linux_dsm_epyc7002/arch/arm/include/asm/kvm_mmu.h

432 lines
9.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef __ARM_KVM_MMU_H__
#define __ARM_KVM_MMU_H__
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
#include <asm/memory.h>
#include <asm/page.h>
/*
* We directly use the kernel VA for the HYP, as we can directly share
* the mapping (HTTBR "covers" TTBR1).
*/
#define kern_hyp_va(kva) (kva)
/* Contrary to arm64, there is no need to generate a PC-relative address */
#define hyp_symbol_addr(s) \
({ \
typeof(s) *addr = &(s); \
addr; \
})
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
#ifndef __ASSEMBLY__
#include <linux/highmem.h>
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_hyp.h>
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
#include <asm/pgalloc.h>
#include <asm/stage2_pgtable.h>
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
/* Ensure compatibility with arm64 */
#define VA_BITS 32
#define kvm_phys_shift(kvm) KVM_PHYS_SHIFT
#define kvm_phys_size(kvm) (1ULL << kvm_phys_shift(kvm))
#define kvm_phys_mask(kvm) (kvm_phys_size(kvm) - 1ULL)
#define kvm_vttbr_baddr_mask(kvm) VTTBR_BADDR_MASK
#define stage2_pgd_size(kvm) (PTRS_PER_S2_PGD * sizeof(pgd_t))
int create_hyp_mappings(void *from, void *to, pgprot_t prot);
int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
void __iomem **kaddr,
void __iomem **haddr);
int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size,
void **haddr);
void free_hyp_pgds(void);
void stage2_unmap_vm(struct kvm *kvm);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 06:28:07 +07:00
int kvm_alloc_stage2_pgd(struct kvm *kvm);
void kvm_free_stage2_pgd(struct kvm *kvm);
int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
phys_addr_t pa, unsigned long size, bool writable);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 06:28:07 +07:00
int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
phys_addr_t kvm_mmu_get_httbr(void);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
phys_addr_t kvm_get_idmap_vector(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
#define kvm_mk_pmd(ptep) __pmd(__pa(ptep) | PMD_TYPE_TABLE)
#define kvm_mk_pud(pmdp) __pud(__pa(pmdp) | PMD_TYPE_TABLE)
#define kvm_mk_pgd(pudp) ({ BUILD_BUG(); 0; })
#define kvm_pfn_pte(pfn, prot) pfn_pte(pfn, prot)
#define kvm_pfn_pmd(pfn, prot) pfn_pmd(pfn, prot)
#define kvm_pfn_pud(pfn, prot) (__pud(0))
#define kvm_pud_pfn(pud) ({ WARN_ON(1); 0; })
#define kvm_pmd_mkhuge(pmd) pmd_mkhuge(pmd)
/* No support for pud hugepages */
#define kvm_pud_mkhuge(pud) ( {WARN_ON(1); pud; })
/*
* The following kvm_*pud*() functions are provided strictly to allow
* sharing code with arm64. They should never be called in practice.
*/
static inline void kvm_set_s2pud_readonly(pud_t *pud)
{
WARN_ON(1);
}
static inline bool kvm_s2pud_readonly(pud_t *pud)
{
WARN_ON(1);
return false;
}
static inline void kvm_set_pud(pud_t *pud, pud_t new_pud)
{
WARN_ON(1);
}
static inline pud_t kvm_s2pud_mkwrite(pud_t pud)
{
WARN_ON(1);
return pud;
}
static inline pud_t kvm_s2pud_mkexec(pud_t pud)
{
WARN_ON(1);
return pud;
}
static inline bool kvm_s2pud_exec(pud_t *pud)
{
WARN_ON(1);
return false;
}
static inline pud_t kvm_s2pud_mkyoung(pud_t pud)
{
BUG();
return pud;
}
static inline bool kvm_s2pud_young(pud_t pud)
{
WARN_ON(1);
return false;
}
kvm: arm64: Enable hardware updates of the Access Flag for Stage 2 page tables The ARMv8.1 architecture extensions introduce support for hardware updates of the access and dirty information in page table entries. With VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the PTE_AF bit cleared in the stage 2 page table, instead of raising an Access Flag fault to EL2 the CPU sets the actual page table entry bit (10). To ensure that kernel modifications to the page table do not inadvertently revert a bit set by hardware updates, certain Stage 2 software pte/pmd operations must be performed atomically. The main user of the AF bit is the kvm_age_hva() mechanism. The kvm_age_hva_handler() function performs a "test and clear young" action on the pte/pmd. This needs to be atomic in respect of automatic hardware updates of the AF bit. Since the AF bit is in the same position for both Stage 1 and Stage 2, the patch reuses the existing ptep_test_and_clear_young() functionality if __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the existing pte_young/pte_mkold mechanism is preserved. The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have to perform atomic modifications in order to avoid a race with updates of the AF bit. The arm64 implementation has been re-written using exclusives. Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer argument and modify the pte/pmd in place. However, these functions are only used on local variables rather than actual page table entries, so it makes more sense to follow the pte_mkwrite() approach for stage 1 attributes. The change to kvm_s2pte_mkwrite() makes it clear that these functions do not modify the actual page table entries. The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit explicitly) do not need to be modified since hardware updates of the dirty status are not supported by KVM, so there is no possibility of losing such information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-13 23:57:37 +07:00
static inline pte_t kvm_s2pte_mkwrite(pte_t pte)
{
kvm: arm64: Enable hardware updates of the Access Flag for Stage 2 page tables The ARMv8.1 architecture extensions introduce support for hardware updates of the access and dirty information in page table entries. With VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the PTE_AF bit cleared in the stage 2 page table, instead of raising an Access Flag fault to EL2 the CPU sets the actual page table entry bit (10). To ensure that kernel modifications to the page table do not inadvertently revert a bit set by hardware updates, certain Stage 2 software pte/pmd operations must be performed atomically. The main user of the AF bit is the kvm_age_hva() mechanism. The kvm_age_hva_handler() function performs a "test and clear young" action on the pte/pmd. This needs to be atomic in respect of automatic hardware updates of the AF bit. Since the AF bit is in the same position for both Stage 1 and Stage 2, the patch reuses the existing ptep_test_and_clear_young() functionality if __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the existing pte_young/pte_mkold mechanism is preserved. The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have to perform atomic modifications in order to avoid a race with updates of the AF bit. The arm64 implementation has been re-written using exclusives. Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer argument and modify the pte/pmd in place. However, these functions are only used on local variables rather than actual page table entries, so it makes more sense to follow the pte_mkwrite() approach for stage 1 attributes. The change to kvm_s2pte_mkwrite() makes it clear that these functions do not modify the actual page table entries. The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit explicitly) do not need to be modified since hardware updates of the dirty status are not supported by KVM, so there is no possibility of losing such information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-13 23:57:37 +07:00
pte_val(pte) |= L_PTE_S2_RDWR;
return pte;
}
kvm: arm64: Enable hardware updates of the Access Flag for Stage 2 page tables The ARMv8.1 architecture extensions introduce support for hardware updates of the access and dirty information in page table entries. With VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the PTE_AF bit cleared in the stage 2 page table, instead of raising an Access Flag fault to EL2 the CPU sets the actual page table entry bit (10). To ensure that kernel modifications to the page table do not inadvertently revert a bit set by hardware updates, certain Stage 2 software pte/pmd operations must be performed atomically. The main user of the AF bit is the kvm_age_hva() mechanism. The kvm_age_hva_handler() function performs a "test and clear young" action on the pte/pmd. This needs to be atomic in respect of automatic hardware updates of the AF bit. Since the AF bit is in the same position for both Stage 1 and Stage 2, the patch reuses the existing ptep_test_and_clear_young() functionality if __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the existing pte_young/pte_mkold mechanism is preserved. The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have to perform atomic modifications in order to avoid a race with updates of the AF bit. The arm64 implementation has been re-written using exclusives. Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer argument and modify the pte/pmd in place. However, these functions are only used on local variables rather than actual page table entries, so it makes more sense to follow the pte_mkwrite() approach for stage 1 attributes. The change to kvm_s2pte_mkwrite() makes it clear that these functions do not modify the actual page table entries. The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit explicitly) do not need to be modified since hardware updates of the dirty status are not supported by KVM, so there is no possibility of losing such information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-13 23:57:37 +07:00
static inline pmd_t kvm_s2pmd_mkwrite(pmd_t pmd)
{
kvm: arm64: Enable hardware updates of the Access Flag for Stage 2 page tables The ARMv8.1 architecture extensions introduce support for hardware updates of the access and dirty information in page table entries. With VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the PTE_AF bit cleared in the stage 2 page table, instead of raising an Access Flag fault to EL2 the CPU sets the actual page table entry bit (10). To ensure that kernel modifications to the page table do not inadvertently revert a bit set by hardware updates, certain Stage 2 software pte/pmd operations must be performed atomically. The main user of the AF bit is the kvm_age_hva() mechanism. The kvm_age_hva_handler() function performs a "test and clear young" action on the pte/pmd. This needs to be atomic in respect of automatic hardware updates of the AF bit. Since the AF bit is in the same position for both Stage 1 and Stage 2, the patch reuses the existing ptep_test_and_clear_young() functionality if __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the existing pte_young/pte_mkold mechanism is preserved. The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have to perform atomic modifications in order to avoid a race with updates of the AF bit. The arm64 implementation has been re-written using exclusives. Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer argument and modify the pte/pmd in place. However, these functions are only used on local variables rather than actual page table entries, so it makes more sense to follow the pte_mkwrite() approach for stage 1 attributes. The change to kvm_s2pte_mkwrite() makes it clear that these functions do not modify the actual page table entries. The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit explicitly) do not need to be modified since hardware updates of the dirty status are not supported by KVM, so there is no possibility of losing such information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-13 23:57:37 +07:00
pmd_val(pmd) |= L_PMD_S2_RDWR;
return pmd;
}
static inline pte_t kvm_s2pte_mkexec(pte_t pte)
{
pte_val(pte) &= ~L_PTE_XN;
return pte;
}
static inline pmd_t kvm_s2pmd_mkexec(pmd_t pmd)
{
pmd_val(pmd) &= ~PMD_SECT_XN;
return pmd;
}
static inline void kvm_set_s2pte_readonly(pte_t *pte)
{
pte_val(*pte) = (pte_val(*pte) & ~L_PTE_S2_RDWR) | L_PTE_S2_RDONLY;
}
static inline bool kvm_s2pte_readonly(pte_t *pte)
{
return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY;
}
static inline bool kvm_s2pte_exec(pte_t *pte)
{
return !(pte_val(*pte) & L_PTE_XN);
}
static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
{
pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY;
}
static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
{
return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY;
}
static inline bool kvm_s2pmd_exec(pmd_t *pmd)
{
return !(pmd_val(*pmd) & PMD_SECT_XN);
}
static inline bool kvm_page_empty(void *ptr)
{
struct page *ptr_page = virt_to_page(ptr);
return page_count(ptr_page) == 1;
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 17:14:28 +07:00
#define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep)
#define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp)
#define kvm_pud_table_empty(kvm, pudp) false
#define hyp_pte_table_empty(ptep) kvm_page_empty(ptep)
#define hyp_pmd_table_empty(pmdp) kvm_page_empty(pmdp)
#define hyp_pud_table_empty(pudp) false
struct kvm;
#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l))
static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
{
return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101;
}
static inline void __clean_dcache_guest_page(kvm_pfn_t pfn, unsigned long size)
{
/*
* Clean the dcache to the Point of Coherency.
*
* We need to do this through a kernel mapping (using the
* user-space mapping has proved to be the wrong
* solution). For that, we need to kmap one page at a time,
* and iterate over the range.
*/
VM_BUG_ON(size & ~PAGE_MASK);
while (size) {
void *va = kmap_atomic_pfn(pfn);
kvm_flush_dcache_to_poc(va, PAGE_SIZE);
size -= PAGE_SIZE;
pfn++;
kunmap_atomic(va);
}
}
static inline void __invalidate_icache_guest_page(kvm_pfn_t pfn,
unsigned long size)
{
u32 iclsz;
/*
* If we are going to insert an instruction page and the icache is
* either VIPT or PIPT, there is a potential problem where the host
* (or another VM) may have used the same page as this guest, and we
* read incorrect data from the icache. If we're using a PIPT cache,
* we can invalidate just that page, but if we are using a VIPT cache
* we need to invalidate the entire icache - damn shame - as written
* in the ARM ARM (DDI 0406C.b - Page B3-1393).
*
* VIVT caches are tagged using both the ASID and the VMID and doesn't
* need any kind of flushing (DDI 0406C.b - Page B3-1392).
*/
VM_BUG_ON(size & ~PAGE_MASK);
if (icache_is_vivt_asid_tagged())
return;
if (!icache_is_pipt()) {
/* any kind of VIPT cache */
__flush_icache_all();
return;
}
/*
* CTR IminLine contains Log2 of the number of words in the
* cache line, so we can get the number of words as
* 2 << (IminLine - 1). To get the number of bytes, we
* multiply by 4 (the number of bytes in a 32-bit word), and
* get 4 << (IminLine).
*/
iclsz = 4 << (read_cpuid(CPUID_CACHETYPE) & 0xf);
while (size) {
void *va = kmap_atomic_pfn(pfn);
void *end = va + PAGE_SIZE;
void *addr = va;
do {
write_sysreg(addr, ICIMVAU);
addr += iclsz;
} while (addr < end);
dsb(ishst);
isb();
size -= PAGE_SIZE;
pfn++;
kunmap_atomic(va);
}
/* Check if we need to invalidate the BTB */
if ((read_cpuid_ext(CPUID_EXT_MMFR1) >> 28) != 4) {
write_sysreg(0, BPIALLIS);
dsb(ishst);
isb();
}
}
static inline void __kvm_flush_dcache_pte(pte_t pte)
{
void *va = kmap_atomic(pte_page(pte));
kvm_flush_dcache_to_poc(va, PAGE_SIZE);
kunmap_atomic(va);
}
static inline void __kvm_flush_dcache_pmd(pmd_t pmd)
{
unsigned long size = PMD_SIZE;
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
kvm_pfn_t pfn = pmd_pfn(pmd);
while (size) {
void *va = kmap_atomic_pfn(pfn);
kvm_flush_dcache_to_poc(va, PAGE_SIZE);
pfn++;
size -= PAGE_SIZE;
kunmap_atomic(va);
}
}
static inline void __kvm_flush_dcache_pud(pud_t pud)
{
}
#define kvm_virt_to_phys(x) virt_to_idmap((unsigned long)(x))
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
void kvm_set_way_flush(struct kvm_vcpu *vcpu);
void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled);
static inline bool __kvm_cpu_uses_extended_idmap(void)
{
return false;
}
static inline unsigned long __kvm_idmap_ptrs_per_pgd(void)
{
return PTRS_PER_PGD;
}
static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
pgd_t *hyp_pgd,
pgd_t *merged_hyp_pgd,
unsigned long hyp_idmap_start) { }
static inline unsigned int kvm_get_vmid_bits(void)
{
return 8;
}
/*
* We are not in the kvm->srcu critical section most of the time, so we take
* the SRCU read lock here. Since we copy the data from the user page, we
* can immediately drop the lock again.
*/
static inline int kvm_read_guest_lock(struct kvm *kvm,
gpa_t gpa, void *data, unsigned long len)
{
int srcu_idx = srcu_read_lock(&kvm->srcu);
int ret = kvm_read_guest(kvm, gpa, data, len);
srcu_read_unlock(&kvm->srcu, srcu_idx);
return ret;
}
static inline void *kvm_get_hyp_vector(void)
{
switch(read_cpuid_part()) {
#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
case ARM_CPU_PART_CORTEX_A12:
case ARM_CPU_PART_CORTEX_A17:
{
extern char __kvm_hyp_vector_bp_inv[];
return kvm_ksym_ref(__kvm_hyp_vector_bp_inv);
}
case ARM_CPU_PART_BRAHMA_B15:
case ARM_CPU_PART_CORTEX_A15:
{
extern char __kvm_hyp_vector_ic_inv[];
return kvm_ksym_ref(__kvm_hyp_vector_ic_inv);
}
#endif
default:
{
extern char __kvm_hyp_vector[];
return kvm_ksym_ref(__kvm_hyp_vector);
}
}
}
static inline int kvm_map_vectors(void)
{
return 0;
}
static inline int hyp_map_aux_data(void)
{
return 0;
}
#define kvm_phys_to_vttbr(addr) (addr)
kvm: arm64: Set a limit on the IPA size So far we have restricted the IPA size of the VM to the default value (40bits). Now that we can manage the IPA size per VM and support dynamic stage2 page tables, we can allow VMs to have larger IPA. This patch introduces a the maximum IPA size supported on the host. This is decided by the following factors : 1) Maximum PARange supported by the CPUs - This can be inferred from the system wide safe value. 2) Maximum PA size supported by the host kernel (48 vs 52) 3) Number of levels in the host page table (as we base our stage2 tables on the host table helpers). Since the stage2 page table code is dependent on the stage1 page table, we always ensure that : Number of Levels at Stage1 >= Number of Levels at Stage2 So we limit the IPA to make sure that the above condition is satisfied. This will affect the following combinations of VA_BITS and IPA for different page sizes. Host configuration | Unsupported IPA ranges 39bit VA, 4K | [44, 48] 36bit VA, 16K | [41, 48] 42bit VA, 64K | [47, 52] Supporting the above combinations need independent stage2 page table manipulation code, which would need substantial changes. We could purse the solution independently and switch the page table code once we have it ready. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-26 23:32:52 +07:00
static inline void kvm_set_ipa_limit(void) {}
static inline bool kvm_cpu_has_cnp(void)
{
return false;
}
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-13 01:12:06 +07:00
#endif /* !__ASSEMBLY__ */
#endif /* __ARM_KVM_MMU_H__ */