linux_dsm_epyc7002/drivers/gpu/drm/i915/i915_drv.c

704 lines
19 KiB
C
Raw Normal View History

/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/device.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_drv.h"
#include <linux/console.h>
#include "drm_crtc_helper.h"
static int i915_modeset = -1;
module_param_named(modeset, i915_modeset, int, 0400);
unsigned int i915_fbpercrtc = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
static struct drm_driver driver;
extern int intel_agp_enabled;
#define INTEL_VGA_DEVICE(id, info) { \
.class = PCI_CLASS_DISPLAY_VGA << 8, \
.class_mask = 0xffff00, \
.vendor = 0x8086, \
.device = id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.driver_data = (unsigned long) info }
static const struct intel_device_info intel_i830_info = {
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_845g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i85x_info = {
.gen = 2, .is_i85x = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i865g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915g_info = {
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915gm_info = {
.gen = 3, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1,
.has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i965g_info = {
.gen = 4, .is_broadwater = 1,
.has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_i965gm_info = {
.gen = 4, .is_crestline = 1,
.is_mobile = 1, .has_fbc = 1, .has_rc6 = 1, .has_hotplug = 1,
.has_overlay = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_g33_info = {
.gen = 3, .is_g33 = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_g45_info = {
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_gm45_info = {
.gen = 4, .is_g4x = 1,
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.supports_tv = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_pineview_info = {
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5,
.need_gfx_hws = 1, .has_pipe_cxsr = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_ironlake_m_info = {
.gen = 5, .is_mobile = 1,
.need_gfx_hws = 1, .has_rc6 = 1, .has_hotplug = 1,
.has_fbc = 0, /* disabled due to buggy hardware */
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_sandybridge_d_info = {
.gen = 6,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.gen = 6, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
INTEL_VGA_DEVICE(0x3577, &intel_i830_info), /* I830_M */
INTEL_VGA_DEVICE(0x2562, &intel_845g_info), /* 845_G */
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), /* I855_GM */
INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), /* I865_G */
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), /* I915_G */
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), /* E7221_G */
INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), /* I915_GM */
INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), /* I945_G */
INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), /* I945_GM */
INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), /* I945_GME */
INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), /* I946_GZ */
INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), /* G35_G */
INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), /* I965_Q */
INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), /* I965_G */
INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), /* Q35_G */
INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), /* G33_G */
INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), /* Q33_G */
INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), /* I965_GM */
INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), /* I965_GME */
INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), /* GM45_G */
INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), /* IGD_E_G */
INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), /* Q45_G */
INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), /* G45_G */
INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), /* G41_G */
INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), /* B43_G */
INTEL_VGA_DEVICE(0x2e92, &intel_g45_info), /* B43_G.1 */
INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
INTEL_VGA_DEVICE(0x0102, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0112, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0122, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0106, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0116, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0126, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x010A, &intel_sandybridge_d_info),
{0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
#define INTEL_PCH_DEVICE_ID_MASK 0xff00
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
void intel_detect_pch (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pch;
/*
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
* make graphics device passthrough work easy for VMM, that only
* need to expose ISA bridge to let driver know the real hardware
* underneath. This is a requirement from virtualization team.
*/
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (pch) {
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
int id;
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
}
}
pci_dev_put(pch);
}
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error = i915_gem_idle(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
drm_irq_uninstall(dev);
}
i915_save_state(dev);
intel_opregion_fini(dev);
/* Modeset on resume, not lid events */
dev_priv->modeset_on_lid = 0;
return 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 12:38:10 +07:00
int i915_suspend(struct drm_device *dev, pm_message_t state)
{
int error;
if (!dev || !dev->dev_private) {
DRM_ERROR("dev: %p\n", dev);
DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW)
return 0;
drm_kms_helper_poll_disable(dev);
error = i915_drm_freeze(dev);
if (error)
return error;
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
return 0;
}
static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
drm_irq_install(dev);
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
return error;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 12:38:10 +07:00
int i915_resume(struct drm_device *dev)
{
int ret;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
ret = i915_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
static int i8xx_do_reset(struct drm_device *dev, u8 flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_I85X(dev))
return -ENODEV;
I915_WRITE(D_STATE, I915_READ(D_STATE) | DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
if (IS_I830(dev) || IS_845G(dev)) {
I915_WRITE(DEBUG_RESET_I830,
DEBUG_RESET_DISPLAY |
DEBUG_RESET_RENDER |
DEBUG_RESET_FULL);
POSTING_READ(DEBUG_RESET_I830);
msleep(1);
I915_WRITE(DEBUG_RESET_I830, 0);
POSTING_READ(DEBUG_RESET_I830);
}
msleep(1);
I915_WRITE(D_STATE, I915_READ(D_STATE) & ~DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
return 0;
}
static int i965_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
return gdrst & 0x1;
}
static int i965_do_reset(struct drm_device *dev, u8 flags)
{
u8 gdrst;
/*
* Set the domains we want to reset (GRDOM/bits 2 and 3) as
* well as the reset bit (GR/bit 0). Setting the GR bit
* triggers the reset; when done, the hardware will clear it.
*/
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST, gdrst | flags | 0x1);
return wait_for(i965_reset_complete(dev), 500);
}
static int ironlake_do_reset(struct drm_device *dev, u8 flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, gdrst | flags | 0x1);
return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
}
/**
* i965_reset - reset chip after a hang
* @dev: drm device to reset
* @flags: reset domains
*
* Reset the chip. Useful if a hang is detected. Returns zero on successful
* reset or otherwise an error code.
*
* Procedure is fairly simple:
* - reset the chip using the reset reg
* - re-init context state
* - re-init hardware status page
* - re-init ring buffer
* - re-init interrupt state
* - re-init display
*/
int i915_reset(struct drm_device *dev, u8 flags)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/*
* We really should only reset the display subsystem if we actually
* need to
*/
bool need_display = true;
int ret;
mutex_lock(&dev->struct_mutex);
i915_gem_reset(dev);
ret = -ENODEV;
if (get_seconds() - dev_priv->last_gpu_reset < 5) {
DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
} else switch (INTEL_INFO(dev)->gen) {
case 5:
ret = ironlake_do_reset(dev, flags);
break;
case 4:
ret = i965_do_reset(dev, flags);
break;
case 2:
ret = i8xx_do_reset(dev, flags);
break;
}
dev_priv->last_gpu_reset = get_seconds();
if (ret) {
DRM_ERROR("Failed to reset chip.\n");
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* Ok, now get things going again... */
/*
* Everything depends on having the GTT running, so we need to start
* there. Fortunately we don't need to do this unless we reset the
* chip at a PCI level.
*
* Next we need to restore the context, but we don't use those
* yet either...
*
* Ring buffer needs to be re-initialized in the KMS case, or if X
* was running at the time of the reset (i.e. we weren't VT
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
!dev_priv->mm.suspended) {
struct intel_ring_buffer *ring = &dev_priv->render_ring;
dev_priv->mm.suspended = 0;
ring->init(ring);
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_irq_install(dev);
mutex_lock(&dev->struct_mutex);
}
mutex_unlock(&dev->struct_mutex);
/*
* Perform a full modeset as on later generations, e.g. Ironlake, we may
* need to retrain the display link and cannot just restore the register
* values.
*/
if (need_display) {
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
}
return 0;
}
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
return drm_get_pci_dev(pdev, ent, &driver);
}
static void
i915_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_put_dev(dev);
}
static int i915_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
int error;
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
error = i915_drm_freeze(drm_dev);
if (error)
return error;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int i915_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_resume(drm_dev);
}
static int i915_pm_freeze(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
return i915_drm_freeze(drm_dev);
}
static int i915_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_thaw(drm_dev);
}
static int i915_pm_poweroff(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_freeze(drm_dev);
}
static const struct dev_pm_ops i915_pm_ops = {
.suspend = i915_pm_suspend,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
.restore = i915_pm_resume,
};
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static struct drm_driver driver = {
/* don't use mtrr's here, the Xserver or user space app should
* deal with them for intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
.irq_preinstall = i915_driver_irq_preinstall,
.irq_postinstall = i915_driver_irq_postinstall,
.irq_uninstall = i915_driver_irq_uninstall,
.irq_handler = i915_driver_irq_handler,
.reclaim_buffers = drm_core_reclaim_buffers,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
#endif
.gem_init_object = i915_gem_init_object,
.gem_free_object = i915_gem_free_object,
.gem_vm_ops = &i915_gem_vm_ops,
.ioctls = i915_ioctls,
.fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
.mmap = drm_gem_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
.read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = i915_compat_ioctl,
#endif
.llseek = noop_llseek,
},
.pci_driver = {
.name = DRIVER_NAME,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
.driver.pm = &i915_pm_ops,
},
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static int __init i915_init(void)
{
if (!intel_agp_enabled) {
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
return -ENODEV;
}
driver.num_ioctls = i915_max_ioctl;
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
if (!(driver.driver_features & DRIVER_MODESET)) {
driver.suspend = i915_suspend;
driver.resume = i915_resume;
}
return drm_init(&driver);
}
static void __exit i915_exit(void)
{
drm_exit(&driver);
}
module_init(i915_init);
module_exit(i915_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");