linux_dsm_epyc7002/drivers/gpu/drm/panel/panel-simple.c

3786 lines
88 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013, NVIDIA Corporation. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <video/display_timing.h>
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
#include <video/of_display_timing.h>
#include <video/videomode.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
/**
* @modes: Pointer to array of fixed modes appropriate for this panel. If
* only one mode then this can just be the address of this the mode.
* NOTE: cannot be used with "timings" and also if this is specified
* then you cannot override the mode in the device tree.
* @num_modes: Number of elements in modes array.
* @timings: Pointer to array of display timings. NOTE: cannot be used with
* "modes" and also these will be used to validate a device tree
* override if one is present.
* @num_timings: Number of elements in timings array.
* @bpc: Bits per color.
* @size: Structure containing the physical size of this panel.
* @delay: Structure containing various delay values for this panel.
* @bus_format: See MEDIA_BUS_FMT_... defines.
* @bus_flags: See DRM_BUS_FLAG_... defines.
*/
struct panel_desc {
const struct drm_display_mode *modes;
unsigned int num_modes;
const struct display_timing *timings;
unsigned int num_timings;
unsigned int bpc;
/**
* @width: width (in millimeters) of the panel's active display area
* @height: height (in millimeters) of the panel's active display area
*/
struct {
unsigned int width;
unsigned int height;
} size;
/**
* @prepare: the time (in milliseconds) that it takes for the panel to
* become ready and start receiving video data
* @hpd_absent_delay: Add this to the prepare delay if we know Hot
* Plug Detect isn't used.
* @enable: the time (in milliseconds) that it takes for the panel to
* display the first valid frame after starting to receive
* video data
* @disable: the time (in milliseconds) that it takes for the panel to
* turn the display off (no content is visible)
* @unprepare: the time (in milliseconds) that it takes for the panel
* to power itself down completely
*/
struct {
unsigned int prepare;
unsigned int hpd_absent_delay;
unsigned int enable;
unsigned int disable;
unsigned int unprepare;
} delay;
u32 bus_format;
u32 bus_flags;
int connector_type;
};
struct panel_simple {
struct drm_panel base;
bool prepared;
bool enabled;
bool no_hpd;
const struct panel_desc *desc;
struct backlight_device *backlight;
struct regulator *supply;
struct i2c_adapter *ddc;
struct gpio_desc *enable_gpio;
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
struct drm_display_mode override_mode;
};
static inline struct panel_simple *to_panel_simple(struct drm_panel *panel)
{
return container_of(panel, struct panel_simple, base);
}
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
static unsigned int panel_simple_get_timings_modes(struct panel_simple *panel)
{
struct drm_connector *connector = panel->base.connector;
struct drm_device *drm = panel->base.drm;
struct drm_display_mode *mode;
unsigned int i, num = 0;
for (i = 0; i < panel->desc->num_timings; i++) {
const struct display_timing *dt = &panel->desc->timings[i];
struct videomode vm;
videomode_from_timing(dt, &vm);
mode = drm_mode_create(drm);
if (!mode) {
dev_err(drm->dev, "failed to add mode %ux%u\n",
dt->hactive.typ, dt->vactive.typ);
continue;
}
drm_display_mode_from_videomode(&vm, mode);
mode->type |= DRM_MODE_TYPE_DRIVER;
if (panel->desc->num_timings == 1)
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
num++;
}
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
return num;
}
static unsigned int panel_simple_get_display_modes(struct panel_simple *panel)
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
{
struct drm_connector *connector = panel->base.connector;
struct drm_device *drm = panel->base.drm;
struct drm_display_mode *mode;
unsigned int i, num = 0;
for (i = 0; i < panel->desc->num_modes; i++) {
const struct drm_display_mode *m = &panel->desc->modes[i];
mode = drm_mode_duplicate(drm, m);
if (!mode) {
dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
m->hdisplay, m->vdisplay, m->vrefresh);
continue;
}
mode->type |= DRM_MODE_TYPE_DRIVER;
if (panel->desc->num_modes == 1)
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
num++;
}
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
return num;
}
static int panel_simple_get_non_edid_modes(struct panel_simple *panel)
{
struct drm_connector *connector = panel->base.connector;
struct drm_device *drm = panel->base.drm;
struct drm_display_mode *mode;
bool has_override = panel->override_mode.type;
unsigned int num = 0;
if (!panel->desc)
return 0;
if (has_override) {
mode = drm_mode_duplicate(drm, &panel->override_mode);
if (mode) {
drm_mode_probed_add(connector, mode);
num = 1;
} else {
dev_err(drm->dev, "failed to add override mode\n");
}
}
/* Only add timings if override was not there or failed to validate */
if (num == 0 && panel->desc->num_timings)
num = panel_simple_get_timings_modes(panel);
/*
* Only add fixed modes if timings/override added no mode.
*
* We should only ever have either the display timings specified
* or a fixed mode. Anything else is rather bogus.
*/
WARN_ON(panel->desc->num_timings && panel->desc->num_modes);
if (num == 0)
num = panel_simple_get_display_modes(panel);
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
connector->display_info.bpc = panel->desc->bpc;
connector->display_info.width_mm = panel->desc->size.width;
connector->display_info.height_mm = panel->desc->size.height;
if (panel->desc->bus_format)
drm_display_info_set_bus_formats(&connector->display_info,
&panel->desc->bus_format, 1);
connector->display_info.bus_flags = panel->desc->bus_flags;
return num;
}
static int panel_simple_disable(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
if (!p->enabled)
return 0;
if (p->backlight) {
p->backlight->props.power = FB_BLANK_POWERDOWN;
p->backlight->props.state |= BL_CORE_FBBLANK;
backlight_update_status(p->backlight);
}
if (p->desc->delay.disable)
msleep(p->desc->delay.disable);
p->enabled = false;
return 0;
}
static int panel_simple_unprepare(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
if (!p->prepared)
return 0;
gpiod_set_value_cansleep(p->enable_gpio, 0);
regulator_disable(p->supply);
if (p->desc->delay.unprepare)
msleep(p->desc->delay.unprepare);
p->prepared = false;
return 0;
}
static int panel_simple_prepare(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
unsigned int delay;
int err;
if (p->prepared)
return 0;
err = regulator_enable(p->supply);
if (err < 0) {
dev_err(panel->dev, "failed to enable supply: %d\n", err);
return err;
}
gpiod_set_value_cansleep(p->enable_gpio, 1);
delay = p->desc->delay.prepare;
if (p->no_hpd)
delay += p->desc->delay.hpd_absent_delay;
if (delay)
msleep(delay);
p->prepared = true;
return 0;
}
static int panel_simple_enable(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
if (p->enabled)
return 0;
if (p->desc->delay.enable)
msleep(p->desc->delay.enable);
if (p->backlight) {
p->backlight->props.state &= ~BL_CORE_FBBLANK;
p->backlight->props.power = FB_BLANK_UNBLANK;
backlight_update_status(p->backlight);
}
p->enabled = true;
return 0;
}
static int panel_simple_get_modes(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
int num = 0;
/* probe EDID if a DDC bus is available */
if (p->ddc) {
struct edid *edid = drm_get_edid(panel->connector, p->ddc);
drm_connector_update_edid_property(panel->connector, edid);
if (edid) {
num += drm_add_edid_modes(panel->connector, edid);
kfree(edid);
}
}
/* add hard-coded panel modes */
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
num += panel_simple_get_non_edid_modes(p);
return num;
}
static int panel_simple_get_timings(struct drm_panel *panel,
unsigned int num_timings,
struct display_timing *timings)
{
struct panel_simple *p = to_panel_simple(panel);
unsigned int i;
if (p->desc->num_timings < num_timings)
num_timings = p->desc->num_timings;
if (timings)
for (i = 0; i < num_timings; i++)
timings[i] = p->desc->timings[i];
return p->desc->num_timings;
}
static const struct drm_panel_funcs panel_simple_funcs = {
.disable = panel_simple_disable,
.unprepare = panel_simple_unprepare,
.prepare = panel_simple_prepare,
.enable = panel_simple_enable,
.get_modes = panel_simple_get_modes,
.get_timings = panel_simple_get_timings,
};
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
#define PANEL_SIMPLE_BOUNDS_CHECK(to_check, bounds, field) \
(to_check->field.typ >= bounds->field.min && \
to_check->field.typ <= bounds->field.max)
static void panel_simple_parse_panel_timing_node(struct device *dev,
struct panel_simple *panel,
const struct display_timing *ot)
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
{
const struct panel_desc *desc = panel->desc;
struct videomode vm;
unsigned int i;
if (WARN_ON(desc->num_modes)) {
dev_err(dev, "Reject override mode: panel has a fixed mode\n");
return;
}
if (WARN_ON(!desc->num_timings)) {
dev_err(dev, "Reject override mode: no timings specified\n");
return;
}
for (i = 0; i < panel->desc->num_timings; i++) {
const struct display_timing *dt = &panel->desc->timings[i];
if (!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hactive) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hfront_porch) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hback_porch) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hsync_len) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vactive) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vfront_porch) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vback_porch) ||
!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vsync_len))
continue;
if (ot->flags != dt->flags)
continue;
videomode_from_timing(ot, &vm);
drm_display_mode_from_videomode(&vm, &panel->override_mode);
panel->override_mode.type |= DRM_MODE_TYPE_DRIVER |
DRM_MODE_TYPE_PREFERRED;
break;
}
if (WARN_ON(!panel->override_mode.type))
dev_err(dev, "Reject override mode: No display_timing found\n");
}
static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
{
struct device_node *backlight, *ddc;
struct panel_simple *panel;
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
struct display_timing dt;
int err;
panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
if (!panel)
return -ENOMEM;
panel->enabled = false;
panel->prepared = false;
panel->desc = desc;
panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
panel->supply = devm_regulator_get(dev, "power");
if (IS_ERR(panel->supply))
return PTR_ERR(panel->supply);
panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(panel->enable_gpio)) {
err = PTR_ERR(panel->enable_gpio);
if (err != -EPROBE_DEFER)
dev_err(dev, "failed to request GPIO: %d\n", err);
return err;
}
backlight = of_parse_phandle(dev->of_node, "backlight", 0);
if (backlight) {
panel->backlight = of_find_backlight_by_node(backlight);
of_node_put(backlight);
if (!panel->backlight)
return -EPROBE_DEFER;
}
ddc = of_parse_phandle(dev->of_node, "ddc-i2c-bus", 0);
if (ddc) {
panel->ddc = of_find_i2c_adapter_by_node(ddc);
of_node_put(ddc);
if (!panel->ddc) {
err = -EPROBE_DEFER;
goto free_backlight;
}
}
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
panel_simple_parse_panel_timing_node(dev, panel, &dt);
drm/panel: simple: Add ability to override typical timing This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
2019-07-12 03:34:53 +07:00
drm_panel_init(&panel->base, dev, &panel_simple_funcs,
desc->connector_type);
err = drm_panel_add(&panel->base);
if (err < 0)
goto free_ddc;
dev_set_drvdata(dev, panel);
return 0;
free_ddc:
if (panel->ddc)
put_device(&panel->ddc->dev);
free_backlight:
if (panel->backlight)
put_device(&panel->backlight->dev);
return err;
}
static int panel_simple_remove(struct device *dev)
{
struct panel_simple *panel = dev_get_drvdata(dev);
drm_panel_remove(&panel->base);
panel_simple_disable(&panel->base);
panel_simple_unprepare(&panel->base);
if (panel->ddc)
put_device(&panel->ddc->dev);
if (panel->backlight)
put_device(&panel->backlight->dev);
return 0;
}
static void panel_simple_shutdown(struct device *dev)
{
struct panel_simple *panel = dev_get_drvdata(dev);
panel_simple_disable(&panel->base);
panel_simple_unprepare(&panel->base);
}
static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 10,
.vtotal = 272 + 2 + 10 + 2,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
.modes = &ampire_am_480272h3tmqw_t01h_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 105,
.height = 67,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 0,
.hsync_end = 800 + 0 + 255,
.htotal = 800 + 0 + 255 + 0,
.vdisplay = 480,
.vsync_start = 480 + 2,
.vsync_end = 480 + 2 + 45,
.vtotal = 480 + 2 + 45 + 0,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
static const struct panel_desc ampire_am800480r3tmqwa1h = {
.modes = &ampire_am800480r3tmqwa1h_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct display_timing santek_st0700i5y_rbslw_f_timing = {
.pixelclock = { 26400000, 33300000, 46800000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 16, 210, 354 },
.hback_porch = { 45, 36, 6 },
.hsync_len = { 1, 10, 40 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 7, 22, 147 },
.vback_porch = { 22, 13, 3 },
.vsync_len = { 1, 10, 20 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE
};
static const struct panel_desc armadeus_st0700_adapt = {
.timings = &santek_st0700i5y_rbslw_f_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
static const struct drm_display_mode auo_b101aw03_mode = {
.clock = 51450,
.hdisplay = 1024,
.hsync_start = 1024 + 156,
.hsync_end = 1024 + 156 + 8,
.htotal = 1024 + 156 + 8 + 156,
.vdisplay = 600,
.vsync_start = 600 + 16,
.vsync_end = 600 + 16 + 6,
.vtotal = 600 + 16 + 6 + 16,
.vrefresh = 60,
};
static const struct panel_desc auo_b101aw03 = {
.modes = &auo_b101aw03_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 223,
.height = 125,
},
};
static const struct display_timing auo_b101ean01_timing = {
.pixelclock = { 65300000, 72500000, 75000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 18, 119, 119 },
.hback_porch = { 21, 21, 21 },
.hsync_len = { 32, 32, 32 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 4, 4, 4 },
.vback_porch = { 8, 8, 8 },
.vsync_len = { 18, 20, 20 },
};
static const struct panel_desc auo_b101ean01 = {
.timings = &auo_b101ean01_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 217,
.height = 136,
},
};
static const struct drm_display_mode auo_b101xtn01_mode = {
.clock = 72000,
.hdisplay = 1366,
.hsync_start = 1366 + 20,
.hsync_end = 1366 + 20 + 70,
.htotal = 1366 + 20 + 70,
.vdisplay = 768,
.vsync_start = 768 + 14,
.vsync_end = 768 + 14 + 42,
.vtotal = 768 + 14 + 42,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc auo_b101xtn01 = {
.modes = &auo_b101xtn01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 223,
.height = 125,
},
};
static const struct drm_display_mode auo_b116xw03_mode = {
.clock = 70589,
.hdisplay = 1366,
.hsync_start = 1366 + 40,
.hsync_end = 1366 + 40 + 40,
.htotal = 1366 + 40 + 40 + 32,
.vdisplay = 768,
.vsync_start = 768 + 10,
.vsync_end = 768 + 10 + 12,
.vtotal = 768 + 10 + 12 + 6,
.vrefresh = 60,
};
static const struct panel_desc auo_b116xw03 = {
.modes = &auo_b116xw03_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 256,
.height = 144,
},
};
static const struct drm_display_mode auo_b133xtn01_mode = {
.clock = 69500,
.hdisplay = 1366,
.hsync_start = 1366 + 48,
.hsync_end = 1366 + 48 + 32,
.htotal = 1366 + 48 + 32 + 20,
.vdisplay = 768,
.vsync_start = 768 + 3,
.vsync_end = 768 + 3 + 6,
.vtotal = 768 + 3 + 6 + 13,
.vrefresh = 60,
};
static const struct panel_desc auo_b133xtn01 = {
.modes = &auo_b133xtn01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 293,
.height = 165,
},
};
static const struct drm_display_mode auo_b133htn01_mode = {
.clock = 150660,
.hdisplay = 1920,
.hsync_start = 1920 + 172,
.hsync_end = 1920 + 172 + 80,
.htotal = 1920 + 172 + 80 + 60,
.vdisplay = 1080,
.vsync_start = 1080 + 25,
.vsync_end = 1080 + 25 + 10,
.vtotal = 1080 + 25 + 10 + 10,
.vrefresh = 60,
};
static const struct panel_desc auo_b133htn01 = {
.modes = &auo_b133htn01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 293,
.height = 165,
},
.delay = {
.prepare = 105,
.enable = 20,
.unprepare = 50,
},
};
static const struct display_timing auo_g070vvn01_timings = {
.pixelclock = { 33300000, 34209000, 45000000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 20, 40, 200 },
.hback_porch = { 87, 40, 1 },
.hsync_len = { 1, 48, 87 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 5, 13, 200 },
.vback_porch = { 31, 31, 29 },
.vsync_len = { 1, 1, 3 },
};
static const struct panel_desc auo_g070vvn01 = {
.timings = &auo_g070vvn01_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 152,
.height = 91,
},
.delay = {
.prepare = 200,
.enable = 50,
.disable = 50,
.unprepare = 1000,
},
};
static const struct drm_display_mode auo_g101evn010_mode = {
.clock = 68930,
.hdisplay = 1280,
.hsync_start = 1280 + 82,
.hsync_end = 1280 + 82 + 2,
.htotal = 1280 + 82 + 2 + 84,
.vdisplay = 800,
.vsync_start = 800 + 8,
.vsync_end = 800 + 8 + 2,
.vtotal = 800 + 8 + 2 + 6,
.vrefresh = 60,
};
static const struct panel_desc auo_g101evn010 = {
.modes = &auo_g101evn010_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 216,
.height = 135,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode auo_g104sn02_mode = {
.clock = 40000,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 216,
.htotal = 800 + 40 + 216 + 128,
.vdisplay = 600,
.vsync_start = 600 + 10,
.vsync_end = 600 + 10 + 35,
.vtotal = 600 + 10 + 35 + 2,
.vrefresh = 60,
};
static const struct panel_desc auo_g104sn02 = {
.modes = &auo_g104sn02_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 211,
.height = 158,
},
};
static const struct display_timing auo_g133han01_timings = {
.pixelclock = { 134000000, 141200000, 149000000 },
.hactive = { 1920, 1920, 1920 },
.hfront_porch = { 39, 58, 77 },
.hback_porch = { 59, 88, 117 },
.hsync_len = { 28, 42, 56 },
.vactive = { 1080, 1080, 1080 },
.vfront_porch = { 3, 8, 11 },
.vback_porch = { 5, 14, 19 },
.vsync_len = { 4, 14, 19 },
};
static const struct panel_desc auo_g133han01 = {
.timings = &auo_g133han01_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 293,
.height = 165,
},
.delay = {
.prepare = 200,
.enable = 50,
.disable = 50,
.unprepare = 1000,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing auo_g185han01_timings = {
.pixelclock = { 120000000, 144000000, 175000000 },
.hactive = { 1920, 1920, 1920 },
.hfront_porch = { 36, 120, 148 },
.hback_porch = { 24, 88, 108 },
.hsync_len = { 20, 48, 64 },
.vactive = { 1080, 1080, 1080 },
.vfront_porch = { 6, 10, 40 },
.vback_porch = { 2, 5, 20 },
.vsync_len = { 2, 5, 20 },
};
static const struct panel_desc auo_g185han01 = {
.timings = &auo_g185han01_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 409,
.height = 230,
},
.delay = {
.prepare = 50,
.enable = 200,
.disable = 110,
.unprepare = 1000,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing auo_p320hvn03_timings = {
.pixelclock = { 106000000, 148500000, 164000000 },
.hactive = { 1920, 1920, 1920 },
.hfront_porch = { 25, 50, 130 },
.hback_porch = { 25, 50, 130 },
.hsync_len = { 20, 40, 105 },
.vactive = { 1080, 1080, 1080 },
.vfront_porch = { 8, 17, 150 },
.vback_porch = { 8, 17, 150 },
.vsync_len = { 4, 11, 100 },
};
static const struct panel_desc auo_p320hvn03 = {
.timings = &auo_p320hvn03_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 698,
.height = 393,
},
.delay = {
.prepare = 1,
.enable = 450,
.unprepare = 500,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode auo_t215hvn01_mode = {
.clock = 148800,
.hdisplay = 1920,
.hsync_start = 1920 + 88,
.hsync_end = 1920 + 88 + 44,
.htotal = 1920 + 88 + 44 + 148,
.vdisplay = 1080,
.vsync_start = 1080 + 4,
.vsync_end = 1080 + 4 + 5,
.vtotal = 1080 + 4 + 5 + 36,
.vrefresh = 60,
};
static const struct panel_desc auo_t215hvn01 = {
.modes = &auo_t215hvn01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 430,
.height = 270,
},
.delay = {
.disable = 5,
.unprepare = 1000,
}
};
static const struct drm_display_mode avic_tm070ddh03_mode = {
.clock = 51200,
.hdisplay = 1024,
.hsync_start = 1024 + 160,
.hsync_end = 1024 + 160 + 4,
.htotal = 1024 + 160 + 4 + 156,
.vdisplay = 600,
.vsync_start = 600 + 17,
.vsync_end = 600 + 17 + 1,
.vtotal = 600 + 17 + 1 + 17,
.vrefresh = 60,
};
static const struct panel_desc avic_tm070ddh03 = {
.modes = &avic_tm070ddh03_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 154,
.height = 90,
},
.delay = {
.prepare = 20,
.enable = 200,
.disable = 200,
},
};
static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
.clock = 30000,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 48,
.htotal = 800 + 40 + 48 + 40,
.vdisplay = 480,
.vsync_start = 480 + 13,
.vsync_end = 480 + 13 + 3,
.vtotal = 480 + 13 + 3 + 29,
};
static const struct panel_desc bananapi_s070wv20_ct16 = {
.modes = &bananapi_s070wv20_ct16_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 86,
},
};
static const struct drm_display_mode boe_hv070wsa_mode = {
.clock = 42105,
.hdisplay = 1024,
.hsync_start = 1024 + 30,
.hsync_end = 1024 + 30 + 30,
.htotal = 1024 + 30 + 30 + 30,
.vdisplay = 600,
.vsync_start = 600 + 10,
.vsync_end = 600 + 10 + 10,
.vtotal = 600 + 10 + 10 + 10,
.vrefresh = 60,
};
static const struct panel_desc boe_hv070wsa = {
.modes = &boe_hv070wsa_mode,
.num_modes = 1,
.size = {
.width = 154,
.height = 90,
},
};
static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
{
.clock = 71900,
.hdisplay = 1280,
.hsync_start = 1280 + 48,
.hsync_end = 1280 + 48 + 32,
.htotal = 1280 + 48 + 32 + 80,
.vdisplay = 800,
.vsync_start = 800 + 3,
.vsync_end = 800 + 3 + 5,
.vtotal = 800 + 3 + 5 + 24,
.vrefresh = 60,
},
{
.clock = 57500,
.hdisplay = 1280,
.hsync_start = 1280 + 48,
.hsync_end = 1280 + 48 + 32,
.htotal = 1280 + 48 + 32 + 80,
.vdisplay = 800,
.vsync_start = 800 + 3,
.vsync_end = 800 + 3 + 5,
.vtotal = 800 + 3 + 5 + 24,
.vrefresh = 48,
},
};
static const struct panel_desc boe_nv101wxmn51 = {
.modes = boe_nv101wxmn51_modes,
.num_modes = ARRAY_SIZE(boe_nv101wxmn51_modes),
.bpc = 8,
.size = {
.width = 217,
.height = 136,
},
.delay = {
.prepare = 210,
.enable = 50,
.unprepare = 160,
},
};
static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 5,
.hsync_end = 480 + 5 + 5,
.htotal = 480 + 5 + 5 + 40,
.vdisplay = 272,
.vsync_start = 272 + 8,
.vsync_end = 272 + 8 + 8,
.vtotal = 272 + 8 + 8 + 8,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc cdtech_s043wq26h_ct7 = {
.modes = &cdtech_s043wq26h_ct7_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode cdtech_s070wv95_ct16_mode = {
.clock = 35000,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 40,
.htotal = 800 + 40 + 40 + 48,
.vdisplay = 480,
.vsync_start = 480 + 29,
.vsync_end = 480 + 29 + 13,
.vtotal = 480 + 29 + 13 + 3,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc cdtech_s070wv95_ct16 = {
.modes = &cdtech_s070wv95_ct16_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 154,
.height = 85,
},
};
static const struct drm_display_mode chunghwa_claa070wp03xg_mode = {
.clock = 66770,
.hdisplay = 800,
.hsync_start = 800 + 49,
.hsync_end = 800 + 49 + 33,
.htotal = 800 + 49 + 33 + 17,
.vdisplay = 1280,
.vsync_start = 1280 + 1,
.vsync_end = 1280 + 1 + 7,
.vtotal = 1280 + 1 + 7 + 15,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc chunghwa_claa070wp03xg = {
.modes = &chunghwa_claa070wp03xg_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 94,
.height = 150,
},
};
static const struct drm_display_mode chunghwa_claa101wa01a_mode = {
.clock = 72070,
.hdisplay = 1366,
.hsync_start = 1366 + 58,
.hsync_end = 1366 + 58 + 58,
.htotal = 1366 + 58 + 58 + 58,
.vdisplay = 768,
.vsync_start = 768 + 4,
.vsync_end = 768 + 4 + 4,
.vtotal = 768 + 4 + 4 + 4,
.vrefresh = 60,
};
static const struct panel_desc chunghwa_claa101wa01a = {
.modes = &chunghwa_claa101wa01a_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 220,
.height = 120,
},
};
static const struct drm_display_mode chunghwa_claa101wb01_mode = {
.clock = 69300,
.hdisplay = 1366,
.hsync_start = 1366 + 48,
.hsync_end = 1366 + 48 + 32,
.htotal = 1366 + 48 + 32 + 20,
.vdisplay = 768,
.vsync_start = 768 + 16,
.vsync_end = 768 + 16 + 8,
.vtotal = 768 + 16 + 8 + 16,
.vrefresh = 60,
};
static const struct panel_desc chunghwa_claa101wb01 = {
.modes = &chunghwa_claa101wb01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 223,
.height = 125,
},
};
static const struct drm_display_mode dataimage_scf0700c48ggu18_mode = {
.clock = 33260,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 128,
.htotal = 800 + 40 + 128 + 88,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 2,
.vtotal = 480 + 10 + 2 + 33,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc dataimage_scf0700c48ggu18 = {
.modes = &dataimage_scf0700c48ggu18_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct display_timing dlc_dlc0700yzg_1_timing = {
.pixelclock = { 45000000, 51200000, 57000000 },
.hactive = { 1024, 1024, 1024 },
.hfront_porch = { 100, 106, 113 },
.hback_porch = { 100, 106, 113 },
.hsync_len = { 100, 108, 114 },
.vactive = { 600, 600, 600 },
.vfront_porch = { 8, 11, 15 },
.vback_porch = { 8, 11, 15 },
.vsync_len = { 9, 13, 15 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc dlc_dlc0700yzg_1 = {
.timings = &dlc_dlc0700yzg_1_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 86,
},
.delay = {
.prepare = 30,
.enable = 200,
.disable = 200,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing dlc_dlc1010gig_timing = {
.pixelclock = { 68900000, 71100000, 73400000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 43, 53, 63 },
.hback_porch = { 43, 53, 63 },
.hsync_len = { 44, 54, 64 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 5, 8, 11 },
.vback_porch = { 5, 8, 11 },
.vsync_len = { 5, 7, 11 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc dlc_dlc1010gig = {
.timings = &dlc_dlc1010gig_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 216,
.height = 135,
},
.delay = {
.prepare = 60,
.enable = 150,
.disable = 100,
.unprepare = 60,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode edt_et035012dm6_mode = {
.clock = 6500,
.hdisplay = 320,
.hsync_start = 320 + 20,
.hsync_end = 320 + 20 + 30,
.htotal = 320 + 20 + 68,
.vdisplay = 240,
.vsync_start = 240 + 4,
.vsync_end = 240 + 4 + 4,
.vtotal = 240 + 4 + 4 + 14,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc edt_et035012dm6 = {
.modes = &edt_et035012dm6_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 70,
.height = 52,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
};
static const struct drm_display_mode edt_etm0430g0dh6_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 10,
.vtotal = 272 + 2 + 10 + 2,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc edt_etm0430g0dh6 = {
.modes = &edt_etm0430g0dh6_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 95,
.height = 54,
},
};
static const struct drm_display_mode edt_et057090dhu_mode = {
.clock = 25175,
.hdisplay = 640,
.hsync_start = 640 + 16,
.hsync_end = 640 + 16 + 30,
.htotal = 640 + 16 + 30 + 114,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 3,
.vtotal = 480 + 10 + 3 + 32,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc edt_et057090dhu = {
.modes = &edt_et057090dhu_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 115,
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 128,
.htotal = 800 + 40 + 128 + 88,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 2,
.vtotal = 480 + 10 + 2 + 33,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc edt_etm0700g0dh6 = {
.modes = &edt_etm0700g0dh6_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct panel_desc edt_etm0700g0bdh6 = {
.modes = &edt_etm0700g0dh6_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct display_timing evervision_vgg804821_timing = {
.pixelclock = { 27600000, 33300000, 50000000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 40, 66, 70 },
.hback_porch = { 40, 67, 70 },
.hsync_len = { 40, 67, 70 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 6, 10, 10 },
.vback_porch = { 7, 11, 11 },
.vsync_len = { 7, 11, 11 },
.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE |
DISPLAY_FLAGS_SYNC_NEGEDGE,
};
static const struct panel_desc evervision_vgg804821 = {
.timings = &evervision_vgg804821_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 108,
.height = 64,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
};
static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
.clock = 32260,
.hdisplay = 800,
.hsync_start = 800 + 168,
.hsync_end = 800 + 168 + 64,
.htotal = 800 + 168 + 64 + 88,
.vdisplay = 480,
.vsync_start = 480 + 37,
.vsync_end = 480 + 37 + 2,
.vtotal = 480 + 37 + 2 + 8,
.vrefresh = 60,
};
static const struct panel_desc foxlink_fl500wvr00_a0t = {
.modes = &foxlink_fl500wvr00_a0t_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 108,
.height = 65,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode friendlyarm_hd702e_mode = {
.clock = 67185,
.hdisplay = 800,
.hsync_start = 800 + 20,
.hsync_end = 800 + 20 + 24,
.htotal = 800 + 20 + 24 + 20,
.vdisplay = 1280,
.vsync_start = 1280 + 4,
.vsync_end = 1280 + 4 + 8,
.vtotal = 1280 + 4 + 8 + 4,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc friendlyarm_hd702e = {
.modes = &friendlyarm_hd702e_mode,
.num_modes = 1,
.size = {
.width = 94,
.height = 151,
},
};
static const struct drm_display_mode giantplus_gpg482739qs5_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 5,
.hsync_end = 480 + 5 + 1,
.htotal = 480 + 5 + 1 + 40,
.vdisplay = 272,
.vsync_start = 272 + 8,
.vsync_end = 272 + 8 + 1,
.vtotal = 272 + 8 + 1 + 8,
.vrefresh = 60,
};
static const struct panel_desc giantplus_gpg482739qs5 = {
.modes = &giantplus_gpg482739qs5_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct display_timing giantplus_gpm940b0_timing = {
.pixelclock = { 13500000, 27000000, 27500000 },
.hactive = { 320, 320, 320 },
.hfront_porch = { 14, 686, 718 },
.hback_porch = { 50, 70, 255 },
.hsync_len = { 1, 1, 1 },
.vactive = { 240, 240, 240 },
.vfront_porch = { 1, 1, 179 },
.vback_porch = { 1, 21, 31 },
.vsync_len = { 1, 1, 6 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
static const struct panel_desc giantplus_gpm940b0 = {
.timings = &giantplus_gpm940b0_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 60,
.height = 45,
},
.bus_format = MEDIA_BUS_FMT_RGB888_3X8,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
};
static const struct display_timing hannstar_hsd070pww1_timing = {
.pixelclock = { 64300000, 71100000, 82000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 1, 1, 10 },
.hback_porch = { 1, 1, 10 },
/*
* According to the data sheet, the minimum horizontal blanking interval
* is 54 clocks (1 + 52 + 1), but tests with a Nitrogen6X have shown the
* minimum working horizontal blanking interval to be 60 clocks.
*/
.hsync_len = { 58, 158, 661 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 1, 1, 10 },
.vback_porch = { 1, 1, 10 },
.vsync_len = { 1, 21, 203 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc hannstar_hsd070pww1 = {
.timings = &hannstar_hsd070pww1_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 151,
.height = 94,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing hannstar_hsd100pxn1_timing = {
.pixelclock = { 55000000, 65000000, 75000000 },
.hactive = { 1024, 1024, 1024 },
.hfront_porch = { 40, 40, 40 },
.hback_porch = { 220, 220, 220 },
.hsync_len = { 20, 60, 100 },
.vactive = { 768, 768, 768 },
.vfront_porch = { 7, 7, 7 },
.vback_porch = { 21, 21, 21 },
.vsync_len = { 10, 10, 10 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc hannstar_hsd100pxn1 = {
.timings = &hannstar_hsd100pxn1_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 203,
.height = 152,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 85,
.hsync_end = 800 + 85 + 86,
.htotal = 800 + 85 + 86 + 85,
.vdisplay = 480,
.vsync_start = 480 + 16,
.vsync_end = 480 + 16 + 13,
.vtotal = 480 + 16 + 13 + 16,
.vrefresh = 60,
};
static const struct panel_desc hitachi_tx23d38vm0caa = {
.modes = &hitachi_tx23d38vm0caa_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 195,
.height = 117,
},
.delay = {
.enable = 160,
.disable = 160,
},
};
static const struct drm_display_mode innolux_at043tn24_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 10,
.vtotal = 272 + 2 + 10 + 2,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc innolux_at043tn24 = {
.modes = &innolux_at043tn24_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode innolux_at070tn92_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 210,
.hsync_end = 800 + 210 + 20,
.htotal = 800 + 210 + 20 + 46,
.vdisplay = 480,
.vsync_start = 480 + 22,
.vsync_end = 480 + 22 + 10,
.vtotal = 480 + 22 + 23 + 10,
.vrefresh = 60,
};
static const struct panel_desc innolux_at070tn92 = {
.modes = &innolux_at070tn92_mode,
.num_modes = 1,
.size = {
.width = 154,
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct display_timing innolux_g070y2_l01_timing = {
.pixelclock = { 28000000, 29500000, 32000000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 61, 91, 141 },
.hback_porch = { 60, 90, 140 },
.hsync_len = { 12, 12, 12 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 4, 9, 30 },
.vback_porch = { 4, 8, 28 },
.vsync_len = { 2, 2, 2 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc innolux_g070y2_l01 = {
.timings = &innolux_g070y2_l01_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.delay = {
.prepare = 10,
.enable = 100,
.disable = 100,
.unprepare = 800,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing innolux_g101ice_l01_timing = {
.pixelclock = { 60400000, 71100000, 74700000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 41, 80, 100 },
.hback_porch = { 40, 79, 99 },
.hsync_len = { 1, 1, 1 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 5, 11, 14 },
.vback_porch = { 4, 11, 14 },
.vsync_len = { 1, 1, 1 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc innolux_g101ice_l01 = {
.timings = &innolux_g101ice_l01_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 217,
.height = 135,
},
.delay = {
.enable = 200,
.disable = 200,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing innolux_g121i1_l01_timing = {
.pixelclock = { 67450000, 71000000, 74550000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 40, 80, 160 },
.hback_porch = { 39, 79, 159 },
.hsync_len = { 1, 1, 1 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 5, 11, 100 },
.vback_porch = { 4, 11, 99 },
.vsync_len = { 1, 1, 1 },
};
static const struct panel_desc innolux_g121i1_l01 = {
.timings = &innolux_g121i1_l01_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 261,
.height = 163,
},
.delay = {
.enable = 200,
.disable = 20,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode innolux_g121x1_l03_mode = {
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1024 + 0,
.hsync_end = 1024 + 1,
.htotal = 1024 + 0 + 1 + 320,
.vdisplay = 768,
.vsync_start = 768 + 38,
.vsync_end = 768 + 38 + 1,
.vtotal = 768 + 38 + 1 + 0,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc innolux_g121x1_l03 = {
.modes = &innolux_g121x1_l03_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 246,
.height = 185,
},
.delay = {
.enable = 200,
.unprepare = 200,
.disable = 400,
},
};
drm/panel: simple: Use display_timing for Innolux n116bge Convert the Innolux n116bge from using a fixed mode to specifying a display timing with min/typ/max values. Note that the n116bge's datasheet doesn't fit too well into DRM's way of specifying things. Specifically the panel's datasheet just specifies the vertical blanking period and horizontal blanking period and doesn't break things out. For now we'll leave everything as a fixed value but just allow adjusting the pixel clock. I've added a comment on what the datasheet claims so someone could later expand things to fit their needs if they wanted to test other blanking periods. The goal here is to be able to specify the panel timings in the device tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These Chromebooks have all been running in the downstream kernel with the standard porches and sync lengths but just with a slightly slower pixel clock because the 76.42 MHz clock is not achievable from the fixed PLL that was available. These Chromebooks only achieve a refresh rate of ~58 Hz. While it's probable that we could adjust the timings to achieve 60 Hz it's probably wisest to match what's been running on these devices all these years. I'll note that though the upstream kernel has always tried to achieve 76.42 MHz, it has actually been running at 74.25 MHz also since the video processor is parented off the same fixed PLL. Changes in v4: - display_timing for Innolux n116bge new for v4. Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-3-dianders@chromium.org
2019-07-12 03:34:54 +07:00
/*
* Datasheet specifies that at 60 Hz refresh rate:
* - total horizontal time: { 1506, 1592, 1716 }
* - total vertical time: { 788, 800, 868 }
*
* ...but doesn't go into exactly how that should be split into a front
* porch, back porch, or sync length. For now we'll leave a single setting
* here which allows a bit of tweaking of the pixel clock at the expense of
* refresh rate.
*/
static const struct display_timing innolux_n116bge_timing = {
.pixelclock = { 72600000, 76420000, 80240000 },
.hactive = { 1366, 1366, 1366 },
.hfront_porch = { 136, 136, 136 },
.hback_porch = { 60, 60, 60 },
.hsync_len = { 30, 30, 30 },
.vactive = { 768, 768, 768 },
.vfront_porch = { 8, 8, 8 },
.vback_porch = { 12, 12, 12 },
.vsync_len = { 12, 12, 12 },
.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
};
static const struct panel_desc innolux_n116bge = {
drm/panel: simple: Use display_timing for Innolux n116bge Convert the Innolux n116bge from using a fixed mode to specifying a display timing with min/typ/max values. Note that the n116bge's datasheet doesn't fit too well into DRM's way of specifying things. Specifically the panel's datasheet just specifies the vertical blanking period and horizontal blanking period and doesn't break things out. For now we'll leave everything as a fixed value but just allow adjusting the pixel clock. I've added a comment on what the datasheet claims so someone could later expand things to fit their needs if they wanted to test other blanking periods. The goal here is to be able to specify the panel timings in the device tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These Chromebooks have all been running in the downstream kernel with the standard porches and sync lengths but just with a slightly slower pixel clock because the 76.42 MHz clock is not achievable from the fixed PLL that was available. These Chromebooks only achieve a refresh rate of ~58 Hz. While it's probable that we could adjust the timings to achieve 60 Hz it's probably wisest to match what's been running on these devices all these years. I'll note that though the upstream kernel has always tried to achieve 76.42 MHz, it has actually been running at 74.25 MHz also since the video processor is parented off the same fixed PLL. Changes in v4: - display_timing for Innolux n116bge new for v4. Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-3-dianders@chromium.org
2019-07-12 03:34:54 +07:00
.timings = &innolux_n116bge_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 256,
.height = 144,
},
};
static const struct drm_display_mode innolux_n156bge_l21_mode = {
.clock = 69300,
.hdisplay = 1366,
.hsync_start = 1366 + 16,
.hsync_end = 1366 + 16 + 34,
.htotal = 1366 + 16 + 34 + 50,
.vdisplay = 768,
.vsync_start = 768 + 2,
.vsync_end = 768 + 2 + 6,
.vtotal = 768 + 2 + 6 + 12,
.vrefresh = 60,
};
static const struct panel_desc innolux_n156bge_l21 = {
.modes = &innolux_n156bge_l21_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 344,
.height = 193,
},
};
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org
2018-10-26 05:21:34 +07:00
static const struct drm_display_mode innolux_p120zdg_bf1_mode = {
.clock = 206016,
.hdisplay = 2160,
.hsync_start = 2160 + 48,
.hsync_end = 2160 + 48 + 32,
.htotal = 2160 + 48 + 32 + 80,
.vdisplay = 1440,
.vsync_start = 1440 + 3,
.vsync_end = 1440 + 3 + 10,
.vtotal = 1440 + 3 + 10 + 27,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org
2018-10-26 05:21:34 +07:00
static const struct panel_desc innolux_p120zdg_bf1 = {
.modes = &innolux_p120zdg_bf1_mode,
.num_modes = 1,
.bpc = 8,
.size = {
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org
2018-10-26 05:21:34 +07:00
.width = 254,
.height = 169,
},
.delay = {
.hpd_absent_delay = 200,
.unprepare = 500,
},
};
static const struct drm_display_mode innolux_zj070na_01p_mode = {
.clock = 51501,
.hdisplay = 1024,
.hsync_start = 1024 + 128,
.hsync_end = 1024 + 128 + 64,
.htotal = 1024 + 128 + 64 + 128,
.vdisplay = 600,
.vsync_start = 600 + 16,
.vsync_end = 600 + 16 + 4,
.vtotal = 600 + 16 + 4 + 16,
.vrefresh = 60,
};
static const struct panel_desc innolux_zj070na_01p = {
.modes = &innolux_zj070na_01p_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 90,
},
};
static const struct display_timing koe_tx14d24vm1bpa_timing = {
.pixelclock = { 5580000, 5850000, 6200000 },
.hactive = { 320, 320, 320 },
.hfront_porch = { 30, 30, 30 },
.hback_porch = { 30, 30, 30 },
.hsync_len = { 1, 5, 17 },
.vactive = { 240, 240, 240 },
.vfront_porch = { 6, 6, 6 },
.vback_porch = { 5, 5, 5 },
.vsync_len = { 1, 2, 11 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc koe_tx14d24vm1bpa = {
.timings = &koe_tx14d24vm1bpa_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 115,
.height = 86,
},
};
static const struct display_timing koe_tx31d200vm0baa_timing = {
.pixelclock = { 39600000, 43200000, 48000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 16, 36, 56 },
.hback_porch = { 16, 36, 56 },
.hsync_len = { 8, 8, 8 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 6, 21, 33 },
.vback_porch = { 6, 21, 33 },
.vsync_len = { 8, 8, 8 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc koe_tx31d200vm0baa = {
.timings = &koe_tx31d200vm0baa_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 292,
.height = 109,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing kyo_tcg121xglp_timing = {
.pixelclock = { 52000000, 65000000, 71000000 },
.hactive = { 1024, 1024, 1024 },
.hfront_porch = { 2, 2, 2 },
.hback_porch = { 2, 2, 2 },
.hsync_len = { 86, 124, 244 },
.vactive = { 768, 768, 768 },
.vfront_porch = { 2, 2, 2 },
.vback_porch = { 2, 2, 2 },
.vsync_len = { 6, 34, 73 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc kyo_tcg121xglp = {
.timings = &kyo_tcg121xglp_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 246,
.height = 184,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode lemaker_bl035_rgb_002_mode = {
.clock = 7000,
.hdisplay = 320,
.hsync_start = 320 + 20,
.hsync_end = 320 + 20 + 30,
.htotal = 320 + 20 + 30 + 38,
.vdisplay = 240,
.vsync_start = 240 + 4,
.vsync_end = 240 + 4 + 3,
.vtotal = 240 + 4 + 3 + 15,
.vrefresh = 60,
};
static const struct panel_desc lemaker_bl035_rgb_002 = {
.modes = &lemaker_bl035_rgb_002_mode,
.num_modes = 1,
.size = {
.width = 70,
.height = 52,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_LOW,
};
static const struct drm_display_mode lg_lb070wv8_mode = {
.clock = 33246,
.hdisplay = 800,
.hsync_start = 800 + 88,
.hsync_end = 800 + 88 + 80,
.htotal = 800 + 88 + 80 + 88,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 25,
.vtotal = 480 + 10 + 25 + 10,
.vrefresh = 60,
};
static const struct panel_desc lg_lb070wv8 = {
.modes = &lg_lb070wv8_mode,
.num_modes = 1,
.bpc = 16,
.size = {
.width = 151,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode lg_lp079qx1_sp0v_mode = {
.clock = 200000,
.hdisplay = 1536,
.hsync_start = 1536 + 12,
.hsync_end = 1536 + 12 + 16,
.htotal = 1536 + 12 + 16 + 48,
.vdisplay = 2048,
.vsync_start = 2048 + 8,
.vsync_end = 2048 + 8 + 4,
.vtotal = 2048 + 8 + 4 + 8,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc lg_lp079qx1_sp0v = {
.modes = &lg_lp079qx1_sp0v_mode,
.num_modes = 1,
.size = {
.width = 129,
.height = 171,
},
};
static const struct drm_display_mode lg_lp097qx1_spa1_mode = {
.clock = 205210,
.hdisplay = 2048,
.hsync_start = 2048 + 150,
.hsync_end = 2048 + 150 + 5,
.htotal = 2048 + 150 + 5 + 5,
.vdisplay = 1536,
.vsync_start = 1536 + 3,
.vsync_end = 1536 + 3 + 1,
.vtotal = 1536 + 3 + 1 + 9,
.vrefresh = 60,
};
static const struct panel_desc lg_lp097qx1_spa1 = {
.modes = &lg_lp097qx1_spa1_mode,
.num_modes = 1,
.size = {
.width = 208,
.height = 147,
},
};
static const struct drm_display_mode lg_lp120up1_mode = {
.clock = 162300,
.hdisplay = 1920,
.hsync_start = 1920 + 40,
.hsync_end = 1920 + 40 + 40,
.htotal = 1920 + 40 + 40+ 80,
.vdisplay = 1280,
.vsync_start = 1280 + 4,
.vsync_end = 1280 + 4 + 4,
.vtotal = 1280 + 4 + 4 + 12,
.vrefresh = 60,
};
static const struct panel_desc lg_lp120up1 = {
.modes = &lg_lp120up1_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 267,
.height = 183,
},
};
static const struct drm_display_mode lg_lp129qe_mode = {
.clock = 285250,
.hdisplay = 2560,
.hsync_start = 2560 + 48,
.hsync_end = 2560 + 48 + 32,
.htotal = 2560 + 48 + 32 + 80,
.vdisplay = 1700,
.vsync_start = 1700 + 3,
.vsync_end = 1700 + 3 + 10,
.vtotal = 1700 + 3 + 10 + 36,
.vrefresh = 60,
};
static const struct panel_desc lg_lp129qe = {
.modes = &lg_lp129qe_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 272,
.height = 181,
},
};
static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
.clock = 30400,
.hdisplay = 800,
.hsync_start = 800 + 0,
.hsync_end = 800 + 1,
.htotal = 800 + 0 + 1 + 160,
.vdisplay = 480,
.vsync_start = 480 + 0,
.vsync_end = 480 + 48 + 1,
.vtotal = 480 + 48 + 1 + 0,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc mitsubishi_aa070mc01 = {
.modes = &mitsubishi_aa070mc01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 152,
.height = 91,
},
.delay = {
.enable = 200,
.unprepare = 200,
.disable = 400,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
.bus_flags = DRM_BUS_FLAG_DE_HIGH,
};
static const struct display_timing nec_nl12880bc20_05_timing = {
.pixelclock = { 67000000, 71000000, 75000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 2, 30, 30 },
.hback_porch = { 6, 100, 100 },
.hsync_len = { 2, 30, 30 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 5, 5, 5 },
.vback_porch = { 11, 11, 11 },
.vsync_len = { 7, 7, 7 },
};
static const struct panel_desc nec_nl12880bc20_05 = {
.timings = &nec_nl12880bc20_05_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 261,
.height = 163,
},
.delay = {
.enable = 50,
.disable = 50,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
.clock = 10870,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 4,
.vtotal = 272 + 2 + 4 + 2,
.vrefresh = 74,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc nec_nl4827hc19_05b = {
.modes = &nec_nl4827hc19_05b_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode netron_dy_e231732_mode = {
.clock = 66000,
.hdisplay = 1024,
.hsync_start = 1024 + 160,
.hsync_end = 1024 + 160 + 70,
.htotal = 1024 + 160 + 70 + 90,
.vdisplay = 600,
.vsync_start = 600 + 127,
.vsync_end = 600 + 127 + 20,
.vtotal = 600 + 127 + 20 + 3,
.vrefresh = 60,
};
static const struct panel_desc netron_dy_e231732 = {
.modes = &netron_dy_e231732_mode,
.num_modes = 1,
.size = {
.width = 154,
.height = 87,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode newhaven_nhd_43_480272ef_atxl_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 10,
.vtotal = 272 + 2 + 10 + 2,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc newhaven_nhd_43_480272ef_atxl = {
.modes = &newhaven_nhd_43_480272ef_atxl_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
};
static const struct display_timing nlt_nl192108ac18_02d_timing = {
.pixelclock = { 130000000, 148350000, 163000000 },
.hactive = { 1920, 1920, 1920 },
.hfront_porch = { 80, 100, 100 },
.hback_porch = { 100, 120, 120 },
.hsync_len = { 50, 60, 60 },
.vactive = { 1080, 1080, 1080 },
.vfront_porch = { 12, 30, 30 },
.vback_porch = { 4, 10, 10 },
.vsync_len = { 4, 5, 5 },
};
static const struct panel_desc nlt_nl192108ac18_02d = {
.timings = &nlt_nl192108ac18_02d_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 344,
.height = 194,
},
.delay = {
.unprepare = 500,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode nvd_9128_mode = {
.clock = 29500,
.hdisplay = 800,
.hsync_start = 800 + 130,
.hsync_end = 800 + 130 + 98,
.htotal = 800 + 0 + 130 + 98,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 50,
.vtotal = 480 + 0 + 10 + 50,
};
static const struct panel_desc nvd_9128 = {
.modes = &nvd_9128_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 156,
.height = 88,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing okaya_rs800480t_7x0gp_timing = {
.pixelclock = { 30000000, 30000000, 40000000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 40, 40, 40 },
.hback_porch = { 40, 40, 40 },
.hsync_len = { 1, 48, 48 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 13, 13, 13 },
.vback_porch = { 29, 29, 29 },
.vsync_len = { 3, 3, 3 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc okaya_rs800480t_7x0gp = {
.timings = &okaya_rs800480t_7x0gp_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 87,
},
.delay = {
.prepare = 41,
.enable = 50,
.unprepare = 41,
.disable = 50,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode olimex_lcd_olinuxino_43ts_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 5,
.hsync_end = 480 + 5 + 30,
.htotal = 480 + 5 + 30 + 10,
.vdisplay = 272,
.vsync_start = 272 + 8,
.vsync_end = 272 + 8 + 5,
.vtotal = 272 + 8 + 5 + 3,
.vrefresh = 60,
};
static const struct panel_desc olimex_lcd_olinuxino_43ts = {
.modes = &olimex_lcd_olinuxino_43ts_mode,
.num_modes = 1,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
/*
* 800x480 CVT. The panel appears to be quite accepting, at least as far as
* pixel clocks, but this is the timing that was being used in the Adafruit
* installation instructions.
*/
static const struct drm_display_mode ontat_yx700wv03_mode = {
.clock = 29500,
.hdisplay = 800,
.hsync_start = 824,
.hsync_end = 896,
.htotal = 992,
.vdisplay = 480,
.vsync_start = 483,
.vsync_end = 493,
.vtotal = 500,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
/*
* Specification at:
* https://www.adafruit.com/images/product-files/2406/c3163.pdf
*/
static const struct panel_desc ontat_yx700wv03 = {
.modes = &ontat_yx700wv03_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 154,
.height = 83,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode ortustech_com37h3m_mode = {
.clock = 22153,
.hdisplay = 480,
.hsync_start = 480 + 8,
.hsync_end = 480 + 8 + 10,
.htotal = 480 + 8 + 10 + 10,
.vdisplay = 640,
.vsync_start = 640 + 4,
.vsync_end = 640 + 4 + 3,
.vtotal = 640 + 4 + 3 + 4,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc ortustech_com37h3m = {
.modes = &ortustech_com37h3m_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 56, /* 56.16mm */
.height = 75, /* 74.88mm */
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
};
static const struct drm_display_mode ortustech_com43h4m85ulc_mode = {
.clock = 25000,
.hdisplay = 480,
.hsync_start = 480 + 10,
.hsync_end = 480 + 10 + 10,
.htotal = 480 + 10 + 10 + 15,
.vdisplay = 800,
.vsync_start = 800 + 3,
.vsync_end = 800 + 3 + 3,
.vtotal = 800 + 3 + 3 + 3,
.vrefresh = 60,
};
static const struct panel_desc ortustech_com43h4m85ulc = {
.modes = &ortustech_com43h4m85ulc_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 56,
.height = 93,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode osddisplays_osd070t1718_19ts_mode = {
.clock = 33000,
.hdisplay = 800,
.hsync_start = 800 + 210,
.hsync_end = 800 + 210 + 30,
.htotal = 800 + 210 + 30 + 16,
.vdisplay = 480,
.vsync_start = 480 + 22,
.vsync_end = 480 + 22 + 13,
.vtotal = 480 + 22 + 13 + 10,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc osddisplays_osd070t1718_19ts = {
.modes = &osddisplays_osd070t1718_19ts_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct drm_display_mode pda_91_00156_a0_mode = {
.clock = 33300,
.hdisplay = 800,
.hsync_start = 800 + 1,
.hsync_end = 800 + 1 + 64,
.htotal = 800 + 1 + 64 + 64,
.vdisplay = 480,
.vsync_start = 480 + 1,
.vsync_end = 480 + 1 + 23,
.vtotal = 480 + 1 + 23 + 22,
.vrefresh = 60,
};
static const struct panel_desc pda_91_00156_a0 = {
.modes = &pda_91_00156_a0_mode,
.num_modes = 1,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode qd43003c0_40_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 8,
.hsync_end = 480 + 8 + 4,
.htotal = 480 + 8 + 4 + 39,
.vdisplay = 272,
.vsync_start = 272 + 4,
.vsync_end = 272 + 4 + 10,
.vtotal = 272 + 4 + 10 + 2,
.vrefresh = 60,
};
static const struct panel_desc qd43003c0_40 = {
.modes = &qd43003c0_40_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 53,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct display_timing rocktech_rk070er9427_timing = {
.pixelclock = { 26400000, 33300000, 46800000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 16, 210, 354 },
.hback_porch = { 46, 46, 46 },
.hsync_len = { 1, 1, 1 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 7, 22, 147 },
.vback_porch = { 23, 23, 23 },
.vsync_len = { 1, 1, 1 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc rocktech_rk070er9427 = {
.timings = &rocktech_rk070er9427_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 154,
.height = 86,
},
.delay = {
.prepare = 41,
.enable = 50,
.unprepare = 41,
.disable = 50,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
.clock = 271560,
.hdisplay = 2560,
.hsync_start = 2560 + 48,
.hsync_end = 2560 + 48 + 32,
.htotal = 2560 + 48 + 32 + 80,
.vdisplay = 1600,
.vsync_start = 1600 + 2,
.vsync_end = 1600 + 2 + 5,
.vtotal = 1600 + 2 + 5 + 57,
.vrefresh = 60,
};
static const struct panel_desc samsung_lsn122dl01_c01 = {
.modes = &samsung_lsn122dl01_c01_mode,
.num_modes = 1,
.size = {
.width = 263,
.height = 164,
},
};
static const struct drm_display_mode samsung_ltn101nt05_mode = {
.clock = 54030,
.hdisplay = 1024,
.hsync_start = 1024 + 24,
.hsync_end = 1024 + 24 + 136,
.htotal = 1024 + 24 + 136 + 160,
.vdisplay = 600,
.vsync_start = 600 + 3,
.vsync_end = 600 + 3 + 6,
.vtotal = 600 + 3 + 6 + 61,
.vrefresh = 60,
};
static const struct panel_desc samsung_ltn101nt05 = {
.modes = &samsung_ltn101nt05_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 223,
.height = 125,
},
};
static const struct drm_display_mode samsung_ltn140at29_301_mode = {
.clock = 76300,
.hdisplay = 1366,
.hsync_start = 1366 + 64,
.hsync_end = 1366 + 64 + 48,
.htotal = 1366 + 64 + 48 + 128,
.vdisplay = 768,
.vsync_start = 768 + 2,
.vsync_end = 768 + 2 + 5,
.vtotal = 768 + 2 + 5 + 17,
.vrefresh = 60,
};
static const struct panel_desc samsung_ltn140at29_301 = {
.modes = &samsung_ltn140at29_301_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 320,
.height = 187,
},
};
static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
.clock = 168480,
.hdisplay = 1920,
.hsync_start = 1920 + 48,
.hsync_end = 1920 + 48 + 32,
.htotal = 1920 + 48 + 32 + 80,
.vdisplay = 1280,
.vsync_start = 1280 + 3,
.vsync_end = 1280 + 3 + 10,
.vtotal = 1280 + 3 + 10 + 57,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
static const struct panel_desc sharp_ld_d5116z01b = {
.modes = &sharp_ld_d5116z01b_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 260,
.height = 120,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
};
static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
.clock = 33260,
.hdisplay = 800,
.hsync_start = 800 + 64,
.hsync_end = 800 + 64 + 128,
.htotal = 800 + 64 + 128 + 64,
.vdisplay = 480,
.vsync_start = 480 + 8,
.vsync_end = 480 + 8 + 2,
.vtotal = 480 + 8 + 2 + 35,
.vrefresh = 60,
.flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static const struct panel_desc sharp_lq070y3dg3b = {
.modes = &sharp_lq070y3dg3b_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 152, /* 152.4mm */
.height = 91, /* 91.4mm */
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
};
static const struct drm_display_mode sharp_lq035q7db03_mode = {
.clock = 5500,
.hdisplay = 240,
.hsync_start = 240 + 16,
.hsync_end = 240 + 16 + 7,
.htotal = 240 + 16 + 7 + 5,
.vdisplay = 320,
.vsync_start = 320 + 9,
.vsync_end = 320 + 9 + 1,
.vtotal = 320 + 9 + 1 + 7,
.vrefresh = 60,
};
static const struct panel_desc sharp_lq035q7db03 = {
.modes = &sharp_lq035q7db03_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 54,
.height = 72,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct display_timing sharp_lq101k1ly04_timing = {
.pixelclock = { 60000000, 65000000, 80000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 20, 20, 20 },
.hback_porch = { 20, 20, 20 },
.hsync_len = { 10, 10, 10 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 4, 4, 4 },
.vback_porch = { 4, 4, 4 },
.vsync_len = { 4, 4, 4 },
.flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static const struct panel_desc sharp_lq101k1ly04 = {
.timings = &sharp_lq101k1ly04_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 217,
.height = 136,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing sharp_lq123p1jx31_timing = {
.pixelclock = { 252750000, 252750000, 266604720 },
.hactive = { 2400, 2400, 2400 },
.hfront_porch = { 48, 48, 48 },
.hback_porch = { 80, 80, 84 },
.hsync_len = { 32, 32, 32 },
.vactive = { 1600, 1600, 1600 },
.vfront_porch = { 3, 3, 3 },
.vback_porch = { 33, 33, 120 },
.vsync_len = { 10, 10, 10 },
.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
};
static const struct panel_desc sharp_lq123p1jx31 = {
.timings = &sharp_lq123p1jx31_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 259,
.height = 173,
},
.delay = {
.prepare = 110,
.enable = 50,
.unprepare = 550,
},
};
static const struct drm_display_mode sharp_lq150x1lg11_mode = {
.clock = 71100,
.hdisplay = 1024,
.hsync_start = 1024 + 168,
.hsync_end = 1024 + 168 + 64,
.htotal = 1024 + 168 + 64 + 88,
.vdisplay = 768,
.vsync_start = 768 + 37,
.vsync_end = 768 + 37 + 2,
.vtotal = 768 + 37 + 2 + 8,
.vrefresh = 60,
};
static const struct panel_desc sharp_lq150x1lg11 = {
.modes = &sharp_lq150x1lg11_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 304,
.height = 228,
},
.bus_format = MEDIA_BUS_FMT_RGB565_1X16,
};
static const struct display_timing sharp_ls020b1dd01d_timing = {
.pixelclock = { 2000000, 4200000, 5000000 },
.hactive = { 240, 240, 240 },
.hfront_porch = { 66, 66, 66 },
.hback_porch = { 1, 1, 1 },
.hsync_len = { 1, 1, 1 },
.vactive = { 160, 160, 160 },
.vfront_porch = { 52, 52, 52 },
.vback_porch = { 6, 6, 6 },
.vsync_len = { 10, 10, 10 },
.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_LOW,
};
static const struct panel_desc sharp_ls020b1dd01d = {
.timings = &sharp_ls020b1dd01d_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 42,
.height = 28,
},
.bus_format = MEDIA_BUS_FMT_RGB565_1X16,
.bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_PIXDATA_NEGEDGE
| DRM_BUS_FLAG_SHARP_SIGNALS,
};
static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
.clock = 33300,
.hdisplay = 800,
.hsync_start = 800 + 1,
.hsync_end = 800 + 1 + 64,
.htotal = 800 + 1 + 64 + 64,
.vdisplay = 480,
.vsync_start = 480 + 1,
.vsync_end = 480 + 1 + 23,
.vtotal = 480 + 1 + 23 + 22,
.vrefresh = 60,
};
static const struct panel_desc shelly_sca07010_bfn_lnn = {
.modes = &shelly_sca07010_bfn_lnn_mode,
.num_modes = 1,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode starry_kr122ea0sra_mode = {
.clock = 147000,
.hdisplay = 1920,
.hsync_start = 1920 + 16,
.hsync_end = 1920 + 16 + 16,
.htotal = 1920 + 16 + 16 + 32,
.vdisplay = 1200,
.vsync_start = 1200 + 15,
.vsync_end = 1200 + 15 + 2,
.vtotal = 1200 + 15 + 2 + 18,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc starry_kr122ea0sra = {
.modes = &starry_kr122ea0sra_mode,
.num_modes = 1,
.size = {
.width = 263,
.height = 164,
},
.delay = {
.prepare = 10 + 200,
.enable = 50,
.unprepare = 10 + 500,
},
};
static const struct drm_display_mode tfc_s9700rtwv43tr_01b_mode = {
.clock = 30000,
.hdisplay = 800,
.hsync_start = 800 + 39,
.hsync_end = 800 + 39 + 47,
.htotal = 800 + 39 + 47 + 39,
.vdisplay = 480,
.vsync_start = 480 + 13,
.vsync_end = 480 + 13 + 2,
.vtotal = 480 + 13 + 2 + 29,
.vrefresh = 62,
};
static const struct panel_desc tfc_s9700rtwv43tr_01b = {
.modes = &tfc_s9700rtwv43tr_01b_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 155,
.height = 90,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
static const struct display_timing tianma_tm070jdhg30_timing = {
.pixelclock = { 62600000, 68200000, 78100000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 15, 64, 159 },
.hback_porch = { 5, 5, 5 },
.hsync_len = { 1, 1, 256 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 3, 40, 99 },
.vback_porch = { 2, 2, 2 },
.vsync_len = { 1, 1, 128 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc tianma_tm070jdhg30 = {
.timings = &tianma_tm070jdhg30_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 151,
.height = 95,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing tianma_tm070rvhg71_timing = {
.pixelclock = { 27700000, 29200000, 39600000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 12, 40, 212 },
.hback_porch = { 88, 88, 88 },
.hsync_len = { 1, 1, 40 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 1, 13, 88 },
.vback_porch = { 32, 32, 32 },
.vsync_len = { 1, 1, 3 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc tianma_tm070rvhg71 = {
.timings = &tianma_tm070rvhg71_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 154,
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode ti_nspire_cx_lcd_mode[] = {
{
.clock = 10000,
.hdisplay = 320,
.hsync_start = 320 + 50,
.hsync_end = 320 + 50 + 6,
.htotal = 320 + 50 + 6 + 38,
.vdisplay = 240,
.vsync_start = 240 + 3,
.vsync_end = 240 + 3 + 1,
.vtotal = 240 + 3 + 1 + 17,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
},
};
static const struct panel_desc ti_nspire_cx_lcd_panel = {
.modes = ti_nspire_cx_lcd_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 65,
.height = 49,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
};
static const struct drm_display_mode ti_nspire_classic_lcd_mode[] = {
{
.clock = 10000,
.hdisplay = 320,
.hsync_start = 320 + 6,
.hsync_end = 320 + 6 + 6,
.htotal = 320 + 6 + 6 + 6,
.vdisplay = 240,
.vsync_start = 240 + 0,
.vsync_end = 240 + 0 + 1,
.vtotal = 240 + 0 + 1 + 0,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
},
};
static const struct panel_desc ti_nspire_classic_lcd_panel = {
.modes = ti_nspire_classic_lcd_mode,
.num_modes = 1,
/* The grayscale panel has 8 bit for the color .. Y (black) */
.bpc = 8,
.size = {
.width = 71,
.height = 53,
},
/* This is the grayscale bus format */
.bus_format = MEDIA_BUS_FMT_Y8_1X8,
.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
static const struct drm_display_mode toshiba_lt089ac29000_mode = {
.clock = 79500,
.hdisplay = 1280,
.hsync_start = 1280 + 192,
.hsync_end = 1280 + 192 + 128,
.htotal = 1280 + 192 + 128 + 64,
.vdisplay = 768,
.vsync_start = 768 + 20,
.vsync_end = 768 + 20 + 7,
.vtotal = 768 + 20 + 7 + 3,
.vrefresh = 60,
};
static const struct panel_desc toshiba_lt089ac29000 = {
.modes = &toshiba_lt089ac29000_mode,
.num_modes = 1,
.size = {
.width = 194,
.height = 116,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode tpk_f07a_0102_mode = {
.clock = 33260,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 128,
.htotal = 800 + 40 + 128 + 88,
.vdisplay = 480,
.vsync_start = 480 + 10,
.vsync_end = 480 + 10 + 2,
.vtotal = 480 + 10 + 2 + 33,
.vrefresh = 60,
};
static const struct panel_desc tpk_f07a_0102 = {
.modes = &tpk_f07a_0102_mode,
.num_modes = 1,
.size = {
.width = 152,
.height = 91,
},
.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode tpk_f10a_0102_mode = {
.clock = 45000,
.hdisplay = 1024,
.hsync_start = 1024 + 176,
.hsync_end = 1024 + 176 + 5,
.htotal = 1024 + 176 + 5 + 88,
.vdisplay = 600,
.vsync_start = 600 + 20,
.vsync_end = 600 + 20 + 5,
.vtotal = 600 + 20 + 5 + 25,
.vrefresh = 60,
};
static const struct panel_desc tpk_f10a_0102 = {
.modes = &tpk_f10a_0102_mode,
.num_modes = 1,
.size = {
.width = 223,
.height = 125,
},
};
static const struct display_timing urt_umsh_8596md_timing = {
.pixelclock = { 33260000, 33260000, 33260000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 41, 41, 41 },
.hback_porch = { 216 - 128, 216 - 128, 216 - 128 },
.hsync_len = { 71, 128, 128 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 10, 10, 10 },
.vback_porch = { 35 - 2, 35 - 2, 35 - 2 },
.vsync_len = { 2, 2, 2 },
.flags = DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE |
DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
static const struct panel_desc urt_umsh_8596md_lvds = {
.timings = &urt_umsh_8596md_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct panel_desc urt_umsh_8596md_parallel = {
.timings = &urt_umsh_8596md_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode vl050_8048nt_c01_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 210,
.hsync_end = 800 + 210 + 20,
.htotal = 800 + 210 + 20 + 46,
.vdisplay = 480,
.vsync_start = 480 + 22,
.vsync_end = 480 + 22 + 10,
.vtotal = 480 + 22 + 10 + 23,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc vl050_8048nt_c01 = {
.modes = &vl050_8048nt_c01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 120,
.height = 76,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
static const struct drm_display_mode winstar_wf35ltiacd_mode = {
.clock = 6410,
.hdisplay = 320,
.hsync_start = 320 + 20,
.hsync_end = 320 + 20 + 30,
.htotal = 320 + 20 + 30 + 38,
.vdisplay = 240,
.vsync_start = 240 + 4,
.vsync_end = 240 + 4 + 3,
.vtotal = 240 + 4 + 3 + 15,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc winstar_wf35ltiacd = {
.modes = &winstar_wf35ltiacd_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 70,
.height = 53,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode arm_rtsm_mode[] = {
{
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1024 + 24,
.hsync_end = 1024 + 24 + 136,
.htotal = 1024 + 24 + 136 + 160,
.vdisplay = 768,
.vsync_start = 768 + 3,
.vsync_end = 768 + 3 + 6,
.vtotal = 768 + 3 + 6 + 29,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
},
};
static const struct panel_desc arm_rtsm = {
.modes = arm_rtsm_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 400,
.height = 300,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct of_device_id platform_of_match[] = {
{
.compatible = "ampire,am-480272h3tmqw-t01h",
.data = &ampire_am_480272h3tmqw_t01h,
}, {
.compatible = "ampire,am800480r3tmqwa1h",
.data = &ampire_am800480r3tmqwa1h,
}, {
.compatible = "arm,rtsm-display",
.data = &arm_rtsm,
}, {
.compatible = "armadeus,st0700-adapt",
.data = &armadeus_st0700_adapt,
}, {
.compatible = "auo,b101aw03",
.data = &auo_b101aw03,
}, {
.compatible = "auo,b101ean01",
.data = &auo_b101ean01,
}, {
.compatible = "auo,b101xtn01",
.data = &auo_b101xtn01,
}, {
.compatible = "auo,b116xw03",
.data = &auo_b116xw03,
}, {
.compatible = "auo,b133htn01",
.data = &auo_b133htn01,
}, {
.compatible = "auo,b133xtn01",
.data = &auo_b133xtn01,
}, {
.compatible = "auo,g070vvn01",
.data = &auo_g070vvn01,
}, {
.compatible = "auo,g101evn010",
.data = &auo_g101evn010,
}, {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
}, {
.compatible = "auo,g133han01",
.data = &auo_g133han01,
}, {
.compatible = "auo,g185han01",
.data = &auo_g185han01,
}, {
.compatible = "auo,p320hvn03",
.data = &auo_p320hvn03,
}, {
.compatible = "auo,t215hvn01",
.data = &auo_t215hvn01,
}, {
.compatible = "avic,tm070ddh03",
.data = &avic_tm070ddh03,
}, {
.compatible = "bananapi,s070wv20-ct16",
.data = &bananapi_s070wv20_ct16,
}, {
.compatible = "boe,hv070wsa-100",
.data = &boe_hv070wsa
}, {
.compatible = "boe,nv101wxmn51",
.data = &boe_nv101wxmn51,
}, {
.compatible = "cdtech,s043wq26h-ct7",
.data = &cdtech_s043wq26h_ct7,
}, {
.compatible = "cdtech,s070wv95-ct16",
.data = &cdtech_s070wv95_ct16,
}, {
.compatible = "chunghwa,claa070wp03xg",
.data = &chunghwa_claa070wp03xg,
}, {
.compatible = "chunghwa,claa101wa01a",
.data = &chunghwa_claa101wa01a
}, {
.compatible = "chunghwa,claa101wb01",
.data = &chunghwa_claa101wb01
}, {
.compatible = "dataimage,scf0700c48ggu18",
.data = &dataimage_scf0700c48ggu18,
}, {
.compatible = "dlc,dlc0700yzg-1",
.data = &dlc_dlc0700yzg_1,
}, {
.compatible = "dlc,dlc1010gig",
.data = &dlc_dlc1010gig,
}, {
.compatible = "edt,et035012dm6",
.data = &edt_et035012dm6,
}, {
.compatible = "edt,etm0430g0dh6",
.data = &edt_etm0430g0dh6,
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
}, {
.compatible = "edt,etm0700g0dh6",
.data = &edt_etm0700g0dh6,
}, {
.compatible = "edt,etm0700g0bdh6",
.data = &edt_etm0700g0bdh6,
}, {
.compatible = "edt,etm0700g0edh6",
.data = &edt_etm0700g0bdh6,
}, {
.compatible = "evervision,vgg804821",
.data = &evervision_vgg804821,
}, {
.compatible = "foxlink,fl500wvr00-a0t",
.data = &foxlink_fl500wvr00_a0t,
}, {
.compatible = "friendlyarm,hd702e",
.data = &friendlyarm_hd702e,
}, {
.compatible = "giantplus,gpg482739qs5",
.data = &giantplus_gpg482739qs5
}, {
.compatible = "giantplus,gpm940b0",
.data = &giantplus_gpm940b0,
}, {
.compatible = "hannstar,hsd070pww1",
.data = &hannstar_hsd070pww1,
}, {
.compatible = "hannstar,hsd100pxn1",
.data = &hannstar_hsd100pxn1,
}, {
.compatible = "hit,tx23d38vm0caa",
.data = &hitachi_tx23d38vm0caa
}, {
.compatible = "innolux,at043tn24",
.data = &innolux_at043tn24,
}, {
.compatible = "innolux,at070tn92",
.data = &innolux_at070tn92,
}, {
.compatible = "innolux,g070y2-l01",
.data = &innolux_g070y2_l01,
}, {
.compatible = "innolux,g101ice-l01",
.data = &innolux_g101ice_l01
}, {
.compatible = "innolux,g121i1-l01",
.data = &innolux_g121i1_l01
}, {
.compatible = "innolux,g121x1-l03",
.data = &innolux_g121x1_l03,
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
}, {
.compatible = "innolux,n156bge-l21",
.data = &innolux_n156bge_l21,
}, {
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org
2018-10-26 05:21:34 +07:00
.compatible = "innolux,p120zdg-bf1",
.data = &innolux_p120zdg_bf1,
}, {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
}, {
.compatible = "koe,tx14d24vm1bpa",
.data = &koe_tx14d24vm1bpa,
}, {
.compatible = "koe,tx31d200vm0baa",
.data = &koe_tx31d200vm0baa,
}, {
.compatible = "kyo,tcg121xglp",
.data = &kyo_tcg121xglp,
}, {
.compatible = "lemaker,bl035-rgb-002",
.data = &lemaker_bl035_rgb_002,
}, {
.compatible = "lg,lb070wv8",
.data = &lg_lb070wv8,
}, {
.compatible = "lg,lp079qx1-sp0v",
.data = &lg_lp079qx1_sp0v,
}, {
.compatible = "lg,lp097qx1-spa1",
.data = &lg_lp097qx1_spa1,
}, {
.compatible = "lg,lp120up1",
.data = &lg_lp120up1,
}, {
.compatible = "lg,lp129qe",
.data = &lg_lp129qe,
}, {
.compatible = "mitsubishi,aa070mc01-ca1",
.data = &mitsubishi_aa070mc01,
}, {
.compatible = "nec,nl12880bc20-05",
.data = &nec_nl12880bc20_05,
}, {
.compatible = "nec,nl4827hc19-05b",
.data = &nec_nl4827hc19_05b,
}, {
.compatible = "netron-dy,e231732",
.data = &netron_dy_e231732,
}, {
.compatible = "newhaven,nhd-4.3-480272ef-atxl",
.data = &newhaven_nhd_43_480272ef_atxl,
}, {
.compatible = "nlt,nl192108ac18-02d",
.data = &nlt_nl192108ac18_02d,
}, {
.compatible = "nvd,9128",
.data = &nvd_9128,
}, {
.compatible = "okaya,rs800480t-7x0gp",
.data = &okaya_rs800480t_7x0gp,
}, {
.compatible = "olimex,lcd-olinuxino-43-ts",
.data = &olimex_lcd_olinuxino_43ts,
}, {
.compatible = "ontat,yx700wv03",
.data = &ontat_yx700wv03,
}, {
.compatible = "ortustech,com37h3m05dtc",
.data = &ortustech_com37h3m,
}, {
.compatible = "ortustech,com37h3m99dtc",
.data = &ortustech_com37h3m,
}, {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
.compatible = "osddisplays,osd070t1718-19ts",
.data = &osddisplays_osd070t1718_19ts,
}, {
.compatible = "pda,91-00156-a0",
.data = &pda_91_00156_a0,
}, {
.compatible = "qiaodian,qd43003c0-40",
.data = &qd43003c0_40,
}, {
.compatible = "rocktech,rk070er9427",
.data = &rocktech_rk070er9427,
}, {
.compatible = "samsung,lsn122dl01-c01",
.data = &samsung_lsn122dl01_c01,
}, {
.compatible = "samsung,ltn101nt05",
.data = &samsung_ltn101nt05,
}, {
.compatible = "samsung,ltn140at29-301",
.data = &samsung_ltn140at29_301,
}, {
.compatible = "sharp,ld-d5116z01b",
.data = &sharp_ld_d5116z01b,
}, {
.compatible = "sharp,lq035q7db03",
.data = &sharp_lq035q7db03,
}, {
.compatible = "sharp,lq070y3dg3b",
.data = &sharp_lq070y3dg3b,
}, {
.compatible = "sharp,lq101k1ly04",
.data = &sharp_lq101k1ly04,
}, {
.compatible = "sharp,lq123p1jx31",
.data = &sharp_lq123p1jx31,
}, {
.compatible = "sharp,lq150x1lg11",
.data = &sharp_lq150x1lg11,
}, {
.compatible = "sharp,ls020b1dd01d",
.data = &sharp_ls020b1dd01d,
}, {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
.compatible = "starry,kr122ea0sra",
.data = &starry_kr122ea0sra,
}, {
.compatible = "tfc,s9700rtwv43tr-01b",
.data = &tfc_s9700rtwv43tr_01b,
}, {
.compatible = "tianma,tm070jdhg30",
.data = &tianma_tm070jdhg30,
}, {
.compatible = "tianma,tm070rvhg71",
.data = &tianma_tm070rvhg71,
}, {
.compatible = "ti,nspire-cx-lcd-panel",
.data = &ti_nspire_cx_lcd_panel,
}, {
.compatible = "ti,nspire-classic-lcd-panel",
.data = &ti_nspire_classic_lcd_panel,
}, {
.compatible = "toshiba,lt089ac29000",
.data = &toshiba_lt089ac29000,
}, {
.compatible = "tpk,f07a-0102",
.data = &tpk_f07a_0102,
}, {
.compatible = "tpk,f10a-0102",
.data = &tpk_f10a_0102,
}, {
.compatible = "urt,umsh-8596md-t",
.data = &urt_umsh_8596md_parallel,
}, {
.compatible = "urt,umsh-8596md-1t",
.data = &urt_umsh_8596md_parallel,
}, {
.compatible = "urt,umsh-8596md-7t",
.data = &urt_umsh_8596md_parallel,
}, {
.compatible = "urt,umsh-8596md-11t",
.data = &urt_umsh_8596md_lvds,
}, {
.compatible = "urt,umsh-8596md-19t",
.data = &urt_umsh_8596md_lvds,
}, {
.compatible = "urt,umsh-8596md-20t",
.data = &urt_umsh_8596md_parallel,
}, {
.compatible = "vxt,vl050-8048nt-c01",
.data = &vl050_8048nt_c01,
}, {
.compatible = "winstar,wf35ltiacd",
.data = &winstar_wf35ltiacd,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, platform_of_match);
static int panel_simple_platform_probe(struct platform_device *pdev)
{
const struct of_device_id *id;
id = of_match_node(platform_of_match, pdev->dev.of_node);
if (!id)
return -ENODEV;
return panel_simple_probe(&pdev->dev, id->data);
}
static int panel_simple_platform_remove(struct platform_device *pdev)
{
return panel_simple_remove(&pdev->dev);
}
static void panel_simple_platform_shutdown(struct platform_device *pdev)
{
panel_simple_shutdown(&pdev->dev);
}
static struct platform_driver panel_simple_platform_driver = {
.driver = {
.name = "panel-simple",
.of_match_table = platform_of_match,
},
.probe = panel_simple_platform_probe,
.remove = panel_simple_platform_remove,
.shutdown = panel_simple_platform_shutdown,
};
struct panel_desc_dsi {
struct panel_desc desc;
unsigned long flags;
enum mipi_dsi_pixel_format format;
unsigned int lanes;
};
static const struct drm_display_mode auo_b080uan01_mode = {
.clock = 154500,
.hdisplay = 1200,
.hsync_start = 1200 + 62,
.hsync_end = 1200 + 62 + 4,
.htotal = 1200 + 62 + 4 + 62,
.vdisplay = 1920,
.vsync_start = 1920 + 9,
.vsync_end = 1920 + 9 + 2,
.vtotal = 1920 + 9 + 2 + 8,
.vrefresh = 60,
};
static const struct panel_desc_dsi auo_b080uan01 = {
.desc = {
.modes = &auo_b080uan01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 108,
.height = 272,
},
},
.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode boe_tv080wum_nl0_mode = {
.clock = 160000,
.hdisplay = 1200,
.hsync_start = 1200 + 120,
.hsync_end = 1200 + 120 + 20,
.htotal = 1200 + 120 + 20 + 21,
.vdisplay = 1920,
.vsync_start = 1920 + 21,
.vsync_end = 1920 + 21 + 3,
.vtotal = 1920 + 21 + 3 + 18,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc_dsi boe_tv080wum_nl0 = {
.desc = {
.modes = &boe_tv080wum_nl0_mode,
.num_modes = 1,
.size = {
.width = 107,
.height = 172,
},
},
.flags = MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode lg_ld070wx3_sl01_mode = {
.clock = 71000,
.hdisplay = 800,
.hsync_start = 800 + 32,
.hsync_end = 800 + 32 + 1,
.htotal = 800 + 32 + 1 + 57,
.vdisplay = 1280,
.vsync_start = 1280 + 28,
.vsync_end = 1280 + 28 + 1,
.vtotal = 1280 + 28 + 1 + 14,
.vrefresh = 60,
};
static const struct panel_desc_dsi lg_ld070wx3_sl01 = {
.desc = {
.modes = &lg_ld070wx3_sl01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 94,
.height = 151,
},
},
.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode lg_lh500wx1_sd03_mode = {
.clock = 67000,
.hdisplay = 720,
.hsync_start = 720 + 12,
.hsync_end = 720 + 12 + 4,
.htotal = 720 + 12 + 4 + 112,
.vdisplay = 1280,
.vsync_start = 1280 + 8,
.vsync_end = 1280 + 8 + 4,
.vtotal = 1280 + 8 + 4 + 12,
.vrefresh = 60,
};
static const struct panel_desc_dsi lg_lh500wx1_sd03 = {
.desc = {
.modes = &lg_lh500wx1_sd03_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 62,
.height = 110,
},
},
.flags = MIPI_DSI_MODE_VIDEO,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode panasonic_vvx10f004b00_mode = {
.clock = 157200,
.hdisplay = 1920,
.hsync_start = 1920 + 154,
.hsync_end = 1920 + 154 + 16,
.htotal = 1920 + 154 + 16 + 32,
.vdisplay = 1200,
.vsync_start = 1200 + 17,
.vsync_end = 1200 + 17 + 2,
.vtotal = 1200 + 17 + 2 + 16,
.vrefresh = 60,
};
static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
.desc = {
.modes = &panasonic_vvx10f004b00_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 217,
.height = 136,
},
},
.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_CLOCK_NON_CONTINUOUS,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode lg_acx467akm_7_mode = {
.clock = 150000,
.hdisplay = 1080,
.hsync_start = 1080 + 2,
.hsync_end = 1080 + 2 + 2,
.htotal = 1080 + 2 + 2 + 2,
.vdisplay = 1920,
.vsync_start = 1920 + 2,
.vsync_end = 1920 + 2 + 2,
.vtotal = 1920 + 2 + 2 + 2,
.vrefresh = 60,
};
static const struct panel_desc_dsi lg_acx467akm_7 = {
.desc = {
.modes = &lg_acx467akm_7_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 62,
.height = 110,
},
},
.flags = 0,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct drm_display_mode osd101t2045_53ts_mode = {
.clock = 154500,
.hdisplay = 1920,
.hsync_start = 1920 + 112,
.hsync_end = 1920 + 112 + 16,
.htotal = 1920 + 112 + 16 + 32,
.vdisplay = 1200,
.vsync_start = 1200 + 16,
.vsync_end = 1200 + 16 + 2,
.vtotal = 1200 + 16 + 2 + 16,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc_dsi osd101t2045_53ts = {
.desc = {
.modes = &osd101t2045_53ts_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 217,
.height = 136,
},
},
.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_EOT_PACKET,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
};
static const struct of_device_id dsi_of_match[] = {
{
.compatible = "auo,b080uan01",
.data = &auo_b080uan01
}, {
.compatible = "boe,tv080wum-nl0",
.data = &boe_tv080wum_nl0
}, {
.compatible = "lg,ld070wx3-sl01",
.data = &lg_ld070wx3_sl01
}, {
.compatible = "lg,lh500wx1-sd03",
.data = &lg_lh500wx1_sd03
}, {
.compatible = "panasonic,vvx10f004b00",
.data = &panasonic_vvx10f004b00
}, {
.compatible = "lg,acx467akm-7",
.data = &lg_acx467akm_7
}, {
.compatible = "osddisplays,osd101t2045-53ts",
.data = &osd101t2045_53ts
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, dsi_of_match);
static int panel_simple_dsi_probe(struct mipi_dsi_device *dsi)
{
const struct panel_desc_dsi *desc;
const struct of_device_id *id;
int err;
id = of_match_node(dsi_of_match, dsi->dev.of_node);
if (!id)
return -ENODEV;
desc = id->data;
err = panel_simple_probe(&dsi->dev, &desc->desc);
if (err < 0)
return err;
dsi->mode_flags = desc->flags;
dsi->format = desc->format;
dsi->lanes = desc->lanes;
err = mipi_dsi_attach(dsi);
if (err) {
struct panel_simple *panel = dev_get_drvdata(&dsi->dev);
drm_panel_remove(&panel->base);
}
return err;
}
static int panel_simple_dsi_remove(struct mipi_dsi_device *dsi)
{
int err;
err = mipi_dsi_detach(dsi);
if (err < 0)
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
return panel_simple_remove(&dsi->dev);
}
static void panel_simple_dsi_shutdown(struct mipi_dsi_device *dsi)
{
panel_simple_shutdown(&dsi->dev);
}
static struct mipi_dsi_driver panel_simple_dsi_driver = {
.driver = {
.name = "panel-simple-dsi",
.of_match_table = dsi_of_match,
},
.probe = panel_simple_dsi_probe,
.remove = panel_simple_dsi_remove,
.shutdown = panel_simple_dsi_shutdown,
};
static int __init panel_simple_init(void)
{
int err;
err = platform_driver_register(&panel_simple_platform_driver);
if (err < 0)
return err;
if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) {
err = mipi_dsi_driver_register(&panel_simple_dsi_driver);
if (err < 0)
return err;
}
return 0;
}
module_init(panel_simple_init);
static void __exit panel_simple_exit(void)
{
if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
mipi_dsi_driver_unregister(&panel_simple_dsi_driver);
platform_driver_unregister(&panel_simple_platform_driver);
}
module_exit(panel_simple_exit);
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
MODULE_DESCRIPTION("DRM Driver for Simple Panels");
MODULE_LICENSE("GPL and additional rights");