linux_dsm_epyc7002/arch/arm/boot/dts/da850.dtsi

922 lines
23 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <dt-bindings/interrupt-controller/irq.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases { };
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x0>;
};
arm {
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
};
};
clocks: clocks {
ref_clk: ref_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref_clk";
};
sata_refclk: sata_refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "sata_refclk";
status = "disabled";
};
usb_refclkin: usb_refclkin {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "usb_refclkin";
status = "disabled";
};
};
dsp: dsp@11800000 {
compatible = "ti,da850-dsp";
reg = <0x11800000 0x40000>,
<0x11e00000 0x8000>,
<0x11f00000 0x8000>,
<0x01c14044 0x4>,
<0x01c14174 0x8>;
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
interrupt-parent = <&intc>;
interrupts = <28>;
clocks = <&psc0 15>;
resets = <&psc0 15>;
status = "disabled";
};
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
psc0: clock-controller@10000 {
compatible = "ti,da850-psc0";
reg = <0x10000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
<&pll0_sysclk 4>, <&pll0_sysclk 6>,
<&async1_clk>;
clock-names = "pll0_sysclk1", "pll0_sysclk2",
"pll0_sysclk4", "pll0_sysclk6",
"async1";
};
pll0: clock-controller@11000 {
compatible = "ti,da850-pll0";
reg = <0x11000 0x1000>;
clocks = <&ref_clk>, <&pll1_sysclk 3>;
clock-names = "clksrc", "extclksrc";
pll0_pllout: pllout {
#clock-cells = <0>;
};
pll0_sysclk: sysclk {
#clock-cells = <1>;
};
pll0_auxclk: auxclk {
#clock-cells = <0>;
};
pll0_obsclk: obsclk {
#clock-cells = <0>;
};
};
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#pinctrl-cells = <2>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 17 0x8>,
<&range 17 8 0x4>,
<&range 26 8 0x4>,
<&range 34 80 0x8>,
<&range 129 31 0x8>;
status = "disabled";
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
pinctrl-single,bits = <
/* UART0_RTS UART0_CTS */
0x0c 0x22000000 0xff000000
>;
};
serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
pinctrl-single,bits = <
/* UART0_TXD UART0_RXD */
0x0c 0x00220000 0x00ff0000
>;
};
serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
pinctrl-single,bits = <
/* UART1_CTS UART1_RTS */
0x00 0x00440000 0x00ff0000
>;
};
serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
pinctrl-single,bits = <
/* UART1_TXD UART1_RXD */
0x10 0x22000000 0xff000000
>;
};
serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
pinctrl-single,bits = <
/* UART2_CTS UART2_RTS */
0x00 0x44000000 0xff000000
>;
};
serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
pinctrl-single,bits = <
/* UART2_TXD UART2_RXD */
0x10 0x00220000 0x00ff0000
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
/* I2C0_SDA,I2C0_SCL */
0x10 0x00002200 0x0000ff00
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,bits = <
/* I2C1_SDA, I2C1_SCL */
0x10 0x00440000 0x00ff0000
>;
};
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
* MMCSD0_DAT[1] MMCSD0_DAT[0]
* MMCSD0_CMD MMCSD0_CLK
*/
0x28 0x00222222 0x00ffffff
>;
};
ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
pinctrl-single,bits = <
/* EPWM0A */
0xc 0x00000002 0x0000000f
>;
};
ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
pinctrl-single,bits = <
/* EPWM0B */
0xc 0x00000020 0x000000f0
>;
};
ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
pinctrl-single,bits = <
/* EPWM1A */
0x14 0x00000002 0x0000000f
>;
};
ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
pinctrl-single,bits = <
/* EPWM1B */
0x14 0x00000020 0x000000f0
>;
};
ecap0_pins: pinmux_ecap0_pins {
pinctrl-single,bits = <
/* ECAP0_APWM0 */
0x8 0x20000000 0xf0000000
>;
};
ecap1_pins: pinmux_ecap1_pins {
pinctrl-single,bits = <
/* ECAP1_APWM1 */
0x4 0x40000000 0xf0000000
>;
};
ecap2_pins: pinmux_ecap2_pins {
pinctrl-single,bits = <
/* ECAP2_APWM2 */
0x4 0x00000004 0x0000000f
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0xc 0x00001101 0x0000ff0f
>;
};
spi0_cs0_pin: pinmux_spi0_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x10 0x00000010 0x000000f0
>;
};
spi0_cs3_pin: pinmux_spi0_cs3_pin {
pinctrl-single,bits = <
/* CS3 */
0xc 0x01000000 0x0f000000
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0x14 0x00110100 0x00ff0f00
>;
};
spi1_cs0_pin: pinmux_spi1_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x14 0x00000010 0x000000f0
>;
};
mdio_pins: pinmux_mdio_pins {
pinctrl-single,bits = <
/* MDIO_CLK, MDIO_D */
0x10 0x00000088 0x000000ff
>;
};
mii_pins: pinmux_mii_pins {
pinctrl-single,bits = <
/*
* MII_TXEN, MII_TXCLK, MII_COL
* MII_TXD_3, MII_TXD_2, MII_TXD_1
* MII_TXD_0
*/
0x8 0x88888880 0xfffffff0
/*
* MII_RXER, MII_CRS, MII_RXCLK
* MII_RXDV, MII_RXD_3, MII_RXD_2
* MII_RXD_1, MII_RXD_0
*/
0xc 0x88888888 0xffffffff
>;
};
lcd_pins: pinmux_lcd_pins {
pinctrl-single,bits = <
/*
* LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
* LCD_D[6], LCD_D[7]
*/
0x40 0x22222200 0xffffff00
/*
* LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
* LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
*/
0x44 0x22222222 0xffffffff
/* LCD_D[8], LCD_D[9] */
0x48 0x00000022 0x000000ff
/* LCD_PCLK */
0x48 0x02000000 0x0f000000
/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
0x4c 0x02000022 0x0f0000ff
>;
};
vpif_capture_pins: vpif_capture_pins {
pinctrl-single,bits = <
/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
0x38 0x11111111 0xffffffff
/* VP_DIN[10..15,0..1] */
0x3c 0x11111111 0xffffffff
/* VP_DIN[8..9] */
0x40 0x00000011 0x000000ff
>;
};
vpif_display_pins: vpif_display_pins {
pinctrl-single,bits = <
/* VP_DOUT[2..7] */
0x40 0x11111100 0xffffff00
/* VP_DOUT[10..15,0..1] */
0x44 0x11111111 0xffffffff
/* VP_DOUT[8..9] */
0x48 0x00000011 0x000000ff
/*
* VP_CLKOUT3, VP_CLKIN3,
* VP_CLKOUT2, VP_CLKIN2
*/
0x4c 0x00111100 0x00ffff00
>;
};
};
prictrl: priority-controller@14110 {
compatible = "ti,da850-mstpri";
reg = <0x14110 0x0c>;
status = "disabled";
};
cfgchip: chip-controller@1417c {
compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
reg = <0x1417c 0x14>;
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
#phy-cells = <1>;
clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
clock-names = "usb0_clk48", "usb1_clk48";
status = "disabled";
};
usb_phy_clk: usb-phy-clocks {
compatible = "ti,da830-usb-phy-clocks";
#clock-cells = <1>;
clocks = <&psc1 1>, <&usb_refclkin>,
<&pll0_auxclk>;
clock-names = "fck", "usb_refclkin", "auxclk";
};
ehrpwm_tbclk: ehrpwm_tbclk {
compatible = "ti,da830-tbclksync";
#clock-cells = <0>;
clocks = <&psc1 17>;
clock-names = "fck";
};
div4p5_clk: div4.5 {
compatible = "ti,da830-div4p5ena";
#clock-cells = <0>;
clocks = <&pll0_pllout>;
clock-names = "pll0_pllout";
};
async1_clk: async1 {
compatible = "ti,da850-async1-clksrc";
#clock-cells = <0>;
clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
clock-names = "pll0_sysclk3", "div4.5";
};
async3_clk: async3 {
compatible = "ti,da850-async3-clksrc";
#clock-cells = <0>;
clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
clock-names = "pll0_sysclk2", "pll1_sysclk2";
};
};
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
power-domains = <&psc0 0>;
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 2>;
};
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma1_tptc0 7>;
power-domains = <&psc1 0>;
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc1 21>;
};
serial0: serial@42000 {
compatible = "ti,da830-uart", "ns16550a";
reg = <0x42000 0x100>;
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <25>;
clocks = <&psc0 9>;
power-domains = <&psc0 9>;
status = "disabled";
};
serial1: serial@10c000 {
compatible = "ti,da830-uart", "ns16550a";
reg = <0x10c000 0x100>;
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <53>;
clocks = <&psc1 12>;
power-domains = <&psc1 12>;
status = "disabled";
};
serial2: serial@10d000 {
compatible = "ti,da830-uart", "ns16550a";
reg = <0x10d000 0x100>;
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <61>;
clocks = <&psc1 13>;
power-domains = <&psc1 13>;
status = "disabled";
};
rtc0: rtc@23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
clocks = <&pll0_auxclk>;
clock-names = "int-clk";
status = "disabled";
};
i2c0: i2c@22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pll0_auxclk>;
status = "disabled";
};
i2c1: i2c@228000 {
compatible = "ti,davinci-i2c";
reg = <0x228000 0x1000>;
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&psc1 11>;
power-domains = <&psc1 11>;
status = "disabled";
};
clocksource: timer@20000 {
compatible = "ti,da830-timer";
reg = <0x20000 0x1000>;
interrupts = <21>, <22>;
interrupt-names = "tint12", "tint34";
clocks = <&pll0_auxclk>;
};
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
clocks = <&pll0_auxclk>;
status = "disabled";
};
mmc0: mmc@40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
cap-sd-highspeed;
cap-mmc-highspeed;
interrupts = <16>;
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
clocks = <&psc0 5>;
status = "disabled";
};
vpif: video@217000 {
compatible = "ti,da850-vpif";
reg = <0x217000 0x1000>;
interrupts = <92>;
power-domains = <&psc1 9>;
status = "disabled";
/* VPIF capture port */
port@0 {
#address-cells = <1>;
#size-cells = <0>;
};
/* VPIF display port */
port@1 {
#address-cells = <1>;
#size-cells = <0>;
};
};
mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
cap-sd-highspeed;
cap-mmc-highspeed;
interrupts = <72>;
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
clocks = <&psc1 18>;
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 04:43:56 +07:00
ehrpwm0: pwm@300000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
clock-names = "fck", "tbclk";
power-domains = <&psc1 17>;
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 04:43:56 +07:00
ehrpwm1: pwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
clock-names = "fck", "tbclk";
power-domains = <&psc1 17>;
status = "disabled";
};
ecap0: ecap@306000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
clocks = <&psc1 20>;
clock-names = "fck";
power-domains = <&psc1 20>;
status = "disabled";
};
ecap1: ecap@307000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
clocks = <&psc1 20>;
clock-names = "fck";
power-domains = <&psc1 20>;
status = "disabled";
};
ecap2: ecap@308000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
clocks = <&psc1 20>;
clock-names = "fck";
power-domains = <&psc1 20>;
status = "disabled";
};
spi0: spi@41000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
dmas = <&edma0 14 0>, <&edma0 15 0>;
dma-names = "rx", "tx";
clocks = <&psc0 4>;
power-domains = <&psc0 4>;
status = "disabled";
};
spi1: spi@30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x30e000 0x1000>;
num-cs = <4>;
ti,davinci-spi-intr-line = <1>;
interrupts = <56>;
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
clocks = <&psc1 10>;
power-domains = <&psc1 10>;
status = "disabled";
};
usb0: usb@200000 {
compatible = "ti,da830-musb";
reg = <0x200000 0x1000>;
ranges;
interrupts = <58>;
interrupt-names = "mc";
dr_mode = "otg";
phys = <&usb_phy 0>;
phy-names = "usb-phy";
clocks = <&psc1 1>;
clock-ranges;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
&cppi41dma 2 0 &cppi41dma 3 0
&cppi41dma 0 1 &cppi41dma 1 1
&cppi41dma 2 1 &cppi41dma 3 1>;
dma-names =
"rx1", "rx2", "rx3", "rx4",
"tx1", "tx2", "tx3", "tx4";
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
reg = <0x201000 0x1000
0x202000 0x1000
0x204000 0x4000>;
reg-names = "controller",
"scheduler", "queuemgr";
interrupts = <58>;
#dma-cells = <2>;
#dma-channels = <4>;
power-domains = <&psc1 1>;
status = "okay";
};
};
sata: sata@218000 {
compatible = "ti,da850-ahci";
reg = <0x218000 0x2000>, <0x22c018 0x4>;
interrupts = <67>;
clocks = <&psc1 8>, <&sata_refclk>;
clock-names = "fck", "refclk";
status = "disabled";
};
pll1: clock-controller@21a000 {
compatible = "ti,da850-pll1";
reg = <0x21a000 0x1000>;
clocks = <&ref_clk>;
clock-names = "clksrc";
pll1_sysclk: sysclk {
#clock-cells = <1>;
};
pll1_obsclk: obsclk {
#clock-cells = <0>;
};
};
mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
clocks = <&psc1 5>;
clock-names = "fck";
power-domains = <&psc1 5>;
status = "disabled";
};
eth0: ethernet@220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
ti,davinci-ctrl-mod-reg-offset = <0x2000>;
ti,davinci-ctrl-ram-offset = <0>;
ti,davinci-ctrl-ram-size = <0x2000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33
34
35
36
>;
clocks = <&psc1 5>;
power-domains = <&psc1 5>;
status = "disabled";
};
usb1: usb@225000 {
compatible = "ti,da830-ohci";
reg = <0x225000 0x1000>;
interrupts = <59>;
phys = <&usb_phy 1>;
phy-names = "usb-phy";
clocks = <&psc1 2>;
status = "disabled";
};
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x226000 0x1000>;
interrupts = <42 43 44 45 46 47 48 49 50>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&psc1 3>;
clock-names = "gpio";
status = "disabled";
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&pmx_core 0 15 1>,
<&pmx_core 1 14 1>,
<&pmx_core 2 13 1>,
<&pmx_core 3 12 1>,
<&pmx_core 4 11 1>,
<&pmx_core 5 10 1>,
<&pmx_core 6 9 1>,
<&pmx_core 7 8 1>,
<&pmx_core 8 7 1>,
<&pmx_core 9 6 1>,
<&pmx_core 10 5 1>,
<&pmx_core 11 4 1>,
<&pmx_core 12 3 1>,
<&pmx_core 13 2 1>,
<&pmx_core 14 1 1>,
<&pmx_core 15 0 1>,
<&pmx_core 16 39 1>,
<&pmx_core 17 38 1>,
<&pmx_core 18 37 1>,
<&pmx_core 19 36 1>,
<&pmx_core 20 35 1>,
<&pmx_core 21 34 1>,
<&pmx_core 22 33 1>,
<&pmx_core 23 32 1>,
<&pmx_core 24 24 1>,
<&pmx_core 25 22 1>,
<&pmx_core 26 21 1>,
<&pmx_core 27 20 1>,
<&pmx_core 28 19 1>,
<&pmx_core 29 18 1>,
<&pmx_core 30 17 1>,
<&pmx_core 31 16 1>,
<&pmx_core 32 55 1>,
<&pmx_core 33 54 1>,
<&pmx_core 34 53 1>,
<&pmx_core 35 52 1>,
<&pmx_core 36 51 1>,
<&pmx_core 37 50 1>,
<&pmx_core 38 49 1>,
<&pmx_core 39 48 1>,
<&pmx_core 40 47 1>,
<&pmx_core 41 46 1>,
<&pmx_core 42 45 1>,
<&pmx_core 43 44 1>,
<&pmx_core 44 43 1>,
<&pmx_core 45 42 1>,
<&pmx_core 46 41 1>,
<&pmx_core 47 40 1>,
<&pmx_core 48 71 1>,
<&pmx_core 49 70 1>,
<&pmx_core 50 69 1>,
<&pmx_core 51 68 1>,
<&pmx_core 52 67 1>,
<&pmx_core 53 66 1>,
<&pmx_core 54 65 1>,
<&pmx_core 55 64 1>,
<&pmx_core 56 63 1>,
<&pmx_core 57 62 1>,
<&pmx_core 58 61 1>,
<&pmx_core 59 60 1>,
<&pmx_core 60 59 1>,
<&pmx_core 61 58 1>,
<&pmx_core 62 57 1>,
<&pmx_core 63 56 1>,
<&pmx_core 64 87 1>,
<&pmx_core 65 86 1>,
<&pmx_core 66 85 1>,
<&pmx_core 67 84 1>,
<&pmx_core 68 83 1>,
<&pmx_core 69 82 1>,
<&pmx_core 70 81 1>,
<&pmx_core 71 80 1>,
<&pmx_core 72 70 1>,
<&pmx_core 73 78 1>,
<&pmx_core 74 77 1>,
<&pmx_core 75 76 1>,
<&pmx_core 76 75 1>,
<&pmx_core 77 74 1>,
<&pmx_core 78 73 1>,
<&pmx_core 79 72 1>,
<&pmx_core 80 103 1>,
<&pmx_core 81 102 1>,
<&pmx_core 82 101 1>,
<&pmx_core 83 100 1>,
<&pmx_core 84 99 1>,
<&pmx_core 85 98 1>,
<&pmx_core 86 97 1>,
<&pmx_core 87 96 1>,
<&pmx_core 88 95 1>,
<&pmx_core 89 94 1>,
<&pmx_core 90 93 1>,
<&pmx_core 91 92 1>,
<&pmx_core 92 91 1>,
<&pmx_core 93 90 1>,
<&pmx_core 94 89 1>,
<&pmx_core 95 88 1>,
<&pmx_core 96 158 1>,
<&pmx_core 97 157 1>,
<&pmx_core 98 156 1>,
<&pmx_core 99 155 1>,
<&pmx_core 100 154 1>,
<&pmx_core 101 129 1>,
<&pmx_core 102 113 1>,
<&pmx_core 103 112 1>,
<&pmx_core 104 111 1>,
<&pmx_core 105 110 1>,
<&pmx_core 106 109 1>,
<&pmx_core 107 108 1>,
<&pmx_core 108 107 1>,
<&pmx_core 109 106 1>,
<&pmx_core 110 105 1>,
<&pmx_core 111 104 1>,
<&pmx_core 112 145 1>,
<&pmx_core 113 144 1>,
<&pmx_core 114 143 1>,
<&pmx_core 115 142 1>,
<&pmx_core 116 141 1>,
<&pmx_core 117 140 1>,
<&pmx_core 118 139 1>,
<&pmx_core 119 138 1>,
<&pmx_core 120 137 1>,
<&pmx_core 121 136 1>,
<&pmx_core 122 135 1>,
<&pmx_core 123 134 1>,
<&pmx_core 124 133 1>,
<&pmx_core 125 132 1>,
<&pmx_core 126 131 1>,
<&pmx_core 127 130 1>,
<&pmx_core 128 159 1>,
<&pmx_core 129 31 1>,
<&pmx_core 130 30 1>,
<&pmx_core 131 20 1>,
<&pmx_core 132 28 1>,
<&pmx_core 133 27 1>,
<&pmx_core 134 26 1>,
<&pmx_core 135 23 1>,
<&pmx_core 136 153 1>,
<&pmx_core 137 152 1>,
<&pmx_core 138 151 1>,
<&pmx_core 139 150 1>,
<&pmx_core 140 149 1>,
<&pmx_core 141 148 1>,
<&pmx_core 142 147 1>,
<&pmx_core 143 146 1>;
};
psc1: clock-controller@227000 {
compatible = "ti,da850-psc1";
reg = <0x227000 0x1000>;
#clock-cells = <1>;
#power-domain-cells = <1>;
clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
<&async3_clk>;
clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
assigned-clocks = <&async3_clk>;
assigned-clock-parents = <&pll1_sysclk 2>;
};
pinconf: pin-controller@22c00c {
compatible = "ti,da850-pupd";
reg = <0x22c00c 0x8>;
status = "disabled";
};
mcasp0: mcasp@100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <54>;
interrupt-names = "common";
power-domains = <&psc1 7>;
status = "disabled";
dmas = <&edma0 1 1>,
<&edma0 0 1>;
dma-names = "tx", "rx";
};
lcdc: display@213000 {
compatible = "ti,da850-tilcdc";
reg = <0x213000 0x1000>;
interrupts = <52>;
max-pixelclock = <37500>;
clocks = <&psc1 16>;
clock-names = "fck";
power-domains = <&psc1 16>;
status = "disabled";
};
};
aemif: aemif@68000000 {
compatible = "ti,da850-aemif";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x68000000 0x00008000>;
ranges = <0 0 0x60000000 0x08000000
1 0 0x68000000 0x00008000>;
clocks = <&psc0 3>;
clock-names = "aemif";
clock-ranges;
status = "disabled";
};
memctrl: memory-controller@b0000000 {
compatible = "ti,da850-ddr-controller";
reg = <0xb0000000 0xe8>;
status = "disabled";
};
};