linux_dsm_epyc7002/tools/perf/util/thread.h

146 lines
3.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PERF_THREAD_H
#define __PERF_THREAD_H
#include <linux/refcount.h>
#include <linux/rbtree.h>
#include <linux/list.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include "srccode.h"
#include "symbol_conf.h"
#include <strlist.h>
#include <intlist.h>
#include "rwsem.h"
struct addr_location;
struct map;
struct perf_record_namespaces;
struct thread_stack;
struct unwind_libunwind_ops;
struct thread {
union {
struct rb_node rb_node;
struct list_head node;
};
struct maps *maps;
pid_t pid_; /* Not all tools update this */
pid_t tid;
pid_t ppid;
int cpu;
refcount_t refcnt;
bool comm_set;
perf tools: Elliminate alignment holes perf_evsel: Before: /* size: 320, cachelines: 5, members: 35 */ /* sum members: 304, holes: 3, sum holes: 16 */ After: /* size: 304, cachelines: 5, members: 35 */ /* last cacheline: 48 bytes */ perf_evlist: Before: /* size: 2544, cachelines: 40, members: 17 */ /* sum members: 2533, holes: 2, sum holes: 11 */ /* last cacheline: 48 bytes */ After: /* size: 2536, cachelines: 40, members: 17 */ /* sum members: 2533, holes: 1, sum holes: 3 */ /* last cacheline: 40 bytes */ timechart: Before: /* size: 288, cachelines: 5, members: 21 */ /* sum members: 271, holes: 2, sum holes: 10 */ /* padding: 7 */ /* last cacheline: 32 bytes */ After: /* size: 272, cachelines: 5, members: 21 */ /* sum members: 271, holes: 1, sum holes: 1 */ /* last cacheline: 16 bytes */ thread: Before: /* size: 112, cachelines: 2, members: 15 */ /* sum members: 101, holes: 2, sum holes: 11 */ /* last cacheline: 48 bytes */ After: /* size: 104, cachelines: 2, members: 15 */ /* sum members: 101, holes: 1, sum holes: 3 */ /* last cacheline: 40 bytes */ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a543w7zjl9yyrg9nkf1teukp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-16 03:29:56 +07:00
int comm_len;
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 21:49:27 +07:00
bool dead; /* if set thread has exited */
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 03:41:43 +07:00
struct list_head namespaces_list;
struct rw_semaphore namespaces_lock;
struct list_head comm_list;
struct rw_semaphore comm_lock;
u64 db_id;
perf kvm: Events analysis tool Add 'perf kvm stat' support to analyze kvm vmexit/mmio/ioport smartly Usage: - kvm stat run a command and gather performance counter statistics, it is the alias of perf stat - trace kvm events: perf kvm stat record, or, if other tracepoints are interesting as well, we can append the events like this: perf kvm stat record -e timer:* -a If many guests are running, we can track the specified guest by using -p or --pid, -a is used to track events generated by all guests. - show the result: perf kvm stat report The output example is following: 13005 13059 total 2 guests are running on the host Then, track the guest whose pid is 13059: ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.253 MB perf.data.guest (~11065 samples) ] See the vmexit events: Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Avg time APIC_ACCESS 460 70.55% 0.01% 22.44us ( +- 1.75% ) HLT 93 14.26% 99.98% 832077.26us ( +- 10.42% ) EXTERNAL_INTERRUPT 64 9.82% 0.00% 35.35us ( +- 14.21% ) PENDING_INTERRUPT 24 3.68% 0.00% 9.29us ( +- 31.39% ) CR_ACCESS 7 1.07% 0.00% 8.12us ( +- 5.76% ) IO_INSTRUCTION 3 0.46% 0.00% 18.00us ( +- 11.79% ) EXCEPTION_NMI 1 0.15% 0.00% 5.83us ( +- -nan% ) Total Samples:652, Total events handled time:77396109.80us. See the mmio events: Analyze events for all VCPUs: MMIO Access Samples Samples% Time% Avg time 0xfee00380:W 387 84.31% 79.28% 8.29us ( +- 3.32% ) 0xfee00300:W 24 5.23% 9.96% 16.79us ( +- 1.97% ) 0xfee00300:R 24 5.23% 7.83% 13.20us ( +- 3.00% ) 0xfee00310:W 24 5.23% 2.93% 4.94us ( +- 3.84% ) Total Samples:459, Total events handled time:4044.59us. See the ioport event: Analyze events for all VCPUs: IO Port Access Samples Samples% Time% Avg time 0xc050:POUT 3 100.00% 100.00% 13.75us ( +- 10.83% ) Total Samples:3, Total events handled time:41.26us. And, --vcpu is used to track the specified vcpu and --key is used to sort the result: Analyze events for VCPU 0: VM-EXIT Samples Samples% Time% Avg time HLT 27 13.85% 99.97% 405790.24us ( +- 12.70% ) EXTERNAL_INTERRUPT 13 6.67% 0.00% 27.94us ( +- 22.26% ) APIC_ACCESS 146 74.87% 0.03% 21.69us ( +- 2.91% ) IO_INSTRUCTION 2 1.03% 0.00% 17.77us ( +- 20.56% ) CR_ACCESS 2 1.03% 0.00% 8.55us ( +- 6.47% ) PENDING_INTERRUPT 5 2.56% 0.00% 6.27us ( +- 3.94% ) Total Samples:195, Total events handled time:10959950.90us. Signed-off-by: Dong Hao <haodong@linux.vnet.ibm.com> Signed-off-by: Runzhen Wang <runzhen@linux.vnet.ibm.com> [ Dong Hao <haodong@linux.vnet.ibm.com> Runzhen Wang <runzhen@linux.vnet.ibm.com>: - rebase it on current acme's tree - fix the compiling-error on i386 ] Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347870675-31495-4-git-send-email-haodong@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-17 15:31:15 +07:00
void *priv;
struct thread_stack *ts;
struct nsinfo *nsinfo;
perf tools: Support 'srccode' output When looking at PT or brstackinsn traces with 'perf script' it can be very useful to see the source code. This adds a simple facility to print them with 'perf script', if the information is available through dwarf % perf record ... % perf script -F insn,ip,sym,srccode ... 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004b3 main 6 v++; % perf record -b ... % perf script -F insn,ip,sym,srccode,brstackinsn ... main+22: 0000000000400543 insn: e8 ca ff ff ff # PRED |18 f1(); f1: 0000000000400512 insn: 55 |10 { 0000000000400513 insn: 48 89 e5 0000000000400516 insn: b8 00 00 00 00 |11 f2(); 000000000040051b insn: e8 d6 ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; 0000000000400500 insn: 8b 0d 2a 0b 20 00 0000000000400506 insn: 99 0000000000400507 insn: f7 f9 0000000000400509 insn: 89 05 29 0b 20 00 000000000040050f insn: 90 |7 } 0000000000400510 insn: 5d 0000000000400511 insn: c3 # PRED f1+14: 0000000000400520 insn: b8 00 00 00 00 |12 f2(); 0000000000400525 insn: e8 cc ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; Not supported for callchains currently, would need some layout changes there. Committer notes: Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this warning: In file included from util/srccode.c:19:0: /usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp] #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> ^~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-04 07:18:48 +07:00
struct srccode_state srccode_state;
perf script: Implement --graph-function Add a ftrace style --graph-function argument to 'perf script' that allows to print itrace function calls only below a given function. This makes it easier to find the code of interest in a large trace. % perf record -e intel_pt//k -a sleep 1 % perf script --graph-function group_sched_in --call-trace perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage perf 900 [000] 194167.205652203: ([kernel.kallsyms]) calc_timer_values perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_cpu perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) arch_perf_update_userpage perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __fentry__ perf 900 [000] 194167.205652203: ([kernel.kallsyms]) using_native_sched_clock perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_stable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) group_sched_in swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) event_sched_in.isra.107 swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_set_state.part.71 swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_time swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_pmu_disable swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_log_itrace_start swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_userpage swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) calc_timer_values swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_cpu swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) arch_perf_update_userpage swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __fentry__ swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) using_native_sched_clock swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_stable Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Link: http://lkml.kernel.org/r/20180920180540.14039-5-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-21 01:05:39 +07:00
bool filter;
int filter_entry_depth;
};
struct machine;
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 03:41:43 +07:00
struct namespaces;
struct comm;
struct thread *thread__new(pid_t pid, pid_t tid);
int thread__init_maps(struct thread *thread, struct machine *machine);
void thread__delete(struct thread *thread);
struct thread *thread__get(struct thread *thread);
void thread__put(struct thread *thread);
static inline void __thread__zput(struct thread **thread)
{
thread__put(*thread);
*thread = NULL;
}
#define thread__zput(thread) __thread__zput(&thread)
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 21:49:27 +07:00
static inline void thread__exited(struct thread *thread)
{
thread->dead = true;
}
struct namespaces *thread__namespaces(struct thread *thread);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 03:41:43 +07:00
int thread__set_namespaces(struct thread *thread, u64 timestamp,
struct perf_record_namespaces *event);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 03:41:43 +07:00
int __thread__set_comm(struct thread *thread, const char *comm, u64 timestamp,
bool exec);
static inline int thread__set_comm(struct thread *thread, const char *comm,
u64 timestamp)
{
return __thread__set_comm(thread, comm, timestamp, false);
}
int thread__set_comm_from_proc(struct thread *thread);
int thread__comm_len(struct thread *thread);
struct comm *thread__comm(const struct thread *thread);
struct comm *thread__exec_comm(const struct thread *thread);
const char *thread__comm_str(struct thread *thread);
int thread__insert_map(struct thread *thread, struct map *map);
int thread__fork(struct thread *thread, struct thread *parent, u64 timestamp, bool do_maps_clone);
size_t thread__fprintf(struct thread *thread, FILE *fp);
struct thread *thread__main_thread(struct machine *machine, struct thread *thread);
struct map *thread__find_map(struct thread *thread, u8 cpumode, u64 addr,
struct addr_location *al);
struct map *thread__find_map_fb(struct thread *thread, u8 cpumode, u64 addr,
struct addr_location *al);
struct symbol *thread__find_symbol(struct thread *thread, u8 cpumode,
u64 addr, struct addr_location *al);
struct symbol *thread__find_symbol_fb(struct thread *thread, u8 cpumode,
u64 addr, struct addr_location *al);
void thread__find_cpumode_addr_location(struct thread *thread, u64 addr,
struct addr_location *al);
int thread__memcpy(struct thread *thread, struct machine *machine,
void *buf, u64 ip, int len, bool *is64bit);
static inline void *thread__priv(struct thread *thread)
{
return thread->priv;
}
static inline void thread__set_priv(struct thread *thread, void *p)
{
thread->priv = p;
}
static inline bool thread__is_filtered(struct thread *thread)
{
if (symbol_conf.comm_list &&
!strlist__has_entry(symbol_conf.comm_list, thread__comm_str(thread))) {
return true;
}
if (symbol_conf.pid_list &&
!intlist__has_entry(symbol_conf.pid_list, thread->pid_)) {
return true;
}
if (symbol_conf.tid_list &&
!intlist__has_entry(symbol_conf.tid_list, thread->tid)) {
return true;
}
return false;
}
#endif /* __PERF_THREAD_H */