linux_dsm_epyc7002/kernel/sched/cputime.c

1125 lines
27 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Simple CPU accounting cgroup controller
*/
#include "sched.h"
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
/*
* There are no locks covering percpu hardirq/softirq time.
* They are only modified in vtime_account, on corresponding CPU
* with interrupts disabled. So, writes are safe.
* They are read and saved off onto struct rq in update_rq_clock().
* This may result in other CPU reading this CPU's irq time and can
* race with irq/vtime_account on this CPU. We would either get old
* or new value with a side effect of accounting a slice of irq time to wrong
* task when irq is in progress while we read rq->clock. That is a worthy
* compromise in place of having locks on each irq in account_system_time.
*/
DEFINE_PER_CPU(struct irqtime, cpu_irqtime);
static int sched_clock_irqtime;
void enable_sched_clock_irqtime(void)
{
sched_clock_irqtime = 1;
}
void disable_sched_clock_irqtime(void)
{
sched_clock_irqtime = 0;
}
sched/cputime: Fix ksoftirqd cputime accounting regression irq_time_read() returns the irqtime minus the ksoftirqd time. This is necessary because irq_time_read() is used to substract the IRQ time from the sum_exec_runtime of a task. If we were to include the softirq time of ksoftirqd, this task would substract its own CPU time everytime it updates ksoftirqd->sum_exec_runtime which would therefore never progress. But this behaviour got broken by: a499a5a14db ("sched/cputime: Increment kcpustat directly on irqtime account") ... which now includes ksoftirqd softirq time in the time returned by irq_time_read(). This has resulted in wrong ksoftirqd cputime reported to userspace through /proc/stat and thus "top" not showing ksoftirqd when it should after intense networking load. ksoftirqd->stime happens to be correct but it gets scaled down by sum_exec_runtime through task_cputime_adjusted(). To fix this, just account the strict IRQ time in a separate counter and use it to report the IRQ time. Reported-and-tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1493129448-5356-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-25 21:10:48 +07:00
static void irqtime_account_delta(struct irqtime *irqtime, u64 delta,
enum cpu_usage_stat idx)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
u64_stats_update_begin(&irqtime->sync);
cpustat[idx] += delta;
irqtime->total += delta;
irqtime->tick_delta += delta;
u64_stats_update_end(&irqtime->sync);
}
/*
* Called before incrementing preempt_count on {soft,}irq_enter
* and before decrementing preempt_count on {soft,}irq_exit.
*/
void irqtime_account_irq(struct task_struct *curr)
{
struct irqtime *irqtime = this_cpu_ptr(&cpu_irqtime);
s64 delta;
int cpu;
if (!sched_clock_irqtime)
return;
cpu = smp_processor_id();
delta = sched_clock_cpu(cpu) - irqtime->irq_start_time;
irqtime->irq_start_time += delta;
/*
* We do not account for softirq time from ksoftirqd here.
* We want to continue accounting softirq time to ksoftirqd thread
* in that case, so as not to confuse scheduler with a special task
* that do not consume any time, but still wants to run.
*/
sched/cputime: Fix ksoftirqd cputime accounting regression irq_time_read() returns the irqtime minus the ksoftirqd time. This is necessary because irq_time_read() is used to substract the IRQ time from the sum_exec_runtime of a task. If we were to include the softirq time of ksoftirqd, this task would substract its own CPU time everytime it updates ksoftirqd->sum_exec_runtime which would therefore never progress. But this behaviour got broken by: a499a5a14db ("sched/cputime: Increment kcpustat directly on irqtime account") ... which now includes ksoftirqd softirq time in the time returned by irq_time_read(). This has resulted in wrong ksoftirqd cputime reported to userspace through /proc/stat and thus "top" not showing ksoftirqd when it should after intense networking load. ksoftirqd->stime happens to be correct but it gets scaled down by sum_exec_runtime through task_cputime_adjusted(). To fix this, just account the strict IRQ time in a separate counter and use it to report the IRQ time. Reported-and-tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1493129448-5356-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-25 21:10:48 +07:00
if (hardirq_count())
irqtime_account_delta(irqtime, delta, CPUTIME_IRQ);
else if (in_serving_softirq() && curr != this_cpu_ksoftirqd())
irqtime_account_delta(irqtime, delta, CPUTIME_SOFTIRQ);
}
EXPORT_SYMBOL_GPL(irqtime_account_irq);
static u64 irqtime_tick_accounted(u64 maxtime)
{
struct irqtime *irqtime = this_cpu_ptr(&cpu_irqtime);
u64 delta;
delta = min(irqtime->tick_delta, maxtime);
irqtime->tick_delta -= delta;
return delta;
}
#else /* CONFIG_IRQ_TIME_ACCOUNTING */
#define sched_clock_irqtime (0)
static u64 irqtime_tick_accounted(u64 dummy)
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
{
return 0;
}
#endif /* !CONFIG_IRQ_TIME_ACCOUNTING */
static inline void task_group_account_field(struct task_struct *p, int index,
u64 tmp)
{
/*
* Since all updates are sure to touch the root cgroup, we
* get ourselves ahead and touch it first. If the root cgroup
* is the only cgroup, then nothing else should be necessary.
*
*/
__this_cpu_add(kernel_cpustat.cpustat[index], tmp);
cgroup_account_cputime_field(p, index, tmp);
}
/*
* Account user CPU time to a process.
* @p: the process that the CPU time gets accounted to
* @cputime: the CPU time spent in user space since the last update
*/
void account_user_time(struct task_struct *p, u64 cputime)
{
int index;
/* Add user time to process. */
p->utime += cputime;
account_group_user_time(p, cputime);
index = (task_nice(p) > 0) ? CPUTIME_NICE : CPUTIME_USER;
/* Add user time to cpustat. */
task_group_account_field(p, index, cputime);
/* Account for user time used */
acct_account_cputime(p);
}
/*
* Account guest CPU time to a process.
* @p: the process that the CPU time gets accounted to
* @cputime: the CPU time spent in virtual machine since the last update
*/
void account_guest_time(struct task_struct *p, u64 cputime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
/* Add guest time to process. */
p->utime += cputime;
account_group_user_time(p, cputime);
p->gtime += cputime;
/* Add guest time to cpustat. */
if (task_nice(p) > 0) {
cpustat[CPUTIME_NICE] += cputime;
cpustat[CPUTIME_GUEST_NICE] += cputime;
} else {
cpustat[CPUTIME_USER] += cputime;
cpustat[CPUTIME_GUEST] += cputime;
}
}
/*
* Account system CPU time to a process and desired cpustat field
* @p: the process that the CPU time gets accounted to
* @cputime: the CPU time spent in kernel space since the last update
* @index: pointer to cpustat field that has to be updated
*/
void account_system_index_time(struct task_struct *p,
u64 cputime, enum cpu_usage_stat index)
{
/* Add system time to process. */
p->stime += cputime;
account_group_system_time(p, cputime);
/* Add system time to cpustat. */
task_group_account_field(p, index, cputime);
/* Account for system time used */
acct_account_cputime(p);
}
/*
* Account system CPU time to a process.
* @p: the process that the CPU time gets accounted to
* @hardirq_offset: the offset to subtract from hardirq_count()
* @cputime: the CPU time spent in kernel space since the last update
*/
void account_system_time(struct task_struct *p, int hardirq_offset, u64 cputime)
{
int index;
if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0)) {
account_guest_time(p, cputime);
return;
}
if (hardirq_count() - hardirq_offset)
index = CPUTIME_IRQ;
else if (in_serving_softirq())
index = CPUTIME_SOFTIRQ;
else
index = CPUTIME_SYSTEM;
account_system_index_time(p, cputime, index);
}
/*
* Account for involuntary wait time.
* @cputime: the CPU time spent in involuntary wait
*/
void account_steal_time(u64 cputime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
cpustat[CPUTIME_STEAL] += cputime;
}
/*
* Account for idle time.
* @cputime: the CPU time spent in idle wait
*/
void account_idle_time(u64 cputime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
struct rq *rq = this_rq();
if (atomic_read(&rq->nr_iowait) > 0)
cpustat[CPUTIME_IOWAIT] += cputime;
else
cpustat[CPUTIME_IDLE] += cputime;
}
sched/cputime: Resync steal time when guest & host lose sync Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 09:05:46 +07:00
/*
* When a guest is interrupted for a longer amount of time, missed clock
* ticks are not redelivered later. Due to that, this function may on
* occasion account more time than the calling functions think elapsed.
*/
static __always_inline u64 steal_account_process_time(u64 maxtime)
{
#ifdef CONFIG_PARAVIRT
if (static_key_false(&paravirt_steal_enabled)) {
u64 steal;
steal = paravirt_steal_clock(smp_processor_id());
steal -= this_rq()->prev_steal_time;
steal = min(steal, maxtime);
account_steal_time(steal);
this_rq()->prev_steal_time += steal;
return steal;
}
#endif
return 0;
}
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
/*
* Account how much elapsed time was spent in steal, irq, or softirq time.
*/
static inline u64 account_other_time(u64 max)
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
{
u64 accounted;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
lockdep_assert_irqs_disabled();
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
accounted = steal_account_process_time(max);
if (accounted < max)
accounted += irqtime_tick_accounted(max - accounted);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
return accounted;
}
sched/cputime: Improve scalability by not accounting thread group tasks pending runtime Commit: d670ec13178d0 ("posix-cpu-timers: Cure SMP wobbles") started accounting thread group tasks pending runtime in thread_group_cputime(). Another commit: 6e998916dfe32 ("sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency") updated scheduler runtime statistics (call update_curr()) when reading task pending runtime. Those changes cause bad performance of SYS_times() and SYS_clock_gettimes(CLOCK_PROCESS_CPUTIME_ID) syscalls, especially on larger systems with many CPUs. While we would like to have cpuclock monotonicity kept i.e. have problems fixed by above commits stay fixed, we also would like to have good performance. However when we notice that change from commit d670ec13178d0 is not longer needed to solve problem addressed by that commit, because of change from the second commit 6e998916dfe32, we can get room for optimization. Since we update task while reading it's pending runtime in task_sched_runtime(), clock_gettime(CLOCK_PROCESS_CPUTIME_ID) will see updated values and on testcase from d670ec13178d0 process cpuclock will not be smaller than thread cpuclock. I tested the patch on testcases from commits d670ec13178d0, 6e998916dfe32 and some other cpuclock/cputimers testcases and did not found cpuclock monotonicity problems or other malfunction. This patch has the drawback that we will not provide thread group cputime up-to-date to the last moment. For example when arming cputime timer, we will arm it with possibly a bit outdated values and that timer will trigger earlier compared to behaviour without the patch. However that was the behaviour before d670ec13178d0 commit (kernel v3.1) so it's unlikely to affect applications. Patch improves related syscall performance, as measured by Giovanni's benchmarks described in commit: 6075620b0590e ("sched/cputime: Mitigate performance regression in times()/clock_gettime()") The benchmark results are: SYS_clock_gettime(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.48 2.23 ( 35.68%) 3.06 ( 11.83%) 1.08 ( 68.81%) 5 3.33 2.83 ( 14.84%) 3.25 ( 2.40%) 0.71 ( 78.55%) 8 3.37 2.84 ( 15.80%) 3.26 ( 3.30%) 0.56 ( 83.49%) 12 3.32 3.09 ( 6.69%) 3.37 ( -1.60%) 0.42 ( 87.28%) 21 4.01 3.14 ( 21.70%) 3.90 ( 2.74%) 0.35 ( 91.35%) 30 3.63 3.28 ( 9.75%) 3.36 ( 7.41%) 0.28 ( 92.23%) 48 3.71 3.02 ( 18.69%) 3.11 ( 16.27%) 0.39 ( 89.39%) 79 3.75 2.88 ( 23.23%) 3.16 ( 15.74%) 0.46 ( 87.76%) 110 3.81 2.95 ( 22.62%) 3.25 ( 14.80%) 0.56 ( 85.41%) 128 3.88 3.05 ( 21.28%) 3.31 ( 14.76%) 0.62 ( 84.10%) SYS_times(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.65 2.27 ( 37.94%) 3.25 ( 11.03%) 1.62 ( 55.71%) 5 3.45 2.78 ( 19.34%) 3.17 ( 7.92%) 2.33 ( 32.28%) 8 3.52 2.79 ( 20.66%) 3.22 ( 8.69%) 2.06 ( 41.44%) 12 3.29 3.02 ( 8.33%) 3.36 ( -2.04%) 2.00 ( 39.18%) 21 4.07 3.10 ( 23.86%) 3.92 ( 3.78%) 2.07 ( 49.18%) 30 3.87 3.33 ( 13.80%) 3.40 ( 12.17%) 1.89 ( 51.12%) 48 3.79 2.96 ( 21.94%) 3.16 ( 16.61%) 1.69 ( 55.46%) 79 3.88 2.88 ( 25.82%) 3.28 ( 15.42%) 1.60 ( 58.81%) 110 3.90 2.98 ( 23.73%) 3.38 ( 13.35%) 1.73 ( 55.61%) 128 4.00 3.10 ( 22.40%) 3.38 ( 15.45%) 1.66 ( 58.52%) Reported-and-tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/20160817093043.GA25206@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 16:30:44 +07:00
#ifdef CONFIG_64BIT
static inline u64 read_sum_exec_runtime(struct task_struct *t)
{
return t->se.sum_exec_runtime;
}
#else
static u64 read_sum_exec_runtime(struct task_struct *t)
{
u64 ns;
struct rq_flags rf;
struct rq *rq;
rq = task_rq_lock(t, &rf);
ns = t->se.sum_exec_runtime;
task_rq_unlock(rq, t, &rf);
return ns;
}
#endif
/*
* Accumulate raw cputime values of dead tasks (sig->[us]time) and live
* tasks (sum on group iteration) belonging to @tsk's group.
*/
void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
{
struct signal_struct *sig = tsk->signal;
u64 utime, stime;
struct task_struct *t;
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
unsigned int seq, nextseq;
unsigned long flags;
sched/cputime: Improve scalability by not accounting thread group tasks pending runtime Commit: d670ec13178d0 ("posix-cpu-timers: Cure SMP wobbles") started accounting thread group tasks pending runtime in thread_group_cputime(). Another commit: 6e998916dfe32 ("sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency") updated scheduler runtime statistics (call update_curr()) when reading task pending runtime. Those changes cause bad performance of SYS_times() and SYS_clock_gettimes(CLOCK_PROCESS_CPUTIME_ID) syscalls, especially on larger systems with many CPUs. While we would like to have cpuclock monotonicity kept i.e. have problems fixed by above commits stay fixed, we also would like to have good performance. However when we notice that change from commit d670ec13178d0 is not longer needed to solve problem addressed by that commit, because of change from the second commit 6e998916dfe32, we can get room for optimization. Since we update task while reading it's pending runtime in task_sched_runtime(), clock_gettime(CLOCK_PROCESS_CPUTIME_ID) will see updated values and on testcase from d670ec13178d0 process cpuclock will not be smaller than thread cpuclock. I tested the patch on testcases from commits d670ec13178d0, 6e998916dfe32 and some other cpuclock/cputimers testcases and did not found cpuclock monotonicity problems or other malfunction. This patch has the drawback that we will not provide thread group cputime up-to-date to the last moment. For example when arming cputime timer, we will arm it with possibly a bit outdated values and that timer will trigger earlier compared to behaviour without the patch. However that was the behaviour before d670ec13178d0 commit (kernel v3.1) so it's unlikely to affect applications. Patch improves related syscall performance, as measured by Giovanni's benchmarks described in commit: 6075620b0590e ("sched/cputime: Mitigate performance regression in times()/clock_gettime()") The benchmark results are: SYS_clock_gettime(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.48 2.23 ( 35.68%) 3.06 ( 11.83%) 1.08 ( 68.81%) 5 3.33 2.83 ( 14.84%) 3.25 ( 2.40%) 0.71 ( 78.55%) 8 3.37 2.84 ( 15.80%) 3.26 ( 3.30%) 0.56 ( 83.49%) 12 3.32 3.09 ( 6.69%) 3.37 ( -1.60%) 0.42 ( 87.28%) 21 4.01 3.14 ( 21.70%) 3.90 ( 2.74%) 0.35 ( 91.35%) 30 3.63 3.28 ( 9.75%) 3.36 ( 7.41%) 0.28 ( 92.23%) 48 3.71 3.02 ( 18.69%) 3.11 ( 16.27%) 0.39 ( 89.39%) 79 3.75 2.88 ( 23.23%) 3.16 ( 15.74%) 0.46 ( 87.76%) 110 3.81 2.95 ( 22.62%) 3.25 ( 14.80%) 0.56 ( 85.41%) 128 3.88 3.05 ( 21.28%) 3.31 ( 14.76%) 0.62 ( 84.10%) SYS_times(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.65 2.27 ( 37.94%) 3.25 ( 11.03%) 1.62 ( 55.71%) 5 3.45 2.78 ( 19.34%) 3.17 ( 7.92%) 2.33 ( 32.28%) 8 3.52 2.79 ( 20.66%) 3.22 ( 8.69%) 2.06 ( 41.44%) 12 3.29 3.02 ( 8.33%) 3.36 ( -2.04%) 2.00 ( 39.18%) 21 4.07 3.10 ( 23.86%) 3.92 ( 3.78%) 2.07 ( 49.18%) 30 3.87 3.33 ( 13.80%) 3.40 ( 12.17%) 1.89 ( 51.12%) 48 3.79 2.96 ( 21.94%) 3.16 ( 16.61%) 1.69 ( 55.46%) 79 3.88 2.88 ( 25.82%) 3.28 ( 15.42%) 1.60 ( 58.81%) 110 3.90 2.98 ( 23.73%) 3.38 ( 13.35%) 1.73 ( 55.61%) 128 4.00 3.10 ( 22.40%) 3.38 ( 15.45%) 1.66 ( 58.52%) Reported-and-tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/20160817093043.GA25206@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 16:30:44 +07:00
/*
* Update current task runtime to account pending time since last
* scheduler action or thread_group_cputime() call. This thread group
* might have other running tasks on different CPUs, but updating
* their runtime can affect syscall performance, so we skip account
* those pending times and rely only on values updated on tick or
* other scheduler action.
*/
if (same_thread_group(current, tsk))
(void) task_sched_runtime(current);
rcu_read_lock();
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
/* Attempt a lockless read on the first round. */
nextseq = 0;
do {
seq = nextseq;
flags = read_seqbegin_or_lock_irqsave(&sig->stats_lock, &seq);
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
times->utime = sig->utime;
times->stime = sig->stime;
times->sum_exec_runtime = sig->sum_sched_runtime;
for_each_thread(tsk, t) {
task_cputime(t, &utime, &stime);
times->utime += utime;
times->stime += stime;
sched/cputime: Improve scalability by not accounting thread group tasks pending runtime Commit: d670ec13178d0 ("posix-cpu-timers: Cure SMP wobbles") started accounting thread group tasks pending runtime in thread_group_cputime(). Another commit: 6e998916dfe32 ("sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency") updated scheduler runtime statistics (call update_curr()) when reading task pending runtime. Those changes cause bad performance of SYS_times() and SYS_clock_gettimes(CLOCK_PROCESS_CPUTIME_ID) syscalls, especially on larger systems with many CPUs. While we would like to have cpuclock monotonicity kept i.e. have problems fixed by above commits stay fixed, we also would like to have good performance. However when we notice that change from commit d670ec13178d0 is not longer needed to solve problem addressed by that commit, because of change from the second commit 6e998916dfe32, we can get room for optimization. Since we update task while reading it's pending runtime in task_sched_runtime(), clock_gettime(CLOCK_PROCESS_CPUTIME_ID) will see updated values and on testcase from d670ec13178d0 process cpuclock will not be smaller than thread cpuclock. I tested the patch on testcases from commits d670ec13178d0, 6e998916dfe32 and some other cpuclock/cputimers testcases and did not found cpuclock monotonicity problems or other malfunction. This patch has the drawback that we will not provide thread group cputime up-to-date to the last moment. For example when arming cputime timer, we will arm it with possibly a bit outdated values and that timer will trigger earlier compared to behaviour without the patch. However that was the behaviour before d670ec13178d0 commit (kernel v3.1) so it's unlikely to affect applications. Patch improves related syscall performance, as measured by Giovanni's benchmarks described in commit: 6075620b0590e ("sched/cputime: Mitigate performance regression in times()/clock_gettime()") The benchmark results are: SYS_clock_gettime(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.48 2.23 ( 35.68%) 3.06 ( 11.83%) 1.08 ( 68.81%) 5 3.33 2.83 ( 14.84%) 3.25 ( 2.40%) 0.71 ( 78.55%) 8 3.37 2.84 ( 15.80%) 3.26 ( 3.30%) 0.56 ( 83.49%) 12 3.32 3.09 ( 6.69%) 3.37 ( -1.60%) 0.42 ( 87.28%) 21 4.01 3.14 ( 21.70%) 3.90 ( 2.74%) 0.35 ( 91.35%) 30 3.63 3.28 ( 9.75%) 3.36 ( 7.41%) 0.28 ( 92.23%) 48 3.71 3.02 ( 18.69%) 3.11 ( 16.27%) 0.39 ( 89.39%) 79 3.75 2.88 ( 23.23%) 3.16 ( 15.74%) 0.46 ( 87.76%) 110 3.81 2.95 ( 22.62%) 3.25 ( 14.80%) 0.56 ( 85.41%) 128 3.88 3.05 ( 21.28%) 3.31 ( 14.76%) 0.62 ( 84.10%) SYS_times(): threads 4.7-rc7 3.18-rc3 4.7-rc7 + prefetch 4.7-rc7 + patch (pre-6e998916dfe3) 2 3.65 2.27 ( 37.94%) 3.25 ( 11.03%) 1.62 ( 55.71%) 5 3.45 2.78 ( 19.34%) 3.17 ( 7.92%) 2.33 ( 32.28%) 8 3.52 2.79 ( 20.66%) 3.22 ( 8.69%) 2.06 ( 41.44%) 12 3.29 3.02 ( 8.33%) 3.36 ( -2.04%) 2.00 ( 39.18%) 21 4.07 3.10 ( 23.86%) 3.92 ( 3.78%) 2.07 ( 49.18%) 30 3.87 3.33 ( 13.80%) 3.40 ( 12.17%) 1.89 ( 51.12%) 48 3.79 2.96 ( 21.94%) 3.16 ( 16.61%) 1.69 ( 55.46%) 79 3.88 2.88 ( 25.82%) 3.28 ( 15.42%) 1.60 ( 58.81%) 110 3.90 2.98 ( 23.73%) 3.38 ( 13.35%) 1.73 ( 55.61%) 128 4.00 3.10 ( 22.40%) 3.38 ( 15.45%) 1.66 ( 58.52%) Reported-and-tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/20160817093043.GA25206@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 16:30:44 +07:00
times->sum_exec_runtime += read_sum_exec_runtime(t);
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
}
/* If lockless access failed, take the lock. */
nextseq = 1;
} while (need_seqretry(&sig->stats_lock, seq));
done_seqretry_irqrestore(&sig->stats_lock, seq, flags);
rcu_read_unlock();
}
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
/*
* Account a tick to a process and cpustat
* @p: the process that the CPU time gets accounted to
* @user_tick: is the tick from userspace
* @rq: the pointer to rq
*
* Tick demultiplexing follows the order
* - pending hardirq update
* - pending softirq update
* - user_time
* - idle_time
* - system time
* - check for guest_time
* - else account as system_time
*
* Check for hardirq is done both for system and user time as there is
* no timer going off while we are on hardirq and hence we may never get an
* opportunity to update it solely in system time.
* p->stime and friends are only updated on system time and not on irq
* softirq as those do not count in task exec_runtime any more.
*/
static void irqtime_account_process_tick(struct task_struct *p, int user_tick,
struct rq *rq, int ticks)
{
u64 other, cputime = TICK_NSEC * ticks;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
/*
* When returning from idle, many ticks can get accounted at
* once, including some ticks of steal, irq, and softirq time.
* Subtract those ticks from the amount of time accounted to
* idle, or potentially user or system time. Due to rounding,
* other time can exceed ticks occasionally.
*/
sched/cputime: Resync steal time when guest & host lose sync Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 09:05:46 +07:00
other = account_other_time(ULONG_MAX);
if (other >= cputime)
return;
cputime -= other;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
if (this_cpu_ksoftirqd() == p) {
/*
* ksoftirqd time do not get accounted in cpu_softirq_time.
* So, we have to handle it separately here.
* Also, p->stime needs to be updated for ksoftirqd.
*/
account_system_index_time(p, cputime, CPUTIME_SOFTIRQ);
} else if (user_tick) {
account_user_time(p, cputime);
} else if (p == rq->idle) {
account_idle_time(cputime);
} else if (p->flags & PF_VCPU) { /* System time or guest time */
account_guest_time(p, cputime);
} else {
account_system_index_time(p, cputime, CPUTIME_SYSTEM);
}
}
static void irqtime_account_idle_ticks(int ticks)
{
struct rq *rq = this_rq();
irqtime_account_process_tick(current, 0, rq, ticks);
}
#else /* CONFIG_IRQ_TIME_ACCOUNTING */
static inline void irqtime_account_idle_ticks(int ticks) { }
static inline void irqtime_account_process_tick(struct task_struct *p, int user_tick,
struct rq *rq, int nr_ticks) { }
#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
/*
* Use precise platform statistics if available:
*/
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
# ifndef __ARCH_HAS_VTIME_TASK_SWITCH
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
void vtime_task_switch(struct task_struct *prev)
{
if (is_idle_task(prev))
vtime_account_idle(prev);
else
vtime_account_kernel(prev);
vtime_flush(prev);
arch_vtime_task_switch(prev);
}
# endif
/*
* Archs that account the whole time spent in the idle task
* (outside irq) as idle time can rely on this and just implement
* vtime_account_kernel() and vtime_account_idle(). Archs that
* have other meaning of the idle time (s390 only includes the
* time spent by the CPU when it's in low power mode) must override
* vtime_account().
*/
#ifndef __ARCH_HAS_VTIME_ACCOUNT
void vtime_account_irq_enter(struct task_struct *tsk)
{
if (!in_interrupt() && is_idle_task(tsk))
vtime_account_idle(tsk);
else
vtime_account_kernel(tsk);
}
EXPORT_SYMBOL_GPL(vtime_account_irq_enter);
#endif /* __ARCH_HAS_VTIME_ACCOUNT */
void cputime_adjust(struct task_cputime *curr, struct prev_cputime *prev,
u64 *ut, u64 *st)
{
*ut = curr->utime;
*st = curr->stime;
}
void task_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
{
*ut = p->utime;
*st = p->stime;
}
EXPORT_SYMBOL_GPL(task_cputime_adjusted);
void thread_group_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
{
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
*ut = cputime.utime;
*st = cputime.stime;
}
#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE: */
/*
* Account a single tick of CPU time.
* @p: the process that the CPU time gets accounted to
* @user_tick: indicates if the tick is a user or a system tick
*/
void account_process_tick(struct task_struct *p, int user_tick)
{
u64 cputime, steal;
struct rq *rq = this_rq();
if (vtime_accounting_enabled_this_cpu())
return;
if (sched_clock_irqtime) {
irqtime_account_process_tick(p, user_tick, rq, 1);
return;
}
cputime = TICK_NSEC;
sched/cputime: Resync steal time when guest & host lose sync Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 09:05:46 +07:00
steal = steal_account_process_time(ULONG_MAX);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
if (steal >= cputime)
return;
cputime -= steal;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
if (user_tick)
account_user_time(p, cputime);
else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
account_system_time(p, HARDIRQ_OFFSET, cputime);
else
account_idle_time(cputime);
}
/*
* Account multiple ticks of idle time.
* @ticks: number of stolen ticks
*/
void account_idle_ticks(unsigned long ticks)
{
u64 cputime, steal;
if (sched_clock_irqtime) {
irqtime_account_idle_ticks(ticks);
return;
}
cputime = ticks * TICK_NSEC;
steal = steal_account_process_time(ULONG_MAX);
if (steal >= cputime)
return;
cputime -= steal;
account_idle_time(cputime);
}
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
/*
* Perform (stime * rtime) / total, but avoid multiplication overflow by
* losing precision when the numbers are big.
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
*/
static u64 scale_stime(u64 stime, u64 rtime, u64 total)
{
u64 scaled;
for (;;) {
/* Make sure "rtime" is the bigger of stime/rtime */
if (stime > rtime)
swap(rtime, stime);
/* Make sure 'total' fits in 32 bits */
if (total >> 32)
goto drop_precision;
/* Does rtime (and thus stime) fit in 32 bits? */
if (!(rtime >> 32))
break;
/* Can we just balance rtime/stime rather than dropping bits? */
if (stime >> 31)
goto drop_precision;
/* We can grow stime and shrink rtime and try to make them both fit */
stime <<= 1;
rtime >>= 1;
continue;
drop_precision:
/* We drop from rtime, it has more bits than stime */
rtime >>= 1;
total >>= 1;
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
}
/*
* Make sure gcc understands that this is a 32x32->64 multiply,
* followed by a 64/32->64 divide.
*/
scaled = div_u64((u64) (u32) stime * (u64) (u32) rtime, (u32)total);
return scaled;
}
/*
* Adjust tick based cputime random precision against scheduler runtime
* accounting.
*
* Tick based cputime accounting depend on random scheduling timeslices of a
* task to be interrupted or not by the timer. Depending on these
* circumstances, the number of these interrupts may be over or
* under-optimistic, matching the real user and system cputime with a variable
* precision.
*
* Fix this by scaling these tick based values against the total runtime
* accounted by the CFS scheduler.
*
* This code provides the following guarantees:
*
* stime + utime == rtime
* stime_i+1 >= stime_i, utime_i+1 >= utime_i
*
* Assuming that rtime_i+1 >= rtime_i.
*/
void cputime_adjust(struct task_cputime *curr, struct prev_cputime *prev,
u64 *ut, u64 *st)
{
u64 rtime, stime, utime;
unsigned long flags;
/* Serialize concurrent callers such that we can honour our guarantees */
raw_spin_lock_irqsave(&prev->lock, flags);
rtime = curr->sum_exec_runtime;
/*
* This is possible under two circumstances:
* - rtime isn't monotonic after all (a bug);
* - we got reordered by the lock.
*
* In both cases this acts as a filter such that the rest of the code
* can assume it is monotonic regardless of anything else.
*/
if (prev->stime + prev->utime >= rtime)
goto out;
stime = curr->stime;
utime = curr->utime;
/*
* If either stime or utime are 0, assume all runtime is userspace.
* Once a task gets some ticks, the monotonicy code at 'update:'
* will ensure things converge to the observed ratio.
*/
if (stime == 0) {
utime = rtime;
goto update;
}
if (utime == 0) {
stime = rtime;
goto update;
}
stime = scale_stime(stime, rtime, stime + utime);
update:
/*
* Make sure stime doesn't go backwards; this preserves monotonicity
* for utime because rtime is monotonic.
*
* utime_i+1 = rtime_i+1 - stime_i
* = rtime_i+1 - (rtime_i - utime_i)
* = (rtime_i+1 - rtime_i) + utime_i
* >= utime_i
*/
if (stime < prev->stime)
stime = prev->stime;
utime = rtime - stime;
/*
* Make sure utime doesn't go backwards; this still preserves
* monotonicity for stime, analogous argument to above.
*/
if (utime < prev->utime) {
utime = prev->utime;
stime = rtime - utime;
}
prev->stime = stime;
prev->utime = utime;
out:
*ut = prev->utime;
*st = prev->stime;
raw_spin_unlock_irqrestore(&prev->lock, flags);
}
void task_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
{
struct task_cputime cputime = {
.sum_exec_runtime = p->se.sum_exec_runtime,
};
task_cputime(p, &cputime.utime, &cputime.stime);
cputime_adjust(&cputime, &p->prev_cputime, ut, st);
}
EXPORT_SYMBOL_GPL(task_cputime_adjusted);
void thread_group_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
{
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
cputime_adjust(&cputime, &p->signal->prev_cputime, ut, st);
}
#endif /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
static u64 vtime_delta(struct vtime *vtime)
{
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
unsigned long long clock;
clock = sched_clock();
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
if (clock < vtime->starttime)
return 0;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
return clock - vtime->starttime;
}
static u64 get_vtime_delta(struct vtime *vtime)
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
{
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
u64 delta = vtime_delta(vtime);
u64 other;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
sched/cputime: Resync steal time when guest & host lose sync Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17 09:05:46 +07:00
/*
* Unlike tick based timing, vtime based timing never has lost
* ticks, and no need for steal time accounting to make up for
* lost ticks. Vtime accounts a rounded version of actual
* elapsed time. Limit account_other_time to prevent rounding
* errors from causing elapsed vtime to go negative.
*/
other = account_other_time(delta);
WARN_ON_ONCE(vtime->state == VTIME_INACTIVE);
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
vtime->starttime += delta;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
return delta - other;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
}
static void vtime_account_system(struct task_struct *tsk,
struct vtime *vtime)
{
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
vtime->stime += get_vtime_delta(vtime);
if (vtime->stime >= TICK_NSEC) {
account_system_time(tsk, irq_count(), vtime->stime);
vtime->stime = 0;
}
}
static void vtime_account_guest(struct task_struct *tsk,
struct vtime *vtime)
{
vtime->gtime += get_vtime_delta(vtime);
if (vtime->gtime >= TICK_NSEC) {
account_guest_time(tsk, vtime->gtime);
vtime->gtime = 0;
}
}
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
static void __vtime_account_kernel(struct task_struct *tsk,
struct vtime *vtime)
{
/* We might have scheduled out from guest path */
if (vtime->state == VTIME_GUEST)
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
vtime_account_guest(tsk, vtime);
else
vtime_account_system(tsk, vtime);
}
void vtime_account_kernel(struct task_struct *tsk)
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
{
struct vtime *vtime = &tsk->vtime;
if (!vtime_delta(vtime))
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
return;
write_seqcount_begin(&vtime->seqcount);
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
__vtime_account_kernel(tsk, vtime);
write_seqcount_end(&vtime->seqcount);
}
void vtime_user_enter(struct task_struct *tsk)
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
{
struct vtime *vtime = &tsk->vtime;
write_seqcount_begin(&vtime->seqcount);
vtime_account_system(tsk, vtime);
vtime->state = VTIME_USER;
write_seqcount_end(&vtime->seqcount);
}
void vtime_user_exit(struct task_struct *tsk)
{
struct vtime *vtime = &tsk->vtime;
write_seqcount_begin(&vtime->seqcount);
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
vtime->utime += get_vtime_delta(vtime);
if (vtime->utime >= TICK_NSEC) {
account_user_time(tsk, vtime->utime);
vtime->utime = 0;
}
vtime->state = VTIME_SYS;
write_seqcount_end(&vtime->seqcount);
}
void vtime_guest_enter(struct task_struct *tsk)
{
struct vtime *vtime = &tsk->vtime;
/*
* The flags must be updated under the lock with
* the vtime_starttime flush and update.
* That enforces a right ordering and update sequence
* synchronization against the reader (task_gtime())
* that can thus safely catch up with a tickless delta.
*/
write_seqcount_begin(&vtime->seqcount);
vtime_account_system(tsk, vtime);
tsk->flags |= PF_VCPU;
vtime->state = VTIME_GUEST;
write_seqcount_end(&vtime->seqcount);
}
EXPORT_SYMBOL_GPL(vtime_guest_enter);
void vtime_guest_exit(struct task_struct *tsk)
{
struct vtime *vtime = &tsk->vtime;
write_seqcount_begin(&vtime->seqcount);
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
vtime_account_guest(tsk, vtime);
tsk->flags &= ~PF_VCPU;
vtime->state = VTIME_SYS;
write_seqcount_end(&vtime->seqcount);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
}
EXPORT_SYMBOL_GPL(vtime_guest_exit);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
void vtime_account_idle(struct task_struct *tsk)
{
account_idle_time(get_vtime_delta(&tsk->vtime));
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
}
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
void vtime_task_switch_generic(struct task_struct *prev)
{
struct vtime *vtime = &prev->vtime;
write_seqcount_begin(&vtime->seqcount);
if (vtime->state == VTIME_IDLE)
sched/cputime: Spare a seqcount lock/unlock cycle on context switch On context switch we are locking the vtime seqcount of the scheduling-out task twice: * On vtime_task_switch_common(), when we flush the pending vtime through vtime_account_system() * On arch_vtime_task_switch() to reset the vtime state. This is pointless as these actions can be performed without the need to unlock/lock in the middle. The reason these steps are separated is to consolidate a very small amount of common code between CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Performance in this fast path is definitely a priority over artificial code factorization so split the task switch code between GEN and NATIVE and mutualize the parts than can run under a single seqcount locked block. As a side effect, vtime_account_idle() becomes included in the seqcount protection. This happens to be a welcome preparation in order to properly support kcpustat under vtime in the future and fetch CPUTIME_IDLE without race. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191003161745.28464-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-03 23:17:45 +07:00
vtime_account_idle(prev);
else
__vtime_account_kernel(prev, vtime);
vtime->state = VTIME_INACTIVE;
vtime->cpu = -1;
write_seqcount_end(&vtime->seqcount);
vtime = &current->vtime;
write_seqcount_begin(&vtime->seqcount);
if (is_idle_task(current))
vtime->state = VTIME_IDLE;
else if (current->flags & PF_VCPU)
vtime->state = VTIME_GUEST;
else
vtime->state = VTIME_SYS;
vtime->starttime = sched_clock();
vtime->cpu = smp_processor_id();
write_seqcount_end(&vtime->seqcount);
}
void vtime_init_idle(struct task_struct *t, int cpu)
{
struct vtime *vtime = &t->vtime;
unsigned long flags;
local_irq_save(flags);
write_seqcount_begin(&vtime->seqcount);
vtime->state = VTIME_IDLE;
vtime->starttime = sched_clock();
vtime->cpu = cpu;
write_seqcount_end(&vtime->seqcount);
local_irq_restore(flags);
}
u64 task_gtime(struct task_struct *t)
{
struct vtime *vtime = &t->vtime;
unsigned int seq;
u64 gtime;
if (!vtime_accounting_enabled())
sched/cputime: Fix invalid gtime in proc /proc/stats shows invalid gtime when the thread is running in guest. When vtime accounting is not enabled, we cannot get a valid delta. The delta is calculated with now - tsk->vtime_snap, but tsk->vtime_snap is only updated when vtime accounting is runtime enabled. This patch makes task_gtime() just return gtime without computing the buggy non-existing tickless delta when vtime accounting is not enabled. Use context_tracking_is_enabled() to check if vtime is accounting on some cpu, in which case only we need to check the tickless delta. This way we fix the gtime value regression on machines not running nohz full. The kernel config contains CONFIG_VIRT_CPU_ACCOUNTING_GEN=y and CONFIG_NO_HZ_FULL_ALL=n and boot without nohz_full. I ran and stop a busy loop in VM and see the gtime in host. Dump the 43rd field which shows the gtime in every second: # while :; do awk '{print $3" "$43}' /proc/3955/task/4014/stat; sleep 1; done S 4348 R 7064566 R 7064766 R 7064967 R 7065168 S 4759 S 4759 During running busy loop, it returns large value. After applying this patch, we can see right gtime. # while :; do awk '{print $3" "$43}' /proc/10913/task/10956/stat; sleep 1; done S 5338 R 5365 R 5465 R 5566 R 5666 S 5726 S 5726 Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1447948054-28668-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-19 22:47:28 +07:00
return t->gtime;
do {
seq = read_seqcount_begin(&vtime->seqcount);
gtime = t->gtime;
if (vtime->state == VTIME_GUEST)
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
gtime += vtime->gtime + vtime_delta(vtime);
} while (read_seqcount_retry(&vtime->seqcount, seq));
return gtime;
}
/*
* Fetch cputime raw values from fields of task_struct and
* add up the pending nohz execution time since the last
* cputime snapshot.
*/
void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
{
struct vtime *vtime = &t->vtime;
unsigned int seq;
u64 delta;
if (!vtime_accounting_enabled()) {
*utime = t->utime;
*stime = t->stime;
return;
}
do {
seq = read_seqcount_begin(&vtime->seqcount);
*utime = t->utime;
*stime = t->stime;
/* Task is sleeping or idle, nothing to add */
if (vtime->state < VTIME_SYS)
continue;
delta = vtime_delta(vtime);
/*
* Task runs either in user (including guest) or kernel space,
* add pending nohz time to the right place.
*/
if (vtime->state == VTIME_SYS)
sched/cputime: Accumulate vtime on top of nsec clocksource Currently the cputime source used by vtime is jiffies. When we cross a context boundary and jiffies have changed since the last snapshot, the pending cputime is accounted to the switching out context. This system works ok if the ticks are not aligned across CPUs. If they instead are aligned (ie: all fire at the same time) and the CPUs run in userspace, the jiffies change is only observed on tick exit and therefore the user cputime is accounted as system cputime. This is because the CPU that maintains timekeeping fires its tick at the same time as the others. It updates jiffies in the middle of the tick and the other CPUs see that update on IRQ exit: CPU 0 (timekeeper) CPU 1 ------------------- ------------- jiffies = N ... run in userspace for a jiffy tick entry tick entry (sees jiffies = N) set jiffies = N + 1 tick exit tick exit (sees jiffies = N + 1) account 1 jiffy as stime Fix this with using a nanosec clock source instead of jiffies. The cputime is then accumulated and flushed everytime the pending delta reaches a jiffy in order to mitigate the accounting overhead. [ fweisbec: changelog, rebase on struct vtime, field renames, add delta on cputime readers, keep idle vtime as-is (low overhead accounting), harmonize clock sources. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1498756511-11714-6-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 00:15:11 +07:00
*stime += vtime->stime + delta;
else
*utime += vtime->utime + delta;
} while (read_seqcount_retry(&vtime->seqcount, seq));
}
static int vtime_state_check(struct vtime *vtime, int cpu)
{
/*
* We raced against a context switch, fetch the
* kcpustat task again.
*/
if (vtime->cpu != cpu && vtime->cpu != -1)
return -EAGAIN;
/*
* Two possible things here:
* 1) We are seeing the scheduling out task (prev) or any past one.
* 2) We are seeing the scheduling in task (next) but it hasn't
* passed though vtime_task_switch() yet so the pending
* cputime of the prev task may not be flushed yet.
*
* Case 1) is ok but 2) is not. So wait for a safe VTIME state.
*/
if (vtime->state == VTIME_INACTIVE)
return -EAGAIN;
return 0;
}
static u64 kcpustat_user_vtime(struct vtime *vtime)
{
if (vtime->state == VTIME_USER)
return vtime->utime + vtime_delta(vtime);
else if (vtime->state == VTIME_GUEST)
return vtime->gtime + vtime_delta(vtime);
return 0;
}
static int kcpustat_field_vtime(u64 *cpustat,
struct task_struct *tsk,
enum cpu_usage_stat usage,
int cpu, u64 *val)
{
struct vtime *vtime = &tsk->vtime;
unsigned int seq;
int err;
do {
seq = read_seqcount_begin(&vtime->seqcount);
err = vtime_state_check(vtime, cpu);
if (err < 0)
return err;
*val = cpustat[usage];
/*
* Nice VS unnice cputime accounting may be inaccurate if
* the nice value has changed since the last vtime update.
* But proper fix would involve interrupting target on nice
* updates which is a no go on nohz_full (although the scheduler
* may still interrupt the target if rescheduling is needed...)
*/
switch (usage) {
case CPUTIME_SYSTEM:
if (vtime->state == VTIME_SYS)
*val += vtime->stime + vtime_delta(vtime);
break;
case CPUTIME_USER:
if (task_nice(tsk) <= 0)
*val += kcpustat_user_vtime(vtime);
break;
case CPUTIME_NICE:
if (task_nice(tsk) > 0)
*val += kcpustat_user_vtime(vtime);
break;
case CPUTIME_GUEST:
if (vtime->state == VTIME_GUEST && task_nice(tsk) <= 0)
*val += vtime->gtime + vtime_delta(vtime);
break;
case CPUTIME_GUEST_NICE:
if (vtime->state == VTIME_GUEST && task_nice(tsk) > 0)
*val += vtime->gtime + vtime_delta(vtime);
break;
default:
break;
}
} while (read_seqcount_retry(&vtime->seqcount, seq));
return 0;
}
u64 kcpustat_field(struct kernel_cpustat *kcpustat,
enum cpu_usage_stat usage, int cpu)
{
u64 *cpustat = kcpustat->cpustat;
struct rq *rq;
u64 val;
int err;
if (!vtime_accounting_enabled_cpu(cpu))
return cpustat[usage];
rq = cpu_rq(cpu);
for (;;) {
struct task_struct *curr;
rcu_read_lock();
curr = rcu_dereference(rq->curr);
if (WARN_ON_ONCE(!curr)) {
rcu_read_unlock();
return cpustat[usage];
}
err = kcpustat_field_vtime(cpustat, curr, usage, cpu, &val);
rcu_read_unlock();
if (!err)
return val;
cpu_relax();
}
}
EXPORT_SYMBOL_GPL(kcpustat_field);
static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
const struct kernel_cpustat *src,
struct task_struct *tsk, int cpu)
{
struct vtime *vtime = &tsk->vtime;
unsigned int seq;
int err;
do {
u64 *cpustat;
u64 delta;
seq = read_seqcount_begin(&vtime->seqcount);
err = vtime_state_check(vtime, cpu);
if (err < 0)
return err;
*dst = *src;
cpustat = dst->cpustat;
/* Task is sleeping, dead or idle, nothing to add */
if (vtime->state < VTIME_SYS)
continue;
delta = vtime_delta(vtime);
/*
* Task runs either in user (including guest) or kernel space,
* add pending nohz time to the right place.
*/
if (vtime->state == VTIME_SYS) {
cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
} else if (vtime->state == VTIME_USER) {
if (task_nice(tsk) > 0)
cpustat[CPUTIME_NICE] += vtime->utime + delta;
else
cpustat[CPUTIME_USER] += vtime->utime + delta;
} else {
WARN_ON_ONCE(vtime->state != VTIME_GUEST);
if (task_nice(tsk) > 0) {
cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
cpustat[CPUTIME_NICE] += vtime->gtime + delta;
} else {
cpustat[CPUTIME_GUEST] += vtime->gtime + delta;
cpustat[CPUTIME_USER] += vtime->gtime + delta;
}
}
} while (read_seqcount_retry(&vtime->seqcount, seq));
return err;
}
void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
{
const struct kernel_cpustat *src = &kcpustat_cpu(cpu);
struct rq *rq;
int err;
if (!vtime_accounting_enabled_cpu(cpu)) {
*dst = *src;
return;
}
rq = cpu_rq(cpu);
for (;;) {
struct task_struct *curr;
rcu_read_lock();
curr = rcu_dereference(rq->curr);
if (WARN_ON_ONCE(!curr)) {
rcu_read_unlock();
*dst = *src;
return;
}
err = kcpustat_cpu_fetch_vtime(dst, src, curr, cpu);
rcu_read_unlock();
if (!err)
return;
cpu_relax();
}
}
EXPORT_SYMBOL_GPL(kcpustat_cpu_fetch);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */