linux_dsm_epyc7002/arch/x86/kernel/cpu/microcode/intel.c

954 lines
21 KiB
C
Raw Normal View History

/*
* Intel CPU Microcode Update Driver for Linux
*
* Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
* 2006 Shaohua Li <shaohua.li@intel.com>
*
* Intel CPU microcode early update for Linux
*
* Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
* H Peter Anvin" <hpa@zytor.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/*
* This needs to be before all headers so that pr_debug in printk.h doesn't turn
* printk calls into no_printk().
*
*#define DEBUG
*/
#define pr_fmt(fmt) "microcode: " fmt
#include <linux/earlycpio.h>
#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/initrd.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/mm.h>
#include <asm/microcode_intel.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/setup.h>
#include <asm/msr.h>
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin";
/* Current microcode patch used in early patching on the APs. */
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_intel *intel_ucode_patch;
static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1,
unsigned int s2, unsigned int p2)
{
if (s1 != s2)
return false;
/* Processor flags are either both 0 ... */
if (!p1 && !p2)
return true;
/* ... or they intersect. */
return p1 & p2;
}
/*
* Returns 1 if update has been found, 0 otherwise.
*/
static int find_matching_signature(void *mc, unsigned int csig, int cpf)
{
struct microcode_header_intel *mc_hdr = mc;
struct extended_sigtable *ext_hdr;
struct extended_signature *ext_sig;
int i;
if (cpu_signatures_match(csig, cpf, mc_hdr->sig, mc_hdr->pf))
return 1;
/* Look for ext. headers: */
if (get_totalsize(mc_hdr) <= get_datasize(mc_hdr) + MC_HEADER_SIZE)
return 0;
ext_hdr = mc + get_datasize(mc_hdr) + MC_HEADER_SIZE;
ext_sig = (void *)ext_hdr + EXT_HEADER_SIZE;
for (i = 0; i < ext_hdr->count; i++) {
if (cpu_signatures_match(csig, cpf, ext_sig->sig, ext_sig->pf))
return 1;
ext_sig++;
}
return 0;
}
/*
* Returns 1 if update has been found, 0 otherwise.
*/
static int has_newer_microcode(void *mc, unsigned int csig, int cpf, int new_rev)
{
struct microcode_header_intel *mc_hdr = mc;
if (mc_hdr->rev <= new_rev)
return 0;
return find_matching_signature(mc, csig, cpf);
}
/*
* Given CPU signature and a microcode patch, this function finds if the
* microcode patch has matching family and model with the CPU.
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
*
* %true - if there's a match
* %false - otherwise
*/
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static bool microcode_matches(struct microcode_header_intel *mc_header,
unsigned long sig)
{
unsigned long total_size = get_totalsize(mc_header);
unsigned long data_size = get_datasize(mc_header);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct extended_sigtable *ext_header;
unsigned int fam_ucode, model_ucode;
struct extended_signature *ext_sig;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
unsigned int fam, model;
int ext_sigcount, i;
fam = x86_family(sig);
model = x86_model(sig);
fam_ucode = x86_family(mc_header->sig);
model_ucode = x86_model(mc_header->sig);
if (fam == fam_ucode && model == model_ucode)
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return true;
/* Look for ext. headers: */
if (total_size <= data_size + MC_HEADER_SIZE)
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return false;
ext_header = (void *) mc_header + data_size + MC_HEADER_SIZE;
ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
ext_sigcount = ext_header->count;
for (i = 0; i < ext_sigcount; i++) {
fam_ucode = x86_family(ext_sig->sig);
model_ucode = x86_model(ext_sig->sig);
if (fam == fam_ucode && model == model_ucode)
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return true;
ext_sig++;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return false;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static struct ucode_patch *__alloc_microcode_buf(void *data, unsigned int size)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct ucode_patch *p;
p = kzalloc(sizeof(struct ucode_patch), GFP_KERNEL);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!p)
return ERR_PTR(-ENOMEM);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
p->data = kmemdup(data, size, GFP_KERNEL);
if (!p->data) {
kfree(p);
return ERR_PTR(-ENOMEM);
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return p;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static void save_microcode_patch(void *data, unsigned int size)
{
struct microcode_header_intel *mc_hdr, *mc_saved_hdr;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct ucode_patch *iter, *tmp, *p;
bool prev_found = false;
unsigned int sig, pf;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
mc_hdr = (struct microcode_header_intel *)data;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
list_for_each_entry_safe(iter, tmp, &microcode_cache, plist) {
mc_saved_hdr = (struct microcode_header_intel *)iter->data;
sig = mc_saved_hdr->sig;
pf = mc_saved_hdr->pf;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (find_matching_signature(data, sig, pf)) {
prev_found = true;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (mc_hdr->rev <= mc_saved_hdr->rev)
continue;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
p = __alloc_microcode_buf(data, size);
if (IS_ERR(p))
pr_err("Error allocating buffer %p\n", data);
else
list_replace(&iter->plist, &p->plist);
}
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
/*
* There weren't any previous patches found in the list cache; save the
* newly found.
*/
if (!prev_found) {
p = __alloc_microcode_buf(data, size);
if (IS_ERR(p))
pr_err("Error allocating buffer for %p\n", data);
else
list_add_tail(&p->plist, &microcode_cache);
}
}
static int microcode_sanity_check(void *mc, int print_err)
{
unsigned long total_size, data_size, ext_table_size;
struct microcode_header_intel *mc_header = mc;
struct extended_sigtable *ext_header = NULL;
u32 sum, orig_sum, ext_sigcount = 0, i;
struct extended_signature *ext_sig;
total_size = get_totalsize(mc_header);
data_size = get_datasize(mc_header);
if (data_size + MC_HEADER_SIZE > total_size) {
if (print_err)
pr_err("Error: bad microcode data file size.\n");
return -EINVAL;
}
if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
if (print_err)
pr_err("Error: invalid/unknown microcode update format.\n");
return -EINVAL;
}
ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
if (ext_table_size) {
u32 ext_table_sum = 0;
u32 *ext_tablep;
if ((ext_table_size < EXT_HEADER_SIZE)
|| ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
if (print_err)
pr_err("Error: truncated extended signature table.\n");
return -EINVAL;
}
ext_header = mc + MC_HEADER_SIZE + data_size;
if (ext_table_size != exttable_size(ext_header)) {
if (print_err)
pr_err("Error: extended signature table size mismatch.\n");
return -EFAULT;
}
ext_sigcount = ext_header->count;
/*
* Check extended table checksum: the sum of all dwords that
* comprise a valid table must be 0.
*/
ext_tablep = (u32 *)ext_header;
i = ext_table_size / sizeof(u32);
while (i--)
ext_table_sum += ext_tablep[i];
if (ext_table_sum) {
if (print_err)
pr_warn("Bad extended signature table checksum, aborting.\n");
return -EINVAL;
}
}
/*
* Calculate the checksum of update data and header. The checksum of
* valid update data and header including the extended signature table
* must be 0.
*/
orig_sum = 0;
i = (MC_HEADER_SIZE + data_size) / sizeof(u32);
while (i--)
orig_sum += ((u32 *)mc)[i];
if (orig_sum) {
if (print_err)
pr_err("Bad microcode data checksum, aborting.\n");
return -EINVAL;
}
if (!ext_table_size)
return 0;
/*
* Check extended signature checksum: 0 => valid.
*/
for (i = 0; i < ext_sigcount; i++) {
ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
EXT_SIGNATURE_SIZE * i;
sum = (mc_header->sig + mc_header->pf + mc_header->cksum) -
(ext_sig->sig + ext_sig->pf + ext_sig->cksum);
if (sum) {
if (print_err)
pr_err("Bad extended signature checksum, aborting.\n");
return -EINVAL;
}
}
return 0;
}
/*
* Get microcode matching with BSP's model. Only CPUs with the same model as
* BSP can stay in the platform.
*/
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static struct microcode_intel *
scan_microcode(void *data, size_t size, struct ucode_cpu_info *uci, bool save)
{
struct microcode_header_intel *mc_header;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_intel *patch = NULL;
unsigned int mc_size;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
while (size) {
if (size < sizeof(struct microcode_header_intel))
break;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
mc_header = (struct microcode_header_intel *)data;
mc_size = get_totalsize(mc_header);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!mc_size ||
mc_size > size ||
microcode_sanity_check(data, 0) < 0)
break;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
size -= mc_size;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!microcode_matches(mc_header, uci->cpu_sig.sig)) {
data += mc_size;
continue;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (save) {
save_microcode_patch(data, mc_size);
goto next;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!patch) {
if (!has_newer_microcode(data,
uci->cpu_sig.sig,
uci->cpu_sig.pf,
uci->cpu_sig.rev))
goto next;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
} else {
struct microcode_header_intel *phdr = &patch->hdr;
if (!has_newer_microcode(data,
phdr->sig,
phdr->pf,
phdr->rev))
goto next;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
/* We have a newer patch, save it. */
patch = data;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
next:
data += mc_size;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (size)
return NULL;
return patch;
}
static int collect_cpu_info_early(struct ucode_cpu_info *uci)
{
unsigned int val[2];
unsigned int family, model;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct cpu_signature csig = { 0 };
unsigned int eax, ebx, ecx, edx;
memset(uci, 0, sizeof(*uci));
eax = 0x00000001;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
csig.sig = eax;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
family = x86_family(eax);
model = x86_model(eax);
if ((model >= 5) || (family > 6)) {
/* get processor flags from MSR 0x17 */
native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
csig.pf = 1 << ((val[1] >> 18) & 7);
}
csig.rev = intel_get_microcode_revision();
uci->cpu_sig = csig;
uci->valid = 1;
return 0;
}
static void show_saved_mc(void)
{
#ifdef DEBUG
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
int i = 0, j;
unsigned int sig, pf, rev, total_size, data_size, date;
struct ucode_cpu_info uci;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct ucode_patch *p;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (list_empty(&microcode_cache)) {
pr_debug("no microcode data saved.\n");
return;
}
collect_cpu_info_early(&uci);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
sig = uci.cpu_sig.sig;
pf = uci.cpu_sig.pf;
rev = uci.cpu_sig.rev;
pr_debug("CPU: sig=0x%x, pf=0x%x, rev=0x%x\n", sig, pf, rev);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
list_for_each_entry(p, &microcode_cache, plist) {
struct microcode_header_intel *mc_saved_header;
struct extended_sigtable *ext_header;
struct extended_signature *ext_sig;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
int ext_sigcount;
mc_saved_header = (struct microcode_header_intel *)p->data;
sig = mc_saved_header->sig;
pf = mc_saved_header->pf;
rev = mc_saved_header->rev;
date = mc_saved_header->date;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
total_size = get_totalsize(mc_saved_header);
data_size = get_datasize(mc_saved_header);
pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, total size=0x%x, date = %04x-%02x-%02x\n",
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
i++, sig, pf, rev, total_size,
date & 0xffff,
date >> 24,
(date >> 16) & 0xff);
/* Look for ext. headers: */
if (total_size <= data_size + MC_HEADER_SIZE)
continue;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
ext_header = (void *)mc_saved_header + data_size + MC_HEADER_SIZE;
ext_sigcount = ext_header->count;
ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
for (j = 0; j < ext_sigcount; j++) {
sig = ext_sig->sig;
pf = ext_sig->pf;
pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n",
j, sig, pf);
ext_sig++;
}
}
#endif
}
/*
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
* Save this microcode patch. It will be loaded early when a CPU is
* hot-added or resumes.
*/
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static void save_mc_for_early(u8 *mc, unsigned int size)
{
#ifdef CONFIG_HOTPLUG_CPU
/* Synchronization during CPU hotplug. */
static DEFINE_MUTEX(x86_cpu_microcode_mutex);
mutex_lock(&x86_cpu_microcode_mutex);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
save_microcode_patch(mc, size);
show_saved_mc();
mutex_unlock(&x86_cpu_microcode_mutex);
#endif
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static bool load_builtin_intel_microcode(struct cpio_data *cp)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
unsigned int eax = 1, ebx, ecx = 0, edx;
char name[30];
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (IS_ENABLED(CONFIG_X86_32))
return false;
native_cpuid(&eax, &ebx, &ecx, &edx);
sprintf(name, "intel-ucode/%02x-%02x-%02x",
x86_family(eax), x86_model(eax), x86_stepping(eax));
return get_builtin_firmware(cp, name);
}
/*
* Print ucode update info.
*/
static void
print_ucode_info(struct ucode_cpu_info *uci, unsigned int date)
{
pr_info_once("microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n",
uci->cpu_sig.rev,
date & 0xffff,
date >> 24,
(date >> 16) & 0xff);
}
#ifdef CONFIG_X86_32
static int delay_ucode_info;
static int current_mc_date;
/*
* Print early updated ucode info after printk works. This is delayed info dump.
*/
void show_ucode_info_early(void)
{
struct ucode_cpu_info uci;
if (delay_ucode_info) {
collect_cpu_info_early(&uci);
print_ucode_info(&uci, current_mc_date);
delay_ucode_info = 0;
}
}
/*
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
* At this point, we can not call printk() yet. Delay printing microcode info in
* show_ucode_info_early() until printk() works.
*/
static void print_ucode(struct ucode_cpu_info *uci)
{
struct microcode_intel *mc;
int *delay_ucode_info_p;
int *current_mc_date_p;
mc = uci->mc;
if (!mc)
return;
delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
current_mc_date_p = (int *)__pa_nodebug(&current_mc_date);
*delay_ucode_info_p = 1;
*current_mc_date_p = mc->hdr.date;
}
#else
/*
* Flush global tlb. We only do this in x86_64 where paging has been enabled
* already and PGE should be enabled as well.
*/
static inline void flush_tlb_early(void)
{
__native_flush_tlb_global_irq_disabled();
}
static inline void print_ucode(struct ucode_cpu_info *uci)
{
struct microcode_intel *mc;
mc = uci->mc;
if (!mc)
return;
print_ucode_info(uci, mc->hdr.date);
}
#endif
static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
{
struct microcode_intel *mc;
u32 rev;
mc = uci->mc;
if (!mc)
return 0;
/* write microcode via MSR 0x79 */
native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
rev = intel_get_microcode_revision();
if (rev != mc->hdr.rev)
return -1;
#ifdef CONFIG_X86_64
/* Flush global tlb. This is precaution. */
flush_tlb_early();
#endif
uci->cpu_sig.rev = rev;
if (early)
print_ucode(uci);
else
print_ucode_info(uci, mc->hdr.date);
return 0;
}
int __init save_microcode_in_initrd_intel(void)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct ucode_cpu_info uci;
struct cpio_data cp;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!load_builtin_intel_microcode(&cp))
cp = find_microcode_in_initrd(ucode_path, false);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!(cp.data && cp.size))
return 0;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
collect_cpu_info_early(&uci);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
scan_microcode(cp.data, cp.size, &uci, true);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
show_saved_mc();
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return 0;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
/*
* @res_patch, output: a pointer to the patch we found.
*/
static struct microcode_intel *__load_ucode_intel(struct ucode_cpu_info *uci)
{
static const char *path;
struct cpio_data cp;
bool use_pa;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (IS_ENABLED(CONFIG_X86_32)) {
path = (const char *)__pa_nodebug(ucode_path);
use_pa = true;
} else {
path = ucode_path;
use_pa = false;
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
/* try built-in microcode first */
if (!load_builtin_intel_microcode(&cp))
cp = find_microcode_in_initrd(path, use_pa);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!(cp.data && cp.size))
return NULL;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
collect_cpu_info_early(uci);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return scan_microcode(cp.data, cp.size, uci, false);
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
void __init load_ucode_intel_bsp(void)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_intel *patch;
struct ucode_cpu_info uci;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
patch = __load_ucode_intel(&uci);
if (!patch)
return;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
uci.mc = patch;
apply_microcode_early(&uci, true);
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
void load_ucode_intel_ap(void)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_intel *patch, **iup;
struct ucode_cpu_info uci;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (IS_ENABLED(CONFIG_X86_32))
iup = (struct microcode_intel **) __pa_nodebug(&intel_ucode_patch);
else
iup = &intel_ucode_patch;
reget:
if (!*iup) {
patch = __load_ucode_intel(&uci);
if (!patch)
return;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
*iup = patch;
}
uci.mc = *iup;
if (apply_microcode_early(&uci, true)) {
/* Mixed-silicon system? Try to refetch the proper patch: */
*iup = NULL;
goto reget;
}
}
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
static struct microcode_intel *find_patch(struct ucode_cpu_info *uci)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_header_intel *phdr;
struct ucode_patch *iter, *tmp;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
list_for_each_entry_safe(iter, tmp, &microcode_cache, plist) {
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
phdr = (struct microcode_header_intel *)iter->data;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (phdr->rev <= uci->cpu_sig.rev)
continue;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!find_matching_signature(phdr,
uci->cpu_sig.sig,
uci->cpu_sig.pf))
continue;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
return iter->data;
}
return NULL;
}
void reload_ucode_intel(void)
{
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
struct microcode_intel *p;
struct ucode_cpu_info uci;
collect_cpu_info_early(&uci);
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
p = find_patch(&uci);
if (!p)
return;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
uci.mc = p;
apply_microcode_early(&uci, false);
}
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
static struct cpu_signature prev;
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
csig->sig = cpuid_eax(0x00000001);
if ((c->x86_model >= 5) || (c->x86 > 6)) {
/* get processor flags from MSR 0x17 */
rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
csig->pf = 1 << ((val[1] >> 18) & 7);
}
csig->rev = c->microcode;
/* No extra locking on prev, races are harmless. */
if (csig->sig != prev.sig || csig->pf != prev.pf || csig->rev != prev.rev) {
pr_info("sig=0x%x, pf=0x%x, revision=0x%x\n",
csig->sig, csig->pf, csig->rev);
prev = *csig;
}
return 0;
}
static int apply_microcode_intel(int cpu)
{
struct microcode_intel *mc;
struct ucode_cpu_info *uci;
struct cpuinfo_x86 *c;
static int prev_rev;
u32 rev;
/* We should bind the task to the CPU */
if (WARN_ON(raw_smp_processor_id() != cpu))
return -1;
uci = ucode_cpu_info + cpu;
mc = uci->mc;
x86/microcode: Rework microcode loading Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 16:55:21 +07:00
if (!mc) {
/* Look for a newer patch in our cache: */
mc = find_patch(uci);
if (!mc)
return 0;
}
/* write microcode via MSR 0x79 */
wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
rev = intel_get_microcode_revision();
if (rev != mc->hdr.rev) {
pr_err("CPU%d update to revision 0x%x failed\n",
cpu, mc->hdr.rev);
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
return -1;
}
if (rev != prev_rev) {
pr_info("updated to revision 0x%x, date = %04x-%02x-%02x\n",
rev,
mc->hdr.date & 0xffff,
mc->hdr.date >> 24,
(mc->hdr.date >> 16) & 0xff);
prev_rev = rev;
}
c = &cpu_data(cpu);
uci->cpu_sig.rev = rev;
c->microcode = rev;
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
return 0;
}
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
int (*get_ucode_data)(void *, const void *, size_t))
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL;
int new_rev = uci->cpu_sig.rev;
unsigned int leftover = size;
unsigned int curr_mc_size = 0, new_mc_size = 0;
unsigned int csig, cpf;
while (leftover) {
struct microcode_header_intel mc_header;
unsigned int mc_size;
if (leftover < sizeof(mc_header)) {
pr_err("error! Truncated header in microcode data file\n");
break;
}
if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
break;
mc_size = get_totalsize(&mc_header);
if (!mc_size || mc_size > leftover) {
pr_err("error! Bad data in microcode data file\n");
break;
}
/* For performance reasons, reuse mc area when possible */
if (!mc || mc_size > curr_mc_size) {
vfree(mc);
mc = vmalloc(mc_size);
if (!mc)
break;
curr_mc_size = mc_size;
}
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
microcode_sanity_check(mc, 1) < 0) {
break;
}
csig = uci->cpu_sig.sig;
cpf = uci->cpu_sig.pf;
if (has_newer_microcode(mc, csig, cpf, new_rev)) {
vfree(new_mc);
new_rev = mc_header.rev;
new_mc = mc;
new_mc_size = mc_size;
mc = NULL; /* trigger new vmalloc */
}
ucode_ptr += mc_size;
leftover -= mc_size;
}
vfree(mc);
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
if (leftover) {
vfree(new_mc);
return UCODE_ERROR;
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
}
if (!new_mc)
return UCODE_NFOUND;
vfree(uci->mc);
uci->mc = (struct microcode_intel *)new_mc;
/*
* If early loading microcode is supported, save this mc into
* permanent memory. So it will be loaded early when a CPU is hot added
* or resumes.
*/
save_mc_for_early(new_mc, new_mc_size);
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
return UCODE_OK;
}
static int get_ucode_fw(void *to, const void *from, size_t n)
{
memcpy(to, from, n);
return 0;
}
static enum ucode_state request_microcode_fw(int cpu, struct device *device,
bool refresh_fw)
{
char name[30];
struct cpuinfo_x86 *c = &cpu_data(cpu);
const struct firmware *firmware;
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
enum ucode_state ret;
sprintf(name, "intel-ucode/%02x-%02x-%02x",
c->x86, c->x86_model, c->x86_mask);
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
if (request_firmware_direct(&firmware, name, device)) {
pr_debug("data file %s load failed\n", name);
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
return UCODE_NFOUND;
}
ret = generic_load_microcode(cpu, (void *)firmware->data,
firmware->size, &get_ucode_fw);
release_firmware(firmware);
return ret;
}
static int get_ucode_user(void *to, const void *from, size_t n)
{
return copy_from_user(to, from, n);
}
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
}
static struct microcode_ops microcode_intel_ops = {
.request_microcode_user = request_microcode_user,
.request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info,
.apply_microcode = apply_microcode_intel,
};
struct microcode_ops * __init init_intel_microcode(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
cpu_has(c, X86_FEATURE_IA64)) {
pr_err("Intel CPU family 0x%x not supported\n", c->x86);
return NULL;
}
return &microcode_intel_ops;
}