AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 08:35:10 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b994738bd2
linux_dsm_epyc7002/arch/arm/boot/dts/dra72-evm.dts

46 lines
931 B
Plaintext
Raw Normal View History

ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
/*
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
#include "dra72-evm-common.dtsi"
ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
/ {
model = "TI DRA722";
ARM: dts: dra7: Add missing unit name to memory nodes This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31 17:35:37 +07:00
memory@0 {
ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
device_type = "memory";
ARM: dts: DRA7: change address-cells and size-cells DRA7 SoC has the capability to support DDR memory upto 4GB. In order to represent this in memory dt node, the address-cells and size cells should be 2. So, changing the address-cells and size-cells to 2 and updating the memory nodes accordingly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-24 17:11:04 +07:00
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
};
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
};
ARM: dts: dra72-evm: Add MMC nodes Add MMC1 and 2 nodes. MMC1 is SDcard and MMC2 is eMMC. NOTE on MMC1 card detect: Ideally, we should be using in-built SDCD support, but we dont have it yet. So, use the fact that control module of DRA7 is setup such that no matter what mode one configures it, GPIO option is always hardwired in - use GPIO mode for SDcard detection. [peter.ujfalusi@ti.com] The power line feeding the SD card is also used by other devices on the EVM. Use generic name instead of mmc2_3v3 so when other devices want to use the same regulator it will look a bit better. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-21 21:35:56 +07:00
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
&tps65917_regulators {
ldo2_reg: ldo2 {
/* LDO2_OUT --> TP1017 (UNUSED) */
regulator-name = "ldo2";
ARM: dts: dra72-evm: Add fixed regulator representing DVDD supply for aic3106 The DVDD is supplied via TPS77018DBVT fixed regulator from evm_3v3 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-24 14:20:03 +07:00
regulator-min-microvolt = <1800000>;
ARM: dts: dra72-evm: add evm_3v3_sd regulator Add a node for evm_3v3_sd using pcf which feeds on to mmc vdd. Update mapping for vmmc-supply and vmmc_aux-supply. evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-30 15:13:34 +07:00
regulator-max-microvolt = <3300000>;
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
regulator-allow-bypass;
ARM: dts: dra72-evm: Audio support The board uses tlv320aic3106 codec connected to McASP3. The master clock for the codec and McASP3 is coming from ATL2. McASP3 is the master on the I2S bus. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-24 14:20:05 +07:00
};
ARM: dts: dra72-evm: Enable I2C1 node I2C1 bus is used for the following peripherals P8 connector (MLB) TLV320AIC3106 Audio codec J15 LCD header 24WC256 eeprom TMP102AIDRLT temperature sensor PCF8575 GPIO expander PCA9306 i2c voltage translator -> Goes to P9 for comm interface P2 expansion connector TPS65917 PMIC The slowest speed of all the peripherals seems to be 400KHz. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-28 13:18:53 +07:00
};
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
&hdmi {
vdda-supply = <&ldo3_reg>;
ARM: dts: dra72-evm: Add MMC nodes Add MMC1 and 2 nodes. MMC1 is SDcard and MMC2 is eMMC. NOTE on MMC1 card detect: Ideally, we should be using in-built SDCD support, but we dont have it yet. So, use the fact that control module of DRA7 is setup such that no matter what mode one configures it, GPIO option is always hardwired in - use GPIO mode for SDcard detection. [peter.ujfalusi@ti.com] The power line feeding the SD card is also used by other devices on the EVM. Use generic name instead of mmc2_3v3 so when other devices want to use the same regulator it will look a bit better. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-21 21:35:56 +07:00
};
ARM: dts: dra72x-evm: Enable CPSW and MDIO Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-03 16:58:13 +07:00
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
&pcf_gpio_21 {
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
ARM: dts: dra72x-evm: Enable CPSW and MDIO Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-03 16:58:13 +07:00
};
&mac {
ARM: dts: DRA72: switch to cpsw slave0 for ethernet On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to select cpsw slave0. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-22 16:03:44 +07:00
slaves = <1>;
ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios With the current implementation of GPIO hogging and with gpio-pcf857x is built as module, ethernet doesn't work on boot and doesn't throw any error/warning to user. Ethernet becomes operational when inserting gpio-pcf857x module, even this time there is no error/warning logs to user that ethernet is operational. When using with NFS rootfs and gpio-pcf857x as module, board doesn't boot as it doesn't get any ip address and doesn't throw any error/warning. To over come this, now cpsw driver tries to get mode-gpios. When gpio-pcf857x is built as module it will throw error, so that user can decide either to built in gpio-pcf857x to continue with nfs boot or choose alternate rootfs filesystem like sd/ramdisk. When using mmc/ramdisk as root fs, cpsw will probe defer and re-probes again when gpio-pcf857x module is inserted and ethernet becomes operational. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-21 21:53:51 +07:00
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
ARM: dts: dra72x-evm: Enable CPSW and MDIO Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-03 16:58:13 +07:00
};
ARM: dts: DRA72: switch to cpsw slave0 for ethernet On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to select cpsw slave0. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-22 16:03:44 +07:00
&cpsw_emac0 {
ARM: dts: dra72x-evm: Enable CPSW and MDIO Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-03 16:58:13 +07:00
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
Reference in New Issue Copy Permalink