AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 11:56:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
020f46a39e
linux_dsm_epyc7002/arch/sparc64/kernel/entry.S

1920 lines
48 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* $Id: entry.S,v 1.144 2002/02/09 19:49:30 davem Exp $
* arch/sparc64/kernel/entry.S: Sparc64 trap low-level entry points.
*
* Copyright (C) 1995,1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1996,98,99 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <asm/head.h>
#include <asm/asi.h>
#include <asm/smp.h>
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/visasm.h>
#include <asm/estate.h>
#include <asm/auxio.h>
/* #define SYSCALL_TRACING 1 */
#define curptr g6
#define NR_SYSCALLS 284 /* Each OS is different... */
.text
.align 32
.globl sparc64_vpte_patchme1
.globl sparc64_vpte_patchme2
/*
* On a second level vpte miss, check whether the original fault is to the OBP
* range (note that this is only possible for instruction miss, data misses to
* obp range do not use vpte). If so, go back directly to the faulting address.
* This is because we want to read the tpc, otherwise we have no way of knowing
* the 8k aligned faulting address if we are using >8k kernel pagesize. This
* also ensures no vpte range addresses are dropped into tlb while obp is
* executing (see inherit_locked_prom_mappings() rant).
*/
sparc64_vpte_nucleus:
/* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
mov 0xf, %g5
sllx %g5, 28, %g5
/* Is addr >= LOW_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, sparc64_vpte_patchme1
mov 0x1, %g5
/* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
/* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_iaddr_patch
nop
/* These two instructions are patched by paginig_init(). */
sparc64_vpte_patchme1:
sethi %hi(0), %g5
sparc64_vpte_patchme2:
or %g5, %lo(0), %g5
/* With kernel PGD in %g5, branch back into dtlb_backend. */
ba,pt %xcc, sparc64_kpte_continue
andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
vpte_noent:
/* Restore previous TAG_ACCESS, %g5 is zero, and we will
* skip over the trap instruction so that the top level
* TLB miss handler will thing this %g5 value is just an
* invalid PTE, thus branching to full fault processing.
*/
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_DMMU
done
.globl obp_iaddr_patch
obp_iaddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Behave as if we are at TL0. */
wrpr %g0, 1, %tl
rdpr %tpc, %g4 /* Find original faulting iaddr */
srlx %g4, 13, %g4 /* Throw out context bits */
sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
/* Restore previous TAG_ACCESS. */
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_IMMU
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
.globl obp_daddr_patch
obp_daddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
/*
* On a first level data miss, check whether this is to the OBP range (note
* that such accesses can be made by prom, as well as by kernel using
* prom_getproperty on "address"), and if so, do not use vpte access ...
* rather, use information saved during inherit_prom_mappings() using 8k
* pagesize.
*/
kvmap:
/* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
mov 0xf, %g5
sllx %g5, 28, %g5
/* Is addr >= LOW_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, vmalloc_addr
mov 0x1, %g5
/* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
/* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_daddr_patch
nop
vmalloc_addr:
/* If we get here, a vmalloc addr accessed, load kernel VPTE. */
ldxa [%g3 + %g6] ASI_N, %g5
brgez,pn %g5, longpath
nop
/* PTE is valid, load into TLB and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry
/* This is trivial with the new code... */
.globl do_fpdis
do_fpdis:
sethi %hi(TSTATE_PEF), %g4 ! IEU0
rdpr %tstate, %g5
andcc %g5, %g4, %g0
be,pt %xcc, 1f
nop
rd %fprs, %g5
andcc %g5, FPRS_FEF, %g0
be,pt %xcc, 1f
nop
/* Legal state when DCR_IFPOE is set in Cheetah %dcr. */
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
add %g0, %g0, %g0
ba,a,pt %xcc, rtrap_clr_l6
1: ldub [%g6 + TI_FPSAVED], %g5 ! Load Group
wr %g0, FPRS_FEF, %fprs ! LSU Group+4bubbles
andcc %g5, FPRS_FEF, %g0 ! IEU1 Group
be,a,pt %icc, 1f ! CTI
clr %g7 ! IEU0
ldx [%g6 + TI_GSR], %g7 ! Load Group
1: andcc %g5, FPRS_DL, %g0 ! IEU1
bne,pn %icc, 2f ! CTI
fzero %f0 ! FPA
andcc %g5, FPRS_DU, %g0 ! IEU1 Group
bne,pn %icc, 1f ! CTI
fzero %f2 ! FPA
faddd %f0, %f2, %f4
fmuld %f0, %f2, %f6
faddd %f0, %f2, %f8
fmuld %f0, %f2, %f10
faddd %f0, %f2, %f12
fmuld %f0, %f2, %f14
faddd %f0, %f2, %f16
fmuld %f0, %f2, %f18
faddd %f0, %f2, %f20
fmuld %f0, %f2, %f22
faddd %f0, %f2, %f24
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
faddd %f0, %f2, %f32
fmuld %f0, %f2, %f34
faddd %f0, %f2, %f36
fmuld %f0, %f2, %f38
faddd %f0, %f2, %f40
fmuld %f0, %f2, %f42
faddd %f0, %f2, %f44
fmuld %f0, %f2, %f46
faddd %f0, %f2, %f48
fmuld %f0, %f2, %f50
faddd %f0, %f2, %f52
fmuld %f0, %f2, %f54
faddd %f0, %f2, %f56
fmuld %f0, %f2, %f58
b,pt %xcc, fpdis_exit2
faddd %f0, %f2, %f60
1: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS + 0x80, %g1
faddd %f0, %f2, %f4
fmuld %f0, %f2, %f6
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_1:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0xc0, %g2
faddd %f0, %f2, %f8
fmuld %f0, %f2, %f10
ldda [%g1] ASI_BLK_S, %f32 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g2] ASI_BLK_S, %f48
faddd %f0, %f2, %f12
fmuld %f0, %f2, %f14
faddd %f0, %f2, %f16
fmuld %f0, %f2, %f18
faddd %f0, %f2, %f20
fmuld %f0, %f2, %f22
faddd %f0, %f2, %f24
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
b,pt %xcc, fpdis_exit
membar #Sync
2: andcc %g5, FPRS_DU, %g0
bne,pt %icc, 3f
fzero %f32
mov SECONDARY_CONTEXT, %g3
fzero %f34
ldxa [%g3] ASI_DMMU, %g5
add %g6, TI_FPREGS, %g1
cplus_fptrap_insn_2:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0x40, %g2
faddd %f32, %f34, %f36
fmuld %f32, %f34, %f38
ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g2] ASI_BLK_S, %f16
faddd %f32, %f34, %f40
fmuld %f32, %f34, %f42
faddd %f32, %f34, %f44
fmuld %f32, %f34, %f46
faddd %f32, %f34, %f48
fmuld %f32, %f34, %f50
faddd %f32, %f34, %f52
fmuld %f32, %f34, %f54
faddd %f32, %f34, %f56
fmuld %f32, %f34, %f58
faddd %f32, %f34, %f60
fmuld %f32, %f34, %f62
ba,pt %xcc, fpdis_exit
membar #Sync
3: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS, %g1
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_3:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
mov 0x40, %g2
ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-(
ldda [%g1 + %g2] ASI_BLK_S, %f16
add %g1, 0x80, %g1
ldda [%g1] ASI_BLK_S, %f32
ldda [%g1 + %g2] ASI_BLK_S, %f48
membar #Sync
fpdis_exit:
stxa %g5, [%g3] ASI_DMMU
membar #Sync
fpdis_exit2:
wr %g7, 0, %gsr
ldx [%g6 + TI_XFSR], %fsr
rdpr %tstate, %g3
or %g3, %g4, %g3 ! anal...
wrpr %g3, %tstate
wr %g0, FPRS_FEF, %fprs ! clean DU/DL bits
retry
.align 32
fp_other_bounce:
call do_fpother
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_fpother_check_fitos
.align 32
do_fpother_check_fitos:
sethi %hi(fp_other_bounce - 4), %g7
or %g7, %lo(fp_other_bounce - 4), %g7
/* NOTE: Need to preserve %g7 until we fully commit
* to the fitos fixup.
*/
stx %fsr, [%g6 + TI_XFSR]
rdpr %tstate, %g3
andcc %g3, TSTATE_PRIV, %g0
bne,pn %xcc, do_fptrap_after_fsr
nop
ldx [%g6 + TI_XFSR], %g3
srlx %g3, 14, %g1
and %g1, 7, %g1
cmp %g1, 2 ! Unfinished FP-OP
bne,pn %xcc, do_fptrap_after_fsr
sethi %hi(1 << 23), %g1 ! Inexact
andcc %g3, %g1, %g0
bne,pn %xcc, do_fptrap_after_fsr
rdpr %tpc, %g1
lduwa [%g1] ASI_AIUP, %g3 ! This cannot ever fail
#define FITOS_MASK 0xc1f83fe0
#define FITOS_COMPARE 0x81a01880
sethi %hi(FITOS_MASK), %g1
or %g1, %lo(FITOS_MASK), %g1
and %g3, %g1, %g1
sethi %hi(FITOS_COMPARE), %g2
or %g2, %lo(FITOS_COMPARE), %g2
cmp %g1, %g2
bne,pn %xcc, do_fptrap_after_fsr
nop
std %f62, [%g6 + TI_FPREGS + (62 * 4)]
sethi %hi(fitos_table_1), %g1
and %g3, 0x1f, %g2
or %g1, %lo(fitos_table_1), %g1
sllx %g2, 2, %g2
jmpl %g1 + %g2, %g0
ba,pt %xcc, fitos_emul_continue
fitos_table_1:
fitod %f0, %f62
fitod %f1, %f62
fitod %f2, %f62
fitod %f3, %f62
fitod %f4, %f62
fitod %f5, %f62
fitod %f6, %f62
fitod %f7, %f62
fitod %f8, %f62
fitod %f9, %f62
fitod %f10, %f62
fitod %f11, %f62
fitod %f12, %f62
fitod %f13, %f62
fitod %f14, %f62
fitod %f15, %f62
fitod %f16, %f62
fitod %f17, %f62
fitod %f18, %f62
fitod %f19, %f62
fitod %f20, %f62
fitod %f21, %f62
fitod %f22, %f62
fitod %f23, %f62
fitod %f24, %f62
fitod %f25, %f62
fitod %f26, %f62
fitod %f27, %f62
fitod %f28, %f62
fitod %f29, %f62
fitod %f30, %f62
fitod %f31, %f62
fitos_emul_continue:
sethi %hi(fitos_table_2), %g1
srl %g3, 25, %g2
or %g1, %lo(fitos_table_2), %g1
and %g2, 0x1f, %g2
sllx %g2, 2, %g2
jmpl %g1 + %g2, %g0
ba,pt %xcc, fitos_emul_fini
fitos_table_2:
fdtos %f62, %f0
fdtos %f62, %f1
fdtos %f62, %f2
fdtos %f62, %f3
fdtos %f62, %f4
fdtos %f62, %f5
fdtos %f62, %f6
fdtos %f62, %f7
fdtos %f62, %f8
fdtos %f62, %f9
fdtos %f62, %f10
fdtos %f62, %f11
fdtos %f62, %f12
fdtos %f62, %f13
fdtos %f62, %f14
fdtos %f62, %f15
fdtos %f62, %f16
fdtos %f62, %f17
fdtos %f62, %f18
fdtos %f62, %f19
fdtos %f62, %f20
fdtos %f62, %f21
fdtos %f62, %f22
fdtos %f62, %f23
fdtos %f62, %f24
fdtos %f62, %f25
fdtos %f62, %f26
fdtos %f62, %f27
fdtos %f62, %f28
fdtos %f62, %f29
fdtos %f62, %f30
fdtos %f62, %f31
fitos_emul_fini:
ldd [%g6 + TI_FPREGS + (62 * 4)], %f62
done
.globl do_fptrap
.align 32
do_fptrap:
stx %fsr, [%g6 + TI_XFSR]
do_fptrap_after_fsr:
ldub [%g6 + TI_FPSAVED], %g3
rd %fprs, %g1
or %g3, %g1, %g3
stb %g3, [%g6 + TI_FPSAVED]
rd %gsr, %g3
stx %g3, [%g6 + TI_GSR]
mov SECONDARY_CONTEXT, %g3
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_4:
sethi %hi(0), %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS, %g2
andcc %g1, FPRS_DL, %g0
be,pn %icc, 4f
mov 0x40, %g3
stda %f0, [%g2] ASI_BLK_S
stda %f16, [%g2 + %g3] ASI_BLK_S
andcc %g1, FPRS_DU, %g0
be,pn %icc, 5f
4: add %g2, 128, %g2
stda %f32, [%g2] ASI_BLK_S
stda %f48, [%g2 + %g3] ASI_BLK_S
5: mov SECONDARY_CONTEXT, %g1
membar #Sync
stxa %g5, [%g1] ASI_DMMU
membar #Sync
ba,pt %xcc, etrap
wr %g0, 0, %fprs
cplus_fptrap_1:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.globl cheetah_plus_patch_fpdis
cheetah_plus_patch_fpdis:
/* We configure the dTLB512_0 for 4MB pages and the
* dTLB512_1 for 8K pages when in context zero.
*/
sethi %hi(cplus_fptrap_1), %o0
lduw [%o0 + %lo(cplus_fptrap_1)], %o1
set cplus_fptrap_insn_1, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_2, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_3, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_4, %o2
stw %o1, [%o2]
flush %o2
retl
nop
/* The registers for cross calls will be:
*
* DATA 0: [low 32-bits] Address of function to call, jmp to this
* [high 32-bits] MMU Context Argument 0, place in %g5
* DATA 1: Address Argument 1, place in %g6
* DATA 2: Address Argument 2, place in %g7
*
* With this method we can do most of the cross-call tlb/cache
* flushing very quickly.
*
* Current CPU's IRQ worklist table is locked into %g1,
* don't touch.
*/
.text
.align 32
.globl do_ivec
do_ivec:
mov 0x40, %g3
ldxa [%g3 + %g0] ASI_INTR_R, %g3
sethi %hi(KERNBASE), %g4
cmp %g3, %g4
bgeu,pn %xcc, do_ivec_xcall
srlx %g3, 32, %g5
stxa %g0, [%g0] ASI_INTR_RECEIVE
membar #Sync
sethi %hi(ivector_table), %g2
sllx %g3, 5, %g3
or %g2, %lo(ivector_table), %g2
add %g2, %g3, %g3
ldx [%g3 + 0x08], %g2 /* irq_info */
ldub [%g3 + 0x04], %g4 /* pil */
brz,pn %g2, do_ivec_spurious
mov 1, %g2
sllx %g2, %g4, %g2
sllx %g4, 2, %g4
lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */
stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */
stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */
wr %g2, 0x0, %set_softint
retry
do_ivec_xcall:
mov 0x50, %g1
ldxa [%g1 + %g0] ASI_INTR_R, %g1
srl %g3, 0, %g3
mov 0x60, %g7
ldxa [%g7 + %g0] ASI_INTR_R, %g7
stxa %g0, [%g0] ASI_INTR_RECEIVE
membar #Sync
ba,pt %xcc, 1f
nop
.align 32
1: jmpl %g3, %g0
nop
do_ivec_spurious:
stw %g3, [%g6 + 0x00] /* irq_work(cpu, 0) = bucket */
rdpr %pstate, %g5
wrpr %g5, PSTATE_IG | PSTATE_AG, %pstate
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
call catch_disabled_ivec
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl save_alternate_globals
save_alternate_globals: /* %o0 = save_area */
rdpr %pstate, %o5
andn %o5, PSTATE_IE, %o1
wrpr %o1, PSTATE_AG, %pstate
stx %g0, [%o0 + 0x00]
stx %g1, [%o0 + 0x08]
stx %g2, [%o0 + 0x10]
stx %g3, [%o0 + 0x18]
stx %g4, [%o0 + 0x20]
stx %g5, [%o0 + 0x28]
stx %g6, [%o0 + 0x30]
stx %g7, [%o0 + 0x38]
wrpr %o1, PSTATE_IG, %pstate
stx %g0, [%o0 + 0x40]
stx %g1, [%o0 + 0x48]
stx %g2, [%o0 + 0x50]
stx %g3, [%o0 + 0x58]
stx %g4, [%o0 + 0x60]
stx %g5, [%o0 + 0x68]
stx %g6, [%o0 + 0x70]
stx %g7, [%o0 + 0x78]
wrpr %o1, PSTATE_MG, %pstate
stx %g0, [%o0 + 0x80]
stx %g1, [%o0 + 0x88]
stx %g2, [%o0 + 0x90]
stx %g3, [%o0 + 0x98]
stx %g4, [%o0 + 0xa0]
stx %g5, [%o0 + 0xa8]
stx %g6, [%o0 + 0xb0]
stx %g7, [%o0 + 0xb8]
wrpr %o5, 0x0, %pstate
retl
nop
.globl restore_alternate_globals
restore_alternate_globals: /* %o0 = save_area */
rdpr %pstate, %o5
andn %o5, PSTATE_IE, %o1
wrpr %o1, PSTATE_AG, %pstate
ldx [%o0 + 0x00], %g0
ldx [%o0 + 0x08], %g1
ldx [%o0 + 0x10], %g2
ldx [%o0 + 0x18], %g3
ldx [%o0 + 0x20], %g4
ldx [%o0 + 0x28], %g5
ldx [%o0 + 0x30], %g6
ldx [%o0 + 0x38], %g7
wrpr %o1, PSTATE_IG, %pstate
ldx [%o0 + 0x40], %g0
ldx [%o0 + 0x48], %g1
ldx [%o0 + 0x50], %g2
ldx [%o0 + 0x58], %g3
ldx [%o0 + 0x60], %g4
ldx [%o0 + 0x68], %g5
ldx [%o0 + 0x70], %g6
ldx [%o0 + 0x78], %g7
wrpr %o1, PSTATE_MG, %pstate
ldx [%o0 + 0x80], %g0
ldx [%o0 + 0x88], %g1
ldx [%o0 + 0x90], %g2
ldx [%o0 + 0x98], %g3
ldx [%o0 + 0xa0], %g4
ldx [%o0 + 0xa8], %g5
ldx [%o0 + 0xb0], %g6
ldx [%o0 + 0xb8], %g7
wrpr %o5, 0x0, %pstate
retl
nop
.globl getcc, setcc
getcc:
ldx [%o0 + PT_V9_TSTATE], %o1
srlx %o1, 32, %o1
and %o1, 0xf, %o1
retl
stx %o1, [%o0 + PT_V9_G1]
setcc:
ldx [%o0 + PT_V9_TSTATE], %o1
ldx [%o0 + PT_V9_G1], %o2
or %g0, %ulo(TSTATE_ICC), %o3
sllx %o3, 32, %o3
andn %o1, %o3, %o1
sllx %o2, 32, %o2
and %o2, %o3, %o2
or %o1, %o2, %o1
retl
stx %o1, [%o0 + PT_V9_TSTATE]
.globl utrap, utrap_ill
utrap: brz,pn %g1, etrap
nop
save %sp, -128, %sp
rdpr %tstate, %l6
rdpr %cwp, %l7
andn %l6, TSTATE_CWP, %l6
wrpr %l6, %l7, %tstate
rdpr %tpc, %l6
rdpr %tnpc, %l7
wrpr %g1, 0, %tnpc
done
utrap_ill:
call bad_trap
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
#ifdef CONFIG_BLK_DEV_FD
.globl floppy_hardint
floppy_hardint:
wr %g0, (1 << 11), %clear_softint
sethi %hi(doing_pdma), %g1
ld [%g1 + %lo(doing_pdma)], %g2
brz,pn %g2, floppy_dosoftint
sethi %hi(fdc_status), %g3
ldx [%g3 + %lo(fdc_status)], %g3
sethi %hi(pdma_vaddr), %g5
ldx [%g5 + %lo(pdma_vaddr)], %g4
sethi %hi(pdma_size), %g5
ldx [%g5 + %lo(pdma_size)], %g5
next_byte:
lduba [%g3] ASI_PHYS_BYPASS_EC_E, %g7
andcc %g7, 0x80, %g0
be,pn %icc, floppy_fifo_emptied
andcc %g7, 0x20, %g0
be,pn %icc, floppy_overrun
andcc %g7, 0x40, %g0
be,pn %icc, floppy_write
sub %g5, 1, %g5
inc %g3
lduba [%g3] ASI_PHYS_BYPASS_EC_E, %g7
dec %g3
orcc %g0, %g5, %g0
stb %g7, [%g4]
bne,pn %xcc, next_byte
add %g4, 1, %g4
b,pt %xcc, floppy_tdone
nop
floppy_write:
ldub [%g4], %g7
orcc %g0, %g5, %g0
inc %g3
stba %g7, [%g3] ASI_PHYS_BYPASS_EC_E
dec %g3
bne,pn %xcc, next_byte
add %g4, 1, %g4
floppy_tdone:
sethi %hi(pdma_vaddr), %g1
stx %g4, [%g1 + %lo(pdma_vaddr)]
sethi %hi(pdma_size), %g1
stx %g5, [%g1 + %lo(pdma_size)]
sethi %hi(auxio_register), %g1
ldx [%g1 + %lo(auxio_register)], %g7
lduba [%g7] ASI_PHYS_BYPASS_EC_E, %g5
or %g5, AUXIO_AUX1_FTCNT, %g5
/* andn %g5, AUXIO_AUX1_MASK, %g5 */
stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E
andn %g5, AUXIO_AUX1_FTCNT, %g5
/* andn %g5, AUXIO_AUX1_MASK, %g5 */
nop; nop; nop; nop; nop; nop;
nop; nop; nop; nop; nop; nop;
stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E
sethi %hi(doing_pdma), %g1
b,pt %xcc, floppy_dosoftint
st %g0, [%g1 + %lo(doing_pdma)]
floppy_fifo_emptied:
sethi %hi(pdma_vaddr), %g1
stx %g4, [%g1 + %lo(pdma_vaddr)]
sethi %hi(pdma_size), %g1
stx %g5, [%g1 + %lo(pdma_size)]
sethi %hi(irq_action), %g1
or %g1, %lo(irq_action), %g1
ldx [%g1 + (11 << 3)], %g3 ! irqaction[floppy_irq]
ldx [%g3 + 0x08], %g4 ! action->flags>>48==ino
sethi %hi(ivector_table), %g3
srlx %g4, 48, %g4
or %g3, %lo(ivector_table), %g3
sllx %g4, 5, %g4
ldx [%g3 + %g4], %g4 ! &ivector_table[ino]
ldx [%g4 + 0x10], %g4 ! bucket->iclr
stwa %g0, [%g4] ASI_PHYS_BYPASS_EC_E ! ICLR_IDLE
membar #Sync ! probably not needed...
retry
floppy_overrun:
sethi %hi(pdma_vaddr), %g1
stx %g4, [%g1 + %lo(pdma_vaddr)]
sethi %hi(pdma_size), %g1
stx %g5, [%g1 + %lo(pdma_size)]
sethi %hi(doing_pdma), %g1
st %g0, [%g1 + %lo(doing_pdma)]
floppy_dosoftint:
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
mov 11, %o0
mov 0, %o1
call sparc_floppy_irq
add %sp, PTREGS_OFF, %o2
b,pt %xcc, rtrap_irq
nop
#endif /* CONFIG_BLK_DEV_FD */
/* XXX Here is stuff we still need to write... -DaveM XXX */
.globl netbsd_syscall
netbsd_syscall:
retl
nop
/* These next few routines must be sure to clear the
* SFSR FaultValid bit so that the fast tlb data protection
* handler does not flush the wrong context and lock up the
* box.
*/
.globl __do_data_access_exception
.globl __do_data_access_exception_tl1
__do_data_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
ba,pt %xcc, winfix_dax
rdpr %tpc, %g3
__do_data_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl __do_instruction_access_exception
.globl __do_instruction_access_exception_tl1
__do_instruction_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etraptl1
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call instruction_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
__do_instruction_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call instruction_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* This is the trap handler entry point for ECC correctable
* errors. They are corrected, but we listen for the trap
* so that the event can be logged.
*
* Disrupting errors are either:
* 1) single-bit ECC errors during UDB reads to system
* memory
* 2) data parity errors during write-back events
*
* As far as I can make out from the manual, the CEE trap
* is only for correctable errors during memory read
* accesses by the front-end of the processor.
*
* The code below is only for trap level 1 CEE events,
* as it is the only situation where we can safely record
* and log. For trap level >1 we just clear the CE bit
* in the AFSR and return.
*/
/* Our trap handling infrastructure allows us to preserve
* two 64-bit values during etrap for arguments to
* subsequent C code. Therefore we encode the information
* as follows:
*
* value 1) Full 64-bits of AFAR
* value 2) Low 33-bits of AFSR, then bits 33-->42
* are UDBL error status and bits 43-->52
* are UDBH error status
*/
.align 64
.globl cee_trap
cee_trap:
ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR
ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR
sllx %g1, 31, %g1 ! Clear reserved bits
srlx %g1, 31, %g1 ! in AFSR
/* NOTE: UltraSparc-I/II have high and low UDB error
* registers, corresponding to the two UDB units
* present on those chips. UltraSparc-IIi only
* has a single UDB, called "SDB" in the manual.
* For IIi the upper UDB register always reads
* as zero so for our purposes things will just
* work with the checks below.
*/
ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-Low error status
sllx %g3, (33 + 0), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
nop
stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL
membar #Sync ! Synchronize ASI stores
1: mov 0x18, %g5 ! Addr of UDB-High error status
ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-High error status
sllx %g3, (33 + 10), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
nop
nop
stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH
membar #Sync ! Synchronize ASI stores
1: mov 1, %g5 ! AFSR CE bit is
sllx %g5, 20, %g5 ! bit 20
stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR
membar #Sync ! Synchronize ASI stores
sllx %g2, (64 - 41), %g2 ! Clear reserved bits
srlx %g2, (64 - 41), %g2 ! in latched AFAR
andn %g2, 0x0f, %g2 ! Finish resv bit clearing
mov %g1, %g4 ! Move AFSR+UDB* into save reg
mov %g2, %g5 ! Move AFAR into save reg
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o0
mov %l5, %o1
call cee_log
add %sp, PTREGS_OFF, %o2
ba,a,pt %xcc, rtrap_irq
/* Capture I/D/E-cache state into per-cpu error scoreboard.
*
* %g1: (TL>=0) ? 1 : 0
* %g2: scratch
* %g3: scratch
* %g4: AFSR
* %g5: AFAR
* %g6: current thread ptr
* %g7: scratch
*/
#define CHEETAH_LOG_ERROR \
/* Put "TL1" software bit into AFSR. */ \
and %g1, 0x1, %g1; \
sllx %g1, 63, %g2; \
or %g4, %g2, %g4; \
/* Get log entry pointer for this cpu at this trap level. */ \
BRANCH_IF_JALAPENO(g2,g3,50f) \
ldxa [%g0] ASI_SAFARI_CONFIG, %g2; \
srlx %g2, 17, %g2; \
ba,pt %xcc, 60f; \
and %g2, 0x3ff, %g2; \
50: ldxa [%g0] ASI_JBUS_CONFIG, %g2; \
srlx %g2, 17, %g2; \
and %g2, 0x1f, %g2; \
60: sllx %g2, 9, %g2; \
sethi %hi(cheetah_error_log), %g3; \
ldx [%g3 + %lo(cheetah_error_log)], %g3; \
brz,pn %g3, 80f; \
nop; \
add %g3, %g2, %g3; \
sllx %g1, 8, %g1; \
add %g3, %g1, %g1; \
/* %g1 holds pointer to the top of the logging scoreboard */ \
ldx [%g1 + 0x0], %g7; \
cmp %g7, -1; \
bne,pn %xcc, 80f; \
nop; \
stx %g4, [%g1 + 0x0]; \
stx %g5, [%g1 + 0x8]; \
add %g1, 0x10, %g1; \
/* %g1 now points to D-cache logging area */ \
set 0x3ff8, %g2; /* DC_addr mask */ \
and %g5, %g2, %g2; /* DC_addr bits of AFAR */ \
srlx %g5, 12, %g3; \
or %g3, 1, %g3; /* PHYS tag + valid */ \
10: ldxa [%g2] ASI_DCACHE_TAG, %g7; \
cmp %g3, %g7; /* TAG match? */ \
bne,pt %xcc, 13f; \
nop; \
/* Yep, what we want, capture state. */ \
stx %g2, [%g1 + 0x20]; \
stx %g7, [%g1 + 0x28]; \
/* A membar Sync is required before and after utag access. */ \
membar #Sync; \
ldxa [%g2] ASI_DCACHE_UTAG, %g7; \
membar #Sync; \
stx %g7, [%g1 + 0x30]; \
ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7; \
stx %g7, [%g1 + 0x38]; \
clr %g3; \
12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7; \
stx %g7, [%g1]; \
add %g3, (1 << 5), %g3; \
cmp %g3, (4 << 5); \
bl,pt %xcc, 12b; \
add %g1, 0x8, %g1; \
ba,pt %xcc, 20f; \
add %g1, 0x20, %g1; \
13: sethi %hi(1 << 14), %g7; \
add %g2, %g7, %g2; \
srlx %g2, 14, %g7; \
cmp %g7, 4; \
bl,pt %xcc, 10b; \
nop; \
add %g1, 0x40, %g1; \
20: /* %g1 now points to I-cache logging area */ \
set 0x1fe0, %g2; /* IC_addr mask */ \
and %g5, %g2, %g2; /* IC_addr bits of AFAR */ \
sllx %g2, 1, %g2; /* IC_addr[13:6]==VA[12:5] */ \
srlx %g5, (13 - 8), %g3; /* Make PTAG */ \
andn %g3, 0xff, %g3; /* Mask off undefined bits */ \
21: ldxa [%g2] ASI_IC_TAG, %g7; \
andn %g7, 0xff, %g7; \
cmp %g3, %g7; \
bne,pt %xcc, 23f; \
nop; \
/* Yep, what we want, capture state. */ \
stx %g2, [%g1 + 0x40]; \
stx %g7, [%g1 + 0x48]; \
add %g2, (1 << 3), %g2; \
ldxa [%g2] ASI_IC_TAG, %g7; \
add %g2, (1 << 3), %g2; \
stx %g7, [%g1 + 0x50]; \
ldxa [%g2] ASI_IC_TAG, %g7; \
add %g2, (1 << 3), %g2; \
stx %g7, [%g1 + 0x60]; \
ldxa [%g2] ASI_IC_TAG, %g7; \
stx %g7, [%g1 + 0x68]; \
sub %g2, (3 << 3), %g2; \
ldxa [%g2] ASI_IC_STAG, %g7; \
stx %g7, [%g1 + 0x58]; \
clr %g3; \
srlx %g2, 2, %g2; \
22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7; \
stx %g7, [%g1]; \
add %g3, (1 << 3), %g3; \
cmp %g3, (8 << 3); \
bl,pt %xcc, 22b; \
add %g1, 0x8, %g1; \
ba,pt %xcc, 30f; \
add %g1, 0x30, %g1; \
23: sethi %hi(1 << 14), %g7; \
add %g2, %g7, %g2; \
srlx %g2, 14, %g7; \
cmp %g7, 4; \
bl,pt %xcc, 21b; \
nop; \
add %g1, 0x70, %g1; \
30: /* %g1 now points to E-cache logging area */ \
andn %g5, (32 - 1), %g2; /* E-cache subblock */ \
stx %g2, [%g1 + 0x20]; \
ldxa [%g2] ASI_EC_TAG_DATA, %g7; \
stx %g7, [%g1 + 0x28]; \
ldxa [%g2] ASI_EC_R, %g0; \
clr %g3; \
31: ldxa [%g3] ASI_EC_DATA, %g7; \
stx %g7, [%g1 + %g3]; \
add %g3, 0x8, %g3; \
cmp %g3, 0x20; \
bl,pt %xcc, 31b; \
nop; \
80: /* DONE */
/* These get patched into the trap table at boot time
* once we know we have a cheetah processor.
*/
.globl cheetah_fecc_trap_vector, cheetah_fecc_trap_vector_tl1
cheetah_fecc_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_DC | DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_fast_ecc), %g2
jmpl %g2 + %lo(cheetah_fast_ecc), %g0
mov 0, %g1
cheetah_fecc_trap_vector_tl1:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_DC | DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_fast_ecc), %g2
jmpl %g2 + %lo(cheetah_fast_ecc), %g0
mov 1, %g1
.globl cheetah_cee_trap_vector, cheetah_cee_trap_vector_tl1
cheetah_cee_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_cee), %g2
jmpl %g2 + %lo(cheetah_cee), %g0
mov 0, %g1
cheetah_cee_trap_vector_tl1:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
andn %g1, DCU_IC, %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
sethi %hi(cheetah_cee), %g2
jmpl %g2 + %lo(cheetah_cee), %g0
mov 1, %g1
.globl cheetah_deferred_trap_vector, cheetah_deferred_trap_vector_tl1
cheetah_deferred_trap_vector:
membar #Sync
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1;
andn %g1, DCU_DC | DCU_IC, %g1;
stxa %g1, [%g0] ASI_DCU_CONTROL_REG;
membar #Sync;
sethi %hi(cheetah_deferred_trap), %g2
jmpl %g2 + %lo(cheetah_deferred_trap), %g0
mov 0, %g1
cheetah_deferred_trap_vector_tl1:
membar #Sync;
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1;
andn %g1, DCU_DC | DCU_IC, %g1;
stxa %g1, [%g0] ASI_DCU_CONTROL_REG;
membar #Sync;
sethi %hi(cheetah_deferred_trap), %g2
jmpl %g2 + %lo(cheetah_deferred_trap), %g0
mov 1, %g1
/* Cheetah+ specific traps. These are for the new I/D cache parity
* error traps. The first argument to cheetah_plus_parity_handler
* is encoded as follows:
*
* Bit0: 0=dcache,1=icache
* Bit1: 0=recoverable,1=unrecoverable
*/
.globl cheetah_plus_dcpe_trap_vector, cheetah_plus_dcpe_trap_vector_tl1
cheetah_plus_dcpe_trap_vector:
membar #Sync
sethi %hi(do_cheetah_plus_data_parity), %g7
jmpl %g7 + %lo(do_cheetah_plus_data_parity), %g0
nop
nop
nop
nop
nop
do_cheetah_plus_data_parity:
ba,pt %xcc, etrap
rd %pc, %g7
mov 0x0, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
cheetah_plus_dcpe_trap_vector_tl1:
membar #Sync
wrpr PSTATE_IG | PSTATE_PEF | PSTATE_PRIV, %pstate
sethi %hi(do_dcpe_tl1), %g3
jmpl %g3 + %lo(do_dcpe_tl1), %g0
nop
nop
nop
nop
.globl cheetah_plus_icpe_trap_vector, cheetah_plus_icpe_trap_vector_tl1
cheetah_plus_icpe_trap_vector:
membar #Sync
sethi %hi(do_cheetah_plus_insn_parity), %g7
jmpl %g7 + %lo(do_cheetah_plus_insn_parity), %g0
nop
nop
nop
nop
nop
do_cheetah_plus_insn_parity:
ba,pt %xcc, etrap
rd %pc, %g7
mov 0x1, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
cheetah_plus_icpe_trap_vector_tl1:
membar #Sync
wrpr PSTATE_IG | PSTATE_PEF | PSTATE_PRIV, %pstate
sethi %hi(do_icpe_tl1), %g3
jmpl %g3 + %lo(do_icpe_tl1), %g0
nop
nop
nop
nop
/* If we take one of these traps when tl >= 1, then we
* jump to interrupt globals. If some trap level above us
* was also using interrupt globals, we cannot recover.
* We may use all interrupt global registers except %g6.
*/
.globl do_dcpe_tl1, do_icpe_tl1
do_dcpe_tl1:
rdpr %tl, %g1 ! Save original trap level
mov 1, %g2 ! Setup TSTATE checking loop
sethi %hi(TSTATE_IG), %g3 ! TSTATE mask bit
1: wrpr %g2, %tl ! Set trap level to check
rdpr %tstate, %g4 ! Read TSTATE for this level
andcc %g4, %g3, %g0 ! Interrupt globals in use?
bne,a,pn %xcc, do_dcpe_tl1_fatal ! Yep, irrecoverable
wrpr %g1, %tl ! Restore original trap level
add %g2, 1, %g2 ! Next trap level
cmp %g2, %g1 ! Hit them all yet?
ble,pt %icc, 1b ! Not yet
nop
wrpr %g1, %tl ! Restore original trap level
do_dcpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
/* Reset D-cache parity */
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
sub %g1, %g2, %g1 ! Move down 1 cacheline
1: srl %g1, 14, %g3 ! Compute UTAG
membar #Sync
stxa %g3, [%g1] ASI_DCACHE_UTAG
membar #Sync
sub %g2, 8, %g3 ! 64-bit data word within line
2: membar #Sync
stxa %g0, [%g1 + %g3] ASI_DCACHE_DATA
membar #Sync
subcc %g3, 8, %g3 ! Next 64-bit data word
bge,pt %icc, 2b
nop
subcc %g1, %g2, %g1 ! Next cacheline
bge,pt %icc, 1b
nop
ba,pt %xcc, dcpe_icpe_tl1_common
nop
do_dcpe_tl1_fatal:
sethi %hi(1f), %g7
ba,pt %xcc, etraptl1
1: or %g7, %lo(1b), %g7
mov 0x2, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
do_icpe_tl1:
rdpr %tl, %g1 ! Save original trap level
mov 1, %g2 ! Setup TSTATE checking loop
sethi %hi(TSTATE_IG), %g3 ! TSTATE mask bit
1: wrpr %g2, %tl ! Set trap level to check
rdpr %tstate, %g4 ! Read TSTATE for this level
andcc %g4, %g3, %g0 ! Interrupt globals in use?
bne,a,pn %xcc, do_icpe_tl1_fatal ! Yep, irrecoverable
wrpr %g1, %tl ! Restore original trap level
add %g2, 1, %g2 ! Next trap level
cmp %g2, %g1 ! Hit them all yet?
ble,pt %icc, 1b ! Not yet
nop
wrpr %g1, %tl ! Restore original trap level
do_icpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
/* Flush I-cache */
sethi %hi(1 << 15), %g1 ! I-cache size
mov (1 << 5), %g2 ! I-cache line size
sub %g1, %g2, %g1
1: or %g1, (2 << 3), %g3
stxa %g0, [%g3] ASI_IC_TAG
membar #Sync
subcc %g1, %g2, %g1
bge,pt %icc, 1b
nop
ba,pt %xcc, dcpe_icpe_tl1_common
nop
do_icpe_tl1_fatal:
sethi %hi(1f), %g7
ba,pt %xcc, etraptl1
1: or %g7, %lo(1b), %g7
mov 0x3, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
ba,pt %xcc, rtrap
clr %l6
dcpe_icpe_tl1_common:
/* Flush D-cache, re-enable D/I caches in DCU and finally
* retry the trapping instruction.
*/
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
sub %g1, %g2, %g1
1: stxa %g0, [%g1] ASI_DCACHE_TAG
membar #Sync
subcc %g1, %g2, %g1
bge,pt %icc, 1b
nop
ldxa [%g0] ASI_DCU_CONTROL_REG, %g1
or %g1, (DCU_DC | DCU_IC), %g1
stxa %g1, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
retry
/* Cheetah FECC trap handling, we get here from tl{0,1}_fecc
* in the trap table. That code has done a memory barrier
* and has disabled both the I-cache and D-cache in the DCU
* control register. The I-cache is disabled so that we may
* capture the corrupted cache line, and the D-cache is disabled
* because corrupt data may have been placed there and we don't
* want to reference it.
*
* %g1 is one if this trap occurred at %tl >= 1.
*
* Next, we turn off error reporting so that we don't recurse.
*/
.globl cheetah_fast_ecc
cheetah_fast_ecc:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_NCEEN | ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_fecc_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
/* Our caller has disabled I-cache and performed membar Sync. */
.globl cheetah_cee
cheetah_cee:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_cee_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
/* Our caller has disabled I-cache+D-cache and performed membar Sync. */
.globl cheetah_deferred_trap
cheetah_deferred_trap:
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g2
andn %g2, ESTATE_ERROR_NCEEN | ESTATE_ERROR_CEEN, %g2
stxa %g2, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
/* Fetch and clear AFSR/AFAR */
ldxa [%g0] ASI_AFSR, %g4
ldxa [%g0] ASI_AFAR, %g5
stxa %g4, [%g0] ASI_AFSR
membar #Sync
CHEETAH_LOG_ERROR
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o1
mov %l5, %o2
call cheetah_deferred_handler
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_irq
.globl __do_privact
__do_privact:
mov TLB_SFSR, %g3
stxa %g0, [%g3] ASI_DMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
call do_privact
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_mna
do_mna:
rdpr %tl, %g3
cmp %g3, 1
/* Setup %g4/%g5 now as they are used in the
* winfixup code.
*/
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ldxa [%g3] ASI_DMMU, %g5
stxa %g0, [%g3] ASI_DMMU ! Clear FaultValid bit
membar #Sync
bgu,pn %icc, winfix_mna
rdpr %tpc, %g3
1: sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_lddfmna
do_lddfmna:
sethi %hi(109f), %g7
mov TLB_SFSR, %g4
ldxa [%g4] ASI_DMMU, %g5
stxa %g0, [%g4] ASI_DMMU ! Clear FaultValid bit
membar #Sync
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call handle_lddfmna
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl do_stdfmna
do_stdfmna:
sethi %hi(109f), %g7
mov TLB_SFSR, %g4
ldxa [%g4] ASI_DMMU, %g5
stxa %g0, [%g4] ASI_DMMU ! Clear FaultValid bit
membar #Sync
mov DMMU_SFAR, %g4
ldxa [%g4] ASI_DMMU, %g4
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call handle_stdfmna
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl breakpoint_trap
breakpoint_trap:
call sparc_breakpoint
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
/* SunOS uses syscall zero as the 'indirect syscall' it looks
* like indir_syscall(scall_num, arg0, arg1, arg2...); etc.
* This is complete brain damage.
*/
.globl sunos_indir
sunos_indir:
srl %o0, 0, %o0
mov %o7, %l4
cmp %o0, NR_SYSCALLS
blu,a,pt %icc, 1f
sll %o0, 0x2, %o0
sethi %hi(sunos_nosys), %l6
b,pt %xcc, 2f
or %l6, %lo(sunos_nosys), %l6
1: sethi %hi(sunos_sys_table), %l7
or %l7, %lo(sunos_sys_table), %l7
lduw [%l7 + %o0], %l6
2: mov %o1, %o0
mov %o2, %o1
mov %o3, %o2
mov %o4, %o3
mov %o5, %o4
call %l6
mov %l4, %o7
.globl sunos_getpid
sunos_getpid:
call sys_getppid
nop
call sys_getpid
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
/* SunOS getuid() returns uid in %o0 and euid in %o1 */
.globl sunos_getuid
sunos_getuid:
call sys32_geteuid16
nop
call sys32_getuid16
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
/* SunOS getgid() returns gid in %o0 and egid in %o1 */
.globl sunos_getgid
sunos_getgid:
call sys32_getegid16
nop
call sys32_getgid16
stx %o0, [%sp + PTREGS_OFF + PT_V9_I1]
b,pt %xcc, ret_sys_call
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
#endif
/* SunOS's execv() call only specifies the argv argument, the
* environment settings are the same as the calling processes.
*/
.globl sunos_execv
sys_execve:
sethi %hi(sparc_execve), %g1
ba,pt %xcc, execve_merge
or %g1, %lo(sparc_execve), %g1
#ifdef CONFIG_COMPAT
.globl sys_execve
sunos_execv:
stx %g0, [%sp + PTREGS_OFF + PT_V9_I2]
.globl sys32_execve
sys32_execve:
sethi %hi(sparc32_execve), %g1
or %g1, %lo(sparc32_execve), %g1
#endif
execve_merge:
flushw
jmpl %g1, %g0
add %sp, PTREGS_OFF, %o0
.globl sys_pipe, sys_sigpause, sys_nis_syscall
.globl sys_sigsuspend, sys_rt_sigsuspend
.globl sys_rt_sigreturn
.globl sys_ptrace
.globl sys_sigaltstack
.align 32
sys_pipe: ba,pt %xcc, sparc_pipe
add %sp, PTREGS_OFF, %o0
sys_nis_syscall:ba,pt %xcc, c_sys_nis_syscall
add %sp, PTREGS_OFF, %o0
sys_memory_ordering:
ba,pt %xcc, sparc_memory_ordering
add %sp, PTREGS_OFF, %o1
sys_sigaltstack:ba,pt %xcc, do_sigaltstack
add %i6, STACK_BIAS, %o2
#ifdef CONFIG_COMPAT
.globl sys32_sigstack
sys32_sigstack: ba,pt %xcc, do_sys32_sigstack
mov %i6, %o2
.globl sys32_sigaltstack
sys32_sigaltstack:
ba,pt %xcc, do_sys32_sigaltstack
mov %i6, %o2
#endif
.align 32
sys_sigsuspend: add %sp, PTREGS_OFF, %o0
call do_sigsuspend
add %o7, 1f-.-4, %o7
nop
sys_rt_sigsuspend: /* NOTE: %o0,%o1 have a correct value already */
add %sp, PTREGS_OFF, %o2
call do_rt_sigsuspend
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_rt_sigsuspend
sys32_rt_sigsuspend: /* NOTE: %o0,%o1 have a correct value already */
srl %o0, 0, %o0
add %sp, PTREGS_OFF, %o2
call do_rt_sigsuspend32
add %o7, 1f-.-4, %o7
#endif
/* NOTE: %o0 has a correct value already */
sys_sigpause: add %sp, PTREGS_OFF, %o1
call do_sigpause
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_sigreturn
sys32_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_sigreturn32
add %o7, 1f-.-4, %o7
nop
#endif
sys_rt_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_rt_sigreturn
add %o7, 1f-.-4, %o7
nop
#ifdef CONFIG_COMPAT
.globl sys32_rt_sigreturn
sys32_rt_sigreturn:
add %sp, PTREGS_OFF, %o0
call do_rt_sigreturn32
add %o7, 1f-.-4, %o7
nop
#endif
sys_ptrace: add %sp, PTREGS_OFF, %o0
call do_ptrace
add %o7, 1f-.-4, %o7
nop
.align 32
1: ldx [%curptr + TI_FLAGS], %l5
andcc %l5, _TIF_SYSCALL_TRACE, %g0
be,pt %icc, rtrap
clr %l6
call syscall_trace
nop
ba,pt %xcc, rtrap
clr %l6
/* This is how fork() was meant to be done, 8 instruction entry.
*
* I questioned the following code briefly, let me clear things
* up so you must not reason on it like I did.
*
* Know the fork_kpsr etc. we use in the sparc32 port? We don't
* need it here because the only piece of window state we copy to
* the child is the CWP register. Even if the parent sleeps,
* we are safe because we stuck it into pt_regs of the parent
* so it will not change.
*
* XXX This raises the question, whether we can do the same on
* XXX sparc32 to get rid of fork_kpsr _and_ fork_kwim. The
* XXX answer is yes. We stick fork_kpsr in UREG_G0 and
* XXX fork_kwim in UREG_G1 (global registers are considered
* XXX volatile across a system call in the sparc ABI I think
* XXX if it isn't we can use regs->y instead, anyone who depends
* XXX upon the Y register being preserved across a fork deserves
* XXX to lose).
*
* In fact we should take advantage of that fact for other things
* during system calls...
*/
.globl sys_fork, sys_vfork, sys_clone, sparc_exit
.globl ret_from_syscall
.align 32
sys_vfork: /* Under Linux, vfork and fork are just special cases of clone. */
sethi %hi(0x4000 | 0x0100 | SIGCHLD), %o0
or %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
ba,pt %xcc, sys_clone
sys_fork: clr %o1
mov SIGCHLD, %o0
sys_clone: flushw
movrz %o1, %fp, %o1
mov 0, %o3
ba,pt %xcc, sparc_do_fork
add %sp, PTREGS_OFF, %o2
ret_from_syscall:
/* Clear SPARC_FLAG_NEWCHILD, switch_to leaves thread.flags in
* %o7 for us. Check performance counter stuff too.
*/
andn %o7, _TIF_NEWCHILD, %l0
stx %l0, [%g6 + TI_FLAGS]
call schedule_tail
mov %g7, %o0
andcc %l0, _TIF_PERFCTR, %g0
be,pt %icc, 1f
nop
ldx [%g6 + TI_PCR], %o7
wr %g0, %o7, %pcr
/* Blackbird errata workaround. See commentary in
* smp.c:smp_percpu_timer_interrupt() for more
* information.
*/
ba,pt %xcc, 99f
nop
.align 64
99: wr %g0, %g0, %pic
rd %pic, %g0
1: b,pt %xcc, ret_sys_call
ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0
sparc_exit: wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV), %pstate
rdpr %otherwin, %g1
rdpr %cansave, %g3
add %g3, %g1, %g3
wrpr %g3, 0x0, %cansave
wrpr %g0, 0x0, %otherwin
wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE), %pstate
ba,pt %xcc, sys_exit
stb %g0, [%g6 + TI_WSAVED]
linux_sparc_ni_syscall:
sethi %hi(sys_ni_syscall), %l7
b,pt %xcc, 4f
or %l7, %lo(sys_ni_syscall), %l7
linux_syscall_trace32:
call syscall_trace
nop
srl %i0, 0, %o0
mov %i4, %o4
srl %i1, 0, %o1
srl %i2, 0, %o2
b,pt %xcc, 2f
srl %i3, 0, %o3
linux_syscall_trace:
call syscall_trace
nop
mov %i0, %o0
mov %i1, %o1
mov %i2, %o2
mov %i3, %o3
b,pt %xcc, 2f
mov %i4, %o4
/* Linux 32-bit and SunOS system calls enter here... */
.align 32
.globl linux_sparc_syscall32
linux_sparc_syscall32:
/* Direct access to user regs, much faster. */
cmp %g1, NR_SYSCALLS ! IEU1 Group
bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI
srl %i0, 0, %o0 ! IEU0
sll %g1, 2, %l4 ! IEU0 Group
#ifdef SYSCALL_TRACING
call syscall_trace_entry
add %sp, PTREGS_OFF, %o0
srl %i0, 0, %o0
#endif
srl %i4, 0, %o4 ! IEU1
lduw [%l7 + %l4], %l7 ! Load
srl %i1, 0, %o1 ! IEU0 Group
ldx [%curptr + TI_FLAGS], %l0 ! Load
srl %i5, 0, %o5 ! IEU1
srl %i2, 0, %o2 ! IEU0 Group
andcc %l0, _TIF_SYSCALL_TRACE, %g0 ! IEU0 Group
bne,pn %icc, linux_syscall_trace32 ! CTI
mov %i0, %l5 ! IEU1
call %l7 ! CTI Group brk forced
srl %i3, 0, %o3 ! IEU0
ba,a,pt %xcc, 3f
/* Linux native and SunOS system calls enter here... */
.align 32
.globl linux_sparc_syscall, ret_sys_call
linux_sparc_syscall:
/* Direct access to user regs, much faster. */
cmp %g1, NR_SYSCALLS ! IEU1 Group
bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI
mov %i0, %o0 ! IEU0
sll %g1, 2, %l4 ! IEU0 Group
#ifdef SYSCALL_TRACING
call syscall_trace_entry
add %sp, PTREGS_OFF, %o0
mov %i0, %o0
#endif
mov %i1, %o1 ! IEU1
lduw [%l7 + %l4], %l7 ! Load
4: mov %i2, %o2 ! IEU0 Group
ldx [%curptr + TI_FLAGS], %l0 ! Load
mov %i3, %o3 ! IEU1
mov %i4, %o4 ! IEU0 Group
andcc %l0, _TIF_SYSCALL_TRACE, %g0 ! IEU1 Group+1 bubble
bne,pn %icc, linux_syscall_trace ! CTI Group
mov %i0, %l5 ! IEU0
2: call %l7 ! CTI Group brk forced
mov %i5, %o5 ! IEU0
nop
3: stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
ret_sys_call:
#ifdef SYSCALL_TRACING
mov %o0, %o1
call syscall_trace_exit
add %sp, PTREGS_OFF, %o0
mov %o1, %o0
#endif
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
sra %o0, 0, %o0
mov %ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
sllx %g2, 32, %g2
/* Check if force_successful_syscall_return()
* was invoked.
*/
ldx [%curptr + TI_FLAGS], %l0
andcc %l0, _TIF_SYSCALL_SUCCESS, %g0
be,pt %icc, 1f
andn %l0, _TIF_SYSCALL_SUCCESS, %l0
ba,pt %xcc, 80f
stx %l0, [%curptr + TI_FLAGS]
1:
cmp %o0, -ERESTART_RESTARTBLOCK
bgeu,pn %xcc, 1f
andcc %l0, _TIF_SYSCALL_TRACE, %l6
80:
/* System call success, clear Carry condition code. */
andn %g3, %g2, %g3
stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
bne,pn %icc, linux_syscall_trace2
add %l1, 0x4, %l2 ! npc = npc+4
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
ba,pt %xcc, rtrap_clr_l6
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
1:
/* System call failure, set Carry condition code.
* Also, get abs(errno) to return to the process.
*/
andcc %l0, _TIF_SYSCALL_TRACE, %l6
sub %g0, %o0, %o0
or %g3, %g2, %g3
stx %o0, [%sp + PTREGS_OFF + PT_V9_I0]
mov 1, %l6
stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
bne,pn %icc, linux_syscall_trace2
add %l1, 0x4, %l2 ! npc = npc+4
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
b,pt %xcc, rtrap
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
linux_syscall_trace2:
call syscall_trace
nop
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
ba,pt %xcc, rtrap
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
.align 32
.globl __flushw_user
__flushw_user:
rdpr %otherwin, %g1
brz,pn %g1, 2f
clr %g2
1: save %sp, -128, %sp
rdpr %otherwin, %g1
brnz,pt %g1, 1b
add %g2, 1, %g2
1: sub %g2, 1, %g2
brnz,pt %g2, 1b
restore %g0, %g0, %g0
2: retl
nop
Reference in New Issue Copy Permalink