linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_ddi.c

4283 lines
128 KiB
C
Raw Normal View History

/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include <drm/drm_scdc_helper.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
struct ddi_buf_trans {
u32 trans1; /* balance leg enable, de-emph level */
u32 trans2; /* vref sel, vswing */
u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */
};
static const u8 index_to_dp_signal_levels[] = {
[0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0,
[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1,
[2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2,
[3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3,
[4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0,
[5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1,
[6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2,
[7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0,
[8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1,
[9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0,
};
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
* automatically adapt to HDMI connections as well
*/
static const struct ddi_buf_trans hsw_ddi_translations_dp[] = {
{ 0x00FFFFFF, 0x0006000E, 0x0 },
{ 0x00D75FFF, 0x0005000A, 0x0 },
{ 0x00C30FFF, 0x00040006, 0x0 },
{ 0x80AAAFFF, 0x000B0000, 0x0 },
{ 0x00FFFFFF, 0x0005000A, 0x0 },
{ 0x00D75FFF, 0x000C0004, 0x0 },
{ 0x80C30FFF, 0x000B0000, 0x0 },
{ 0x00FFFFFF, 0x00040006, 0x0 },
{ 0x80D75FFF, 0x000B0000, 0x0 },
};
static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = {
{ 0x00FFFFFF, 0x0007000E, 0x0 },
{ 0x00D75FFF, 0x000F000A, 0x0 },
{ 0x00C30FFF, 0x00060006, 0x0 },
{ 0x00AAAFFF, 0x001E0000, 0x0 },
{ 0x00FFFFFF, 0x000F000A, 0x0 },
{ 0x00D75FFF, 0x00160004, 0x0 },
{ 0x00C30FFF, 0x001E0000, 0x0 },
{ 0x00FFFFFF, 0x00060006, 0x0 },
{ 0x00D75FFF, 0x001E0000, 0x0 },
};
static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = {
/* Idx NT mV d T mV d db */
{ 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */
{ 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */
{ 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */
{ 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */
{ 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */
{ 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */
{ 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */
{ 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */
{ 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */
{ 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */
{ 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */
{ 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */
};
static const struct ddi_buf_trans bdw_ddi_translations_edp[] = {
{ 0x00FFFFFF, 0x00000012, 0x0 },
{ 0x00EBAFFF, 0x00020011, 0x0 },
{ 0x00C71FFF, 0x0006000F, 0x0 },
{ 0x00AAAFFF, 0x000E000A, 0x0 },
{ 0x00FFFFFF, 0x00020011, 0x0 },
{ 0x00DB6FFF, 0x0005000F, 0x0 },
{ 0x00BEEFFF, 0x000A000C, 0x0 },
{ 0x00FFFFFF, 0x0005000F, 0x0 },
{ 0x00DB6FFF, 0x000A000C, 0x0 },
};
static const struct ddi_buf_trans bdw_ddi_translations_dp[] = {
{ 0x00FFFFFF, 0x0007000E, 0x0 },
{ 0x00D75FFF, 0x000E000A, 0x0 },
{ 0x00BEFFFF, 0x00140006, 0x0 },
{ 0x80B2CFFF, 0x001B0002, 0x0 },
{ 0x00FFFFFF, 0x000E000A, 0x0 },
{ 0x00DB6FFF, 0x00160005, 0x0 },
{ 0x80C71FFF, 0x001A0002, 0x0 },
{ 0x00F7DFFF, 0x00180004, 0x0 },
{ 0x80D75FFF, 0x001B0002, 0x0 },
};
static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = {
{ 0x00FFFFFF, 0x0001000E, 0x0 },
{ 0x00D75FFF, 0x0004000A, 0x0 },
{ 0x00C30FFF, 0x00070006, 0x0 },
{ 0x00AAAFFF, 0x000C0000, 0x0 },
{ 0x00FFFFFF, 0x0004000A, 0x0 },
{ 0x00D75FFF, 0x00090004, 0x0 },
{ 0x00C30FFF, 0x000C0000, 0x0 },
{ 0x00FFFFFF, 0x00070006, 0x0 },
{ 0x00D75FFF, 0x000C0000, 0x0 },
};
static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = {
/* Idx NT mV d T mV df db */
{ 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */
{ 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */
{ 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */
{ 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */
{ 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */
{ 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */
{ 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */
{ 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */
{ 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */
{ 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */
};
/* Skylake H and S */
static const struct ddi_buf_trans skl_ddi_translations_dp[] = {
{ 0x00002016, 0x000000A0, 0x0 },
{ 0x00005012, 0x0000009B, 0x0 },
{ 0x00007011, 0x00000088, 0x0 },
{ 0x80009010, 0x000000C0, 0x1 },
{ 0x00002016, 0x0000009B, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000C0, 0x1 },
{ 0x00002016, 0x000000DF, 0x0 },
{ 0x80005012, 0x000000C0, 0x1 },
};
/* Skylake U */
static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = {
{ 0x0000201B, 0x000000A2, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000CD, 0x1 },
{ 0x80009010, 0x000000C0, 0x1 },
{ 0x0000201B, 0x0000009D, 0x0 },
{ 0x80005012, 0x000000C0, 0x1 },
{ 0x80007011, 0x000000C0, 0x1 },
{ 0x00002016, 0x00000088, 0x0 },
{ 0x80005012, 0x000000C0, 0x1 },
};
/* Skylake Y */
static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = {
{ 0x00000018, 0x000000A2, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000CD, 0x3 },
{ 0x80009010, 0x000000C0, 0x3 },
{ 0x00000018, 0x0000009D, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
{ 0x80007011, 0x000000C0, 0x3 },
{ 0x00000018, 0x00000088, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
};
/* Kabylake H and S */
static const struct ddi_buf_trans kbl_ddi_translations_dp[] = {
{ 0x00002016, 0x000000A0, 0x0 },
{ 0x00005012, 0x0000009B, 0x0 },
{ 0x00007011, 0x00000088, 0x0 },
{ 0x80009010, 0x000000C0, 0x1 },
{ 0x00002016, 0x0000009B, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000C0, 0x1 },
{ 0x00002016, 0x00000097, 0x0 },
{ 0x80005012, 0x000000C0, 0x1 },
};
/* Kabylake U */
static const struct ddi_buf_trans kbl_u_ddi_translations_dp[] = {
{ 0x0000201B, 0x000000A1, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000CD, 0x3 },
{ 0x80009010, 0x000000C0, 0x3 },
{ 0x0000201B, 0x0000009D, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
{ 0x80007011, 0x000000C0, 0x3 },
{ 0x00002016, 0x0000004F, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
};
/* Kabylake Y */
static const struct ddi_buf_trans kbl_y_ddi_translations_dp[] = {
{ 0x00001017, 0x000000A1, 0x0 },
{ 0x00005012, 0x00000088, 0x0 },
{ 0x80007011, 0x000000CD, 0x3 },
{ 0x8000800F, 0x000000C0, 0x3 },
{ 0x00001017, 0x0000009D, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
{ 0x80007011, 0x000000C0, 0x3 },
{ 0x00001017, 0x0000004C, 0x0 },
{ 0x80005012, 0x000000C0, 0x3 },
};
/*
* Skylake/Kabylake H and S
* eDP 1.4 low vswing translation parameters
*/
static const struct ddi_buf_trans skl_ddi_translations_edp[] = {
{ 0x00000018, 0x000000A8, 0x0 },
{ 0x00004013, 0x000000A9, 0x0 },
{ 0x00007011, 0x000000A2, 0x0 },
{ 0x00009010, 0x0000009C, 0x0 },
{ 0x00000018, 0x000000A9, 0x0 },
{ 0x00006013, 0x000000A2, 0x0 },
{ 0x00007011, 0x000000A6, 0x0 },
{ 0x00000018, 0x000000AB, 0x0 },
{ 0x00007013, 0x0000009F, 0x0 },
{ 0x00000018, 0x000000DF, 0x0 },
};
/*
* Skylake/Kabylake U
* eDP 1.4 low vswing translation parameters
*/
static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = {
{ 0x00000018, 0x000000A8, 0x0 },
{ 0x00004013, 0x000000A9, 0x0 },
{ 0x00007011, 0x000000A2, 0x0 },
{ 0x00009010, 0x0000009C, 0x0 },
{ 0x00000018, 0x000000A9, 0x0 },
{ 0x00006013, 0x000000A2, 0x0 },
{ 0x00007011, 0x000000A6, 0x0 },
{ 0x00002016, 0x000000AB, 0x0 },
{ 0x00005013, 0x0000009F, 0x0 },
{ 0x00000018, 0x000000DF, 0x0 },
};
/*
* Skylake/Kabylake Y
* eDP 1.4 low vswing translation parameters
*/
static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = {
{ 0x00000018, 0x000000A8, 0x0 },
{ 0x00004013, 0x000000AB, 0x0 },
{ 0x00007011, 0x000000A4, 0x0 },
{ 0x00009010, 0x000000DF, 0x0 },
{ 0x00000018, 0x000000AA, 0x0 },
{ 0x00006013, 0x000000A4, 0x0 },
{ 0x00007011, 0x0000009D, 0x0 },
{ 0x00000018, 0x000000A0, 0x0 },
{ 0x00006012, 0x000000DF, 0x0 },
{ 0x00000018, 0x0000008A, 0x0 },
};
/* Skylake/Kabylake U, H and S */
static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = {
{ 0x00000018, 0x000000AC, 0x0 },
{ 0x00005012, 0x0000009D, 0x0 },
{ 0x00007011, 0x00000088, 0x0 },
{ 0x00000018, 0x000000A1, 0x0 },
{ 0x00000018, 0x00000098, 0x0 },
{ 0x00004013, 0x00000088, 0x0 },
{ 0x80006012, 0x000000CD, 0x1 },
{ 0x00000018, 0x000000DF, 0x0 },
{ 0x80003015, 0x000000CD, 0x1 }, /* Default */
{ 0x80003015, 0x000000C0, 0x1 },
{ 0x80000018, 0x000000C0, 0x1 },
};
/* Skylake/Kabylake Y */
static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = {
{ 0x00000018, 0x000000A1, 0x0 },
{ 0x00005012, 0x000000DF, 0x0 },
{ 0x80007011, 0x000000CB, 0x3 },
{ 0x00000018, 0x000000A4, 0x0 },
{ 0x00000018, 0x0000009D, 0x0 },
{ 0x00004013, 0x00000080, 0x0 },
{ 0x80006013, 0x000000C0, 0x3 },
{ 0x00000018, 0x0000008A, 0x0 },
{ 0x80003015, 0x000000C0, 0x3 }, /* Default */
{ 0x80003015, 0x000000C0, 0x3 },
{ 0x80000018, 0x000000C0, 0x3 },
};
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
struct bxt_ddi_buf_trans {
u8 margin; /* swing value */
u8 scale; /* scale value */
u8 enable; /* scale enable */
u8 deemphasis;
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
};
static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = {
/* Idx NT mV diff db */
{ 52, 0x9A, 0, 128, }, /* 0: 400 0 */
{ 78, 0x9A, 0, 85, }, /* 1: 400 3.5 */
{ 104, 0x9A, 0, 64, }, /* 2: 400 6 */
{ 154, 0x9A, 0, 43, }, /* 3: 400 9.5 */
{ 77, 0x9A, 0, 128, }, /* 4: 600 0 */
{ 116, 0x9A, 0, 85, }, /* 5: 600 3.5 */
{ 154, 0x9A, 0, 64, }, /* 6: 600 6 */
{ 102, 0x9A, 0, 128, }, /* 7: 800 0 */
{ 154, 0x9A, 0, 85, }, /* 8: 800 3.5 */
{ 154, 0x9A, 1, 128, }, /* 9: 1200 0 */
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
};
static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = {
/* Idx NT mV diff db */
{ 26, 0, 0, 128, }, /* 0: 200 0 */
{ 38, 0, 0, 112, }, /* 1: 200 1.5 */
{ 48, 0, 0, 96, }, /* 2: 200 4 */
{ 54, 0, 0, 69, }, /* 3: 200 6 */
{ 32, 0, 0, 128, }, /* 4: 250 0 */
{ 48, 0, 0, 104, }, /* 5: 250 1.5 */
{ 54, 0, 0, 85, }, /* 6: 250 4 */
{ 43, 0, 0, 128, }, /* 7: 300 0 */
{ 54, 0, 0, 101, }, /* 8: 300 1.5 */
{ 48, 0, 0, 128, }, /* 9: 300 0 */
};
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
/* BSpec has 2 recommended values - entries 0 and 8.
* Using the entry with higher vswing.
*/
static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = {
/* Idx NT mV diff db */
{ 52, 0x9A, 0, 128, }, /* 0: 400 0 */
{ 52, 0x9A, 0, 85, }, /* 1: 400 3.5 */
{ 52, 0x9A, 0, 64, }, /* 2: 400 6 */
{ 42, 0x9A, 0, 43, }, /* 3: 400 9.5 */
{ 77, 0x9A, 0, 128, }, /* 4: 600 0 */
{ 77, 0x9A, 0, 85, }, /* 5: 600 3.5 */
{ 77, 0x9A, 0, 64, }, /* 6: 600 6 */
{ 102, 0x9A, 0, 128, }, /* 7: 800 0 */
{ 102, 0x9A, 0, 85, }, /* 8: 800 3.5 */
{ 154, 0x9A, 1, 128, }, /* 9: 1200 0 */
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
};
struct cnl_ddi_buf_trans {
u8 dw2_swing_sel;
u8 dw7_n_scalar;
u8 dw4_cursor_coeff;
u8 dw4_post_cursor_2;
u8 dw4_post_cursor_1;
};
/* Voltage Swing Programming for VccIO 0.85V for DP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_85V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
{ 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */
{ 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */
{ 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */
{ 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
{ 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */
{ 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */
{ 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */
{ 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */
{ 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
};
/* Voltage Swing Programming for VccIO 0.85V for HDMI */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_85V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
{ 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */
{ 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */
{ 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 */
{ 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */
{ 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
};
/* Voltage Swing Programming for VccIO 0.85V for eDP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x66, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
{ 0xA, 0x66, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
{ 0xB, 0x70, 0x3C, 0x00, 0x03 }, /* 460 600 2.3 */
{ 0xC, 0x75, 0x3C, 0x00, 0x03 }, /* 537 700 2.3 */
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
};
/* Voltage Swing Programming for VccIO 0.95V for DP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_95V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
{ 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */
{ 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */
{ 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */
{ 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
{ 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */
{ 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */
{ 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */
{ 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */
{ 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
};
/* Voltage Swing Programming for VccIO 0.95V for HDMI */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_95V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x5C, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
{ 0xB, 0x69, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
{ 0x5, 0x76, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
{ 0xA, 0x5E, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
{ 0xB, 0x69, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
{ 0xB, 0x79, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
{ 0x6, 0x7D, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */
{ 0x5, 0x76, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */
{ 0x6, 0x7D, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */
{ 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
};
/* Voltage Swing Programming for VccIO 0.95V for eDP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_95V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x61, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
{ 0xA, 0x61, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
{ 0xB, 0x68, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */
{ 0xC, 0x6E, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */
{ 0x4, 0x7F, 0x3A, 0x00, 0x05 }, /* 460 600 2.3 */
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
};
/* Voltage Swing Programming for VccIO 1.05V for DP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_1_05V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
{ 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
{ 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
{ 0x6, 0x7F, 0x2C, 0x00, 0x13 }, /* 400 1050 8.4 */
{ 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
{ 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
{ 0x6, 0x7F, 0x30, 0x00, 0x0F }, /* 550 1050 5.6 */
{ 0x5, 0x76, 0x3E, 0x00, 0x01 }, /* 850 900 0.5 */
{ 0x6, 0x7F, 0x36, 0x00, 0x09 }, /* 750 1050 2.9 */
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
};
/* Voltage Swing Programming for VccIO 1.05V for HDMI */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_1_05V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
{ 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
{ 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
{ 0xA, 0x5B, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
{ 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
{ 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
{ 0x6, 0x7C, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */
{ 0x5, 0x70, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */
{ 0x6, 0x7C, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */
{ 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
};
/* Voltage Swing Programming for VccIO 1.05V for eDP */
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = {
/* NT mV Trans mV db */
{ 0xA, 0x5E, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
{ 0xA, 0x5E, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
{ 0xB, 0x64, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */
{ 0xE, 0x6A, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
};
struct icl_combo_phy_ddi_buf_trans {
u32 dw2_swing_select;
u32 dw2_swing_scalar;
u32 dw4_scaling;
};
/* Voltage Swing Programming for VccIO 0.85V for DP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
/* Voltage mV db */
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
{ 0xB, 0x70, 0x0018 }, /* 600 0.0 */
{ 0xB, 0x70, 0x3015 }, /* 600 3.5 */
{ 0xB, 0x70, 0x6012 }, /* 600 6.0 */
{ 0x5, 0x00, 0x0018 }, /* 800 0.0 */
{ 0x5, 0x00, 0x3015 }, /* 800 3.5 */
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
};
/* FIXME - After table is updated in Bspec */
/* Voltage Swing Programming for VccIO 0.85V for eDP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
/* Voltage mV db */
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
};
/* Voltage Swing Programming for VccIO 0.95V for DP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
/* Voltage mV db */
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
{ 0x4, 0x98, 0x0018 }, /* 600 0.0 */
{ 0x4, 0x98, 0x3015 }, /* 600 3.5 */
{ 0x4, 0x98, 0x6012 }, /* 600 6.0 */
{ 0x5, 0x76, 0x0018 }, /* 800 0.0 */
{ 0x5, 0x76, 0x3015 }, /* 800 3.5 */
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
};
/* FIXME - After table is updated in Bspec */
/* Voltage Swing Programming for VccIO 0.95V for eDP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
/* Voltage mV db */
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
};
/* Voltage Swing Programming for VccIO 1.05V for DP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
/* Voltage mV db */
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
{ 0x4, 0x98, 0x0018 }, /* 600 0.0 */
{ 0x4, 0x98, 0x3015 }, /* 600 3.5 */
{ 0x4, 0x98, 0x6012 }, /* 600 6.0 */
{ 0x5, 0x71, 0x0018 }, /* 800 0.0 */
{ 0x5, 0x71, 0x3015 }, /* 800 3.5 */
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
};
/* FIXME - After table is updated in Bspec */
/* Voltage Swing Programming for VccIO 1.05V for eDP */
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
/* Voltage mV db */
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
};
struct icl_mg_phy_ddi_buf_trans {
u32 cri_txdeemph_override_5_0;
u32 cri_txdeemph_override_11_6;
u32 cri_txdeemph_override_17_12;
};
static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations[] = {
/* Voltage swing pre-emphasis */
{ 0x0, 0x1B, 0x00 }, /* 0 0 */
{ 0x0, 0x23, 0x08 }, /* 0 1 */
{ 0x0, 0x2D, 0x12 }, /* 0 2 */
{ 0x0, 0x00, 0x00 }, /* 0 3 */
{ 0x0, 0x23, 0x00 }, /* 1 0 */
{ 0x0, 0x2B, 0x09 }, /* 1 1 */
{ 0x0, 0x2E, 0x11 }, /* 1 2 */
{ 0x0, 0x2F, 0x00 }, /* 2 0 */
{ 0x0, 0x33, 0x0C }, /* 2 1 */
{ 0x0, 0x00, 0x00 }, /* 3 0 */
};
static const struct ddi_buf_trans *
bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
{
if (dev_priv->vbt.edp.low_vswing) {
*n_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
return bdw_ddi_translations_edp;
} else {
*n_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
return bdw_ddi_translations_dp;
}
}
static const struct ddi_buf_trans *
skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
{
if (IS_SKL_ULX(dev_priv)) {
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp);
return skl_y_ddi_translations_dp;
} else if (IS_SKL_ULT(dev_priv)) {
*n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp);
return skl_u_ddi_translations_dp;
} else {
*n_entries = ARRAY_SIZE(skl_ddi_translations_dp);
return skl_ddi_translations_dp;
}
}
static const struct ddi_buf_trans *
kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
{
if (IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) {
*n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp);
return kbl_y_ddi_translations_dp;
} else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) {
*n_entries = ARRAY_SIZE(kbl_u_ddi_translations_dp);
return kbl_u_ddi_translations_dp;
} else {
*n_entries = ARRAY_SIZE(kbl_ddi_translations_dp);
return kbl_ddi_translations_dp;
}
}
static const struct ddi_buf_trans *
skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
{
if (dev_priv->vbt.edp.low_vswing) {
if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) {
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp);
return skl_y_ddi_translations_edp;
} else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) ||
IS_CFL_ULT(dev_priv)) {
*n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp);
return skl_u_ddi_translations_edp;
} else {
*n_entries = ARRAY_SIZE(skl_ddi_translations_edp);
return skl_ddi_translations_edp;
}
}
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv))
return kbl_get_buf_trans_dp(dev_priv, n_entries);
else
return skl_get_buf_trans_dp(dev_priv, n_entries);
}
static const struct ddi_buf_trans *
skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
{
if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) {
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi);
return skl_y_ddi_translations_hdmi;
} else {
*n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi);
return skl_ddi_translations_hdmi;
}
}
static int skl_buf_trans_num_entries(enum port port, int n_entries)
{
/* Only DDIA and DDIE can select the 10th register with DP */
if (port == PORT_A || port == PORT_E)
return min(n_entries, 10);
else
return min(n_entries, 9);
}
static const struct ddi_buf_trans *
intel_ddi_get_buf_trans_dp(struct drm_i915_private *dev_priv,
enum port port, int *n_entries)
{
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
const struct ddi_buf_trans *ddi_translations =
kbl_get_buf_trans_dp(dev_priv, n_entries);
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
return ddi_translations;
} else if (IS_SKYLAKE(dev_priv)) {
const struct ddi_buf_trans *ddi_translations =
skl_get_buf_trans_dp(dev_priv, n_entries);
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
return ddi_translations;
} else if (IS_BROADWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
return bdw_ddi_translations_dp;
} else if (IS_HASWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
return hsw_ddi_translations_dp;
}
*n_entries = 0;
return NULL;
}
static const struct ddi_buf_trans *
intel_ddi_get_buf_trans_edp(struct drm_i915_private *dev_priv,
enum port port, int *n_entries)
{
if (IS_GEN9_BC(dev_priv)) {
const struct ddi_buf_trans *ddi_translations =
skl_get_buf_trans_edp(dev_priv, n_entries);
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
return ddi_translations;
} else if (IS_BROADWELL(dev_priv)) {
return bdw_get_buf_trans_edp(dev_priv, n_entries);
} else if (IS_HASWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
return hsw_ddi_translations_dp;
}
*n_entries = 0;
return NULL;
}
static const struct ddi_buf_trans *
intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv,
int *n_entries)
{
if (IS_BROADWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(bdw_ddi_translations_fdi);
return bdw_ddi_translations_fdi;
} else if (IS_HASWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
return hsw_ddi_translations_fdi;
}
*n_entries = 0;
return NULL;
}
static const struct ddi_buf_trans *
intel_ddi_get_buf_trans_hdmi(struct drm_i915_private *dev_priv,
int *n_entries)
{
if (IS_GEN9_BC(dev_priv)) {
return skl_get_buf_trans_hdmi(dev_priv, n_entries);
} else if (IS_BROADWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
return bdw_ddi_translations_hdmi;
} else if (IS_HASWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
return hsw_ddi_translations_hdmi;
}
*n_entries = 0;
return NULL;
}
static const struct bxt_ddi_buf_trans *
bxt_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
{
*n_entries = ARRAY_SIZE(bxt_ddi_translations_dp);
return bxt_ddi_translations_dp;
}
static const struct bxt_ddi_buf_trans *
bxt_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
{
if (dev_priv->vbt.edp.low_vswing) {
*n_entries = ARRAY_SIZE(bxt_ddi_translations_edp);
return bxt_ddi_translations_edp;
}
return bxt_get_buf_trans_dp(dev_priv, n_entries);
}
static const struct bxt_ddi_buf_trans *
bxt_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
{
*n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi);
return bxt_ddi_translations_hdmi;
}
static const struct cnl_ddi_buf_trans *
cnl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
{
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
if (voltage == VOLTAGE_INFO_0_85V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_85V);
return cnl_ddi_translations_hdmi_0_85V;
} else if (voltage == VOLTAGE_INFO_0_95V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_95V);
return cnl_ddi_translations_hdmi_0_95V;
} else if (voltage == VOLTAGE_INFO_1_05V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_1_05V);
return cnl_ddi_translations_hdmi_1_05V;
} else {
*n_entries = 1; /* shut up gcc */
MISSING_CASE(voltage);
}
return NULL;
}
static const struct cnl_ddi_buf_trans *
cnl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
{
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
if (voltage == VOLTAGE_INFO_0_85V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_85V);
return cnl_ddi_translations_dp_0_85V;
} else if (voltage == VOLTAGE_INFO_0_95V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_95V);
return cnl_ddi_translations_dp_0_95V;
} else if (voltage == VOLTAGE_INFO_1_05V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_1_05V);
return cnl_ddi_translations_dp_1_05V;
} else {
*n_entries = 1; /* shut up gcc */
MISSING_CASE(voltage);
}
return NULL;
}
static const struct cnl_ddi_buf_trans *
cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
{
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
if (dev_priv->vbt.edp.low_vswing) {
if (voltage == VOLTAGE_INFO_0_85V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_85V);
return cnl_ddi_translations_edp_0_85V;
} else if (voltage == VOLTAGE_INFO_0_95V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_95V);
return cnl_ddi_translations_edp_0_95V;
} else if (voltage == VOLTAGE_INFO_1_05V) {
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_1_05V);
return cnl_ddi_translations_edp_1_05V;
} else {
*n_entries = 1; /* shut up gcc */
MISSING_CASE(voltage);
}
return NULL;
} else {
return cnl_get_buf_trans_dp(dev_priv, n_entries);
}
}
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
static const struct icl_combo_phy_ddi_buf_trans *
icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
int type, int *n_entries)
{
u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
switch (voltage) {
case VOLTAGE_INFO_0_85V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
return icl_combo_phy_ddi_translations_edp_0_85V;
case VOLTAGE_INFO_0_95V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
return icl_combo_phy_ddi_translations_edp_0_95V;
case VOLTAGE_INFO_1_05V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
return icl_combo_phy_ddi_translations_edp_1_05V;
default:
MISSING_CASE(voltage);
return NULL;
}
} else {
switch (voltage) {
case VOLTAGE_INFO_0_85V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
case VOLTAGE_INFO_0_95V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
case VOLTAGE_INFO_1_05V:
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
default:
MISSING_CASE(voltage);
return NULL;
}
}
}
static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
{
int n_entries, level, default_entry;
level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
if (IS_ICELAKE(dev_priv)) {
if (intel_port_is_combophy(dev_priv, port))
icl_get_combo_buf_trans(dev_priv, port,
INTEL_OUTPUT_HDMI, &n_entries);
else
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
default_entry = n_entries - 1;
} else if (IS_CANNONLAKE(dev_priv)) {
cnl_get_buf_trans_hdmi(dev_priv, &n_entries);
default_entry = n_entries - 1;
} else if (IS_GEN9_LP(dev_priv)) {
bxt_get_buf_trans_hdmi(dev_priv, &n_entries);
default_entry = n_entries - 1;
} else if (IS_GEN9_BC(dev_priv)) {
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
default_entry = 8;
} else if (IS_BROADWELL(dev_priv)) {
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
default_entry = 7;
} else if (IS_HASWELL(dev_priv)) {
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
default_entry = 6;
} else {
WARN(1, "ddi translation table missing\n");
return 0;
}
/* Choose a good default if VBT is badly populated */
if (level == HDMI_LEVEL_SHIFT_UNKNOWN || level >= n_entries)
level = default_entry;
if (WARN_ON_ONCE(n_entries == 0))
return 0;
if (WARN_ON_ONCE(level >= n_entries))
level = n_entries - 1;
return level;
}
/*
* Starting with Haswell, DDI port buffers must be programmed with correct
* values in advance. This function programs the correct values for
* DP/eDP/FDI use cases.
*/
static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 iboost_bit = 0;
int i, n_entries;
enum port port = encoder->port;
const struct ddi_buf_trans *ddi_translations;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
ddi_translations = intel_ddi_get_buf_trans_fdi(dev_priv,
&n_entries);
else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port,
&n_entries);
else
ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port,
&n_entries);
/* If we're boosting the current, set bit 31 of trans1 */
if (IS_GEN9_BC(dev_priv) &&
dev_priv->vbt.ddi_port_info[port].dp_boost_level)
iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE;
for (i = 0; i < n_entries; i++) {
I915_WRITE(DDI_BUF_TRANS_LO(port, i),
ddi_translations[i].trans1 | iboost_bit);
I915_WRITE(DDI_BUF_TRANS_HI(port, i),
ddi_translations[i].trans2);
}
}
/*
* Starting with Haswell, DDI port buffers must be programmed with correct
* values in advance. This function programs the correct values for
* HDMI/DVI use cases.
*/
static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder,
int level)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 iboost_bit = 0;
int n_entries;
enum port port = encoder->port;
const struct ddi_buf_trans *ddi_translations;
ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
if (WARN_ON_ONCE(!ddi_translations))
return;
if (WARN_ON_ONCE(level >= n_entries))
level = n_entries - 1;
/* If we're boosting the current, set bit 31 of trans1 */
if (IS_GEN9_BC(dev_priv) &&
dev_priv->vbt.ddi_port_info[port].hdmi_boost_level)
iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE;
/* Entry 9 is for HDMI: */
I915_WRITE(DDI_BUF_TRANS_LO(port, 9),
ddi_translations[level].trans1 | iboost_bit);
I915_WRITE(DDI_BUF_TRANS_HI(port, 9),
ddi_translations[level].trans2);
}
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
enum port port)
{
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = DDI_BUF_CTL(port);
int i;
for (i = 0; i < 16; i++) {
udelay(1);
if (I915_READ(reg) & DDI_BUF_IS_IDLE)
return;
}
DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
}
static uint32_t hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
{
switch (pll->info->id) {
case DPLL_ID_WRPLL1:
return PORT_CLK_SEL_WRPLL1;
case DPLL_ID_WRPLL2:
return PORT_CLK_SEL_WRPLL2;
case DPLL_ID_SPLL:
return PORT_CLK_SEL_SPLL;
case DPLL_ID_LCPLL_810:
return PORT_CLK_SEL_LCPLL_810;
case DPLL_ID_LCPLL_1350:
return PORT_CLK_SEL_LCPLL_1350;
case DPLL_ID_LCPLL_2700:
return PORT_CLK_SEL_LCPLL_2700;
default:
MISSING_CASE(pll->info->id);
return PORT_CLK_SEL_NONE;
}
}
static uint32_t icl_pll_to_ddi_pll_sel(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
int clock = crtc_state->port_clock;
const enum intel_dpll_id id = pll->info->id;
switch (id) {
default:
MISSING_CASE(id);
/* fall through */
case DPLL_ID_ICL_DPLL0:
case DPLL_ID_ICL_DPLL1:
return DDI_CLK_SEL_NONE;
case DPLL_ID_ICL_TBTPLL:
switch (clock) {
case 162000:
return DDI_CLK_SEL_TBT_162;
case 270000:
return DDI_CLK_SEL_TBT_270;
case 540000:
return DDI_CLK_SEL_TBT_540;
case 810000:
return DDI_CLK_SEL_TBT_810;
default:
MISSING_CASE(clock);
break;
}
case DPLL_ID_ICL_MGPLL1:
case DPLL_ID_ICL_MGPLL2:
case DPLL_ID_ICL_MGPLL3:
case DPLL_ID_ICL_MGPLL4:
return DDI_CLK_SEL_MG;
}
}
/* Starting with Haswell, different DDI ports can work in FDI mode for
* connection to the PCH-located connectors. For this, it is necessary to train
* both the DDI port and PCH receiver for the desired DDI buffer settings.
*
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_encoder *encoder;
u32 temp, i, rx_ctl_val, ddi_pll_sel;
for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
intel_prepare_dp_ddi_buffers(encoder, crtc_state);
}
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
* mode set "sequence for CRT port" document:
* - TP1 to TP2 time with the default value
* - FDI delay to 90h
*
* WaFDIAutoLinkSetTimingOverrride:hsw
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
*/
I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) |
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
FDI_RX_PWRDN_LANE0_VAL(2) |
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_RX_PLL_ENABLE |
FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
POSTING_READ(FDI_RX_CTL(PIPE_A));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
udelay(220);
/* Switch from Rawclk to PCDclk */
rx_ctl_val |= FDI_PCDCLK;
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Configure Port Clock Select */
ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel);
WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL);
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
* DDI E does not support port reversal, the functionality is
* achieved on the PCH side in FDI_RX_CTL, so no need to set the
* port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
DDI_BUF_CTL_ENABLE |
((crtc_state->fdi_lanes - 1) << 1) |
DDI_BUF_TRANS_SELECT(i / 2));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
POSTING_READ(DDI_BUF_CTL(PORT_E));
udelay(600);
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Program PCH FDI Receiver TU */
I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Enable PCH FDI Receiver with auto-training */
rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
POSTING_READ(FDI_RX_CTL(PIPE_A));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Wait for FDI receiver lane calibration */
udelay(30);
/* Unset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(FDI_RX_MISC(PIPE_A));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
I915_WRITE(FDI_RX_MISC(PIPE_A), temp);
POSTING_READ(FDI_RX_MISC(PIPE_A));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Wait for FDI auto training time */
udelay(5);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
break;
}
/*
* Leave things enabled even if we failed to train FDI.
* Results in less fireworks from the state checker.
*/
if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
DRM_ERROR("FDI link training failed!\n");
break;
}
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
drm/i915: Disable FDI RX before DDI_BUF_CTL Bspec is confused w.r.t. the HSW/BDW FDI disable sequence. It lists FDI RX disable both as step 13 and step 18 in the sequence. But I dug up an old BUN mail from Art that moved the FDI RX disable to happen before DDI_BUF_CTL disable. That BUN did not renumber the steps and just added a note: "Workaround: Disable PCH FDI Receiver before disabling DDI_BUF_CTL." The BUN described the symptoms of the fixed issue as: "PCH display underflow and a black screen on the analog CRT port that happened after a FDI re-train" I suppose later someone tried to renumber the steps to match, but forgot to remove the FDI RX disable from its old position in the sequence. They also forgot to update the note describing what should be done in case of an FDI training failure. Currently it says: "To retry FDI training, follow the Disable Sequence steps to Disable FDI, but skip the steps related to clocks and PLLs (16, 19, and 20), ..." It should really say "17, 20, and 21" with the current sequence because those are the steps that deal with PLLs and whatnot, after step 13 became FDI RX disable. And had the step 18 FDI RX disable been removed, as I suspect it should have, the note should actually say "17, 19, and 20". So, let's move the FDI RX disable to happen before DDI_BUF_CTL disable, as that would appear to be the correct order based on the BUN. Note that Art has since unconfused the spec, and so this patch should now match the steps listed in the spec. v2: Add a note that the spec is now correct Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Art Runyan <arthur.j.runyan@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456841783-4779-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2016-03-01 21:16:23 +07:00
rx_ctl_val &= ~FDI_RX_ENABLE;
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
POSTING_READ(FDI_RX_CTL(PIPE_A));
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
POSTING_READ(DDI_BUF_CTL(PORT_E));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
temp = I915_READ(DP_TP_CTL(PORT_E));
temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(PORT_E), temp);
POSTING_READ(DP_TP_CTL(PORT_E));
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
/* Reset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(FDI_RX_MISC(PIPE_A));
drm/i915: fix Haswell FDI link training code This commit makes hsw_fdi_link_train responsible for implementing everything described in the "Enable and train FDI" section from the Hawell CRT mode set sequence documentation. We completely rewrite hsw_fdi_link_train to match the documentation and we also call it in the right place. This patch was initially sent as a series of tiny patches fixing every little problem of the function, but since there were too many patches fixing the same function it got a little difficult to get the "big picture" of how the function would be in the end, so here we amended all the patches into a single big patch fixing the whole function. Problems we fixed: 1 - Train Haswell FDI at the right time. We need to train the FDI before enabling the pipes and planes, so we're moving the call from lpt_pch_enable to haswell_crtc_enable directly. We are also removing ironlake_fdi_pll_enable since the PLL enablement on Haswell is completely different and is also done during the link training steps. 2 - Use the right FDI_RX_CTL register on Haswell There is only one PCH transcoder, so it's always _FDI_RXA_CTL. Using "pipe" here is wrong. 3 - Don't rely on DDI_BUF_CTL previous values Just set the bits we want, everything else is zero. Also POSTING_READ the register before sleeping. 4 - Program the FDI RX TUSIZE register on hsw_fdi_link_train According to the mode set sequence documentation, this is the right place. According to the FDI_RX_TUSIZE register description, this is the value we should set. Also remove the code that sets this register from the old location: lpt_pch_enable. 5 - Properly program FDI_RX_MISC pwrdn lane values on HSW 6 - Wait only 35us for the FDI link training First we wait 30us for the FDI receiver lane calibration, then we wait 5us for the FDI auto training time. 7 - Remove an useless indentation level on hsw_fdi_link_train We already "break" when the link training succeeds. 8 - Disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE When we fail the training. 9 - Change Haswell FDI link training error messages We shouldn't call DRM_ERROR when still looping through voltage levels since this is expected and not really a failure. So in this commit we adjust the error path to only DRM_ERROR when we really fail after trying everything. While at it, replace DRM_DEBUG_DRIVER with DRM_DEBUG_KMS since it's what we use everywhere. 10 - Try each voltage twice at hsw_fdi_link_train Now with Daniel Vetter's suggestion to use "/2" instead of ">>1". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Applied tiny bikesheds: - mention in comment that we test each voltage/emphasis level twice - realing arguments of the only untouched reg write, it spilled over the 80 char limit ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-02 06:00:59 +07:00
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
I915_WRITE(FDI_RX_MISC(PIPE_A), temp);
POSTING_READ(FDI_RX_MISC(PIPE_A));
}
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
}
static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(&encoder->base);
intel_dp->DP = intel_dig_port->saved_port_bits |
DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
}
static struct intel_encoder *
intel_ddi_get_crtc_encoder(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct intel_encoder *encoder, *ret = NULL;
int num_encoders = 0;
for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
ret = encoder;
num_encoders++;
}
if (num_encoders != 1)
WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders,
pipe_name(crtc->pipe));
BUG_ON(ret == NULL);
return ret;
}
#define LC_FREQ 2700
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
i915_reg_t reg)
{
int refclk = LC_FREQ;
int n, p, r;
u32 wrpll;
wrpll = I915_READ(reg);
switch (wrpll & WRPLL_PLL_REF_MASK) {
case WRPLL_PLL_SSC:
case WRPLL_PLL_NON_SSC:
/*
* We could calculate spread here, but our checking
* code only cares about 5% accuracy, and spread is a max of
* 0.5% downspread.
*/
refclk = 135;
break;
case WRPLL_PLL_LCPLL:
refclk = LC_FREQ;
break;
default:
WARN(1, "bad wrpll refclk\n");
return 0;
}
r = wrpll & WRPLL_DIVIDER_REF_MASK;
p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT;
n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT;
/* Convert to KHz, p & r have a fixed point portion */
return (refclk * n * 100) / (p * r);
}
static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
enum intel_dpll_id pll_id)
{
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t cfgcr1_reg, cfgcr2_reg;
uint32_t cfgcr1_val, cfgcr2_val;
uint32_t p0, p1, p2, dco_freq;
cfgcr1_reg = DPLL_CFGCR1(pll_id);
cfgcr2_reg = DPLL_CFGCR2(pll_id);
cfgcr1_val = I915_READ(cfgcr1_reg);
cfgcr2_val = I915_READ(cfgcr2_reg);
p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK;
p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK;
if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1))
p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
else
p1 = 1;
switch (p0) {
case DPLL_CFGCR2_PDIV_1:
p0 = 1;
break;
case DPLL_CFGCR2_PDIV_2:
p0 = 2;
break;
case DPLL_CFGCR2_PDIV_3:
p0 = 3;
break;
case DPLL_CFGCR2_PDIV_7:
p0 = 7;
break;
}
switch (p2) {
case DPLL_CFGCR2_KDIV_5:
p2 = 5;
break;
case DPLL_CFGCR2_KDIV_2:
p2 = 2;
break;
case DPLL_CFGCR2_KDIV_3:
p2 = 3;
break;
case DPLL_CFGCR2_KDIV_1:
p2 = 1;
break;
}
dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000;
dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 *
1000) / 0x8000;
return dco_freq / (p0 * p1 * p2 * 5);
}
int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv,
enum intel_dpll_id pll_id)
{
uint32_t cfgcr0, cfgcr1;
uint32_t p0, p1, p2, dco_freq, ref_clock;
if (INTEL_GEN(dev_priv) >= 11) {
cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(pll_id));
cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(pll_id));
} else {
cfgcr0 = I915_READ(CNL_DPLL_CFGCR0(pll_id));
cfgcr1 = I915_READ(CNL_DPLL_CFGCR1(pll_id));
}
p0 = cfgcr1 & DPLL_CFGCR1_PDIV_MASK;
p2 = cfgcr1 & DPLL_CFGCR1_KDIV_MASK;
if (cfgcr1 & DPLL_CFGCR1_QDIV_MODE(1))
p1 = (cfgcr1 & DPLL_CFGCR1_QDIV_RATIO_MASK) >>
DPLL_CFGCR1_QDIV_RATIO_SHIFT;
else
p1 = 1;
switch (p0) {
case DPLL_CFGCR1_PDIV_2:
p0 = 2;
break;
case DPLL_CFGCR1_PDIV_3:
p0 = 3;
break;
case DPLL_CFGCR1_PDIV_5:
p0 = 5;
break;
case DPLL_CFGCR1_PDIV_7:
p0 = 7;
break;
}
switch (p2) {
case DPLL_CFGCR1_KDIV_1:
p2 = 1;
break;
case DPLL_CFGCR1_KDIV_2:
p2 = 2;
break;
case DPLL_CFGCR1_KDIV_4:
p2 = 4;
break;
}
ref_clock = cnl_hdmi_pll_ref_clock(dev_priv);
dco_freq = (cfgcr0 & DPLL_CFGCR0_DCO_INTEGER_MASK) * ref_clock;
dco_freq += (((cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >>
DPLL_CFGCR0_DCO_FRACTION_SHIFT) * ref_clock) / 0x8000;
if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0))
return 0;
return dco_freq / (p0 * p1 * p2 * 5);
}
static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
enum port port)
{
u32 val = I915_READ(DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK;
switch (val) {
case DDI_CLK_SEL_NONE:
return 0;
case DDI_CLK_SEL_TBT_162:
return 162000;
case DDI_CLK_SEL_TBT_270:
return 270000;
case DDI_CLK_SEL_TBT_540:
return 540000;
case DDI_CLK_SEL_TBT_810:
return 810000;
default:
MISSING_CASE(val);
return 0;
}
}
static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
enum port port)
{
u32 mg_pll_div0, mg_clktop_hsclkctl;
u32 m1, m2_int, m2_frac, div1, div2, refclk;
u64 tmp;
refclk = dev_priv->cdclk.hw.ref;
mg_pll_div0 = I915_READ(MG_PLL_DIV0(port));
mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(port));
m1 = I915_READ(MG_PLL_DIV1(port)) & MG_PLL_DIV1_FBPREDIV_MASK;
m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
(mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
switch (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2:
div1 = 2;
break;
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_3:
div1 = 3;
break;
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5:
div1 = 5;
break;
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7:
div1 = 7;
break;
default:
MISSING_CASE(mg_clktop_hsclkctl);
return 0;
}
div2 = (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT;
/* div2 value of 0 is same as 1 means no div */
if (div2 == 0)
div2 = 1;
/*
* Adjust the original formula to delay the division by 2^22 in order to
* minimize possible rounding errors.
*/
tmp = (u64)m1 * m2_int * refclk +
(((u64)m1 * m2_frac * refclk) >> 22);
tmp = div_u64(tmp, 5 * div1 * div2);
return tmp;
}
static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
{
int dotclock;
if (pipe_config->has_pch_encoder)
dotclock = intel_dotclock_calculate(pipe_config->port_clock,
&pipe_config->fdi_m_n);
else if (intel_crtc_has_dp_encoder(pipe_config))
dotclock = intel_dotclock_calculate(pipe_config->port_clock,
&pipe_config->dp_m_n);
else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36)
dotclock = pipe_config->port_clock * 2 / 3;
else
dotclock = pipe_config->port_clock;
drm/i915: Add CRTC output format YCBCR 4:2:0 Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
2018-10-12 13:23:08 +07:00
if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
drm/i915: prepare pipe for YCBCR420 output To get HDMI YCBCR420 output, the PIPEMISC register should be programmed to: - Generate YCBCR output (bit 11) - In case of YCBCR420 outputs, it should be programmed in full blend mode to use the scaler in 5x3 ratio (bits 26 and 27) This patch: - Adds definition of these bits. - Programs PIPEMISC for YCBCR420 outputs. - Adds readouts to compare HW and SW states. V2: rebase V3: rebase V4: rebase V5: added r-b from Ander V6: Handle only YCBCR420 outputs (ville) V7: rebase V8: Addressed review comments from Ville - Add readouts for state->ycbcr420 and 420 pixel_clock. - Handle warning due to mismatch in clock for ycbcr420 clock. - Rename PIPEMISC macros to match the Bspec. - Add a debug print stating if YCBCR 4:2:0 output enabled. Added r-b from Ville V9: Addressed review comments from Imre: - Add 420 mode clock adjustment in intel_hdmi_mode_valid to prevent 420_only modes getting rejected for high clock. - Add port clock adjustment for ycbcr420 modes in ddi_get_clock - Rename macros as per Ville's suggestion. - Remove unnecessary wl changes. V10: Added r-b from Imre V11: Fixed faulty dotclock handling, and addressed missing comment from previous set of review comments (Imre) V12: Fixed dotclock for 12bpc too, removed 420 check for GEN < 10 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500904172-31717-1-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-24 20:49:32 +07:00
dotclock *= 2;
if (pipe_config->pixel_multiplier)
dotclock /= pipe_config->pixel_multiplier;
pipe_config->base.adjusted_mode.crtc_clock = dotclock;
}
static void icl_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int link_clock = 0;
uint32_t pll_id;
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
if (intel_port_is_combophy(dev_priv, port)) {
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
link_clock = cnl_calc_wrpll_link(dev_priv, pll_id);
else
link_clock = icl_calc_dp_combo_pll_link(dev_priv,
pll_id);
} else {
if (pll_id == DPLL_ID_ICL_TBTPLL)
link_clock = icl_calc_tbt_pll_link(dev_priv, port);
else
link_clock = icl_calc_mg_pll_link(dev_priv, port);
}
pipe_config->port_clock = link_clock;
ddi_dotclock_get(pipe_config);
}
static void cnl_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
int link_clock = 0;
uint32_t cfgcr0;
enum intel_dpll_id pll_id;
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
cfgcr0 = I915_READ(CNL_DPLL_CFGCR0(pll_id));
if (cfgcr0 & DPLL_CFGCR0_HDMI_MODE) {
link_clock = cnl_calc_wrpll_link(dev_priv, pll_id);
} else {
link_clock = cfgcr0 & DPLL_CFGCR0_LINK_RATE_MASK;
switch (link_clock) {
case DPLL_CFGCR0_LINK_RATE_810:
link_clock = 81000;
break;
case DPLL_CFGCR0_LINK_RATE_1080:
link_clock = 108000;
break;
case DPLL_CFGCR0_LINK_RATE_1350:
link_clock = 135000;
break;
case DPLL_CFGCR0_LINK_RATE_1620:
link_clock = 162000;
break;
case DPLL_CFGCR0_LINK_RATE_2160:
link_clock = 216000;
break;
case DPLL_CFGCR0_LINK_RATE_2700:
link_clock = 270000;
break;
case DPLL_CFGCR0_LINK_RATE_3240:
link_clock = 324000;
break;
case DPLL_CFGCR0_LINK_RATE_4050:
link_clock = 405000;
break;
default:
WARN(1, "Unsupported link rate\n");
break;
}
link_clock *= 2;
}
pipe_config->port_clock = link_clock;
ddi_dotclock_get(pipe_config);
}
static void skl_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
int link_clock = 0;
uint32_t dpll_ctl1;
enum intel_dpll_id pll_id;
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
dpll_ctl1 = I915_READ(DPLL_CTRL1);
if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
} else {
link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
switch (link_clock) {
case DPLL_CTRL1_LINK_RATE_810:
link_clock = 81000;
break;
case DPLL_CTRL1_LINK_RATE_1080:
link_clock = 108000;
break;
case DPLL_CTRL1_LINK_RATE_1350:
link_clock = 135000;
break;
case DPLL_CTRL1_LINK_RATE_1620:
link_clock = 162000;
break;
case DPLL_CTRL1_LINK_RATE_2160:
link_clock = 216000;
break;
case DPLL_CTRL1_LINK_RATE_2700:
link_clock = 270000;
break;
default:
WARN(1, "Unsupported link rate\n");
break;
}
link_clock *= 2;
}
pipe_config->port_clock = link_clock;
ddi_dotclock_get(pipe_config);
}
static void hsw_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
int link_clock = 0;
u32 val, pll;
val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll);
switch (val & PORT_CLK_SEL_MASK) {
case PORT_CLK_SEL_LCPLL_810:
link_clock = 81000;
break;
case PORT_CLK_SEL_LCPLL_1350:
link_clock = 135000;
break;
case PORT_CLK_SEL_LCPLL_2700:
link_clock = 270000;
break;
case PORT_CLK_SEL_WRPLL1:
link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0));
break;
case PORT_CLK_SEL_WRPLL2:
link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1));
break;
case PORT_CLK_SEL_SPLL:
pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK;
if (pll == SPLL_PLL_FREQ_810MHz)
link_clock = 81000;
else if (pll == SPLL_PLL_FREQ_1350MHz)
link_clock = 135000;
else if (pll == SPLL_PLL_FREQ_2700MHz)
link_clock = 270000;
else {
WARN(1, "bad spll freq\n");
return;
}
break;
default:
WARN(1, "bad port clock sel\n");
return;
}
pipe_config->port_clock = link_clock * 2;
ddi_dotclock_get(pipe_config);
}
static int bxt_calc_pll_link(struct intel_crtc_state *crtc_state)
{
struct intel_dpll_hw_state *state;
struct dpll clock;
/* For DDI ports we always use a shared PLL. */
if (WARN_ON(!crtc_state->shared_dpll))
return 0;
state = &crtc_state->dpll_hw_state;
clock.m1 = 2;
clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22;
if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE)
clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK;
clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT;
clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT;
clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT;
return chv_calc_dpll_params(100000, &clock);
}
static void bxt_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
pipe_config->port_clock = bxt_calc_pll_link(pipe_config);
ddi_dotclock_get(pipe_config);
}
static void intel_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (IS_ICELAKE(dev_priv))
icl_ddi_clock_get(encoder, pipe_config);
else if (IS_CANNONLAKE(dev_priv))
cnl_ddi_clock_get(encoder, pipe_config);
else if (IS_GEN9_LP(dev_priv))
bxt_ddi_clock_get(encoder, pipe_config);
else if (IS_GEN9_BC(dev_priv))
skl_ddi_clock_get(encoder, pipe_config);
else if (INTEL_GEN(dev_priv) <= 8)
hsw_ddi_clock_get(encoder, pipe_config);
}
void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 temp;
if (!intel_crtc_has_dp_encoder(crtc_state))
return;
WARN_ON(transcoder_is_dsi(cpu_transcoder));
temp = TRANS_MSA_SYNC_CLK;
drm/i915: set DP Main Stream Attribute for color range on DDI platforms Since Haswell we have no color range indication either in the pipe or port registers for DP. Instead, there's a separate register for setting the DP Main Stream Attributes (MSA) directly. The MSA register definition makes no references to colorimetry, just a vague reference to the DP spec. The connection to the color range was lost. Apparently we've failed to set the proper MSA bit for limited, or CEA, range ever since the first DDI platforms. We've started setting other MSA parameters since commit dae847991a43 ("drm/i915: add intel_ddi_set_pipe_settings"). Without the crucial bit of information, the DP sink has no way of knowing the source is actually transmitting limited range RGB, leading to "washed out" colors. With the colorimetry information, compliant sinks should be able to handle the limited range properly. Native (i.e. non-LSPCON) HDMI was not affected because we do pass the color range via AVI infoframes. Though not the root cause, the problem was made worse for DDI platforms with commit 55bc60db5988 ("drm/i915: Add "Automatic" mode for the "Broadcast RGB" property"), which selects limited range RGB automatically based on the mode, as per the DP, HDMI and CEA specs. After all these years, the fix boils down to flipping one bit. [Per testing reports, this fixes DP sinks, but not the LSPCON. My educated guess is that the LSPCON fails to turn the CEA range MSA into AVI infoframes for HDMI.] Reported-by: Michał Kopeć <mkopec12@gmail.com> Reported-by: N. W. <nw9165-3201@yahoo.com> Reported-by: Nicholas Stommel <nicholas.stommel@gmail.com> Reported-by: Tom Yan <tom.ty89@gmail.com> Tested-by: Nicholas Stommel <nicholas.stommel@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=100023 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.9+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.nikula@intel.com
2018-08-14 13:00:01 +07:00
if (crtc_state->limited_color_range)
temp |= TRANS_MSA_CEA_RANGE;
switch (crtc_state->pipe_bpp) {
case 18:
temp |= TRANS_MSA_6_BPC;
break;
case 24:
temp |= TRANS_MSA_8_BPC;
break;
case 30:
temp |= TRANS_MSA_10_BPC;
break;
case 36:
temp |= TRANS_MSA_12_BPC;
break;
default:
MISSING_CASE(crtc_state->pipe_bpp);
break;
}
drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON LSPCON chips can generate YCBCR outputs, if asked nicely :). In order to generate YCBCR 4:2:0 outputs, a source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:2:0 in AVI infoframes Whereas for YCBCR 4:4:4 outputs, the source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:4:4 in AVI infoframes So for both 4:2:0 as well as 4:4:4 outputs, we are driving the pipe for YCBCR 4:4:4 output, but AVI infoframe's color space information indicates LSPCON FW to start scaling down from YCBCR 4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by LSPCON device, we need not to reserve a scaler for 4:2:0 outputs. V2: rebase V3: Addressed review comments from Ville - add enum crtc_output_format instead of bool ycbcr420 - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output cases in this way we will have YCBCR 4:4:4 framework ready (except the ABI part) V4: Added r-b from Maarten (for v3) Addressed review comments from Ville: - Do not add a non-atomic state variable to determine lspcon output. Instead add bool in CRTC state to indicate lspcon based scaling. V5: Addressed review comments from Ville: - Change the state bool name from external scaling to something more relavent. - Keep the info and adjusted_mode structures const. - use crtc_state instead of pipe_config. - Push all the config change into lspcon_ycbcr420_config function. V6: Rebase, small changes to accommodate changes in patch 2. V7: Fixed checkpatch warnings for alignment V8: Rebase PS: Ignored following warnings to match the current formatting: drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721: +#define TRANS_MSA_SAMPLING_444 (2<<1) ^ -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722: +#define TRANS_MSA_CLRSP_YCBCR (2<<3) V9: Rebase V10: Rebase V11: Rebase Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-8-git-send-email-shashank.sharma@intel.com
2018-10-12 13:23:14 +07:00
/*
* As per DP 1.2 spec section 2.3.4.3 while sending
* YCBCR 444 signals we should program MSA MISC1/0 fields with
* colorspace information. The output colorspace encoding is BT601.
*/
if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
temp |= TRANS_MSA_SAMPLING_444 | TRANS_MSA_CLRSP_YCBCR;
I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
}
void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
bool state)
2014-05-02 11:02:48 +07:00
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
2014-05-02 11:02:48 +07:00
uint32_t temp;
drm/i915: Stop frobbing with DDI encoder->type Currently the DDI encoder->type will change at runtime depending on what kind of hotplugs we've processed. That's quite bad since we can't really trust that that current value of encoder->type actually matches the type of signal we're trying to drive through it. Let's eliminate that problem by declaring that non-eDP DDI port will always have the encoder type as INTEL_OUTPUT_DDI. This means the code can no longer try to distinguish DP vs. HDMI based on encoder->type. We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and there's a bunch of code that relies on that value to identify eDP encoders. We'll introduce a new encoder .compute_output_type() hook. This allows us to compute the full output_types before any encoder .compute_config() hooks get called, thus those hooks can rely on output_types being correct, which is useful for cloning on oldr platforms. For now we'll just look at the connector type and pick the correct mode based on that. In the future the new hook could be used to implement dynamic switching between LS and PCON modes for LSPCON. v2: Fix BXT/GLK PPS explosion with DSI/MST encoders v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg v4: Rebase v5: Populate output_types in .get_config() rather than in the caller v5: Split out populating output_types in .get_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-28 02:31:24 +07:00
2014-05-02 11:02:48 +07:00
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (state == true)
temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
else
temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
}
void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
enum port port = encoder->port;
uint32_t temp;
/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
temp = TRANS_DDI_FUNC_ENABLE;
temp |= TRANS_DDI_SELECT_PORT(port);
switch (crtc_state->pipe_bpp) {
case 18:
temp |= TRANS_DDI_BPC_6;
break;
case 24:
temp |= TRANS_DDI_BPC_8;
break;
case 30:
temp |= TRANS_DDI_BPC_10;
break;
case 36:
temp |= TRANS_DDI_BPC_12;
break;
default:
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
BUG();
}
if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC)
temp |= TRANS_DDI_PVSYNC;
if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DDI_PHSYNC;
if (cpu_transcoder == TRANSCODER_EDP) {
switch (pipe) {
case PIPE_A:
/* On Haswell, can only use the always-on power well for
* eDP when not using the panel fitter, and when not
* using motion blur mitigation (which we don't
* support). */
if (IS_HASWELL(dev_priv) &&
(crtc_state->pch_pfit.enabled ||
crtc_state->pch_pfit.force_thru))
temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
else
temp |= TRANS_DDI_EDP_INPUT_A_ON;
break;
case PIPE_B:
temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
break;
case PIPE_C:
temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
break;
default:
BUG();
break;
}
}
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
if (crtc_state->has_hdmi_sink)
temp |= TRANS_DDI_MODE_SELECT_HDMI;
else
temp |= TRANS_DDI_MODE_SELECT_DVI;
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
if (crtc_state->hdmi_scrambling)
temp |= TRANS_DDI_HDMI_SCRAMBLING_MASK;
if (crtc_state->hdmi_high_tmds_clock_ratio)
temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
temp |= TRANS_DDI_MODE_SELECT_FDI;
temp |= (crtc_state->fdi_lanes - 1) << 1;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) {
temp |= TRANS_DDI_MODE_SELECT_DP_MST;
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
} else {
temp |= TRANS_DDI_MODE_SELECT_DP_SST;
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
}
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
}
void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
uint32_t val = I915_READ(reg);
2014-05-02 11:02:48 +07:00
val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
val |= TRANS_DDI_PORT_NONE;
I915_WRITE(reg, val);
if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
/* Quirk time at 100ms for reliable operation */
msleep(100);
}
}
int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder,
bool enable)
{
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum pipe pipe = 0;
int ret = 0;
uint32_t tmp;
if (WARN_ON(!intel_display_power_get_if_enabled(dev_priv,
intel_encoder->power_domain)))
return -ENXIO;
if (WARN_ON(!intel_encoder->get_hw_state(intel_encoder, &pipe))) {
ret = -EIO;
goto out;
}
tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe));
if (enable)
tmp |= TRANS_DDI_HDCP_SIGNALLING;
else
tmp &= ~TRANS_DDI_HDCP_SIGNALLING;
I915_WRITE(TRANS_DDI_FUNC_CTL(pipe), tmp);
out:
intel_display_power_put(dev_priv, intel_encoder->power_domain);
return ret;
}
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
{
struct drm_device *dev = intel_connector->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_encoder *encoder = intel_connector->encoder;
int type = intel_connector->base.connector_type;
enum port port = encoder->port;
enum pipe pipe = 0;
enum transcoder cpu_transcoder;
uint32_t tmp;
bool ret;
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
return false;
if (!encoder->get_hw_state(encoder, &pipe)) {
ret = false;
goto out;
}
if (port == PORT_A)
cpu_transcoder = TRANSCODER_EDP;
else
cpu_transcoder = (enum transcoder) pipe;
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
switch (tmp & TRANS_DDI_MODE_SELECT_MASK) {
case TRANS_DDI_MODE_SELECT_HDMI:
case TRANS_DDI_MODE_SELECT_DVI:
ret = type == DRM_MODE_CONNECTOR_HDMIA;
break;
case TRANS_DDI_MODE_SELECT_DP_SST:
ret = type == DRM_MODE_CONNECTOR_eDP ||
type == DRM_MODE_CONNECTOR_DisplayPort;
break;
2014-05-02 11:02:48 +07:00
case TRANS_DDI_MODE_SELECT_DP_MST:
/* if the transcoder is in MST state then
* connector isn't connected */
ret = false;
break;
case TRANS_DDI_MODE_SELECT_FDI:
ret = type == DRM_MODE_CONNECTOR_VGA;
break;
default:
ret = false;
break;
}
out:
intel_display_power_put(dev_priv, encoder->power_domain);
return ret;
}
static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
u8 *pipe_mask, bool *is_dp_mst)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum port port = encoder->port;
enum pipe p;
u32 tmp;
u8 mst_pipe_mask;
*pipe_mask = 0;
*is_dp_mst = false;
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
return;
tmp = I915_READ(DDI_BUF_CTL(port));
if (!(tmp & DDI_BUF_CTL_ENABLE))
goto out;
if (port == PORT_A) {
tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
default:
MISSING_CASE(tmp & TRANS_DDI_EDP_INPUT_MASK);
/* fallthrough */
case TRANS_DDI_EDP_INPUT_A_ON:
case TRANS_DDI_EDP_INPUT_A_ONOFF:
*pipe_mask = BIT(PIPE_A);
break;
case TRANS_DDI_EDP_INPUT_B_ONOFF:
*pipe_mask = BIT(PIPE_B);
break;
case TRANS_DDI_EDP_INPUT_C_ONOFF:
*pipe_mask = BIT(PIPE_C);
break;
}
goto out;
}
2014-05-02 11:02:48 +07:00
mst_pipe_mask = 0;
for_each_pipe(dev_priv, p) {
enum transcoder cpu_transcoder = (enum transcoder)p;
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if ((tmp & TRANS_DDI_PORT_MASK) != TRANS_DDI_SELECT_PORT(port))
continue;
if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
TRANS_DDI_MODE_SELECT_DP_MST)
mst_pipe_mask |= BIT(p);
*pipe_mask |= BIT(p);
}
if (!*pipe_mask)
DRM_DEBUG_KMS("No pipe for ddi port %c found\n",
port_name(port));
if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) {
DRM_DEBUG_KMS("Multiple pipes for non DP-MST port %c (pipe_mask %02x)\n",
port_name(port), *pipe_mask);
*pipe_mask = BIT(ffs(*pipe_mask) - 1);
}
if (mst_pipe_mask && mst_pipe_mask != *pipe_mask)
DRM_DEBUG_KMS("Conflicting MST and non-MST encoders for port %c (pipe_mask %02x mst_pipe_mask %02x)\n",
port_name(port), *pipe_mask, mst_pipe_mask);
else
*is_dp_mst = mst_pipe_mask;
out:
if (*pipe_mask && IS_GEN9_LP(dev_priv)) {
tmp = I915_READ(BXT_PHY_CTL(port));
if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
BXT_PHY_LANE_POWERDOWN_ACK |
BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
DRM_ERROR("Port %c enabled but PHY powered down? "
"(PHY_CTL %08x)\n", port_name(port), tmp);
}
intel_display_power_put(dev_priv, encoder->power_domain);
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
u8 pipe_mask;
bool is_mst;
intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst);
if (is_mst || !pipe_mask)
return false;
*pipe = ffs(pipe_mask) - 1;
return true;
}
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
static inline enum intel_display_power_domain
intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port)
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
{
/* CNL+ HW requires corresponding AUX IOs to be powered up for PSR with
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
* DC states enabled at the same time, while for driver initiated AUX
* transfers we need the same AUX IOs to be powered but with DC states
* disabled. Accordingly use the AUX power domain here which leaves DC
* states enabled.
* However, for non-A AUX ports the corresponding non-EDP transcoders
* would have already enabled power well 2 and DC_OFF. This means we can
* acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a
* specific AUX_IO reference without powering up any extra wells.
* Note that PSR is enabled only on Port A even though this function
* returns the correct domain for other ports too.
*/
return dig_port->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A :
intel_aux_power_domain(dig_port);
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
}
static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port;
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
u64 domains;
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
/*
* TODO: Add support for MST encoders. Atm, the following should never
* happen since fake-MST encoders don't set their get_power_domains()
* hook.
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
*/
if (WARN_ON(intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)))
return 0;
dig_port = enc_to_dig_port(&encoder->base);
domains = BIT_ULL(dig_port->ddi_io_power_domain);
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
/*
* AUX power is only needed for (e)DP mode, and for HDMI mode on TC
* ports.
*/
if (intel_crtc_has_dp_encoder(crtc_state) ||
intel_port_is_tc(dev_priv, encoder->port))
domains |= BIT_ULL(intel_ddi_main_link_aux_domain(dig_port));
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
/*
* VDSC power is needed when DSC is enabled
*/
if (crtc_state->dsc_params.compression_enable)
domains |= BIT_ULL(intel_dsc_power_domain(crtc_state));
drm/i915/ddi: Get AUX power domain for DP main link too So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> [Clarified code comments in intel_ddi_main_link_aux_domain() and intel_ddi_get_power_domains() (Imre)] Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
2018-06-22 01:44:49 +07:00
return domains;
}
void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
enum port port = encoder->port;
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
if (cpu_transcoder != TRANSCODER_EDP)
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
TRANS_CLK_SEL_PORT(port));
}
void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
if (cpu_transcoder != TRANSCODER_EDP)
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
TRANS_CLK_SEL_DISABLED);
}
static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
enum port port, uint8_t iboost)
{
u32 tmp;
tmp = I915_READ(DISPIO_CR_TX_BMU_CR0);
tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port));
if (iboost)
tmp |= iboost << BALANCE_LEG_SHIFT(port);
else
tmp |= BALANCE_LEG_DISABLE(port);
I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp);
}
static void skl_ddi_set_iboost(struct intel_encoder *encoder,
int level, enum intel_output_type type)
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
uint8_t iboost;
if (type == INTEL_OUTPUT_HDMI)
iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level;
else
iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level;
if (iboost == 0) {
const struct ddi_buf_trans *ddi_translations;
int n_entries;
if (type == INTEL_OUTPUT_HDMI)
ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
else if (type == INTEL_OUTPUT_EDP)
ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries);
else
ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries);
if (WARN_ON_ONCE(!ddi_translations))
return;
if (WARN_ON_ONCE(level >= n_entries))
level = n_entries - 1;
iboost = ddi_translations[level].i_boost;
}
/* Make sure that the requested I_boost is valid */
if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) {
DRM_ERROR("Invalid I_boost value %u\n", iboost);
return;
}
_skl_ddi_set_iboost(dev_priv, port, iboost);
if (port == PORT_A && intel_dig_port->max_lanes == 4)
_skl_ddi_set_iboost(dev_priv, PORT_E, iboost);
}
static void bxt_ddi_vswing_sequence(struct intel_encoder *encoder,
int level, enum intel_output_type type)
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
const struct bxt_ddi_buf_trans *ddi_translations;
enum port port = encoder->port;
int n_entries;
if (type == INTEL_OUTPUT_HDMI)
ddi_translations = bxt_get_buf_trans_hdmi(dev_priv, &n_entries);
else if (type == INTEL_OUTPUT_EDP)
ddi_translations = bxt_get_buf_trans_edp(dev_priv, &n_entries);
else
ddi_translations = bxt_get_buf_trans_dp(dev_priv, &n_entries);
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
if (WARN_ON_ONCE(!ddi_translations))
return;
if (WARN_ON_ONCE(level >= n_entries))
level = n_entries - 1;
bxt_ddi_phy_set_signal_level(dev_priv, port,
ddi_translations[level].margin,
ddi_translations[level].scale,
ddi_translations[level].enable,
ddi_translations[level].deemphasis);
drm/i915/bxt: VSwing programming sequence VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 17:15:27 +07:00
}
u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int n_entries;
if (IS_ICELAKE(dev_priv)) {
if (intel_port_is_combophy(dev_priv, port))
icl_get_combo_buf_trans(dev_priv, port, encoder->type,
&n_entries);
else
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
} else if (IS_CANNONLAKE(dev_priv)) {
if (encoder->type == INTEL_OUTPUT_EDP)
cnl_get_buf_trans_edp(dev_priv, &n_entries);
else
cnl_get_buf_trans_dp(dev_priv, &n_entries);
} else if (IS_GEN9_LP(dev_priv)) {
if (encoder->type == INTEL_OUTPUT_EDP)
bxt_get_buf_trans_edp(dev_priv, &n_entries);
else
bxt_get_buf_trans_dp(dev_priv, &n_entries);
} else {
if (encoder->type == INTEL_OUTPUT_EDP)
intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries);
else
intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries);
}
if (WARN_ON(n_entries < 1))
n_entries = 1;
if (WARN_ON(n_entries > ARRAY_SIZE(index_to_dp_signal_levels)))
n_entries = ARRAY_SIZE(index_to_dp_signal_levels);
return index_to_dp_signal_levels[n_entries - 1] &
DP_TRAIN_VOLTAGE_SWING_MASK;
}
/*
* We assume that the full set of pre-emphasis values can be
* used on all DDI platforms. Should that change we need to
* rethink this code.
*/
u8 intel_ddi_dp_pre_emphasis_max(struct intel_encoder *encoder, u8 voltage_swing)
{
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_3;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
}
static void cnl_ddi_vswing_program(struct intel_encoder *encoder,
int level, enum intel_output_type type)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
const struct cnl_ddi_buf_trans *ddi_translations;
enum port port = encoder->port;
int n_entries, ln;
u32 val;
if (type == INTEL_OUTPUT_HDMI)
ddi_translations = cnl_get_buf_trans_hdmi(dev_priv, &n_entries);
else if (type == INTEL_OUTPUT_EDP)
ddi_translations = cnl_get_buf_trans_edp(dev_priv, &n_entries);
else
ddi_translations = cnl_get_buf_trans_dp(dev_priv, &n_entries);
if (WARN_ON_ONCE(!ddi_translations))
return;
if (WARN_ON_ONCE(level >= n_entries))
level = n_entries - 1;
/* Set PORT_TX_DW5 Scaling Mode Sel to 010b. */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
val &= ~SCALING_MODE_SEL_MASK;
val |= SCALING_MODE_SEL(2);
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW2 */
val = I915_READ(CNL_PORT_TX_DW2_LN0(port));
val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
RCOMP_SCALAR_MASK);
val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
/* Rcomp scalar is fixed as 0x98 for every table entry */
val |= RCOMP_SCALAR(0x98);
I915_WRITE(CNL_PORT_TX_DW2_GRP(port), val);
/* Program PORT_TX_DW4 */
/* We cannot write to GRP. It would overrite individual loadgen */
for (ln = 0; ln < 4; ln++) {
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
CURSOR_COEFF_MASK);
val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
}
/* Program PORT_TX_DW5 */
/* All DW5 values are fixed for every table entry */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
val &= ~RTERM_SELECT_MASK;
val |= RTERM_SELECT(6);
val |= TAP3_DISABLE;
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW7 */
val = I915_READ(CNL_PORT_TX_DW7_LN0(port));
val &= ~N_SCALAR_MASK;
val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val);
}
static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
int level, enum intel_output_type type)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int width, rate, ln;
u32 val;
if (type == INTEL_OUTPUT_HDMI) {
width = 4;
rate = 0; /* Rate is always < than 6GHz for HDMI */
} else {
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
width = intel_dp->lane_count;
rate = intel_dp->link_rate;
}
/*
* 1. If port type is eDP or DP,
* set PORT_PCS_DW1 cmnkeeper_enable to 1b,
* else clear to 0b.
*/
val = I915_READ(CNL_PORT_PCS_DW1_LN0(port));
if (type != INTEL_OUTPUT_HDMI)
val |= COMMON_KEEPER_EN;
else
val &= ~COMMON_KEEPER_EN;
I915_WRITE(CNL_PORT_PCS_DW1_GRP(port), val);
/* 2. Program loadgen select */
/*
* Program PORT_TX_DW4_LN depending on Bit rate and used lanes
* <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1)
* <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0)
* > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
*/
for (ln = 0; ln <= 3; ln++) {
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
val &= ~LOADGEN_SELECT;
if ((rate <= 600000 && width == 4 && ln >= 1) ||
(rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
val |= LOADGEN_SELECT;
}
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
}
/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
val = I915_READ(CNL_PORT_CL1CM_DW5);
val |= SUS_CLOCK_CONFIG;
I915_WRITE(CNL_PORT_CL1CM_DW5, val);
/* 4. Clear training enable to change swing values */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
val &= ~TX_TRAINING_EN;
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
/* 5. Program swing and de-emphasis */
cnl_ddi_vswing_program(encoder, level, type);
/* 6. Set training enable to trigger update */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
val |= TX_TRAINING_EN;
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
}
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
u32 level, enum port port, int type)
{
const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
u32 n_entries, val;
int ln;
ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type,
&n_entries);
if (!ddi_translations)
return;
if (level >= n_entries) {
DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1);
level = n_entries - 1;
}
/* Set PORT_TX_DW5 Rterm Sel to 110b. */
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
val &= ~RTERM_SELECT_MASK;
val |= RTERM_SELECT(0x6);
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW5 */
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
/* Set DisableTap2 and DisableTap3 if MIPI DSI
* Clear DisableTap2 and DisableTap3 for all other Ports
*/
if (type == INTEL_OUTPUT_DSI) {
val |= TAP2_DISABLE;
val |= TAP3_DISABLE;
} else {
val &= ~TAP2_DISABLE;
val &= ~TAP3_DISABLE;
}
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW2 */
val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
RCOMP_SCALAR_MASK);
val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
/* Program Rcomp scalar for every table entry */
val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
/* Program PORT_TX_DW4 */
/* We cannot write to GRP. It would overwrite individual loadgen. */
for (ln = 0; ln <= 3; ln++) {
val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
CURSOR_COEFF_MASK);
val |= ddi_translations[level].dw4_scaling;
I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
}
}
static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
u32 level,
enum intel_output_type type)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int width = 0;
int rate = 0;
u32 val;
int ln = 0;
if (type == INTEL_OUTPUT_HDMI) {
width = 4;
/* Rate is always < than 6GHz for HDMI */
} else {
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
width = intel_dp->lane_count;
rate = intel_dp->link_rate;
}
/*
* 1. If port type is eDP or DP,
* set PORT_PCS_DW1 cmnkeeper_enable to 1b,
* else clear to 0b.
*/
val = I915_READ(ICL_PORT_PCS_DW1_LN0(port));
if (type == INTEL_OUTPUT_HDMI)
val &= ~COMMON_KEEPER_EN;
else
val |= COMMON_KEEPER_EN;
I915_WRITE(ICL_PORT_PCS_DW1_GRP(port), val);
/* 2. Program loadgen select */
/*
* Program PORT_TX_DW4_LN depending on Bit rate and used lanes
* <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1)
* <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0)
* > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
*/
for (ln = 0; ln <= 3; ln++) {
val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
val &= ~LOADGEN_SELECT;
if ((rate <= 600000 && width == 4 && ln >= 1) ||
(rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
val |= LOADGEN_SELECT;
}
I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
}
/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
val = I915_READ(ICL_PORT_CL_DW5(port));
val |= SUS_CLOCK_CONFIG;
I915_WRITE(ICL_PORT_CL_DW5(port), val);
/* 4. Clear training enable to change swing values */
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
val &= ~TX_TRAINING_EN;
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
/* 5. Program swing and de-emphasis */
icl_ddi_combo_vswing_program(dev_priv, level, port, type);
/* 6. Set training enable to trigger update */
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
val |= TX_TRAINING_EN;
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
}
static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
int link_clock,
u32 level)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
const struct icl_mg_phy_ddi_buf_trans *ddi_translations;
u32 n_entries, val;
int ln;
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
ddi_translations = icl_mg_phy_ddi_translations;
/* The table does not have values for level 3 and level 9. */
if (level >= n_entries || level == 3 || level == 9) {
DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.",
level, n_entries - 2);
level = n_entries - 2;
}
/* Set MG_TX_LINK_PARAMS cri_use_fs32 to 0. */
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_TX1_LINK_PARAMS(port, ln));
val &= ~CRI_USE_FS32;
I915_WRITE(MG_TX1_LINK_PARAMS(port, ln), val);
val = I915_READ(MG_TX2_LINK_PARAMS(port, ln));
val &= ~CRI_USE_FS32;
I915_WRITE(MG_TX2_LINK_PARAMS(port, ln), val);
}
/* Program MG_TX_SWINGCTRL with values from vswing table */
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_TX1_SWINGCTRL(port, ln));
val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK;
val |= CRI_TXDEEMPH_OVERRIDE_17_12(
ddi_translations[level].cri_txdeemph_override_17_12);
I915_WRITE(MG_TX1_SWINGCTRL(port, ln), val);
val = I915_READ(MG_TX2_SWINGCTRL(port, ln));
val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK;
val |= CRI_TXDEEMPH_OVERRIDE_17_12(
ddi_translations[level].cri_txdeemph_override_17_12);
I915_WRITE(MG_TX2_SWINGCTRL(port, ln), val);
}
/* Program MG_TX_DRVCTRL with values from vswing table */
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_TX1_DRVCTRL(port, ln));
val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK |
CRI_TXDEEMPH_OVERRIDE_5_0_MASK);
val |= CRI_TXDEEMPH_OVERRIDE_5_0(
ddi_translations[level].cri_txdeemph_override_5_0) |
CRI_TXDEEMPH_OVERRIDE_11_6(
ddi_translations[level].cri_txdeemph_override_11_6) |
CRI_TXDEEMPH_OVERRIDE_EN;
I915_WRITE(MG_TX1_DRVCTRL(port, ln), val);
val = I915_READ(MG_TX2_DRVCTRL(port, ln));
val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK |
CRI_TXDEEMPH_OVERRIDE_5_0_MASK);
val |= CRI_TXDEEMPH_OVERRIDE_5_0(
ddi_translations[level].cri_txdeemph_override_5_0) |
CRI_TXDEEMPH_OVERRIDE_11_6(
ddi_translations[level].cri_txdeemph_override_11_6) |
CRI_TXDEEMPH_OVERRIDE_EN;
I915_WRITE(MG_TX2_DRVCTRL(port, ln), val);
/* FIXME: Program CRI_LOADGEN_SEL after the spec is updated */
}
/*
* Program MG_CLKHUB<LN, port being used> with value from frequency table
* In case of Legacy mode on MG PHY, both TX1 and TX2 enabled so use the
* values from table for which TX1 and TX2 enabled.
*/
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_CLKHUB(port, ln));
if (link_clock < 300000)
val |= CFG_LOW_RATE_LKREN_EN;
else
val &= ~CFG_LOW_RATE_LKREN_EN;
I915_WRITE(MG_CLKHUB(port, ln), val);
}
/* Program the MG_TX_DCC<LN, port being used> based on the link frequency */
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_TX1_DCC(port, ln));
val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK;
if (link_clock <= 500000) {
val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN;
} else {
val |= CFG_AMI_CK_DIV_OVERRIDE_EN |
CFG_AMI_CK_DIV_OVERRIDE_VAL(1);
}
I915_WRITE(MG_TX1_DCC(port, ln), val);
val = I915_READ(MG_TX2_DCC(port, ln));
val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK;
if (link_clock <= 500000) {
val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN;
} else {
val |= CFG_AMI_CK_DIV_OVERRIDE_EN |
CFG_AMI_CK_DIV_OVERRIDE_VAL(1);
}
I915_WRITE(MG_TX2_DCC(port, ln), val);
}
/* Program MG_TX_PISO_READLOAD with values from vswing table */
for (ln = 0; ln < 2; ln++) {
val = I915_READ(MG_TX1_PISO_READLOAD(port, ln));
val |= CRI_CALCINIT;
I915_WRITE(MG_TX1_PISO_READLOAD(port, ln), val);
val = I915_READ(MG_TX2_PISO_READLOAD(port, ln));
val |= CRI_CALCINIT;
I915_WRITE(MG_TX2_PISO_READLOAD(port, ln), val);
}
}
static void icl_ddi_vswing_sequence(struct intel_encoder *encoder,
int link_clock,
u32 level,
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
enum intel_output_type type)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
enum port port = encoder->port;
if (intel_port_is_combophy(dev_priv, port))
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
icl_combo_phy_ddi_vswing_sequence(encoder, level, type);
else
icl_mg_phy_ddi_vswing_sequence(encoder, link_clock, level);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
}
static uint32_t translate_signal_level(int signal_levels)
{
int i;
for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) {
if (index_to_dp_signal_levels[i] == signal_levels)
return i;
}
WARN(1, "Unsupported voltage swing/pre-emphasis level: 0x%x\n",
signal_levels);
return 0;
}
static uint32_t intel_ddi_dp_level(struct intel_dp *intel_dp)
{
uint8_t train_set = intel_dp->train_set[0];
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
return translate_signal_level(signal_levels);
}
u32 bxt_signal_levels(struct intel_dp *intel_dp)
{
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
struct intel_encoder *encoder = &dport->base;
int level = intel_ddi_dp_level(intel_dp);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
if (IS_ICELAKE(dev_priv))
icl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
level, encoder->type);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
else if (IS_CANNONLAKE(dev_priv))
cnl_ddi_vswing_sequence(encoder, level, encoder->type);
else
bxt_ddi_vswing_sequence(encoder, level, encoder->type);
return 0;
}
uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
{
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
struct intel_encoder *encoder = &dport->base;
int level = intel_ddi_dp_level(intel_dp);
if (IS_GEN9_BC(dev_priv))
skl_ddi_set_iboost(encoder, level, encoder->type);
return DDI_BUF_TRANS_SELECT(level);
}
static inline
uint32_t icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
enum port port)
{
if (intel_port_is_combophy(dev_priv, port)) {
return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(port);
} else if (intel_port_is_tc(dev_priv, port)) {
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
return ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port);
}
return 0;
}
static void icl_map_plls_to_ports(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_shared_dpll *pll = crtc_state->shared_dpll;
enum port port = encoder->port;
u32 val;
mutex_lock(&dev_priv->dpll_lock);
val = I915_READ(DPCLKA_CFGCR0_ICL);
WARN_ON((val & icl_dpclka_cfgcr0_clk_off(dev_priv, port)) == 0);
if (intel_port_is_combophy(dev_priv, port)) {
val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port);
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
POSTING_READ(DPCLKA_CFGCR0_ICL);
}
val &= ~icl_dpclka_cfgcr0_clk_off(dev_priv, port);
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
mutex_unlock(&dev_priv->dpll_lock);
}
static void icl_unmap_plls_to_ports(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
u32 val;
mutex_lock(&dev_priv->dpll_lock);
val = I915_READ(DPCLKA_CFGCR0_ICL);
val |= icl_dpclka_cfgcr0_clk_off(dev_priv, port);
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
mutex_unlock(&dev_priv->dpll_lock);
}
void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 val;
enum port port;
u32 port_mask;
bool ddi_clk_needed;
/*
* In case of DP MST, we sanitize the primary encoder only, not the
* virtual ones.
*/
if (encoder->type == INTEL_OUTPUT_DP_MST)
return;
if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) {
u8 pipe_mask;
bool is_mst;
intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst);
/*
* In the unlikely case that BIOS enables DP in MST mode, just
* warn since our MST HW readout is incomplete.
*/
if (WARN_ON(is_mst))
return;
}
port_mask = BIT(encoder->port);
ddi_clk_needed = encoder->base.crtc;
if (encoder->type == INTEL_OUTPUT_DSI) {
struct intel_encoder *other_encoder;
port_mask = intel_dsi_encoder_ports(encoder);
/*
* Sanity check that we haven't incorrectly registered another
* encoder using any of the ports of this DSI encoder.
*/
for_each_intel_encoder(&dev_priv->drm, other_encoder) {
if (other_encoder == encoder)
continue;
if (WARN_ON(port_mask & BIT(other_encoder->port)))
return;
}
/*
* DSI ports should have their DDI clock ungated when disabled
* and gated when enabled.
*/
ddi_clk_needed = !encoder->base.crtc;
}
val = I915_READ(DPCLKA_CFGCR0_ICL);
for_each_port_masked(port, port_mask) {
bool ddi_clk_ungated = !(val &
icl_dpclka_cfgcr0_clk_off(dev_priv,
port));
if (ddi_clk_needed == ddi_clk_ungated)
continue;
/*
* Punt on the case now where clock is gated, but it would
* be needed by the port. Something else is really broken then.
*/
if (WARN_ON(ddi_clk_needed))
continue;
DRM_NOTE("Port %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
port_name(port));
val |= icl_dpclka_cfgcr0_clk_off(dev_priv, port);
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
}
}
static void intel_ddi_clk_select(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
uint32_t val;
const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
if (WARN_ON(!pll))
return;
mutex_lock(&dev_priv->dpll_lock);
drm/i915: Protect DDI port to DPLL map from theoretical race. In case we have multiple modesets for different connectors happening in parallel we could have a race on the RMW on these shared registers. This possibility was initially raised by Paulo when reviewing commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' but the original possibility comes from commit '5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe later when atomic commits entered into picture. Apparently the discussion around this topic showed that the right solution would be on serializing the atomic commits in a way that we don't have the possibility of races here since if that parallel modeset happenings apparently many other things will be on fire. Code is there since SKL and there was no report of issue, but since we never looked back to that serialization possibility, and also we don't have an igt case for that it is better to at least protect this corner. Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Fixes: 5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
2017-12-16 05:43:10 +07:00
if (IS_ICELAKE(dev_priv)) {
if (!intel_port_is_combophy(dev_priv, port))
I915_WRITE(DDI_CLK_SEL(port),
icl_pll_to_ddi_pll_sel(encoder, crtc_state));
} else if (IS_CANNONLAKE(dev_priv)) {
/* Configure DPCLKA_CFGCR0 to map the DPLL to the DDI. */
val = I915_READ(DPCLKA_CFGCR0);
val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port);
I915_WRITE(DPCLKA_CFGCR0, val);
/*
* Configure DPCLKA_CFGCR0 to turn on the clock for the DDI.
* This step and the step before must be done with separate
* register writes.
*/
val = I915_READ(DPCLKA_CFGCR0);
val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
I915_WRITE(DPCLKA_CFGCR0, val);
} else if (IS_GEN9_BC(dev_priv)) {
/* DDI -> PLL mapping */
val = I915_READ(DPLL_CTRL2);
val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) |
DPLL_CTRL2_DDI_CLK_SEL_MASK(port));
val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->info->id, port) |
DPLL_CTRL2_DDI_SEL_OVERRIDE(port));
I915_WRITE(DPLL_CTRL2, val);
} else if (INTEL_GEN(dev_priv) < 9) {
I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll));
}
drm/i915: Protect DDI port to DPLL map from theoretical race. In case we have multiple modesets for different connectors happening in parallel we could have a race on the RMW on these shared registers. This possibility was initially raised by Paulo when reviewing commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' but the original possibility comes from commit '5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe later when atomic commits entered into picture. Apparently the discussion around this topic showed that the right solution would be on serializing the atomic commits in a way that we don't have the possibility of races here since if that parallel modeset happenings apparently many other things will be on fire. Code is there since SKL and there was no report of issue, but since we never looked back to that serialization possibility, and also we don't have an igt case for that it is better to at least protect this corner. Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Fixes: 5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
2017-12-16 05:43:10 +07:00
mutex_unlock(&dev_priv->dpll_lock);
}
static void intel_ddi_clk_disable(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
if (IS_ICELAKE(dev_priv)) {
if (!intel_port_is_combophy(dev_priv, port))
I915_WRITE(DDI_CLK_SEL(port), DDI_CLK_SEL_NONE);
} else if (IS_CANNONLAKE(dev_priv)) {
I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |
DPCLKA_CFGCR0_DDI_CLK_OFF(port));
} else if (IS_GEN9_BC(dev_priv)) {
I915_WRITE(DPLL_CTRL2, I915_READ(DPLL_CTRL2) |
DPLL_CTRL2_DDI_CLK_OFF(port));
} else if (INTEL_GEN(dev_priv) < 9) {
I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
}
}
static void icl_enable_phy_clock_gating(struct intel_digital_port *dig_port)
{
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
enum port port = dig_port->base.port;
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
i915_reg_t mg_regs[2] = { MG_DP_MODE(port, 0), MG_DP_MODE(port, 1) };
u32 val;
int i;
if (tc_port == PORT_TC_NONE)
return;
for (i = 0; i < ARRAY_SIZE(mg_regs); i++) {
val = I915_READ(mg_regs[i]);
val |= MG_DP_MODE_CFG_TR2PWR_GATING |
MG_DP_MODE_CFG_TRPWR_GATING |
MG_DP_MODE_CFG_CLNPWR_GATING |
MG_DP_MODE_CFG_DIGPWR_GATING |
MG_DP_MODE_CFG_GAONPWR_GATING;
I915_WRITE(mg_regs[i], val);
}
val = I915_READ(MG_MISC_SUS0(tc_port));
val |= MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE(3) |
MG_MISC_SUS0_CFG_TR2PWR_GATING |
MG_MISC_SUS0_CFG_CL2PWR_GATING |
MG_MISC_SUS0_CFG_GAONPWR_GATING |
MG_MISC_SUS0_CFG_TRPWR_GATING |
MG_MISC_SUS0_CFG_CL1PWR_GATING |
MG_MISC_SUS0_CFG_DGPWR_GATING;
I915_WRITE(MG_MISC_SUS0(tc_port), val);
}
static void icl_disable_phy_clock_gating(struct intel_digital_port *dig_port)
{
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
enum port port = dig_port->base.port;
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
i915_reg_t mg_regs[2] = { MG_DP_MODE(port, 0), MG_DP_MODE(port, 1) };
u32 val;
int i;
if (tc_port == PORT_TC_NONE)
return;
for (i = 0; i < ARRAY_SIZE(mg_regs); i++) {
val = I915_READ(mg_regs[i]);
val &= ~(MG_DP_MODE_CFG_TR2PWR_GATING |
MG_DP_MODE_CFG_TRPWR_GATING |
MG_DP_MODE_CFG_CLNPWR_GATING |
MG_DP_MODE_CFG_DIGPWR_GATING |
MG_DP_MODE_CFG_GAONPWR_GATING);
I915_WRITE(mg_regs[i], val);
}
val = I915_READ(MG_MISC_SUS0(tc_port));
val &= ~(MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE_MASK |
MG_MISC_SUS0_CFG_TR2PWR_GATING |
MG_MISC_SUS0_CFG_CL2PWR_GATING |
MG_MISC_SUS0_CFG_GAONPWR_GATING |
MG_MISC_SUS0_CFG_TRPWR_GATING |
MG_MISC_SUS0_CFG_CL1PWR_GATING |
MG_MISC_SUS0_CFG_DGPWR_GATING);
I915_WRITE(MG_MISC_SUS0(tc_port), val);
}
static void icl_program_mg_dp_mode(struct intel_digital_port *intel_dig_port)
{
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
enum port port = intel_dig_port->base.port;
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
u32 ln0, ln1, lane_info;
if (tc_port == PORT_TC_NONE || intel_dig_port->tc_type == TC_PORT_TBT)
return;
ln0 = I915_READ(MG_DP_MODE(port, 0));
ln1 = I915_READ(MG_DP_MODE(port, 1));
switch (intel_dig_port->tc_type) {
case TC_PORT_TYPEC:
ln0 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE);
ln1 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE);
lane_info = (I915_READ(PORT_TX_DFLEXDPSP) &
DP_LANE_ASSIGNMENT_MASK(tc_port)) >>
DP_LANE_ASSIGNMENT_SHIFT(tc_port);
switch (lane_info) {
case 0x1:
case 0x4:
break;
case 0x2:
ln0 |= MG_DP_MODE_CFG_DP_X1_MODE;
break;
case 0x3:
ln0 |= MG_DP_MODE_CFG_DP_X1_MODE |
MG_DP_MODE_CFG_DP_X2_MODE;
break;
case 0x8:
ln1 |= MG_DP_MODE_CFG_DP_X1_MODE;
break;
case 0xC:
ln1 |= MG_DP_MODE_CFG_DP_X1_MODE |
MG_DP_MODE_CFG_DP_X2_MODE;
break;
case 0xF:
ln0 |= MG_DP_MODE_CFG_DP_X1_MODE |
MG_DP_MODE_CFG_DP_X2_MODE;
ln1 |= MG_DP_MODE_CFG_DP_X1_MODE |
MG_DP_MODE_CFG_DP_X2_MODE;
break;
default:
MISSING_CASE(lane_info);
}
break;
case TC_PORT_LEGACY:
ln0 |= MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE;
ln1 |= MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE;
break;
default:
MISSING_CASE(intel_dig_port->tc_type);
return;
}
I915_WRITE(MG_DP_MODE(port, 0), ln0);
I915_WRITE(MG_DP_MODE(port, 1), ln1);
}
static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
if (!crtc_state->fec_enable)
return;
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0)
DRM_DEBUG_KMS("Failed to set FEC_READY in the sink\n");
}
static void intel_ddi_enable_fec(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
u32 val;
if (!crtc_state->fec_enable)
return;
val = I915_READ(DP_TP_CTL(port));
val |= DP_TP_CTL_FEC_ENABLE;
I915_WRITE(DP_TP_CTL(port), val);
if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port),
DP_TP_STATUS_FEC_ENABLE_LIVE,
DP_TP_STATUS_FEC_ENABLE_LIVE,
1))
DRM_ERROR("Timed out waiting for FEC Enable Status\n");
}
static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
u32 val;
if (!crtc_state->fec_enable)
return;
val = I915_READ(DP_TP_CTL(port));
val &= ~DP_TP_CTL_FEC_ENABLE;
I915_WRITE(DP_TP_CTL(port), val);
POSTING_READ(DP_TP_CTL(port));
}
static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
int level = intel_ddi_dp_level(intel_dp);
WARN_ON(is_mst && (port == PORT_A || port == PORT_E));
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count, is_mst);
intel_edp_panel_on(intel_dp);
intel_ddi_clk_select(encoder, crtc_state);
intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
icl_program_mg_dp_mode(dig_port);
icl_disable_phy_clock_gating(dig_port);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
if (IS_ICELAKE(dev_priv))
icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
level, encoder->type);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
else if (IS_CANNONLAKE(dev_priv))
cnl_ddi_vswing_sequence(encoder, level, encoder->type);
else if (IS_GEN9_LP(dev_priv))
bxt_ddi_vswing_sequence(encoder, level, encoder->type);
else
intel_prepare_dp_ddi_buffers(encoder, crtc_state);
intel_ddi_init_dp_buf_reg(encoder);
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 08:10:53 +07:00
if (!is_mst)
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
true);
intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
intel_dp_start_link_train(intel_dp);
if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
intel_dp_stop_link_train(intel_dp);
intel_ddi_enable_fec(encoder, crtc_state);
icl_enable_phy_clock_gating(dig_port);
if (!is_mst)
intel_ddi_enable_pipe_clock(crtc_state);
intel_dsc_enable(encoder, crtc_state);
}
static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int level = intel_ddi_hdmi_level(dev_priv, port);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
intel_ddi_clk_select(encoder, crtc_state);
intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
icl_program_mg_dp_mode(dig_port);
icl_disable_phy_clock_gating(dig_port);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
if (IS_ICELAKE(dev_priv))
icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
level, INTEL_OUTPUT_HDMI);
drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
2018-03-29 04:58:02 +07:00
else if (IS_CANNONLAKE(dev_priv))
cnl_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI);
else if (IS_GEN9_LP(dev_priv))
bxt_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI);
else
intel_prepare_hdmi_ddi_buffers(encoder, level);
icl_enable_phy_clock_gating(dig_port);
if (IS_GEN9_BC(dev_priv))
skl_ddi_set_iboost(encoder, level, INTEL_OUTPUT_HDMI);
intel_ddi_enable_pipe_clock(crtc_state);
intel_dig_port->set_infoframes(encoder,
crtc_state->has_infoframe,
crtc_state, conn_state);
}
static void intel_ddi_pre_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
/*
* When called from DP MST code:
* - conn_state will be NULL
* - encoder will be the main encoder (ie. mst->primary)
* - the main connector associated with this port
* won't be active or linked to a crtc
* - crtc_state will be the state of the first stream to
* be activated on this port, and it may not be the same
* stream that will be deactivated last, but each stream
* should have a state that is identical when it comes to
* the DP link parameteres
*/
WARN_ON(crtc_state->has_pch_encoder);
if (INTEL_GEN(dev_priv) >= 11)
icl_map_plls_to_ports(encoder, crtc_state);
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
intel_ddi_pre_enable_hdmi(encoder, crtc_state, conn_state);
} else {
struct intel_lspcon *lspcon =
enc_to_intel_lspcon(&encoder->base);
intel_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
if (lspcon->active) {
struct intel_digital_port *dig_port =
enc_to_dig_port(&encoder->base);
dig_port->set_infoframes(encoder,
crtc_state->has_infoframe,
crtc_state, conn_state);
}
}
}
static void intel_disable_ddi_buf(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
bool wait = false;
u32 val;
val = I915_READ(DDI_BUF_CTL(port));
if (val & DDI_BUF_CTL_ENABLE) {
val &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), val);
wait = true;
}
val = I915_READ(DP_TP_CTL(port));
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(port), val);
/* Disable FEC in DP Sink */
intel_ddi_disable_fec_state(encoder, crtc_state);
if (wait)
intel_wait_ddi_buf_idle(dev_priv, port);
}
static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
struct intel_dp *intel_dp = &dig_port->dp;
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 08:10:53 +07:00
bool is_mst = intel_crtc_has_type(old_crtc_state,
INTEL_OUTPUT_DP_MST);
if (!is_mst) {
intel_ddi_disable_pipe_clock(old_crtc_state);
/*
* Power down sink before disabling the port, otherwise we end
* up getting interrupts from the sink on detecting link loss.
*/
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 08:10:53 +07:00
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
}
intel_disable_ddi_buf(encoder, old_crtc_state);
drm/i915/ddi: Avoid long delays during system suspend / eDP disabling Atm disabling either DP or eDP outputs can generate a spurious short pulse interrupt. The reason is that after disabling the port the source will stop sending a valid stream data, while the sink expects either a valid stream or the idle pattern. Since neither of this is sent the sink assumes (after an arbitrary delay) that the link is lost and requests for link retraining with a short pulse. The spurious pulse is a real problem at least for eDP panels with long power-off / power-cycle delays: as part of disabling the output we disable the panel power. The subsequent spurious short pulse handling will have to turn the power back on, which means the driver has to do a redundant wait for the power-off and power-cycle delays. During system suspend this leads to an unnecessary delay up to ~1s on systems with such panels as reported by Rui. To fix this put the sink to DPMS D3 state before turning off the port. According to the DP spec in this state the sink should not request retraining. This is also what we do already on pre-ddi platforms. As an alternative I also tried configuring the port to send idle pattern - which is against BSPec - and leave the port in normal mode before turning off the port. Neither of these resolved the problem. Cc: Zhang Rui <rui.zhang@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496250335-7627-1-git-send-email-imre.deak@intel.com
2017-06-01 00:05:35 +07:00
intel_edp_panel_vdd_on(intel_dp);
intel_edp_panel_off(intel_dp);
intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain);
intel_ddi_clk_disable(encoder);
}
static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
struct intel_hdmi *intel_hdmi = &dig_port->hdmi;
dig_port->set_infoframes(encoder, false,
old_crtc_state, old_conn_state);
intel_ddi_disable_pipe_clock(old_crtc_state);
intel_disable_ddi_buf(encoder, old_crtc_state);
intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain);
intel_ddi_clk_disable(encoder);
intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
}
static void intel_ddi_post_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
/*
* When called from DP MST code:
* - old_conn_state will be NULL
* - encoder will be the main encoder (ie. mst->primary)
* - the main connector associated with this port
* won't be active or linked to a crtc
* - old_crtc_state will be the state of the last stream to
* be deactivated on this port, and it may not be the same
* stream that was activated last, but each stream
* should have a state that is identical when it comes to
* the DP link parameteres
*/
if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
intel_ddi_post_disable_hdmi(encoder,
old_crtc_state, old_conn_state);
else
intel_ddi_post_disable_dp(encoder,
old_crtc_state, old_conn_state);
if (INTEL_GEN(dev_priv) >= 11)
icl_unmap_plls_to_ports(encoder);
}
void intel_ddi_fdi_post_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
uint32_t val;
/*
* Bspec lists this as both step 13 (before DDI_BUF_CTL disable)
* and step 18 (after clearing PORT_CLK_SEL). Based on a BUN,
* step 13 is the correct place for it. Step 18 is where it was
* originally before the BUN.
*/
val = I915_READ(FDI_RX_CTL(PIPE_A));
val &= ~FDI_RX_ENABLE;
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
intel_disable_ddi_buf(encoder, old_crtc_state);
intel_ddi_clk_disable(encoder);
val = I915_READ(FDI_RX_MISC(PIPE_A));
val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
I915_WRITE(FDI_RX_MISC(PIPE_A), val);
val = I915_READ(FDI_RX_CTL(PIPE_A));
val &= ~FDI_PCDCLK;
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
val = I915_READ(FDI_RX_CTL(PIPE_A));
val &= ~FDI_RX_PLL_ENABLE;
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
}
static void intel_enable_ddi_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = encoder->port;
if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
intel_dp_stop_link_train(intel_dp);
intel_edp_backlight_on(crtc_state, conn_state);
intel_psr_enable(intel_dp, crtc_state);
intel_edp_drrs_enable(intel_dp, crtc_state);
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 16:57:41 +07:00
if (crtc_state->has_audio)
intel_audio_codec_enable(encoder, crtc_state, conn_state);
}
static i915_reg_t
gen9_chicken_trans_reg_by_port(struct drm_i915_private *dev_priv,
enum port port)
{
static const i915_reg_t regs[] = {
[PORT_A] = CHICKEN_TRANS_EDP,
[PORT_B] = CHICKEN_TRANS_A,
[PORT_C] = CHICKEN_TRANS_B,
[PORT_D] = CHICKEN_TRANS_C,
[PORT_E] = CHICKEN_TRANS_A,
};
WARN_ON(INTEL_GEN(dev_priv) < 9);
if (WARN_ON(port < PORT_A || port > PORT_E))
port = PORT_A;
return regs[port];
}
static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
struct drm_connector *connector = conn_state->connector;
enum port port = encoder->port;
if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
crtc_state->hdmi_high_tmds_clock_ratio,
crtc_state->hdmi_scrambling))
DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
connector->base.id, connector->name);
/* Display WA #1143: skl,kbl,cfl */
if (IS_GEN9_BC(dev_priv)) {
/*
* For some reason these chicken bits have been
* stuffed into a transcoder register, event though
* the bits affect a specific DDI port rather than
* a specific transcoder.
*/
i915_reg_t reg = gen9_chicken_trans_reg_by_port(dev_priv, port);
u32 val;
val = I915_READ(reg);
if (port == PORT_E)
val |= DDIE_TRAINING_OVERRIDE_ENABLE |
DDIE_TRAINING_OVERRIDE_VALUE;
else
val |= DDI_TRAINING_OVERRIDE_ENABLE |
DDI_TRAINING_OVERRIDE_VALUE;
I915_WRITE(reg, val);
POSTING_READ(reg);
udelay(1);
if (port == PORT_E)
val &= ~(DDIE_TRAINING_OVERRIDE_ENABLE |
DDIE_TRAINING_OVERRIDE_VALUE);
else
val &= ~(DDI_TRAINING_OVERRIDE_ENABLE |
DDI_TRAINING_OVERRIDE_VALUE);
I915_WRITE(reg, val);
}
/* In HDMI/DVI mode, the port width, and swing/emphasis values
* are ignored so nothing special needs to be done besides
* enabling the port.
*/
I915_WRITE(DDI_BUF_CTL(port),
dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE);
if (crtc_state->has_audio)
intel_audio_codec_enable(encoder, crtc_state, conn_state);
}
static void intel_enable_ddi(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
else
intel_enable_ddi_dp(encoder, crtc_state, conn_state);
drm/i915: Add HDCP framework + base implementation This patch adds the framework required to add HDCP support to intel connectors. It implements Aksv loading from fuse, and parts 1/2/3 of the HDCP authentication scheme. Note that without shim implementations, this does not actually implement HDCP. That will come in subsequent patches. Changes in v2: - Don't open code wait_fors (Chris) - drm_hdcp.c under MIT license (Daniel) - Move intel_hdcp_disable() call above ddi_disable (Ram) - Fix // comments (I wore a cone of shame for 12 hours to atone) (Daniel) - Justify intel_hdcp_shim with comments (Daniel) - Fixed async locking issues by adding hdcp_mutex (Daniel) - Don't alter connector_state in enable/disable (Daniel) Changes in v3: - Added hdcp_mutex/hdcp_value to make async reasonable - Added hdcp_prop_work to separate link checking & property setting - Added new helper for atomic_check state tracking (Daniel) - Moved enable/disable into atomic_commit with matching helpers - Moved intel_hdcp_check_link out of all locks when called from dp - Bumped up ksv_fifo timeout (noticed failure on one of my dongles) Changes in v4: - Remove SKL_ prefix from most register names (Daniel) - Move enable/disable back to modeset path (Daniel) - s/get_random_long/get_random_u32/ (Daniel) - Remove mode_config.mutex lock in prop_work (Daniel) - Add intel_hdcp_init to handle init of conn components (Daniel) - Actually check return value of attach_property - Check Bksv is valid before trying to authenticate (Ram) Changes in v5: - checkpatch whitespace changes - s/DRM_MODE_CONTENT_PROTECTION_OFF/DRM_MODE_CONTENT_PROTECTION_UNDESIRED/ - Fix ksv list wait timeout (actually wait 5s) - Increase the R0 timeout to 300ms (Ram) Changes in v6: - SPDX license Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ramalingam C <ramalingm.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-6-seanpaul@chromium.org
2018-01-09 02:55:39 +07:00
/* Enable hdcp if it's desired */
if (conn_state->content_protection ==
DRM_MODE_CONTENT_PROTECTION_DESIRED)
intel_hdcp_enable(to_intel_connector(conn_state->connector));
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
}
static void intel_disable_ddi_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
intel_dp->link_trained = false;
drm/i915: Fix POWER_DOMAIN_AUDIO refcounting. If the crtc was brought up with audio before the driver loads, then crtc_disable will remove a refcount to audio that doesn't exist before. Fortunately we already set power domains on readout, so we can just add the power domain handling to get_crtc_power_domains, which will update the power domains correctly in all cases. This was found when testing module reload on CI with the crtc enabled, which resulted in the following warn after module reload + modeset: [ 24.197041] ------------[ cut here ]------------ [ 24.197075] WARNING: CPU: 0 PID: 99 at drivers/gpu/drm/i915/intel_runtime_pm.c:1790 intel_display_power_put+0x134/0x140 [i915] [ 24.197076] Use count on domain AUDIO is already zero [ 24.197098] CPU: 0 PID: 99 Comm: kworker/u8:2 Not tainted 4.9.0-CI-Trybot_393+ #1 [ 24.197099] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0042.2016.0409.1246 04/09/2016 [ 24.197102] Workqueue: events_unbound async_run_entry_fn [ 24.197105] ffffc900003c7688 ffffffff81435b35 ffffc900003c76d8 0000000000000000 [ 24.197107] ffffc900003c76c8 ffffffff8107e4d6 000006fe5dc36f28 ffff88025dc30054 [ 24.197109] ffff88025dc36f28 ffff88025dc30000 ffff88025dc30000 0000000000000015 [ 24.197110] Call Trace: [ 24.197113] [<ffffffff81435b35>] dump_stack+0x67/0x92 [ 24.197116] [<ffffffff8107e4d6>] __warn+0xc6/0xe0 [ 24.197118] [<ffffffff8107e53a>] warn_slowpath_fmt+0x4a/0x50 [ 24.197149] [<ffffffffa039b4b4>] intel_display_power_put+0x134/0x140 [i915] [ 24.197187] [<ffffffffa04217dd>] intel_disable_ddi+0x4d/0x80 [i915] [ 24.197223] [<ffffffffa03f388f>] intel_encoders_disable.isra.74+0x7f/0x90 [i915] [ 24.197257] [<ffffffffa03f6c05>] haswell_crtc_disable+0x55/0x170 [i915] [ 24.197292] [<ffffffffa03fec88>] intel_atomic_commit_tail+0x108/0xfd0 [i915] [ 24.197295] [<ffffffff810d47c6>] ? __lock_is_held+0x66/0x90 [ 24.197330] [<ffffffffa03fff79>] intel_atomic_commit+0x429/0x560 [i915] [ 24.197332] [<ffffffff81570186>] ?drm_atomic_add_affected_connectors+0x56/0xf0 [ 24.197334] [<ffffffff8156f726>] drm_atomic_commit+0x46/0x50 [ 24.197336] [<ffffffff81553f87>] restore_fbdev_mode+0x147/0x270 [ 24.197337] [<ffffffff81555bee>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [ 24.197339] [<ffffffff81555aa8>] drm_fb_helper_set_par+0x28/0x50 [ 24.197374] [<ffffffffa041c7d3>] intel_fbdev_set_par+0x13/0x70 [i915] [ 24.197376] [<ffffffff8149e07a>] fbcon_init+0x57a/0x600 [ 24.197379] [<ffffffff81514b71>] visual_init+0xd1/0x130 [ 24.197381] [<ffffffff8151603c>] do_bind_con_driver+0x1bc/0x3a0 [ 24.197384] [<ffffffff81516521>] do_take_over_console+0x111/0x180 [ 24.197386] [<ffffffff8149e152>] do_fbcon_takeover+0x52/0xb0 [ 24.197387] [<ffffffff814a12c3>] fbcon_event_notify+0x723/0x850 [ 24.197390] [<ffffffff810a4830>] ?__blocking_notifier_call_chain+0x30/0x70 [ 24.197392] [<ffffffff810a44a4>] notifier_call_chain+0x34/0xa0 [ 24.197394] [<ffffffff810a4848>] __blocking_notifier_call_chain+0x48/0x70 [ 24.197397] [<ffffffff810a4881>] blocking_notifier_call_chain+0x11/0x20 [ 24.197398] [<ffffffff814a4556>] fb_notifier_call_chain+0x16/0x20 [ 24.197400] [<ffffffff814a678c>] register_framebuffer+0x24c/0x330 [ 24.197402] [<ffffffff815558d9>] drm_fb_helper_initial_config+0x219/0x3c0 [ 24.197436] [<ffffffffa041d373>] intel_fbdev_initial_config+0x13/0x30 [i915] [ 24.197438] [<ffffffff810a5d44>] async_run_entry_fn+0x34/0x140 [ 24.197440] [<ffffffff8109c26c>] process_one_work+0x1ec/0x6b0 [ 24.197442] [<ffffffff8109c1e6>] ? process_one_work+0x166/0x6b0 [ 24.197445] [<ffffffff8109c779>] worker_thread+0x49/0x490 [ 24.197447] [<ffffffff8109c730>] ? process_one_work+0x6b0/0x6b0 [ 24.197448] [<ffffffff810a2a9b>] kthread+0xeb/0x110 [ 24.197451] [<ffffffff810a29b0>] ? kthread_park+0x60/0x60 [ 24.197453] [<ffffffff818241a7>] ret_from_fork+0x27/0x40 [ 24.197476] ---[ end trace bda64b683b8e8162 ]--- Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-15 21:29:43 +07:00
if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
intel_edp_drrs_disable(intel_dp, old_crtc_state);
intel_psr_disable(intel_dp, old_crtc_state);
intel_edp_backlight_off(old_conn_state);
/* Disable the decompression in DP Sink */
intel_dp_sink_set_decompression_state(intel_dp, old_crtc_state,
false);
}
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_connector *connector = old_conn_state->connector;
if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
false, false))
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
connector->base.id, connector->name);
}
static void intel_disable_ddi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
drm/i915: Add HDCP framework + base implementation This patch adds the framework required to add HDCP support to intel connectors. It implements Aksv loading from fuse, and parts 1/2/3 of the HDCP authentication scheme. Note that without shim implementations, this does not actually implement HDCP. That will come in subsequent patches. Changes in v2: - Don't open code wait_fors (Chris) - drm_hdcp.c under MIT license (Daniel) - Move intel_hdcp_disable() call above ddi_disable (Ram) - Fix // comments (I wore a cone of shame for 12 hours to atone) (Daniel) - Justify intel_hdcp_shim with comments (Daniel) - Fixed async locking issues by adding hdcp_mutex (Daniel) - Don't alter connector_state in enable/disable (Daniel) Changes in v3: - Added hdcp_mutex/hdcp_value to make async reasonable - Added hdcp_prop_work to separate link checking & property setting - Added new helper for atomic_check state tracking (Daniel) - Moved enable/disable into atomic_commit with matching helpers - Moved intel_hdcp_check_link out of all locks when called from dp - Bumped up ksv_fifo timeout (noticed failure on one of my dongles) Changes in v4: - Remove SKL_ prefix from most register names (Daniel) - Move enable/disable back to modeset path (Daniel) - s/get_random_long/get_random_u32/ (Daniel) - Remove mode_config.mutex lock in prop_work (Daniel) - Add intel_hdcp_init to handle init of conn components (Daniel) - Actually check return value of attach_property - Check Bksv is valid before trying to authenticate (Ram) Changes in v5: - checkpatch whitespace changes - s/DRM_MODE_CONTENT_PROTECTION_OFF/DRM_MODE_CONTENT_PROTECTION_UNDESIRED/ - Fix ksv list wait timeout (actually wait 5s) - Increase the R0 timeout to 300ms (Ram) Changes in v6: - SPDX license Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ramalingam C <ramalingm.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-6-seanpaul@chromium.org
2018-01-09 02:55:39 +07:00
intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
else
intel_disable_ddi_dp(encoder, old_crtc_state, old_conn_state);
}
static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
enum port port)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
switch (pipe_config->lane_count) {
case 1:
val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
DFLEXDPMLE1_DPMLETC_ML0(tc_port);
break;
case 2:
val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
break;
case 4:
val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port);
break;
default:
MISSING_CASE(pipe_config->lane_count);
}
I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
}
static void
intel_ddi_pre_pll_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
enum port port = encoder->port;
if (intel_crtc_has_dp_encoder(crtc_state) ||
intel_port_is_tc(dev_priv, encoder->port))
intel_display_power_get(dev_priv,
intel_ddi_main_link_aux_domain(dig_port));
if (IS_GEN9_LP(dev_priv))
bxt_ddi_phy_set_lane_optim_mask(encoder,
crtc_state->lane_lat_optim_mask);
/*
* Program the lane count for static/dynamic connections on Type-C ports.
* Skip this step for TBT.
*/
if (dig_port->tc_type == TC_PORT_UNKNOWN ||
dig_port->tc_type == TC_PORT_TBT)
return;
intel_ddi_set_fia_lane_count(encoder, crtc_state, port);
}
static void
intel_ddi_post_pll_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
if (intel_crtc_has_dp_encoder(crtc_state) ||
intel_port_is_tc(dev_priv, encoder->port))
intel_display_power_put(dev_priv,
intel_ddi_main_link_aux_domain(dig_port));
}
void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv =
to_i915(intel_dig_port->base.base.dev);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
enum port port = intel_dig_port->base.port;
uint32_t val;
bool wait = false;
if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) {
val = I915_READ(DDI_BUF_CTL(port));
if (val & DDI_BUF_CTL_ENABLE) {
val &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), val);
wait = true;
}
val = I915_READ(DP_TP_CTL(port));
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(port), val);
POSTING_READ(DP_TP_CTL(port));
if (wait)
intel_wait_ddi_buf_idle(dev_priv, port);
}
2014-05-02 11:02:48 +07:00
val = DP_TP_CTL_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE;
if (intel_dp->link_mst)
2014-05-02 11:02:48 +07:00
val |= DP_TP_CTL_MODE_MST;
else {
val |= DP_TP_CTL_MODE_SST;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE;
}
I915_WRITE(DP_TP_CTL(port), val);
POSTING_READ(DP_TP_CTL(port));
intel_dp->DP |= DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP);
POSTING_READ(DDI_BUF_CTL(port));
udelay(600);
}
static bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv,
enum transcoder cpu_transcoder)
{
if (cpu_transcoder == TRANSCODER_EDP)
return false;
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO))
return false;
return I915_READ(HSW_AUD_PIN_ELD_CP_VLD) &
AUDIO_OUTPUT_ENABLE(cpu_transcoder);
}
void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv,
struct intel_crtc_state *crtc_state)
{
if (IS_ICELAKE(dev_priv) && crtc_state->port_clock > 594000)
crtc_state->min_voltage_level = 1;
else if (IS_CANNONLAKE(dev_priv) && crtc_state->port_clock > 594000)
crtc_state->min_voltage_level = 2;
}
void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
struct intel_digital_port *intel_dig_port;
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
return;
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (temp & TRANS_DDI_PHSYNC)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (temp & TRANS_DDI_PVSYNC)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->base.adjusted_mode.flags |= flags;
switch (temp & TRANS_DDI_BPC_MASK) {
case TRANS_DDI_BPC_6:
pipe_config->pipe_bpp = 18;
break;
case TRANS_DDI_BPC_8:
pipe_config->pipe_bpp = 24;
break;
case TRANS_DDI_BPC_10:
pipe_config->pipe_bpp = 30;
break;
case TRANS_DDI_BPC_12:
pipe_config->pipe_bpp = 36;
break;
default:
break;
}
switch (temp & TRANS_DDI_MODE_SELECT_MASK) {
case TRANS_DDI_MODE_SELECT_HDMI:
pipe_config->has_hdmi_sink = true;
intel_dig_port = enc_to_dig_port(&encoder->base);
if (intel_dig_port->infoframe_enabled(encoder, pipe_config))
pipe_config->has_infoframe = true;
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
if ((temp & TRANS_DDI_HDMI_SCRAMBLING_MASK) ==
TRANS_DDI_HDMI_SCRAMBLING_MASK)
pipe_config->hdmi_scrambling = true;
if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE)
pipe_config->hdmi_high_tmds_clock_ratio = true;
/* fall through */
case TRANS_DDI_MODE_SELECT_DVI:
pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
pipe_config->lane_count = 4;
break;
case TRANS_DDI_MODE_SELECT_FDI:
pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
break;
case TRANS_DDI_MODE_SELECT_DP_SST:
if (encoder->type == INTEL_OUTPUT_EDP)
pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
else
pipe_config->output_types |= BIT(INTEL_OUTPUT_DP);
pipe_config->lane_count =
((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
intel_dp_get_m_n(intel_crtc, pipe_config);
break;
case TRANS_DDI_MODE_SELECT_DP_MST:
pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
pipe_config->lane_count =
((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
intel_dp_get_m_n(intel_crtc, pipe_config);
break;
default:
break;
}
pipe_config->has_audio =
intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp &&
pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
/*
* This is a big fat ugly hack.
*
* Some machines in UEFI boot mode provide us a VBT that has 18
* bpp and 1.62 GHz link bandwidth for eDP, which for reasons
* unknown we fail to light up. Yet the same BIOS boots up with
* 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
* max, not what it tells us to use.
*
* Note: This will still be broken if the eDP panel is not lit
* up by the BIOS, and thus we can't get the mode at module
* load.
*/
DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
}
intel_ddi_clock_get(encoder, pipe_config);
if (IS_GEN9_LP(dev_priv))
pipe_config->lane_lat_optim_mask =
bxt_ddi_phy_get_lane_lat_optim_mask(encoder);
intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
}
drm/i915: Stop frobbing with DDI encoder->type Currently the DDI encoder->type will change at runtime depending on what kind of hotplugs we've processed. That's quite bad since we can't really trust that that current value of encoder->type actually matches the type of signal we're trying to drive through it. Let's eliminate that problem by declaring that non-eDP DDI port will always have the encoder type as INTEL_OUTPUT_DDI. This means the code can no longer try to distinguish DP vs. HDMI based on encoder->type. We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and there's a bunch of code that relies on that value to identify eDP encoders. We'll introduce a new encoder .compute_output_type() hook. This allows us to compute the full output_types before any encoder .compute_config() hooks get called, thus those hooks can rely on output_types being correct, which is useful for cloning on oldr platforms. For now we'll just look at the connector type and pick the correct mode based on that. In the future the new hook could be used to implement dynamic switching between LS and PCON modes for LSPCON. v2: Fix BXT/GLK PPS explosion with DSI/MST encoders v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg v4: Rebase v5: Populate output_types in .get_config() rather than in the caller v5: Split out populating output_types in .get_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-28 02:31:24 +07:00
static enum intel_output_type
intel_ddi_compute_output_type(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
switch (conn_state->connector->connector_type) {
case DRM_MODE_CONNECTOR_HDMIA:
return INTEL_OUTPUT_HDMI;
case DRM_MODE_CONNECTOR_eDP:
return INTEL_OUTPUT_EDP;
case DRM_MODE_CONNECTOR_DisplayPort:
return INTEL_OUTPUT_DP;
default:
MISSING_CASE(conn_state->connector->connector_type);
return INTEL_OUTPUT_UNUSED;
}
}
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum port port = encoder->port;
int ret;
if (port == PORT_A)
pipe_config->cpu_transcoder = TRANSCODER_EDP;
drm/i915: Stop frobbing with DDI encoder->type Currently the DDI encoder->type will change at runtime depending on what kind of hotplugs we've processed. That's quite bad since we can't really trust that that current value of encoder->type actually matches the type of signal we're trying to drive through it. Let's eliminate that problem by declaring that non-eDP DDI port will always have the encoder type as INTEL_OUTPUT_DDI. This means the code can no longer try to distinguish DP vs. HDMI based on encoder->type. We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and there's a bunch of code that relies on that value to identify eDP encoders. We'll introduce a new encoder .compute_output_type() hook. This allows us to compute the full output_types before any encoder .compute_config() hooks get called, thus those hooks can rely on output_types being correct, which is useful for cloning on oldr platforms. For now we'll just look at the connector type and pick the correct mode based on that. In the future the new hook could be used to implement dynamic switching between LS and PCON modes for LSPCON. v2: Fix BXT/GLK PPS explosion with DSI/MST encoders v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg v4: Rebase v5: Populate output_types in .get_config() rather than in the caller v5: Split out populating output_types in .get_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-28 02:31:24 +07:00
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
else
ret = intel_dp_compute_config(encoder, pipe_config, conn_state);
if (IS_GEN9_LP(dev_priv) && ret)
pipe_config->lane_lat_optim_mask =
bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count);
intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
return ret;
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
.reset = intel_dp_encoder_reset,
.destroy = intel_dp_encoder_destroy,
};
static struct intel_connector *
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
{
struct intel_connector *connector;
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
enum port port = intel_dig_port->base.port;
connector = intel_connector_alloc();
if (!connector)
return NULL;
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
if (!intel_dp_init_connector(intel_dig_port, connector)) {
kfree(connector);
return NULL;
}
return connector;
}
static int modeset_pipe(struct drm_crtc *crtc,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_crtc_state *crtc_state;
int ret;
state = drm_atomic_state_alloc(crtc->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto out;
}
crtc_state->mode_changed = true;
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret)
goto out;
ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
goto out;
ret = drm_atomic_commit(state);
if (ret)
goto out;
return 0;
out:
drm_atomic_state_put(state);
return ret;
}
static int intel_hdmi_reset_link(struct intel_encoder *encoder,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_hdmi *hdmi = enc_to_intel_hdmi(&encoder->base);
struct intel_connector *connector = hdmi->attached_connector;
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
struct drm_connector_state *conn_state;
struct intel_crtc_state *crtc_state;
struct intel_crtc *crtc;
u8 config;
int ret;
if (!connector || connector->base.status != connector_status_connected)
return 0;
ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
ctx);
if (ret)
return ret;
conn_state = connector->base.state;
crtc = to_intel_crtc(conn_state->crtc);
if (!crtc)
return 0;
ret = drm_modeset_lock(&crtc->base.mutex, ctx);
if (ret)
return ret;
crtc_state = to_intel_crtc_state(crtc->base.state);
WARN_ON(!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI));
if (!crtc_state->base.active)
return 0;
if (!crtc_state->hdmi_high_tmds_clock_ratio &&
!crtc_state->hdmi_scrambling)
return 0;
if (conn_state->commit &&
!try_wait_for_completion(&conn_state->commit->hw_done))
return 0;
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
if (ret < 0) {
DRM_ERROR("Failed to read TMDS config: %d\n", ret);
return 0;
}
if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) ==
crtc_state->hdmi_high_tmds_clock_ratio &&
!!(config & SCDC_SCRAMBLING_ENABLE) ==
crtc_state->hdmi_scrambling)
return 0;
/*
* HDMI 2.0 says that one should not send scrambled data
* prior to configuring the sink scrambling, and that
* TMDS clock/data transmission should be suspended when
* changing the TMDS clock rate in the sink. So let's
* just do a full modeset here, even though some sinks
* would be perfectly happy if were to just reconfigure
* the SCDC settings on the fly.
*/
return modeset_pipe(&crtc->base, ctx);
}
static bool intel_ddi_hotplug(struct intel_encoder *encoder,
struct intel_connector *connector)
{
struct drm_modeset_acquire_ctx ctx;
bool changed;
int ret;
changed = intel_encoder_hotplug(encoder, connector);
drm_modeset_acquire_init(&ctx, 0);
for (;;) {
if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA)
ret = intel_hdmi_reset_link(encoder, &ctx);
else
ret = intel_dp_retrain_link(encoder, &ctx);
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
continue;
}
break;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
WARN(ret, "Acquiring modeset locks failed with %i\n", ret);
return changed;
}
static struct intel_connector *
intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port)
{
struct intel_connector *connector;
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
enum port port = intel_dig_port->base.port;
connector = intel_connector_alloc();
if (!connector)
return NULL;
intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port);
intel_hdmi_init_connector(intel_dig_port, connector);
return connector;
}
drm/i915/cnl: Force DDI_A_4_LANES when needed. As we faced in BXT, on CNL DDI_A_4_LANES is not set as expected when system is boot with multiple monitors connected. This result in wrong lane setup impacting the max data rate available and consequently blocking modeset on eDP, resulting in a blank screen. Most of CNL SKUs don't support DDI-E. The only SKU that supports DDI-E is the same that supports the full A/E split called DDI-F. Also when DDI-F is used DDI-E cannot be used because they share Interrupts. So DDI-E is almost useless. Anyways let's consider this is possible and rely on VBT for that. This patch was initialy start by Clint, but required many changes including full commit message. So Credits entirely to Clint for finding this. v2: Extract all messy conditions into a helper function as suggested by Ville. Along with simplification I removed the debug message on the working case since now all conditions are grouped. v3: Split the conditions even more as suggested by Ville. Get's cleaner and easier to add new cases in the future. Suggested-by: Clint Taylor <clinton.a.taylor@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023173920.22890-1-rodrigo.vivi@intel.com
2017-10-24 00:39:20 +07:00
static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dport)
{
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
if (dport->base.port != PORT_A)
drm/i915/cnl: Force DDI_A_4_LANES when needed. As we faced in BXT, on CNL DDI_A_4_LANES is not set as expected when system is boot with multiple monitors connected. This result in wrong lane setup impacting the max data rate available and consequently blocking modeset on eDP, resulting in a blank screen. Most of CNL SKUs don't support DDI-E. The only SKU that supports DDI-E is the same that supports the full A/E split called DDI-F. Also when DDI-F is used DDI-E cannot be used because they share Interrupts. So DDI-E is almost useless. Anyways let's consider this is possible and rely on VBT for that. This patch was initialy start by Clint, but required many changes including full commit message. So Credits entirely to Clint for finding this. v2: Extract all messy conditions into a helper function as suggested by Ville. Along with simplification I removed the debug message on the working case since now all conditions are grouped. v3: Split the conditions even more as suggested by Ville. Get's cleaner and easier to add new cases in the future. Suggested-by: Clint Taylor <clinton.a.taylor@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023173920.22890-1-rodrigo.vivi@intel.com
2017-10-24 00:39:20 +07:00
return false;
if (dport->saved_port_bits & DDI_A_4_LANES)
return false;
/* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only
* supported configuration
*/
if (IS_GEN9_LP(dev_priv))
return true;
/* Cannonlake: Most of SKUs don't support DDI_E, and the only
* one who does also have a full A/E split called
* DDI_F what makes DDI_E useless. However for this
* case let's trust VBT info.
*/
if (IS_CANNONLAKE(dev_priv) &&
!intel_bios_is_port_present(dev_priv, PORT_E))
return true;
return false;
}
static int
intel_ddi_max_lanes(struct intel_digital_port *intel_dport)
{
struct drm_i915_private *dev_priv = to_i915(intel_dport->base.base.dev);
enum port port = intel_dport->base.port;
int max_lanes = 4;
if (INTEL_GEN(dev_priv) >= 11)
return max_lanes;
if (port == PORT_A || port == PORT_E) {
if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
max_lanes = port == PORT_A ? 4 : 0;
else
/* Both A and E share 2 lanes */
max_lanes = 2;
}
/*
* Some BIOS might fail to set this bit on port A if eDP
* wasn't lit up at boot. Force this bit set when needed
* so we use the proper lane count for our calculations.
*/
if (intel_ddi_a_force_4_lanes(intel_dport)) {
DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n");
intel_dport->saved_port_bits |= DDI_A_4_LANES;
max_lanes = 4;
}
return max_lanes;
}
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
{
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
bool init_hdmi, init_dp, init_lspcon = false;
enum pipe pipe;
init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi ||
dev_priv->vbt.ddi_port_info[port].supports_hdmi);
init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp;
if (intel_bios_is_lspcon_present(dev_priv, port)) {
/*
* Lspcon device needs to be driven with DP connector
* with special detection sequence. So make sure DP
* is initialized before lspcon.
*/
init_dp = true;
init_lspcon = true;
init_hdmi = false;
DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
}
if (!init_dp && !init_hdmi) {
DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
port_name(port));
return;
}
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
if (!intel_dig_port)
return;
intel_encoder = &intel_dig_port->base;
encoder = &intel_encoder->base;
drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
intel_encoder->hotplug = intel_ddi_hotplug;
drm/i915: Stop frobbing with DDI encoder->type Currently the DDI encoder->type will change at runtime depending on what kind of hotplugs we've processed. That's quite bad since we can't really trust that that current value of encoder->type actually matches the type of signal we're trying to drive through it. Let's eliminate that problem by declaring that non-eDP DDI port will always have the encoder type as INTEL_OUTPUT_DDI. This means the code can no longer try to distinguish DP vs. HDMI based on encoder->type. We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and there's a bunch of code that relies on that value to identify eDP encoders. We'll introduce a new encoder .compute_output_type() hook. This allows us to compute the full output_types before any encoder .compute_config() hooks get called, thus those hooks can rely on output_types being correct, which is useful for cloning on oldr platforms. For now we'll just look at the connector type and pick the correct mode based on that. In the future the new hook could be used to implement dynamic switching between LS and PCON modes for LSPCON. v2: Fix BXT/GLK PPS explosion with DSI/MST encoders v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg v4: Rebase v5: Populate output_types in .get_config() rather than in the caller v5: Split out populating output_types in .get_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-28 02:31:24 +07:00
intel_encoder->compute_output_type = intel_ddi_compute_output_type;
intel_encoder->compute_config = intel_ddi_compute_config;
intel_encoder->enable = intel_enable_ddi;
intel_encoder->pre_pll_enable = intel_ddi_pre_pll_enable;
intel_encoder->post_pll_disable = intel_ddi_post_pll_disable;
intel_encoder->pre_enable = intel_ddi_pre_enable;
intel_encoder->disable = intel_disable_ddi;
intel_encoder->post_disable = intel_ddi_post_disable;
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
intel_encoder->get_config = intel_ddi_get_config;
intel_encoder->suspend = intel_dp_encoder_suspend;
intel_encoder->get_power_domains = intel_ddi_get_power_domains;
intel_encoder->type = INTEL_OUTPUT_DDI;
intel_encoder->power_domain = intel_port_to_power_domain(port);
intel_encoder->port = port;
intel_encoder->cloneable = 0;
for_each_pipe(dev_priv, pipe)
intel_encoder->crtc_mask |= BIT(pipe);
if (INTEL_GEN(dev_priv) >= 11)
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
DDI_BUF_PORT_REVERSAL;
else
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
(DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
intel_dig_port->max_lanes = intel_ddi_max_lanes(intel_dig_port);
intel_dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port);
switch (port) {
case PORT_A:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_A_IO;
break;
case PORT_B:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_B_IO;
break;
case PORT_C:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_C_IO;
break;
case PORT_D:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_D_IO;
break;
case PORT_E:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_E_IO;
break;
case PORT_F:
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_F_IO;
break;
default:
MISSING_CASE(port);
}
if (init_dp) {
if (!intel_ddi_init_dp_connector(intel_dig_port))
goto err;
intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
}
/* In theory we don't need the encoder->type check, but leave it just in
* case we have some really bad VBTs... */
if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) {
if (!intel_ddi_init_hdmi_connector(intel_dig_port))
goto err;
}
if (init_lspcon) {
if (lspcon_init(intel_dig_port))
/* TODO: handle hdmi info frame part */
DRM_DEBUG_KMS("LSPCON init success on port %c\n",
port_name(port));
else
/*
* LSPCON init faied, but DP init was success, so
* lets try to drive as DP++ port.
*/
DRM_ERROR("LSPCON init failed on port %c\n",
port_name(port));
}
intel_infoframe_init(intel_dig_port);
return;
err:
drm_encoder_cleanup(encoder);
kfree(intel_dig_port);
}