linux_dsm_epyc7002/include/linux/irq.h

906 lines
28 KiB
C
Raw Normal View History

#ifndef _LINUX_IRQ_H
#define _LINUX_IRQ_H
/*
* Please do not include this file in generic code. There is currently
* no requirement for any architecture to implement anything held
* within this file.
*
* Thanks. --rmk
*/
#include <linux/smp.h>
#include <linux/linkage.h>
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/cpumask.h>
#include <linux/gfp.h>
#include <linux/irqhandler.h>
#include <linux/irqreturn.h>
#include <linux/irqnr.h>
#include <linux/errno.h>
#include <linux/topology.h>
#include <linux/wait.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/ptrace.h>
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
#include <asm/irq_regs.h>
struct seq_file;
struct module;
struct msi_msg;
genirq: Allow the irqchip state of an IRQ to be save/restored There is a number of cases where a kernel subsystem may want to introspect the state of an interrupt at the irqchip level: - When a peripheral is shared between virtual machines, its interrupt state becomes part of the guest's state, and must be switched accordingly. KVM on arm/arm64 requires this for its guest-visible timer - Some GPIO controllers seem to require peeking into the interrupt controller they are connected to to report their internal state This seem to be a pattern that is common enough for the core code to try and support this without too many horrible hacks. Introduce a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state) to retrieve the bits that can be of interest to another subsystem: pending, active, and masked. - irq_get_irqchip_state returns the state of the interrupt according to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE, IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL. - irq_set_irqchip_state similarly sets the state of the interrupt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Phong Vo <pvo@apm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tin Huynh <tnhuynh@apm.com> Cc: Y Vo <yvo@apm.com> Cc: Toan Le <toanle@apm.com> Cc: Bjorn Andersson <bjorn@kryo.se> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-18 18:01:22 +07:00
enum irqchip_irq_state;
/*
* IRQ line status.
[PATCH] irq-flags: consolidate flags for request_irq The recent interrupt rework introduced bit value conflicts with sparc. Instead of introducing new architecture flags mess, move the interrupt SA_ flags out of the signal namespace and replace them by interrupt related flags. This allows to remove the obsolete SA_INTERRUPT flag and clean up the bit field values. This patch: Move the interrupt related SA_ flags out of linux/signal.h and rename them to IRQF_ . This moves the interrupt related flags out of the signal namespace and allows to remove the architecture dependencies. SA_INTERRUPT is not needed by userspace and glibc so it can be removed safely. The existing SA_ constants are kept for easy transition and will be removed after a 6 month grace period. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Greg KH <greg@kroah.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Karsten Keil <kkeil@suse.de> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Dave Airlie <airlied@linux.ie> Cc: Jens Axboe <axboe@suse.de> Cc: Chris Zankel <chris@zankel.net> Cc: Andi Kleen <ak@muc.de> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David Howells <dhowells@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 09:29:03 +07:00
*
* Bits 0-7 are the same as the IRQF_* bits in linux/interrupt.h
*
* IRQ_TYPE_NONE - default, unspecified type
* IRQ_TYPE_EDGE_RISING - rising edge triggered
* IRQ_TYPE_EDGE_FALLING - falling edge triggered
* IRQ_TYPE_EDGE_BOTH - rising and falling edge triggered
* IRQ_TYPE_LEVEL_HIGH - high level triggered
* IRQ_TYPE_LEVEL_LOW - low level triggered
* IRQ_TYPE_LEVEL_MASK - Mask to filter out the level bits
* IRQ_TYPE_SENSE_MASK - Mask for all the above bits
* IRQ_TYPE_DEFAULT - For use by some PICs to ask irq_set_type
* to setup the HW to a sane default (used
* by irqdomain map() callbacks to synchronize
* the HW state and SW flags for a newly
* allocated descriptor).
*
* IRQ_TYPE_PROBE - Special flag for probing in progress
*
* Bits which can be modified via irq_set/clear/modify_status_flags()
* IRQ_LEVEL - Interrupt is level type. Will be also
* updated in the code when the above trigger
* bits are modified via irq_set_irq_type()
* IRQ_PER_CPU - Mark an interrupt PER_CPU. Will protect
* it from affinity setting
* IRQ_NOPROBE - Interrupt cannot be probed by autoprobing
* IRQ_NOREQUEST - Interrupt cannot be requested via
* request_irq()
* IRQ_NOTHREAD - Interrupt cannot be threaded
* IRQ_NOAUTOEN - Interrupt is not automatically enabled in
* request/setup_irq()
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
* IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable
* IRQ_IS_POLLED - Always polled by another interrupt. Exclude
* it from the spurious interrupt detection
* mechanism and from core side polling.
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
IRQ_TYPE_EDGE_RISING = 0x00000001,
IRQ_TYPE_EDGE_FALLING = 0x00000002,
IRQ_TYPE_EDGE_BOTH = (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
IRQ_TYPE_LEVEL_HIGH = 0x00000004,
IRQ_TYPE_LEVEL_LOW = 0x00000008,
IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
IRQ_TYPE_SENSE_MASK = 0x0000000f,
IRQ_TYPE_DEFAULT = IRQ_TYPE_SENSE_MASK,
IRQ_TYPE_PROBE = 0x00000010,
IRQ_LEVEL = (1 << 8),
IRQ_PER_CPU = (1 << 9),
IRQ_NOPROBE = (1 << 10),
IRQ_NOREQUEST = (1 << 11),
IRQ_NOAUTOEN = (1 << 12),
IRQ_NO_BALANCING = (1 << 13),
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
IRQ_NOTHREAD = (1 << 16),
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
IRQ_PER_CPU_DEVID = (1 << 17),
IRQ_IS_POLLED = (1 << 18),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID | \
IRQ_IS_POLLED)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
/*
* Return value for chip->irq_set_affinity()
*
* IRQ_SET_MASK_OK - OK, core updates irq_data.affinity
* IRQ_SET_MASK_NOCPY - OK, chip did update irq_data.affinity
* IRQ_SET_MASK_OK_DONE - Same as IRQ_SET_MASK_OK for core. Special code to
* support stacked irqchips, which indicates skipping
* all descendent irqchips.
*/
enum {
IRQ_SET_MASK_OK = 0,
IRQ_SET_MASK_OK_NOCOPY,
IRQ_SET_MASK_OK_DONE,
};
struct msi_desc;
struct irq_domain;
/**
* struct irq_common_data - per irq data shared by all irqchips
* @state_use_accessors: status information for irq chip functions.
* Use accessor functions to deal with it
*/
struct irq_common_data {
unsigned int state_use_accessors;
};
/**
* struct irq_data - per irq chip data passed down to chip functions
* @mask: precomputed bitmask for accessing the chip registers
* @irq: interrupt number
* @hwirq: hardware interrupt number, local to the interrupt domain
* @node: node index useful for balancing
* @common: point to data shared by all irqchips
* @chip: low level interrupt hardware access
* @domain: Interrupt translation domain; responsible for mapping
* between hwirq number and linux irq number.
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 21:20:14 +07:00
* @parent_data: pointer to parent struct irq_data to support hierarchy
* irq_domain
* @handler_data: per-IRQ data for the irq_chip methods
* @chip_data: platform-specific per-chip private data for the chip
* methods, to allow shared chip implementations
* @msi_desc: MSI descriptor
* @affinity: IRQ affinity on SMP
*
* The fields here need to overlay the ones in irq_desc until we
* cleaned up the direct references and switched everything over to
* irq_data.
*/
struct irq_data {
u32 mask;
unsigned int irq;
unsigned long hwirq;
unsigned int node;
struct irq_common_data *common;
struct irq_chip *chip;
struct irq_domain *domain;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 21:20:14 +07:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
struct irq_data *parent_data;
#endif
void *handler_data;
void *chip_data;
struct msi_desc *msi_desc;
cpumask_var_t affinity;
};
/*
* Bit masks for irq_common_data.state_use_accessors
*
* IRQD_TRIGGER_MASK - Mask for the trigger type bits
* IRQD_SETAFFINITY_PENDING - Affinity setting is pending
* IRQD_NO_BALANCING - Balancing disabled for this IRQ
* IRQD_PER_CPU - Interrupt is per cpu
* IRQD_AFFINITY_SET - Interrupt affinity was set
* IRQD_LEVEL - Interrupt is level triggered
* IRQD_WAKEUP_STATE - Interrupt is configured for wakeup
* from suspend
* IRDQ_MOVE_PCNTXT - Interrupt can be moved in process
* context
* IRQD_IRQ_DISABLED - Disabled state of the interrupt
* IRQD_IRQ_MASKED - Masked state of the interrupt
* IRQD_IRQ_INPROGRESS - In progress state of the interrupt
* IRQD_WAKEUP_ARMED - Wakeup mode armed
*/
enum {
IRQD_TRIGGER_MASK = 0xf,
IRQD_SETAFFINITY_PENDING = (1 << 8),
IRQD_NO_BALANCING = (1 << 10),
IRQD_PER_CPU = (1 << 11),
IRQD_AFFINITY_SET = (1 << 12),
IRQD_LEVEL = (1 << 13),
IRQD_WAKEUP_STATE = (1 << 14),
IRQD_MOVE_PCNTXT = (1 << 15),
IRQD_IRQ_DISABLED = (1 << 16),
IRQD_IRQ_MASKED = (1 << 17),
IRQD_IRQ_INPROGRESS = (1 << 18),
IRQD_WAKEUP_ARMED = (1 << 19),
};
#define __irqd_to_state(d) ((d)->common->state_use_accessors)
static inline bool irqd_is_setaffinity_pending(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_SETAFFINITY_PENDING;
}
static inline bool irqd_is_per_cpu(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_PER_CPU;
}
static inline bool irqd_can_balance(struct irq_data *d)
{
return !(__irqd_to_state(d) & (IRQD_PER_CPU | IRQD_NO_BALANCING));
}
static inline bool irqd_affinity_was_set(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_AFFINITY_SET;
}
static inline void irqd_mark_affinity_was_set(struct irq_data *d)
{
__irqd_to_state(d) |= IRQD_AFFINITY_SET;
}
static inline u32 irqd_get_trigger_type(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_TRIGGER_MASK;
}
/*
* Must only be called inside irq_chip.irq_set_type() functions.
*/
static inline void irqd_set_trigger_type(struct irq_data *d, u32 type)
{
__irqd_to_state(d) &= ~IRQD_TRIGGER_MASK;
__irqd_to_state(d) |= type & IRQD_TRIGGER_MASK;
}
static inline bool irqd_is_level_type(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_LEVEL;
}
static inline bool irqd_is_wakeup_set(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_WAKEUP_STATE;
}
static inline bool irqd_can_move_in_process_context(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_MOVE_PCNTXT;
}
static inline bool irqd_irq_disabled(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_IRQ_DISABLED;
}
static inline bool irqd_irq_masked(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_IRQ_MASKED;
}
static inline bool irqd_irq_inprogress(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_IRQ_INPROGRESS;
}
static inline bool irqd_is_wakeup_armed(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_WAKEUP_ARMED;
}
/*
* Functions for chained handlers which can be enabled/disabled by the
* standard disable_irq/enable_irq calls. Must be called with
* irq_desc->lock held.
*/
static inline void irqd_set_chained_irq_inprogress(struct irq_data *d)
{
__irqd_to_state(d) |= IRQD_IRQ_INPROGRESS;
}
static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d)
{
__irqd_to_state(d) &= ~IRQD_IRQ_INPROGRESS;
}
static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
{
return d->hwirq;
}
/**
* struct irq_chip - hardware interrupt chip descriptor
*
* @name: name for /proc/interrupts
* @irq_startup: start up the interrupt (defaults to ->enable if NULL)
* @irq_shutdown: shut down the interrupt (defaults to ->disable if NULL)
* @irq_enable: enable the interrupt (defaults to chip->unmask if NULL)
* @irq_disable: disable the interrupt
* @irq_ack: start of a new interrupt
* @irq_mask: mask an interrupt source
* @irq_mask_ack: ack and mask an interrupt source
* @irq_unmask: unmask an interrupt source
* @irq_eoi: end of interrupt
* @irq_set_affinity: set the CPU affinity on SMP machines
* @irq_retrigger: resend an IRQ to the CPU
* @irq_set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @irq_set_wake: enable/disable power-management wake-on of an IRQ
* @irq_bus_lock: function to lock access to slow bus (i2c) chips
* @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips
* @irq_cpu_online: configure an interrupt source for a secondary CPU
* @irq_cpu_offline: un-configure an interrupt source for a secondary CPU
* @irq_suspend: function called from core code on suspend once per chip
* @irq_resume: function called from core code on resume once per chip
* @irq_pm_shutdown: function called from core code on shutdown once per chip
* @irq_calc_mask: Optional function to set irq_data.mask for special cases
* @irq_print_chip: optional to print special chip info in show_interrupts
* @irq_request_resources: optional to request resources before calling
* any other callback related to this irq
* @irq_release_resources: optional to release resources acquired with
* irq_request_resources
* @irq_compose_msi_msg: optional to compose message content for MSI
* @irq_write_msi_msg: optional to write message content for MSI
genirq: Allow the irqchip state of an IRQ to be save/restored There is a number of cases where a kernel subsystem may want to introspect the state of an interrupt at the irqchip level: - When a peripheral is shared between virtual machines, its interrupt state becomes part of the guest's state, and must be switched accordingly. KVM on arm/arm64 requires this for its guest-visible timer - Some GPIO controllers seem to require peeking into the interrupt controller they are connected to to report their internal state This seem to be a pattern that is common enough for the core code to try and support this without too many horrible hacks. Introduce a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state) to retrieve the bits that can be of interest to another subsystem: pending, active, and masked. - irq_get_irqchip_state returns the state of the interrupt according to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE, IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL. - irq_set_irqchip_state similarly sets the state of the interrupt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Phong Vo <pvo@apm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tin Huynh <tnhuynh@apm.com> Cc: Y Vo <yvo@apm.com> Cc: Toan Le <toanle@apm.com> Cc: Bjorn Andersson <bjorn@kryo.se> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-18 18:01:22 +07:00
* @irq_get_irqchip_state: return the internal state of an interrupt
* @irq_set_irqchip_state: set the internal state of a interrupt
* @irq_set_vcpu_affinity: optional to target a vCPU in a virtual machine
* @flags: chip specific flags
*/
struct irq_chip {
const char *name;
unsigned int (*irq_startup)(struct irq_data *data);
void (*irq_shutdown)(struct irq_data *data);
void (*irq_enable)(struct irq_data *data);
void (*irq_disable)(struct irq_data *data);
void (*irq_ack)(struct irq_data *data);
void (*irq_mask)(struct irq_data *data);
void (*irq_mask_ack)(struct irq_data *data);
void (*irq_unmask)(struct irq_data *data);
void (*irq_eoi)(struct irq_data *data);
int (*irq_set_affinity)(struct irq_data *data, const struct cpumask *dest, bool force);
int (*irq_retrigger)(struct irq_data *data);
int (*irq_set_type)(struct irq_data *data, unsigned int flow_type);
int (*irq_set_wake)(struct irq_data *data, unsigned int on);
void (*irq_bus_lock)(struct irq_data *data);
void (*irq_bus_sync_unlock)(struct irq_data *data);
void (*irq_cpu_online)(struct irq_data *data);
void (*irq_cpu_offline)(struct irq_data *data);
void (*irq_suspend)(struct irq_data *data);
void (*irq_resume)(struct irq_data *data);
void (*irq_pm_shutdown)(struct irq_data *data);
void (*irq_calc_mask)(struct irq_data *data);
void (*irq_print_chip)(struct irq_data *data, struct seq_file *p);
int (*irq_request_resources)(struct irq_data *data);
void (*irq_release_resources)(struct irq_data *data);
void (*irq_compose_msi_msg)(struct irq_data *data, struct msi_msg *msg);
void (*irq_write_msi_msg)(struct irq_data *data, struct msi_msg *msg);
genirq: Allow the irqchip state of an IRQ to be save/restored There is a number of cases where a kernel subsystem may want to introspect the state of an interrupt at the irqchip level: - When a peripheral is shared between virtual machines, its interrupt state becomes part of the guest's state, and must be switched accordingly. KVM on arm/arm64 requires this for its guest-visible timer - Some GPIO controllers seem to require peeking into the interrupt controller they are connected to to report their internal state This seem to be a pattern that is common enough for the core code to try and support this without too many horrible hacks. Introduce a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state) to retrieve the bits that can be of interest to another subsystem: pending, active, and masked. - irq_get_irqchip_state returns the state of the interrupt according to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE, IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL. - irq_set_irqchip_state similarly sets the state of the interrupt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Phong Vo <pvo@apm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tin Huynh <tnhuynh@apm.com> Cc: Y Vo <yvo@apm.com> Cc: Toan Le <toanle@apm.com> Cc: Bjorn Andersson <bjorn@kryo.se> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-18 18:01:22 +07:00
int (*irq_get_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool *state);
int (*irq_set_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool state);
int (*irq_set_vcpu_affinity)(struct irq_data *data, void *vcpu_info);
unsigned long flags;
};
/*
* irq_chip specific flags
*
* IRQCHIP_SET_TYPE_MASKED: Mask before calling chip.irq_set_type()
* IRQCHIP_EOI_IF_HANDLED: Only issue irq_eoi() when irq was handled
genirq: Add chip flag to force mask on suspend On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 03:22:14 +07:00
* IRQCHIP_MASK_ON_SUSPEND: Mask non wake irqs in the suspend path
* IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks
* when irq enabled
* IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip
* IRQCHIP_ONESHOT_SAFE: One shot does not require mask/unmask
* IRQCHIP_EOI_THREADED: Chip requires eoi() on unmask in threaded mode
*/
enum {
IRQCHIP_SET_TYPE_MASKED = (1 << 0),
IRQCHIP_EOI_IF_HANDLED = (1 << 1),
genirq: Add chip flag to force mask on suspend On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 03:22:14 +07:00
IRQCHIP_MASK_ON_SUSPEND = (1 << 2),
IRQCHIP_ONOFFLINE_ENABLED = (1 << 3),
IRQCHIP_SKIP_SET_WAKE = (1 << 4),
IRQCHIP_ONESHOT_SAFE = (1 << 5),
IRQCHIP_EOI_THREADED = (1 << 6),
};
/* This include will go away once we isolated irq_desc usage to core code */
#include <linux/irqdesc.h>
/*
* Pick up the arch-dependent methods:
*/
#include <asm/hw_irq.h>
#ifndef NR_IRQS_LEGACY
# define NR_IRQS_LEGACY 0
#endif
#ifndef ARCH_IRQ_INIT_FLAGS
# define ARCH_IRQ_INIT_FLAGS 0
#endif
#define IRQ_DEFAULT_INIT_FLAGS ARCH_IRQ_INIT_FLAGS
struct irqaction;
extern int setup_irq(unsigned int irq, struct irqaction *new);
extern void remove_irq(unsigned int irq, struct irqaction *act);
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
genirq: Allow forcing cpu affinity of interrupts The current implementation of irq_set_affinity() refuses rightfully to route an interrupt to an offline cpu. But there is a special case, where this is actually desired. Some of the ARM SoCs have per cpu timers which require setting the affinity during cpu startup where the cpu is not yet in the online mask. If we can't do that, then the local timer interrupt for the about to become online cpu is routed to some random online cpu. The developers of the affected machines tried to work around that issue, but that results in a massive mess in that timer code. We have a yet unused argument in the set_affinity callbacks of the irq chips, which I added back then for a similar reason. It was never required so it got not used. But I'm happy that I never removed it. That allows us to implement a sane handling of the above scenario. So the affected SoC drivers can add the required force handling to their interrupt chip, switch the timer code to irq_force_affinity() and things just work. This does not affect any existing user of irq_set_affinity(). Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com>, Cc: Daniel Lezcano <daniel.lezcano@linaro.org>, Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-16 21:36:44 +07:00
extern int irq_set_affinity_locked(struct irq_data *data,
const struct cpumask *cpumask, bool force);
extern int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info);
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
void irq_move_irq(struct irq_data *data);
void irq_move_masked_irq(struct irq_data *data);
#else
static inline void irq_move_irq(struct irq_data *data) { }
static inline void irq_move_masked_irq(struct irq_data *data) { }
#endif
[PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity When handling writes to /proc/irq, current code is re-programming rte entries directly. This is not recommended and could potentially cause chipset's to lockup, or cause missing interrupts. CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the interrupt is pending. The same needs to be done for /proc/irq handling as well. Otherwise user space irq balancers are really not doing the right thing. - Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for lack of a generic name. - added move_irq out of IRQ_BALANCE, and added this same to X86_64 - Added new proc handler for write, so we can do deferred write at irq handling time. - Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead it now shows only active cpu masks, or exactly what was set. - Provided a common move_irq implementation, instead of duplicating when using generic irq framework. Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off. Tested UP builds as well. MSI testing: tbd: I have cards, need to look for a x-over cable, although I did test an earlier version of this patch. Will test in a couple days. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Zwane Mwaikambo <zwane@holomorphy.com> Grudgingly-acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:15 +07:00
extern int no_irq_affinity;
#ifdef CONFIG_HARDIRQS_SW_RESEND
int irq_set_parent(int irq, int parent_irq);
#else
static inline int irq_set_parent(int irq, int parent_irq)
{
return 0;
}
#endif
/*
* Built-in IRQ handlers for various IRQ types,
* callable via desc->handle_irq()
*/
extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_nested_irq(unsigned int irq);
extern int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg);
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
extern void irq_chip_ack_parent(struct irq_data *data);
extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
extern void irq_chip_mask_parent(struct irq_data *data);
extern void irq_chip_unmask_parent(struct irq_data *data);
extern void irq_chip_eoi_parent(struct irq_data *data);
extern int irq_chip_set_affinity_parent(struct irq_data *data,
const struct cpumask *dest,
bool force);
extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
extern int irq_chip_set_vcpu_affinity_parent(struct irq_data *data,
void *vcpu_info);
#endif
/* Handling of unhandled and spurious interrupts: */
extern void note_interrupt(unsigned int irq, struct irq_desc *desc,
irqreturn_t action_ret);
/* Enable/disable irq debugging output: */
extern int noirqdebug_setup(char *str);
/* Checks whether the interrupt can be requested by request_irq(): */
extern int can_request_irq(unsigned int irq, unsigned long irqflags);
/* Dummy irq-chip implementations: */
extern struct irq_chip no_irq_chip;
extern struct irq_chip dummy_irq_chip;
extern void
irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle, const char *name);
static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle)
{
irq_set_chip_and_handler_name(irq, chip, handle, NULL);
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
extern int irq_set_percpu_devid(unsigned int irq);
extern void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
static inline void
irq_set_handler(unsigned int irq, irq_flow_handler_t handle)
{
__irq_set_handler(irq, handle, 0, NULL);
}
/*
* Set a highlevel chained flow handler for a given IRQ.
* (a chained handler is automatically enabled and set to
* IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD)
*/
static inline void
irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle)
{
__irq_set_handler(irq, handle, 1, NULL);
}
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set);
static inline void irq_set_status_flags(unsigned int irq, unsigned long set)
{
irq_modify_status(irq, 0, set);
}
static inline void irq_clear_status_flags(unsigned int irq, unsigned long clr)
{
irq_modify_status(irq, clr, 0);
}
static inline void irq_set_noprobe(unsigned int irq)
{
irq_modify_status(irq, 0, IRQ_NOPROBE);
}
static inline void irq_set_probe(unsigned int irq)
{
irq_modify_status(irq, IRQ_NOPROBE, 0);
}
static inline void irq_set_nothread(unsigned int irq)
{
irq_modify_status(irq, 0, IRQ_NOTHREAD);
}
static inline void irq_set_thread(unsigned int irq)
{
irq_modify_status(irq, IRQ_NOTHREAD, 0);
}
static inline void irq_set_nested_thread(unsigned int irq, bool nest)
{
if (nest)
irq_set_status_flags(irq, IRQ_NESTED_THREAD);
else
irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 23:03:06 +07:00
static inline void irq_set_percpu_devid_flags(unsigned int irq)
{
irq_set_status_flags(irq,
IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
}
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 16:16:37 +07:00
/* Set/get chip/data for an IRQ: */
extern int irq_set_chip(unsigned int irq, struct irq_chip *chip);
extern int irq_set_handler_data(unsigned int irq, void *data);
extern int irq_set_chip_data(unsigned int irq, void *data);
extern int irq_set_irq_type(unsigned int irq, unsigned int type);
extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
extern int irq_set_msi_desc_off(unsigned int irq_base, unsigned int irq_offset,
struct msi_desc *entry);
extern struct irq_data *irq_get_irq_data(unsigned int irq);
static inline struct irq_chip *irq_get_chip(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? d->chip : NULL;
}
static inline struct irq_chip *irq_data_get_irq_chip(struct irq_data *d)
{
return d->chip;
}
static inline void *irq_get_chip_data(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? d->chip_data : NULL;
}
static inline void *irq_data_get_irq_chip_data(struct irq_data *d)
{
return d->chip_data;
}
static inline void *irq_get_handler_data(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? d->handler_data : NULL;
}
static inline void *irq_data_get_irq_handler_data(struct irq_data *d)
{
return d->handler_data;
}
static inline struct msi_desc *irq_get_msi_desc(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? d->msi_desc : NULL;
}
static inline struct msi_desc *irq_data_get_msi(struct irq_data *d)
{
return d->msi_desc;
}
static inline u32 irq_get_trigger_type(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? irqd_get_trigger_type(d) : 0;
}
static inline int irq_data_get_node(struct irq_data *d)
{
return d->node;
}
static inline struct cpumask *irq_get_affinity_mask(int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
return d ? d->affinity : NULL;
}
static inline struct cpumask *irq_data_get_affinity_mask(struct irq_data *d)
{
return d->affinity;
}
genirq: x86: Ensure that dynamic irq allocation does not conflict On x86 the allocation of irq descriptors may allocate interrupts which are in the range of the GSI interrupts. That's wrong as those interrupts are hardwired and we don't have the irq domain translation like PPC. So one of these interrupts can be hooked up later to one of the devices which are hard wired to it and the io_apic init code for that particular interrupt line happily reuses that descriptor with a completely different configuration so hell breaks lose. Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs, except for a few usage sites which have not yet blown up in our face for whatever reason. But for drivers which need an irq range, like the GPIO drivers, we have no limit in place and we don't want to expose such a detail to a driver. To cure this introduce a function which an architecture can implement to impose a lower bound on the dynamic interrupt allocations. Implement it for x86 and set the lower bound to nr_gsi_irqs, which is the end of the hardwired interrupt space, so all dynamic allocations happen above. That not only allows the GPIO driver to work sanely, it also protects the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and htirq code. They need to be cleaned up as well, but that's a separate issue. Reported-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Krogerus Heikki <heikki.krogerus@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-24 14:50:53 +07:00
unsigned int arch_dynirq_lower_bound(unsigned int from);
int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
struct module *owner);
/* use macros to avoid needing export.h for THIS_MODULE */
#define irq_alloc_descs(irq, from, cnt, node) \
__irq_alloc_descs(irq, from, cnt, node, THIS_MODULE)
#define irq_alloc_desc(node) \
irq_alloc_descs(-1, 0, 1, node)
genirq: Implement a sane sparse_irq allocator The current sparse_irq allocator has several short comings due to failures in the design or the lack of it: - Requires iteration over the number of active irqs to find a free slot (Some architectures have grown their own workarounds for this) - Removal of entries is not possible - Racy between create_irq_nr and destroy_irq (plugged by horrible callbacks) - Migration of active irq descriptors is not possible - No bulk allocation of irq ranges - Sprinkeled irq_desc references all over the place outside of kernel/irq/ (The previous chip functions series is addressing this issue) Implement a sane allocator which fixes the above short comings (though migration of active descriptors needs a full tree wide cleanup of the direct and mostly unlocked access to irq_desc). The new allocator still uses a radix_tree, but uses a bitmap for keeping track of allocated irq numbers. That allows: - Fast lookup of a free slot - Allows the removal of descriptors - Prevents the create/destroy race - Bulk allocation of consecutive irq ranges - Basic design is ready for migration of life descriptors after further cleanups The bitmap is also used in the SPARSE_IRQ=n case for lookup and raceless (de)allocation of irq numbers. So it removes the requirement for looping through the descriptor array to find slots. Right now it uses sparse_irq_lock to protect the bitmap and the radix tree, but after cleaning up all users we should be able convert that to a mutex and to switch the radix_tree and decriptor allocations to GFP_KERNEL. [ Folded in a bugfix from Yinghai Lu ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 22:48:26 +07:00
#define irq_alloc_desc_at(at, node) \
irq_alloc_descs(at, at, 1, node)
genirq: Implement a sane sparse_irq allocator The current sparse_irq allocator has several short comings due to failures in the design or the lack of it: - Requires iteration over the number of active irqs to find a free slot (Some architectures have grown their own workarounds for this) - Removal of entries is not possible - Racy between create_irq_nr and destroy_irq (plugged by horrible callbacks) - Migration of active irq descriptors is not possible - No bulk allocation of irq ranges - Sprinkeled irq_desc references all over the place outside of kernel/irq/ (The previous chip functions series is addressing this issue) Implement a sane allocator which fixes the above short comings (though migration of active descriptors needs a full tree wide cleanup of the direct and mostly unlocked access to irq_desc). The new allocator still uses a radix_tree, but uses a bitmap for keeping track of allocated irq numbers. That allows: - Fast lookup of a free slot - Allows the removal of descriptors - Prevents the create/destroy race - Bulk allocation of consecutive irq ranges - Basic design is ready for migration of life descriptors after further cleanups The bitmap is also used in the SPARSE_IRQ=n case for lookup and raceless (de)allocation of irq numbers. So it removes the requirement for looping through the descriptor array to find slots. Right now it uses sparse_irq_lock to protect the bitmap and the radix tree, but after cleaning up all users we should be able convert that to a mutex and to switch the radix_tree and decriptor allocations to GFP_KERNEL. [ Folded in a bugfix from Yinghai Lu ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 22:48:26 +07:00
#define irq_alloc_desc_from(from, node) \
irq_alloc_descs(-1, from, 1, node)
genirq: Implement a sane sparse_irq allocator The current sparse_irq allocator has several short comings due to failures in the design or the lack of it: - Requires iteration over the number of active irqs to find a free slot (Some architectures have grown their own workarounds for this) - Removal of entries is not possible - Racy between create_irq_nr and destroy_irq (plugged by horrible callbacks) - Migration of active irq descriptors is not possible - No bulk allocation of irq ranges - Sprinkeled irq_desc references all over the place outside of kernel/irq/ (The previous chip functions series is addressing this issue) Implement a sane allocator which fixes the above short comings (though migration of active descriptors needs a full tree wide cleanup of the direct and mostly unlocked access to irq_desc). The new allocator still uses a radix_tree, but uses a bitmap for keeping track of allocated irq numbers. That allows: - Fast lookup of a free slot - Allows the removal of descriptors - Prevents the create/destroy race - Bulk allocation of consecutive irq ranges - Basic design is ready for migration of life descriptors after further cleanups The bitmap is also used in the SPARSE_IRQ=n case for lookup and raceless (de)allocation of irq numbers. So it removes the requirement for looping through the descriptor array to find slots. Right now it uses sparse_irq_lock to protect the bitmap and the radix tree, but after cleaning up all users we should be able convert that to a mutex and to switch the radix_tree and decriptor allocations to GFP_KERNEL. [ Folded in a bugfix from Yinghai Lu ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 22:48:26 +07:00
#define irq_alloc_descs_from(from, cnt, node) \
irq_alloc_descs(-1, from, cnt, node)
void irq_free_descs(unsigned int irq, unsigned int cnt);
genirq: Implement a sane sparse_irq allocator The current sparse_irq allocator has several short comings due to failures in the design or the lack of it: - Requires iteration over the number of active irqs to find a free slot (Some architectures have grown their own workarounds for this) - Removal of entries is not possible - Racy between create_irq_nr and destroy_irq (plugged by horrible callbacks) - Migration of active irq descriptors is not possible - No bulk allocation of irq ranges - Sprinkeled irq_desc references all over the place outside of kernel/irq/ (The previous chip functions series is addressing this issue) Implement a sane allocator which fixes the above short comings (though migration of active descriptors needs a full tree wide cleanup of the direct and mostly unlocked access to irq_desc). The new allocator still uses a radix_tree, but uses a bitmap for keeping track of allocated irq numbers. That allows: - Fast lookup of a free slot - Allows the removal of descriptors - Prevents the create/destroy race - Bulk allocation of consecutive irq ranges - Basic design is ready for migration of life descriptors after further cleanups The bitmap is also used in the SPARSE_IRQ=n case for lookup and raceless (de)allocation of irq numbers. So it removes the requirement for looping through the descriptor array to find slots. Right now it uses sparse_irq_lock to protect the bitmap and the radix tree, but after cleaning up all users we should be able convert that to a mutex and to switch the radix_tree and decriptor allocations to GFP_KERNEL. [ Folded in a bugfix from Yinghai Lu ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 22:48:26 +07:00
static inline void irq_free_desc(unsigned int irq)
{
irq_free_descs(irq, 1);
}
genirq: Provide generic hwirq allocation facility Not really the solution to the problem, but at least it confines the mess in the core code and allows to get rid of the create/destroy_irq variants from hell, i.e. 3 implementations with different semantics plus the x86 specific variants __create_irqs and create_irq_nr which have been invented in another circle of hell. x86 : x86 should be converted to irq domains and I'm deliberately making it impossible to do the multi-vector MSI support by adding more crap to the current mess. It's not that hard to do and I'm really tired of the trainwrecks which have been invented by baindaid engineering so far. Any attempt to do multi-vector MSI or ioapic hotplug without converting to irq domains is NAKed hereby. tile: Might use irq domains as well, but it has a very limited interrupt space, so handling it via this functionality might be the right thing to do even in the long run. ia64: That's an hopeless case, as I doubt that anyone has the stomach to rewrite the homebrewn dynamic allocation facilities. I stared at it for a couple of hours and gave up. The create/destroy_irq mess could be made private to itanic right away if there wouldn't be the iommu/dmar driver being shared with x86. So to do that I'm going to add a separate ia64 specific implementation later in order not to deep-six itanic right away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154334.208629358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-07 22:44:05 +07:00
#ifdef CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
unsigned int irq_alloc_hwirqs(int cnt, int node);
static inline unsigned int irq_alloc_hwirq(int node)
{
return irq_alloc_hwirqs(1, node);
}
void irq_free_hwirqs(unsigned int from, int cnt);
static inline void irq_free_hwirq(unsigned int irq)
{
return irq_free_hwirqs(irq, 1);
}
int arch_setup_hwirq(unsigned int irq, int node);
void arch_teardown_hwirq(unsigned int irq);
#endif
#ifdef CONFIG_GENERIC_IRQ_LEGACY
void irq_init_desc(unsigned int irq);
#endif
/**
* struct irq_chip_regs - register offsets for struct irq_gci
* @enable: Enable register offset to reg_base
* @disable: Disable register offset to reg_base
* @mask: Mask register offset to reg_base
* @ack: Ack register offset to reg_base
* @eoi: Eoi register offset to reg_base
* @type: Type configuration register offset to reg_base
* @polarity: Polarity configuration register offset to reg_base
*/
struct irq_chip_regs {
unsigned long enable;
unsigned long disable;
unsigned long mask;
unsigned long ack;
unsigned long eoi;
unsigned long type;
unsigned long polarity;
};
/**
* struct irq_chip_type - Generic interrupt chip instance for a flow type
* @chip: The real interrupt chip which provides the callbacks
* @regs: Register offsets for this chip
* @handler: Flow handler associated with this chip
* @type: Chip can handle these flow types
genirq: Generic chip: Add support for per chip type mask cache Today the same interrupt mask cache (stored within struct irq_chip_generic) is shared between all the irq_chip_type instances. As there are instances where each irq_chip_type uses a distinct mask register (as it is the case for Orion SoCs), sharing a single mask cache may be incorrect. So add a distinct pointer for each irq_chip_type, which for now points to the original mask register within irq_chip_generic. So no functional changes here. [ tglx: Minor cosmetic tweaks ] Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Holger Brunck <Holger.Brunck@keymile.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Simon Guinot <simon@sequanux.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Rob Landley <rob@landley.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/20130506142539.082226607@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 21:30:19 +07:00
* @mask_cache_priv: Cached mask register private to the chip type
* @mask_cache: Pointer to cached mask register
*
* A irq_generic_chip can have several instances of irq_chip_type when
* it requires different functions and register offsets for different
* flow types.
*/
struct irq_chip_type {
struct irq_chip chip;
struct irq_chip_regs regs;
irq_flow_handler_t handler;
u32 type;
genirq: Generic chip: Add support for per chip type mask cache Today the same interrupt mask cache (stored within struct irq_chip_generic) is shared between all the irq_chip_type instances. As there are instances where each irq_chip_type uses a distinct mask register (as it is the case for Orion SoCs), sharing a single mask cache may be incorrect. So add a distinct pointer for each irq_chip_type, which for now points to the original mask register within irq_chip_generic. So no functional changes here. [ tglx: Minor cosmetic tweaks ] Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Holger Brunck <Holger.Brunck@keymile.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Simon Guinot <simon@sequanux.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Rob Landley <rob@landley.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/20130506142539.082226607@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 21:30:19 +07:00
u32 mask_cache_priv;
u32 *mask_cache;
};
/**
* struct irq_chip_generic - Generic irq chip data structure
* @lock: Lock to protect register and cache data access
* @reg_base: Register base address (virtual)
* @reg_readl: Alternate I/O accessor (defaults to readl if NULL)
* @reg_writel: Alternate I/O accessor (defaults to writel if NULL)
* @irq_base: Interrupt base nr for this chip
* @irq_cnt: Number of interrupts handled by this chip
genirq: Generic chip: Add support for per chip type mask cache Today the same interrupt mask cache (stored within struct irq_chip_generic) is shared between all the irq_chip_type instances. As there are instances where each irq_chip_type uses a distinct mask register (as it is the case for Orion SoCs), sharing a single mask cache may be incorrect. So add a distinct pointer for each irq_chip_type, which for now points to the original mask register within irq_chip_generic. So no functional changes here. [ tglx: Minor cosmetic tweaks ] Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Holger Brunck <Holger.Brunck@keymile.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Simon Guinot <simon@sequanux.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Rob Landley <rob@landley.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/20130506142539.082226607@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 21:30:19 +07:00
* @mask_cache: Cached mask register shared between all chip types
* @type_cache: Cached type register
* @polarity_cache: Cached polarity register
* @wake_enabled: Interrupt can wakeup from suspend
* @wake_active: Interrupt is marked as an wakeup from suspend source
* @num_ct: Number of available irq_chip_type instances (usually 1)
* @private: Private data for non generic chip callbacks
2013-05-06 21:30:27 +07:00
* @installed: bitfield to denote installed interrupts
* @unused: bitfield to denote unused interrupts
2013-05-06 21:30:27 +07:00
* @domain: irq domain pointer
* @list: List head for keeping track of instances
* @chip_types: Array of interrupt irq_chip_types
*
* Note, that irq_chip_generic can have multiple irq_chip_type
* implementations which can be associated to a particular irq line of
* an irq_chip_generic instance. That allows to share and protect
* state in an irq_chip_generic instance when we need to implement
* different flow mechanisms (level/edge) for it.
*/
struct irq_chip_generic {
raw_spinlock_t lock;
void __iomem *reg_base;
u32 (*reg_readl)(void __iomem *addr);
void (*reg_writel)(u32 val, void __iomem *addr);
unsigned int irq_base;
unsigned int irq_cnt;
u32 mask_cache;
u32 type_cache;
u32 polarity_cache;
u32 wake_enabled;
u32 wake_active;
unsigned int num_ct;
void *private;
2013-05-06 21:30:27 +07:00
unsigned long installed;
unsigned long unused;
2013-05-06 21:30:27 +07:00
struct irq_domain *domain;
struct list_head list;
struct irq_chip_type chip_types[0];
};
/**
* enum irq_gc_flags - Initialization flags for generic irq chips
* @IRQ_GC_INIT_MASK_CACHE: Initialize the mask_cache by reading mask reg
* @IRQ_GC_INIT_NESTED_LOCK: Set the lock class of the irqs to nested for
* irq chips which need to call irq_set_wake() on
* the parent irq. Usually GPIO implementations
genirq: Generic chip: Handle separate mask registers There are cases where all irq_chip_type instances have separate mask registers, making a shared mask register cache unsuitable for the purpose. Introduce a new flag IRQ_GC_MASK_CACHE_PER_TYPE. If set, point the per chip mask pointer to the per chip private mask cache instead. [ tglx: Simplified code, renamed flag and massaged changelog ] Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Joey Oravec <joravec@drewtech.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Holger Brunck <Holger.Brunck@keymile.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Simon Guinot <simon@sequanux.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Rob Landley <rob@landley.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/20130506142539.152569748@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 21:30:21 +07:00
* @IRQ_GC_MASK_CACHE_PER_TYPE: Mask cache is chip type private
* @IRQ_GC_NO_MASK: Do not calculate irq_data->mask
* @IRQ_GC_BE_IO: Use big-endian register accesses (default: LE)
*/
enum irq_gc_flags {
IRQ_GC_INIT_MASK_CACHE = 1 << 0,
IRQ_GC_INIT_NESTED_LOCK = 1 << 1,
genirq: Generic chip: Handle separate mask registers There are cases where all irq_chip_type instances have separate mask registers, making a shared mask register cache unsuitable for the purpose. Introduce a new flag IRQ_GC_MASK_CACHE_PER_TYPE. If set, point the per chip mask pointer to the per chip private mask cache instead. [ tglx: Simplified code, renamed flag and massaged changelog ] Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Joey Oravec <joravec@drewtech.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Holger Brunck <Holger.Brunck@keymile.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Simon Guinot <simon@sequanux.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Rob Landley <rob@landley.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/20130506142539.152569748@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 21:30:21 +07:00
IRQ_GC_MASK_CACHE_PER_TYPE = 1 << 2,
IRQ_GC_NO_MASK = 1 << 3,
IRQ_GC_BE_IO = 1 << 4,
};
2013-05-06 21:30:27 +07:00
/*
* struct irq_domain_chip_generic - Generic irq chip data structure for irq domains
* @irqs_per_chip: Number of interrupts per chip
* @num_chips: Number of chips
* @irq_flags_to_set: IRQ* flags to set on irq setup
* @irq_flags_to_clear: IRQ* flags to clear on irq setup
* @gc_flags: Generic chip specific setup flags
* @gc: Array of pointers to generic interrupt chips
*/
struct irq_domain_chip_generic {
unsigned int irqs_per_chip;
unsigned int num_chips;
unsigned int irq_flags_to_clear;
unsigned int irq_flags_to_set;
enum irq_gc_flags gc_flags;
struct irq_chip_generic *gc[0];
};
/* Generic chip callback functions */
void irq_gc_noop(struct irq_data *d);
void irq_gc_mask_disable_reg(struct irq_data *d);
void irq_gc_mask_set_bit(struct irq_data *d);
void irq_gc_mask_clr_bit(struct irq_data *d);
void irq_gc_unmask_enable_reg(struct irq_data *d);
void irq_gc_ack_set_bit(struct irq_data *d);
void irq_gc_ack_clr_bit(struct irq_data *d);
void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
void irq_gc_eoi(struct irq_data *d);
int irq_gc_set_wake(struct irq_data *d, unsigned int on);
/* Setup functions for irq_chip_generic */
int irq_map_generic_chip(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw_irq);
struct irq_chip_generic *
irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
void __iomem *reg_base, irq_flow_handler_t handler);
void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
enum irq_gc_flags flags, unsigned int clr,
unsigned int set);
int irq_setup_alt_chip(struct irq_data *d, unsigned int type);
void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
unsigned int clr, unsigned int set);
2013-05-06 21:30:27 +07:00
struct irq_chip_generic *irq_get_domain_generic_chip(struct irq_domain *d, unsigned int hw_irq);
int irq_alloc_domain_generic_chips(struct irq_domain *d, int irqs_per_chip,
int num_ct, const char *name,
irq_flow_handler_t handler,
unsigned int clr, unsigned int set,
enum irq_gc_flags flags);
static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d)
{
return container_of(d->chip, struct irq_chip_type, chip);
}
#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX)
#ifdef CONFIG_SMP
static inline void irq_gc_lock(struct irq_chip_generic *gc)
{
raw_spin_lock(&gc->lock);
}
static inline void irq_gc_unlock(struct irq_chip_generic *gc)
{
raw_spin_unlock(&gc->lock);
}
#else
static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
#endif
static inline void irq_reg_writel(struct irq_chip_generic *gc,
u32 val, int reg_offset)
{
if (gc->reg_writel)
gc->reg_writel(val, gc->reg_base + reg_offset);
else
writel(val, gc->reg_base + reg_offset);
}
static inline u32 irq_reg_readl(struct irq_chip_generic *gc,
int reg_offset)
{
if (gc->reg_readl)
return gc->reg_readl(gc->reg_base + reg_offset);
else
return readl(gc->reg_base + reg_offset);
}
#endif /* _LINUX_IRQ_H */