AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 11:36:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
bf4e70e54c
linux_dsm_epyc7002/arch/sparc64/kernel/entry.S

1782 lines
45 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* $Id: entry.S,v 1.144 2002/02/09 19:49:30 davem Exp $
* arch/sparc64/kernel/entry.S: Sparc64 trap low-level entry points.
*
* Copyright (C) 1995,1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1996,98,99 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <asm/head.h>
#include <asm/asi.h>
#include <asm/smp.h>
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/visasm.h>
#include <asm/estate.h>
#include <asm/auxio.h>
#define curptr g6
#define NR_SYSCALLS 284 /* Each OS is different... */
.text
.align 32
.globl sparc64_vpte_patchme1
.globl sparc64_vpte_patchme2
/*
* On a second level vpte miss, check whether the original fault is to the OBP
* range (note that this is only possible for instruction miss, data misses to
* obp range do not use vpte). If so, go back directly to the faulting address.
* This is because we want to read the tpc, otherwise we have no way of knowing
* the 8k aligned faulting address if we are using >8k kernel pagesize. This
* also ensures no vpte range addresses are dropped into tlb while obp is
* executing (see inherit_locked_prom_mappings() rant).
*/
sparc64_vpte_nucleus:
/* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
mov 0xf, %g5
sllx %g5, 28, %g5
/* Is addr >= LOW_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, sparc64_vpte_patchme1
mov 0x1, %g5
/* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
/* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_iaddr_patch
nop
/* These two instructions are patched by paginig_init(). */
sparc64_vpte_patchme1:
sethi %hi(0), %g5
sparc64_vpte_patchme2:
or %g5, %lo(0), %g5
/* With kernel PGD in %g5, branch back into dtlb_backend. */
ba,pt %xcc, sparc64_kpte_continue
andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
vpte_noent:
/* Restore previous TAG_ACCESS, %g5 is zero, and we will
* skip over the trap instruction so that the top level
* TLB miss handler will thing this %g5 value is just an
* invalid PTE, thus branching to full fault processing.
*/
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_DMMU
done
.globl obp_iaddr_patch
obp_iaddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Behave as if we are at TL0. */
wrpr %g0, 1, %tl
rdpr %tpc, %g4 /* Find original faulting iaddr */
srlx %g4, 13, %g4 /* Throw out context bits */
sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
/* Restore previous TAG_ACCESS. */
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_IMMU
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
.globl obp_daddr_patch
obp_daddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
/*
* On a first level data miss, check whether this is to the OBP range (note
* that such accesses can be made by prom, as well as by kernel using
* prom_getproperty on "address"), and if so, do not use vpte access ...
* rather, use information saved during inherit_prom_mappings() using 8k
* pagesize.
*/
kvmap:
/* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
mov 0xf, %g5
sllx %g5, 28, %g5
/* Is addr >= LOW_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, vmalloc_addr
mov 0x1, %g5
/* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
/* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_daddr_patch
nop
vmalloc_addr:
/* If we get here, a vmalloc addr accessed, load kernel VPTE. */
ldxa [%g3 + %g6] ASI_N, %g5
brgez,pn %g5, longpath
nop
/* PTE is valid, load into TLB and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry
/* This is trivial with the new code... */
.globl do_fpdis
do_fpdis:
sethi %hi(TSTATE_PEF), %g4 ! IEU0
rdpr %tstate, %g5
andcc %g5, %g4, %g0
be,pt %xcc, 1f
nop
rd %fprs, %g5
andcc %g5, FPRS_FEF, %g0
be,pt %xcc, 1f
nop
/* Legal state when DCR_IFPOE is set in Cheetah %dcr. */
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
add %g0, %g0, %g0
ba,a,pt %xcc, rtrap_clr_l6
1: ldub [%g6 + TI_FPSAVED], %g5 ! Load Group
wr %g0, FPRS_FEF, %fprs ! LSU Group+4bubbles
andcc %g5, FPRS_FEF, %g0 ! IEU1 Group
be,a,pt %icc, 1f ! CTI
clr %g7 ! IEU0
ldx [%g6 + TI_GSR], %g7 ! Load Group
1: andcc %g5, FPRS_DL, %g0 ! IEU1
bne,pn %icc, 2f ! CTI
fzero %f0 ! FPA
andcc %g5, FPRS_DU, %g0 ! IEU1 Group
bne,pn %icc, 1f ! CTI
fzero %f2 ! FPA
faddd %f0, %f2, %f4
fmuld %f0, %f2, %f6
faddd %f0, %f2, %f8
fmuld %f0, %f2, %f10
faddd %f0, %f2, %f12
fmuld %f0, %f2, %f14
faddd %f0, %f2, %f16
fmuld %f0, %f2, %f18
faddd %f0, %f2, %f20
fmuld %f0, %f2, %f22
faddd %f0, %f2, %f24
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
faddd %f0, %f2, %f32
fmuld %f0, %f2, %f34
faddd %f0, %f2, %f36
fmuld %f0, %f2, %f38
faddd %f0, %f2, %f40
fmuld %f0, %f2, %f42
faddd %f0, %f2, %f44
fmuld %f0, %f2, %f46
faddd %f0, %f2, %f48
fmuld %f0, %f2, %f50
faddd %f0, %f2, %f52
fmuld %f0, %f2, %f54
faddd %f0, %f2, %f56
fmuld %f0, %f2, %f58
b,pt %xcc, fpdis_exit2
faddd %f0, %f2, %f60
1: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS + 0x80, %g1
faddd %f0, %f2, %f4
fmuld %f0, %f2, %f6
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_1:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0xc0, %g2
faddd %f0, %f2, %f8
fmuld %f0, %f2, %f10
ldda [%g1] ASI_BLK_S, %f32 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g2] ASI_BLK_S, %f48
faddd %f0, %f2, %f12
fmuld %f0, %f2, %f14
faddd %f0, %f2, %f16
fmuld %f0, %f2, %f18
faddd %f0, %f2, %f20
fmuld %f0, %f2, %f22
faddd %f0, %f2, %f24
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 05:42:04 +07:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
b,pt %xcc, fpdis_exit
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 05:42:04 +07:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
2: andcc %g5, FPRS_DU, %g0
bne,pt %icc, 3f
fzero %f32
mov SECONDARY_CONTEXT, %g3
fzero %f34
ldxa [%g3] ASI_DMMU, %g5
add %g6, TI_FPREGS, %g1
cplus_fptrap_insn_2:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0x40, %g2
faddd %f32, %f34, %f36
fmuld %f32, %f34, %f38
ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g2] ASI_BLK_S, %f16
faddd %f32, %f34, %f40
fmuld %f32, %f34, %f42
faddd %f32, %f34, %f44
fmuld %f32, %f34, %f46
faddd %f32, %f34, %f48
fmuld %f32, %f34, %f50
faddd %f32, %f34, %f52
fmuld %f32, %f34, %f54
faddd %f32, %f34, %f56
fmuld %f32, %f34, %f58
faddd %f32, %f34, %f60
fmuld %f32, %f34, %f62
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 05:42:04 +07:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
ba,pt %xcc, fpdis_exit
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 05:42:04 +07:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
3: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS, %g1
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_3:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
mov 0x40, %g2
ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g1 + %g2] ASI_BLK_S, %f16
add %g1, 0x80, %g1
ldda [%g1] ASI_BLK_S, %f32
ldda [%g1 + %g2] ASI_BLK_S, %f48
membar #Sync
fpdis_exit:
stxa %g5, [%g3] ASI_DMMU
membar #Sync
fpdis_exit2:
wr %g7, 0, %gsr
ldx [%g6 + TI_XFSR], %fsr
rdpr %tstate, %g3
or %g3, %g4, %g3 ! anal...
wrpr %g3, %tstate
wr %g0, FPRS_FEF, %fprs ! clean DU/DL bits
retry
.align 32
fp_other_bounce:
call do_fpother
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_fpother_check_fitos
.align 32
do_fpother_check_fitos:
sethi %hi(fp_other_bounce - 4), %g7
or %g7, %lo(fp_other_bounce - 4), %g7
/* NOTE: Need to preserve %g7 until we fully commit
* to the fitos fixup.
*/
stx %fsr, [%g6 + TI_XFSR]
rdpr %tstate, %g3
andcc %g3, TSTATE_PRIV, %g0
bne,pn %xcc, do_fptrap_after_fsr
nop
ldx [%g6 + TI_XFSR], %g3
srlx %g3, 14, %g1
and %g1, 7, %g1
cmp %g1, 2 ! Unfinished FP-OP
bne,pn %xcc, do_fptrap_after_fsr
sethi %hi(1 << 23), %g1 ! Inexact
andcc %g3, %g1, %g0
bne,pn %xcc, do_fptrap_after_fsr
rdpr %tpc, %g1
lduwa [%g1] ASI_AIUP, %g3 ! This cannot ever fail
#define FITOS_MASK 0xc1f83fe0
#define FITOS_COMPARE 0x81a01880
sethi %hi(FITOS_MASK), %g1
or %g1, %lo(FITOS_MASK), %g1
and %g3, %g1, %g1
sethi %hi(FITOS_COMPARE), %g2
or %g2, %lo(FITOS_COMPARE), %g2
cmp %g1, %g2
bne,pn %xcc, do_fptrap_after_fsr
nop
std %f62, [%g6 + TI_FPREGS + (62 * 4)]
sethi %hi(fitos_table_1), %g1
and %g3, 0x1f, %g2
or %g1, %lo(fitos_table_1), %g1
sllx %g2, 2, %g2
jmpl %g1 + %g2, %g0
ba,pt %xcc, fitos_emul_continue
fitos_table_1:
fitod %f0, %f62
fitod %f1, %f62
fitod %f2, %f62
fitod %f3, %f62
fitod %f4, %f62
fitod %f5, %f62
fitod %f6, %f62
fitod %f7, %f62
fitod %f8, %f62
fitod %f9, %f62
fitod %f10, %f62
fitod %f11, %f62
fitod %f12, %f62
fitod %f13, %f62
fitod %f14, %f62
fitod %f15, %f62
fitod %f16, %f62
fitod %f17, %f62
fitod %f18, %f62
fitod %f19, %f62
fitod %f20, %f62
fitod %f21, %f62
fitod %f22, %f62
fitod %f23, %f62
fitod %f24, %f62
fitod %f25, %f62
fitod %f26, %f62
fitod %f27, %f62
fitod %f28, %f62
fitod %f29, %f62
fitod %f30, %f62
fitod %f31, %f62
fitos_emul_continue:
sethi %hi(fitos_table_2), %g1
srl %g3, 25, %g2
or %g1, %lo(fitos_table_2), %g1
and %g2, 0x1f, %g2
sllx %g2, 2, %g2
jmpl %g1 + %g2, %g0
ba,pt %xcc, fitos_emul_fini
fitos_table_2:
fdtos %f62, %f0
fdtos %f62, %f1
fdtos %f62, %f2
fdtos %f62, %f3
fdtos %f62, %f4
fdtos %f62, %f5
fdtos %f62, %f6
fdtos %f62, %f7
fdtos %f62, %f8
fdtos %f62, %f9
fdtos %f62, %f10
fdtos %f62, %f11
fdtos %f62, %f12
fdtos %f62, %f13
fdtos %f62, %f14
fdtos %f62, %f15
fdtos %f62, %f16
fdtos %f62, %f17
fdtos %f62, %f18
fdtos %f62, %f19
fdtos %f62, %f20
fdtos %f62, %f21
fdtos %f62, %f22
fdtos %f62, %f23
fdtos %f62, %f24
fdtos %f62, %f25
fdtos %f62, %f26
fdtos %f62, %f27
fdtos %f62, %f28
fdtos %f62, %f29
fdtos %f62, %f30
fdtos %f62, %f31
fitos_emul_fini:
ldd [%g6 + TI_FPREGS + (62 * 4)], %f62
done
.globl do_fptrap
.align 32
do_fptrap:
stx %fsr, [%g6 + TI_XFSR]
do_fptrap_after_fsr:
ldub [%g6 + TI_FPSAVED], %g3
rd %fprs, %g1
or %g3, %g1, %g3
stb %g3, [%g6 + TI_FPSAVED]
rd %gsr, %g3
stx %g3, [%g6 + TI_GSR]
mov SECONDARY_CONTEXT, %g3
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_4:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS, %g2
andcc %g1, FPRS_DL, %g0
be,pn %icc, 4f
mov 0x40, %g3
stda %f0, [%g2] ASI_BLK_S
stda %f16, [%g2 + %g3] ASI_BLK_S
andcc %g1, FPRS_DU, %g0
be,pn %icc, 5f
4: add %g2, 128, %g2
stda %f32, [%g2] ASI_BLK_S
stda %f48, [%g2 + %g3] ASI_BLK_S
5: mov SECONDARY_CONTEXT, %g1
membar #Sync
stxa %g5, [%g1] ASI_DMMU
membar #Sync
ba,pt %xcc, etrap
wr %g0, 0, %fprs
cplus_fptrap_1:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.globl cheetah_plus_patch_fpdis
cheetah_plus_patch_fpdis:
/* We configure the dTLB512_0 for 4MB pages and the
* dTLB512_1 for 8K pages when in context zero.
*/
sethi %hi(cplus_fptrap_1), %o0
lduw [%o0 + %lo(cplus_fptrap_1)], %o1
set cplus_fptrap_insn_1, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_2, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_3, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_4, %o2
stw %o1, [%o2]
flush %o2
retl
nop
/* The registers for cross calls will be:
*
* DATA 0: [low 32-bits] Address of function to call, jmp to this
* [high 32-bits] MMU Context Argument 0, place in %g5
* DATA 1: Address Argument 1, place in %g6
* DATA 2: Address Argument 2, place in %g7
*
* With this method we can do most of the cross-call tlb/cache
* flushing very quickly.
*
* Current CPU's IRQ worklist table is locked into %g1,
* don't touch.
*/
.text
.align 32
.globl do_ivec
do_ivec:
mov 0x40, %g3
ldxa [%g3 + %g0] ASI_INTR_R, %g3
sethi %hi(KERNBASE), %g4
cmp %g3, %g4
bgeu,pn %xcc, do_ivec_xcall
srlx %g3, 32, %g5
stxa %g0, [%g0] ASI_INTR_RECEIVE
membar #Sync
sethi %hi(ivector_table), %g2
sllx %g3, 5, %g3
or %g2, %lo(ivector_table), %g2
add %g2, %g3, %g3
ldub [%g3 + 0x04], %g4 /* pil */
[SPARC64]: Add support for IRQ pre-handlers. This allows a PCI controller to shim into IRQ delivery so that DMA queues can be drained, if necessary. If some bus specific code needs to run before an IRQ handler is invoked, the bus driver simply needs to setup the function pointer in bucket->irq_info->pre_handler and the two args bucket->irq_info->pre_handler_arg[12]. The Schizo PCI driver is converted over to use a pre-handler for the DMA write-sync processing it needs when a device is behind a PCI->PCI bus deeper than the top-level APB bridges. While we're here, clean up all of the action allocation and handling. Now, we allocate the irqaction as part of the bucket->irq_info area. There is an array of 4 irqaction (for PCI irq sharing) and a bitmask saying which entries are active. The bucket->irq_info is allocated at build_irq() time, not at request_irq() time. This simplifies request_irq() and free_irq() tremendously. The SMP dynamic IRQ retargetting code got removed in this change too. It was disabled for a few months now, and we can resurrect it in the future if we want. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05 03:24:38 +07:00
mov 1, %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sllx %g2, %g4, %g2
sllx %g4, 2, %g4
[SPARC64]: Add support for IRQ pre-handlers. This allows a PCI controller to shim into IRQ delivery so that DMA queues can be drained, if necessary. If some bus specific code needs to run before an IRQ handler is invoked, the bus driver simply needs to setup the function pointer in bucket->irq_info->pre_handler and the two args bucket->irq_info->pre_handler_arg[12]. The Schizo PCI driver is converted over to use a pre-handler for the DMA write-sync processing it needs when a device is behind a PCI->PCI bus deeper than the top-level APB bridges. While we're here, clean up all of the action allocation and handling. Now, we allocate the irqaction as part of the bucket->irq_info area. There is an array of 4 irqaction (for PCI irq sharing) and a bitmask saying which entries are active. The bucket->irq_info is allocated at build_irq() time, not at request_irq() time. This simplifies request_irq() and free_irq() tremendously. The SMP dynamic IRQ retargetting code got removed in this change too. It was disabled for a few months now, and we can resurrect it in the future if we want. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05 03:24:38 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */
stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */
stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */
wr %g2, 0x0, %set_softint
retry
do_ivec_xcall:
mov 0x50, %g1
ldxa [%g1 + %g0] ASI_INTR_R, %g1
srl %g3, 0, %g3
[SPARC64]: Add support for IRQ pre-handlers. This allows a PCI controller to shim into IRQ delivery so that DMA queues can be drained, if necessary. If some bus specific code needs to run before an IRQ handler is invoked, the bus driver simply needs to setup the function pointer in bucket->irq_info->pre_handler and the two args bucket->irq_info->pre_handler_arg[12]. The Schizo PCI driver is converted over to use a pre-handler for the DMA write-sync processing it needs when a device is behind a PCI->PCI bus deeper than the top-level APB bridges. While we're here, clean up all of the action allocation and handling. Now, we allocate the irqaction as part of the bucket->irq_info area. There is an array of 4 irqaction (for PCI irq sharing) and a bitmask saying which entries are active. The bucket->irq_info is allocated at build_irq() time, not at request_irq() time. This simplifies request_irq() and free_irq() tremendously. The SMP dynamic IRQ retargetting code got removed in this change too. It was disabled for a few months now, and we can resurrect it in the future if we want. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05 03:24:38 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mov 0x60, %g7
ldxa [%g7 + %g0] ASI_INTR_R, %g7
stxa %g0, [%g0] ASI_INTR_RECEIVE
membar #Sync
ba,pt %xcc, 1f
nop
.align 32
1: jmpl %g3, %g0
nop
.globl save_alternate_globals
save_alternate_globals: /* %o0 = save_area */
rdpr %pstate, %o5
andn %o5, PSTATE_IE, %o1
wrpr %o1, PSTATE_AG, %pstate
stx %g0, [%o0 + 0x00]
stx %g1, [%o0 + 0x08]
stx %g2, [%o0 + 0x10]
stx %g3, [%o0 + 0x18]
stx %g4, [%o0 + 0x20]
stx %g5, [%o0 + 0x28]
stx %g6, [%o0 + 0x30]
stx %g7, [%o0 + 0x38]
wrpr %o1, PSTATE_IG, %pstate
stx %g0, [%o0 + 0x40]
stx %g1, [%o0 + 0x48]
stx %g2, [%o0 + 0x50]
stx %g3, [%o0 + 0x58]
stx %g4, [%o0 + 0x60]
stx %g5, [%o0 + 0x68]
stx %g6, [%o0 + 0x70]
stx %g7, [%o0 + 0x78]
wrpr %o1, PSTATE_MG, %pstate
stx %g0, [%o0 + 0x80]
stx %g1, [%o0 + 0x88]
stx %g2, [%o0 + 0x90]
stx %g3, [%o0 + 0x98]
stx %g4, [%o0 + 0xa0]
stx %g5, [%o0 + 0xa8]
stx %g6, [%o0 + 0xb0]
stx %g7, [%o0 + 0xb8]
wrpr %o5, 0x0, %pstate
retl
nop
.globl restore_alternate_globals
restore_alternate_globals: /* %o0 = save_area */
rdpr %pstate, %o5
andn %o5, PSTATE_IE, %o1
wrpr %o1, PSTATE_AG, %pstate
ldx [%o0 + 0x00], %g0
ldx [%o0 + 0x08], %g1
ldx [%o0 + 0x10], %g2
ldx [%o0 + 0x18], %g3
ldx [%o0 + 0x20], %g4
ldx [%o0 + 0x28], %g5
ldx [%o0 + 0x30], %g6
ldx [%o0 + 0x38], %g7
wrpr %o1, PSTATE_IG, %pstate
ldx [%o0 + 0x40], %g0
ldx [%o0 + 0x48], %g1
ldx [%o0 + 0x50], %g2
ldx [%o0 + 0x58], %g3
ldx [%o0 + 0x60], %g4
ldx [%o0 + 0x68], %g5
ldx [%o0 + 0x70], %g6
ldx [%o0 + 0x78], %g7
wrpr %o1, PSTATE_MG, %pstate
ldx [%o0 + 0x80], %g0
ldx [%o0 + 0x88], %g1
ldx [%o0 + 0x90], %g2
ldx [%o0 + 0x98], %g3
ldx [%o0 + 0xa0], %g4
ldx [%o0 + 0xa8], %g5
ldx [%o0 + 0xb0], %g6
ldx [%o0 + 0xb8], %g7
wrpr %o5, 0x0, %pstate
retl
nop
.globl getcc, setcc
getcc:
ldx [%o0 + PT_V9_TSTATE], %o1
srlx %o1, 32, %o1
and %o1, 0xf, %o1
retl
stx %o1, [%o0 + PT_V9_G1]
setcc:
ldx [%o0 + PT_V9_TSTATE], %o1
ldx [%o0 + PT_V9_G1], %o2
or %g0, %ulo(TSTATE_ICC), %o3
sllx %o3, 32, %o3
andn %o1, %o3, %o1
sllx %o2, 32, %o2
and %o2, %o3, %o2
or %o1, %o2, %o1
retl
stx %o1, [%o0 + PT_V9_TSTATE]
.globl utrap, utrap_ill
utrap: brz,pn %g1, etrap
nop
save %sp, -128, %sp
rdpr %tstate, %l6
rdpr %cwp, %l7
andn %l6, TSTATE_CWP, %l6
wrpr %l6, %l7, %tstate
rdpr %tpc, %l6
rdpr %tnpc, %l7
wrpr %g1, 0, %tnpc
done
utrap_ill:
call bad_trap
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* XXX Here is stuff we still need to write... -DaveM XXX */
.globl netbsd_syscall
netbsd_syscall:
retl
nop
/* These next few routines must be sure to clear the
* SFSR FaultValid bit so that the fast tlb data protection
* handler does not flush the wrong context and lock up the
* box.
*/
.globl __do_data_access_exception
.globl __do_data_access_exception_tl1
__do_data_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
ba,pt %xcc, winfix_dax
rdpr %tpc, %g3
__do_data_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl __do_instruction_access_exception
.globl __do_instruction_access_exception_tl1
__do_instruction_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etraptl1
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call instruction_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
__do_instruction_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call instruction_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* This is the trap handler entry point for ECC correctable
* errors. They are corrected, but we listen for the trap
* so that the event can be logged.
*
* Disrupting errors are either:
* 1) single-bit ECC errors during UDB reads to system
* memory
* 2) data parity errors during write-back events
*
* As far as I can make out from the manual, the CEE trap
* is only for correctable errors during memory read
* accesses by the front-end of the processor.
*
* The code below is only for trap level 1 CEE events,
* as it is the only situation where we can safely record
* and log. For trap level >1 we just clear the CE bit
* in the AFSR and return.
*/
/* Our trap handling infrastructure allows us to preserve
* two 64-bit values during etrap for arguments to
* subsequent C code. Therefore we encode the information
* as follows:
*
* value 1) Full 64-bits of AFAR
* value 2) Low 33-bits of AFSR, then bits 33-->42
* are UDBL error status and bits 43-->52
* are UDBH error status
*/
.align 64
.globl cee_trap
cee_trap:
ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR
ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR
sllx %g1, 31, %g1 ! Clear reserved bits
srlx %g1, 31, %g1 ! in AFSR
/* NOTE: UltraSparc-I/II have high and low UDB error
* registers, corresponding to the two UDB units
* present on those chips. UltraSparc-IIi only
* has a single UDB, called "SDB" in the manual.
* For IIi the upper UDB register always reads
* as zero so for our purposes things will just
* work with the checks below.
*/
ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-Low error status
sllx %g3, (33 + 0), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
nop
stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL
membar #Sync ! Synchronize ASI stores
1: mov 0x18, %g5 ! Addr of UDB-High error status
ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-High error status
sllx %g3, (33 + 10), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
nop
nop
stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH
membar #Sync ! Synchronize ASI stores
1: mov 1, %g5 ! AFSR CE bit is
sllx %g5, 20, %g5 ! bit 20
stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR
membar #Sync ! Synchronize ASI stores
sllx %g2, (64 - 41), %g2 ! Clear reserved bits
srlx %g2, (64 - 41), %g2 ! in latched AFAR
andn %g2, 0x0f, %g2 ! Finish resv bit clearing
mov %g1, %g4 ! Move AFSR+UDB* into save reg
mov %g2, %g5 ! Move AFAR into save reg
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o0
mov %l5, %o1
call cee_log
add %sp, PTREGS_OFF, %o2
ba,a,pt %xcc, rtrap_irq
/* Capture I/D/E-cache state into per-cpu error scoreboard.
*
* %g1: (TL>=0) ? 1 : 0
* %g2: scratch
* %g3: scratch
* %g4: AFSR
* %g5: AFAR
* %g6: current thread ptr
* %g7: scratch
*/
#define CHEETAH_LOG_ERROR \
/* Put "TL1" software bit into AFSR. */ \
and %g1, 0x1, %g1; \
sllx %g1, 63, %g2; \
or %g4, %g2, %g4; \
/* Get log entry pointer for this cpu at this trap level. */ \
BRANCH_IF_JALAPENO(g2,g3,50f) \
ldxa [%g0] ASI_SAFARI_CONFIG, %g2; \
srlx %g2, 17, %g2; \
ba,pt %xcc, 60f; \
and %g2, 0x3ff, %g2; \
50: ldxa [%g0] ASI_JBUS_CONFIG, %g2; \
srlx %g2, 17, %g2; \
and %g2, 0x1f, %g2; \
60: sllx %g2, 9, %g2; \
sethi %hi(cheetah_error_log), %g3; \
ldx [%g3 + %lo(cheetah_error_log)], %g3; \
brz,pn %g3, 80f; \
nop; \
add %g3, %g2, %g3; \
sllx %g1, 8, %g1; \
add %g3, %g1, %g1; \
/* %g1 holds pointer to the top of the logging scoreboard */ \
ldx [%g1 + 0x0], %g7; \
cmp %g7, -1; \
bne,pn %xcc, 80f; \
nop; \
stx %g4, [%g1 + 0x0]; \
stx %g5, [%g1 + 0x8]; \
add %g1, 0x10, %g1; \
/* %g1 now points to D-cache logging area */ \
set 0x3ff8, %g2; /* DC_addr mask */ \
and %g5, %g2, %g2; /* DC_addr bits of AFAR */ \
srlx %g5, 12, %g3; \
or %g3, 1, %g3; /* PHYS tag + valid */ \
10: ldxa [%g2] ASI_DCACHE_TAG, %g7; \
cmp %g3, %g7; /* TAG match? */ \
bne,pt %xcc, 13f; \
nop; \
/* Yep, what we want, capture state. */ \
stx %g2, [%g1 + 0x20]; \
stx %g7, [%g1 + 0x28]; \
/* A membar Sync is required before and after utag access. */ \
membar #Sync; \
ldxa [%g2] ASI_DCACHE_UTAG, %g7; \
membar #Sync; \
stx %g7, [%g1 + 0x30]; \
ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7; \
stx %g7, [%g1 + 0x38]; \
clr %g3; \
12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7; \
stx %g7, [%g1]; \
add %g3, (1 << 5), %g3; \
cmp %g3, (4 << 5); \
bl,pt %xcc, 12b; \
add %g1, 0x8, %g1; \
ba,pt %xcc, 20f; \
add %g1, 0x20, %g1; \
13: sethi %hi(1 << 14), %g7; \
add %g2, %g7, %g2; \
srlx %g2, 14, %g7; \
cmp %g7, 4; \
bl,pt %xcc, 10b; \
nop; \
add %g1, 0x40, %g1; \
20: /* %g1 now points to I-cache logging area */ \
set 0x1fe0, %g2; /* IC_addr mask */ \
and %g5, %g2, %g2; /* IC_addr bits of AFAR */ \
sllx %g2, 1, %g2; /* IC_addr[13:6]==VA[12:5] */ \
srlx %g5, (13 - 8), %g3; /* Make PTAG */ \
andn %g3, 0xff, %g3; /* Mask off undefined bits */ \
21: ldxa [%g2] ASI_IC_TAG, %g7; \
andn %g7, 0xff, %g7; \
cmp %g3, %g7; \
bne,pt %xcc, 23f; \
nop; \
/* Yep, what we want, capture state. */ \
stx %g2, [%g1 + 0x40]; \
stx %g7, [%g1 + 0x48]; \
add %g2, (1 << 3), %g2; \
ldxa [%g2] ASI_IC_TAG, %g7; \
add %g2, (1 << 3), %g2; \
stx %g7, [%g1 + 0x50]; \
ldxa [%g2] ASI_IC_TAG, %g7; \
add %g2, (1 << 3), %g2; \
stx %g7, [%g1 + 0x60]; \
ldxa [%g2] ASI_IC_TAG, %g7; \
stx %g7, [%g1 + 0x68]; \
sub %g2, (3 << 3), %g2; \
ldxa [%g2] ASI_IC_STAG, %g7; \
stx %g7, [%g1 + 0x58]; \
clr %g3; \
srlx %g2, 2, %g2; \
22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7; \
stx %g7, [%g1]; \
add %g3, (1 << 3), %g3; \
cmp %g3, (8 << 3); \
bl,pt %xcc, 22b; \
add %g1, 0x8, %g1; \
ba,pt %xcc, 30f; \
add %g1, 0x30, %g1; \
23: sethi %hi(1 << 14), %g7; \
add %g2, %g7, %g2; \
srlx %g2, 14, %g7; \
cmp %g7, 4; \
bl,pt %xcc, 21b; \
nop; \
add %g1, 0x70, %g1; \
30: /* %g1 now points to E-cache logging area */ \
andn %g5, (32 - 1), %g2; /* E-cache subblock */ \
stx %g2, [%g1 + 0x20]; \
ldxa [%g2] ASI_EC_TAG_DATA, %g7; \
stx %g7, [%g1 + 0x28]; \
ldxa [%g2] ASI_EC_R, %g0; \
clr %g3; \
31: ldxa [%g3] ASI_EC_DATA, %g7; \
stx %g7, [%g1 + %g3]; \
add %g3, 0x8, %g3; \
cmp %g3, 0x20; \
bl,pt %xcc, 31b; \
nop; \
80: /* DONE */
/* These get patched into the trap table at boot time
* once we know we have a cheetah processor.
*/
.globl cheetah_fecc_trap_vector, cheetah_fecc_trap_vector_tl1
cheetah_fecc_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_DC | DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_fast_ecc), %g2
jmpl %g2 + %lo(cheetah_fast_ecc), %g0
mov 0, %g1
cheetah_fecc_trap_vector_tl1:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_DC | DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_fast_ecc), %g2
jmpl %g2 + %lo(cheetah_fast_ecc), %g0
mov 1, %g1
.globl cheetah_cee_trap_vector, cheetah_cee_trap_vector_tl1
cheetah_cee_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_cee), %g2
jmpl %g2 + %lo(cheetah_cee), %g0
mov 0, %g1
cheetah_cee_trap_vector_tl1:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_cee), %g2
jmpl %g2 + %lo(cheetah_cee), %g0
mov 1, %g1
.globl cheetah_deferred_trap_vector, cheetah_deferred_trap_vector_tl1
cheetah_deferred_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1;
andn %g1, DCU_DC | DCU_IC, %g1;
stxa %g1, [%g0] ASI_DCU_CONTROL_REG;
membar #Sync;
sethi %hi(cheetah_deferred_trap), %g2
jmpl %g2 + %lo(cheetah_deferred_trap), %g0
mov 0, %g1
cheetah_deferred_trap_vector_tl1:
membar #Sync;
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1;
andn %g1, DCU_DC | DCU_IC, %g1;
stxa %g1, [%g0] ASI_DCU_CONTROL_REG;
membar #Sync;
sethi %hi(cheetah_deferred_trap), %g2
jmpl %g2 + %lo(cheetah_deferred_trap), %g0
mov 1, %g1
/* Cheetah+ specific traps. These are for the new I/D cache parity
* error traps. The first argument to cheetah_plus_parity_handler
* is encoded as follows:
*
* Bit0: 0=dcache,1=icache
* Bit1: 0=recoverable,1=unrecoverable
*/
.globl cheetah_plus_dcpe_trap_vector, cheetah_plus_dcpe_trap_vector_tl1
cheetah_plus_dcpe_trap_vector:
membar #Sync
sethi %hi(do_cheetah_plus_data_parity), %g7
jmpl %g7 + %lo(do_cheetah_plus_data_parity), %g0
nop
nop
nop
nop
nop
do_cheetah_plus_data_parity:
ba,pt %xcc, etrap
rd %pc, %g7
mov 0x0, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
cheetah_plus_dcpe_trap_vector_tl1:
membar #Sync
wrpr PSTATE_IG | PSTATE_PEF | PSTATE_PRIV, %pstate
sethi %hi(do_dcpe_tl1), %g3
jmpl %g3 + %lo(do_dcpe_tl1), %g0
nop
nop
nop
nop
.globl cheetah_plus_icpe_trap_vector, cheetah_plus_icpe_trap_vector_tl1
cheetah_plus_icpe_trap_vector:
membar #Sync
sethi %hi(do_cheetah_plus_insn_parity), %g7
jmpl %g7 + %lo(do_cheetah_plus_insn_parity), %g0
nop
nop
nop
nop
nop
do_cheetah_plus_insn_parity:
ba,pt %xcc, etrap
rd %pc, %g7
mov 0x1, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
cheetah_plus_icpe_trap_vector_tl1:
membar #Sync
wrpr PSTATE_IG | PSTATE_PEF | PSTATE_PRIV, %pstate
sethi %hi(do_icpe_tl1), %g3
jmpl %g3 + %lo(do_icpe_tl1), %g0
nop
nop
nop
nop
/* If we take one of these traps when tl >= 1, then we
* jump to interrupt globals. If some trap level above us
* was also using interrupt globals, we cannot recover.
* We may use all interrupt global registers except %g6.
*/
.globl do_dcpe_tl1, do_icpe_tl1
do_dcpe_tl1:
rdpr %tl, %g1 ! Save original trap level
mov 1, %g2 ! Setup TSTATE checking loop
sethi %hi(TSTATE_IG), %g3 ! TSTATE mask bit
1: wrpr %g2, %tl ! Set trap level to check
rdpr %tstate, %g4 ! Read TSTATE for this level
andcc %g4, %g3, %g0 ! Interrupt globals in use?
bne,a,pn %xcc, do_dcpe_tl1_fatal ! Yep, irrecoverable
wrpr %g1, %tl ! Restore original trap level
add %g2, 1, %g2 ! Next trap level
cmp %g2, %g1 ! Hit them all yet?
ble,pt %icc, 1b ! Not yet
nop
wrpr %g1, %tl ! Restore original trap level
do_dcpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
/* Reset D-cache parity */
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
sub %g1, %g2, %g1 ! Move down 1 cacheline
1: srl %g1, 14, %g3 ! Compute UTAG
membar #Sync
stxa %g3, [%g1] ASI_DCACHE_UTAG
membar #Sync
sub %g2, 8, %g3 ! 64-bit data word within line
2: membar #Sync
stxa %g0, [%g1 + %g3] ASI_DCACHE_DATA
membar #Sync
subcc %g3, 8, %g3 ! Next 64-bit data word
bge,pt %icc, 2b
nop
subcc %g1, %g2, %g1 ! Next cacheline
bge,pt %icc, 1b
nop
ba,pt %xcc, dcpe_icpe_tl1_common
nop
do_dcpe_tl1_fatal:
sethi %hi(1f), %g7
ba,pt %xcc, etraptl1
1: or %g7, %lo(1b), %g7
mov 0x2, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
do_icpe_tl1:
rdpr %tl, %g1 ! Save original trap level
mov 1, %g2 ! Setup TSTATE checking loop
sethi %hi(TSTATE_IG), %g3 ! TSTATE mask bit
1: wrpr %g2, %tl ! Set trap level to check
rdpr %tstate, %g4 ! Read TSTATE for this level
andcc %g4, %g3, %g0 ! Interrupt globals in use?
bne,a,pn %xcc, do_icpe_tl1_fatal ! Yep, irrecoverable
wrpr %g1, %tl ! Restore original trap level
add %g2, 1, %g2 ! Next trap level
cmp %g2, %g1 ! Hit them all yet?
ble,pt %icc, 1b ! Not yet
nop
wrpr %g1, %tl ! Restore original trap level
do_icpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
/* Flush I-cache */
sethi %hi(1 << 15), %g1 ! I-cache size
mov (1 << 5), %g2 ! I-cache line size
sub %g1, %g2, %g1
1: or %g1, (2 << 3), %g3
stxa %g0, [%g3] ASI_IC_TAG
membar #Sync
subcc %g1, %g2, %g1
bge,pt %icc, 1b
nop
ba,pt %xcc, dcpe_icpe_tl1_common
nop
do_icpe_tl1_fatal:
sethi %hi(1f), %g7
ba,pt %xcc, etraptl1
1: or %g7, %lo(1b), %g7
mov 0x3, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
dcpe_icpe_tl1_common:
/* Flush D-cache, re-enable D/I caches in DCU and finally
* retry the trapping instruction.
*/
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
sub %g1, %g2, %g1
1: stxa %g0, [%g1] ASI_DCACHE_TAG
membar #Sync
subcc %g1, %g2, %g1
bge,pt %icc, 1b
nop
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
or %g1, (DCU_DC | DCU_IC), %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
retry
/* Cheetah FECC trap handling, we get here from tl{0,1}_fecc
* in the trap table. That code has done a memory barrier
* and has disabled both the I-cache and D-cache in the DCU
* control register. The I-cache is disabled so that we may
* capture the corrupted cache line, and the D-cache is disabled
* because corrupt data may have been placed there and we don't
* want to reference it.
*
* %g1 is one if this trap occurred at %tl >= 1.
*
* Next, we turn off error reporting so that we don't recurse.
*/
.globl cheetah_fast_ecc
cheetah_fast_ecc:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_NCEEN | ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_fecc_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
/* Our caller has disabled I-cache and performed membar Sync. */
.globl cheetah_cee
cheetah_cee:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_cee_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
/* Our caller has disabled I-cache+D-cache and performed membar Sync. */
.globl cheetah_deferred_trap
cheetah_deferred_trap:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_NCEEN | ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_deferred_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
.globl __do_privact
__do_privact:
mov TLB_SFSR, %g3
stxa %g0, [%g3] ASI_DMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
call do_privact
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_mna
do_mna:
rdpr %tl, %g3
cmp %g3, 1
/* Setup %g4/%g5 now as they are used in the
* winfixup code.
*/
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ldxa [%g3] ASI_DMMU, %g5
stxa %g0, [%g3] ASI_DMMU ! Clear FaultValid bit
membar #Sync
bgu,pn %icc, winfix_mna
rdpr %tpc, %g3
1: sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_lddfmna
do_lddfmna:
sethi %hi(109f), %g7
mov TLB_SFSR, %g4
ldxa [%g4] ASI_DMMU, %g5
stxa %g0, [%g4] ASI_DMMU ! Clear FaultValid bit
membar #Sync
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call handle_lddfmna
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_stdfmna
do_stdfmna:
sethi %hi(109f), %g7
mov TLB_SFSR, %g4
ldxa [%g4] ASI_DMMU, %g5
stxa %g0, [%g4] ASI_DMMU ! Clear FaultValid bit
membar #Sync
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call handle_stdfmna
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl breakpoint_trap
breakpoint_trap:
call sparc_breakpoint
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
/* SunOS uses syscall zero as the 'indirect syscall' it looks
* like indir_syscall(scall_num, arg0, arg1, arg2...); etc.
* This is complete brain damage.
*/
.globl sunos_indir
sunos_indir:
srl %o0, 0, %o0
mov %o7, %l4
cmp %o0, NR_SYSCALLS
blu,a,pt %icc, 1f
sll %o0, 0x2, %o0
sethi %hi(sunos_nosys), %l6
b,pt %xcc, 2f
or %l6, %lo(sunos_nosys), %l6
1: sethi %hi(sunos_sys_table), %l7
or %l7, %lo(sunos_sys_table), %l7
lduw [%l7 + %o0], %l6
2: mov %o1, %o0
mov %o2, %o1
mov %o3, %o2
mov %o4, %o3
mov %o5, %o4
call %l6
mov %l4, %o7
.globl sunos_getpid
sunos_getpid:
call sys_getppid
nop
call sys_getpid
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
/* SunOS getuid() returns uid in %o0 and euid in %o1 */
.globl sunos_getuid
sunos_getuid:
call sys32_geteuid16
nop
call sys32_getuid16
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
/* SunOS getgid() returns gid in %o0 and egid in %o1 */
.globl sunos_getgid
sunos_getgid:
call sys32_getegid16
nop
call sys32_getgid16
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
#endif
/* SunOS's execv() call only specifies the argv argument, the
* environment settings are the same as the calling processes.
*/
.globl sunos_execv
sys_execve:
sethi %hi(sparc_execve), %g1
ba,pt %xcc, execve_merge
or %g1, %lo(sparc_execve), %g1
#ifdef CONFIG_COMPAT
.globl sys_execve
sunos_execv:
stx %g0, [%sp + PTREGS_OFF + PT_V9_I2]
.globl sys32_execve
sys32_execve:
sethi %hi(sparc32_execve), %g1
or %g1, %lo(sparc32_execve), %g1
#endif
execve_merge:
flushw
jmpl %g1, %g0
add %sp, PTREGS_OFF, %o0
.globl sys_pipe, sys_sigpause, sys_nis_syscall
.globl sys_sigsuspend, sys_rt_sigsuspend
.globl sys_rt_sigreturn
.globl sys_ptrace
.globl sys_sigaltstack
.align 32
sys_pipe: ba,pt %xcc, sparc_pipe
add %sp, PTREGS_OFF, %o0
sys_nis_syscall:ba,pt %xcc, c_sys_nis_syscall
add %sp, PTREGS_OFF, %o0
sys_memory_ordering:
ba,pt %xcc, sparc_memory_ordering
add %sp, PTREGS_OFF, %o1
sys_sigaltstack:ba,pt %xcc, do_sigaltstack
add %i6, STACK_BIAS, %o2
#ifdef CONFIG_COMPAT
.globl sys32_sigstack
sys32_sigstack: ba,pt %xcc, do_sys32_sigstack
mov %i6, %o2
.globl sys32_sigaltstack
sys32_sigaltstack:
ba,pt %xcc, do_sys32_sigaltstack
mov %i6, %o2
#endif
.align 32
sys_sigsuspend: add %sp, PTREGS_OFF, %o0
call do_sigsuspend
add %o7, 1f-.-4, %o7
nop
sys_rt_sigsuspend: /* NOTE: %o0,%o1 have a correct value already */
add %sp, PTREGS_OFF, %o2
call do_rt_sigsuspend
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_rt_sigsuspend
sys32_rt_sigsuspend: /* NOTE: %o0,%o1 have a correct value already */
srl %o0, 0, %o0
add %sp, PTREGS_OFF, %o2
call do_rt_sigsuspend32
add %o7, 1f-.-4, %o7
#endif
/* NOTE: %o0 has a correct value already */
sys_sigpause: add %sp, PTREGS_OFF, %o1
call do_sigpause
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_sigreturn
sys32_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_sigreturn32
add %o7, 1f-.-4, %o7
nop
#endif
sys_rt_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_rt_sigreturn
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_rt_sigreturn
sys32_rt_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_rt_sigreturn32
add %o7, 1f-.-4, %o7
nop
#endif
sys_ptrace: add %sp, PTREGS_OFF, %o0
call do_ptrace
add %o7, 1f-.-4, %o7
nop
.align 32
1: ldx [%curptr + TI_FLAGS], %l5
[SPARC64]: Add syscall auditing support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 09:29:45 +07:00
andcc %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
be,pt %icc, rtrap
clr %l6
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
add %sp, PTREGS_OFF, %o0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
call syscall_trace
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
mov 1, %o1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
ba,pt %xcc, rtrap
clr %l6
/* This is how fork() was meant to be done, 8 instruction entry.
*
* I questioned the following code briefly, let me clear things
* up so you must not reason on it like I did.
*
* Know the fork_kpsr etc. we use in the sparc32 port? We don't
* need it here because the only piece of window state we copy to
* the child is the CWP register. Even if the parent sleeps,
* we are safe because we stuck it into pt_regs of the parent
* so it will not change.
*
* XXX This raises the question, whether we can do the same on
* XXX sparc32 to get rid of fork_kpsr _and_ fork_kwim. The
* XXX answer is yes. We stick fork_kpsr in UREG_G0 and
* XXX fork_kwim in UREG_G1 (global registers are considered
* XXX volatile across a system call in the sparc ABI I think
* XXX if it isn't we can use regs->y instead, anyone who depends
* XXX upon the Y register being preserved across a fork deserves
* XXX to lose).
*
* In fact we should take advantage of that fact for other things
* during system calls...
*/
.globl sys_fork, sys_vfork, sys_clone, sparc_exit
.globl ret_from_syscall
.align 32
sys_vfork: /* Under Linux, vfork and fork are just special cases of clone. */
sethi %hi(0x4000 | 0x0100 | SIGCHLD), %o0
or %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
ba,pt %xcc, sys_clone
sys_fork: clr %o1
mov SIGCHLD, %o0
sys_clone: flushw
movrz %o1, %fp, %o1
mov 0, %o3
ba,pt %xcc, sparc_do_fork
add %sp, PTREGS_OFF, %o2
ret_from_syscall:
[SPARC64]: Move syscall success and newchild state out of thread flags. These two bits were accesses non-atomically from assembler code. So, in order to eliminate any potential races resulting from that, move these pieces of state into two bytes elsewhere in struct thread_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25 09:36:26 +07:00
/* Clear current_thread_info()->new_child, and
* check performance counter stuff too.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
[SPARC64]: Move syscall success and newchild state out of thread flags. These two bits were accesses non-atomically from assembler code. So, in order to eliminate any potential races resulting from that, move these pieces of state into two bytes elsewhere in struct thread_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25 09:36:26 +07:00
stb %g0, [%g6 + TI_NEW_CHILD]
ldx [%g6 + TI_FLAGS], %l0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
call schedule_tail
mov %g7, %o0
andcc %l0, _TIF_PERFCTR, %g0
be,pt %icc, 1f
nop
ldx [%g6 + TI_PCR], %o7
wr %g0, %o7, %pcr
/* Blackbird errata workaround. See commentary in
* smp.c:smp_percpu_timer_interrupt() for more
* information.
*/
ba,pt %xcc, 99f
nop
.align 64
99: wr %g0, %g0, %pic
rd %pic, %g0
1: b,pt %xcc, ret_sys_call
ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0
sparc_exit: wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV), %pstate
rdpr %otherwin, %g1
rdpr %cansave, %g3
add %g3, %g1, %g3
wrpr %g3, 0x0, %cansave
wrpr %g0, 0x0, %otherwin
wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE), %pstate
ba,pt %xcc, sys_exit
stb %g0, [%g6 + TI_WSAVED]
linux_sparc_ni_syscall:
sethi %hi(sys_ni_syscall), %l7
b,pt %xcc, 4f
or %l7, %lo(sys_ni_syscall), %l7
linux_syscall_trace32:
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
add %sp, PTREGS_OFF, %o0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
call syscall_trace
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
clr %o1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
srl %i0, 0, %o0
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
srl %i4, 0, %o4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
srl %i1, 0, %o1
srl %i2, 0, %o2
b,pt %xcc, 2f
srl %i3, 0, %o3
linux_syscall_trace:
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
add %sp, PTREGS_OFF, %o0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
call syscall_trace
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
clr %o1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mov %i0, %o0
mov %i1, %o1
mov %i2, %o2
mov %i3, %o3
b,pt %xcc, 2f
mov %i4, %o4
/* Linux 32-bit and SunOS system calls enter here... */
.align 32
.globl linux_sparc_syscall32
linux_sparc_syscall32:
/* Direct access to user regs, much faster. */
cmp %g1, NR_SYSCALLS ! IEU1 Group
bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI
srl %i0, 0, %o0 ! IEU0
sll %g1, 2, %l4 ! IEU0 Group
srl %i4, 0, %o4 ! IEU1
lduw [%l7 + %l4], %l7 ! Load
srl %i1, 0, %o1 ! IEU0 Group
ldx [%curptr + TI_FLAGS], %l0 ! Load
srl %i5, 0, %o5 ! IEU1
srl %i2, 0, %o2 ! IEU0 Group
[SPARC64]: Add syscall auditing support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 09:29:45 +07:00
andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bne,pn %icc, linux_syscall_trace32 ! CTI
mov %i0, %l5 ! IEU1
call %l7 ! CTI Group brk forced
srl %i3, 0, %o3 ! IEU0
ba,a,pt %xcc, 3f
/* Linux native and SunOS system calls enter here... */
.align 32
.globl linux_sparc_syscall, ret_sys_call
linux_sparc_syscall:
/* Direct access to user regs, much faster. */
cmp %g1, NR_SYSCALLS ! IEU1 Group
bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI
mov %i0, %o0 ! IEU0
sll %g1, 2, %l4 ! IEU0 Group
mov %i1, %o1 ! IEU1
lduw [%l7 + %l4], %l7 ! Load
4: mov %i2, %o2 ! IEU0 Group
ldx [%curptr + TI_FLAGS], %l0 ! Load
mov %i3, %o3 ! IEU1
mov %i4, %o4 ! IEU0 Group
[SPARC64]: Add syscall auditing support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 09:29:45 +07:00
andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bne,pn %icc, linux_syscall_trace ! CTI Group
mov %i0, %l5 ! IEU0
2: call %l7 ! CTI Group brk forced
mov %i5, %o5 ! IEU0
nop
3: stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
ret_sys_call:
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
sra %o0, 0, %o0
mov %ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
sllx %g2, 32, %g2
/* Check if force_successful_syscall_return()
* was invoked.
*/
[SPARC64]: Move syscall success and newchild state out of thread flags. These two bits were accesses non-atomically from assembler code. So, in order to eliminate any potential races resulting from that, move these pieces of state into two bytes elsewhere in struct thread_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25 09:36:26 +07:00
ldub [%curptr + TI_SYS_NOERROR], %l0
brz,pt %l0, 1f
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
ba,pt %xcc, 80f
[SPARC64]: Move syscall success and newchild state out of thread flags. These two bits were accesses non-atomically from assembler code. So, in order to eliminate any potential races resulting from that, move these pieces of state into two bytes elsewhere in struct thread_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25 09:36:26 +07:00
stb %g0, [%curptr + TI_SYS_NOERROR]
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
1:
cmp %o0, -ERESTART_RESTARTBLOCK
bgeu,pn %xcc, 1f
[SPARC64]: Add syscall auditing support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 09:29:45 +07:00
andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %l6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
80:
/* System call success, clear Carry condition code. */
andn %g3, %g2, %g3
stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
bne,pn %icc, linux_syscall_trace2
add %l1, 0x4, %l2 ! npc = npc+4
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
ba,pt %xcc, rtrap_clr_l6
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
1:
/* System call failure, set Carry condition code.
* Also, get abs(errno) to return to the process.
*/
[SPARC64]: Add syscall auditing support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 09:29:45 +07:00
andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %l6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sub %g0, %o0, %o0
or %g3, %g2, %g3
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
mov 1, %l6
stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
bne,pn %icc, linux_syscall_trace2
add %l1, 0x4, %l2 ! npc = npc+4
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
b,pt %xcc, rtrap
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
linux_syscall_trace2:
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
add %sp, PTREGS_OFF, %o0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
call syscall_trace
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace() Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 06:55:48 +07:00
mov 1, %o1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
ba,pt %xcc, rtrap
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
.align 32
.globl __flushw_user
__flushw_user:
rdpr %otherwin, %g1
brz,pn %g1, 2f
clr %g2
1: save %sp, -128, %sp
rdpr %otherwin, %g1
brnz,pt %g1, 1b
add %g2, 1, %g2
1: sub %g2, 1, %g2
brnz,pt %g2, 1b
restore %g0, %g0, %g0
2: retl
nop
Reference in New Issue Copy Permalink