linux_dsm_epyc7002/arch/arm/boot/dts/da850.dtsi

433 lines
10 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
arm {
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
};
};
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
status = "disabled";
serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
pinctrl-single,bits = <
/* UART0_RTS UART0_CTS */
0x0c 0x22000000 0xff000000
>;
};
serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
pinctrl-single,bits = <
/* UART0_TXD UART0_RXD */
0x0c 0x00220000 0x00ff0000
>;
};
serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
pinctrl-single,bits = <
/* UART1_CTS UART1_RTS */
0x00 0x00440000 0x00ff0000
>;
};
serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
pinctrl-single,bits = <
/* UART1_TXD UART1_RXD */
0x10 0x22000000 0xff000000
>;
};
serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
pinctrl-single,bits = <
/* UART2_CTS UART2_RTS */
0x00 0x44000000 0xff000000
>;
};
serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
pinctrl-single,bits = <
/* UART2_TXD UART2_RXD */
0x10 0x00220000 0x00ff0000
>;
};
nand_cs3_pins: pinmux_nand_pins {
pinctrl-single,bits = <
/* EMA_OE, EMA_WE */
0x1c 0x00110000 0x00ff0000
/* EMA_CS[4],EMA_CS[3]*/
0x1c 0x00000110 0x00000ff0
/*
* EMA_D[0], EMA_D[1], EMA_D[2],
* EMA_D[3], EMA_D[4], EMA_D[5],
* EMA_D[6], EMA_D[7]
*/
0x24 0x11111111 0xffffffff
/* EMA_A[1], EMA_A[2] */
0x30 0x01100000 0x0ff00000
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
/* I2C0_SDA,I2C0_SCL */
0x10 0x00002200 0x0000ff00
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,bits = <
/* I2C1_SDA, I2C1_SCL */
0x10 0x00440000 0x00ff0000
>;
};
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
* MMCSD0_DAT[1] MMCSD0_DAT[0]
* MMCSD0_CMD MMCSD0_CLK
*/
0x28 0x00222222 0x00ffffff
>;
};
ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
pinctrl-single,bits = <
/* EPWM0A */
0xc 0x00000002 0x0000000f
>;
};
ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
pinctrl-single,bits = <
/* EPWM0B */
0xc 0x00000020 0x000000f0
>;
};
ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
pinctrl-single,bits = <
/* EPWM1A */
0x14 0x00000002 0x0000000f
>;
};
ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
pinctrl-single,bits = <
/* EPWM1B */
0x14 0x00000020 0x000000f0
>;
};
ecap0_pins: pinmux_ecap0_pins {
pinctrl-single,bits = <
/* ECAP0_APWM0 */
0x8 0x20000000 0xf0000000
>;
};
ecap1_pins: pinmux_ecap1_pins {
pinctrl-single,bits = <
/* ECAP1_APWM1 */
0x4 0x40000000 0xf0000000
>;
};
ecap2_pins: pinmux_ecap2_pins {
pinctrl-single,bits = <
/* ECAP2_APWM2 */
0x4 0x00000004 0x0000000f
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0xc 0x00001101 0x0000ff0f
>;
};
spi0_cs0_pin: pinmux_spi0_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x10 0x00000010 0x000000f0
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0x14 0x00110100 0x00ff0f00
>;
};
spi1_cs0_pin: pinmux_spi1_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x14 0x00000010 0x000000f0
>;
};
mdio_pins: pinmux_mdio_pins {
pinctrl-single,bits = <
/* MDIO_CLK, MDIO_D */
0x10 0x00000088 0x000000ff
>;
};
mii_pins: pinmux_mii_pins {
pinctrl-single,bits = <
/*
* MII_TXEN, MII_TXCLK, MII_COL
* MII_TXD_3, MII_TXD_2, MII_TXD_1
* MII_TXD_0
*/
0x8 0x88888880 0xfffffff0
/*
* MII_RXER, MII_CRS, MII_RXCLK
* MII_RXDV, MII_RXD_3, MII_RXD_2
* MII_RXD_1, MII_RXD_0
*/
0xc 0x88888888 0xffffffff
>;
};
};
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
};
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma1_tptc0 7>;
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
serial0: serial@42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@10c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@10d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
rtc0: rtc@23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
i2c0: i2c@22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@228000 {
compatible = "ti,davinci-i2c";
reg = <0x228000 0x1000>;
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
mmc0: mmc@40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
status = "disabled";
};
mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 04:43:56 +07:00
ehrpwm0: pwm@300000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 04:43:56 +07:00
ehrpwm1: pwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@306000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@307000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@308000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
spi0: spi@41000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
status = "disabled";
};
spi1: spi@30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x30e000 0x1000>;
num-cs = <4>;
ti,davinci-spi-intr-line = <1>;
interrupts = <56>;
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
status = "disabled";
};
mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
status = "disabled";
};
eth0: ethernet@220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
ti,davinci-ctrl-mod-reg-offset = <0x2000>;
ti,davinci-ctrl-ram-offset = <0>;
ti,davinci-ctrl-ram-size = <0x2000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33
34
35
36
>;
status = "disabled";
};
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x226000 0x1000>;
interrupts = <42 IRQ_TYPE_EDGE_BOTH
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
status = "disabled";
};
mcasp0: mcasp@100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <54>;
interrupt-names = "common";
status = "disabled";
dmas = <&edma0 1 1>,
<&edma0 0 1>;
dma-names = "tx", "rx";
};
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
reg = <0x62000000 0x807ff
0x68000000 0x8000>;
ti,davinci-chipselect = <1>;
ti,davinci-mask-ale = <0>;
ti,davinci-mask-cle = <0>;
ti,davinci-mask-chipsel = <0>;
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
status = "disabled";
};
};