linux_dsm_epyc7002/drivers/mmc/host/sdhci-esdhc-imx.c

1221 lines
34 KiB
C
Raw Normal View History

/*
* Freescale eSDHC i.MX controller driver for the platform bus.
*
* derived from the OF-version.
*
* Copyright (c) 2010 Pengutronix e.K.
* Author: Wolfram Sang <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
#define ESDHC_CTRL_D3CD 0x08
/* VENDOR SPEC register */
#define ESDHC_VENDOR_SPEC 0xc0
#define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1)
#define ESDHC_VENDOR_SPEC_VSELECT (1 << 1)
#define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8)
#define ESDHC_WTMK_LVL 0x44
#define ESDHC_MIX_CTRL 0x48
#define ESDHC_MIX_CTRL_DDREN (1 << 3)
#define ESDHC_MIX_CTRL_AC23EN (1 << 7)
#define ESDHC_MIX_CTRL_EXE_TUNE (1 << 22)
#define ESDHC_MIX_CTRL_SMPCLK_SEL (1 << 23)
#define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25)
/* Bits 3 and 6 are not SDHCI standard definitions */
#define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7
/* Tuning bits */
#define ESDHC_MIX_CTRL_TUNING_MASK 0x03c00000
/* dll control register */
#define ESDHC_DLL_CTRL 0x60
#define ESDHC_DLL_OVERRIDE_VAL_SHIFT 9
#define ESDHC_DLL_OVERRIDE_EN_SHIFT 8
/* tune control register */
#define ESDHC_TUNE_CTRL_STATUS 0x68
#define ESDHC_TUNE_CTRL_STEP 1
#define ESDHC_TUNE_CTRL_MIN 0
#define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1)
#define ESDHC_TUNING_CTRL 0xcc
#define ESDHC_STD_TUNING_EN (1 << 24)
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
/*
* Our interpretation of the SDHCI_HOST_CONTROL register
*/
#define ESDHC_CTRL_4BITBUS (0x1 << 1)
#define ESDHC_CTRL_8BITBUS (0x2 << 1)
#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1)
/*
* There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
* Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
* but bit28 is used as the INT DMA ERR in fsl eSDHC design.
* Define this macro DMA error INT for fsl eSDHC
*/
#define ESDHC_INT_VENDOR_SPEC_DMA_ERR (1 << 28)
/*
* The CMDTYPE of the CMD register (offset 0xE) should be set to
* "11" when the STOP CMD12 is issued on imx53 to abort one
* open ended multi-blk IO. Otherwise the TC INT wouldn't
* be generated.
* In exact block transfer, the controller doesn't complete the
* operations automatically as required at the end of the
* transfer and remains on hold if the abort command is not sent.
* As a result, the TC flag is not asserted and SW received timeout
* exeception. Bit1 of Vendor Spec registor is used to fix it.
*/
#define ESDHC_FLAG_MULTIBLK_NO_INT BIT(1)
/*
* The flag enables the workaround for ESDHC errata ENGcm07207 which
* affects i.MX25 and i.MX35.
*/
#define ESDHC_FLAG_ENGCM07207 BIT(2)
/*
* The flag tells that the ESDHC controller is an USDHC block that is
* integrated on the i.MX6 series.
*/
#define ESDHC_FLAG_USDHC BIT(3)
/* The IP supports manual tuning process */
#define ESDHC_FLAG_MAN_TUNING BIT(4)
/* The IP supports standard tuning process */
#define ESDHC_FLAG_STD_TUNING BIT(5)
/* The IP has SDHCI_CAPABILITIES_1 register */
#define ESDHC_FLAG_HAVE_CAP1 BIT(6)
struct esdhc_soc_data {
u32 flags;
};
static struct esdhc_soc_data esdhc_imx25_data = {
.flags = ESDHC_FLAG_ENGCM07207,
};
static struct esdhc_soc_data esdhc_imx35_data = {
.flags = ESDHC_FLAG_ENGCM07207,
};
static struct esdhc_soc_data esdhc_imx51_data = {
.flags = 0,
};
static struct esdhc_soc_data esdhc_imx53_data = {
.flags = ESDHC_FLAG_MULTIBLK_NO_INT,
};
static struct esdhc_soc_data usdhc_imx6q_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING,
};
static struct esdhc_soc_data usdhc_imx6sl_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1,
};
struct pltfm_imx_data {
u32 scratchpad;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_default;
struct pinctrl_state *pins_100mhz;
struct pinctrl_state *pins_200mhz;
const struct esdhc_soc_data *socdata;
struct esdhc_platform_data boarddata;
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
enum {
NO_CMD_PENDING, /* no multiblock command pending*/
MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */
WAIT_FOR_INT, /* sent CMD12, waiting for response INT */
} multiblock_status;
u32 uhs_mode;
u32 is_ddr;
};
static struct platform_device_id imx_esdhc_devtype[] = {
{
.name = "sdhci-esdhc-imx25",
.driver_data = (kernel_ulong_t) &esdhc_imx25_data,
}, {
.name = "sdhci-esdhc-imx35",
.driver_data = (kernel_ulong_t) &esdhc_imx35_data,
}, {
.name = "sdhci-esdhc-imx51",
.driver_data = (kernel_ulong_t) &esdhc_imx51_data,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
static const struct of_device_id imx_esdhc_dt_ids[] = {
{ .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data, },
{ .compatible = "fsl,imx35-esdhc", .data = &esdhc_imx35_data, },
{ .compatible = "fsl,imx51-esdhc", .data = &esdhc_imx51_data, },
{ .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, },
{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
{
return data->socdata == &esdhc_imx25_data;
}
static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
{
return data->socdata == &esdhc_imx53_data;
}
static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
{
return data->socdata == &usdhc_imx6q_data;
}
static inline int esdhc_is_usdhc(struct pltfm_imx_data *data)
{
return !!(data->socdata->flags & ESDHC_FLAG_USDHC);
}
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
{
void __iomem *base = host->ioaddr + (reg & ~0x3);
u32 shift = (reg & 0x3) * 8;
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
}
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 val = readl(host->ioaddr + reg);
if (unlikely(reg == SDHCI_PRESENT_STATE)) {
u32 fsl_prss = val;
/* save the least 20 bits */
val = fsl_prss & 0x000FFFFF;
/* move dat[0-3] bits */
val |= (fsl_prss & 0x0F000000) >> 4;
/* move cmd line bit */
val |= (fsl_prss & 0x00800000) << 1;
}
if (unlikely(reg == SDHCI_CAPABILITIES)) {
/* ignore bit[0-15] as it stores cap_1 register val for mx6sl */
if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1)
val &= 0xffff0000;
/* In FSL esdhc IC module, only bit20 is used to indicate the
* ADMA2 capability of esdhc, but this bit is messed up on
* some SOCs (e.g. on MX25, MX35 this bit is set, but they
* don't actually support ADMA2). So set the BROKEN_ADMA
* uirk on MX25/35 platforms.
*/
if (val & SDHCI_CAN_DO_ADMA1) {
val &= ~SDHCI_CAN_DO_ADMA1;
val |= SDHCI_CAN_DO_ADMA2;
}
}
if (unlikely(reg == SDHCI_CAPABILITIES_1)) {
if (esdhc_is_usdhc(imx_data)) {
if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1)
val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF;
else
/* imx6q/dl does not have cap_1 register, fake one */
val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
| SDHCI_SUPPORT_SDR50
| SDHCI_USE_SDR50_TUNING;
}
}
if (unlikely(reg == SDHCI_MAX_CURRENT) && esdhc_is_usdhc(imx_data)) {
val = 0;
val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT;
val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT;
val |= 0xFF << SDHCI_MAX_CURRENT_180_SHIFT;
}
if (unlikely(reg == SDHCI_INT_STATUS)) {
if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
val |= SDHCI_INT_ADMA_ERROR;
}
/*
* mask off the interrupt we get in response to the manually
* sent CMD12
*/
if ((imx_data->multiblock_status == WAIT_FOR_INT) &&
((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) {
val &= ~SDHCI_INT_RESPONSE;
writel(SDHCI_INT_RESPONSE, host->ioaddr +
SDHCI_INT_STATUS);
imx_data->multiblock_status = NO_CMD_PENDING;
}
}
return val;
}
static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 data;
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
if (val & SDHCI_INT_CARD_INT) {
/*
* Clear and then set D3CD bit to avoid missing the
* card interrupt. This is a eSDHC controller problem
* so we need to apply the following workaround: clear
* and set D3CD bit will make eSDHC re-sample the card
* interrupt. In case a card interrupt was lost,
* re-sample it by the following steps.
*/
data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
data &= ~ESDHC_CTRL_D3CD;
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
data |= ESDHC_CTRL_D3CD;
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
}
}
if (unlikely((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
&& (reg == SDHCI_INT_STATUS)
&& (val & SDHCI_INT_DATA_END))) {
u32 v;
v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK;
writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS)
{
/* send a manual CMD12 with RESPTYP=none */
data = MMC_STOP_TRANSMISSION << 24 |
SDHCI_CMD_ABORTCMD << 16;
writel(data, host->ioaddr + SDHCI_TRANSFER_MODE);
imx_data->multiblock_status = WAIT_FOR_INT;
}
}
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
if (val & SDHCI_INT_ADMA_ERROR) {
val &= ~SDHCI_INT_ADMA_ERROR;
val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR;
}
}
writel(val, host->ioaddr + reg);
}
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u16 ret = 0;
u32 val;
if (unlikely(reg == SDHCI_HOST_VERSION)) {
reg ^= 2;
if (esdhc_is_usdhc(imx_data)) {
/*
* The usdhc register returns a wrong host version.
* Correct it here.
*/
return SDHCI_SPEC_300;
}
}
if (unlikely(reg == SDHCI_HOST_CONTROL2)) {
val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
if (val & ESDHC_VENDOR_SPEC_VSELECT)
ret |= SDHCI_CTRL_VDD_180;
if (esdhc_is_usdhc(imx_data)) {
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
val = readl(host->ioaddr + ESDHC_MIX_CTRL);
else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
/* the std tuning bits is in ACMD12_ERR for imx6sl */
val = readl(host->ioaddr + SDHCI_ACMD12_ERR);
}
if (val & ESDHC_MIX_CTRL_EXE_TUNE)
ret |= SDHCI_CTRL_EXEC_TUNING;
if (val & ESDHC_MIX_CTRL_SMPCLK_SEL)
ret |= SDHCI_CTRL_TUNED_CLK;
ret |= (imx_data->uhs_mode & SDHCI_CTRL_UHS_MASK);
ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
return ret;
}
if (unlikely(reg == SDHCI_TRANSFER_MODE)) {
if (esdhc_is_usdhc(imx_data)) {
u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
ret = m & ESDHC_MIX_CTRL_SDHCI_MASK;
/* Swap AC23 bit */
if (m & ESDHC_MIX_CTRL_AC23EN) {
ret &= ~ESDHC_MIX_CTRL_AC23EN;
ret |= SDHCI_TRNS_AUTO_CMD23;
}
} else {
ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE);
}
return ret;
}
return readw(host->ioaddr + reg);
}
static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 new_val = 0;
switch (reg) {
case SDHCI_CLOCK_CONTROL:
new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
if (val & SDHCI_CLOCK_CARD_EN)
new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
else
new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
return;
case SDHCI_HOST_CONTROL2:
new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
if (val & SDHCI_CTRL_VDD_180)
new_val |= ESDHC_VENDOR_SPEC_VSELECT;
else
new_val &= ~ESDHC_VENDOR_SPEC_VSELECT;
writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
imx_data->uhs_mode = val & SDHCI_CTRL_UHS_MASK;
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
if (val & SDHCI_CTRL_TUNED_CLK)
new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL;
else
new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR);
u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
if (val & SDHCI_CTRL_TUNED_CLK) {
v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
} else {
v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
}
if (val & SDHCI_CTRL_EXEC_TUNING) {
v |= ESDHC_MIX_CTRL_EXE_TUNE;
m |= ESDHC_MIX_CTRL_FBCLK_SEL;
} else {
v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
}
writel(v, host->ioaddr + SDHCI_ACMD12_ERR);
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
}
return;
case SDHCI_TRANSFER_MODE:
if ((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
&& (host->cmd->data->blocks > 1)
&& (host->cmd->data->flags & MMC_DATA_READ)) {
u32 v;
v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK;
writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
}
if (esdhc_is_usdhc(imx_data)) {
u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
/* Swap AC23 bit */
if (val & SDHCI_TRNS_AUTO_CMD23) {
val &= ~SDHCI_TRNS_AUTO_CMD23;
val |= ESDHC_MIX_CTRL_AC23EN;
}
m = val | (m & ~ESDHC_MIX_CTRL_SDHCI_MASK);
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
} else {
/*
* Postpone this write, we must do it together with a
* command write that is down below.
*/
imx_data->scratchpad = val;
}
return;
case SDHCI_COMMAND:
if (host->cmd->opcode == MMC_STOP_TRANSMISSION)
val |= SDHCI_CMD_ABORTCMD;
if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
(imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
imx_data->multiblock_status = MULTIBLK_IN_PROCESS;
if (esdhc_is_usdhc(imx_data))
writel(val << 16,
host->ioaddr + SDHCI_TRANSFER_MODE);
else
writel(val << 16 | imx_data->scratchpad,
host->ioaddr + SDHCI_TRANSFER_MODE);
return;
case SDHCI_BLOCK_SIZE:
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
break;
}
esdhc_clrset_le(host, 0xffff, val, reg);
}
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 new_val;
u32 mask;
switch (reg) {
case SDHCI_POWER_CONTROL:
/*
* FSL put some DMA bits here
* If your board has a regulator, code should be here
*/
return;
case SDHCI_HOST_CONTROL:
/* FSL messed up here, so we need to manually compose it. */
new_val = val & SDHCI_CTRL_LED;
/* ensure the endianness */
new_val |= ESDHC_HOST_CONTROL_LE;
/* bits 8&9 are reserved on mx25 */
if (!is_imx25_esdhc(imx_data)) {
/* DMA mode bits are shifted */
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
}
/*
* Do not touch buswidth bits here. This is done in
* esdhc_pltfm_bus_width.
* Do not touch the D3CD bit either which is used for the
* SDIO interrupt errata workaround.
*/
mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD);
esdhc_clrset_le(host, mask, new_val, reg);
return;
}
esdhc_clrset_le(host, 0xff, val, reg);
/*
* The esdhc has a design violation to SDHC spec which tells
* that software reset should not affect card detection circuit.
* But esdhc clears its SYSCTL register bits [0..2] during the
* software reset. This will stop those clocks that card detection
* circuit relies on. To work around it, we turn the clocks on back
* to keep card detection circuit functional.
*/
if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1)) {
esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
/*
* The reset on usdhc fails to clear MIX_CTRL register.
* Do it manually here.
*/
if (esdhc_is_usdhc(imx_data)) {
/* the tuning bits should be kept during reset */
new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK,
host->ioaddr + ESDHC_MIX_CTRL);
imx_data->is_ddr = 0;
}
}
}
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context Sometimes we may meet the following lockdep issue. The root cause is .set_clock callback is executed with spin_lock_irqsave in sdhci_do_set_ios. However, the IMX set_clock callback will try to access clk_get_rate which is using a mutex lock. The fix avoids access mutex in .set_clock callback by initializing the pltfm_host->clock at probe time and use it later instead of calling clk_get_rate again in atomic context. [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.13.0-rc1+ #285 Not tainted ------------------------------------------------------ kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4 and this task is already holding: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 which would create a new lock dependency: (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&host->lock)->rlock#2){-.-...} ... which became HARDIRQ-irq-safe at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c to a HARDIRQ-irq-unsafe lock: (prepare_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable(); lock(&(&host->lock)->rlock#2); lock(prepare_lock); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 3 locks held by kworker/u8:1/29: #0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468 #2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&host->lock)->rlock#2){-.-...} ops: 330 { IN-HARDIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c IN-SOFTIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060204>] __lock_acquire+0x5d4/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120 [<8002b538>] tasklet_action+0xa0/0x15c [<8002b778>] __do_softirq+0x118/0x290 [<8002bcf4>] irq_exit+0xb4/0x10c [<8000f240>] handle_IRQ+0x5c/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<804611f4>] sdhci_do_set_ios+0x20/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044cea0>] mmc_power_up+0x6c/0xd0 [<8044dac4>] mmc_start_host+0x60/0x70 [<8044eb3c>] mmc_add_host+0x60/0x88 [<8046225c>] sdhci_add_host+0x7f8/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c } ... key at: [<80e040e8>] __key.26952+0x0/0x8 ... acquired at: [<8005eb60>] check_usage+0x3d0/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (prepare_lock){+.+...} ops: 395 { HARDIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c SOFTIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a0c8>] mutex_trylock+0x118/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<80482af8>] __clk_init+0x1c/0x45c [<8048306c>] _clk_register+0xd0/0x170 [<80483148>] clk_register+0x3c/0x7c [<80483b4c>] clk_register_fixed_rate+0x88/0xd8 [<80483c04>] of_fixed_clk_setup+0x68/0x94 [<8084c6fc>] of_clk_init+0x44/0x68 [<808202b0>] time_init+0x2c/0x38 [<8081ca14>] start_kernel+0x1e4/0x368 [<10008074>] 0x10008074 } ... key at: [<808afebc>] prepare_lock+0x38/0x48 ... acquired at: [<8005eb94>] check_usage+0x404/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c stack backtrace: CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285 Workqueue: kmmcd mmc_rescan Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0) r5:80979940 r4:bfa29b44 [<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8) [<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc) r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0 [<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84) [<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0) r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08 [<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4) [<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64) r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128 [<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4) r5:bf0e9aa8 r4:bf0e9c40 [<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498) [<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720) r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40 r3:00000000 [<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c) r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8 r4:bf0e9800 [<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60) r5:03197500 r4:bf0e9800 [<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14) r5:00000000 r4:bf0e9800 [<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520) [<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194) [<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0) r5:8065f358 r4:bf0e9af8 [<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468) r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00 r3:8044d774 [<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0) [<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0) [<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00 Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:53 +07:00
if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock))
return boarddata->f_max;
else
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context Sometimes we may meet the following lockdep issue. The root cause is .set_clock callback is executed with spin_lock_irqsave in sdhci_do_set_ios. However, the IMX set_clock callback will try to access clk_get_rate which is using a mutex lock. The fix avoids access mutex in .set_clock callback by initializing the pltfm_host->clock at probe time and use it later instead of calling clk_get_rate again in atomic context. [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.13.0-rc1+ #285 Not tainted ------------------------------------------------------ kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4 and this task is already holding: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 which would create a new lock dependency: (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&host->lock)->rlock#2){-.-...} ... which became HARDIRQ-irq-safe at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c to a HARDIRQ-irq-unsafe lock: (prepare_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable(); lock(&(&host->lock)->rlock#2); lock(prepare_lock); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 3 locks held by kworker/u8:1/29: #0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468 #2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&host->lock)->rlock#2){-.-...} ops: 330 { IN-HARDIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c IN-SOFTIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060204>] __lock_acquire+0x5d4/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120 [<8002b538>] tasklet_action+0xa0/0x15c [<8002b778>] __do_softirq+0x118/0x290 [<8002bcf4>] irq_exit+0xb4/0x10c [<8000f240>] handle_IRQ+0x5c/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<804611f4>] sdhci_do_set_ios+0x20/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044cea0>] mmc_power_up+0x6c/0xd0 [<8044dac4>] mmc_start_host+0x60/0x70 [<8044eb3c>] mmc_add_host+0x60/0x88 [<8046225c>] sdhci_add_host+0x7f8/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c } ... key at: [<80e040e8>] __key.26952+0x0/0x8 ... acquired at: [<8005eb60>] check_usage+0x3d0/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (prepare_lock){+.+...} ops: 395 { HARDIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c SOFTIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a0c8>] mutex_trylock+0x118/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<80482af8>] __clk_init+0x1c/0x45c [<8048306c>] _clk_register+0xd0/0x170 [<80483148>] clk_register+0x3c/0x7c [<80483b4c>] clk_register_fixed_rate+0x88/0xd8 [<80483c04>] of_fixed_clk_setup+0x68/0x94 [<8084c6fc>] of_clk_init+0x44/0x68 [<808202b0>] time_init+0x2c/0x38 [<8081ca14>] start_kernel+0x1e4/0x368 [<10008074>] 0x10008074 } ... key at: [<808afebc>] prepare_lock+0x38/0x48 ... acquired at: [<8005eb94>] check_usage+0x404/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c stack backtrace: CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285 Workqueue: kmmcd mmc_rescan Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0) r5:80979940 r4:bfa29b44 [<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8) [<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc) r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0 [<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84) [<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0) r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08 [<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4) [<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64) r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128 [<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4) r5:bf0e9aa8 r4:bf0e9c40 [<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498) [<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720) r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40 r3:00000000 [<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c) r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8 r4:bf0e9800 [<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60) r5:03197500 r4:bf0e9800 [<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14) r5:00000000 r4:bf0e9800 [<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520) [<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194) [<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0) r5:8065f358 r4:bf0e9af8 [<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468) r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00 r3:8044d774 [<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0) [<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0) [<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00 Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:53 +07:00
return pltfm_host->clock;
}
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context Sometimes we may meet the following lockdep issue. The root cause is .set_clock callback is executed with spin_lock_irqsave in sdhci_do_set_ios. However, the IMX set_clock callback will try to access clk_get_rate which is using a mutex lock. The fix avoids access mutex in .set_clock callback by initializing the pltfm_host->clock at probe time and use it later instead of calling clk_get_rate again in atomic context. [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.13.0-rc1+ #285 Not tainted ------------------------------------------------------ kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4 and this task is already holding: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 which would create a new lock dependency: (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&host->lock)->rlock#2){-.-...} ... which became HARDIRQ-irq-safe at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c to a HARDIRQ-irq-unsafe lock: (prepare_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable(); lock(&(&host->lock)->rlock#2); lock(prepare_lock); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 3 locks held by kworker/u8:1/29: #0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468 #2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&host->lock)->rlock#2){-.-...} ops: 330 { IN-HARDIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c IN-SOFTIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060204>] __lock_acquire+0x5d4/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120 [<8002b538>] tasklet_action+0xa0/0x15c [<8002b778>] __do_softirq+0x118/0x290 [<8002bcf4>] irq_exit+0xb4/0x10c [<8000f240>] handle_IRQ+0x5c/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<804611f4>] sdhci_do_set_ios+0x20/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044cea0>] mmc_power_up+0x6c/0xd0 [<8044dac4>] mmc_start_host+0x60/0x70 [<8044eb3c>] mmc_add_host+0x60/0x88 [<8046225c>] sdhci_add_host+0x7f8/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c } ... key at: [<80e040e8>] __key.26952+0x0/0x8 ... acquired at: [<8005eb60>] check_usage+0x3d0/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (prepare_lock){+.+...} ops: 395 { HARDIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c SOFTIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a0c8>] mutex_trylock+0x118/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<80482af8>] __clk_init+0x1c/0x45c [<8048306c>] _clk_register+0xd0/0x170 [<80483148>] clk_register+0x3c/0x7c [<80483b4c>] clk_register_fixed_rate+0x88/0xd8 [<80483c04>] of_fixed_clk_setup+0x68/0x94 [<8084c6fc>] of_clk_init+0x44/0x68 [<808202b0>] time_init+0x2c/0x38 [<8081ca14>] start_kernel+0x1e4/0x368 [<10008074>] 0x10008074 } ... key at: [<808afebc>] prepare_lock+0x38/0x48 ... acquired at: [<8005eb94>] check_usage+0x404/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c stack backtrace: CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285 Workqueue: kmmcd mmc_rescan Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0) r5:80979940 r4:bfa29b44 [<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8) [<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc) r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0 [<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84) [<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0) r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08 [<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4) [<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64) r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128 [<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4) r5:bf0e9aa8 r4:bf0e9c40 [<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498) [<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720) r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40 r3:00000000 [<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c) r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8 r4:bf0e9800 [<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60) r5:03197500 r4:bf0e9800 [<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14) r5:00000000 r4:bf0e9800 [<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520) [<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194) [<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0) r5:8065f358 r4:bf0e9af8 [<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468) r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00 r3:8044d774 [<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0) [<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0) [<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00 Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:53 +07:00
return pltfm_host->clock / 256 / 16;
}
static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context Sometimes we may meet the following lockdep issue. The root cause is .set_clock callback is executed with spin_lock_irqsave in sdhci_do_set_ios. However, the IMX set_clock callback will try to access clk_get_rate which is using a mutex lock. The fix avoids access mutex in .set_clock callback by initializing the pltfm_host->clock at probe time and use it later instead of calling clk_get_rate again in atomic context. [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.13.0-rc1+ #285 Not tainted ------------------------------------------------------ kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4 and this task is already holding: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 which would create a new lock dependency: (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&host->lock)->rlock#2){-.-...} ... which became HARDIRQ-irq-safe at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c to a HARDIRQ-irq-unsafe lock: (prepare_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable(); lock(&(&host->lock)->rlock#2); lock(prepare_lock); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 3 locks held by kworker/u8:1/29: #0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468 #2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&host->lock)->rlock#2){-.-...} ops: 330 { IN-HARDIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c IN-SOFTIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060204>] __lock_acquire+0x5d4/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120 [<8002b538>] tasklet_action+0xa0/0x15c [<8002b778>] __do_softirq+0x118/0x290 [<8002bcf4>] irq_exit+0xb4/0x10c [<8000f240>] handle_IRQ+0x5c/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<804611f4>] sdhci_do_set_ios+0x20/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044cea0>] mmc_power_up+0x6c/0xd0 [<8044dac4>] mmc_start_host+0x60/0x70 [<8044eb3c>] mmc_add_host+0x60/0x88 [<8046225c>] sdhci_add_host+0x7f8/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c } ... key at: [<80e040e8>] __key.26952+0x0/0x8 ... acquired at: [<8005eb60>] check_usage+0x3d0/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (prepare_lock){+.+...} ops: 395 { HARDIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c SOFTIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a0c8>] mutex_trylock+0x118/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<80482af8>] __clk_init+0x1c/0x45c [<8048306c>] _clk_register+0xd0/0x170 [<80483148>] clk_register+0x3c/0x7c [<80483b4c>] clk_register_fixed_rate+0x88/0xd8 [<80483c04>] of_fixed_clk_setup+0x68/0x94 [<8084c6fc>] of_clk_init+0x44/0x68 [<808202b0>] time_init+0x2c/0x38 [<8081ca14>] start_kernel+0x1e4/0x368 [<10008074>] 0x10008074 } ... key at: [<808afebc>] prepare_lock+0x38/0x48 ... acquired at: [<8005eb94>] check_usage+0x404/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c stack backtrace: CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285 Workqueue: kmmcd mmc_rescan Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0) r5:80979940 r4:bfa29b44 [<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8) [<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc) r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0 [<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84) [<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0) r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08 [<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4) [<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64) r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128 [<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4) r5:bf0e9aa8 r4:bf0e9c40 [<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498) [<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720) r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40 r3:00000000 [<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c) r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8 r4:bf0e9800 [<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60) r5:03197500 r4:bf0e9800 [<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14) r5:00000000 r4:bf0e9800 [<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520) [<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194) [<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0) r5:8065f358 r4:bf0e9af8 [<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468) r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00 r3:8044d774 [<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0) [<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0) [<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00 Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:53 +07:00
unsigned int host_clock = pltfm_host->clock;
int pre_div = 2;
int div = 1;
u32 temp, val;
if (clock == 0) {
if (esdhc_is_usdhc(imx_data)) {
val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
}
goto out;
}
if (esdhc_is_usdhc(imx_data) && !imx_data->is_ddr)
pre_div = 1;
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
| ESDHC_CLOCK_MASK);
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
while (host_clock / pre_div / 16 > clock && pre_div < 256)
pre_div *= 2;
while (host_clock / pre_div / div > clock && div < 16)
div++;
host->mmc->actual_clock = host_clock / pre_div / div;
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->mmc->actual_clock);
if (imx_data->is_ddr)
pre_div >>= 2;
else
pre_div >>= 1;
div--;
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
| (div << ESDHC_DIVIDER_SHIFT)
| (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
if (esdhc_is_usdhc(imx_data)) {
val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
}
mdelay(1);
out:
host->clock = clock;
}
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
switch (boarddata->wp_type) {
case ESDHC_WP_GPIO:
return mmc_gpio_get_ro(host->mmc);
case ESDHC_WP_CONTROLLER:
return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
SDHCI_WRITE_PROTECT);
case ESDHC_WP_NONE:
break;
}
return -ENOSYS;
}
static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
{
u32 ctrl;
switch (width) {
case MMC_BUS_WIDTH_8:
ctrl = ESDHC_CTRL_8BITBUS;
break;
case MMC_BUS_WIDTH_4:
ctrl = ESDHC_CTRL_4BITBUS;
break;
default:
ctrl = 0;
break;
}
esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl,
SDHCI_HOST_CONTROL);
return 0;
}
static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
{
u32 reg;
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
writel(val << 8, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
dev_dbg(mmc_dev(host->mmc),
"tunning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n",
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
static void esdhc_request_done(struct mmc_request *mrq)
{
complete(&mrq->completion);
}
static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode)
{
struct mmc_command cmd = {0};
struct mmc_request mrq = {NULL};
struct mmc_data data = {0};
struct scatterlist sg;
char tuning_pattern[ESDHC_TUNING_BLOCK_PATTERN_LEN];
cmd.opcode = opcode;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
sg_init_one(&sg, tuning_pattern, sizeof(tuning_pattern));
mrq.cmd = &cmd;
mrq.cmd->mrq = &mrq;
mrq.data = &data;
mrq.data->mrq = &mrq;
mrq.cmd->data = mrq.data;
mrq.done = esdhc_request_done;
init_completion(&(mrq.completion));
disable_irq(host->irq);
spin_lock(&host->lock);
host->mrq = &mrq;
sdhci_send_command(host, mrq.cmd);
spin_unlock(&host->lock);
enable_irq(host->irq);
wait_for_completion(&mrq.completion);
if (cmd.error)
return cmd.error;
if (data.error)
return data.error;
return 0;
}
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg &= ~ESDHC_MIX_CTRL_EXE_TUNE;
writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
}
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
int min, max, avg, ret;
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
if (!esdhc_send_tuning_cmd(host, opcode))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
/* find the maxinum delay which can not pass tuning */
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
if (esdhc_send_tuning_cmd(host, opcode)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
max += ESDHC_TUNE_CTRL_STEP;
}
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
ret = esdhc_send_tuning_cmd(host, opcode);
esdhc_post_tuning(host);
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
return ret;
}
static int esdhc_change_pinstate(struct sdhci_host *host,
unsigned int uhs)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct pinctrl_state *pinctrl;
dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs);
if (IS_ERR(imx_data->pinctrl) ||
IS_ERR(imx_data->pins_default) ||
IS_ERR(imx_data->pins_100mhz) ||
IS_ERR(imx_data->pins_200mhz))
return -EINVAL;
switch (uhs) {
case MMC_TIMING_UHS_SDR50:
pinctrl = imx_data->pins_100mhz;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
pinctrl = imx_data->pins_200mhz;
break;
default:
/* back to default state for other legacy timing */
pinctrl = imx_data->pins_default;
}
return pinctrl_select_state(imx_data->pinctrl, pinctrl);
}
static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
switch (uhs) {
case MMC_TIMING_UHS_SDR12:
imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR12;
break;
case MMC_TIMING_UHS_SDR25:
imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR25;
break;
case MMC_TIMING_UHS_SDR50:
imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR50;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR104;
break;
case MMC_TIMING_UHS_DDR50:
imx_data->uhs_mode = SDHCI_CTRL_UHS_DDR50;
writel(readl(host->ioaddr + ESDHC_MIX_CTRL) |
ESDHC_MIX_CTRL_DDREN,
host->ioaddr + ESDHC_MIX_CTRL);
imx_data->is_ddr = 1;
if (boarddata->delay_line) {
u32 v;
v = boarddata->delay_line <<
ESDHC_DLL_OVERRIDE_VAL_SHIFT |
(1 << ESDHC_DLL_OVERRIDE_EN_SHIFT);
if (is_imx53_esdhc(imx_data))
v <<= 1;
writel(v, host->ioaddr + ESDHC_DLL_CTRL);
}
break;
}
return esdhc_change_pinstate(host, uhs);
}
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl_le,
.read_w = esdhc_readw_le,
.write_l = esdhc_writel_le,
.write_w = esdhc_writew_le,
.write_b = esdhc_writeb_le,
.set_clock = esdhc_pltfm_set_clock,
.get_max_clock = esdhc_pltfm_get_max_clock,
.get_min_clock = esdhc_pltfm_get_min_clock,
.get_ro = esdhc_pltfm_get_ro,
.platform_bus_width = esdhc_pltfm_bus_width,
.set_uhs_signaling = esdhc_set_uhs_signaling,
};
static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
| SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
.ops = &sdhci_esdhc_ops,
};
#ifdef CONFIG_OF
static int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct esdhc_platform_data *boarddata)
{
struct device_node *np = pdev->dev.of_node;
if (!np)
return -ENODEV;
if (of_get_property(np, "non-removable", NULL))
boarddata->cd_type = ESDHC_CD_PERMANENT;
if (of_get_property(np, "fsl,cd-controller", NULL))
boarddata->cd_type = ESDHC_CD_CONTROLLER;
if (of_get_property(np, "fsl,wp-controller", NULL))
boarddata->wp_type = ESDHC_WP_CONTROLLER;
boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
if (gpio_is_valid(boarddata->cd_gpio))
boarddata->cd_type = ESDHC_CD_GPIO;
boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
if (gpio_is_valid(boarddata->wp_gpio))
boarddata->wp_type = ESDHC_WP_GPIO;
of_property_read_u32(np, "bus-width", &boarddata->max_bus_width);
of_property_read_u32(np, "max-frequency", &boarddata->f_max);
if (of_find_property(np, "no-1-8-v", NULL))
boarddata->support_vsel = false;
else
boarddata->support_vsel = true;
if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
boarddata->delay_line = 0;
return 0;
}
#else
static inline int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct esdhc_platform_data *boarddata)
{
return -ENODEV;
}
#endif
static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_host *host;
struct esdhc_platform_data *boarddata;
int err;
struct pltfm_imx_data *imx_data;
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0);
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
imx_data = devm_kzalloc(&pdev->dev, sizeof(*imx_data), GFP_KERNEL);
if (!imx_data) {
err = -ENOMEM;
goto free_sdhci;
}
imx_data->socdata = of_id ? of_id->data : (struct esdhc_soc_data *)
pdev->id_entry->driver_data;
pltfm_host->priv = imx_data;
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(imx_data->clk_ipg)) {
err = PTR_ERR(imx_data->clk_ipg);
goto free_sdhci;
}
imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(imx_data->clk_ahb)) {
err = PTR_ERR(imx_data->clk_ahb);
goto free_sdhci;
}
imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(imx_data->clk_per)) {
err = PTR_ERR(imx_data->clk_per);
goto free_sdhci;
}
pltfm_host->clk = imx_data->clk_per;
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context Sometimes we may meet the following lockdep issue. The root cause is .set_clock callback is executed with spin_lock_irqsave in sdhci_do_set_ios. However, the IMX set_clock callback will try to access clk_get_rate which is using a mutex lock. The fix avoids access mutex in .set_clock callback by initializing the pltfm_host->clock at probe time and use it later instead of calling clk_get_rate again in atomic context. [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.13.0-rc1+ #285 Not tainted ------------------------------------------------------ kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4 and this task is already holding: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 which would create a new lock dependency: (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&host->lock)->rlock#2){-.-...} ... which became HARDIRQ-irq-safe at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c to a HARDIRQ-irq-unsafe lock: (prepare_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable(); lock(&(&host->lock)->rlock#2); lock(prepare_lock); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 3 locks held by kworker/u8:1/29: #0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468 #2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720 the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&host->lock)->rlock#2){-.-...} ops: 330 { IN-HARDIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060760>] __lock_acquire+0xb30/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d2f0>] _raw_spin_lock+0x30/0x40 [<80460668>] sdhci_irq+0x24/0xa68 [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c [<8006b350>] handle_irq_event+0x44/0x64 [<8006e50c>] handle_fasteoi_irq+0xa0/0x170 [<8006a8f0>] generic_handle_irq+0x30/0x44 [<8000f238>] handle_IRQ+0x54/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c IN-SOFTIRQ-W at: [<8005f030>] mark_lock+0x140/0x6ac [<80060204>] __lock_acquire+0x5d4/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120 [<8002b538>] tasklet_action+0xa0/0x15c [<8002b778>] __do_softirq+0x118/0x290 [<8002bcf4>] irq_exit+0xb4/0x10c [<8000f240>] handle_IRQ+0x5c/0xbc [<8000864c>] gic_handle_irq+0x30/0x64 [<80013024>] __irq_svc+0x44/0x5c [<80614c58>] printk+0x38/0x40 [<804622a8>] sdhci_add_host+0x844/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54 [<804611f4>] sdhci_do_set_ios+0x20/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044cea0>] mmc_power_up+0x6c/0xd0 [<8044dac4>] mmc_start_host+0x60/0x70 [<8044eb3c>] mmc_add_host+0x60/0x88 [<8046225c>] sdhci_add_host+0x7f8/0xbcc [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c [<8032ee88>] platform_drv_probe+0x20/0x50 [<8032d48c>] driver_probe_device+0x118/0x234 [<8032d690>] __driver_attach+0x9c/0xa0 [<8032b89c>] bus_for_each_dev+0x68/0x9c [<8032cf44>] driver_attach+0x20/0x28 [<8032cbc8>] bus_add_driver+0x148/0x1f4 [<8032dce0>] driver_register+0x80/0x100 [<8032ee54>] __platform_driver_register+0x50/0x64 [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c } ... key at: [<80e040e8>] __key.26952+0x0/0x8 ... acquired at: [<8005eb60>] check_usage+0x3d0/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (prepare_lock){+.+...} ops: 395 { HARDIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c SOFTIRQ-ON-W at: [<8005f030>] mark_lock+0x140/0x6ac [<8005f604>] mark_held_locks+0x68/0x12c [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8 [<8005f8b4>] trace_hardirqs_on+0x14/0x18 [<8061a130>] mutex_trylock+0x180/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<804816a4>] clk_notifier_register+0x28/0xf0 [<80015120>] twd_clk_init+0x50/0x68 [<80008980>] do_one_initcall+0x108/0x16c [<8081cca4>] kernel_init_freeable+0x10c/0x1d0 [<80611c50>] kernel_init+0x10/0x120 [<8000e9c8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<8005f030>] mark_lock+0x140/0x6ac [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a0c8>] mutex_trylock+0x118/0x20c [<80480ad8>] clk_prepare_lock+0x14/0xe4 [<80482af8>] __clk_init+0x1c/0x45c [<8048306c>] _clk_register+0xd0/0x170 [<80483148>] clk_register+0x3c/0x7c [<80483b4c>] clk_register_fixed_rate+0x88/0xd8 [<80483c04>] of_fixed_clk_setup+0x68/0x94 [<8084c6fc>] of_clk_init+0x44/0x68 [<808202b0>] time_init+0x2c/0x38 [<8081ca14>] start_kernel+0x1e4/0x368 [<10008074>] 0x10008074 } ... key at: [<808afebc>] prepare_lock+0x38/0x48 ... acquired at: [<8005eb94>] check_usage+0x404/0x5c0 [<8005edac>] check_irq_usage+0x5c/0xb8 [<80060d38>] __lock_acquire+0x1108/0x1cbc [<800620d0>] lock_acquire+0x70/0x84 [<8061a210>] mutex_lock_nested+0x54/0x3c0 [<80480b08>] clk_prepare_lock+0x44/0xe4 [<8048188c>] clk_get_rate+0x14/0x64 [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4 [<8045d70c>] sdhci_set_clock+0x4c/0x498 [<80461518>] sdhci_do_set_ios+0x344/0x720 [<80461924>] sdhci_set_ios+0x30/0x3c [<8044c390>] __mmc_set_clock+0x44/0x60 [<8044cd4c>] mmc_set_clock+0x10/0x14 [<8044f8f4>] mmc_init_card+0x1b4/0x1520 [<80450f00>] mmc_attach_mmc+0xb4/0x194 [<8044da08>] mmc_rescan+0x294/0x2f0 [<8003db94>] process_one_work+0x1a4/0x468 [<8003e850>] worker_thread+0x118/0x3e0 [<80044de0>] kthread+0xd4/0xf0 [<8000e9c8>] ret_from_fork+0x14/0x2c stack backtrace: CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285 Workqueue: kmmcd mmc_rescan Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0) r5:80979940 r4:bfa29b44 [<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8) [<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc) r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0 [<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84) [<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0) r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08 [<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4) [<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64) r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128 [<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4) r5:bf0e9aa8 r4:bf0e9c40 [<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498) [<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720) r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40 r3:00000000 [<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c) r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8 r4:bf0e9800 [<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60) r5:03197500 r4:bf0e9800 [<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14) r5:00000000 r4:bf0e9800 [<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520) [<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194) [<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0) r5:8065f358 r4:bf0e9af8 [<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468) r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00 r3:8044d774 [<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0) [<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0) [<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00 Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:53 +07:00
pltfm_host->clock = clk_get_rate(pltfm_host->clk);
clk_prepare_enable(imx_data->clk_per);
clk_prepare_enable(imx_data->clk_ipg);
clk_prepare_enable(imx_data->clk_ahb);
imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(imx_data->pinctrl)) {
err = PTR_ERR(imx_data->pinctrl);
goto disable_clk;
}
imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(imx_data->pins_default)) {
err = PTR_ERR(imx_data->pins_default);
dev_err(mmc_dev(host->mmc), "could not get default state\n");
goto disable_clk;
}
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
if (imx_data->socdata->flags & ESDHC_FLAG_ENGCM07207)
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
| SDHCI_QUIRK_BROKEN_ADMA;
/*
* The imx6q ROM code will change the default watermark level setting
* to something insane. Change it back here.
*/
if (esdhc_is_usdhc(imx_data)) {
writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
host->mmc->caps |= MMC_CAP_1_8V_DDR;
}
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
sdhci_esdhc_ops.platform_execute_tuning =
esdhc_executing_tuning;
if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
writel(readl(host->ioaddr + ESDHC_TUNING_CTRL) |
ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP,
host->ioaddr + ESDHC_TUNING_CTRL);
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {
dev_err(mmc_dev(host->mmc), "no board data!\n");
err = -EINVAL;
goto disable_clk;
}
imx_data->boarddata = *((struct esdhc_platform_data *)
host->mmc->parent->platform_data);
}
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
goto disable_clk;
}
host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
}
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
goto disable_clk;
}
/* fall through */
case ESDHC_CD_CONTROLLER:
/* we have a working card_detect back */
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
break;
case ESDHC_CD_PERMANENT:
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
break;
case ESDHC_CD_NONE:
break;
}
switch (boarddata->max_bus_width) {
case 8:
host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
break;
case 4:
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
default:
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
break;
}
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_200MHZ);
if (IS_ERR(imx_data->pins_100mhz) ||
IS_ERR(imx_data->pins_200mhz)) {
dev_warn(mmc_dev(host->mmc),
"could not get ultra high speed state, work on normal mode\n");
/* fall back to not support uhs by specify no 1.8v quirk */
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
} else {
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
err = sdhci_add_host(host);
if (err)
goto disable_clk;
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
pm_suspend_ignore_children(&pdev->dev, 1);
return 0;
disable_clk:
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
free_sdhci:
sdhci_pltfm_free(pdev);
return err;
}
static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
sdhci_remove_host(host, dead);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
mmc: sdhci-esdhc-imx: fix warning during module remove function Since the clock is managed by runtime pm currently, we do not need disable it again during driver remove function, or it will cause clock disable count mismatch issue since the clocks have already been disabled. The issue can be simply reproduced by unbind the devices via sysfs. mx6slevk:/sys/bus/platform/drivers/sdhci-esdhc-imx# echo 2194000.usdhc > unbind mmc1: card aaaa removed ------------[ cut here ]------------ WARNING: CPU: 0 PID: 657 at drivers/clk/clk.c:842 __clk_disable+0x68/0x88() Modules linked in: CPU: 0 PID: 657 Comm: sh Not tainted 3.13.0-rc1+ #285 Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:80481370 r5:00000000 r4:8088ecc8 r3:00000000 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<80027158>] (warn_slowpath_common+0x70/0x94) r5:00000009 r4:00000000 [<800270e8>] (warn_slowpath_common+0x0/0x94) from [<80027220>] (warn_slowpath_null+0x24/0x2c) r8:bec4ff78 r7:0000000e r6:bf91d800 r5:bf81d080 r4:bf81d080 [<800271fc>] (warn_slowpath_null+0x0/0x2c) from [<80481370>] (__clk_disable+0x68/0x88) [<80481308>] (__clk_disable+0x0/0x88) from [<8048148c>] (clk_disable+0x20/0x2c) r4:200f0113 r3:bf95ec00 [<8048146c>] (clk_disable+0x0/0x2c) from [<80463bd8>] (sdhci_esdhc_imx_remove+0x64/0xa4) r5:bf81d080 r4:bfabb010 [<80463b74>] (sdhci_esdhc_imx_remove+0x0/0xa4) from [<8032e82c>] (platform_drv_remove+0x20/0x24) r6:808ae0e0 r5:808ae0e0 r4:bf91d810 r3:80463b74 [<8032e80c>] (platform_drv_remove+0x0/0x24) from [<8032d010>] (__device_release_driver+0x78/0xd0) [<8032cf98>] (__device_release_driver+0x0/0xd0) from [<8032d090>] (device_release_driver+0x28/0x34) r5:bf91d810 r4:bf91d844 [<8032d068>] (device_release_driver+0x0/0x34) from [<8032c0c8>] (unbind_store+0x80/0xc4) r5:bf91d810 r4:80899ba0 [<8032c048>] (unbind_store+0x0/0xc4) from [<8032b648>] (drv_attr_store+0x28/0x34) r7:bed73100 r6:0000000e r5:00000000 r4:8032b620 [<8032b620>] (drv_attr_store+0x0/0x34) from [<80140580>] (sysfs_write_file+0x1b0/0x1e4) [<801403d0>] (sysfs_write_file+0x0/0x1e4) from [<800dcda0>] (vfs_write+0xb4/0x190) [<800dccec>] (vfs_write+0x0/0x190) from [<800dd3e4>] (SyS_write+0x44/0x80) r9:0000000e r8:00000000 r7:01a00408 r6:bf3b1c00 r5:00000000 r4:00000000 [<800dd3a0>] (SyS_write+0x0/0x80) from [<8000e900>] (ret_fast_syscall+0x0/0x48) r9:bec4e000 r8:8000eac4 r7:00000004 r6:76f5fb40 r5:01a00408 r4:0000000e ---[ end trace a0897d268e6233b2 ]--- If without runtime pm, we just run as before to match the clock enable in probe function. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2013-12-26 14:23:54 +07:00
if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
}
sdhci_pltfm_free(pdev);
return 0;
}
#ifdef CONFIG_PM_RUNTIME
static int sdhci_esdhc_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
int ret;
ret = sdhci_runtime_suspend_host(host);
if (!sdhci_sdio_irq_enabled(host)) {
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
}
clk_disable_unprepare(imx_data->clk_ahb);
return ret;
}
static int sdhci_esdhc_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
if (!sdhci_sdio_irq_enabled(host)) {
clk_prepare_enable(imx_data->clk_per);
clk_prepare_enable(imx_data->clk_ipg);
}
clk_prepare_enable(imx_data->clk_ahb);
return sdhci_runtime_resume_host(host);
}
#endif
static const struct dev_pm_ops sdhci_esdhc_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
sdhci_esdhc_runtime_resume, NULL)
};
static struct platform_driver sdhci_esdhc_imx_driver = {
.driver = {
.name = "sdhci-esdhc-imx",
.owner = THIS_MODULE,
.of_match_table = imx_esdhc_dt_ids,
.pm = &sdhci_esdhc_pmops,
},
.id_table = imx_esdhc_devtype,
.probe = sdhci_esdhc_imx_probe,
.remove = sdhci_esdhc_imx_remove,
};
module_platform_driver(sdhci_esdhc_imx_driver);
MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
MODULE_LICENSE("GPL v2");