linux_dsm_epyc7002/kernel/sched/cputime.c

913 lines
23 KiB
C
Raw Normal View History

#include <linux/export.h>
#include <linux/sched.h>
#include <linux/tsacct_kern.h>
#include <linux/kernel_stat.h>
#include <linux/static_key.h>
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#include <linux/context_tracking.h>
#include "sched.h"
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#endif
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
/*
* There are no locks covering percpu hardirq/softirq time.
* They are only modified in vtime_account, on corresponding CPU
* with interrupts disabled. So, writes are safe.
* They are read and saved off onto struct rq in update_rq_clock().
* This may result in other CPU reading this CPU's irq time and can
* race with irq/vtime_account on this CPU. We would either get old
* or new value with a side effect of accounting a slice of irq time to wrong
* task when irq is in progress while we read rq->clock. That is a worthy
* compromise in place of having locks on each irq in account_system_time.
*/
DEFINE_PER_CPU(u64, cpu_hardirq_time);
DEFINE_PER_CPU(u64, cpu_softirq_time);
static DEFINE_PER_CPU(u64, irq_start_time);
static int sched_clock_irqtime;
void enable_sched_clock_irqtime(void)
{
sched_clock_irqtime = 1;
}
void disable_sched_clock_irqtime(void)
{
sched_clock_irqtime = 0;
}
#ifndef CONFIG_64BIT
DEFINE_PER_CPU(seqcount_t, irq_time_seq);
#endif /* CONFIG_64BIT */
/*
* Called before incrementing preempt_count on {soft,}irq_enter
* and before decrementing preempt_count on {soft,}irq_exit.
*/
void irqtime_account_irq(struct task_struct *curr)
{
s64 delta;
int cpu;
if (!sched_clock_irqtime)
return;
cpu = smp_processor_id();
delta = sched_clock_cpu(cpu) - __this_cpu_read(irq_start_time);
__this_cpu_add(irq_start_time, delta);
irq_time_write_begin();
/*
* We do not account for softirq time from ksoftirqd here.
* We want to continue accounting softirq time to ksoftirqd thread
* in that case, so as not to confuse scheduler with a special task
* that do not consume any time, but still wants to run.
*/
if (hardirq_count())
__this_cpu_add(cpu_hardirq_time, delta);
else if (in_serving_softirq() && curr != this_cpu_ksoftirqd())
__this_cpu_add(cpu_softirq_time, delta);
irq_time_write_end();
}
EXPORT_SYMBOL_GPL(irqtime_account_irq);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
static cputime_t irqtime_account_hi_update(cputime_t maxtime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
unsigned long flags;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime_t irq_cputime;
local_irq_save(flags);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
irq_cputime = nsecs_to_cputime64(this_cpu_read(cpu_hardirq_time)) -
cpustat[CPUTIME_IRQ];
irq_cputime = min(irq_cputime, maxtime);
cpustat[CPUTIME_IRQ] += irq_cputime;
local_irq_restore(flags);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
return irq_cputime;
}
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
static cputime_t irqtime_account_si_update(cputime_t maxtime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
unsigned long flags;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime_t softirq_cputime;
local_irq_save(flags);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
softirq_cputime = nsecs_to_cputime64(this_cpu_read(cpu_softirq_time)) -
cpustat[CPUTIME_SOFTIRQ];
softirq_cputime = min(softirq_cputime, maxtime);
cpustat[CPUTIME_SOFTIRQ] += softirq_cputime;
local_irq_restore(flags);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
return softirq_cputime;
}
#else /* CONFIG_IRQ_TIME_ACCOUNTING */
#define sched_clock_irqtime (0)
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
static cputime_t irqtime_account_hi_update(cputime_t dummy)
{
return 0;
}
static cputime_t irqtime_account_si_update(cputime_t dummy)
{
return 0;
}
#endif /* !CONFIG_IRQ_TIME_ACCOUNTING */
static inline void task_group_account_field(struct task_struct *p, int index,
u64 tmp)
{
/*
* Since all updates are sure to touch the root cgroup, we
* get ourselves ahead and touch it first. If the root cgroup
* is the only cgroup, then nothing else should be necessary.
*
*/
__this_cpu_add(kernel_cpustat.cpustat[index], tmp);
cpuacct_account_field(p, index, tmp);
}
/*
* Account user cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @cputime: the cpu time spent in user space since the last update
* @cputime_scaled: cputime scaled by cpu frequency
*/
void account_user_time(struct task_struct *p, cputime_t cputime,
cputime_t cputime_scaled)
{
int index;
/* Add user time to process. */
p->utime += cputime;
p->utimescaled += cputime_scaled;
account_group_user_time(p, cputime);
index = (task_nice(p) > 0) ? CPUTIME_NICE : CPUTIME_USER;
/* Add user time to cpustat. */
task_group_account_field(p, index, (__force u64) cputime);
/* Account for user time used */
acct_account_cputime(p);
}
/*
* Account guest cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @cputime: the cpu time spent in virtual machine since the last update
* @cputime_scaled: cputime scaled by cpu frequency
*/
static void account_guest_time(struct task_struct *p, cputime_t cputime,
cputime_t cputime_scaled)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
/* Add guest time to process. */
p->utime += cputime;
p->utimescaled += cputime_scaled;
account_group_user_time(p, cputime);
p->gtime += cputime;
/* Add guest time to cpustat. */
if (task_nice(p) > 0) {
cpustat[CPUTIME_NICE] += (__force u64) cputime;
cpustat[CPUTIME_GUEST_NICE] += (__force u64) cputime;
} else {
cpustat[CPUTIME_USER] += (__force u64) cputime;
cpustat[CPUTIME_GUEST] += (__force u64) cputime;
}
}
/*
* Account system cpu time to a process and desired cpustat field
* @p: the process that the cpu time gets accounted to
* @cputime: the cpu time spent in kernel space since the last update
* @cputime_scaled: cputime scaled by cpu frequency
* @target_cputime64: pointer to cpustat field that has to be updated
*/
static inline
void __account_system_time(struct task_struct *p, cputime_t cputime,
cputime_t cputime_scaled, int index)
{
/* Add system time to process. */
p->stime += cputime;
p->stimescaled += cputime_scaled;
account_group_system_time(p, cputime);
/* Add system time to cpustat. */
task_group_account_field(p, index, (__force u64) cputime);
/* Account for system time used */
acct_account_cputime(p);
}
/*
* Account system cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @hardirq_offset: the offset to subtract from hardirq_count()
* @cputime: the cpu time spent in kernel space since the last update
* @cputime_scaled: cputime scaled by cpu frequency
*/
void account_system_time(struct task_struct *p, int hardirq_offset,
cputime_t cputime, cputime_t cputime_scaled)
{
int index;
if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0)) {
account_guest_time(p, cputime, cputime_scaled);
return;
}
if (hardirq_count() - hardirq_offset)
index = CPUTIME_IRQ;
else if (in_serving_softirq())
index = CPUTIME_SOFTIRQ;
else
index = CPUTIME_SYSTEM;
__account_system_time(p, cputime, cputime_scaled, index);
}
/*
* Account for involuntary wait time.
* @cputime: the cpu time spent in involuntary wait
*/
void account_steal_time(cputime_t cputime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
cpustat[CPUTIME_STEAL] += (__force u64) cputime;
}
/*
* Account for idle time.
* @cputime: the cpu time spent in idle wait
*/
void account_idle_time(cputime_t cputime)
{
u64 *cpustat = kcpustat_this_cpu->cpustat;
struct rq *rq = this_rq();
if (atomic_read(&rq->nr_iowait) > 0)
cpustat[CPUTIME_IOWAIT] += (__force u64) cputime;
else
cpustat[CPUTIME_IDLE] += (__force u64) cputime;
}
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
static __always_inline cputime_t steal_account_process_time(cputime_t maxtime)
{
#ifdef CONFIG_PARAVIRT
if (static_key_false(&paravirt_steal_enabled)) {
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime_t steal_cputime;
u64 steal;
steal = paravirt_steal_clock(smp_processor_id());
steal -= this_rq()->prev_steal_time;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
steal_cputime = min(nsecs_to_cputime(steal), maxtime);
account_steal_time(steal_cputime);
this_rq()->prev_steal_time += cputime_to_nsecs(steal_cputime);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
return steal_cputime;
}
#endif
return 0;
}
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
/*
* Account how much elapsed time was spent in steal, irq, or softirq time.
*/
static inline cputime_t account_other_time(cputime_t max)
{
cputime_t accounted;
accounted = steal_account_process_time(max);
if (accounted < max)
accounted += irqtime_account_hi_update(max - accounted);
if (accounted < max)
accounted += irqtime_account_si_update(max - accounted);
return accounted;
}
/*
* Accumulate raw cputime values of dead tasks (sig->[us]time) and live
* tasks (sum on group iteration) belonging to @tsk's group.
*/
void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
{
struct signal_struct *sig = tsk->signal;
cputime_t utime, stime;
struct task_struct *t;
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
unsigned int seq, nextseq;
unsigned long flags;
rcu_read_lock();
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
/* Attempt a lockless read on the first round. */
nextseq = 0;
do {
seq = nextseq;
flags = read_seqbegin_or_lock_irqsave(&sig->stats_lock, &seq);
time, signal: Protect resource use statistics with seqlock Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-17 00:40:10 +07:00
times->utime = sig->utime;
times->stime = sig->stime;
times->sum_exec_runtime = sig->sum_sched_runtime;
for_each_thread(tsk, t) {
task_cputime(t, &utime, &stime);
times->utime += utime;
times->stime += stime;
times->sum_exec_runtime += task_sched_runtime(t);
}
/* If lockless access failed, take the lock. */
nextseq = 1;
} while (need_seqretry(&sig->stats_lock, seq));
done_seqretry_irqrestore(&sig->stats_lock, seq, flags);
rcu_read_unlock();
}
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
/*
* Account a tick to a process and cpustat
* @p: the process that the cpu time gets accounted to
* @user_tick: is the tick from userspace
* @rq: the pointer to rq
*
* Tick demultiplexing follows the order
* - pending hardirq update
* - pending softirq update
* - user_time
* - idle_time
* - system time
* - check for guest_time
* - else account as system_time
*
* Check for hardirq is done both for system and user time as there is
* no timer going off while we are on hardirq and hence we may never get an
* opportunity to update it solely in system time.
* p->stime and friends are only updated on system time and not on irq
* softirq as those do not count in task exec_runtime any more.
*/
static void irqtime_account_process_tick(struct task_struct *p, int user_tick,
struct rq *rq, int ticks)
{
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
u64 cputime = (__force u64) cputime_one_jiffy * ticks;
cputime_t scaled, other;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
/*
* When returning from idle, many ticks can get accounted at
* once, including some ticks of steal, irq, and softirq time.
* Subtract those ticks from the amount of time accounted to
* idle, or potentially user or system time. Due to rounding,
* other time can exceed ticks occasionally.
*/
other = account_other_time(cputime);
if (other >= cputime)
return;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime -= other;
scaled = cputime_to_scaled(cputime);
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
if (this_cpu_ksoftirqd() == p) {
/*
* ksoftirqd time do not get accounted in cpu_softirq_time.
* So, we have to handle it separately here.
* Also, p->stime needs to be updated for ksoftirqd.
*/
__account_system_time(p, cputime, scaled, CPUTIME_SOFTIRQ);
} else if (user_tick) {
account_user_time(p, cputime, scaled);
} else if (p == rq->idle) {
account_idle_time(cputime);
} else if (p->flags & PF_VCPU) { /* System time or guest time */
account_guest_time(p, cputime, scaled);
} else {
__account_system_time(p, cputime, scaled, CPUTIME_SYSTEM);
}
}
static void irqtime_account_idle_ticks(int ticks)
{
struct rq *rq = this_rq();
irqtime_account_process_tick(current, 0, rq, ticks);
}
#else /* CONFIG_IRQ_TIME_ACCOUNTING */
static inline void irqtime_account_idle_ticks(int ticks) {}
static inline void irqtime_account_process_tick(struct task_struct *p, int user_tick,
struct rq *rq, int nr_ticks) {}
#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
/*
* Use precise platform statistics if available:
*/
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
#ifndef __ARCH_HAS_VTIME_TASK_SWITCH
void vtime_common_task_switch(struct task_struct *prev)
{
if (is_idle_task(prev))
vtime_account_idle(prev);
else
vtime_account_system(prev);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
vtime_account_user(prev);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#endif
arch_vtime_task_switch(prev);
}
#endif
#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Archs that account the whole time spent in the idle task
* (outside irq) as idle time can rely on this and just implement
* vtime_account_system() and vtime_account_idle(). Archs that
* have other meaning of the idle time (s390 only includes the
* time spent by the CPU when it's in low power mode) must override
* vtime_account().
*/
#ifndef __ARCH_HAS_VTIME_ACCOUNT
void vtime_account_irq_enter(struct task_struct *tsk)
{
if (!in_interrupt() && is_idle_task(tsk))
vtime_account_idle(tsk);
else
vtime_account_system(tsk);
}
EXPORT_SYMBOL_GPL(vtime_account_irq_enter);
#endif /* __ARCH_HAS_VTIME_ACCOUNT */
void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st)
{
*ut = p->utime;
*st = p->stime;
}
EXPORT_SYMBOL_GPL(task_cputime_adjusted);
void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st)
{
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
*ut = cputime.utime;
*st = cputime.stime;
}
#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
/*
* Account a single tick of cpu time.
* @p: the process that the cpu time gets accounted to
* @user_tick: indicates if the tick is a user or a system tick
*/
void account_process_tick(struct task_struct *p, int user_tick)
{
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime_t cputime, scaled, steal;
struct rq *rq = this_rq();
if (vtime_accounting_cpu_enabled())
return;
if (sched_clock_irqtime) {
irqtime_account_process_tick(p, user_tick, rq, 1);
return;
}
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime = cputime_one_jiffy;
steal = steal_account_process_time(cputime);
if (steal >= cputime)
return;
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
cputime -= steal;
scaled = cputime_to_scaled(cputime);
if (user_tick)
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
account_user_time(p, cputime, scaled);
else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
account_system_time(p, HARDIRQ_OFFSET, cputime, scaled);
else
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
account_idle_time(cputime);
}
/*
* Account multiple ticks of idle time.
* @ticks: number of stolen ticks
*/
void account_idle_ticks(unsigned long ticks)
{
cputime_t cputime, steal;
if (sched_clock_irqtime) {
irqtime_account_idle_ticks(ticks);
return;
}
cputime = jiffies_to_cputime(ticks);
steal = steal_account_process_time(cputime);
if (steal >= cputime)
return;
cputime -= steal;
account_idle_time(cputime);
}
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
/*
* Perform (stime * rtime) / total, but avoid multiplication overflow by
* loosing precision when the numbers are big.
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
*/
static cputime_t scale_stime(u64 stime, u64 rtime, u64 total)
{
u64 scaled;
for (;;) {
/* Make sure "rtime" is the bigger of stime/rtime */
if (stime > rtime)
swap(rtime, stime);
/* Make sure 'total' fits in 32 bits */
if (total >> 32)
goto drop_precision;
/* Does rtime (and thus stime) fit in 32 bits? */
if (!(rtime >> 32))
break;
/* Can we just balance rtime/stime rather than dropping bits? */
if (stime >> 31)
goto drop_precision;
/* We can grow stime and shrink rtime and try to make them both fit */
stime <<= 1;
rtime >>= 1;
continue;
drop_precision:
/* We drop from rtime, it has more bits than stime */
rtime >>= 1;
total >>= 1;
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
}
/*
* Make sure gcc understands that this is a 32x32->64 multiply,
* followed by a 64/32->64 divide.
*/
scaled = div_u64((u64) (u32) stime * (u64) (u32) rtime, (u32)total);
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
return (__force cputime_t) scaled;
}
/*
* Adjust tick based cputime random precision against scheduler runtime
* accounting.
*
* Tick based cputime accounting depend on random scheduling timeslices of a
* task to be interrupted or not by the timer. Depending on these
* circumstances, the number of these interrupts may be over or
* under-optimistic, matching the real user and system cputime with a variable
* precision.
*
* Fix this by scaling these tick based values against the total runtime
* accounted by the CFS scheduler.
*
* This code provides the following guarantees:
*
* stime + utime == rtime
* stime_i+1 >= stime_i, utime_i+1 >= utime_i
*
* Assuming that rtime_i+1 >= rtime_i.
*/
static void cputime_adjust(struct task_cputime *curr,
struct prev_cputime *prev,
cputime_t *ut, cputime_t *st)
{
cputime_t rtime, stime, utime;
unsigned long flags;
/* Serialize concurrent callers such that we can honour our guarantees */
raw_spin_lock_irqsave(&prev->lock, flags);
rtime = nsecs_to_cputime(curr->sum_exec_runtime);
/*
* This is possible under two circumstances:
* - rtime isn't monotonic after all (a bug);
* - we got reordered by the lock.
*
* In both cases this acts as a filter such that the rest of the code
* can assume it is monotonic regardless of anything else.
*/
if (prev->stime + prev->utime >= rtime)
goto out;
stime = curr->stime;
utime = curr->utime;
/*
* If either stime or both stime and utime are 0, assume all runtime is
* userspace. Once a task gets some ticks, the monotonicy code at
* 'update' will ensure things converge to the observed ratio.
*/
if (stime == 0) {
utime = rtime;
goto update;
}
if (utime == 0) {
stime = rtime;
goto update;
sched: Lower chances of cputime scaling overflow Some users have reported that after running a process with hundreds of threads on intensive CPU-bound loads, the cputime of the group started to freeze after a few days. This is due to how we scale the tick-based cputime against the scheduler precise execution time value. We add the values of all threads in the group and we multiply that against the sum of the scheduler exec runtime of the whole group. This easily overflows after a few days/weeks of execution. A proposed solution to solve this was to compute that multiplication on stime instead of utime: 62188451f0d63add7ad0cd2a1ae269d600c1663d ("cputime: Avoid multiplication overflow on utime scaling") The rationale behind that was that it's easy for a thread to spend most of its time in userspace under intensive CPU-bound workload but it's much harder to do CPU-bound intensive long run in the kernel. This postulate got defeated when a user recently reported he was still seeing cputime freezes after the above patch. The workload that triggers this issue relates to intensive networking workloads where most of the cputime is consumed in the kernel. To reduce much more the opportunities for multiplication overflow, lets reduce the multiplication factors to the remainders of the division between sched exec runtime and cputime. Assuming the difference between these shouldn't ever be that large, it could work on many situations. This gets the same results as in the upstream scaling code except for a small difference: the upstream code always rounds the results to the nearest integer not greater to what would be the precise result. The new code rounds to the nearest integer either greater or not greater. In practice this difference probably shouldn't matter but it's worth mentioning. If this solution appears not to be enough in the end, we'll need to partly revert back to the behaviour prior to commit 0cf55e1ec08bb5a22e068309e2d8ba1180ab4239 ("sched, cputime: Introduce thread_group_times()") Back then, the scaling was done on exit() time before adding the cputime of an exiting thread to the signal struct. And then we'll need to scale one-by-one the live threads cputime in thread_group_cputime(). The drawback may be a slightly slower code on exit time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-02-21 00:54:55 +07:00
}
stime = scale_stime((__force u64)stime, (__force u64)rtime,
(__force u64)(stime + utime));
update:
/*
* Make sure stime doesn't go backwards; this preserves monotonicity
* for utime because rtime is monotonic.
*
* utime_i+1 = rtime_i+1 - stime_i
* = rtime_i+1 - (rtime_i - utime_i)
* = (rtime_i+1 - rtime_i) + utime_i
* >= utime_i
*/
if (stime < prev->stime)
stime = prev->stime;
utime = rtime - stime;
/*
* Make sure utime doesn't go backwards; this still preserves
* monotonicity for stime, analogous argument to above.
*/
if (utime < prev->utime) {
utime = prev->utime;
stime = rtime - utime;
}
prev->stime = stime;
prev->utime = utime;
out:
*ut = prev->utime;
*st = prev->stime;
raw_spin_unlock_irqrestore(&prev->lock, flags);
}
void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st)
{
struct task_cputime cputime = {
.sum_exec_runtime = p->se.sum_exec_runtime,
};
task_cputime(p, &cputime.utime, &cputime.stime);
cputime_adjust(&cputime, &p->prev_cputime, ut, st);
}
EXPORT_SYMBOL_GPL(task_cputime_adjusted);
void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st)
{
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
cputime_adjust(&cputime, &p->signal->prev_cputime, ut, st);
}
#endif /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
static cputime_t vtime_delta(struct task_struct *tsk)
{
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
unsigned long now = READ_ONCE(jiffies);
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
if (time_before(now, (unsigned long)tsk->vtime_snap))
return 0;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
return jiffies_to_cputime(now - tsk->vtime_snap);
}
static cputime_t get_vtime_delta(struct task_struct *tsk)
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
{
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
unsigned long now = READ_ONCE(jiffies);
cputime_t delta, other;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
sched/cputime: Count actually elapsed irq & softirq time Currently, if there was any irq or softirq time during 'ticks' jiffies, the entire period will be accounted as irq or softirq time. This is inaccurate if only a subset of the time was actually spent handling irqs, and could conceivably mis-count all of the ticks during a period as irq time, when there was some irq and some softirq time. This can actually happen when irqtime_account_process_tick is called from account_idle_ticks, which can pass a larger number of ticks down all at once. Fix this by changing irqtime_account_hi_update(), irqtime_account_si_update(), and steal_account_process_ticks() to work with cputime_t time units, and return the amount of time spent in each mode. Rename steal_account_process_ticks() to steal_account_process_time(), to reflect that time is now accounted in cputime_t, instead of ticks. Additionally, have irqtime_account_process_tick() take into account how much time was spent in each of steal, irq, and softirq time. The latter could help improve the accuracy of cputime accounting when returning from idle on a NO_HZ_IDLE CPU. Properly accounting how much time was spent in hardirq and softirq time will also allow the NO_HZ_FULL code to re-use these same functions for hardirq and softirq accounting. Signed-off-by: Rik van Riel <riel@redhat.com> [ Make nsecs_to_cputime64() actually return cputime64_t. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1468421405-20056-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 21:50:01 +07:00
delta = jiffies_to_cputime(now - tsk->vtime_snap);
other = account_other_time(delta);
WARN_ON_ONCE(tsk->vtime_snap_whence == VTIME_INACTIVE);
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
tsk->vtime_snap = now;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
return delta - other;
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
}
static void __vtime_account_system(struct task_struct *tsk)
{
cputime_t delta_cpu = get_vtime_delta(tsk);
account_system_time(tsk, irq_count(), delta_cpu, cputime_to_scaled(delta_cpu));
}
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
void vtime_account_system(struct task_struct *tsk)
{
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
if (!vtime_delta(tsk))
return;
write_seqcount_begin(&tsk->vtime_seqcount);
__vtime_account_system(tsk);
write_seqcount_end(&tsk->vtime_seqcount);
}
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
void vtime_account_user(struct task_struct *tsk)
{
cputime_t delta_cpu;
write_seqcount_begin(&tsk->vtime_seqcount);
tsk->vtime_snap_whence = VTIME_SYS;
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
if (vtime_delta(tsk)) {
delta_cpu = get_vtime_delta(tsk);
account_user_time(tsk, delta_cpu, cputime_to_scaled(delta_cpu));
}
write_seqcount_end(&tsk->vtime_seqcount);
}
void vtime_user_enter(struct task_struct *tsk)
{
write_seqcount_begin(&tsk->vtime_seqcount);
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
if (vtime_delta(tsk))
__vtime_account_system(tsk);
tsk->vtime_snap_whence = VTIME_USER;
write_seqcount_end(&tsk->vtime_seqcount);
}
void vtime_guest_enter(struct task_struct *tsk)
{
/*
* The flags must be updated under the lock with
* the vtime_snap flush and update.
* That enforces a right ordering and update sequence
* synchronization against the reader (task_gtime())
* that can thus safely catch up with a tickless delta.
*/
write_seqcount_begin(&tsk->vtime_seqcount);
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
if (vtime_delta(tsk))
__vtime_account_system(tsk);
current->flags |= PF_VCPU;
write_seqcount_end(&tsk->vtime_seqcount);
}
EXPORT_SYMBOL_GPL(vtime_guest_enter);
void vtime_guest_exit(struct task_struct *tsk)
{
write_seqcount_begin(&tsk->vtime_seqcount);
__vtime_account_system(tsk);
current->flags &= ~PF_VCPU;
write_seqcount_end(&tsk->vtime_seqcount);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
}
EXPORT_SYMBOL_GPL(vtime_guest_exit);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
void vtime_account_idle(struct task_struct *tsk)
{
cputime_t delta_cpu = get_vtime_delta(tsk);
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
account_idle_time(delta_cpu);
}
void arch_vtime_task_switch(struct task_struct *prev)
{
write_seqcount_begin(&prev->vtime_seqcount);
prev->vtime_snap_whence = VTIME_INACTIVE;
write_seqcount_end(&prev->vtime_seqcount);
write_seqcount_begin(&current->vtime_seqcount);
current->vtime_snap_whence = VTIME_SYS;
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
current->vtime_snap = jiffies;
write_seqcount_end(&current->vtime_seqcount);
}
void vtime_init_idle(struct task_struct *t, int cpu)
{
unsigned long flags;
local_irq_save(flags);
write_seqcount_begin(&t->vtime_seqcount);
t->vtime_snap_whence = VTIME_SYS;
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11 08:08:27 +07:00
t->vtime_snap = jiffies;
write_seqcount_end(&t->vtime_seqcount);
local_irq_restore(flags);
}
cputime_t task_gtime(struct task_struct *t)
{
unsigned int seq;
cputime_t gtime;
if (!vtime_accounting_enabled())
sched/cputime: Fix invalid gtime in proc /proc/stats shows invalid gtime when the thread is running in guest. When vtime accounting is not enabled, we cannot get a valid delta. The delta is calculated with now - tsk->vtime_snap, but tsk->vtime_snap is only updated when vtime accounting is runtime enabled. This patch makes task_gtime() just return gtime without computing the buggy non-existing tickless delta when vtime accounting is not enabled. Use context_tracking_is_enabled() to check if vtime is accounting on some cpu, in which case only we need to check the tickless delta. This way we fix the gtime value regression on machines not running nohz full. The kernel config contains CONFIG_VIRT_CPU_ACCOUNTING_GEN=y and CONFIG_NO_HZ_FULL_ALL=n and boot without nohz_full. I ran and stop a busy loop in VM and see the gtime in host. Dump the 43rd field which shows the gtime in every second: # while :; do awk '{print $3" "$43}' /proc/3955/task/4014/stat; sleep 1; done S 4348 R 7064566 R 7064766 R 7064967 R 7065168 S 4759 S 4759 During running busy loop, it returns large value. After applying this patch, we can see right gtime. # while :; do awk '{print $3" "$43}' /proc/10913/task/10956/stat; sleep 1; done S 5338 R 5365 R 5465 R 5566 R 5666 S 5726 S 5726 Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1447948054-28668-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-19 22:47:28 +07:00
return t->gtime;
do {
seq = read_seqcount_begin(&t->vtime_seqcount);
gtime = t->gtime;
if (t->vtime_snap_whence == VTIME_SYS && t->flags & PF_VCPU)
gtime += vtime_delta(t);
} while (read_seqcount_retry(&t->vtime_seqcount, seq));
return gtime;
}
/*
* Fetch cputime raw values from fields of task_struct and
* add up the pending nohz execution time since the last
* cputime snapshot.
*/
static void
fetch_task_cputime(struct task_struct *t,
cputime_t *u_dst, cputime_t *s_dst,
cputime_t *u_src, cputime_t *s_src,
cputime_t *udelta, cputime_t *sdelta)
{
unsigned int seq;
unsigned long long delta;
do {
*udelta = 0;
*sdelta = 0;
seq = read_seqcount_begin(&t->vtime_seqcount);
if (u_dst)
*u_dst = *u_src;
if (s_dst)
*s_dst = *s_src;
/* Task is sleeping, nothing to add */
if (t->vtime_snap_whence == VTIME_INACTIVE ||
is_idle_task(t))
continue;
delta = vtime_delta(t);
/*
* Task runs either in user or kernel space, add pending nohz time to
* the right place.
*/
if (t->vtime_snap_whence == VTIME_USER || t->flags & PF_VCPU) {
*udelta = delta;
} else {
if (t->vtime_snap_whence == VTIME_SYS)
*sdelta = delta;
}
} while (read_seqcount_retry(&t->vtime_seqcount, seq));
}
void task_cputime(struct task_struct *t, cputime_t *utime, cputime_t *stime)
{
cputime_t udelta, sdelta;
if (!vtime_accounting_enabled()) {
if (utime)
*utime = t->utime;
if (stime)
*stime = t->stime;
return;
}
fetch_task_cputime(t, utime, stime, &t->utime,
&t->stime, &udelta, &sdelta);
if (utime)
*utime += udelta;
if (stime)
*stime += sdelta;
}
void task_cputime_scaled(struct task_struct *t,
cputime_t *utimescaled, cputime_t *stimescaled)
{
cputime_t udelta, sdelta;
if (!vtime_accounting_enabled()) {
if (utimescaled)
*utimescaled = t->utimescaled;
if (stimescaled)
*stimescaled = t->stimescaled;
return;
}
fetch_task_cputime(t, utimescaled, stimescaled,
&t->utimescaled, &t->stimescaled, &udelta, &sdelta);
if (utimescaled)
*utimescaled += cputime_to_scaled(udelta);
if (stimescaled)
*stimescaled += cputime_to_scaled(sdelta);
}
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-07-25 12:56:04 +07:00
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */