {
	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
	pinctrl-0 = <&mmc1_pins_default>;
	pinctrl-1 = <&mmc1_pins_hs>;
	pinctrl-2 = <&mmc1_pins_sdr12>;
	pinctrl-3 = <&mmc1_pins_sdr25>;
	pinctrl-4 = <&mmc1_pins_sdr50>;
	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};

&mmc2 {
	pinctrl-names = "default", "hs", "ddr_1_8v";
	pinctrl-0 = <&mmc2_pins_default>;
	pinctrl-1 = <&mmc2_pins_hs>;
	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};

&omap_dwc3_2 {
	extcon = <&extcon_usb2>;
};

&extcon_usb2 {
	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};

&sn65hvs882 {
	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};

&pcie1_rc {
	status = "okay";
	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};

&pcie1_ep {
	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};

&mailbox5 {
	status = "okay";
	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
		status = "okay";
	};
	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
		status = "okay";
	};
};

&mailbox6 {
	status = "okay";
	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
		status = "okay";
	};
	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
		status = "okay";
	};
};