linux_dsm_epyc7002/drivers/net/wireless/iwlwifi/dvm/mac80211.c

1637 lines
42 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/ieee80211_radiotap.h>
#include <net/mac80211.h>
#include <asm/div64.h>
#include "iwl-io.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "calib.h"
#include "agn.h"
/*****************************************************************************
*
* mac80211 entry point functions
*
*****************************************************************************/
static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = {
{
.max = 1,
.types = BIT(NL80211_IFTYPE_STATION),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_AP),
},
};
static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = {
{
.max = 2,
.types = BIT(NL80211_IFTYPE_STATION),
},
};
static const struct ieee80211_iface_combination
iwlagn_iface_combinations_dualmode[] = {
{ .num_different_channels = 1,
.max_interfaces = 2,
.beacon_int_infra_match = true,
.limits = iwlagn_sta_ap_limits,
.n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits),
},
{ .num_different_channels = 1,
.max_interfaces = 2,
.limits = iwlagn_2sta_limits,
.n_limits = ARRAY_SIZE(iwlagn_2sta_limits),
},
};
/*
* Not a mac80211 entry point function, but it fits in with all the
* other mac80211 functions grouped here.
*/
int iwlagn_mac_setup_register(struct iwl_priv *priv,
const struct iwl_ucode_capabilities *capa)
{
int ret;
struct ieee80211_hw *hw = priv->hw;
struct iwl_rxon_context *ctx;
hw->rate_control_algorithm = "iwl-agn-rs";
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_QUEUE_CONTROL |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
IEEE80211_HW_WANT_MONITOR_VIF;
hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE;
hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT;
/*
* Including the following line will crash some AP's. This
* workaround removes the stimulus which causes the crash until
* the AP software can be fixed.
hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
*/
if (priv->nvm_data->sku_cap_11n_enable)
hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
/*
* Enable 11w if advertised by firmware and software crypto
* is not enabled (as the firmware will interpret some mgmt
* packets, so enabling it with software crypto isn't safe)
*/
if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_MFP &&
!iwlwifi_mod_params.sw_crypto)
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
hw->sta_data_size = sizeof(struct iwl_station_priv);
hw->vif_data_size = sizeof(struct iwl_vif_priv);
for_each_context(priv, ctx) {
hw->wiphy->interface_modes |= ctx->interface_modes;
hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
}
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
hw->wiphy->iface_combinations =
iwlagn_iface_combinations_dualmode;
hw->wiphy->n_iface_combinations =
ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
}
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 04:15:29 +07:00
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
REGULATORY_DISABLE_BEACON_HINTS;
#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
priv->trans->ops->d3_suspend &&
priv->trans->ops->d3_resume &&
device_can_wakeup(priv->trans->dev)) {
priv->wowlan_support.flags = WIPHY_WOWLAN_MAGIC_PKT |
WIPHY_WOWLAN_DISCONNECT |
WIPHY_WOWLAN_EAP_IDENTITY_REQ |
WIPHY_WOWLAN_RFKILL_RELEASE;
if (!iwlwifi_mod_params.sw_crypto)
priv->wowlan_support.flags |=
WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
WIPHY_WOWLAN_GTK_REKEY_FAILURE;
priv->wowlan_support.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS;
priv->wowlan_support.pattern_min_len =
IWLAGN_WOWLAN_MIN_PATTERN_LEN;
priv->wowlan_support.pattern_max_len =
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
hw->wiphy->wowlan = &priv->wowlan_support;
}
#endif
if (iwlwifi_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a max-length SSID element */
hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 34;
/*
* We don't use all queues: 4 and 9 are unused and any
* aggregation queue gets mapped down to the AC queue.
*/
hw->queues = IWLAGN_FIRST_AMPDU_QUEUE;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->nvm_data->bands[IEEE80211_BAND_2GHZ];
if (priv->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->nvm_data->bands[IEEE80211_BAND_5GHZ];
hw->wiphy->hw_version = priv->trans->hw_id;
iwl_leds_init(priv);
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
iwl_leds_exit(priv);
return ret;
}
priv->mac80211_registered = 1;
return 0;
}
void iwlagn_mac_unregister(struct iwl_priv *priv)
{
if (!priv->mac80211_registered)
return;
iwl_leds_exit(priv);
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
}
static int __iwl_up(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
int ret;
lockdep_assert_held(&priv->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
for_each_context(priv, ctx) {
ret = iwlagn_alloc_bcast_station(priv, ctx);
if (ret) {
iwl_dealloc_bcast_stations(priv);
return ret;
}
}
ret = iwl_run_init_ucode(priv);
if (ret) {
IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
goto error;
}
ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR);
if (ret) {
IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
goto error;
}
ret = iwl_alive_start(priv);
if (ret)
goto error;
return 0;
error:
set_bit(STATUS_EXIT_PENDING, &priv->status);
iwl_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->status);
IWL_ERR(priv, "Unable to initialize device.\n");
return ret;
}
static int iwlagn_mac_start(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
ret = __iwl_up(priv);
mutex_unlock(&priv->mutex);
if (ret)
return ret;
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
/* Now we should be done, and the READY bit should be set. */
if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
ret = -EIO;
iwlagn_led_enable(priv);
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
static void iwlagn_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!priv->is_open)
return;
priv->is_open = 0;
mutex_lock(&priv->mutex);
iwl_down(priv);
mutex_unlock(&priv->mutex);
iwl_cancel_deferred_work(priv);
flush_workqueue(priv->workqueue);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_gtk_rekey_data *data)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
if (iwlwifi_mod_params.sw_crypto)
return;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif)
goto out;
memcpy(priv->kek, data->kek, NL80211_KEK_LEN);
memcpy(priv->kck, data->kck, NL80211_KCK_LEN);
priv->replay_ctr =
cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr));
priv->have_rekey_data = true;
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
#ifdef CONFIG_PM_SLEEP
static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
int ret;
if (WARN_ON(!wowlan))
return -EINVAL;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
/* Don't attempt WoWLAN when not associated, tear down instead. */
if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION ||
!iwl_is_associated_ctx(ctx)) {
ret = 1;
goto out;
}
ret = iwlagn_suspend(priv, wowlan);
if (ret)
goto error;
/* let the ucode operate on its own */
iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
iwlwifi: mvm: implement D3 testing For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-14 18:53:45 +07:00
iwl_trans_d3_suspend(priv->trans, false);
goto out;
error:
priv->wowlan = false;
iwlagn_prepare_restart(priv);
ieee80211_restart_hw(priv->hw);
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
struct iwl_resume_data {
struct iwl_priv *priv;
struct iwlagn_wowlan_status *cmd;
bool valid;
};
static bool iwl_resume_status_fn(struct iwl_notif_wait_data *notif_wait,
struct iwl_rx_packet *pkt, void *data)
{
struct iwl_resume_data *resume_data = data;
struct iwl_priv *priv = resume_data->priv;
if (iwl_rx_packet_payload_len(pkt) != sizeof(*resume_data->cmd)) {
IWL_ERR(priv, "rx wrong size data\n");
return true;
}
memcpy(resume_data->cmd, pkt->data, sizeof(*resume_data->cmd));
resume_data->valid = true;
return true;
}
static int iwlagn_mac_resume(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct ieee80211_vif *vif;
u32 base;
int ret;
enum iwl_d3_status d3_status;
struct error_table_start {
/* cf. struct iwl_error_event_table */
u32 valid;
u32 error_id;
} err_info;
struct iwl_notification_wait status_wait;
static const u8 status_cmd[] = {
REPLY_WOWLAN_GET_STATUS,
};
struct iwlagn_wowlan_status status_data = {};
struct iwl_resume_data resume_data = {
.priv = priv,
.cmd = &status_data,
.valid = false,
};
struct cfg80211_wowlan_wakeup wakeup = {
.pattern_idx = -1,
};
#ifdef CONFIG_IWLWIFI_DEBUGFS
const struct fw_img *img;
#endif
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
/* we'll clear ctx->vif during iwlagn_prepare_restart() */
vif = ctx->vif;
iwlwifi: mvm: implement D3 testing For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-14 18:53:45 +07:00
ret = iwl_trans_d3_resume(priv->trans, &d3_status, false);
if (ret)
goto out_unlock;
if (d3_status != IWL_D3_STATUS_ALIVE) {
IWL_INFO(priv, "Device was reset during suspend\n");
goto out_unlock;
}
/* uCode is no longer operating by itself */
iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
base = priv->device_pointers.error_event_table;
if (!iwlagn_hw_valid_rtc_data_addr(base)) {
IWL_WARN(priv, "Invalid error table during resume!\n");
goto out_unlock;
}
iwl_trans_read_mem_bytes(priv->trans, base,
&err_info, sizeof(err_info));
if (err_info.valid) {
IWL_INFO(priv, "error table is valid (%d, 0x%x)\n",
err_info.valid, err_info.error_id);
if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) {
wakeup.rfkill_release = true;
ieee80211_report_wowlan_wakeup(vif, &wakeup,
GFP_KERNEL);
}
goto out_unlock;
}
#ifdef CONFIG_IWLWIFI_DEBUGFS
img = &priv->fw->img[IWL_UCODE_WOWLAN];
if (!priv->wowlan_sram)
priv->wowlan_sram =
kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len,
GFP_KERNEL);
if (priv->wowlan_sram)
iwl_trans_read_mem(priv->trans, 0x800000,
priv->wowlan_sram,
img->sec[IWL_UCODE_SECTION_DATA].len / 4);
#endif
/*
* This is very strange. The GET_STATUS command is sent but the device
* doesn't reply properly, it seems it doesn't close the RBD so one is
* always left open ... As a result, we need to send another command
* and have to reset the driver afterwards. As we need to switch to
* runtime firmware again that'll happen.
*/
iwl_init_notification_wait(&priv->notif_wait, &status_wait, status_cmd,
ARRAY_SIZE(status_cmd), iwl_resume_status_fn,
&resume_data);
iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_GET_STATUS, CMD_ASYNC, 0, NULL);
iwl_dvm_send_cmd_pdu(priv, REPLY_ECHO, CMD_ASYNC, 0, NULL);
/* an RBD is left open in the firmware now! */
ret = iwl_wait_notification(&priv->notif_wait, &status_wait, HZ/5);
if (ret)
goto out_unlock;
if (resume_data.valid && priv->contexts[IWL_RXON_CTX_BSS].vif) {
u32 reasons = le32_to_cpu(status_data.wakeup_reason);
struct cfg80211_wowlan_wakeup *wakeup_report;
IWL_INFO(priv, "WoWLAN wakeup reason(s): 0x%.8x\n", reasons);
if (reasons) {
if (reasons & IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET)
wakeup.magic_pkt = true;
if (reasons & IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH)
wakeup.pattern_idx = status_data.pattern_number;
if (reasons & (IWLAGN_WOWLAN_WAKEUP_BEACON_MISS |
IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE))
wakeup.disconnect = true;
if (reasons & IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL)
wakeup.gtk_rekey_failure = true;
if (reasons & IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ)
wakeup.eap_identity_req = true;
if (reasons & IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE)
wakeup.four_way_handshake = true;
wakeup_report = &wakeup;
} else {
wakeup_report = NULL;
}
ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL);
}
priv->wowlan = false;
iwlagn_prepare_restart(priv);
memset((void *)&ctx->active, 0, sizeof(ctx->active));
iwl_connection_init_rx_config(priv, ctx);
iwlagn_set_rxon_chain(priv, ctx);
out_unlock:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
ieee80211_resume_disconnect(vif);
return 1;
}
static void iwlagn_mac_set_wakeup(struct ieee80211_hw *hw, bool enabled)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
device_set_wakeup_enable(priv->trans->dev, enabled);
}
#endif
static void iwlagn_mac_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
if (iwlagn_tx_skb(priv, control->sta, skb))
ieee80211_free_txskb(hw, skb);
}
static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_key_conf *keyconf,
struct ieee80211_sta *sta,
u32 iv32, u16 *phase1key)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key);
}
static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
int ret;
bool is_default_wep_key = false;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (iwlwifi_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
switch (key->cipher) {
case WLAN_CIPHER_SUITE_TKIP:
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
/* fall through */
case WLAN_CIPHER_SUITE_CCMP:
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
break;
default:
break;
}
/*
* We could program these keys into the hardware as well, but we
* don't expect much multicast traffic in IBSS and having keys
* for more stations is probably more useful.
*
* Mark key TX-only and return 0.
*/
if (vif->type == NL80211_IFTYPE_ADHOC &&
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
key->hw_key_idx = WEP_INVALID_OFFSET;
return 0;
}
/* If they key was TX-only, accept deletion */
if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET)
return 0;
mutex_lock(&priv->mutex);
iwl_scan_cancel_timeout(priv, 100);
BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT);
/*
* If we are getting WEP group key and we didn't receive any key mapping
* so far, we are in legacy wep mode (group key only), otherwise we are
* in 1X mode.
* In legacy wep mode, we use another host command to the uCode.
*/
if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
if (cmd == SET_KEY)
is_default_wep_key = !ctx->key_mapping_keys;
else
is_default_wep_key =
key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT;
}
switch (cmd) {
case SET_KEY:
if (is_default_wep_key) {
ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
break;
}
ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta);
if (ret) {
/*
* can't add key for RX, but we don't need it
* in the device for TX so still return 0
*/
ret = 0;
key->hw_key_idx = WEP_INVALID_OFFSET;
}
IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
break;
case DISABLE_KEY:
if (is_default_wep_key)
ret = iwl_remove_default_wep_key(priv, ctx, key);
else
ret = iwl_remove_dynamic_key(priv, ctx, key, sta);
IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
break;
default:
ret = -EINVAL;
}
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
static inline bool iwl_enable_rx_ampdu(const struct iwl_cfg *cfg)
{
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
return false;
return true;
}
static inline bool iwl_enable_tx_ampdu(const struct iwl_cfg *cfg)
{
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
return false;
if (iwlwifi_mod_params.disable_11n & IWL_ENABLE_HT_TXAGG)
return true;
/* disabled by default */
return false;
}
static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
int ret = -EINVAL;
struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
sta->addr, tid);
if (!(priv->nvm_data->sku_cap_11n_enable))
return -EACCES;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
switch (action) {
case IEEE80211_AMPDU_RX_START:
if (!iwl_enable_rx_ampdu(priv->cfg))
break;
IWL_DEBUG_HT(priv, "start Rx\n");
ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
break;
case IEEE80211_AMPDU_RX_STOP:
IWL_DEBUG_HT(priv, "stop Rx\n");
ret = iwl_sta_rx_agg_stop(priv, sta, tid);
break;
case IEEE80211_AMPDU_TX_START:
if (!priv->trans->ops->txq_enable)
break;
if (!iwl_enable_tx_ampdu(priv->cfg))
break;
IWL_DEBUG_HT(priv, "start Tx\n");
ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
break;
case IEEE80211_AMPDU_TX_STOP_FLUSH:
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
IWL_DEBUG_HT(priv, "Flush Tx\n");
ret = iwlagn_tx_agg_flush(priv, vif, sta, tid);
break;
case IEEE80211_AMPDU_TX_STOP_CONT:
IWL_DEBUG_HT(priv, "stop Tx\n");
ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
if ((ret == 0) && (priv->agg_tids_count > 0)) {
priv->agg_tids_count--;
IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
priv->agg_tids_count);
}
if (!priv->agg_tids_count &&
priv->hw_params.use_rts_for_aggregation) {
/*
* switch off RTS/CTS if it was previously enabled
*/
sta_priv->lq_sta.lq.general_params.flags &=
~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
&sta_priv->lq_sta.lq, CMD_ASYNC, false);
}
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
ret = iwlagn_tx_agg_oper(priv, vif, sta, tid, buf_size);
break;
}
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
bool is_ap = vif->type == NL80211_IFTYPE_STATION;
int ret;
u8 sta_id;
IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
sta->addr);
sta_priv->sta_id = IWL_INVALID_STATION;
atomic_set(&sta_priv->pending_frames, 0);
if (vif->type == NL80211_IFTYPE_AP)
sta_priv->client = true;
ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
is_ap, sta, &sta_id);
if (ret) {
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
return ret;
}
sta_priv->sta_id = sta_id;
return 0;
}
static int iwlagn_mac_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
int ret;
IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", sta->addr);
if (vif->type == NL80211_IFTYPE_STATION) {
/*
* Station will be removed from device when the RXON
* is set to unassociated -- just deactivate it here
* to avoid re-programming it.
*/
ret = 0;
iwl_deactivate_station(priv, sta_priv->sta_id, sta->addr);
} else {
ret = iwl_remove_station(priv, sta_priv->sta_id, sta->addr);
if (ret)
IWL_DEBUG_QUIET_RFKILL(priv,
"Error removing station %pM\n", sta->addr);
}
return ret;
}
static int iwlagn_mac_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
enum ieee80211_sta_state old_state,
enum ieee80211_sta_state new_state)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
enum {
NONE, ADD, REMOVE, HT_RATE_INIT, ADD_RATE_INIT,
} op = NONE;
int ret;
IWL_DEBUG_MAC80211(priv, "station %pM state change %d->%d\n",
sta->addr, old_state, new_state);
mutex_lock(&priv->mutex);
if (vif->type == NL80211_IFTYPE_STATION) {
if (old_state == IEEE80211_STA_NOTEXIST &&
new_state == IEEE80211_STA_NONE)
op = ADD;
else if (old_state == IEEE80211_STA_NONE &&
new_state == IEEE80211_STA_NOTEXIST)
op = REMOVE;
else if (old_state == IEEE80211_STA_AUTH &&
new_state == IEEE80211_STA_ASSOC)
op = HT_RATE_INIT;
} else {
if (old_state == IEEE80211_STA_AUTH &&
new_state == IEEE80211_STA_ASSOC)
op = ADD_RATE_INIT;
else if (old_state == IEEE80211_STA_ASSOC &&
new_state == IEEE80211_STA_AUTH)
op = REMOVE;
}
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
if (ret)
break;
/*
* Clear the in-progress flag, the AP station entry was added
* but we'll initialize LQ only when we've associated (which
* would also clear the in-progress flag). This is necessary
* in case we never initialize LQ because association fails.
*/
spin_lock_bh(&priv->sta_lock);
priv->stations[iwl_sta_id(sta)].used &=
~IWL_STA_UCODE_INPROGRESS;
spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
break;
case ADD_RATE_INIT:
ret = iwlagn_mac_sta_add(hw, vif, sta);
if (ret)
break;
/* Initialize rate scaling */
IWL_DEBUG_INFO(priv,
"Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, iwl_sta_id(sta));
ret = 0;
break;
case HT_RATE_INIT:
/* Initialize rate scaling */
ret = iwl_sta_update_ht(priv, vif_priv->ctx, sta);
if (ret)
break;
IWL_DEBUG_INFO(priv,
"Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, iwl_sta_id(sta));
ret = 0;
break;
default:
ret = 0;
break;
}
/*
* mac80211 might WARN if we fail, but due the way we
* (badly) handle hard rfkill, we might fail here
*/
if (iwl_is_rfkill(priv))
ret = 0;
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = ch_switch->chandef.chan;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
/*
* MULTI-FIXME
* When we add support for multiple interfaces, we need to
* revisit this. The channel switch command in the device
* only affects the BSS context, but what does that really
* mean? And what if we get a CSA on the second interface?
* This needs a lot of work.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
u16 ch;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
if (iwl_is_rfkill(priv))
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status) ||
test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
if (!priv->lib->set_channel_switch)
goto out;
ch = channel->hw_value;
if (le16_to_cpu(ctx->active.channel) == ch)
goto out;
priv->current_ht_config.smps = conf->smps_mode;
/* Configure HT40 channels */
switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
ctx->ht.is_40mhz = false;
ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
break;
case NL80211_CHAN_HT40MINUS:
ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
ctx->ht.is_40mhz = true;
break;
case NL80211_CHAN_HT40PLUS:
ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
ctx->ht.is_40mhz = true;
break;
}
if ((le16_to_cpu(ctx->staging.channel) != ch))
ctx->staging.flags = 0;
iwl_set_rxon_channel(priv, channel, ctx);
iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif);
/*
* at this point, staging_rxon has the
* configuration for channel switch
*/
set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
priv->switch_channel = cpu_to_le16(ch);
if (priv->lib->set_channel_switch(priv, ch_switch)) {
clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
priv->switch_channel = 0;
ieee80211_chswitch_done(ctx->vif, false);
}
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
{
/*
* MULTI-FIXME
* See iwlagn_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULL If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [<ffffffff8130924d>] strnlen+0xd/0x40 Call Trace: [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0 [<ffffffff8130bf99>] vsnprintf+0x219/0x640 [<ffffffff8130c481>] vscnprintf+0x11/0x30 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0 [<ffffffff81657bd5>] printk+0x61/0x63 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm] [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm] [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581 Cc: stable@vger.kernel.org Reported-by: Lukasz Jagiello <jagiello.lukasz@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-26 20:29:09 +07:00
if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
return;
if (ctx->vif)
ieee80211_chswitch_done(ctx->vif, is_success);
}
static void iwlagn_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
__le32 filter_or = 0, filter_nand = 0;
struct iwl_rxon_context *ctx;
#define CHK(test, flag) do { \
if (*total_flags & (test)) \
filter_or |= (flag); \
else \
filter_nand |= (flag); \
} while (0)
IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
changed_flags, *total_flags);
CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
/* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
#undef CHK
mutex_lock(&priv->mutex);
for_each_context(priv, ctx) {
ctx->staging.filter_flags &= ~filter_nand;
ctx->staging.filter_flags |= filter_or;
/*
* Not committing directly because hardware can perform a scan,
* but we'll eventually commit the filter flags change anyway.
*/
}
mutex_unlock(&priv->mutex);
/*
* Receiving all multicast frames is always enabled by the
* default flags setup in iwl_connection_init_rx_config()
* since we currently do not support programming multicast
* filters into the device.
*/
*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
static void iwlagn_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u32 queues, bool drop)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
goto done;
}
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
goto done;
}
/*
* mac80211 will not push any more frames for transmit
* until the flush is completed
*/
if (drop) {
IWL_DEBUG_MAC80211(priv, "send flush command\n");
if (iwlagn_txfifo_flush(priv, 0)) {
IWL_ERR(priv, "flush request fail\n");
goto done;
}
}
IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff);
done:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_rssi_event rssi_event)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
if (priv->lib->bt_params &&
priv->lib->bt_params->advanced_bt_coexist) {
if (rssi_event == RSSI_EVENT_LOW)
priv->bt_enable_pspoll = true;
else if (rssi_event == RSSI_EVENT_HIGH)
priv->bt_enable_pspoll = false;
iwlagn_send_advance_bt_config(priv);
} else {
IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled,"
"ignoring RSSI callback\n");
}
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static int iwlagn_mac_set_tim(struct ieee80211_hw *hw,
struct ieee80211_sta *sta, bool set)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
queue_work(priv->workqueue, &priv->beacon_update);
return 0;
}
static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
int q;
if (WARN_ON(!ctx))
return -EINVAL;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
return -EIO;
}
if (queue >= AC_NUM) {
IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
return 0;
}
q = AC_NUM - 1 - queue;
mutex_lock(&priv->mutex);
ctx->qos_data.def_qos_parm.ac[q].cw_min =
cpu_to_le16(params->cw_min);
ctx->qos_data.def_qos_parm.ac[q].cw_max =
cpu_to_le16(params->cw_max);
ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
ctx->qos_data.def_qos_parm.ac[q].edca_txop =
cpu_to_le16((params->txop * 32));
ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0;
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
return priv->ibss_manager == IWL_IBSS_MANAGER;
}
static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
iwl_connection_init_rx_config(priv, ctx);
iwlagn_set_rxon_chain(priv, ctx);
return iwlagn_commit_rxon(priv, ctx);
}
static int iwl_setup_interface(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
struct ieee80211_vif *vif = ctx->vif;
int err, ac;
lockdep_assert_held(&priv->mutex);
/*
* This variable will be correct only when there's just
* a single context, but all code using it is for hardware
* that supports only one context.
*/
priv->iw_mode = vif->type;
ctx->is_active = true;
err = iwl_set_mode(priv, ctx);
if (err) {
if (!ctx->always_active)
ctx->is_active = false;
return err;
}
if (priv->lib->bt_params && priv->lib->bt_params->advanced_bt_coexist &&
vif->type == NL80211_IFTYPE_ADHOC) {
/*
* pretend to have high BT traffic as long as we
* are operating in IBSS mode, as this will cause
* the rate scaling etc. to behave as intended.
*/
priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
}
/* set up queue mappings */
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
vif->hw_queue[ac] = ctx->ac_to_queue[ac];
if (vif->type == NL80211_IFTYPE_AP)
vif->cab_queue = ctx->mcast_queue;
else
vif->cab_queue = IEEE80211_INVAL_HW_QUEUE;
return 0;
}
static int iwlagn_mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *tmp, *ctx = NULL;
int err;
enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif);
bool reset = false;
IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
viftype, vif->addr);
mutex_lock(&priv->mutex);
if (!iwl_is_ready_rf(priv)) {
IWL_WARN(priv, "Try to add interface when device not ready\n");
err = -EINVAL;
goto out;
}
for_each_context(priv, tmp) {
u32 possible_modes =
tmp->interface_modes | tmp->exclusive_interface_modes;
if (tmp->vif) {
/* On reset we need to add the same interface again */
if (tmp->vif == vif) {
reset = true;
ctx = tmp;
break;
}
/* check if this busy context is exclusive */
if (tmp->exclusive_interface_modes &
BIT(tmp->vif->type)) {
err = -EINVAL;
goto out;
}
continue;
}
if (!(possible_modes & BIT(viftype)))
continue;
/* have maybe usable context w/o interface */
ctx = tmp;
break;
}
if (!ctx) {
err = -EOPNOTSUPP;
goto out;
}
vif_priv->ctx = ctx;
ctx->vif = vif;
/*
* In SNIFFER device type, the firmware reports the FCS to
* the host, rather than snipping it off. Unfortunately,
* mac80211 doesn't (yet) provide a per-packet flag for
* this, so that we have to set the hardware flag based
* on the interfaces added. As the monitor interface can
* only be present by itself, and will be removed before
* other interfaces are added, this is safe.
*/
if (vif->type == NL80211_IFTYPE_MONITOR)
priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
else
priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
err = iwl_setup_interface(priv, ctx);
if (!err || reset)
goto out;
ctx->vif = NULL;
priv->iw_mode = NL80211_IFTYPE_STATION;
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return err;
}
static void iwl_teardown_interface(struct iwl_priv *priv,
struct ieee80211_vif *vif,
bool mode_change)
{
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
lockdep_assert_held(&priv->mutex);
if (priv->scan_vif == vif) {
iwl_scan_cancel_timeout(priv, 200);
iwl_force_scan_end(priv);
}
if (!mode_change) {
iwl_set_mode(priv, ctx);
if (!ctx->always_active)
ctx->is_active = false;
}
/*
* When removing the IBSS interface, overwrite the
* BT traffic load with the stored one from the last
* notification, if any. If this is a device that
* doesn't implement this, this has no effect since
* both values are the same and zero.
*/
if (vif->type == NL80211_IFTYPE_ADHOC)
priv->bt_traffic_load = priv->last_bt_traffic_load;
}
static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
if (WARN_ON(ctx->vif != vif)) {
struct iwl_rxon_context *tmp;
IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif);
for_each_context(priv, tmp)
IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n",
tmp->ctxid, tmp, tmp->vif);
}
ctx->vif = NULL;
iwl_teardown_interface(priv, vif, false);
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum nl80211_iftype newtype, bool newp2p)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_rxon_context *ctx, *tmp;
enum nl80211_iftype newviftype = newtype;
u32 interface_modes;
int err;
IWL_DEBUG_MAC80211(priv, "enter\n");
newtype = ieee80211_iftype_p2p(newtype, newp2p);
mutex_lock(&priv->mutex);
ctx = iwl_rxon_ctx_from_vif(vif);
/*
* To simplify this code, only support changes on the
* BSS context. The PAN context is usually reassigned
* by creating/removing P2P interfaces anyway.
*/
if (ctx->ctxid != IWL_RXON_CTX_BSS) {
err = -EBUSY;
goto out;
}
if (!ctx->vif || !iwl_is_ready_rf(priv)) {
/*
* Huh? But wait ... this can maybe happen when
* we're in the middle of a firmware restart!
*/
err = -EBUSY;
goto out;
}
/* Check if the switch is supported in the same context */
interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
if (!(interface_modes & BIT(newtype))) {
err = -EBUSY;
goto out;
}
if (ctx->exclusive_interface_modes & BIT(newtype)) {
for_each_context(priv, tmp) {
if (ctx == tmp)
continue;
if (!tmp->is_active)
continue;
/*
* The current mode switch would be exclusive, but
* another context is active ... refuse the switch.
*/
err = -EBUSY;
goto out;
}
}
/* success */
iwl_teardown_interface(priv, vif, true);
vif->type = newviftype;
vif->p2p = newp2p;
err = iwl_setup_interface(priv, ctx);
WARN_ON(err);
/*
* We've switched internally, but submitting to the
* device may have failed for some reason. Mask this
* error, because otherwise mac80211 will not switch
* (and set the interface type back) and we'll be
* out of sync with it.
*/
err = 0;
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return err;
}
static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_scan_request *req)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (req->n_channels == 0)
return -EINVAL;
mutex_lock(&priv->mutex);
/*
* If an internal scan is in progress, just set
* up the scan_request as per above.
*/
if (priv->scan_type != IWL_SCAN_NORMAL) {
IWL_DEBUG_SCAN(priv,
"SCAN request during internal scan - defer\n");
priv->scan_request = req;
priv->scan_vif = vif;
ret = 0;
} else {
priv->scan_request = req;
priv->scan_vif = vif;
/*
* mac80211 will only ask for one band at a time
* so using channels[0] here is ok
*/
ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
req->channels[0]->band);
if (ret) {
priv->scan_request = NULL;
priv->scan_vif = NULL;
}
}
IWL_DEBUG_MAC80211(priv, "leave\n");
mutex_unlock(&priv->mutex);
return ret;
}
static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
{
struct iwl_addsta_cmd cmd = {
.mode = STA_CONTROL_MODIFY_MSK,
.station_flags_msk = STA_FLG_PWR_SAVE_MSK,
.sta.sta_id = sta_id,
};
iwl_send_add_sta(priv, &cmd, CMD_ASYNC);
}
static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum sta_notify_cmd cmd,
struct ieee80211_sta *sta)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
int sta_id;
IWL_DEBUG_MAC80211(priv, "enter\n");
switch (cmd) {
case STA_NOTIFY_SLEEP:
WARN_ON(!sta_priv->client);
sta_priv->asleep = true;
if (atomic_read(&sta_priv->pending_frames) > 0)
ieee80211_sta_block_awake(hw, sta, true);
break;
case STA_NOTIFY_AWAKE:
WARN_ON(!sta_priv->client);
if (!sta_priv->asleep)
break;
sta_priv->asleep = false;
sta_id = iwl_sta_id(sta);
if (sta_id != IWL_INVALID_STATION)
iwl_sta_modify_ps_wake(priv, sta_id);
break;
default:
break;
}
IWL_DEBUG_MAC80211(priv, "leave\n");
}
const struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
.stop = iwlagn_mac_stop,
#ifdef CONFIG_PM_SLEEP
.suspend = iwlagn_mac_suspend,
.resume = iwlagn_mac_resume,
.set_wakeup = iwlagn_mac_set_wakeup,
#endif
.add_interface = iwlagn_mac_add_interface,
.remove_interface = iwlagn_mac_remove_interface,
.change_interface = iwlagn_mac_change_interface,
.config = iwlagn_mac_config,
.configure_filter = iwlagn_configure_filter,
.set_key = iwlagn_mac_set_key,
.update_tkip_key = iwlagn_mac_update_tkip_key,
.set_rekey_data = iwlagn_mac_set_rekey_data,
.conf_tx = iwlagn_mac_conf_tx,
.bss_info_changed = iwlagn_bss_info_changed,
.ampdu_action = iwlagn_mac_ampdu_action,
.hw_scan = iwlagn_mac_hw_scan,
.sta_notify = iwlagn_mac_sta_notify,
.sta_state = iwlagn_mac_sta_state,
.channel_switch = iwlagn_mac_channel_switch,
.flush = iwlagn_mac_flush,
.tx_last_beacon = iwlagn_mac_tx_last_beacon,
.rssi_callback = iwlagn_mac_rssi_callback,
.set_tim = iwlagn_mac_set_tim,
};
/* This function both allocates and initializes hw and priv. */
struct ieee80211_hw *iwl_alloc_all(void)
{
struct iwl_priv *priv;
struct iwl_op_mode *op_mode;
/* mac80211 allocates memory for this device instance, including
* space for this driver's private structure */
struct ieee80211_hw *hw;
hw = ieee80211_alloc_hw(sizeof(struct iwl_priv) +
sizeof(struct iwl_op_mode), &iwlagn_hw_ops);
if (!hw)
goto out;
op_mode = hw->priv;
priv = IWL_OP_MODE_GET_DVM(op_mode);
priv->hw = hw;
out:
return hw;
}