linux_dsm_epyc7002/arch/arm64/mm/mmu.c

1067 lines
27 KiB
C
Raw Normal View History

/*
* Based on arch/arm/mm/mmu.c
*
* Copyright (C) 1995-2005 Russell King
* Copyright (C) 2012 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/cache.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kexec.h>
#include <linux/libfdt.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <asm/barrier.h>
#include <asm/cputype.h>
#include <asm/fixmap.h>
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
#include <asm/kasan.h>
#include <asm/kernel-pgtable.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
arm64: mm: Implement 4 levels of translation tables This patch implements 4 levels of translation tables since 3 levels of page tables with 4KB pages cannot support 40-bit physical address space described in [1] due to the following issue. It is a restriction that kernel logical memory map with 4KB + 3 levels (0xffffffc000000000-0xffffffffffffffff) cannot cover RAM region from 544GB to 1024GB in [1]. Specifically, ARM64 kernel fails to create mapping for this region in map_mem function since __phys_to_virt for this region reaches to address overflow. If SoC design follows the document, [1], over 32GB RAM would be placed from 544GB. Even 64GB system is supposed to use the region from 544GB to 576GB for only 32GB RAM. Naturally, it would reach to enable 4 levels of page tables to avoid hacking __virt_to_phys and __phys_to_virt. However, it is recommended 4 levels of page table should be only enabled if memory map is too sparse or there is about 512GB RAM. References ---------- [1]: Principles of ARM Memory Maps, White Paper, Issue C Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Steve Capper <steve.capper@linaro.org> [catalin.marinas@arm.com: MEMBLOCK_INITIAL_LIMIT removed, same as PUD_SIZE] [catalin.marinas@arm.com: early_ioremap_init() updated for 4 levels] [catalin.marinas@arm.com: 48-bit VA depends on BROKEN until KVM is fixed] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Jungseok Lee <jungseoklee85@gmail.com>
2014-05-12 16:40:51 +07:00
#include <asm/memblock.h>
#include <asm/mmu_context.h>
#include <asm/ptdump.h>
#include <asm/tlbflush.h>
#define NO_BLOCK_MAPPINGS BIT(0)
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
#define NO_CONT_MAPPINGS BIT(1)
u64 idmap_t0sz = TCR_T0SZ(VA_BITS);
u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
u64 vabits_user __ro_after_init;
EXPORT_SYMBOL(vabits_user);
u64 kimage_voffset __ro_after_init;
EXPORT_SYMBOL(kimage_voffset);
/*
* Empty_zero_page is a special page that is used for zero-initialized data
* and COW.
*/
arm64: mm: place empty_zero_page in bss Currently the zero page is set up in paging_init, and thus we cannot use the zero page earlier. We use the zero page as a reserved TTBR value from which no TLB entries may be allocated (e.g. when uninstalling the idmap). To enable such usage earlier (as may be required for invasive changes to the kernel page tables), and to minimise the time that the idmap is active, we need to be able to use the zero page before paging_init. This patch follows the example set by x86, by allocating the zero page at compile time, in .bss. This means that the zero page itself is available immediately upon entry to start_kernel (as we zero .bss before this), and also means that the zero page takes up no space in the raw Image binary. The associated struct page is allocated in bootmem_init, and remains unavailable until this time. Outside of arch code, the only users of empty_zero_page assume that the empty_zero_page symbol refers to the zeroed memory itself, and that ZERO_PAGE(x) must be used to acquire the associated struct page, following the example of x86. This patch also brings arm64 inline with these assumptions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:44:57 +07:00
unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
EXPORT_SYMBOL(empty_zero_page);
static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
static DEFINE_SPINLOCK(swapper_pgdir_lock);
void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
{
pgd_t *fixmap_pgdp;
spin_lock(&swapper_pgdir_lock);
fixmap_pgdp = pgd_set_fixmap(__pa_symbol(pgdp));
WRITE_ONCE(*fixmap_pgdp, pgd);
/*
* We need dsb(ishst) here to ensure the page-table-walker sees
* our new entry before set_p?d() returns. The fixmap's
* flush_tlb_kernel_range() via clear_fixmap() does this for us.
*/
pgd_clear_fixmap();
spin_unlock(&swapper_pgdir_lock);
}
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (!pfn_valid(pfn))
return pgprot_noncached(vma_prot);
else if (file->f_flags & O_SYNC)
return pgprot_writecombine(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
static phys_addr_t __init early_pgtable_alloc(void)
{
phys_addr_t phys;
void *ptr;
memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc* Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 05:07:59 +07:00
phys = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
/*
* The FIX_{PGD,PUD,PMD} slots may be in active use, but the FIX_PTE
* slot will be free, so we can (ab)use the FIX_PTE slot to initialise
* any level of table.
*/
ptr = pte_set_fixmap(phys);
memset(ptr, 0, PAGE_SIZE);
/*
* Implicit barriers also ensure the zeroed page is visible to the page
* table walker
*/
pte_clear_fixmap();
return phys;
}
static bool pgattr_change_is_safe(u64 old, u64 new)
{
/*
* The following mapping attributes may be updated in live
* kernel mappings without the need for break-before-make.
*/
static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG;
/* creating or taking down mappings is always safe */
if (old == 0 || new == 0)
return true;
/* live contiguous mappings may not be manipulated at all */
if ((old | new) & PTE_CONT)
return false;
/* Transitioning from Non-Global to Global is unsafe */
if (old & ~new & PTE_NG)
return false;
return ((old ^ new) & ~mask) == 0;
}
static void init_pte(pmd_t *pmdp, unsigned long addr, unsigned long end,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys_addr_t phys, pgprot_t prot)
{
pte_t *ptep;
ptep = pte_set_fixmap_offset(pmdp, addr);
do {
pte_t old_pte = READ_ONCE(*ptep);
set_pte(ptep, pfn_pte(__phys_to_pfn(phys), prot));
/*
* After the PTE entry has been populated once, we
* only allow updates to the permission attributes.
*/
BUG_ON(!pgattr_change_is_safe(pte_val(old_pte),
READ_ONCE(pte_val(*ptep))));
phys += PAGE_SIZE;
} while (ptep++, addr += PAGE_SIZE, addr != end);
pte_clear_fixmap();
}
static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
unsigned long end, phys_addr_t phys,
pgprot_t prot,
phys_addr_t (*pgtable_alloc)(void),
int flags)
{
unsigned long next;
pmd_t pmd = READ_ONCE(*pmdp);
BUG_ON(pmd_sect(pmd));
if (pmd_none(pmd)) {
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys_addr_t pte_phys;
BUG_ON(!pgtable_alloc);
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
pte_phys = pgtable_alloc();
__pmd_populate(pmdp, pte_phys, PMD_TYPE_TABLE);
pmd = READ_ONCE(*pmdp);
}
BUG_ON(pmd_bad(pmd));
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
do {
pgprot_t __prot = prot;
next = pte_cont_addr_end(addr, end);
/* use a contiguous mapping if the range is suitably aligned */
if ((((addr | next | phys) & ~CONT_PTE_MASK) == 0) &&
(flags & NO_CONT_MAPPINGS) == 0)
__prot = __pgprot(pgprot_val(prot) | PTE_CONT);
init_pte(pmdp, addr, next, phys, __prot);
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys += next - addr;
} while (addr = next, addr != end);
}
static void init_pmd(pud_t *pudp, unsigned long addr, unsigned long end,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys_addr_t phys, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(void), int flags)
{
unsigned long next;
pmd_t *pmdp;
pmdp = pmd_set_fixmap_offset(pudp, addr);
do {
pmd_t old_pmd = READ_ONCE(*pmdp);
next = pmd_addr_end(addr, end);
/* try section mapping first */
if (((addr | next | phys) & ~SECTION_MASK) == 0 &&
(flags & NO_BLOCK_MAPPINGS) == 0) {
pmd_set_huge(pmdp, phys, prot);
/*
* After the PMD entry has been populated once, we
* only allow updates to the permission attributes.
*/
BUG_ON(!pgattr_change_is_safe(pmd_val(old_pmd),
READ_ONCE(pmd_val(*pmdp))));
} else {
alloc_init_cont_pte(pmdp, addr, next, phys, prot,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
pgtable_alloc, flags);
BUG_ON(pmd_val(old_pmd) != 0 &&
pmd_val(old_pmd) != READ_ONCE(pmd_val(*pmdp)));
}
phys += next - addr;
} while (pmdp++, addr = next, addr != end);
pmd_clear_fixmap();
}
static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
unsigned long end, phys_addr_t phys,
pgprot_t prot,
phys_addr_t (*pgtable_alloc)(void), int flags)
{
unsigned long next;
pud_t pud = READ_ONCE(*pudp);
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
/*
* Check for initial section mappings in the pgd/pud.
*/
BUG_ON(pud_sect(pud));
if (pud_none(pud)) {
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys_addr_t pmd_phys;
BUG_ON(!pgtable_alloc);
pmd_phys = pgtable_alloc();
__pud_populate(pudp, pmd_phys, PUD_TYPE_TABLE);
pud = READ_ONCE(*pudp);
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
}
BUG_ON(pud_bad(pud));
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
do {
pgprot_t __prot = prot;
next = pmd_cont_addr_end(addr, end);
/* use a contiguous mapping if the range is suitably aligned */
if ((((addr | next | phys) & ~CONT_PMD_MASK) == 0) &&
(flags & NO_CONT_MAPPINGS) == 0)
__prot = __pgprot(pgprot_val(prot) | PTE_CONT);
init_pmd(pudp, addr, next, phys, __prot, pgtable_alloc, flags);
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
phys += next - addr;
} while (addr = next, addr != end);
}
static inline bool use_1G_block(unsigned long addr, unsigned long next,
unsigned long phys)
{
if (PAGE_SHIFT != 12)
return false;
if (((addr | next | phys) & ~PUD_MASK) != 0)
return false;
return true;
}
static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(void),
int flags)
{
unsigned long next;
pud_t *pudp;
pgd_t pgd = READ_ONCE(*pgdp);
if (pgd_none(pgd)) {
phys_addr_t pud_phys;
BUG_ON(!pgtable_alloc);
pud_phys = pgtable_alloc();
__pgd_populate(pgdp, pud_phys, PUD_TYPE_TABLE);
pgd = READ_ONCE(*pgdp);
arm64: mm: Implement 4 levels of translation tables This patch implements 4 levels of translation tables since 3 levels of page tables with 4KB pages cannot support 40-bit physical address space described in [1] due to the following issue. It is a restriction that kernel logical memory map with 4KB + 3 levels (0xffffffc000000000-0xffffffffffffffff) cannot cover RAM region from 544GB to 1024GB in [1]. Specifically, ARM64 kernel fails to create mapping for this region in map_mem function since __phys_to_virt for this region reaches to address overflow. If SoC design follows the document, [1], over 32GB RAM would be placed from 544GB. Even 64GB system is supposed to use the region from 544GB to 576GB for only 32GB RAM. Naturally, it would reach to enable 4 levels of page tables to avoid hacking __virt_to_phys and __phys_to_virt. However, it is recommended 4 levels of page table should be only enabled if memory map is too sparse or there is about 512GB RAM. References ---------- [1]: Principles of ARM Memory Maps, White Paper, Issue C Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Steve Capper <steve.capper@linaro.org> [catalin.marinas@arm.com: MEMBLOCK_INITIAL_LIMIT removed, same as PUD_SIZE] [catalin.marinas@arm.com: early_ioremap_init() updated for 4 levels] [catalin.marinas@arm.com: 48-bit VA depends on BROKEN until KVM is fixed] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Jungseok Lee <jungseoklee85@gmail.com>
2014-05-12 16:40:51 +07:00
}
BUG_ON(pgd_bad(pgd));
arm64: mm: Implement 4 levels of translation tables This patch implements 4 levels of translation tables since 3 levels of page tables with 4KB pages cannot support 40-bit physical address space described in [1] due to the following issue. It is a restriction that kernel logical memory map with 4KB + 3 levels (0xffffffc000000000-0xffffffffffffffff) cannot cover RAM region from 544GB to 1024GB in [1]. Specifically, ARM64 kernel fails to create mapping for this region in map_mem function since __phys_to_virt for this region reaches to address overflow. If SoC design follows the document, [1], over 32GB RAM would be placed from 544GB. Even 64GB system is supposed to use the region from 544GB to 576GB for only 32GB RAM. Naturally, it would reach to enable 4 levels of page tables to avoid hacking __virt_to_phys and __phys_to_virt. However, it is recommended 4 levels of page table should be only enabled if memory map is too sparse or there is about 512GB RAM. References ---------- [1]: Principles of ARM Memory Maps, White Paper, Issue C Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Steve Capper <steve.capper@linaro.org> [catalin.marinas@arm.com: MEMBLOCK_INITIAL_LIMIT removed, same as PUD_SIZE] [catalin.marinas@arm.com: early_ioremap_init() updated for 4 levels] [catalin.marinas@arm.com: 48-bit VA depends on BROKEN until KVM is fixed] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Jungseok Lee <jungseoklee85@gmail.com>
2014-05-12 16:40:51 +07:00
pudp = pud_set_fixmap_offset(pgdp, addr);
do {
pud_t old_pud = READ_ONCE(*pudp);
next = pud_addr_end(addr, end);
/*
* For 4K granule only, attempt to put down a 1GB block
*/
if (use_1G_block(addr, next, phys) &&
(flags & NO_BLOCK_MAPPINGS) == 0) {
pud_set_huge(pudp, phys, prot);
/*
* After the PUD entry has been populated once, we
* only allow updates to the permission attributes.
*/
BUG_ON(!pgattr_change_is_safe(pud_val(old_pud),
READ_ONCE(pud_val(*pudp))));
} else {
alloc_init_cont_pmd(pudp, addr, next, phys, prot,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
pgtable_alloc, flags);
BUG_ON(pud_val(old_pud) != 0 &&
pud_val(old_pud) != READ_ONCE(pud_val(*pudp)));
}
phys += next - addr;
} while (pudp++, addr = next, addr != end);
pud_clear_fixmap();
}
static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
unsigned long virt, phys_addr_t size,
pgprot_t prot,
phys_addr_t (*pgtable_alloc)(void),
int flags)
{
unsigned long addr, length, end, next;
pgd_t *pgdp = pgd_offset_raw(pgdir, virt);
/*
* If the virtual and physical address don't have the same offset
* within a page, we cannot map the region as the caller expects.
*/
if (WARN_ON((phys ^ virt) & ~PAGE_MASK))
return;
phys &= PAGE_MASK;
addr = virt & PAGE_MASK;
length = PAGE_ALIGN(size + (virt & ~PAGE_MASK));
end = addr + length;
do {
next = pgd_addr_end(addr, end);
alloc_init_pud(pgdp, addr, next, phys, prot, pgtable_alloc,
flags);
phys += next - addr;
} while (pgdp++, addr = next, addr != end);
}
static phys_addr_t pgd_pgtable_alloc(void)
{
void *ptr = (void *)__get_free_page(PGALLOC_GFP);
if (!ptr || !pgtable_page_ctor(virt_to_page(ptr)))
BUG();
/* Ensure the zeroed page is visible to the page table walker */
dsb(ishst);
return __pa(ptr);
}
/*
* This function can only be used to modify existing table entries,
* without allocating new levels of table. Note that this permits the
* creation of new section or page entries.
*/
static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
phys_addr_t size, pgprot_t prot)
{
if (virt < VMALLOC_START) {
pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n",
&phys, virt);
return;
}
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
NO_CONT_MAPPINGS);
}
void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
unsigned long virt, phys_addr_t size,
pgprot_t prot, bool page_mappings_only)
{
int flags = 0;
BUG_ON(mm == &init_mm);
if (page_mappings_only)
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
pgd_pgtable_alloc, flags);
}
static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
phys_addr_t size, pgprot_t prot)
{
if (virt < VMALLOC_START) {
pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n",
&phys, virt);
return;
}
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
NO_CONT_MAPPINGS);
/* flush the TLBs after updating live kernel mappings */
flush_tlb_kernel_range(virt, virt + size);
}
static void __init __map_memblock(pgd_t *pgdp, phys_addr_t start,
phys_addr_t end, pgprot_t prot, int flags)
{
__create_pgd_mapping(pgdp, start, __phys_to_virt(start), end - start,
prot, early_pgtable_alloc, flags);
}
void __init mark_linear_text_alias_ro(void)
{
/*
* Remove the write permissions from the linear alias of .text/.rodata
*/
update_mapping_prot(__pa_symbol(_text), (unsigned long)lm_alias(_text),
(unsigned long)__init_begin - (unsigned long)_text,
PAGE_KERNEL_RO);
}
static void __init map_mem(pgd_t *pgdp)
{
phys_addr_t kernel_start = __pa_symbol(_text);
phys_addr_t kernel_end = __pa_symbol(__init_begin);
struct memblock_region *reg;
int flags = 0;
if (rodata_full || debug_pagealloc_enabled())
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
/*
* Take care not to create a writable alias for the
* read-only text and rodata sections of the kernel image.
* So temporarily mark them as NOMAP to skip mappings in
* the following for-loop
*/
memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
#ifdef CONFIG_KEXEC_CORE
if (crashk_res.end)
memblock_mark_nomap(crashk_res.start,
resource_size(&crashk_res));
#endif
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
/* map all the memory banks */
for_each_memblock(memory, reg) {
phys_addr_t start = reg->base;
phys_addr_t end = start + reg->size;
if (start >= end)
break;
if (memblock_is_nomap(reg))
continue;
__map_memblock(pgdp, start, end, PAGE_KERNEL, flags);
}
/*
* Map the linear alias of the [_text, __init_begin) interval
* as non-executable now, and remove the write permission in
* mark_linear_text_alias_ro() below (which will be called after
* alternative patching has completed). This makes the contents
* of the region accessible to subsystems such as hibernate,
* but protects it from inadvertent modification or execution.
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
* Note that contiguous mappings cannot be remapped in this way,
* so we should avoid them here.
*/
__map_memblock(pgdp, kernel_start, kernel_end,
PAGE_KERNEL, NO_CONT_MAPPINGS);
memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
#ifdef CONFIG_KEXEC_CORE
/*
* Use page-level mappings here so that we can shrink the region
* in page granularity and put back unused memory to buddy system
* through /sys/kernel/kexec_crash_size interface.
*/
if (crashk_res.end) {
__map_memblock(pgdp, crashk_res.start, crashk_res.end + 1,
PAGE_KERNEL,
NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
memblock_clear_nomap(crashk_res.start,
resource_size(&crashk_res));
}
#endif
}
void mark_rodata_ro(void)
{
unsigned long section_size;
/*
* mark .rodata as read only. Use __init_begin rather than __end_rodata
* to cover NOTES and EXCEPTION_TABLE.
*/
section_size = (unsigned long)__init_begin - (unsigned long)__start_rodata;
update_mapping_prot(__pa_symbol(__start_rodata), (unsigned long)__start_rodata,
section_size, PAGE_KERNEL_RO);
debug_checkwx();
}
static void __init map_kernel_segment(pgd_t *pgdp, void *va_start, void *va_end,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
pgprot_t prot, struct vm_struct *vma,
int flags, unsigned long vm_flags)
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
{
phys_addr_t pa_start = __pa_symbol(va_start);
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
unsigned long size = va_end - va_start;
BUG_ON(!PAGE_ALIGNED(pa_start));
BUG_ON(!PAGE_ALIGNED(size));
__create_pgd_mapping(pgdp, pa_start, (unsigned long)va_start, size, prot,
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
early_pgtable_alloc, flags);
if (!(vm_flags & VM_NO_GUARD))
size += PAGE_SIZE;
vma->addr = va_start;
vma->phys_addr = pa_start;
vma->size = size;
vma->flags = VM_MAP | vm_flags;
vma->caller = __builtin_return_address(0);
vm_area_add_early(vma);
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
}
static int __init parse_rodata(char *arg)
{
int ret = strtobool(arg, &rodata_enabled);
if (!ret) {
rodata_full = false;
return 0;
}
/* permit 'full' in addition to boolean options */
if (strcmp(arg, "full"))
return -EINVAL;
rodata_enabled = true;
rodata_full = true;
return 0;
}
early_param("rodata", parse_rodata);
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
static int __init map_entry_trampoline(void)
{
pgprot_t prot = rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
/* The trampoline is always mapped and can therefore be global */
pgprot_val(prot) &= ~PTE_NG;
/* Map only the text into the trampoline page table */
memset(tramp_pg_dir, 0, PGD_SIZE);
__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS, PAGE_SIZE,
prot, pgd_pgtable_alloc, 0);
/* Map both the text and data into the kernel page table */
__set_fixmap(FIX_ENTRY_TRAMP_TEXT, pa_start, prot);
if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
extern char __entry_tramp_data_start[];
__set_fixmap(FIX_ENTRY_TRAMP_DATA,
__pa_symbol(__entry_tramp_data_start),
PAGE_KERNEL_RO);
}
return 0;
}
core_initcall(map_entry_trampoline);
#endif
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
/*
* Create fine-grained mappings for the kernel.
*/
static void __init map_kernel(pgd_t *pgdp)
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
{
static struct vm_struct vmlinux_text, vmlinux_rodata, vmlinux_inittext,
vmlinux_initdata, vmlinux_data;
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
/*
* External debuggers may need to write directly to the text
* mapping to install SW breakpoints. Allow this (only) when
* explicitly requested with rodata=off.
*/
pgprot_t text_prot = rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
arm64: mm: set the contiguous bit for kernel mappings where appropriate This is the third attempt at enabling the use of contiguous hints for kernel mappings. The most recent attempt 0bfc445dec9d was reverted after it turned out that updating permission attributes on live contiguous ranges may result in TLB conflicts. So this time, the contiguous hint is not set for .rodata or for the linear alias of .text/.rodata, both of which are mapped read-write initially, and remapped read-only at a later stage. (Note that the latter region could also be unmapped and remapped again with updated permission attributes, given that the region, while live, is only mapped for the convenience of the hibernation code, but that also means the TLB footprint is negligible anyway, so why bother) This enables the following contiguous range sizes for the virtual mapping of the kernel image, and for the linear mapping: granule size | cont PTE | cont PMD | -------------+------------+------------+ 4 KB | 64 KB | 32 MB | 16 KB | 2 MB | 1 GB* | 64 KB | 2 MB | 16 GB* | * Only when built for 3 or more levels of translation. This is due to the fact that a 2 level configuration only consists of PGDs and PTEs, and the added complexity of dealing with folded PMDs is not justified considering that 16 GB contiguous ranges are likely to be ignored by the hardware (and 16k/2 levels is a niche configuration) Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-10 03:52:09 +07:00
/*
* Only rodata will be remapped with different permissions later on,
* all other segments are allowed to use contiguous mappings.
*/
map_kernel_segment(pgdp, _text, _etext, text_prot, &vmlinux_text, 0,
VM_NO_GUARD);
map_kernel_segment(pgdp, __start_rodata, __inittext_begin, PAGE_KERNEL,
&vmlinux_rodata, NO_CONT_MAPPINGS, VM_NO_GUARD);
map_kernel_segment(pgdp, __inittext_begin, __inittext_end, text_prot,
&vmlinux_inittext, 0, VM_NO_GUARD);
map_kernel_segment(pgdp, __initdata_begin, __initdata_end, PAGE_KERNEL,
&vmlinux_initdata, 0, VM_NO_GUARD);
map_kernel_segment(pgdp, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
if (!READ_ONCE(pgd_val(*pgd_offset_raw(pgdp, FIXADDR_START)))) {
/*
* The fixmap falls in a separate pgd to the kernel, and doesn't
* live in the carveout for the swapper_pg_dir. We can simply
* re-use the existing dir for the fixmap.
*/
set_pgd(pgd_offset_raw(pgdp, FIXADDR_START),
READ_ONCE(*pgd_offset_k(FIXADDR_START)));
} else if (CONFIG_PGTABLE_LEVELS > 3) {
/*
* The fixmap shares its top level pgd entry with the kernel
* mapping. This can really only occur when we are running
* with 16k/4 levels, so we can simply reuse the pud level
* entry instead.
*/
BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
pud_populate(&init_mm,
pud_set_fixmap_offset(pgdp, FIXADDR_START),
lm_alias(bm_pmd));
pud_clear_fixmap();
} else {
BUG();
}
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
kasan_copy_shadow(pgdp);
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
}
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps and sets up the zero page.
*/
void __init paging_init(void)
{
pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir));
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
map_kernel(pgdp);
map_mem(pgdp);
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
pgd_clear_fixmap();
cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
arm64/mm: Separate boot-time page tables from swapper_pg_dir Since the address of swapper_pg_dir is fixed for a given kernel image, it is an attractive target for manipulation via an arbitrary write. To mitigate this we'd like to make it read-only by moving it into the rodata section. We require that swapper_pg_dir is at a fixed offset from tramp_pg_dir and reserved_ttbr0, so these will also need to move into rodata. However, swapper_pg_dir is allocated along with some transient page tables used for boot which we do not want to move into rodata. As a step towards this, this patch separates the boot-time page tables into a new init_pg_dir, and reduces swapper_pg_dir to the single page it needs to be. This allows us to retain the relationship between swapper_pg_dir, tramp_pg_dir, and swapper_pg_dir, while cleanly separating these from the boot-time page tables. The init_pg_dir holds all of the pgd/pud/pmd/pte levels needed during boot, and all of these levels will be freed when we switch to the swapper_pg_dir, which is initialized by the existing code in paging_init(). Since we start off on the init_pg_dir, we no longer need to allocate a transient page table in paging_init() in order to ensure that swapper_pg_dir isn't live while we initialize it. There should be no functional change as a result of this patch. Signed-off-by: Jun Yao <yaojun8558363@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> [Mark: place init_pg_dir after BSS, fold mm changes, commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-24 21:47:49 +07:00
init_mm.pgd = swapper_pg_dir;
arm64: mm: create new fine-grained mappings at boot At boot we may change the granularity of the tables mapping the kernel (by splitting or making sections). This may happen when we create the linear mapping (in __map_memblock), or at any point we try to apply fine-grained permissions to the kernel (e.g. fixup_executable, mark_rodata_ro, fixup_init). Changing the active page tables in this manner may result in multiple entries for the same address being allocated into TLBs, risking problems such as TLB conflict aborts or issues derived from the amalgamation of TLB entries. Generally, a break-before-make (BBM) approach is necessary to avoid conflicts, but we cannot do this for the kernel tables as it risks unmapping text or data being used to do so. Instead, we can create a new set of tables from scratch in the safety of the existing mappings, and subsequently migrate over to these using the new cpu_replace_ttbr1 helper, which avoids the two sets of tables being active simultaneously. To avoid issues when we later modify permissions of the page tables (e.g. in fixup_init), we must create the page tables at a granularity such that later modification does not result in splitting of tables. This patch applies this strategy, creating a new set of fine-grained page tables from scratch, and safely migrating to them. The existing fixmap and kasan shadow page tables are reused in the new fine-grained tables. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-25 18:45:12 +07:00
arm64/mm: Separate boot-time page tables from swapper_pg_dir Since the address of swapper_pg_dir is fixed for a given kernel image, it is an attractive target for manipulation via an arbitrary write. To mitigate this we'd like to make it read-only by moving it into the rodata section. We require that swapper_pg_dir is at a fixed offset from tramp_pg_dir and reserved_ttbr0, so these will also need to move into rodata. However, swapper_pg_dir is allocated along with some transient page tables used for boot which we do not want to move into rodata. As a step towards this, this patch separates the boot-time page tables into a new init_pg_dir, and reduces swapper_pg_dir to the single page it needs to be. This allows us to retain the relationship between swapper_pg_dir, tramp_pg_dir, and swapper_pg_dir, while cleanly separating these from the boot-time page tables. The init_pg_dir holds all of the pgd/pud/pmd/pte levels needed during boot, and all of these levels will be freed when we switch to the swapper_pg_dir, which is initialized by the existing code in paging_init(). Since we start off on the init_pg_dir, we no longer need to allocate a transient page table in paging_init() in order to ensure that swapper_pg_dir isn't live while we initialize it. There should be no functional change as a result of this patch. Signed-off-by: Jun Yao <yaojun8558363@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> [Mark: place init_pg_dir after BSS, fold mm changes, commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-24 21:47:49 +07:00
memblock_free(__pa_symbol(init_pg_dir),
__pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir));
memblock_allow_resize();
}
/*
* Check whether a kernel address is valid (derived from arch/x86/).
*/
int kern_addr_valid(unsigned long addr)
{
pgd_t *pgdp;
pud_t *pudp, pud;
pmd_t *pmdp, pmd;
pte_t *ptep, pte;
if ((((long)addr) >> VA_BITS) != -1UL)
return 0;
pgdp = pgd_offset_k(addr);
if (pgd_none(READ_ONCE(*pgdp)))
return 0;
pudp = pud_offset(pgdp, addr);
pud = READ_ONCE(*pudp);
if (pud_none(pud))
return 0;
if (pud_sect(pud))
return pfn_valid(pud_pfn(pud));
pmdp = pmd_offset(pudp, addr);
pmd = READ_ONCE(*pmdp);
if (pmd_none(pmd))
return 0;
if (pmd_sect(pmd))
return pfn_valid(pmd_pfn(pmd));
ptep = pte_offset_kernel(pmdp, addr);
pte = READ_ONCE(*ptep);
if (pte_none(pte))
return 0;
return pfn_valid(pte_pfn(pte));
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
#if !ARM64_SWAPPER_USES_SECTION_MAPS
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
sparse-vmemmap: specify vmemmap population range in bytes The sparse code, when asking the architecture to populate the vmemmap, specifies the section range as a starting page and a number of pages. This is an awkward interface, because none of the arch-specific code actually thinks of the range in terms of 'struct page' units and always translates it to bytes first. In addition, later patches mix huge page and regular page backing for the vmemmap. For this, they need to call vmemmap_populate_basepages() on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these are not necessarily multiples of the 'struct page' size and so this unit is too coarse. Just translate the section range into bytes once in the generic sparse code, then pass byte ranges down the stack. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:07:50 +07:00
return vmemmap_populate_basepages(start, end, node);
}
#else /* !ARM64_SWAPPER_USES_SECTION_MAPS */
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
sparse-vmemmap: specify vmemmap population range in bytes The sparse code, when asking the architecture to populate the vmemmap, specifies the section range as a starting page and a number of pages. This is an awkward interface, because none of the arch-specific code actually thinks of the range in terms of 'struct page' units and always translates it to bytes first. In addition, later patches mix huge page and regular page backing for the vmemmap. For this, they need to call vmemmap_populate_basepages() on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these are not necessarily multiples of the 'struct page' size and so this unit is too coarse. Just translate the section range into bytes once in the generic sparse code, then pass byte ranges down the stack. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:07:50 +07:00
unsigned long addr = start;
unsigned long next;
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
do {
next = pmd_addr_end(addr, end);
pgdp = vmemmap_pgd_populate(addr, node);
if (!pgdp)
return -ENOMEM;
pudp = vmemmap_pud_populate(pgdp, addr, node);
if (!pudp)
return -ENOMEM;
pmdp = pmd_offset(pudp, addr);
if (pmd_none(READ_ONCE(*pmdp))) {
void *p = NULL;
p = vmemmap_alloc_block_buf(PMD_SIZE, node);
if (!p)
return -ENOMEM;
pmd_set_huge(pmdp, __pa(p), __pgprot(PROT_SECT_NORMAL));
} else
vmemmap_verify((pte_t *)pmdp, node, addr, next);
} while (addr = next, addr != end);
return 0;
}
#endif /* CONFIG_ARM64_64K_PAGES */
void vmemmap_free(unsigned long start, unsigned long end,
struct vmem_altmap *altmap)
{
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
static inline pud_t * fixmap_pud(unsigned long addr)
{
pgd_t *pgdp = pgd_offset_k(addr);
pgd_t pgd = READ_ONCE(*pgdp);
BUG_ON(pgd_none(pgd) || pgd_bad(pgd));
return pud_offset_kimg(pgdp, addr);
}
static inline pmd_t * fixmap_pmd(unsigned long addr)
{
pud_t *pudp = fixmap_pud(addr);
pud_t pud = READ_ONCE(*pudp);
BUG_ON(pud_none(pud) || pud_bad(pud));
return pmd_offset_kimg(pudp, addr);
}
static inline pte_t * fixmap_pte(unsigned long addr)
{
return &bm_pte[pte_index(addr)];
}
/*
* The p*d_populate functions call virt_to_phys implicitly so they can't be used
* directly on kernel symbols (bm_p*d). This function is called too early to use
* lm_alias so __p*d_populate functions must be used to populate with the
* physical address from __pa_symbol.
*/
void __init early_fixmap_init(void)
{
pgd_t *pgdp, pgd;
pud_t *pudp;
pmd_t *pmdp;
unsigned long addr = FIXADDR_START;
pgdp = pgd_offset_k(addr);
pgd = READ_ONCE(*pgdp);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
if (CONFIG_PGTABLE_LEVELS > 3 &&
!(pgd_none(pgd) || pgd_page_paddr(pgd) == __pa_symbol(bm_pud))) {
/*
* We only end up here if the kernel mapping and the fixmap
* share the top level pgd entry, which should only happen on
* 16k/4 levels configurations.
*/
BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
pudp = pud_offset_kimg(pgdp, addr);
} else {
if (pgd_none(pgd))
__pgd_populate(pgdp, __pa_symbol(bm_pud), PUD_TYPE_TABLE);
pudp = fixmap_pud(addr);
}
if (pud_none(READ_ONCE(*pudp)))
__pud_populate(pudp, __pa_symbol(bm_pmd), PMD_TYPE_TABLE);
pmdp = fixmap_pmd(addr);
__pmd_populate(pmdp, __pa_symbol(bm_pte), PMD_TYPE_TABLE);
/*
* The boot-ioremap range spans multiple pmds, for which
* we are not prepared:
*/
BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
!= (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
if ((pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)))
|| pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_END))) {
WARN_ON(1);
pr_warn("pmdp %p != %p, %p\n",
pmdp, fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)),
fixmap_pmd(fix_to_virt(FIX_BTMAP_END)));
pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
fix_to_virt(FIX_BTMAP_BEGIN));
pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n",
fix_to_virt(FIX_BTMAP_END));
pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END);
pr_warn("FIX_BTMAP_BEGIN: %d\n", FIX_BTMAP_BEGIN);
}
}
/*
* Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we
* ever need to use IPIs for TLB broadcasting, then we're in trouble here.
*/
void __set_fixmap(enum fixed_addresses idx,
phys_addr_t phys, pgprot_t flags)
{
unsigned long addr = __fix_to_virt(idx);
pte_t *ptep;
BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
ptep = fixmap_pte(addr);
if (pgprot_val(flags)) {
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags));
} else {
pte_clear(&init_mm, addr, ptep);
flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
}
}
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
{
const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
int offset;
void *dt_virt;
/*
* Check whether the physical FDT address is set and meets the minimum
* alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
* at least 8 bytes so that we can always access the magic and size
* fields of the FDT header after mapping the first chunk, double check
* here if that is indeed the case.
*/
BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
return NULL;
/*
* Make sure that the FDT region can be mapped without the need to
* allocate additional translation table pages, so that it is safe
* to call create_mapping_noalloc() this early.
*
* On 64k pages, the FDT will be mapped using PTEs, so we need to
* be in the same PMD as the rest of the fixmap.
* On 4k pages, we'll use section mappings for the FDT so we only
* have to be in the same PUD.
*/
BUILD_BUG_ON(dt_virt_base % SZ_2M);
BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT !=
__fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT);
offset = dt_phys % SWAPPER_BLOCK_SIZE;
dt_virt = (void *)dt_virt_base + offset;
/* map the first chunk so we can read the size from the header */
create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE),
dt_virt_base, SWAPPER_BLOCK_SIZE, prot);
if (fdt_magic(dt_virt) != FDT_MAGIC)
return NULL;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
*size = fdt_totalsize(dt_virt);
if (*size > MAX_FDT_SIZE)
return NULL;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
if (offset + *size > SWAPPER_BLOCK_SIZE)
create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
round_up(offset + *size, SWAPPER_BLOCK_SIZE), prot);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
return dt_virt;
}
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 20:12:01 +07:00
void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
{
void *dt_virt;
int size;
dt_virt = __fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO);
if (!dt_virt)
return NULL;
memblock_reserve(dt_phys, size);
return dt_virt;
}
int __init arch_ioremap_pud_supported(void)
{
/* only 4k granule supports level 1 block mappings */
return IS_ENABLED(CONFIG_ARM64_4K_PAGES);
}
int __init arch_ioremap_pmd_supported(void)
{
return 1;
}
int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
{
pgprot_t sect_prot = __pgprot(PUD_TYPE_SECT |
pgprot_val(mk_sect_prot(prot)));
pud_t new_pud = pfn_pud(__phys_to_pfn(phys), sect_prot);
/* Only allow permission changes for now */
if (!pgattr_change_is_safe(READ_ONCE(pud_val(*pudp)),
pud_val(new_pud)))
return 0;
BUG_ON(phys & ~PUD_MASK);
set_pud(pudp, new_pud);
return 1;
}
int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
{
pgprot_t sect_prot = __pgprot(PMD_TYPE_SECT |
pgprot_val(mk_sect_prot(prot)));
pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), sect_prot);
/* Only allow permission changes for now */
if (!pgattr_change_is_safe(READ_ONCE(pmd_val(*pmdp)),
pmd_val(new_pmd)))
return 0;
BUG_ON(phys & ~PMD_MASK);
set_pmd(pmdp, new_pmd);
return 1;
}
int pud_clear_huge(pud_t *pudp)
{
if (!pud_sect(READ_ONCE(*pudp)))
return 0;
pud_clear(pudp);
return 1;
}
int pmd_clear_huge(pmd_t *pmdp)
{
if (!pmd_sect(READ_ONCE(*pmdp)))
return 0;
pmd_clear(pmdp);
return 1;
}
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
{
pte_t *table;
pmd_t pmd;
pmd = READ_ONCE(*pmdp);
if (!pmd_table(pmd)) {
VM_WARN_ON(1);
return 1;
}
table = pte_offset_kernel(pmdp, addr);
pmd_clear(pmdp);
__flush_tlb_kernel_pgtable(addr);
pte_free_kernel(NULL, table);
return 1;
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
}
int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
{
pmd_t *table;
pmd_t *pmdp;
pud_t pud;
unsigned long next, end;
pud = READ_ONCE(*pudp);
if (!pud_table(pud)) {
VM_WARN_ON(1);
return 1;
}
table = pmd_offset(pudp, addr);
pmdp = table;
next = addr;
end = addr + PUD_SIZE;
do {
pmd_free_pte_page(pmdp, next);
} while (pmdp++, next += PMD_SIZE, next != end);
pud_clear(pudp);
__flush_tlb_kernel_pgtable(addr);
pmd_free(NULL, table);
return 1;
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
}
int p4d_free_pud_page(p4d_t *p4d, unsigned long addr)
{
return 0; /* Don't attempt a block mapping */
}
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size, struct vmem_altmap *altmap,
bool want_memblock)
{
int flags = 0;
if (rodata_full || debug_pagealloc_enabled())
flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
size, PAGE_KERNEL, pgd_pgtable_alloc, flags);
return __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT,
altmap, want_memblock);
}
#endif